Mandatory Disclosure - SBS STCsbsstc.ac.in/PDFs/MandatoryNew2017.pdfMandatory Disclosure (For the year 2017- 18) Submitted by SHAHEED BHAGAT SINGH STATE TECHNICAL CAMPUS 2 AICTE File

1

Mandatory

Disclosure

(For the year 2017-18)

Submitted by

SHAHEED BHAGAT SINGH

STATE TECHNICAL CAMPUS

2

AICTE File No. : F.No. North-West/1-2814091849/2016/EOA

Date & Period of Last Approval : 25-Apr-2016

Name of the Institution : Shaheed Bhagat Singh State Technical Campus, Ferozepur

Address of the Institution : Moga Road, NH-95, Ferozepur –Punjab -152004

City & Pin Code : Ferozepur -152004

State / UT : Punjab

Longitude & Latitude : Longitude Degree - 74 Latitude Degree-30

Longitude Minutes – 54 Latitude Minutes – 54

Longitude Seconds-4 Latitude Seconds - 51

Phone Number with STD Code : 1632242138,500838

Fax Number with STD Code : 242138

Office hours at the Institution : 9:00 am to 5:00 pm

Academic Hours at the Institution : 8:00 am to 5:00 pm

E-Mail : [email protected]

Website : www.sbsstc.ac.in

Nearest Railway Station (Dist in Km) : Ferozepur Cantt (5KM)

Nearest Airport (Dist in Km) : Amritsar, 125 km (approx.)

Type of Institution : Government

Category (1) of the Institution : Non-minority

Category (2) of the Institution : Co-ed

Name of the Organization : Shaheed Bhagat Singh State Technical Campus,

running the Institution Ferozepur

Type of Organization : Society

Address of the organization : Shaheed Bhagat Singh State Technical Campus, Moga

mailto:[email protected]

http://www.sbsstc.ac.in/

3

Registered with : Registrar of Firms & Societies Punjab, Mohali Road,

Ferozepur

Registration Date : 03/11/1995

Website of the Organization : www.sbsstc.ac.in

Name of the Affiliating : Maharaja Ranjit Singh Punjab Technical University, Bathinda

University /Board : University

Address : Dabwali Road, Bathinda -151001

Website : www.mrsptu.ac.in

www.cdc.mrsptu.ac.in

Latest affiliation period : 2017-18

Name of Principal / Director : Dr. Tejinder Singh Sidhu

Exact Designation : Director

Phone Number with STD Code : 01632 – 242138, 500838

8288012001

FAX number with STD code : 01632-242138

Email : [email protected]

Highest Degree : Ph.D

Field of specialization : Mechanical Engineering

http://www.sbsstc.ac.in/

http://www.mrsptu.ac.in/

http://www.cdc.mrsptu.ac.in/


4

Governing Board Members:

1. Sh.Akhil Malhotra

CMD, Shivam Group, Ludhiana, Punjab

Chairman

2. Principal Secretary to the Government of Punjab

Department of Finance, Civil Secretariat, Chandigarh

Ex-Officio

Member


Department of Technical Education, Mini Secretariat, Sector-

9, Chandigarh

Ex-Officio

Member


Department of Science & Technology, Mini Secretariat,

Sector-9, Chandigarh

Ex-Officio

Member

5. Director

Department of Technical Education & Industrial Training,

Punjab, Sector-36A, Chandigarh

Ex-Officio

Member

6. Sh. Harpreet Singh

Member Legislative Asembly, Malout, Punjab

Member

7. Nominee

Ministry of Human Resource Development, 6 Raisana Road,

New Delhi-110001

Member

8. Nominee

All India Council for Technical Education, New Delhi

Member

9. Nominee

Institution of Engineers (India)

Member

10. Dr. Buta Singh

Dean Acadmics, IKG PTU Jalandhar, Punjab

Member

11. Professor B.D. Nathani

Ex-Principal, RSD College, Ferozepur City

Member

12. Sh. Kamal Sharma

Ferozepur, Punjab

Member

13. Vice Chancellor/Nominee

MRS PTU Bathinda

Member

14. Mr. Sameer Mittal

Director Finance, Bhagwati Lacto Veg Exports Pvt. Ltd.,

Ferozepur Cantt

Member

15. Sh. Narinder Singh

Director, Ishat Spinner Pvt. Ltd. Ludhiana

Member

16. Dr. (Mrs.) J kakaria (UGC Nominee)

Director Public Schools,DAV College Management

Committee, New Delhi-110055

Member

17. Chairman Ex-Officio

5

Punjab State Board of Technical Education & Industrial

Training, Sector-36-A, Chandigarh

Member

18. Mr. Sukhwant Singh

Associate Professor, SBS State Technical Campus, Ferozepur

Member

19. Dr. Rakesh Kumar

Associate Professor, SBS State Technical Campus, Ferozepur

Member

20. Dr. T. S. Sidhu

Director, SBS State Technical Campus, Ferozepur

Member-

Secretary

Frequency of meeting & date last of meting: The BOG meeting is held twice a year.

6

Academic Advisory Body

7

Frequency of meetings & Date of Last Meeting: Advisory Council meeting is held once a year and last meeting was held on 14/110/2016.

Organisational Chart Annexure -I

Student feedback mechanism on institutional Government /Faculty performance:

The College has stude t s o sultati e o ittee, a d the feed ack regarding the Institutional Governance is taken through this forum. The feedback

Performa given below is filled-up by the students for the concerned teachers of the semester at the end of every semester.

8

Annexure- I

Shaheed Bhagat Singh State Technical Campus, Ferozepur Student’s Feedback Form

DEPARTMENT OF Session

Group Date / /20

Sem. Branch

Note:- Please give grades for each item of Assessment to the respective teachers in the appropriate column to give your response

Excellent=5 Very good=4 good=3 Fair=2 Poor=1

(A) Teaching Attributes

(B) General Attributes:

Note: students are required to assist us to provide proper feedback on faculty, as perceived by the student. By no means, it is to be seen as an evaluation

of teacher but to be as a process of ascertaining on parameters that could improve and enhance the effectiveness of teaching of a student for the benefit

of our valued students.

9

Sr.

No.

Attribute Teacher Teacher Teacher Teacher Teacher

Subject (Th) (Pr) (Th) (Pr) (Th) (Pr) (Th) (Pr) (Th) (Pr)

i. Knowledge of the subject ii Way of teaching/method of Expression iii. Oral communication in Class iv. Interaction with students in tutorial class v. Experimental skills in Lab class vi. Use of Teaching Aids vii. Punctuality in Class viii. Regularity in Evaluation & Return of Home

Assignments

ix. Regularity in Evaluation & Return of Class

tests

x. Assessment of Students TOTAL

Sr.

No.

Attribute Teacher Teacher Teacher Teacher Teacher

Subject (Th) (Pr) (Th) (Pr) (Th) (Pr) (Th) (Pr) (Th) (Pr)

i. Control in Class ii Ability of motivating students iii. Integrity iv. Ability to take initiative v. Sense of humour

TOTAL

Feedback discussed with concerned faculty on date Observations of the HOD

Observations of the HOD Observations of the Principal

10

11

Grievance Redressal mechanism for faculty, Staff and students:

Grievances of faculty and staff are addressed as per the mechanism provided in the College Bye-

Laws whereas the Student grievances are settled through a counseling Cell, headed by Chief

Cou selo / Chief Wa de / Wa de s. The feed a k f o the stude ts is gathe ed the HOD s of the concerned department on his personal basis. Thereafter, the HOD prepares a cumulative

information about the concerned faculty / staff member of the department and the said faculty /

staff member is informed about the feedback to improve upon his/her teaching methodology and

interaction with the students. The requirements/ problems of the faculty/staff members are looked

i to a d the solutio s a e o ked out the Di e to o e i g eeti g ith all the HOD s.

Women Grievance Cell exists in our College. The constitution of the committee is as follows:

S.No. Name Category Profession

1. Mrs. Sonika Jindal Chairperson Assistant professor, C.S.E

2. Dr. Satvir Singh Member Professor, Deptt of E.C.E

3. Dr. Rajni Member Professor, Deptt of E.C.E

4. Mrs. Vaishali Goyal Member Associate Professor, Deptt of M.E

5. Mr. Tejpal verma Member Librarian

6. Mrs. Indu Bala Member Assistant Librarian

7. Mrs. Amanpreet Kaur Member Junior Assistant

12

10.11 Name of the department Chemical Engineering

Course B. Tech. (Chemical Engineering)

Level UG

1st

Year of approval by the Council 1996

2016 2015 2014

Year-wise Sanctioned Intake 30 30 30

Year-wise Actual Admissions 9 11

(LEET)

20

(LEET)

Cut Off marks- General Quota 50% in 10+2 50% in 10+2 50% in 10+2

% Students Passed with Distinction 6/34 = 7.7% 9/32 =28.1% 7/36 = 19.4%

% Students Passed with First Class 18/34=53% 24/32=75% 29/36=81%

Students Placed 10 5 7

Average Pay Package , Rs/Year 3 lacs 2.25 lacs 2.75 lacs

Students opted for Higher Studies 03 07 06

Accreditation Status of the Course NBA Accredited

Doctoral Courses No

Foreign Collaborations, if any NIL NIL NIL

Professional Society Memberships IICHE NIL NIL

Professional Activities FMRA-

2016

FMRA-2015 “Recent trends in

PC&TEA conducted

with CIPET Amritsar

Consultancy Activities NIL NIL NIL

Grants Fetched NIL NIL NIL

Departmental Achievements 21/08/2015: Inspirational Movie on Bhopal gas tragedy

03/09/2015: Inspirational movie on APJ Abdul Kalam

(biography)

04/09/2015: Teacher’s Day celebration 07/09/2015: Technical Presentation

30/09/2015: Chem-E-Quiz

08/10/2015: Group Discussion

09/10/2015: Final Round of GD

07/11/2015- 08/11/2015: Techno-cultural fest-

CHEMOSPARK 2K15


11/08/2016: Final Group Discussion

17/08/2016: Extempore

23/02/2016: Welcome of 1st

year 06/09/2016: Extempore

08/09/2016: Extempore

13/09/2016: Mock Interview

15/09/2016: Final Mock Interview


22/09/2016: Inspirational Movie

27/09/2016: Lecture on Personality Development

04/10/2016: Aptitude Test

13



13/10/2016: Oral Presentation

18/10/2016: Expert Lecture

25-27/10/2016: ChESS Annual Event

04/11/2016: Industrial Trip

08/11/2016: Expert Lecture

09/11/2016: Aptitude Test

15/11/2016: Debate

16/11/2016: Final Debate

Distinguished Alumni

( For M.Tech )

01 (at ISM

Dhanbad)

01

(at NIT Jaipur)

03 (IIP Dehradun,

M.Tech. PU &

M.Tech. PU

10.11

(b)

Name of the Department Computer Sci. &Engg.

