Manual Bissell 86T3

7/24/2019 Manual Bissell 86T3

1/16

BIG

GREE

ND

EE

P

CLEANI

NGM

ACHIN

E

USERG

UI

DE

86T3 SERIES


2/16

IMPORTANT SAFETY INSTRUCTIONS

www.BISSELL.com

800.237.7691

2

WARNINGTO REDUCE THE RISK OF FIRE,

ELECTRIC SHOCK, OR INJURY:

Connect to a properly groundedoutlet only. See groundinginstructions. Do not modify the3-prong grounded plug.

Do not leave appliance when it isplugged in. Unplug from outlet whennot in use and before servicing.

Use indoors only. Do not allow to be used as a toy.

Close attention is necessary whenused by or near children.

Do not use for any purpose otherthan described in this UsersGuide. Use only manufacturersrecommended attachments.

Do not use with damaged cordor plug. If appliance is notworking as it should, or has been

dropped, damaged, left outdoors,or dropped into water, have itrepaired at an authorizedservice center.

Always install float before any wetpick-up operation.

Do not pull or carry by cord, usecord as a handle, close a door oncord, or pull cord around sharpedges or corners. Do not runappliance over cord. Keep cordaway from heated surfaces.

Do not unplug by pulling oncord. To unplug, grasp the plug,not the cord.

Do not handle plug or appliancewith wet hands.

Do not put any object into open-ings. Do not use with any openingblocked; keep openings free ofdust, lint, hair, and anything thatmay reduce air flow.

Keep hair, loose clothing, fingers,and all parts of body away fromopenings and moving parts.

Turn off all controls before plug-ging or unplugging appliance.

Use extra care when cleaningon stairs.

Do not use to pick up flammableor combustible materials (lighterfluid, gasoline, kerosene, etc.)or use in areas where they maybe present.

Do not use appliance in anenclosed space filled with vaporsgiven off by oil base paint, paintthinner, some moth proofingsubstances, flammable dust,or other explosive or toxic vapors.

Do not use to pick up toxicmaterial (chlorine bleach,ammonia, drain cleaner, etc.).

Do not pick up anything thatis burning or smoking, such ascigarettes, matches, or hot ashes.

Use only BISSELL cleaningproducts intended for usewith this appliance to preventinternal component damage.See the Cleaning Fluid sectionof this guide.

Unplug before connectingTurboBrush Tool.

Do not immerse. Use only onsurfaces moistened by thecleaning process.

Keep appliance on a level surface.

Do not use without intake screenfilter in place.

READ ALL INSTRUCTIONS BEFORE USING YOUR DEEP CLEANER.

When using an electrical appliance, basic precautions should be observed, including the following:

This model is for household use only.

SAVE THESE INSTRUCTIONSFOR FUTURE USE

WARNINGImproper connection of the equipment-grounding conductor canresult in a risk of electrical shock. Check with a qualified electricianor service person if you arent sure if the outlet is properly grounded.DO NOT MODIFY THE PLUG. If it will not fit the outlet, have a properoutlet installed by a qualified electrician. This appliance is designed

for use on a nominal 120-volt circuit, and has a grounding attachmentplug that looks like the plug in the illustration. Make certain that theappliance is connected to an outlet having the same configuration asthe plug. No plug adapter should be used with this appliance.

GROUNDING INSTRUCTIONSThis appliance must be connected to a grounded wiring system. If itshould malfunction or break down, grounding provides a safe pathof least resistance for electrical current, reducing the risk of electricalshock. The cord for thisappliance has an equipment-groundingconductor and a grounding plug. It mustonly be plugged into an outlet that isproperly installed and grounded inaccordance with all local codes and ordinances.

Grounded

Outlets

Grounding Pin


3/16

www.BISSELL.com

800.237.7691

3

Thk fr buyng BISSELL dep clr

Were glad you purchased a BISSELL

deep cleaner. Everything we know

about floor care went into the designand construction of this complete,

high-tech home cleaning system.

Your BISSELL deep cleaner is well

made, and we back it with a limited

five-year warranty. We also stand

behind it with a knowledgeable,

dedicated Consumer Care

department, so, should you ever

have a problem, youll receive fast,

considerate assistance.

