LIGHTING CONTROLS LIGHTING CONTROLS MANUAL TIME SWITCHES 93000, TS-200 SERIES 2004 KELE CATALOG • www.kele.com • USA 888-397-5353 • International 901-382-6084 380 DESCRIPTION The Marktime 93000 Series Wall-Box Manual Time Switch is a spring-wound, manually set time switch for the control of electrical current. Interchangeable with standard toggle switches to turn circuits either off or on at the end of a preset time period, the 93000 Series is ideally suited for new installations or retrofit projects. FEATURES • White and ivory plates and knobs included with each time switch • Time ranges from minutes to 12 hours, all with ±5% accuracy • Easy-to-install two-wire design to fit into standard single-gang wall box • Heavy motor loads without the need of contactors • Rotary knob operation • Available to turn circuits off or on, with or without manual hold override feature • UL listed, CUL DESCRIPTION The Watt Stopper ® InteliSwitch ® TS-200 Series is a digital time switch that automatically turns the load off after a preset amount of time. The load can be turned off anytime during the timer's countdown by pushing the on/off button. The TS-200 Series has four user-adjustable features: Time-Out Delay The timer can be adjusted to hold the load from five minutes to 12 hours. This is adjusted by setting the DIP switch located on the left side of the unit. Time Scrolling In situations where the load needs to be held on for a different amount of time than the preset time-out period, time scrolling allows the user to manually and temporarily override the time- out period without adjusting the DIP switch. Flash Option If this option is on, the load will flash once, one minute before the time-out period expires. Set this option on the DIP switch. Beeper Option If this option is on, the timer will beep every five seconds during the last minute of the time-out period. Set this option on the DIP switch. ORDERING INFORMATION 93000 SERIES ELECTRICAL RATING 20A 125 VAC 1 hp 10A 277 VAC 7A 125 VAC tungsten MODEL No Hold Previous 93501C (90005/90539) 93502C (90006/90032) 93503C (90008/90024) 93504C (90281/90540) 93505C (90007/90017) 93506C (90001/90015) 93507C (90240/90547) DESCRIPTION 0-15 Min. N.O./N.C. 0-30 Min. N.O./N.C. 0-60 Min. N.O./N.C. 0-120 Min. N.O./N.C. 0-6 Hour N.O./N.C. 0-12 Hour N.O./N.C. 0-4 Hour N.O./N.C. MODEL With Hold Previous 93511C (90012/90543) 93512C (90011/90037) 93513C (90010/90038) 93515C (90017/90548) 93516C (90015/90014) 93517C (90542/90546) DESCRIPTION 0-15 Min. N.O./N.C. (w/hold) 0-30 Min. N.O./N.C. (w/hold) 0-60 Min. N.O./N.C. (w/hold) 0-6 Hour N.O./N.C. (w/hold) 0-12 Hour N.O./N.C. (w/hold) 0-4 Hour N.O./N.C. (w/hold) Weight: 0.4 lb (182g) ORDERING INFORMATION TS-200 TS-200-24 Voltage 120/277 VAC/60 Hz 24 VDC, 24 VAC/60 Hz Load rating 800W tungsten Isolated relay or ballast @ 120 VAC SPDT, 1A @ 30V 1200W ballast @ 277 VAC Time adjust (both models) 5, 15, 30 min.; 1,3, 6, 9, 12 hr SPECIFICATIONS Neutral Ground Ground (capped) (black) Hot Load (red) (red) (black) +24 VDC or 24 VAC 60Hz Return Isolated Relay (green) Normally Closed (orange) Common (yellow) Normally Open TS-200 TS-200-24 Important! 120 VAC Ground - Green 277 VAC Ground - Green/Yellow WIRING MODEL DESCRIPTION TS-400-W Digital Time Switch, 120/277 VAC TS-400-24-W Digital Time Switch, 24 VAC/DC

MARKTIME 93000.pdf

Download PDF Report

Upload
jeancasalarcon
View
66
Download
10

Embed Size (px)

Citation preview

LIG

HTI

NTR

OLS

LIGHTING CONTROLSMANUAL TIME SWITCHES93000, TS-200 SERIES

2004 KELE CATALOG • www.kele.com • USA 888-397-5353 • International 901-382-6084380

DESCRIPTIONThe Marktime 93000 Series Wall-Box Manual Time Switchis a spring-wound, manually set time switch for the control ofelectrical current. Interchangeable with standard toggle switch-es to turn circuits either off or on at the end of a preset timeperiod, the 93000 Series is ideally suited for new installationsor retrofit projects.

FEATURES

• White and ivory plates and knobs included with each time switch

• Time ranges from minutes to 12 hours, all with ±5%accuracy

• Easy-to-install two-wire design to fit into standardsingle-gang wall box

• Heavy motor loads without the need of contactors• Rotary knob operation• Available to turn circuits off or on, with or

without manual hold override feature• UL listed, CUL

DESCRIPTION

The Watt Stopper® InteliSwitch® TS-200 Series is a digitaltime switch that automatically turns the load off after a presetamount of time. The load can be turned off anytime during thetimer's countdown by pushing the on/off button. The TS-200Series has four user-adjustable features:

Time-Out DelayThe timer can be adjusted to hold the load from five minutesto 12 hours. This is adjusted by setting the DIP switch locatedon the left side of the unit.Time ScrollingIn situations where the load needs to be held on for a differentamount of time than the preset time-out period, time scrollingallows the user to manually and temporarily override the time-out period without adjusting the DIP switch.Flash OptionIf this option is on, the load will flash once, one minute beforethe time-out period expires. Set this option on the DIP switch.Beeper OptionIf this option is on, the timer will beep every five seconds dur-ing the last minute of the time-out period. Set this option onthe DIP switch.

ORDERING INFORMATION

93000 SERIESELECTRICAL RATING20A 125 VAC 1 hp10A 277 VAC7A 125 VAC tungsten

MODELNo Hold Previous93501C (90005/90539)93502C (90006/90032)93503C (90008/90024)93504C (90281/90540)93505C (90007/90017)93506C (90001/90015)93507C (90240/90547)

DESCRIPTION

0-15 Min. N.O./N.C.0-30 Min. N.O./N.C.0-60 Min. N.O./N.C.0-120 Min. N.O./N.C.0-6 Hour N.O./N.C.0-12 Hour N.O./N.C.0-4 Hour N.O./N.C.

MODELWith Hold Previous93511C (90012/90543)93512C (90011/90037)93513C (90010/90038) 93515C (90017/90548)93516C (90015/90014)93517C (90542/90546)

DESCRIPTION

0-15 Min. N.O./N.C. (w/hold)0-30 Min. N.O./N.C. (w/hold)0-60 Min. N.O./N.C. (w/hold)

0-6 Hour N.O./N.C. (w/hold)0-12 Hour N.O./N.C. (w/hold)0-4 Hour N.O./N.C. (w/hold)

Weight: 0.4 lb (182g)

ORDERING INFORMATION TS-200 TS-200-24Voltage 120/277 VAC/60 Hz 24 VDC, 24 VAC/60 HzLoad rating 800W tungsten Isolated relay

or ballast @ 120 VAC SPDT, 1A @ 30V1200W ballast @ 277 VAC

Time adjust(both models) 5, 15, 30 min.; 1,3, 6, 9, 12 hr

SPECIFICATIONS

NeutralGroundGround (capped)(black) Hot