Upload
cmenusi
View
326
Download
4
Tags:
Embed Size (px)
DESCRIPTION
Manual Ativar ILO - Ml110-G7
Citation preview
Ativar ILO – ML110 G7
Caso não tenha, conectar cabo porta 1 de rede e ligar ao Switch (VLAN Corporativa)
Na tela de boot, pressionar F9
Se deu OK, aparecerá no canto inferior F9 Pressed
Na BIOS, ir até PCI DEVICE Enable/Disable e Enter
Verificar se todos os dispositivos estão Enable, senão selecionar o dispositivo, Enter e então selecionar Enabled
Fazer isso para as 2 placas de rede
Voltar ao menu com ESC e selecionar Advanced Options
Selecionar Advanced System ROM Options
Selecionar Power-On Logo
Mudar para Disabled
Dar ESC até aparecer a tela acima, então pressionar F10
Após o reboot, quando aparecer iLO 3 Advanced press [F8] to configure, pressionar F8
Ir em Network -> DNS/DHCP e Enter
DHCP Enable = OFF (para mudar use barra de espaço)
DNS Name = ILO-FW
F10
Depois ir em NIC and TCP/IP
Network Interface Adpater = Shared Network Port (mudar com espaço)
IP Address = 10.22.0.147
Subnet Mask = 255.255.252.0
Gateway IP Address = 10.22.3.254
F10
User -> Add
User Name = suporte
Login name = suporte
Password = suporte
Verify password = suporte
F10
File -> Exit
Enter
Enter
Aguardar até o Reinicio com servidor