Course B.Tech, M.Tech

Level UG & PG

1st year of Approval by the Council 1996 for UG , 2010 for PG


B.Tech 120 120 120

M.Tech 18 18 18

Year-wise Actual Admissions 2016 2015 2014

B.Tech 152 150 152

M.Tech 6 17 18

Cut off Marks-General Quota 2016 2015 2014

B.Tech Max. 88.20%

Min.49.9%

Max.94%

Min.55.20%

Max.91.20 %

Min.49.00%

M.Tech Max.80.11%

Min. 69.20 %

Max.82.12% Min.

58.32%

Max.77%

Min. 65.36%

% Students Passed with Distinction 21.91% 22.29% 35.58%

% Students Passed with First Class 82.19% 89% 70.75%

Students Placed (No.) 59 60 75

Average Pay Package, Rs/Year 2.25 Lac 2.25 Lac 2.25 Lac

Students Opted for Higher Studies (No.) 6 3 7

Accrediation Status of the Course Accrediated

Doctoral Courses YES

14

Foreign Collaborations, if any Nil

Professional Society Memberships ISTE, IEEE, CSI, IAENG

Professional Activities YES

Consultancy Activities Nil

Grants Fetched YES

Departmental Achievements COMPUWAVE society organized expert Lecture

o Cu e t Te h olog A a e ess o -08-

2013 by Navjot Singh, Technical Director,

Weavebytes, Chandigarh.

COMPUWAVE society organized expert Lecture

o Mo ile Appli atio De elop e t o -

08-2013 by Manu Mehra, Director, V-Serv

Solutions, Ludhiana.

COMPUWAVE society organized expert Lecture

o Soft a e Safet o -08-2013 by Pankaj

Vyas, Asso. Professor, CSE, BITS, Pilani.

COMPUWAVE society organized a workshop on

JAVA Programming on 17th

Sept 2013.

Department has organized 2 Days workshop on

" Mobile Application Development using

Android" from 18th

-19th

March 2014 in

collaboration with IIT-Roorkee.

Department had organized a course on "Cloud

Computing" from 28th

October to 1st

November

2014 by NITTR, Chandigarh at

SBSSTC,Ferozepur.

Department has organized lecture on "Trending

Technologies" on 28th

August 2015

An expert lecture on Java was organized by the

COMPOWAVE society on 5th

November, 2015.

Seminar by HCL on "Big Data" was hosted by

the Department on 24th

September, 2015

Department has organizedexpert lecture on

"Python" on 16th

March, 2016.

15

COMPUWAVE Society organized a function on

Technical activities

Department has organizedexpert lecture on

"Website Development by using PHP and

wordpress Technologies by All Innovative

Technologies", Mohali on 29th

March, 2016.

In collaboration with other Departments,

Department had successfully organized 2 Day

National Conference on Computing,

Communication and Electrical Systems on 21st

-

22nd

November 2016

COMPUWAVE Society had successfully

conducted formal interaction programme to

enhance the communication skills for students

on 5th

Sept. 2016

COMPUWAVE Society had successfully

celebrated Engineer's Day Celebration cum

Project Development competition 14th

Sept.

2016

Distinguished Alumni DivjotArora CISCO, Dubai

SaurabhSareen CISCO, Australia

Kulbir Singh Nijjer SUN, USA

Vijay Kumar Raju, Microsoft

Jasleenkaur HR, Accenture

PuneetSingla Branch Head, AMDOCS,Gurgaon

Manu Mehra, V-Serve Tech. Industrial Area

Ludhiana Manish Goyal

10.11 ( c) Name of the department Mechanical Engineering

Course B Tech

Level UG UG UG

1st

Year of approval by the Council 2016 2015 2014



Cut Off marks- General Quota 44% 50% 51%

16

% Students Passed with Distinction 16 9 22

% Students Passed with First Class 110 151 135

Students Placed 18 15 11

Average Pay Package , Rs/Year 2.25 LPA 2.0 LPA 2.0 LPA


Accreditation Status of the Course Accredited

Doctoral Courses Yes

Foreign Collaborations, if any MoU with NHL University of Applied

Sciences, Netherlands for students

Exchange Programme

Professional Society Memberships ISTE

Professional Activities Industrial tours, Expert Lectures by

SFME

Distinguished Alumni Mr. Kulwant Singh, IAS

e.)

10.11

(d)

Name of the department School of Architecture

Course B.Arch

Level UG

1st

Year of approval by the Council

Year 2016 2015 2014

Year-wise Sanctioned Intake 30 40 N.A.

Year-wise Actual Admissions 9 15 N.A.

Cut Off marks- General Quota 81 80 N.A.

Accreditation Status of the Course Accredited/Provisionally Accredited/Not

Accredited /Not Eligible Yet

17

10.12

(e)

Name of the department Electrical Engineering

Course B.Tech

Level UG/PG 1

st Year of approval by the Council

Year-wise Sanctioned Intake (2016) (2015) (2014)

76 76 76

Year-wise Actual Admissions (2016) (2015) (2014)

16 56 71

Cut Off marks- General Quota (2016) (2015) (2014)

46.4% 51.2% 50.22%

% Students Passed with Distinction (2016) (2015) (2014)

10.81% 3.9% 4.05%

% Students Passed with First Class (2016) (2015) (2014)

83.7% 75.6% 90.5%

Students Placed (2016) (2015) (2014)

17 25 29

Average Pay Package , Rs/Year 1.8 Lakh -3.33

Lakh

1.8 Lakh - 3.33 Lakh

1.8 Lakh - 3.33 Lakh




Professional Society Memberships YES

Professional Activities ISTE

Grants Fetched YES ( Unnat Bahrat Abhiyan 4.5 Lac 2016-17 Year

by Dr. Kultardeep Singh)

Departmental Achievements FDP ON PLC

FDP ON

MATLAB

Work Shop on

Microcontroller

and PLC

Demand of Experts from

the students

02/09/13 TO

06/09/13

11/11/13 TO

15/11/13

02/04/14 TO

04/04/14

12/08/13

IATC

SIEMENS PKL

Math works

ADVANCE

TECH

CHD

Ms Rupika from

Nestle Moga

Dr Y.S Brar

18

Power System

Analysis

Time and

Frequency

Domain

Analysis

1/10/15

8/10/15

GNDEC

Ludhiana

Dr Simrajit

Ghosh

Thapar

university

Distinguished Alumni 1. Pritish Kumar (SKF India ltd. Gurgaon)

2. Navish kumar (Microsoft India Private ltd.)

10.12 Name of Department Electronics and Communication Engineering

Course B.Tech. & M.Tech.

Level UG & PG

1st

year of approval by the Council

UG 2002 (40) F.No. 765-65-205 (E)/ET/95 dated 20.06.02, Intake increased

to 60 seats in 2003, 90 in 2006

PG 2010 North West/1-6607571/2010/EOA dated 23-08-10

Year wise sanctioned intake (2016) (2015) (2014)

B.Tech. 90+4(TFW)

+18 (LEET)

90+4(TFW)+

18 (LEET)

90+4(TFW)+

18 (LEET)

M.Tech. 18 18 18

Year wise actual admissions (2016) (2015) (2014)

B.Tech. 34 43 46

M.Tech. 02 08 18

Cut off marks- General Quota (2016) (2015) (2014)

B.Tech. 50% 52.4% 50%

M.Tech. 56% 72% 68%

%students passed with Distinction (2016) (2015) (2014)

B.Tech. 1.75 26.79 16.67

M.Tech. 27.78 22.22 23.53

19

%students passed with first class (2016) (2015) (2014)

B.Tech. 65.79 96.43 98.25

M.Tech. 61.11 94.44 100

Student Placed (2016) (2015) (2014)

B.Tech. 10 11 24

M.Tech. 03 03 5

Average pay package, Rs. Year (2016) (2015) (2014)

B.Tech. 2.44 LPA 2.94 LPA 2.48 LPA

M.Tech. 2.8 LPA 1.8 LPA 4.05 LPA

Students opted for Higher studies (2016) (2015) (2014)

B.Tech. 2 7 15

M.Tech. Nil 1 1

Accreditation status of the course Accredited (B.Tech.)

Doctoral Courses -- -- --

Foreign Collaborations, if any -- -- --

(2016) (2015) (2014)

Professional Society Memberships IETE Students Forum

(Institution of

Electronics and

Communication

Engineers)

IETE Students

Forum

(Institution of

Electronics and

Communication

Engineers)

IETE Students Forum

(Institution of Electronics

and Communication

Engineers)

Professional activities 1) Two Day Technical

Workshop on

Ro oti s & ARM was held by experts

from company

APTRON Solutio s P t. Ltd., Noida during 23-24 April,

2016 in department.

Around sixty students

from 2nd

, 3rd

and 4th

Year participated.

Participants were

awarded the

participation

certificates by the the

company.

2)Organized project

1. Technical/Cultu

ral events were

conducted in 2

days

department

level fest 23-24

Feb. 2015

2. Organized

expert lecture

on Automotive

Electronics by

experts from

industry (10-9-

14)

1. PTU Training Fest

organized in institute

on 12-04-2014

2. Expert lecture on

Tele o u i atio e pe t f o

i dust Ra el o Services Pvt. Ltd,

Delhi o Ap il 2014

3. Technical expert

lecture on 29/1/14

4. Expert lecture by

expert from industry

o topi T ai i g & Pla e e t guida e on 13/8/2013

20

H

PO

a

display contest and

workshop on robotics

under techno-opus

(3-4 March, 2016)

Consultancy Activities -- -- --

Grants Fetched -- -- 1.3 lacs in 2013

from AICTE for

FDP Departmental Achievements 1. Organized TEQIP-II sponsored one week National level

FDP o Re e t T e ds i Opti al a d Wi eless o u i atio s ste desig -13 Sep. 2013)

2. Organized TEQIP-II sponsored one week National Level

FDP o Digital I age, Video & Medi al I age P o essi g -27 Sep. 2013)

3. The department got accredited by National Board of

Accrediatation (NBA).

4. The depa t e t te h i al so iet SELCOME o ga ised a Technical Fest in Feb 2014.

5. Dr. Sanjeev Dewra completed his Ph.D in 2014.

6. The department faculty has published 18 papers in SCI

Journals.

7. NCC Cadets Uma and Jyoti along with other branch

adet s o edals i ta le drill.

