Upload
eudes-lucena
View
7
Download
1
Tags:
Embed Size (px)
DESCRIPTION
Manual roteador ovislink
Citation preview
Quick Setup Guide
eLive ARM104-v2
ADSL Modem Router
English
Espaol
Portugus
1
7
13
11OvisLink ARM104-v2 English
Basic Information
Default Settings !! IP Address: 192.168.1.254 !! Subnet Mask: 255.255.255.0 !! Login: admin !! Password: ovislink !! DHCP Range: 192.168.1.x
Important Notice !! If your router is not working, try press the reset button to restore
factorys default settings.
!! On the automatic quick setup; the VPI, VCI, and Encapsulation are displayed for your information. You do not need to make changes.
!! In the Advanced Setup, please remember to press Submit then Save Changes after change settings.
Port Layout
To ADSL Line (Phone Cable)
LAN Ports (Ethernet Cable)
Adapter Connector
On/OFF Switch
Reset
22OvisLink ARM104-v2 English
Front Panel
11.. Plug in the ADSL line to the WAN port and connect the power adapter. 22.. Then, connect computers to the one of the 4 LAN Ports. Finally, flip
the ON/OFF switch upward to turn on the power.
33.. Reboot your PC. This process will allow your PC to renew its IP address.
LED indicator Color Status Meaning
Power Red ON OFF
Power ON Power OFF
LINK Green ON LAN Port is connected
RxD Green Blinking WAN Port Activity
ADSL Green ON Blinking
ADSL connection is established. No ADSL connection
RDY Green Blinking LAN Port Activity
33OvisLink ARM104-v2 English
11.. Right Click on My Network Places to highlight it and select Properties on the Desktop
Setting Up TCP IP (Win98/ME)
22.. The Network dialog box will open. Click on Internet Protocol ( TCP/IP ) to highlight it and then click on Properties.
33.. The TCP/IP Properties dialog box will open, in IP address section, select Obtain an IP address automatically.
44.. Click on Gateway, and in Gateway section, erase all previous settings. 55.. click on DNS configuration, make sure DNS is disabled. 66.. click OK to close all networking dialog boxes.
OvisLink ATX OvisLink ATX
44OvisLink ARM104-v2
Setting Up TCP IP (Win2000/XP)
55.. In Properties dialog box, select Obtain an IP address automatically and Obtain DNS Server address automatically, then chick OK for all the subsequent dialog boxes to save the settings.
11.. Click on the Start button and select Settings then click on Control Panel.
22.. Click on Network Connections to open the network control panel.
33.. Right Click on the Local Area Connection to highlight it and select Properties.
44.. The local Area Connection Properties dialog box will open. Click on Internet Protocol (TCP/IP) to highlight it and then click on Properties.
English
55OvisLink ARM104-v2 English
Web Configuration
11.. Open your web browser and type in routers IP address (default: 192.168.1.254) in the Address field.
22.. When asked for login and password.Press enter admin for login,
ovislink for password. 33.. Once you press enter, you should see the following page: !! Automatic Setup: Set up the router base on country and ISP
selection. !! Manual Setup: Set up the router by entering the ADSL setting
manually. Use this if your country is not listed or if the automatic setup doesnt work
!! Basic Setup: To configure the basic option of the router !! Advance Setup: To configure the advance option of the router
66OvisLink ARM104-v2 English
Web Configuration
Automatic Setup
1. Click on Automatic Setup in the main menu.
2. Select your country. 3. Select your ISP (Some countries do not need this option). 4. If your ISP provides you username and password, please fill in
this dialog. Otherwise skip this step.
5. If your ISP give you IP address and Gateway, please select static IP
6. After entering the information. Press Save Settings to complete installation.
7. The router will reboot. Please wait for 30 seconds for the router to connect with Internet.
77OvisLink ARM104-v2
Informacin Bsica
Configuracin predeterminada !! Direccin IP: 192.168.1.254 !! Mscara de subred: 255.255.255.0 !! Login: admin !! Password: ovislink !! DHCP: 192.168.1.x
Aviso Importante !! Si tu enrutador no esta funcionando adecuadamente, prueba
reiniciar el equipo a la configuracin original de fbrica
presionando el botn de reset.
!! En el menu de configuracin Rpida, los parmetros VPI, VCI y Encapsulamiento se muestran para su visualizacin. No
necesariamente debe realizar cambios.
!! Recuerde Guardar Cambios despus de cada modificacin.