My great-grandfather invented

the floor sweeper in 1876. Today,

BISSELL is a global leader in the

design, manufacture, and service

of high quality homecare products

like your BISSELL deep cleaner.

Thanks again, from all of us

at BISSELL.

Mark J. Bissell

Chairman & CEO

Safety Instructions. . . . . . . . . . . 2

Product View. . . . . . . . . . . . . . . .4

Assembly . . . . . . . . . . . . . . . . . . . 5

Operations . . . . . . . . . . . . . . . .5-9

Maintenance & Care . . . . . . 10-11

Troubleshooting . . . . . . . . . . . . 12

Replacement Parts . . . . . . . . . 13

Accessories . . . . . . . . . . . . . . . . 14

Warranty . . . . . . . . . . . . . . . . . . . 15

Consumer Care. . . . . . . . . . . . . 15

Product Registration. . . . . . . . 16

Deep cleaning stairs and high-traffic areas on a regularbasis helps prolong carpet life.

Check upholstery stuffing before cleaning. Coloredstuffing may bleed through the fabric when itbecomes wet.

Before turning off the machine, suction up cleanwater to thoroughly rinse out the interior of the flexhose. Then, lift the cleaning tool and point it upwardsto drain any remaining water into the dirty water/collection tank.

Tp


4/16

1 Spray Trigger2 Power Cord3 Adjustable Handle

4 Hose Latch5 Tank Carry Handle6 Flow Indicator7 Solution Hose Connection8 Dirty Water Tank

9 Front Carry Handle10 Clean Water Tank11 Spray Trigger

12 Power Switch13 Upper Handle Release14 Back Carry Handle15 Recline Handle

Prduc Vw

www.BISSELL.com

800.237.7691

4

11

12

13

14

15

1

2

3

54 6

7

10

8

9


5/16

www.BISSELL.com

800.237.7691

5

Your BISSELL deep cleaning machine comeswith no assembly required!

Asmbly

Opr

WARNINGDo not plug in your deep cleaner untilyou are familiar with all instructions andoperating procedures.

Cleaning fluidKeep plenty of genuine BISSELL 2X formula onhand so you can clean and protect whenever itfits your schedule. Always use genuine BISSELLdeep cleaning formulas. Non-BISSELLcleaning solutions may harm the machine andwill void the warranty.

ProfessionalDeep Cleaning

Pet Stain & OdorDeep Clean& Protect

Allergen Cleansing Spring Breeze Tough Stain Pretreat

Best for

Out Cleans

all otherformulas

Removes tough pet

stains and containspatented odorremoval technology

Deep cleans carpets

and protects fromfuture stains withScotchgard Protector

Helps remove pet &pollen allergens

Powerful

cleaning with arefreshing scent

Pretreat to

penetrateand loosentough stains

2X Concentrated X X X X X

Scotchgard Protection X X X

*ONLY BISSELL Protects from future stains with Scotchgard Protector

Scotchgard is a trademark of 3M.

WARNINGTo reduce the risk of fire and electric shockdue to internal component damage, useonly BISSELL cleaning fluids intended for usewith the deep cleaner.

Before you clean1.Move furniture to another area if cleaning theentire room (optional).

2.Vacuum area with a dry vacuum cleanerthoroughly before deep cleaning.

3.Plan your cleaning route to leave an exitpath. It is best to begin cleaning in the cornerfarthest from your exit.

4.Pretreating (optional) is recommended toimprove cleaning effectiveness for heavily soiledcarpet in high traffic areas such as entrywaysand hallways.

a.Spray the BISSELL Tough StainPre-Cleaner formula onto high traffic areas,soiled areas or stains.

b.Allow to penetrate for at least threeminutes.

c.Clean as normal using your BISSELL deepcleaning machine, following the instructionson page 6.

ATTENTIONSome Berber carpets have a tendency to fuzz

with wear. Repeated strokes in the same areawith an ordinary vacuum or deep cleanermay aggravate this condition. Please see StainRemoval instructions on page 11.


6/16

Opr

www.BISSELL.com

800.237.7691

6

Carpet cleaning1. Remove dirty water tank by pulling dirtywater tank handle to upright position and lift upto remove dirty water tank.