8. NCC Cadets Kuldeep Kaur, Simranjeet Kaur, Reena

Rani, Priya Devi, Uma and Jyoti, Khushpreet Kaur

attended CATC (Combined Annual Training Camp) for

12 days at Hemkunt Senior Secondary school, Kot-ise-

khan Distt. Moga.

9. Ravi Kumar Ravi, 1322492, a student of 4th

year won

gold medal in 2nd

MRSPTU inter college badmition

tournament held in Sept 2016 at RIMT Mandi

gobindgarh.

10. Dr. Rajni completed her Ph.D in 2016.

11. Two faculty members (Dr. Rajni & Dr. Satvir Singh

Sidhu) got promoted to Professor under direct

recruitment in 2016.

12. One faculty member (Dr. Vishal Sharma) got promoted

to Associate professor under direct recruitment in Distinguished Alumni Gurvinder

Singh Sandha

Jasvinder Singh

Kunwar

Divyanshu

Shivam

Maddaan

Vanshika

Vikas Chopra

Rajat Singh

Ravi Kumar

Shivendra

Singh Chauhan

Shubham

Arora

Amandeep

MANVEND

RA SING

AZAAT

SHATRU

KA

Jashandee

p Sharm

Kashish

monga

21

Gupta Verma

10.12 Name of the department Department of Civil Engineering

Course Level UG

1st

Year of approval by the Council 2011

Year-wise Sanctioned Intake CAY(2016) CAT-1(2015) CAY-2 (2014)

120 120 120


Cut Off marks- General Quota CAY(2016) CAT-1(2015) CAY-2 (2014)

51.47 27.8 22.98

% Students Passed with Distinction CAY(2016) CAT-1(2015) CAY-2 (2014)

NIL NIL NIL

% Students Passed with First Class CAY(2016) CAT-1(2015) CAY-2 (2014)

89 % 97% NIL

Number of Students Placed 02 02 N.A

Average Pay Package , Rs/Year 1.80 Lac 3.25 Lac N.A

Students opted for Higher Studies 03 04 N.A



Professional Society Memberships Yes

Professional Activities Yes

Consultancy Activities Yes

Departmental Achievements Organized National Conference on FMRA

Distinguished Alumni ---

22

10.12 Name of the department DASH DASH DASH

Course

Level UG & PG(PT)

UG & PG(PT)

UG & PG(PT)

1st

Year of approval by the Council

Year-wise Sanctioned Intake CAY(2016) CAT-1(2015) CAY-2 (2014)

Year-wise Actual Admissions CAY(2016) CAT-1(2015) CAY-2 (2014)

Cut Off marks- General Quota CAY(2016) CAT-1(2015) CAY-2 (2014)

% Students Passed with Distinction CAY(2016) CAT-1(2015) CAY-2 (2014)

% Students Passed with First Class CAY(2016) CAT-1(2015) CAY-2 (2014)

Students Placed CAY(2016) CAT-1(2015) CAY-2 (2014)

Average Pay Package , Rs/Year

Students opted for Higher Studies



Doctoral Courses Yes

Foreign Collaborations, if any NIL NIL NIL

Professional Society Memberships NIL NIL NIL

Professional Activities Inter-

disciplinary

National

Conference

on Frontiers

in Material

Research &

Applications,

Oct. 27-28,

2016

National

Conference

on Frontiers

in Material

Research &

Applications

Dec. 24, 2015

International

Conference on

Frontiers in

Materials

Research and

Applications,

Oct 30-31,

2014

Consultancy Activities NIL NIL NIL

Grants Fetched NIL NIL NIL

Departmental Achievements No. of Ph.D.

produced:01

No. of Ph.D.

produced:02

No. of Ph.D.

produced:02

Distinguished Alumni NIL NIL NIL

23

Name of the Department : CA/Mgt.

Course Level UG/PG :

1st

Year of approval by the Council :

MBA/PG

1995

Year Wise Sanctioned Intake : 2016 2015 2014

MBA 60 60 60

Year wise Actual Admissions :

09

10

16

Cut of marks-General quota : 2016 2015 2014

MBA : 66% 70% 62%

% Student Passed with Distinction : ---- ---- 12%

% Students Passed with First Class : ---- ---- 50%

Student Placed

Sr. No. Year No. of Students Placed

1 2016 ------

2 2015 ------

3 2014 02

Average Pay Package Rs./Year : 1.5 lacs

Student opted for higher Studies : 8%

24

Accreditation Status of the Course : In process

Name of the Department : CA/Mgt.


1st


MCA Leet /PG

1995


MCA LEET 60 60 60

Year wise Actual Admissions : 12 21 27


33% 33% 55%

% Student Passed with Distinction : ---- ---- No


Student Placed


1 2016 ------

2 2015 ------

3 2014 03

25




Doctoral Course : yes

Name of the Department :

CA/Mgt.


1st


BCA/UG

1995


BCA 60 60 60

Year wise Actual Admissions :

31

17+2

31


BCA : 41% 70% 38%

% Student Passed with Distinction : ---- ---- 6%


26

Student Placed


1 2016 ------

2 2015 ------

3 2014 ------




27

10.13 Name of Teaching Staff Annexure II

Admission Quota 10.14

1 Admission Quota As defined by

DTE/Punjab

Technical

university

Jalandhar/MRSPTU

Bathinda 85 % of

the seats are

reserved for

students from

Punjab and 15 %

of the seats are

reserved on all

india basis

As defined by

DTE/Punjab

Technical

university

Jalandhar85 % of

the seats are

reserved for

students from

Punjab and 15 %

of the seats are

reserved on all

india basis

As defined by

DTE/Punjab

Technical

university

Jalandhar85 % of

the seats are

reserved for

students from

Punjab and 15 %

of the seats are

reserved on all

india basis

2 Entrance test/admission

criteria

Through AIEEE

conducted by CBSE

at B.Tech level

Through AIEEE

conducted by

CBSE at B.Tech

level

Through AIEEE

conducted by

CBSE at B.Tech

level

3 Cut off/last candidate

admitted

57.11% 58.06% 50.06%

4 Fees in rupees

Btech.MBA.MCA.B.Arch

51750/-

M.Tech 42850/-

51232/-

M Tech:-55510/-

51001/-

M.Tech:-55705/-

As per

college

Prospects

5 Number of fee waivers

offered

10% of intake 10% of intake 10% of intake

6 Admission Calendar As per PTU

Jalandhar &

MRSPTU Bathinda

norms and

instruction

As per PTU

Jalandhar norms

and instruction

As per PTU

Jalandhar norms

and instruction

7 PIO Quota No

28

Computer Centre facilities: Adequate

Library facilities: Adequate

Infrastructural

information: Adequate (Annexure III)

Classroom/Tutorial Room Facilities: Adequate (Annexure III)

Laboratory details: Adequate (Annexure III)

Auditorium / Seminar Halls/Amphi: Adequate (Annexure III)

Cafeteria: Adequate (Annexure III)

Indoor Sports facilities: Adequate (Annexure III)

Outdoor Sports facilities: Adequate (Annexure III)

Gymnasium facilities: Adequate (Annexure III)

Facilities for disabled:

Any other facilities: Reprographic Section, Bank and Post Office, Shopping Complex

10:16 Boys Hostel (04 Boys Hostel)

Name of Boys Hostel :- Ganga Bhawan

Name of Chief Warden:- Dr Lalit Sharma

Name of Warden :- Mr Rakesh Kumar

Name of Manager :- Raghav Ram Pandey

Sr no Post No of worker

1 Guard 03

2 Mali 01

3 Sweeper 03

4 Mess Munim 01

5 Mess worker 16

6 Care Takar 01

Name Detail of Ganga Bhawan

No of Room 89

Room Area 21.88 Sqm.

T.V.Room 54.38 Sqm.

Cooman Room 54.38 Sqm.

Comman Hostel Lawan 81.45 Sqm.

Mess 474.44 Sqm.

Name of Hostel :- Yamuna Bhawan


Name of Warden :- Mr Dharam Pal Kasyap

Name of Manager :- Jangir Singh


1 Guard 03

2 Mali 01

3 Sweeper 02

4 Mess Munim 01

5 Mess worker 08

6 Care Takar 01

29

Name Detail of Yamuna Bhawan

No of Room 40

Room Area 22.29673 Sqm.

Warden Office 21.181884 Sqm.

T.V.Room 64.49608 Sqm.

Manager Office 21.181884 Sqm


Mess 296.64312 Sqm.

Gym 199.63005 Sqm.

Warden Cottage 42.88776 Sqm.

Name of Boys Hostel :- Beas Bhawan


Name of Warden :- Mr Vivek Sood

Name of Manager :- Sukhwinder Singh


1 Guard 03

2 Mali 01

3 Sweeper 03

4 Mess Munim 01

5 Mess worker 14

6 Care Takar 01

Name Detail of Beas Bhawan

No of Room 205

Room Area Single Seater 7.39 Sqm.

Warden Office 15.545 Sqm.

T.V.Room 50.7 Sqm.

Manager Office 15.545 Sqm


Mess 126.97 Sqm.

30

(A) DETAIL OF HOSTEL (Sutluj Bhawan)

S.NO. DETAIL AREA OF ONE

SPECIFICATION

TOTAL AREA

1. Total room SPECIFICATION 21.88sqm 1969.2sqm

2. Common room 01 54.38sqm

3. Tv room 01 54.38sqm

4. Warden Office 01 21.88sqm

5. Manager office 01 21.88sqm

6. Washroom 12 38.49sqm 461.88sqm

7. Block (A+B) 02 198.18sqm 396.36sqm

8. Balcony(A+B) 02 21.88sqm 43.76sqm

9. Store room 02 16.32sqm 32.64sqm

10. Mess 01 474.44sqm

11. Guest Room 01 21.88sqm

(B).MEMBERS

S.NO. DESIGNATION NAME

1. Chief Warden Dr. Lalit Sharma

2. Warden Er. Munish kumar

3. Manager Mr.Kuljit Singh

31

4. Mess Munim Mr. Pappu Rathoure

STAFF MEMBERS OF HOSTEL

5. Security Gaurds 03

6 Sweeper 03

7. Gardener 01

8. Care taker 01

9. Sewer Man 01

PHOTOS OF HOSTEL

Girls Hostel (02 Girl Hostel)

Name of Hostel :- Saraswati Bhawan/Mata Gujri Bhawan


Name of Warden :- Mrs Bindu Bala

Name of Manager :- Narinder Jeet


1 Guard 03

2 Mali 01

3 Sweeper 02

4 Mess Munim 01

5 Mess worker 08

6 Care Takar 02

32

Name Detail of Sarawati Bhawan Detail of Mata Gujri Bhawan

No of Room 80 40

Room Area Singal Seater 59 11.43 Sqm. Nil

Room Area Three Seater 21 19.90 Sqm. 19.60 Sqm.