Diagrama de Conexiones
Espaol
Lnea ADSL (Cable Telefnico)
Puertos LAN (Cable Par Trenzado)
RESET Botn Encendido/ Apagado
Conector de Alimentacin
88OvisLink ARM104-v2
Panel Frontal
11.. Conecte el cable de la lnea ADSL al puerto WAN del router y conecte la fuente de alimentacin. Ahora,
22.. ya puede conectar los cables que vienen de los ordenadores a cualquiera de los 4 puertos LAN. Finalmente, coloque el botn
ON/OFF en posicin ON para recibir alimentacin.
33.. reinicie su ordenador para redefinir la direccin IP.
Espaol
Indicador LED Color Estado Significado
Power Rojo ENCENDIDO APAGADO
Encendido Apagado
LINK Verde ENCENDIDO Puerto LAN conectado RxD Verde PARPADEANDO Puerto WAN con
Actividad ADSL Verde ENCENDIDO
PARPADEANDO
Conexin ADSL establecida. No hay conexin ADSL
RDY Verde PARPADEANDO Puerto LAN con actividad
99OvisLink ARM104-v2
11.. Pulse el botn derecho del ratn sobre Entorno de Red y seleccione la opcin Propiedades.
Configuracin TCP/IP (Win98/ME)
22.. Se abrir la ventana de Dilogo de Red. Pulse en Acceso telefnico a( TCP/IP ) y a continuacin en Propiedades.
33.. Se abrir la ventana de Propiedades de TCP/IP, pulse en la seccin Direccin IP, y seleccione Obtener una direccin IP automticamente
Espaol
OvisLink ATX OvisLink ATX
1100OvisLink ARM104-v2
Configuracin TCP/IP (Win2000/XP)
55.. En Propiedades, seleccione Obtener una direccin IP automticamente y Obtener la direccin del servidor DNS automticamente, despus pulse OK en todos los cuadros de dilogo para guardar los parmetros cambiados.
11.. Pulse en el botn Inicio y seleccione Configuracin dentro del Panel de Control.
22.. Pulse en Conexiones de red para abrir el panel de control de Conexiones de red.
33.. Pulse el botn derecho sobre Conexin de rea local y seleccione Propiedades.
44.. La ventana de Propiedades de Conexin de rea local se abrir. Pinche sobre Protocolo Internet (TCP/IP) y despus seleccione Propiedades.
Espaol
1111OvisLink ARM104-v2
Configuracin Web
11.. Ejecute el navegador. Teclee en la direccin IP del router, la siguiente direccin: 192.168.1.254.
22.. Cuando se solicite el login presione Enter e introduzca admin
como nombre de usuario y ovislink como clave. 33.. Una vez que presione Enter, Usted debera ver la pgina siguiente:
!! Configuracin Automtica/Automatically Setup: Esta opcin
configurar el ASDL en funcin del pas y del ISP seleccionado. !! Configuracin Manual/Manually Setup: Configurar el router
manualmente. sela si su pas no aparece en la lista o si la opcin automtica no funciona.
!! Configuracin bsica: Para configurar la opcin bsica del enrutador
!! Configuracin avanzada: Para configurar la opcin avanzada del enrutador
Espaol
1122OvisLink ARM104-v2
Configuracin Web
Configuracin automtica del ADSL
1. Selecccione su pas. 2. Selecccione su ISP (algunos pases no necesitan esta opcin). 3. Si su ISP le ha provisto de un usuario y contrasea, por favor
introdzcalos. De no ser as obvie este paso.
4. Si tu Proveedor de Servicio Internet ISP provee direccin IP y Gateway, seleccione static IP
5. Luego de introducir la informacin, presione Save Settings para guardar la configuracin.
6. El enrutador se reiniciar automticamente. Esperar 30 segundos para permitir que el enrutador establezca comunicacin con Internet.
Espaol
1133OvisLink ARM104-v2
Informaes Bsicas
Configuraes Padro
!! IP Address: 192.168.1.254 !! Subnet Mask: 255.255.255.0 !! Login: admin !! Password: ovislink !! DHCP Range: 192.168.1.x
Aviso Importante !! Se o seu Router no est a funcionar, experimente pressionar o
boto de reset para restaurar as definies de fbrica
!! No Quick Setup a informao relativa VPI, VCI e Encapsulation so mostradas para sua informao. No so
necessrias quaisquer alteraes.
!! Lembre-se de Pressionar Save depois de mudar as configuraes.
Painel Trazeiro
Portugus
Para Linha ADSL (Cabo de
Telefone Cable) Portas LAN
(Cabo Ethernet)
RESET
Adaptador do Conector
On/OFF
1144OvisLink ARM104-v2
Painel Frontal LED
11.. Conecte a Linha ADSL no Porta WAN e conecte o alimentador de energia tambm.
22.. Ento conecte os cabos de rede dos computadores em uma das 4 portas LAN. Finalmente, vire a chave On/OFF para liga-lo.