2. Lift clean water tank from the base of machine.

a. Unscrew cap on top of the clean water tank.Fill tank to FILLline with clean, hot tap water.Do not boil or microwave water.

b. Measure BISSELL formula using capon tank. Fill cap to line twice for each fulltank of water. Always use genuine BISSELLformulas to maximize cleaning and for thesafety of your machine.

c.Screw cap back onto clean water tank andplace tank onto base of the machine.

3. Replace dirty water tank securely on top ofthe clean water tank and push handle back tolock into place.

4. Plug into a proper outlet and turn the powerswitch to the ON (I) position.

5. Recline handle by pushing down on thegreen lever on the back of the machine whilepulling back on handle.

6. Cleaning strokes. While pressing the trigger,make one slow forward wet pass and another

back. Let the formula and DirtLifter PowerBrushdo the work for you.

NOTE: Your machine is equipped with a circuitbreaker that will automatically shut off the brushif a large or loose object is caught in the brushroll. If that happens, be sure to unplug yourmachine, remove the foreign object and thenplug machine in to reset the circuit breaker.

7. Cleaning strokes. Release the trigger andmake one slow forward and backward pass overthe same area to remove any residual dirty water

and aid in drying. Repeat cleaning passes untilsolution being pulled up appears clean. Continuepasses without pressing the trigger until youcant see any more water being pulled up.

8. Remove the dirty water tank by pulling thehandle to the upright position and lift up. Carrythe tank like a bucket to a utility sink or outsidewhere you will dispose of the dirty water.

9. Unlatch the top of the tank from the bottomby pushing the handle all the way forward andlifting the top off. Pour dirty water into the sink.

NOTE: You may notice hair and debris depositson the carpet or in the tank that were loosenedby the cleaning action (especially with newercarpets that have never been deep cleanedbefore). This debris should be picked up andthrown away.

10. Fill the clean water tank with clean hot tapwater and follow instructions 2 - 9 tocontinue cleaning.

CAUTIONDo not overwet. Take care not to run overloose objects or edges of area rugs. Stallingbrush may result in premature belt failure.

3.

1.

2c.

3. 5.

1.

2. 2a.

9.8.

9.

WARNINGTo reduce the risk of injury, be extra careful when cleaningstairs. Make sure machine is secure and level.


7/16

www.BISSELL.com

800.237.7691

7

OprCleaning with attachmentsYour deep cleaning machine may have comewith a hose and at least one attachment forcleaning stairs, upholstery and more.

1. Important!If using to clean upholstery, checkupholstery tags.

a. Check manufacturers tag before cleaning.W or WS on the tag means you can useyour deep cleaning machine. If the tag iscoded with an X or an S (with a diago-nal stripe through it) or says Dry CleanOnly, do not proceed with any deep clean-ing machine. Do not use on velvet or silk. Ifmanufacturers tag is missing or not coded,check with your furniture dealer.

b. Check for colorfastness in aninconspicuous place.

c. If possible, check upholstery stuffing.Colored stuffing may bleed through fabricwhen wet.

d. Plan activities to allow upholstery timeto dry.

e. Vacuum thoroughly to pick up loosedebris and pet hair. Use a vacuum with abrush attachment and a crevice tool to clean

in fabric folds.

2. Fill the clean water tank. Lift clean water tankfrom the base of machine.

a. Unscrew cap on top of the clean watertank. Fill tank to FILLline with clean, hottap water. Do not boil or microwave water.

b. Measure BISSELL formula using cap ontank. Fill cap to line twice for each full tankof water. Always use genuine BISSELLformulas to maximize cleaning and for the

safety of your machine. c.Screw cap back onto clean water tank and

place tank onto base of the machine.

3. Attach Hose

a. Connect solution hose to the hoseconnection point on unit, next to flowindicator. Insert hose and turn clockwiseuntil locked into place.

b. Open hose latch on the front of the unitand insert hose into place. Turn clockwise

until locked into place.4. Attach the cleaning tool to the end of thehose.

5. Clean by pressing the red trigger to spraysolution onto the area to be cleaned. Slowlymove the tool back and forth over the soiledsurface. Release the trigger to suction soiledwater. Continue to clean in the area, work-ing in small sections, until no more dirt can beremoved. Caution: Do Not Overwet

Adsdfddghgbvh

cvbbjjknhnbjjkvh

gcgh

hjjjhffhlkllgh

Manufacturers tag

2c.

2. 2a.

3a.