T.V.Room 39.26 Sqm. 69.21 Sqm.

Cooman Room 39.26 Sqm. 69.21 Sqm.

Mess 111.12 Sqm. 204.62 Sqm.

(c) Medical & other Facilities at Hostels: yes

Academic Sessions Semester Jan- June, August- December)

Examination system, Year/Sem Semester

Period of Declaration of Results Semester-wise

Counseling / Mentoring College has a Training & Placement Cell

Career Counseling with representative from each Engg. Department

Batch Branch/Sem Name of Faculty

2016 BCA 2nd

Sem Mr Davinder Singh

2015 BCA 4th

Sem Ms Amanjeet Kaur

2014 BCA 6th

Sem Ms Manisha

2015 MCA 4th

Sem Ms Ritika

2014 MCA 6th

Sem Ms Sonamdeep Kaur

2016 MBA 2nd

Sem Ms Harmeet Kaur

2015 MBA 4th

Sem Ms. Ritima

Medical Facilities:

SBS state technical campus has its own health center make in an area about 2500 sq. in ft(50”x50”) situated in the center of campus area and in easy reach of all boys and girls hostel for medical facility.

The medical facility in college health centre:

1. B.P. monitoring , pulse checking,temp. measurement respiration

33

2. Blood Gluco Test 3 .

Injection facility

4. Dressing

5. Treatment of emergency first aid medical staff to provide first aid and medical help in emergency

i) Doctor 01(MBBS M.S. Ortho part time)

ii) Pharmacist 01

iii) Staff nurse 02(Male & Female)

6. Ambulance facility

Medical facility with in the college:

i) First aid injection and dressing of wound

ii) Treatment of common ailment i.e. fever, loose-motion, diarhoea, stomach pain.

iii) Blood Gluco test facility

iv) Weight check facility

v) Medicines required in emergency/first aid

Medical facility hereby:-

i) Ortho paedic facility- Tarlok hospital

ii) France Newton Hospital: for indoor admission surgery

Placement Committee

Training and Placement Officer: Dr. Vishal Sharma, Associate Professor, ECE

Departmental Training & Placement I/C's

EW-Mechanical Engineering Dr. Rakesh Sharma

EW- Computer Sc. & Engineering Mr. Pawan Luthra

EW- Electronics & Communication Engg. Mr. Vikram Mutneja

EW-Electrical Engineering Ms. Maninder Kaur EW-Chemical Engineering Mr. Pankaj Kalra

EW-Civil Engineering Mr. Dapinder Deep Singh

Management & IT Wing Mr. Amardeep Chopra

Medical facilities Yes Medical Staff & Dispensary available

Student Insurance No

34

SOCIETY FOR EXTRA CURRICULAR ACTIVITIES (SECA)

S.No During Event Date

1 2014-15 Fresher Party 29/10/14

Shaheedi Diwas 18/03/15

2 2015-16 Annual cultural

function (JASHAN

2K16)

3-4 March 2016

Shaheedi Diwas 18/03/16

3 2016-17 BUZZPLOSION 2K16 10/11/16

Fresher Party 18/10/16

Magazine / Newsletter MANTHAN (Annual) & VERONICA – NEWSLETTER

Manthan: The Annual Magazine

To hone the literary skills of its students Technical Campus provides a platform in the form of its Annual

Magazine namely Manthan, which is published annually and includes literary work of students in three

sections viz. Punjabi, Hindi and English. Various activities involved in publishing of the Magazine are

managed by a team of students under the guidance of a team of faculty members.

Chief Editor Dr. Raminder Pal Singh, Associate Professor, DASH

Editor English Mr. Amit Arora, Associate Professor, ChE

Editor Hindi Ms. Sonika Jindal, Assistant Professor, CSE

Editor Punjabi Mr. Surinder Singh, Tech. Gr-II (W/s)

Editor Design & Printing Mr. Gurpreet Singh, Lab Superintendent, DASH

Veronica: The Bi-Annual Newsletter

Technical Campus brings a half-yearly newsletter by the name Veronica. Its issues are released in the

months of January and July Veronica is published to meet the following objectives

To keep students, faculty and staff of the Technical Campus abreast with their achievements and

happenings in the campus. To provide such students who have a flare for journalism, reporting etc. a platform by extending them an

opportunity to manage all the affairs of the Technical Campus newsletter.

Editor- in- Chief Mrs. Balpreet Kaur, Associate Professor, CHE

Coordinator & Editor English Dr. Kultardeep Singh, Associate Professor, DASH

Editor Hindi Ms. Geetu Bansal, Assistant Professor, DASH

Editor Punjabi Mr. Balwinder Singh, Central Workshop Instructor

Editor Design & Printing Mr. Gurpreet Singh, Lab Superintendent, DASH

35

Technical activities/ Tech Fest

Activities organised by ISTE students Chapter of SBSSTC, Fzr. In the last three years

Year 2015

“Techno Opus’15”organized during 25th ,26

th March 2015 by ISTE student chapter of both Degree and

Diploma Level Institutions( Students Chapter). This National level event included more than 600

participants of B.Tech., M.tech. ,MBA and Diploma levels,150 participants from the reputed Engineering

colleges of this Nothern region participated.

The events organized by ISTE (Student Section) of SBSCET in “techno Opus”are summarized below.

Name of the event Name of the event

Paper Presentation (T ) Robo War

Group Discussion (Vaad-vivad) Tech Expo

Power Point Presentation ( Poster Presentation (P²)

Junk Yard (Garbage Value) Expert Lecture (Disha)

Extempore Speech (Abhivyakti) Drama & Cultural Activities

Techno Vocab Mock Placement (Aptitude)

Cad Cala SSB Interview

Techno Quiz (Quiz Corner) LAN Gamming

This National level event “techno Opus”was designed wisely with a mixture of technical and non technical events not only for the technical development but also for personality development of the

students. So on the evening of 26 March 2015, a grand cultural event was organised which included

group dance, folk dance, theme show, solo singing and dancing, drama, etc. To motivate students to

expose their hidden talents with their splendid and brilliant flair, the first and second position holders are

awarded with cash prizes along with trophies, merit and participation certificate.

Year 2016

In 2016 “Techno Opus’16”organized during 3rd -4

th March 2016 by ISTE student chapter of both Degree

and Diploma Level Institutions( Students Chapter). This National level event included more than 400

participants of B.Tech., M.tech. ,MBA and Diploma levels,50 participants from the reputed Engineering

colleges of this Nothern region participated.

Name of the event Name of the event

Paper Presentation (T ) Robo War

36

Group Discussion (Vaad-vivad) Tech Expo

Power Point Presentation ( Poster Presentation (P²)

Junk Yard (Garbage Value) Expert Lecture (Disha)

Extempore Speech (Abhivyakti) Drama & Cultural Activities

Techno Vocab Mock Placement (Aptitude)

Cad Cala SSB Interview

Techno Quiz (Quiz Corner) LAN Gamming

An ISTE Sponsored National Student Conference on "Emerging Trends in Engineering, Science &

Management" was organised on April 29, 2016. 35 papers of students of various colleges were presented in

the conference. All presented papers were published in an international journal IJSCN as special issue.

The following activities are organized in Schedule July- Nov 2016:

Aug 2016

Teez Fest: Teez Fest organized successfully in the month of Aug,30th

by faculty named Navdeep Kaur/Shiny Sharma.

Group Discussion: Deptt. Of Computer Application and Management successfully organized Group

Discussionin the month of Aug 2016,23rd

with Active participation of Students of different streams by faculty

Navdeep /Sonamdeep where Mandeep kaur from MBA 1st

Sem as Declared winner of this Activity and Danish

and Sajjan Girdhar held 2nd

place equally.

Quiz Competition:Deptt. Of computer Application and Management organized Quiz Competition in the

month of Aug ,2016 .Anupam Shukla from MCA5th got first prize and MBA 2nd

held second position and this

activities successfully organized by faculty Miss Kulwinder Kaur and Mr.Davinder Singh.Sep 2016

Rangoli Competition:Deptt. Of Computer Application and Management Organized Rangoli Competition in

the month of Sep 2016, 7th

.Ajita Narula and Sukhbir held MCA 5th

1st position and Shakshi and Kulbir kaur

got 2nd

position .

Technical Proficiency Test-1 / Mgt. Apptitude Test-1: Deptt. Of Computer Application and Management

Organized Technical Proficiency Test-1 / Mgt. Apptitude Test-1 in the month of Sep 2016,12th

.Anupam Shukla

from BCA 3rd

got first prize and Kirandeep kaur from MCA 5th

got 2nd

position in Technical Proficiency Test -1.

Shakshi from MBA 3rd

got 1st

position and Mandeep Kaur from MBA 1st

got 2nd

Position in Mgt.Apptitude Test-

Workshop: Deptt. Organized Workshop on “Word press” under the Supervision of Mrs.Bindu Bala and

Sonamdeep Kaur for Computer Application Students in Month of Sep.

37

NATIONAL SERVICE SCHEME (NSS Unit-I)

Sr . No Dates Activities

1

2016-17

Yoga day was celebrated. 100 students participated 21-05-16

2 Candle March rally was organized under the theme of

independence -70. (14-8-16)

3 Drawing ,Painting & Slogan competition was organized.100

students participated (23-8-16)

4 Youth Leadership Training camp was held at Manali organized 10

students participated (25-08-16 to 03-9-16).

5 Blood donation camp was organized. 135 units blood donated (30-

9-16).

6 Education survey camp organized .100 students participated (06-

10-16 to 12-10-16).

7 Digital India workshop was held as MRS P.T.U Bathinda 12

students participated (21-10-16).

8 SWEEP-II Programme organized .50 students participated (14-12-

16).

9 2015-2016 Educational tour to Science city Kapurthala was organized. 45

students participated 1-4-15.

10 Drawing ,Painting & Slogan competition was organized .100

students participated 20-08-15.

11 Blood donation camp was organized. 80 volunteer donated

Blood 27-8-15.

12 Seminar Drug de-addiction by Sh. Inderpal Singh (GGSSS) 02-9-15

13 Mega Blood donation camp 17-9-15

14 Blood donation camp was organized. 48 units blood donated 30-9-

16.

15 Cleanliness camp Swachh Bharat Abhyan 16-01-16.

16 Seminar on road safety by Dr.Avtar Singh (Amandeep Hospital )

11-0216.

17 Drug de-addiction & AIDS awareness rally organized . 300

students participated15-03-16.

18 Blood donation camp was organized. 48 volunteer donated

Blood 16-03-16.

