MantaMESH®

Wire Decking

Safety

Compliance

Performance

Competitive

Delta Shelving Systems – Experienced manufacturer since 1984.

- Delta Shelving Systems GmbH located in Thuringia.

- Started production August 2014

- Brand new fully automated manufacturing facility

- MADE IN GERMANY

- We are product and market specialists

Product List:

- MantaMESH®

Wire Decking – Today’s Focus

- MonkeyMESH®

Backing System

Who is Delta Shelving Systems?

Deliver Certainty

What can Delta Shelving Systems do for you?

24/7 Customer Interface

• Product Configurator• Quote or order under 2

minutes• Select delivery terms• Monitor order status

Digital Processing

• Integrated Data Transfer• Automated Design Process• Dynamic Production Planning• Machine Interface

Intelligent Manufacturing

• Connected “Smart” Manufacturing

• Fully Automated facility• Make to order production• Real time monitoring

Deliver Certainty

Performance

UDL independent from the

racking beams

200% safety factor.

Maximum deflection 1/165 of

the rack depth.

What can Delta Shelving Systems do for you?

Safety

SafeEDGE® no sharp edges

Supporting channel without

sharp edges

No dust or clutter collection in

supporting channel.

Compliance

Tested to ANSI mh26.2-2007.

70% open Area, Exceeds

NFPA13&FMGlobal.

Lightweight high performing ‘hemmed’

channel with end forms

Different end forms to suit rack beams

Inverted ‘hemmed’ channel profile –

superior performance without sharp edges

Prevents build up of dust and dirt

What is MantaMESH®

?Product features: Inverted Hemmed Channel

50x100mm mesh aperture for

standard applications

Customisable 25x100mm aperture

for boxes and small parts

Superior box support and sliding

Greater than 70% open area

What is MantaMESH®

?Product features: Choice of Mesh aperture

SafeEDGE®

on front and rear

waterfall - eliminates risk of injury

Provides a smooth edge on both

waterfalls

Flush welded without jagged

edges

What is MantaMESH®

?Product features: SafeEDGE®

The supporting channel has no sharp edges.

The MantaMESH®

channel has its open side faced down for maximum hygiene.

The Hemmed channel is welded at every intersection of the mesh, in compliance with ANSI mh 26.2-2007

Wat is MantaMESH®?Product features: Hemmed Channel

Unique Item Identifier with product ID

Load rating UDL

Permanently fixed to all MantaMESH products

Quality and compliance marking

What is MantaMESH®

?Product features: Orange TAG™

Large standard range of

sizes and UDL’s

Counfigurable for unique

applications and load

requirements

MantaMESH can be

configured for stand offs and

double deep racking

What is MantaMESH®

?Product features: Standard or Configurable

What is MantaMESH®

?Configurable to suit all applications.

Standard for the “Design, testing and utilization of welded wire rack decking”

The globally recognised Wire Decking standard – RMI

All MantaMESH products are designed and tested to comply with ANSI MH26.2-2007

Extensive in-house testing and design competence

Independently certified for compliance

What is MantaMESH®

?Product features: Compliant to ANSI MH26.2 – 2007

What is MantaMESH®?competitive decks against ANSI MH26.2 – 2007

Company Rated (kg)

Load (165mm) kg

Load Failure kg

UDL (by ANSI) Column 2 or Column 3/2

Deviation from ANSI standard

Load Test Result

Weld Test Value

Weld Test Result

Test 1 – Delta Deck 750 814 1930 814 9% passed 30 passed

Test 2 - Sweden 1000 1075 1447 723.5 -28% failed 19 passed

Test 3 - Spain 800 506.8 1191 506.8 -37% failed 19 passed

Test 4 - USA 1000 616 1632 616 -38% failed 30 passed

Why is MantaMESH®

gaining acceptance? Setting the standard for fire safety

ESFR increasingly used in

place of ‘in rack’ sprinklers

FM Global specifications

require greater than 70%

open area shelving

Wire decking is a solution

for a compliant ESFR

sprinkler system

Why is MantaMESH®

gaining acceptance? FM Global ESFR Fire Protection Test

Manufactured in Germany,

Safe Edge at both sides,

No dirt or dust due to Inverted chanel,

No sharp edges, (Safe Edge + Hemmed profile)

High load capacity without the influence of the rack beams,

Maximum deflection 1/165 of the rack depth

Safety factor 2, on collapse,

More than 70% open area.

What is important to your customer?

What is out there?

What is out there?

What is not suitable for mesh decks!

Delta Shelving as engineer.

Design around the storage medium.

Questions

What Next?