oFeatures: a) Steam Temp. 121.0 C at 15 psi.

Specification: As per BS 2646-5:1993. Autoclaves for sterilization in laboratories Methods of Test for function and performance.

The Energy from the water is transferred into high pressure steam inside the Stainless osteel chamber up to 15-psi pressure or 121.0 C temperature. The Chamber

(electrical) is fill with clean water for sterilization. This heat process generated chemical free steam for sterilization.

Temp Controller: Microprocessor based LCD/LED temp. controller ( GMP model optional )

Pressure Controller: Mechanically operated pressure/steam release valve.

Pressure Gauge: Analog Dial type Pressure Gauge

Temperature Sensor: Standard coupling type PT 100 Sensor

Heat Exchanger: The electrical heat exchanger transfer latent heat to the clean fill water to generated steam under pressure.

Water Level control: Low water level cut off electronic circuit protects the electrical heat exchanger from

low water level inside the chamber, this Cut's off the power supply to the heat exchanger.

Steam Out let : Steam generated from the unit is raised and exits thought the electrically operated steam Purging solenoid valve from the outlet ( GMP model)

N.B. : Due to continuous R&D model / specifications may change.Picture shown with optional accessories.

Introduction: “LAB CARE MAKE” make Autoclaves are

designed and fabricated for steam sterilization

process to Kill micro-organism through the

application of saturated steam under pressure to suit

various I.S. standards application in the growing

field of Medical, Agricultural Institution, Bio-

Chemical Industrial, Research laboratories and

Page:01

LAB-CAREINSTRUMENTS & SERVICES

MANUFACTURERS OF: Industrial Oven, Furnaces, CoolingEquipments, Scientific, Surgical,&Laboratory Equipments

N.B. : Due to continuous R&D model / specifications may change.Picture shown with optional accessories.

LAB-CAREINSTRUMENTS & SERVICES

MANUFACTURERS OF: Industrial Oven, Furnaces, CoolingEquipments, Scientific, Surgical,&Laboratory Equipments

Horizontal High Pressure Cylindrical Steam Sterilizer, Single door, electrically operated Parameter: Ø Operating pressure : 1.2 to 1.5 kg/cm2 Ø Operating temperature : 121 to 125°C Ø Partial Vacuum : 10” hg through ejector Ø Full Vacuum : 24” hg – through vacuum pump only- optional Ø Hydro- Test : 2.6 kg/cm2

Features: Ø Fully stainless steel, except stand, panel boiler cover & hinge Ø In build steam generator. Ø Digital temperature indicator cum controller with timer & alarm after completion of

sterilization cycle.

Model Size – Internal Capacity / Drum Power LCC-04’A’ 16” Dia. x 24” Depth 76 Litre / 2 Drum 9 k.w LCC-04’B’ 16” Dia. x 36” Depth 110 Litre / 3 Drum 9 k.w LCC-04’C’ 20” Dia. x 36” Depth 175 Litre / 3 Drum 9 k.w. LCC-04’D’ 20” Dia. x 48” Depth 230 Litre / 4 Drum 18 k.w.

Optional Watering type vacuum pump with S.S Condenser & Starter – 1/3 Hp Fully automatic cycle through microprocessor controller with printer for recording cycle Fully automatic cycle through P.L.C. with printer for recording cycle Additional Door

N.B. : Due to continuous R&D model / specifications may change.Picture shown with optional accessories.

LAB-CAREINSTRUMENTS & SERVICES

MANUFACTURERS OF: Industrial Oven, Furnaces, CoolingEquipments, Scientific, Surgical,&Laboratory Equipments

Vertical High Pressure Autoclaves - Triple wall with steam jacket · Inner and outer chamber made of stainless steel.

· Outer chamber works as steam stock jacket.

· Built-in safety valve, pressure gauge, pressure release valve and water level indicator.

· Pressure adjustable from 5 psi to 20 psi

· Automatic pressure control switch.

· Working temperature 121 C to 127 Deg.Cent Adjustable by Disital Microprocessor base with Inbuilt Timer and

Allarm for High Temperature shootup ,Water Level & End of Cycle alarm

· Stainless steel steam release valve.

· Water level indicating gauge glass with stainless steel guard.

· Electric / Electrique / Eléctricoal cantrol box fitted with switch, indicating lamp.

· Foot paddle lifting devices.

· Hydrotest pressure 2.5kgf/cm sq.g (35psi)

· Sterilizing time 25 to 30 minutes

· Sterilizing pressure 15 psi to 20 psi

Optional :

· Automatic low water cut off device.

· Dial type analogue temperature gauge.

· Radial locking system with paddle lifting device

· Stainless steel basket.

· Pc Interface /Printer Interface with data logger

· Chamber Validation Sensor at four location

Model Size (CMS? Inches) Approx. Capacity (Litres)

LC-03(A) 30 x 50? 12x20 35 Ltrs

LC-03(B) 40 x 60? 16x24 75 ltr.

N.B. : Due to continuous R&D model / specifications may change.Picture shown with optional accessories.