19 2014-215 Youth Leadership Training camp held at Manali organized by

P.T.U. 8 students participated 24-6-14 to 3-7-14.

20 7- days Environment cleanliness camp organized by P.T.U.3

students participated 14-8-14 to 20-8-14.

21 Painting & Drawing competition organized 19-8-14 to 20-8-14.

22 Blood donation camp organized.100 units of blood donated by

students 20-8-14.

38

23 Education survey camp organized by P.T.U & ASER. Survey of 35

villages of Ferozepur & Fazilka was done by 80 students 17-9-14 to

21-9-14.

24 200 students participated in cleanliness camp under Swachh

Bharat Abhyan2-10-14.

25 Rashtriya Ecta Divas was celebrated in the campus . 100 students

participated in the seminar31-10-14.

26 7- days Environment cleanliness camp organized by P.T.U. Three

students participated 20-12-14 to 26-12-14.

27 Blood donation camp was organized.50 students donated blood

20-2-15.

28 Shaheed Bhagat Singh Function was organized in the campus. 250

students participated18-3-15.

National Cadet Corps for Girls (Senior Wing)

2016-17

Conduct of BEE Certificate - 14th

feb Swachh Bharat campaign - 21

st jan

New Enrollment of cadets for TRG year (2016-17) CATC-63 ,Sri Hemkunt Sn/Sec School ,Kot Ise Khan(Moga) held from 14june – 23 june Ranking Ceremony of third year cadets – 19

th august

Swachhta Pakhwara (1st

-15th

august) Sensitize Citizen and slum dwellers about safe sanitary practice rally - 10

th august

Thal Sena Camp –I (5th

july-14th

july) Thal Sena Camp –II (24

th july-2

nd july)

Thal Sena Camp –III (5th

aug-14th

aug) 15

th August Celebration – YAD KARO KURBANI

Selection of cadets for RDC – 2017 Inter Group Competition

Award of cadets Welfare Scholarship – 7th

october Best cadet competition 5

th October

Swachh Bharat Campaign – 17 november RCTC 2016

2015-16

New Enrollment of cadets for TRG year (2015-16) Pulse Polio Day celebration 15

th april

Organised yoga in campus – 13th

may CATC – 63 ,Malout (2

nd – 12th

june) Yoga Day – 21

st june

Cancer Awareness Day – 7th

November NCC Day Celebration 2015 (15

th – 23rd

november) Observation of UN days and other Social Service Activities 2015-16

2014-15

Cancer Awareness Day- 7th

November Blood Donation Camp

Sports Activities

MRSPTU ATHLETIC MEETS 2016 BATHINDA

ACHIEVEMENTS OF SBSSTC FEROZEPUR

• 1) AJEET SINGH: Gold Medal 2 Event 1500 mtr. 800 mtr.

• 2) Sukhpreet Kaur: Gold Medal 1 Event 1500 mtr. Discus throw.

• 3) Jaswant Verma: Silver 1 Discus Throw.

• 4) Avneet Kaur: Silver 1 Event 100 Mtr. Race

• 5) Tasveer Kaur Silver medal 1 Event Shotput

6) Tasveer Kaur Bronze medal 1 Event Javelin throw

• 7) Sudhir Singh Silver Medal 1 Event 400 mtr.

• 4x 100 Relay Race Boys: Gold Medal

• Participant : Rohit Kumar, Sudhir Singh, Mayank & Gurpinder Singh

• 4x 100 Relay Race Girls: Silver Medal

• Participant: Avneet Kaur, Ruma, Palvi, Jaspreet Kaur

40

TABLE TENNIS TOURNAMENT OF MRSPTU BATHINDA 2016

• Boys team Gold Medal,

• Volley ball: Boys team Gold medal (RIMT College, Mandi Gobindgarh)

• Lawn Tennis Boys team : Silver Medal SBSSTC, Ferozepur

• Badminton Boys: Gold medal (RIMT College, Mandi Gobindgarh)

• Basket Balls Girls team : Silver medal MRSPTU Bathinda.

•

MRSPTU ATHLETIC MEETS 2014

• 4x 100 Relay Race Boys: Silver Medal, AIET Faridkot

• Participant : Sukhjit Singh, Harwinder Singh, Harmanpreet, Akashdeep Maan

• 100 Mtr Race: Bronze medal

MRSPTU ATHLETIC MEETS 2015

• Basket Ball tournament: Girls team Bronze Medal , Bathinda

• 4 x 100 relay Race: Boys Bronze Medal Tangori.

41

SBSSTC Ferozepur

INTERYEAR TOURNAMENT OF SBSSTC FEROZEPUR (2015) BOYS

• Cricket: Winner 3rd year, runner up 4th year

• Football : Winner 4th year, runner up 3rd year

• Hockey: Winner 3rd Year, Runner up 4th Year

• Lawn tennis : Winner 4th year runner up 3rd year

• Badminton: Winner 2nd year runner up 3rd year

• Volleyball: Winner 3rd year runner up 4th year

• Basket Ball: Winner 3rd year runner up 4th year

• Kabaddi: Winner 4th year runner up 3rd year

• Table Tennis: Winner 2nd year runner up 1st year

• Tug-of-war: Winner 4th year runner up 3rd year

•

GIRLS

• Badminton: Winner 3rd year runner up 4th year

• Volleyball: Winner 4th year runner up 3rd year

• Basket Ball: Winner 2nd year runner up 3rd year

• Tug-of-war: Winner 4th year runner up 3rd year

•

ATHLETICS MEET 2015 BEST

ATHLETES

• Mr. Harwinder Singh (Boys)

• Ms. Avneet Kaur (Girls) ATHLETICS

MEET 2016

BOYS

• Tug-of-war: Winner 3rd year runner up 4th year GIRLS

• Tug-of-war: Winner 4th year runner up 3rd year BEST

ATHLETES

• Mr. Rohit Kumar (Boys)

• Ms. Tasveer Kaur (Girls)

42

INTERYEAR TOURNAMENT OF SBSSTC FEROZEPUR (2014) BOYS

• Cricket: Winner 4th year, runner up 3rd year

• Football : Winner 3rd year, runner up 4th year

• Hockey: Winner 4th Year, Runner up 2nd Year

• Lawn tennis : Winner 3rd year runner up 2nd year


• Volleyball: Winner 3rd year runner up 4th year

• Basket Ball: Winner 4th year runner up 3rd year

• Kabaddi: Winner 4th year runner up 3rd year

• Table Tennis: Winner 3rd year runner up 2nd year

•

GIRLS


• Volleyball: Winner 4th year runner up 3rd year

• Basket Ball: Winner 2nd year runner up 3rd year

ATHLETICS MEET 2014 BOYS

• Tug-of-war: Winner 4th year runner up 3rd year Girls

• Tug-of-war: Winner 4th year runner up 3rd year ATHLETICS

MEET 2014

Best Athletes

• Mr. Mahavir Singh (Boys)

• Ms. Ravinder Kaur (Girls)

43

SBSSTC Ferozepur

Physical Education & Sports Department

Gymnasium (indoor)

Sr. No. Nomenclature Quantity Remarks

1 Treadmills 02

2. Cross Turner 03

3. Cycles 05

4. Multi Gym 02

5. Biceps Machines 02

6. Multipurpose Benches 05

7. Weights (Plates & Dumbles)

complete set

01

8. Yoga Mats 03

9. Skipping ropes 03

10. Mirrors 05

44

SBSSTC Ferozepur

Physical Education & Sports Department

Outdoor Sports Facilities


1 Lawn Tennis Coutts 02

2. Basket Ball Coutts 02

3. Volley Ball 02

4. Kabaddi 02

5. Hand Ball 01

6. Hockey Ground 01

7. Cricket Ground 01

8. Foot Ball Ground 01

9. Kho kho 01

SBSSTC Ferozepur

Physical Education & Sports Department Indoor

Sports Facilities


1 T.T. Tables 02

2. Chess 03

3. Luddo games 03

4. Badminton Coutts 02

45

Industrial Visits / Tours

Industrial visits organized by Dept. Of Chemical Engg. During 2014-15

ChESS organized following Industrial Trip:-

The first visit was the visit to the BATHINDA REFINERY. Mr. Pankaj Kalra and Dr. Rajeev K. Garg

took the initiative of taking the students of third year to the refinery along with the staff including Ms.

Supriya and Ms. Harpreet Kaur.

The second industrial visit was taken to SUKHJIT STARCH,PHAGWARA on 12th

March, 2015. Mr.

Rajiv Arora took the initiative to take the students of second year.

46

The third industrial visit was taken to a biogas plant situated in Mathura on 27th

March , 2015.

Mr.RajivArora took the initiative of taking the students of third year along with the staff including

Ms. Harpeet and Ms. Supriya.

Industrial visits organized by Dept. Of Chemical Engg. During 2015-16.

ChESS organized the following events:

ChESS organized an Industrial Trip of 3rd

Year Students to CIPET Amritsar on 17th

Feb.

2016.

Students of 2nd

year Chemical Engg. were taken for an Industrial Tour of to M.D.Boicoal

Pvt., Barnala on 11th April’ 2016.

47

48

EE

DepartmAcademi

c year

Date

of

Visit

Semeste

r

No.

Of

Studen

Place of visit

2013-2014

12/8/2013 5th 7

4

IATC Siemens Panchkula

20/10/2013 7th 7

4


8/12/2013 5th 7

3


2014-2015 2/10/2015 4th 7

2

Guru Nanak Thermal power plant Bathinda

2015-2016

9/11/2015 5th 7

2

Advance Technology

10/12/2015 7th 7

3

220kv S/S Ablowal Patiala

3/15/2016

4th

7

0

Guru Gobind Singh Super Thermal Power

Plant, Ropar

49

Industrial visits organized by Dept. Of Electronics & Communication Engg.

1. Industrial visit of students to CDAC Mohali for two days (19 and 20 Sep. 2013)

2. Industrial visit of students to CSIO Chandigarh dated 28 sept 2014

3. Industrial visit of students to CSIO, Chandigarh dated 2nd

March 2015.

