Upload
others
View
7
Download
0
Embed Size (px)
Citation preview
www.brettmartin.com
Marlon CST Longlife corrugated multiwall polycarbonate sheet provides all the characteristics of our standard corrugated sheet with the added benefit of insulation from the multiwall structure. All of this along with added co-extruded Longlife protection from the effects of UV weathering makes the product ideal for a wide variety of applications.
Marlon CST can be used with fibre cement sheeting or as a complete roof and wall sheeting material.
• Thicknesses: 6mm
• Structure/Profile: Triplewall 177/51
• Tints: Clear, Glass Clear, Opal, Pearlescent Glass,
• Protective Coatings: Double sided UV protection
• Other: Mitred corner option
OPTIONS
• Rooflights
• Vertical Glazing
• Screens and Partitions
• Cladding
• Agricultural Buildings
• Commercial Greenhouses
• Garden Centres
APPLICATIONS
MAIN BENEFITS
• High light transmission
• Damage & impact resistant
• 200 times stronger than glass
• Excellent structural durability
• Thermally insulating
• Energy saving
• Lightweight and easy to handle
• Weatherable and UV resistant
• Performs well in extreme temperatures
• Excellent fire performance
• Chemical resistant
• 10 year light transmission and 3 year weather breakage warranty
CONSTRUCTION AGRICULTURE
APPLICATIONS
MARLON CST LONGLIFE
FIRE PERFORMANCE
REMEMBER
Marlon polycarbonate is also available in a range of structured, flat and profiled multiwall sheet options. A range of accessories is also available. For further details please visit our website.
All reasonable care has been taken in the compilation of the information contained within this literature. All recommendations on the use of our products are made without guarantee as conditions of use are beyond the control of Brett Martin. It is the customer’s responsibility to ensure that the product is fit for its intended purpose and that the actual conditions of use are suitable. Brett Martin pursues a policy of continuous product development and reserves the right to amend specifications without prior notice. The photographs used are for illustration purposes only and simply indicate possible uses of Marlon CS profiled sheet. Marlon is a registered trademark of Brett Martin Ltd.
10YEAR
BR
ETT
MARTIN POLYCARBON
AT
E
LIG
HT
TRANSMISSION WARRAN
TY
3YEAR
BR
ETT
MARTIN POLYCARBON
AT
E
WE
AT
H
ERBREAKAGE WARRA
NT
Y
WARRANTY
TEST METHOD CLASSIFICATION
DIN4102 B1
Marlon CST will in most cases meet the following classifications
For further details please contact our technical department.
For information on a specific project please contact our technical department.
SUPPORT CENTRES AND COVER WIDTHS
(Wind load of 1.0kN/m2 assumed)
PROFILE SHEET THICKNESS SHEET WIDTH COVER WIDTH
177/51 TRW 6mm 920mm 708mm
177/51 TRW 6mm 1097mm 885mm
177/51 TRW 6mm 1152mm 930mm
TYPICAL PROPERTIES
STRUCTURE / PROFILE THICKNESS WEIGHT U-VALUE
177/51 TRIPLEWALL 6mm 2000 3.3
SPANNING
Marlon CST should be crown fixed to purlins at the following maximum centres for the applied loads:
WIND LOAD SUPPORT CENTRE
0.6kN/m2 1500mm
0.9kN/m2 1300mm
1.3kN/m2 1100mm
COLOURS
CLEAR 79%
GLASS CLEAR 77%
PEARLESCENT GLASS 53%
OPAL 38%
PHYSICAL PROPERTIES
PROPERTIES TEST METHOD VALUE UNITS
Mechanical Properties Tensile strength at yield DIN 53455 >60 N/mm2
Tensile Strength at break DIN 53455 >70 N/mm2
Elongation at yield DIN 53455 6-8 %
Elongation at break DIN 53455 >100 %
Modulus of elasticity DIN 53457 >2300 N/mm2
Notched impact strength DIN 53453 >50 kJ/m2
Physical Properties Specific gravity DIN 53479 1.20 g/m2
Refractive index nD25 DIN 53491 1.585
Water absorption, 24h @23°C DIN 53495 0.35 %
Water permeability (thickness 1mm) DIN 53122 <2.28 g/m2
Thermal Properties Softening temperature Vicat ‘B’ DIN 53460 145-150 °C
Deflection temperature, load 1.8I N/mm2 DIN 53461 140-145 °C
Linear thermal expansion DIN 53752 6.7X10-5 m/m°K
Thermal conductivity (λ-value) DIN 52612 0.2 W/m°K
Maximum service temperature Permanent 100 °C
- no loading Short Term 130 °C
Brett Martin Plastic SheetsTel +44 (0) 28 9084 9999Fax +44 (0) 28 9083 6666Email [email protected]
www.brettmartin.com
RoHSCo
mpliant
HeavyMetalFree
STANDARD PROFILE
Measured on injection moulded test specimens.
920 1097
177
51
1152
41.4
6
57