Mars Rover 2 - Massachusetts Institute of Technology

Mars Rover 2.0 Building Instructions Unified Computers & Programming, Fall 2005

Mars Rover 2.0 Building Instructions

BACK

FRONT

Design & Instructions by: David Wang Diagrams & Instructions generated by: MLCad, LPub, L3P, and POV-Ray

Page 1 of 19


Bill of Materials You will need all of these parts in order to build your rover. The colors of the bricks and plates may vary. The colors of the other pieces are significant.

Page 2 of 19


Step 1:

Step 2:

Page 3 of 19


Step 3:

Step 4:

Page 4 of 19


Step 5:

Step 6:

Page 5 of 19


Step 7:

Step 8:

Page 6 of 19


Step 9:

Step 10:

Page 7 of 19


Step 11:

Step 12:

Page 8 of 19


Step 13:

Step 14:

Page 9 of 19


Step 15:

Step 16:

Page 10 of 19


Step 17:

Step 18:

Page 11 of 19


Step 19:

Symmetric

Step 20:

Page 12 of 19


Step 21:

Symmetric to Step 20

Step 22:

Page 13 of 19


Step 23:

Step 24: Rotate the Assembly

Page 14 of 19


Step 25:

The rails on the 1x2 plates side into slots in the motor.

Step 26:

Page 15 of 19


Step 27:

Step 28:

Page 16 of 19


Step 29:

Step 30: Rotate the Assembly

Page 17 of 19


Step 31:

Step 33:

Page 18 of 19


Step 34: Connect the Wiring Connect A to A, 1 to 1, etc… Make sure the wires are oriented as indicated by the wire stubs in the drawing.

1A

AB

1B3 23

Page 19 of 19

Documents

Mars Rover 2 - Massachusetts Institute of Technology