3b. 3b.

5.4.


8/16

Opr

www.BISSELL.com

800.237.7691

8

6. Remove and rinse tool in clean running water.Let dry completely.

7. Empty dirty and clean water tanks and rinsefollowing instructions on page 9 Machine care

instructions 1 - 4.

Stain RemovalDo Not Delay!Attending to an accident soonafter it occurs ensures the most optimal clean.Leaving it for an extended period of time maycause it to set and become permanent

1. Blot up liquids with an absorbent cloth orpaper towels. White materials are recommended

because certain dyes may bleed and make thestain worse.

2. Gently scrape up any semi-solids with aspoon or spatula. Do not use a knife or otherutensil with sharp edges because it coulddamage the carpet or upholstery.

3. If the area has dried, remove theremaining semi-solids and residue witha sweeper or vacuum.

4. Be sure to test any spot removal formulas inan inconspicuous area first. This is important

as some dyes and materials could be damagedor discolored by cleaning solvents. If such achange should occur, try a different solution orcall a professional.

5. If cleaning on Berber carpeting, gently runyour machine over a hidden area. If no fuzzingoccurs, continue cleaning in soiled area.

6. Using the BISSELL Tough Stain PreCleaner,spray evenly over soiled area. DO NOTOVERWET.Wait 3-5 minutes. Gently workthe solution by blotting area with a clean,damp, color safe cloth.

7. Clean using the unit or the hose withattachment.


9/16

www.BISSELL.com

800.237.7691

9

OprMachine storageOnce your cleaning is complete, make sure boththe dirty and clean water tanks are emptied,rinsed out and dried before the next use.

NOTE: Store cleaner in a protected, dry area.Since this product uses water, it must not bestored where there is a danger of freezing.Freezing will damage internal components andvoid the warranty.

Machine careFor best results, a few simple steps can assureyour machine is well maintained after yourcleaning is complete

1. Turn power OFF (0). Unplug the machine andwrap the power cord.

2. After emptying the clean and dirty watertanks, rinse them out with running hot tap water.

3. The top half of the dirty water tank can also berinsed clean through the nozzle area.

4. To clean attachments, remove from hose andrinse in clean, running water and let dry. Cleanthe hose by removing it from the machine andlet running tap water run through both ends.

5. After carpet is dry, vacuum again to removehair and fuzz.


10/16

Belt removal and replacement1. Turn off the machine and unplug it from theoutlet.

2. Remove the dirty and clean water tanks fromthe base of the machine.

3. While standing behind the unit, lay the uniton its side (cord side up)

4. Looking at the bottom of unit, find the backcenter of the brush carriage where the carriagelatch is located. It is between the brush assem-bly and the front wheels.

5. Pull brush carriage towards you withone hand until it stops, then pinch the carriagelatch with other hand while pulling the carriage

towards you. The carriage should swing out toaccess belt cover.

6. Remove three screws from cover. Lift andremove to access brush carriage.

7. Turn the belt inward towards the large pulleywhile lifting out.

8. Place new belt over small pulley first andthen slip the belt over the large pulley.

NOTE: Test the brush roll to make sure it spinsfreely before moving to the next step.

9. Replace the brush carriage and screws.

10. Push brush carriage back into placemaking sure the carriage latch locks back intoplace.

Mntnc & CrWARNING

To reduce the risk of electric shock, turn power switchoff and disconnect plug from electrical outlet before

performing maintenance or troubleshooting checks.

4.

6B.6A.

8.

10.

3.

5.

7.

9.

www.BISSELL.com

800.237.7691

10


11/16

Mntnc & CrBrush removal and replacement1. Turn OFF (0) the machine and unplug fromthe outlet.

2. Remove the dirty and clean water tanks fromthe base of the machine.

3. While standing behind the unit, lay the uniton its side (cord side down).

4. Looking at the bottom of the unit, find thecenter of the brush carriage where the carriagelatch is located. It is between the brushassembly and wheels.

5. Pull the brush carriage towards you withone hand until it stops. Pinch the carriage latchwith the other hand while pulling the carriage

towards you. The carriage should swing out toaccess brush end cover.

6. Remove three screws from endcap. Pullendcap off to release brush roll.

7. With cover removed, the brush comesout easily by tilting the loose end out of thecarriage.

8. To replace the brush roll back into the unit,place the large open end of the brush onto thecarriage and tilt opposite end back into place.