LAB-CAREINSTRUMENTS & SERVICES

MANUFACTURERS OF: Industrial Oven, Furnaces, CoolingEquipments, Scientific, Surgical,&Laboratory Equipments

Vertical High Pressure Autoclaves – Single Leaver Locking · Inner and outer chamber made of stainless steel.

· Inner chamber works as steam stock jacket.

· Built-in safety valve, pressure gauge, pressure release valve and water level indicator.

· Pressure adjustable from 5 psi to 20 psi

· Automatic pressure control switch.

· Working temperature 121 C to 127 Deg.Cent Adjustable by Disital Microprocessor base with Inbuilt Timer and

Allarm for High Temperature shootup ,Water Level & End of Cycle alarm

· Stainless steel steam release valve.

· Water level indicating gauge glass with stainless steel guard.

· Electric / Electrique / Eléctricoal cantrol box fitted with switch, indicating lamp.

· Foot paddle lifting devices.

· Hydrotest pressure 2.5kgf/cm sq.g (35psi)

· Sterilizing time 25 to 30 minutes

· Sterilizing pressure 15 psi to 20 psi

Optional :

· Automatic low water cut off device.

· Dial type analogue temperature gauge.

· Radial locking system with paddle lifting device

· Stainless steel basket.

· Pc Interface /Printer Interface with data logger

· Chamber Validation Sensor at four location

Model Size(Inches) Dia x Ht Liter (Capacity) Rating (KW)

CSL-02 A 12”x20” 35 2.0

LCSL-02 B 14x22 53 3.0

LCSL-02 C 16x24 90 4.0

LCSL-02 D 18x24 95 4.0

CSL-02 E 18x28 111 5.0

L

L

N.B. : Due to continuous R&D model / specifications may change.Picture shown with optional accessories.

LC-02’a’ LC-02’b’ LC-02’c’ LC-02’d’ LC-02’e’ LC-02’f’ LC-02’g’35 53(Ltrs) 90 95 111 125 175

(Inch) Dia-12xHt-20 Dia-14xHt-22 Dia-16xHt-24 Dia-18xHt-24 Dia-18xHt-28 Dia-18xHt-30 Dia-22xHt-30

Working Pressure Range 15 to 20 PSI

55 Std Model

With Semi/Fully Automatic

3000 3000 4000 4000 4500 5000 6000

Optional : - 1.

2. .

3.

Any other sizes or other temp . range available on request

.

4.

5.

Microprocessor Base PID Temperature Controller with PC/Printer Interface available

6.

µp Profile Controller for cyclic applications (Ramp & Soak)

Data Logger with window base PC software with 21cfr and without 21 CFR Software available

Temperatures High Shoot up alarm facility available Digital Timer with battery backup available

OTHERS PRODUCTS

B.O.D INCUBATOR,BIO-SAFETY CABINET,COOLING CABINET,CONTAT TEMP.WATER BATH DEEP-FREEZER,LF,STABILITY CH,PROTEAN DIGESTERS,PLANT GROWTCH.SHAKER BATH,SHAKER INCUBATOR,VACUUM OVEN,HOT AIR OVEN,HOT PLATETRAY DRYER,VISCODITY BATH, WATER BATH,LOW TEMP.CIRCULATING BATH, PHOTO STABILTIY CHAMBER

LAB-CAREINSTRUMENTS & SERVICES

MANUFACTURERS OF: Industrial Oven, Furnaces, CoolingEquipments, Scientific, Surgical,&Laboratory Equipments

Port 1/2”BSP Coupling provided on Lid

Page:02

N.B. : Due to continuous R&D model / specifications may change.Picture shown with optional accessories.

LAB-CAREINSTRUMENTS & SERVICES

MANUFACTURERS OF: Industrial Oven, Furnaces, CoolingEquipments, Scientific, Surgical,&Laboratory Equipments

1. Horizontal Rectangular Steam Sterilizer, Single Door, electrically operated. Parameter: Operating pressure : 1.2 to 1.5 kg/cm² Operating temperature : 121 to 125°C Partial Vacuum : 10” hg Full Vacuum : 26” hg – through vacuum pump only Hydro test : 2.6 kg Features: Fully stainless steel except stand, jacket, panel, door lock/shooting bolt, boiler cover & hinge Hinge type Single Door Digital temperature indicator cum controller cum timer & alarm In built steam generator. Model

Model Size – Internal Width x Height x Depth

Capacity Power

LCR-04’A’ 450 mm x 450 mm x 900 mm 200 Litre 18 k.w LCR-04’B’ 600 mm x 600 mm x 1200 mm 450 Litre 18 k.w LCR-04’C’ 600 mm x 900 mm x 1500 mm 810 Litre 36 k.w

LCR-04’D’ 900 mm x 900 mm x 1500 mm 1275 Litre 36 k.w Optional S.S. loading carriage 1 no. & M.S. Transfer trolley – 2 nos.

Watering type vacuum pump with S.S Condenser & Starter – 3 Hp Fully automatic cycle through microprocessor controller with printer for recording cycle Fully automatic cycle through P.L.C. with printer for recording cycle