7/30/2019 Manual of flow transmitter schenck
1/2
Weighing and Feeding Electronics
INTECONTPLUS, INTECONTOpus andINTECONTSatus
Weighing and Feeding Electronics
INTECONTPLUS, INTECONTOpus andINTECONTSatus
Product TrainingProduct Training
Well-trained personnel arethe basis for your success.We won't
leave you on yourown!
Well-trained personnel arethe basis for your success.We won't
leave you on yourown!
Get to know our electronics
systems better - the
Get to know our electronics
systems better - theINTECONT
Satus or the
INTECONT
PLUS.INTECONT
Satus or the
INTECONT
PLUS.Both devices stand for highlyaccurate measuring and
re-cording of bulk material flows.Whether with the
Both devices stand for highlyaccurate measuring and re-cording
of bulk material flows.Whether with theINTECONT
Satus, a modern,
basic control system for belt-weighers, the
INTECONT
Satus, a modern,basic control system for belt-weighers,
theINTECONT
Opus for legal-for-
trade beltweighers or theINTECONT
Plus as the com-
pact solution for continuousscales and feeding systems -they all
perform highly accuratemeasuring.
INTECONT
Opus for legal-for-trade beltweighers or theINTECONT
Plus as the com-
pact solution for continuousscales and feeding systems -they all
perform highly accuratemeasuring.
OverviewOverview
Design of the INTECONT
systems FunctionsDesign of the INTECONT
systems FunctionsToTo
record precisely,report,continuously meter,
and batch exactlymaterial flows with feed devicesintegrated into
the system controlOperation
ParameterizationCalibration
Diagnostics and ServiceEasyServe
Service functionsData Transmission
Fieldbus connection
And, of course, the answers to all of
your questions.
Target Group
Specific training for employees in thefollowing areas: operating
personnel,service and maintenance personnel,commissioning and
design engineers.
Duration
1 Day (08:30 04:30 p.m.)
Individual Requests:We are always willing to adapt thecontents
to meet your specific re-quirements. Develop a training pro-gram
together with us that meetsthose requirements. We would behappy to
focus on application topicssuch as i.e. electronics systems in:
Belt / weighfeeders
Loss-in-weight feeders
Mass-flow feed devices Flow measuring equipment
SchenckProcessGmbH
Pallaswiesenstr.
100
64293Darmstadt,Germany
T
+4961511531-3
111
61511531-3
111
F
+4961511531-1
336
F
+4961511531-1
336
BV-D2329GB
7/30/2019 Manual of flow transmitter schenck
2/2
Aim
Expand your know-how. Schenck Process GmbH has
years of experience in the field of customer training.
Our training programs give you a broad basic knowl-
edge of the areas of industrial weighing, feeding and
automation technology. The training takes place in a
learning-oriented atmosphere. This atmosphere isencouraged not
only by the practically-oriented teach-
ing aids, but also by the small group size.
You will get to know the basic principles of theINTECONT
Satus basic control system, the
INTECONT
Opus, the version for legal-for-tradebeltweighers or the
continuous scales and feedsystem INTECONT
PLUS
You will discuss the operating principles of theindividual
componentsYou will recognize the effects of incorrect settings
You will localize the causes of malfunctionsYou will rectify
malfunctions
Constant switching between presentations and exer-
cises ensure that your staff make the most of the
training course. Our instructors are specialists with
years of experience in weighing, metering and auto-
mation technology and convey what they know in a
lively, interesting way.
How you will benefit
Only some of the advantages for you at a glance:You will
increase process reliability by avoidingincorrect operation
You will save costs, as you and your employeeswill be able to
rectify malfunctions yourselves
You will refresh your expertise by exchangingideas with
specialists
You will secure your investment by being able togive your
devices optimum care during operation
You will avoid costs through efficient employeetraining,
thorough development of expertise
and the rapid training of new employees
General Notes
Training Venue
Right in the hub of it! Thanks to its central location,Darmstadt
is perfect for training courses.Our recently opened TrainingCenter
is easy to reachfrom anywhere in the world via Frankfurt airport.
Butwe dont have to run the training course at one of our
global sites, e.g. in England. Naturally, we can alsohold a
course at your place of business. Our flexibilityallows you to make
the decision.In our new TrainingCenter you will find a
practicaltraining in a professional environment.
RegistrationPlease register online
atwww.schenckprocess.com.section service/customer training.
You will receive prompt confirmation of your registra-tion.
FeesThe daily rate is given on the overview page.Please
understand that the training course will onlytake place if a
sufficient number of participants regis-ters (min 3 people).
AccommodationOn request, we would happily make a hotel
reserva-tion for you.
Further questions?
Should you have any questions, do not hesitate tocontact us:T:
+49 6151-1531-3111,F: +49
[email protected]
Customer-Specific Training Program
We would be glad to make you a quotation.
Give us a call!
B
V-D2329GB
0947Allinformationisgive
nwithoutobligation.Allspecificationsaresubjecttochange.bySchenckProcess
GmbH,2009
http://www.schenckprocess.com/mailto:[email protected]:[email protected]:[email protected]://www.schenckprocess.com/