Industrial visits organized by Dept. Of Civil Engg. Department

Industrial Visits

(Year 2014)

Sr. No. Visiting Site Batch Group On Date

1 Ultra Tech Cement Manufacturing Plant

at Lehragaga, Bathinda

2011 G-1 27/03/2014

2 Ultra Tech Cement Manufacturing Plant

at Lehragaga,Bathinda

2011 G-2 28/03/2014

Industrial Tour of CSE Department

Sr

No

Course Title of

Industrial Visit

Student

Strength

Date of

Visit

Company

name

Batch

1 B-Tech

CSE

Skill Nurturer 63 10-04-2015 Impinge IT

Solutions

Mohali

2012-2016

Industrial Tour Data of ME Department

8/4/2014

VISIT

BIZCON 2014,

LUDHIANA

STUDENTS

1/4/2014

ME

WORKSHOP ON

THE TOPIC

ndustry

academia

collaboration

projects and

Entrepreneurship

Development

and Self

Employment

BY MR RC CHOPRA

FACULTY

50

Alumni activities

SBSCET Alumni Association

An Alumni Association of Ex-Students of SBSCET, Ferozepur has been registered under the name of

SBSCETia s . The a ious o je ti es of the Alu i Asso iatio a e: To arrange a meet of all the Ex-students of the Technical Campus from time to time. To arrange career guidance seminars for the Technical Campus students by inviting Ex-students

of the Technical Campus. To create a link between current students and Ex-students of the Technical Campus so that they

can take valuable guidance regarding their Industrial trainings as well as placements To work for the over upliftment of the Technical Campus by seeking contributions/suggestions

from the Ex-students. To help Technical Campus authorities for arranging convocations of the passed out students

from time to time for awarding Degree/Diploma certificates. To construct Alumni House for the Ex-Students for their accommodation in the Technical

Campus campus.

Coordinator Mr. Anil Bansal, Associate Prof.

President Mr. Sunny Behal, Assistant Professor,CSE

Name of the Information Officer for RTI Mr. Vishal Arora

Designation Asstt. Prof

Phone number with STD Code +91-9417552553

FAX number with STD code 01632-242138

Email [email protected]

[email protected]

51



Annexure – II

Department of ECE

RESUME

1. Name: DrRajni

2. Designation: Professor

3. Department: Electronics and Communication Engg.

4. Date of joining the Institution: 1.09.98

5. Qualification with Class/Grade: UG: IST Class PG: IST ClassPhD: Completed with 8 credits

6. Total Experience in Years: 20.5 years Teaching: 18.5 Y Industry: 2 Y Research: 7.5 Y

7.Paper Published:National:International: 43

8. Paper Published in Conference: National: 12 International:22

9. PhD Guide? Give field & University: Applied for MRSPTU, Bathinda, Field: Metamaterial Antenna design and Wireless Communication

52

RESUME

1. Name: Dr. Satvir Singh Sidhu

2. Designation: Professor

3. Department: ECE

4. Date of joining the Institution:24.07.2006

5. Qualification with Class/Grade: UG: B.TechPG: M.TechPhD: Yes

6. Total Experience in Years: 15+ Teaching: 15+ Industry: 0 Research: 5

7. Paper Published: 20 National: 0 International: 20

8. Paper Published in Conference: 29National: 4 International: 25

9. PhD Guide? Give field & University: 01 (guiding)

53

RESUME

1. Name: DrSanjeevDewra

2. Designation: Assistant Professor (SS)

3. Department: Electronics and Communication Engg.

4. Date of joining the Institution: 01/08/2003

5. Qualification with Class/Grade: UG: B.E. PG: M.E PhD: Completed

6. Total Experience in Years: 23 years Teaching: 23 Industry: Research: 3Y

7.Paper Published: 35 National:International: 35

8. Paper Published in Conference: 09 National: 09 International: 06 9. PhD Guide? Give field & University: 01 ( guiding)

10.Books Published/IPRs/ Patents: 01 (Book Chapter Published)

11.Professional Memberships: ISRD, ISTE, IE

12.Awards: 03

1. Awarded with BEST CITIZENS OF INDIA AWARD by International publishing House, New

Delhi

2.Awarded with RashtriyaGaurav Award by India International Friendship Society, New Delhi

3. Selected the Biography in Marquis who’s whom in the world 2016 (33rd edition) for

54

outstanding achievement award 4. Best Paper Award entitled “Comparison of conventional optical amplifiers at

different transmission distance in an optical communication system” at ACET Amritsar

13.Interaction with Professional Institutions: 03

5. Delivered Expert talk on “Optical Communication Systems” on 20th Jan, 2016 at Chandigarh University, Gharuan

6. Delivered Guest lectures on “Digital Signal Processing” at Guru TegBahadarKhalsa Institute

of Engineering & Technology, Malout

7. Attended Expert talk on “How to write Good Research Paper?” at Thapar University, Patiala

8. Invigilator, Paper setter, PTU Exam evaluator and Head Examiner, M.tech Thesis

evaluator, PhD evaluator

55

RESUME

1. Name Dr. Vishal sharma

2. Designation Associate Professor

3. Department Electronics & Communication

4. Date of Joining the Institution 12/01/2009

5. Qualification with Class/Grade:

UG: Graduate (Electronics) PG: M.Tech (ECE)/First

PhD: July, 2013

6. Total Experience in Years Teaching: 11+ Industry: Nil Research: 8 Years

7. Paper Published (Journals) National: 04 International : 50

8. Paper Published in Conferences National: 06 International : 22

Field: Optical and wireless Communication Systems

9. PhD Guide? Give Field &

University

University: 1. IKGPunjabTechnicalUniversity

2. MRS Punjab Technical University

10. PhD/Projects Guided 04 PhD Thesis (Guiding)

56

RESUME

1. Name: JaswinderKaur

2. Designation: Assistant Professor

3. Department:ECE


5. Qualification with Class/Grade: UG: B.Tech/1st PG:M.Tech/1st PhD: Pursuing

6. Total Experience in Years: Teaching: 11

7. Paper Published: International: 17

8. Paper Published in Conference: National: 01 International: 05

57

RESUME

1. Name: VikramMutneja

2. Designation: Asst. Prof.

3. Department: ECE

4. Date of joining the Institution: 27-07-2005

5. Qualification with Class/Grade: UG: B.Tech. ECE PG:M.Tech. ECE PhD: Pursuing

6. Total Experience in Years: 18 YrsTeaching: 13 YrsIndustry: 5 YrsResearch:

7. Paper Published: National: International: 7

8. Paper Published in Conference: National:4 International: 3

9. PhD Guide? Give field & University:Dr. Satvir Singh, Associate Professor, IKGPTU, Kapurthala

10. Grants:Modernization of Micro controller & embedded systems lab (2007-08)

58

RESUME

1. Name: AMIT GROVER

2. Designation: ASSISTANT PROFESSOR

3. Department:ECE


5. Qualification with Class/Grade: UG: PG: M. TECH/FIRST PhD:

6. Total Experience in Years: Teaching: 15 Industry: Research:

7. Paper Published: National:

International: 30

8. Paper Published in Conference: National: International: 10

9. PhDs/Projects Guided: M. TECH PROJECTS & THESIS GUIDED (15)

10. Books Published/IPRs/Patents: Books Published (03)

59

RESUME

1. Name: ChakshuGoel


3. Department: ECE


5. Qualification with Class/Grade: UG: B.Tech ECE (GNDU, Amritsar, First Division with Honors) PG: M.Tech ECE (PTU, Jalandhar, First Division)

6. Total Experience in Years: Teaching: 14 years Industry: nil

Research:

7. Paper Published( Journal): National: 0 International: 20


9. Professional Memberships: ISTE 60

RESUME

1. Name: Ms. NavdeepKaur


3. Department:Electronics and Communication Engg.


5. Qualification with Class/Grade: UG: B.Tech-E&I (First Division)

PG: M.Tech(Communication Systems)

PhD: Nil

(First Division)

6. Total Experience in Years: Teaching: 8.5Years Industry: Nil Research: Nil

7. Paper Published: National: Nil International: 21


9. Interaction with Professional Institutions: Dean Academics (Affiliation and Approval) Activities interaction with MRSPTU Bathinda, AICTE New Delhi.

61

RESUME

1. Name: GeetaArora


3. Department: ECE

4. Date of joining the Institution:28-07-2005

5. Qualification with Class/Grade: UG: B.TechPG: M.TechPhD: Nil

6. Total Experience in Years: 13 Teaching: 10Industry: 0 Research: 3

7. Paper Published: 0 National: 0

International: 0

8. Paper Published in Conference: 4 National: 4

International: 0

09. Professional Memberships: Yes (2)

62

RESUME

1. Name: Inderjeet Singh Gill


3. Department: ECE

4. Date of joining the Institution:27-07-2005

5. Qualification with Class/Grade: UG: B.E.PG: M.TechPhD: Pursuing

6. Total Experience in Years: 11 Teaching: 11Industry: 0 Research: 0


8. Paper Published in Conference: 6 National: 3 International: 3

63

RESUME

1. Name: VIVEK SOI

2. Designation: ASSISTANT Professor

3. Department:ECE


5. Qualification with Class/Grade: UG: Btech 1st PG: Mtech 1st PhD: Pursuing

6. Total Experience in Years:Teaching: 7 Industry: Research: 4

7. Paper Published: 7National: International: 7

8. Paper Published in Conference: 1 National: 1 International:

64

RESUME

1. Name: Karamjeet Singh

2. Designation: Assist. Prof.

3. Department: ECE

4. Date of joining the Institution: 27- July-2016

5. Qualification with Class/Grade:UG: PG: M.Tech PhD

6. Total Experience in Years: 5 Teaching: 5 Year Industry: Research:

7. Paper Published: 04National: Nil International: 04

8. Paper Published in Conference: International: 02

65

RESUME

1. Name:RamandeepKaur

2. Designation: Assistant professor

3. Department:ECE


5. Qualification with Class/Grade: UG: B.Tech PG: M.TechPhD: Nil

6. Total Experience in Years:Teaching: 3+ Industry: NilResearch: Nil


66

RESUME

1. Name: ARUN RANI


3. Department: ECE


5. Qualification with Class/Grade: UG:B.Tech/Ist PG:M.Tech/IstPhD: (pur.)

6. Total Experience in Years: Teaching: 2.5 Industry: Research:



09. Professional Memberships:IAENG

67

RESUME

1. Name: InderbirKaur


3. Department: ECE


5. Qualification with Class/Grade: UG:B.TechPG:M.Tech

6. Total Experience in Years: 01 Teaching: 01

7. Paper Published: 03 International: 03

8. Paper Published in Conference:01 International: 01

68

RESUME

1. Name: AmanpreetKaur


3. Department: ECE


5. Qualification with Class/Grade: UG: B.Tech/IstPG: M.Tech/Ist


7. Paper Published in Conference: 1National: 1

69

Department of Computer Science & Engineering

1 Name

KRISHAN SALUJA

2 Designation

Associate Professor

3 Department

Computer Science and Engineering

4

Date of Joining

01-08-1996

5

Qualification With Class/

Grade

UG(B-Tech) PG(M.S.) Ph.D

6 Total Experience in Years

Teaching:17 Years Industry: Research: 03

7 Paper Published

National:50: International:50

8

Paper Published in

Conference

National:04 International:40

9 PhDs/ Projects Guided

01/45

10 Books Published/IPRs/Patents

03

11 Professional Memberships

ISTE Membership

70

12

Interaction with Professional

Institutions

Yes

71

1 Name

MONIKA SACHDEVA

2 Designation

Associate Professor

3 Department


4

Date of Joining

25-08-1998

5


Grade

UG(B-Tech) PG(M.S.) Ph.D


Teaching: 18 Years Research:08

7 Paper Published

National:03 International 50

8

Paper Published in

Conference

National: 02 International 30

9 Projects Guided

30


ISTE Membership

72

12 Grants

yes

13

Interaction with

Professional Institutions

Yes

73

1 Name

NAVTEJ SINGH GHUMMAN

2 Designation

ASST. PROF.