9. With the brush sitting relatively straight upand down by itself, place endcap back on topand replace three screws. The brush will needto be held and centered to the cover whileplacing it back on.

10. Spin the brush by hand to make sure itturns freely with some minor resistance fromthe motor. Push brush carriage back into placewith a light pull against the lock.

4. 5.

6A.

7.

9. 10.

6B.

8.

3.

WARNINGTo reduce the risk of electric shock, turn power switchoff and disconnect plug from electrical outlet before

performing maintenance or troubleshooting checks.

www.BISSELL.com

800.237.7691

11


12/16

Trblhong WARNINGTo reduce the risk of electric shock, turn power switchoff and disconnect plug from electrical outlet beforeperforming maintenance or troubleshooting checks.

Problem Possible causes Remedies

Reducedspray orno spray

Water tank may be empty Fill clean tank with hot tap water

Tank may not be seated com-pletely

Turn power OFF (0). Remove andreseat tank

Pump may have lost prime. Turn power OFF (0) and thenback ON (I). Wait one minute, thendepress trigger

Debris filter on base is clogged Turn power OFF (0). Use hand toremove debris

DirtLifterPowerBrushdoes not turn

The belt is off or broken Turn power OFF (0) and unplug unitfrom outlet. Follow instructions onpage 10

The unit is in the upright position Brushes only rotate when unit isreclined using the recline handle

Circuit breaker on machine mayhave tripped

Turn the machine OFF (0) andunplug from outlet. Check to see ifforeign object is caught in brush roll.Remove object. Plug machine in toreset circuit breaker

Cleaner

not pickingup solution

Tanks may not be seated properly Turn the machine OFF (0). Pick upboth the clean and dirty water tanksand reseat them so they fit snugglyon the unit

Clean water tank is empty Check fluid levels in clean water tankand refill if necessary

Dirty water tank has picked up themaximum amount

Empty dirty water tank.

Red float door in the tank mayhave closed as a result of bump-ing an object or moving machineback and forth too quickly

Turn the machine OFF (0), allow-ing red float door to release into theopen position. Turn the unit back ON(I) to continue cleaning. Be sure yourforward and backward strokes arecompleted at a slower pace

Front nozzle of machine isclogged

Turn the machine OFF (0). Use fingersto remove any debris from this area.

Upper body filter is clogged Turn the machine OFF (0). Use fingersto remove any debris from this area.

Other maintenance or service not included in the manual shouldbe performed by an authorized service representative.

Thank you for selecting a BISSELL product.

For any questions or concerns, BISSELL is happy tobe of service. Contact us directly at 1-800-237-7691.

Please donot returnthis productto the store.

www.BISSELL.com

800.237.7691

12


13/16

Rplcmn PrThese items are available for your BISSELL BigGreen deep cleaner.Call 1-800-237-7691 or visit www.BISSELL.com

PART # PART NAME PART # PART NAME

203-7443 Hose assembly 203-7451 Float

203-7452 Dirty tank bottom 203-7449 Dirty tank lid with handle

203-7454 Clean tank assembly 203-7455 Clean tank cap assembly

203-7457 Nozzle assembly 203-7458 Brush

203-7459 Brush endcap 203-7460 Belt

*Not all parts are included with every model.

www.BISSELL.com

800.237.7691

13


14/16

AccrThese items are available for your BISSELL BigGreen deep cleaner.Call 1-800-237-7691 or visit www.BISSELL.com

www.BISSELL.com

800.237.7691

PART # PART NAME PART # PART NAME

203-6651 3 Tough Stain Tool 203-6652 Powered TurboBrushHand Tool

203-6653 4 Upholstery Tool 203-6654 6" Stair Tool

203-6655 Spraying Crevice Tool 203-0116 2-in-1 Crevice Tool

203-7240 Oxy Gen2 Tool 62E5-2 DeepClean + Protect formulawith ScotchgardTM Protector60oz

99K5-2 2X Pet Stain and Odor Formulawith Scotchgard Protection60 oz.

89Q5-2 2X Allergen Cleansing Formula60 oz.

78H6-3 2X Professional Deep CleaningFormula with ScotchgardProtection 48 oz.

26V2 2X Spring Breeze Formula60oz.