33.. Para usurios Win98/ME, reinicie seu computador para ganhar um novo numero IP
Portugus
Indicador do LED Cor Status Significado
Power Vermelho Ligado Desligado
Energia ligada Energia Desligada
LINK Verde Ligado Porta LAN conectada
RxD Verde Piscante Porta WAN activada
ADSL Verde Ligado Piscante
A conexo ADSL esta estabilizada Sem Conexo ADSL
RDY Verde Piscante Porta Lan Activada
1155OvisLink ARM104-v2
11.. Clique com o boto direito sobre no My Network Places para seleciona-lo e avance no menu e selecione Properties na rea de trabalho
Configurando o TCP IP (Win98/ME)
22.. A janela de Rede ser aberta. Clique sobre o internet protocol ( TCP/IP ) para seleciona-lo e clique no boto Properties.
33.. A janela de propriedades do TCP/IP ser aberta, nesta seo selecione Obtain an IP address automatically.
44.. Clique sobre a aba Gateway, e dentro da seo Gateway, apague todas as configuraes anteriores.
55.. clique sobre a aba DNS configuration, e tenha certeza que o DNS est desabilitado.
Portugus
OvisLink ATX OvisLink ATX
1166OvisLink ARM104-v2
Configurao TCP IP (Win2000/XP)
55.. Na janela de propriedades do Internet Protocol selecione a opo Obtain an IP address automatically e Obtain DNS Server address automatically, e ento pressione OK para todos os subseqentes caixa de dilogo para salvar as configuraes
11.. Clique sobre o boto Start e selecione Settings e ento selecione Control Panel.
22.. Clique sobre Network Connections para abrir o painel de rede.
33.. Clique com o boto direito em Local Area Connection e selecione Properties.
44.. A janela local Area Connection Properties ser aberta e em seguida selecione Internet Protocol (TCP/IP) e clique sobre o boto Properties.
Portugus
1177OvisLink ARM104-v2
Configurao atravs do Navegador
11.. Abra o seu navegador. Digite o IP do seu roteador 192.168.1.254 no campo de endereos do seu navegador.
22.. Quando solicitado o Login e Password utilize admin para login e
ovislink para password. 33.. Quando pressionar enter dever ver a seguinte pgina:
!! Automatically Setup: Ir configurar o Modem Adsl com base no
pas e o ISP selecionado. !! Manually Setup: Configura ADSL entrando os ajuste da ADSL
manualmente. Use isto se o seu pas no est listado na lista de pases ou se o automtico setup no funciona.
!! Configurao Bsica: Para configurar os parmetros bsicos do router
!! Configurao Avanada: Para configurar os parmetros avanados do Router
Portugus
1188OvisLink ARM104-v2
Configurao atravs do Navegador
Setup ADSL Modem Automatically
1. Selecione o seu pas. 2. Selecione o seu ISP (Alguns pases no precisam desta opo). 3. Se o seu ISP, digite o seu username e password. Caso
contrrio pule este passo.
4. Se o seu ISP fornece-lhe o seu endereamento de IP e a Gateway, por favor seleccione static IP
5. O Router vai reiniciar. Por favor aguarde cerca de 30 segundos para o router conectar Internet.
Portugus
/ColorImageDict > /JPEG2000ColorACSImageDict > /JPEG2000ColorImageDict > /AntiAliasGrayImages false /DownsampleGrayImages true /GrayImageDownsampleType /Bicubic /GrayImageResolution 300 /GrayImageDepth -1 /GrayImageDownsampleThreshold 1.50000 /EncodeGrayImages true /GrayImageFilter /DCTEncode /AutoFilterGrayImages true /GrayImageAutoFilterStrategy /JPEG /GrayACSImageDict > /GrayImageDict > /JPEG2000GrayACSImageDict > /JPEG2000GrayImageDict > /AntiAliasMonoImages false /DownsampleMonoImages true /MonoImageDownsampleType /Bicubic /MonoImageResolution 1200 /MonoImageDepth -1 /MonoImageDownsampleThreshold 1.50000 /EncodeMonoImages true /MonoImageFilter /CCITTFaxEncode /MonoImageDict > /AllowPSXObjects false /PDFX1aCheck false /PDFX3Check false /PDFXCompliantPDFOnly false /PDFXNoTrimBoxError true /PDFXTrimBoxToMediaBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ] /PDFXSetBleedBoxToMediaBox true /PDFXBleedBoxToTrimBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ] /PDFXOutputIntentProfile () /PDFXOutputCondition () /PDFXRegistryName (http://www.color.org) /PDFXTrapped /Unknown
/Description >>> setdistillerparams> setpagedevice