3 Department

CSE

4

Date of Joining

31-8-1998

5


Grade

UG:B-TECH(CSE) PG:M.E. (CSE) PhD;Pursuing


Teaching:19

7 Paper Published

International: 10

8 Paper Published in Conference

National: 02 International: 02

9 Projects Guided

10

74

1 Name

ABHILASHA

2 Designation

LECTURER

3 Department

CSE

4

Date of Joining

27-JULY-2016

5


Grade

UG:B-TECH (CSE) PG: M-TECH (CSE)

6

Total Experience in

Years

Teaching: 0.5 YEAR

7 Paper Published

International: THREE

75

1 NAME

AMAR SINGH

2 DESIGNATION

ASSISTANT PROF.

3 DEPARTMENT

CSE

4

DATE OF JOINING

27-JULY-2016

5

QUALIFICATION

WITH CLASS/ GRADE

UG: B-TECH (CSE) PG: M-TECH (CSE)

6

TOTAL EXPERIENCE

IN YEARS

TEACHING: TWO YEARS

7 PAPER PUBLISHED

INTERNATIONAL: THREE

76

1 Name

BHAVNEET KAUR

2 Designation

ASSISTANT PROF.

3 Department

CSE

4

Date of Joining

27-JULY-2016

5


Grade


6

Total Experience in

Years

Teaching: THREE

7 Paper Published

National: THREE International: FOUR

77

1 Name

BOHAR SINGH

2 Designation

ASSISTANT PROF.

3 Department

CSE

4

Date of Joining

27-JULY-2016

5


Grade

UG:B-TECH (CSE) PG: M-TECH (CSE)

6

Total Experience in

Years

Teaching: 4+ YEAR

7 Paper Published


8

Paper Published in

Conference

National: ONE International: ONE

78

1 Name

DALJEET KAUR

2 Designation

ASSOCIATE PROF.

3 Department

CSE

4

Date of Joining

27-8-1998

5


Grade

UG:B-TECH(CSE) PG:M-TECH(CSE) PhD


Teaching:19

7 Paper Published

International: 10

79

1 Name

Deepak Sharma

2 Designation

Assistant Professor

3 Department

Computer Science & Engg.

4

Date of Joining

27-07-2016

5


Grade

UG: B. Tech (CSE) PG: M. Tech (CSE)

6

Total Experience in

Years

Teaching: 03

7 Paper Published

International 02

80

1 Name

Dheerajpal Singh Brar

2 Designation

Assistant Professor

3 Department


4

Date of Joining

27-07-2016

5

Qualification With

Class/ Grade


6

Total Experience in

Years

Teaching: 02 +

7 Paper Published

International 02

8

Paper Published in

Conference

National: 04

9 Professional

Memberships

Life time member of ISTE-(No. LM-105677)

81

10

Awards

Recognized as BRONZE partner faculty under the inspire-

The Campus Connect Faculty Partnership Model of Infosys

1 NAME

GAGANDEEP

2 DESIGNATION

ASSISTANT PROF.

3 DEPARTMENT

CSE

4

DATE OF JOINING

27-JULY-2016

5

QUALIFICATION

WITH CLASS/ GRADE


6

TOTAL EXPERIENCE

IN YEARS

TEACHING: 4+

7 PAPER PUBLISHED

INTERNATIONAL: FOUR

82

1 Name

Gurbhej Singh

2 Designation

Assistant Professor

3 Department


4

Date of Joining

27-07-2016

5


Grade


6

Total Experience in

Years

Teaching: 03

7 Paper Published

International 07

8 Professional

Memberships Life time member of ISTE-(No. LM-105315)

International Association of Engineers (Member No-164930)

83

9

Awards

Recognized as BRONZE partner faculty under the inspire-

The Campus Connect Faculty Partnership Model of Infosys

1 Name

ISHA CHAWLA

2 Designation

ASSISTANT PROF.

3 Department

CSE

4

Date of Joining

27-JULY-2016

5

Qualification With

Class/ Grade


6

Total Experience in

Years

Teaching: ONE YEAR

7 Paper Published


8

Paper Published in

Conference

National: ONE International: ONE

84

1 Name

Japinder Singh

2 Designation

Asstt Professor

3 Department

Computer Sc & Engg

4

Date of Joining

27/08/1998

5


Grade UG: 1

st Div

PG: 1

st Div PhD:Pursuing


Teaching: 14

Industry: 7

7 Paper Published

National: 2


National:05

International -- 06

9

PhD Guide? Give field &

University Pursuing, Punjabi University Patiala.

Supervisor: Dr Balkrishan, YCoE, Talwandi Sabo,Punjab

10 Projects Guided

05

11 Books Published/IPRs/Patents

Book Chapter -02

85

14 Awards “Bronze Faculty Partner” by Infosys

15 Grants

Finance Coordinator TEQIP-II

86

1 Name

KHUSHJEET KAUR

2 Designation

ASSISTANT PROF.

3 Department

CSE

4

Date of Joining

27-JULY-2016

5

Qualification With

Class/ Grade


6

Total Experience in

Years

Teaching: 1+

7 Paper Published

International: FOUR

87

1 Name

MALKEET SINGH

2 Designation

Assistant Professor

3 Department

CSE

4

Date of Joining

27/07/2016

5


Grade

UG:B.TECH CSE PG: MTECH CSE PhD


Teaching: 1-3 Yrs Research: 1 Yrs

7 Paper Published

National: International: 2

88

1 Name:

Manpreet Kaur Aulakh

2 Designation :

Assistant Professor

3 Department :

CSE

4

Date of Joining:

28 july,2016

5

Qualification With Class/ Grade

UG: B.Tech (Grade-A)

PG: M.Tech(Grade-A)


Teaching: 2Yr

7 Paper Published

International: 5


International: 1

89

1 NAME

Parminder Kaur Sandhu

2 DESIGNATION

LECTURER

3 DEPARTMENT

CSE

4

DATE OF JOINING

27-JULY-2016

5

QUALIFICATION

WITH CLASS/ GRADE


6

TOTAL EXPERIENCE

IN YEARS

TEACHING: THREE YEAR

7 PAPER PUBLISHED

INTERNATIONAL: TWO

90

1 Name

Pawan Luthra

2 Designation

Assistant Professor

3 Department


4

Date of Joining

27-07-2005

5

Qualification With

Class/ Grade B-Tech and M-Tech 1

st Division

6

Total Experience in

Years

Teaching: 12 Years Research: 4 Years

7 Paper Published


8

Paper Published in

Conference


9 Projects Guided

20

10

Professional

Memberships ISTE Membership

91

16

Interaction with

Professional

Institutions

Yes

1 NAME

POONAM

2 DESIGNATION

ASSISTANT PROF.

3 DEPARTMENT

CSE

4

DATE OF JOINING

27-JULY-2016

5

QUALIFICATION

WITH CLASS/ GRADE


6

TOTAL EXPERIENCE

IN YEARS

TEACHING: 7+ YEAR

7 PAPER PUBLISHED

INTERNATIONAL: ONE

8

PAPER PUBLISHED IN

CONFERENCE

INTERNATIONAL:ONE

92

1 Name

SONIKA JINDAL

2 Designation

ASSISTANT PROFESSOR

3 Department

COMPUTER SCIENCE & ENGG

4 Date of Joining 19-10-2001

5

Qualification With Class /

Grade

UG: B.TECH

PG: M.TECH PhD: ONGOING


Teaching: 18 YEARS

7 Paper Published

National: 8

International: 30

8

Paper Published in

Conference National: 6

International: 15

9

PhD Guide? Give field &

University Dr. Dinesh Kumar, Computer Science & Engg, Guru kasha University,

Talwandi Sabo.

10 Projects Guided

15


LM34568 ISTE, IAENG MEMBER: 179534

93

1 Name

Vishal Arora

2 Designation

Assistant Professor

3 Department


4

Date of Joining

23-12-2008

5


Grade B-Tech and M-Tech 1

st Division


Teaching: 13 Years

7 Paper Published




9 Projects Guided

20

94

Department of Civil Engg.

RESUME

1. Name: BOHAR SINGH


3. Department: Civil engg.


5. Qualification with Class/Grade: UG: 1st PG: 1st PhD

6. Total Experience in Years: Teaching: 10 yrs Industry: 02 years


95

RESUME

1. Name: Parampreet Kaur

2. Designation: A.P

3. Department: Civil Engg


5. Qualification with Class/Grade: UG: B.Tech(75.6%), Mtech(69.6%), P.H.D:- Persuing

6. Total Experience in Years: 5 +years

Teaching: 5+ years

7. Paper Published National: 01 International: 02

8. Paper Published in Conference National: 04 International: 05

9. PhD Guide? Give field & University: Dr. Varinder Singh(Guru kashi university talwandi sabho)

10. PhDs/Projects Guided: Dr. Varinder Singh(Guru kashi un iversity talwandi

sabho)

11. Professional Memberships: Indian jeotechnical Delhi chapter : Indian jeotechnical Ludhiana chapter Indian institute valuers