4001 Tough Stain PreCleaner 22 oz.

14

*Not all parts are included with every model.


15/16

This warranty gives you specific legal rights, and you may alsohave other rights which may vary from state to state. If you needadditional instruction regarding this warranty or have questionsregarding what it may cover, please contact BISSELL Consumer

Care by E-mail, telephone, or regular mail as described below.

Limited Five-Year WarrantySubject to the *EXCEPTIONS AND EXCLUSIONS identified below, uponreceipt of the product BISSELL will repair or replace (with new orremanufactured components or products), at BISSELLs option, freeof charge from the date of purchase by the original purchaser, forfive years any defective or malfunctioning part.

See information below on "If your BISSELL product shouldrequire service".

This warranty applies to product used for personal, and not commercialor rental service. This warranty does not apply to fans or routinemaintenance components such as filters, belts, or brushes. Damage ormalfunction caused by negligence, abuse, neglect, unauthorized repair,or any other use not in accordance with the User's Guide is not covered.

BISSELL IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGESOF ANY NATURE ASSOCIATED WITH THE USE OF THIS PRODUCT. BISSELLSLIABILITY WILL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT.

Some states do not allow the exclusion or limitationof incidental or consequential damages, so the

above limitation or exclusion may not apply to you.

*EXCEPTIONS AND EXCLUSIONS FROMTHE TERMS OF THE LIMITED WARRANTY

THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY OTHERWARRANTIES EITHER ORAL OR WRITTEN. ANY IMPLIED WARRANTIESWHICH MAY ARISE BY OPERATION OF LAW, INCLUDING THE IMPLIEDWARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULARPURPOSE, ARE LIMITED TO THE FIVE YEAR DURATION FROM THEDATE OF PURCHASE AS DESCRIBED ABOVE.

Some states do not allow limitations on how long an impliedwarranty last so the above limitation may not apply to you.

NOTE: Please keep your original salesreceipt. It provides proof of date of purchasein the event of a warranty claim.

If your BISSELL product shouldrequire service:Contact BISSELL Consumer Care to locate a BISSELL Authorized ServiceCenter in your area.

If you need information about repairs or replacement parts, or if youhave questions about your warranty, contact BISSELL Consumer Care.

Website or E-mail:www.BISSELL.com

Or Call:BISSELL Consumer Care1-800-237-7691Monday Friday 8am - 10pm ETSaturday 9am - 8pm ETSunday 10am - 7pm ET

Or Write:BISSELL Homecare, Inc.PO Box 3606Grand Rapids, MI 49501ATTN: Consumer Care

Wrry Srvc

www.BISSELL.com

800.237.7691

15


16/16

2013 BISSELL Homecare, IncGrand Rapids, MichiganAll rights reserved. Printed in ChinaPart Number 160-3692 Rev 12/13Visit our website at: www.BISSELL.com

For information about repairs or replacement parts, or questions about your warranty:

Registering is quick, easy and offers you benefits over the lifetime of your product.Youll receive:

Visit www.BISSELL.com/registration now!

Visit the BISSELL website: www.BISSELL.comWhen contacting BISSELL, have model number of cleaner available.

Please record your Model Number: ___________________

Please record your Purchase Date: ___________________

NOTE: Please keep your original sales receipt. It provides proof of purchasedate in the event of a warranty claim. See Warranty on page 19 for details.

Call:BISSELL Consumer Care1-800-237-7691

Monday - Friday 8 am - 10 pm ETSaturday 9 am - 8 pm ETSunday 10am - 7pm ET

Write:BISSELL Homecare, Inc.PO Box 3606Grand Rapids MI 49501ATTN: Consumer Care

BISSELL Cumr Cr

Rgitr yr prduc da!

BISSELL Rewards Points

Automatically earn points fordiscounts and free shipping onfuture purchases.

Faster ServiceSupplying your information nowsaves you time should you need tocontact us with questions regardingyour product.

Product Support Reminders

and AlertsWell contact you with anyimportant product maintenancereminders and alerts.

Special PromotionsOptional: Register your emailto receive notice of offers,contests, cleaning tips and more!

W c w r frm y!Rate this product and let us (and millionsof your closest friends) know what you think!

www.BISSELL.com

Documents

Manual Bissell 86T3