12. Awards: Gold medal in M.Tech 9th position in PTU in 7th sem of B.tech 96

RESUME

1. Name: DAPINDER DEEP SINGH

2. gnation: Assistant professor



5. Qualification with Class/Grade: UG: 1st PG: 1st



97

RESUME

1. Name: GURPREET SINGH







98

RESUME

1. Name: AMANDEEP




5. fication with Class/Grade: UG: 1st PhD

6. Total Experience in Years: Teaching: 1.5 yrs 99

RESUME

1. Name: BALJINDER SINGH




5. Qualification with Class/Grade: UG: 1st PG: Pursuing

6. Total Experience in Years: Teaching: 1/2 yrs

7. Paper Published: National: International:

8. Paper Published in Conference: National: 01

100

RESUME

1. Name: GURKAMAL SINGH




5. Qualification with Class/Grade: UG: 1st PG: PhD

6. Total Experience in Years: Teaching: 1/2 yrs 7. Paper Published in Conference: National: 01

101

RESUME

1. Name: GURSIMRAN SINGH DHALIWAL




5. Qualification with Class/Grade: UG: 1st PG: 1ST

6. Total Experience in Years: Teaching: 1/2 yrs


102

RESUME

1. Name: RAMANDEEP SINGH BRAR





6. Total Experience in Years: Teaching: 2.5 yrs , Industry: 1.5 YEARS ,


103

RESUME

1. Name: SAMANT SHARMA





6. Total Experience in Years: Teaching: 1.5 yrs

7. Paper Published in Conference: National: 07 8.

104

RESUME

1. Name: SIDHANT CHOPRA






7. Paper Published in Conference: National:15

105

RESUME

1. Name: SOURABH SHARMA




5. Qualification with Class/Grade: UG: 1st PG: 6. Total Experience in Years: Teaching: ½ yrs

7. Paper Published in Conference: National:02 . 106

RESUME

1. Name: SUKHVEER SINGH





6. Total Experience in Years: Teaching: 1 yrs Industry: ½ YRS


107

RESUME

1. Name: SURINDER SINGH







108

Department of Electrical Engineering

RESUME

1. Name: Dr.Kultar Deep Singh

2. Designation: Asso Proff

3. Department: Electrical


5. Qualification with Class/Grade: UG: Btech PG: Mtech PhD:Yes

6. Total Experience in Years: Teaching: 12yrs+



109

RESUME

1. Name: Navneet Kaur

2. Designation: Asst Proff



5. Qualification with Class/Grade: UG: Btech PG: Mtech




110

RESUME

1. Name: Anupam Mittal





6. Total Experience in Years: Teaching: 11.6yrs+



111

RESUME

1. Name: Harinder Pal Singh




5. Qualification with Class/Grade: UG: Btech PG: Mtech PhD:persuing




112

RESUME

1. Name: Maninder




5. Qualification with Class/Grade: UG: Btech PG: Mtech PhD




113

RESUME

1. Name: Inderjit Singh

2. Designation: Asst Proff(Contract)






8. Paper Published in Conference: National: 01 114

RESUME

1. Name: Ajay Wadhawan

2. Designation: Asst Proff(Consolidated)





7. Paper Published in Conference: National: 02 International:01

115

R

E

S

U

M

E

1. Name: Amandeep Singh Sran




5. Qualification with Class/Grade: UG: Btech PG: Mtech (persuing) PhD


7. Paper Published: National:04


116

RESUME

1. Name: Karan Anand





6. Total Experience in Years: Teaching: 6months+



117

R

E

S

U

M

E

1. Name: Major Singh Sidhu




5. Qualification with Class/Grade: UG: Btech PG: Mtech (persuing) PhD




118

RESUME

1. Name: Ravneet Kaur







119

Department of Mechanical Engineering

RESUME

1. Name: Dr. Manoj kumar Kushwaha

2. Designation: Associate Professor

3. Department: Mechanical Engg.


5. Qualification with Class/Grade: UG: 1st Div PG: 1st Div PhD: 1st Div

6. Total Experience in Years: Teaching: 27.4 Industry: 06 Research:05

7. Paper Published: National: International: 06


9. PhD Guide? Give field & University: 09 candidates (in progress) IKGPTU, JAANDHAR

10. Professional Memberships: ISTE

11. Grants: 05lakhs (MODROB)

120

RESUME

1. Name: Dr. Tejeet Singh


3. Department: ME


5. Qualification with Class/Grade: UG: 1st Div PG: 1st Div PhD:1st Div

6. Total Experience in Years: Teaching: 19.6

7. Paper Published:

International: 14

8. Paper Published in Conference:

International: 33

9. PhD Guide? Give field & University: 08

121

RESUME

1. Name: Rakesh kumar

2. Designation: Associate professor

3. Department: Mechanical


5. Qualification with Class/Grade: UG: 1st PG: 1st PhD:- 1st




9. PhDs/Projects Guided: 10 in progress


11. Consultancy Activities: NIL

12. Grants: 1 Lakh seminar Grant, 7 lakh conference grant.

122

RESUME

1. Name: Dr. Manjinder singh

2. Designation: Associate professor



5. Qualification with Class/Grade: UG: yes PG: yes PhD yes

6. Total Experience in Years: 18 yrs Teaching: 18 yrs



123

RESUME

1. Name: Dr. RAVINDERPAL SINGH

2. Designation: ASSOCIATE PROFESSOR

3. Department: MECHANICAL


5. Qualification with Class/Grade: UG: YES PG: YES PhD: YES

6. Total Experience in Years: 17 Teaching: 12 Research:05

7. Paper Published: 06 National:02 International: 03


124

RESUME

1. Name: Dr. ARUN KUMAR ASATI




5. Qualification with Class/Grade: UG: YES PG: YES PhD: YES

6. Total Experience in Years: 23.5 Teaching: 23.5



9. PhDs/Projects Guided: 02


125

RESUME

1. Name: SUKHWANT SINGH



4. Qualification with Class/Grade: UG: YES

5. Total Experience in Years: 18.5 Teaching: 16.5 Industry: 02

6. Paper Published: National: 01

7. Professional Memberships: ISTE 126

RESUME

1. Name: VAISHALI GOYAL




5. Total Experience in Years: 22 Teaching: 19 Industry: 03



127

RESUME

1. Name: D.P. KASHYAP




5. Qualification with Class/Grade: UG: YES PG: YES

6. Total Experience in Years: 17 Teaching: 16 Industry: 01 :


128

RESUME

1. Name: MUNISH DHIR







129

RESUME

1. Name: JWALA PRASAD





6. Total Experience in Years: 19 Teaching: 17.5 Industry: 1.5



9. Books Published/IPRs/Patents: 01

130

RESUME

1. Name: SUKHJINDER SINGH


3. Department: MECHANCAL


5. Qualification with Class/Grade: UG: YES PG: YES PhD: PURSUING

6. Total Experience in Years: 08yrs Teaching: 07yrs Research:01


8. Paper Published in Conference:09 National: 07 International: 02

131

RESUME

1. Name: GURNAM SINGH






132

RESUME

1. Name: VIVEK SOOD




5. Qualification with Class/Grade: UG:YES

6. Total Experience in Years: 23 Teaching:20 Industry: 03

133

RESUME

1. Name: VEERPAL SOI








134

RESUME 1. Name: Hitesh Uppal








135

RESUME

1. Name: VARINDER SINGH







136

RESUM

E

1. Name: ASHISH GUPTA







137

RESUM

E

1. Name: Mr. Navjot pal singh




5. Qualification with Class/Grade: UG: YES PG: YES PhD: PURSUING




138

RESUME

1. Name: ANKUSH BATTA





6. Total Experience in Years: 6.2 Teaching: 2.7 Industry: 3.7



139

RESUME

1. Name: BALPREET SINGH






7. Paper Published in Conference:04 National: 01 International: 03

140

RESUME

1. Name: RAJNEESH KUMAR

2. Designation: LECTURER



5. Qualification with Class/Grade: UG: YES




141

RESUME

1. Name: BALJEET SINGH





6. Total Experience in Years: 0. 10 Teaching: 0.10


142

RESUME

1. Name: MUKESH KUMAR




5. Qualification with Class/Grade: UG: YES PG: PURSUING


7. Paper Published: NIL International: 02

8. Professional Memberships: SAE

143

RESUME

1. Name: YOGITA SHARMA






144

RESUME

1. Name: Ranjeet Singh Brar


3. Department: Mechancial




145

RESUME

1. Name: Jaskaran Singh


3. Department: Mechancial




146

Department of Chemical Engineering

RESUME

1. Name: Rajiv Arora

2. Designation: Assistant Prof.

3. Department: Chemical Engineering


5. Qualification with Class/Grade: UG: B.Tech (Chemical & Bio Engg), Ist Division

PG: M.Tech ( Chemical Engg), Ist Division , PhD: Yes

6. Total Experience in Years: Teaching: 16.5 Industry: 4.5 Research: 6

7. Paper Published: National: 01 International: 03


9. PhD Guide? Give field & University: Prof Amrit Pal Toor & Prof. R K

Wanchoo, Panjab University, Chandigarh

10. Books Published/IPRs/Patents: 01 patent filed

11. Professional Memberships: Life member of Indian Institute of Chemical Engineers

Life member of Indian Society for Technical Education

12. Consultancy Activities: Project with Punjab Pollution Control Board

Projects with A P Solvex, Dhuri

Project with BLV Exports pvt Limited, Ferozepur

13. Awards:

Awarded 1

st Prize for Paper Presentation in ‘6th

Chandigarh Science Congress

(Chascon-2012) held at Panjab University, Chandigarh in Feb 2012.

Awarded second prize for major project entitled ‘Valuable Products from waste rice bran” in TECHNO-OPUS-2014 organized in SBSSTC, Ferozepur in 2014

Awarded 2

nd Prize for Paper Presentation in ‘9th

Chandigarh Science Congress

Chascon-2015) held at Panjab University, Chandigarh in 2015

Awarded Best Paper in National Conference National Conference on Energy, Economy and Environment, at National Institute of Technology, Calicut on Dec 16-17, 2016.

147

14. Interaction with Professional Institutions:

Chairperson- Board of Studies (Chemical Engg), Maharaja Ranji Singh Punjab Technical

University, Bathinda

Member- Board of Studies (Chemical Engg.), I K Gujral Punjab Technical University, Kapurthala.

Member- Board of Studies (Petro-Chemical Engg.), Guru Kashi University, Talwandi Sabo (Punjab)

148

RESUME

1. Name: Dr. Amit Arora




5. Qualification with Class/Grade: UG: B.Tech ( Chemical Engineering )/ First Class ,

PG M.Tech(Environmental Science and Engg. )/First class

Ph.D : Chemical Engineering/ A Grade

6. Total Experience in Years: Teaching: 15 years Research:4 years

7. Paper Published: National Journal : 01

International: 08


9. Professional Memberships: Member ISTE, Delhi Membership of IIChE

10. Interaction with Professional Institutions: Dean Academics ( Affiliation and Approval)

activities interaction with MRSPTU Bathinda,AICTE New Delhi.

149

RESUME

1. Name: Pankaj Kalra

2. Designation: Asst. Professor



5. Qualification with Class/Grade: UG: B.E. (Chemical Engg.) PG: M. tech. (Chemical Engg.) PhD: Pursuing


Industry: 2 Research: 3



9. Professional Memberships: Life member ISTE


Member BOS of Chemical Engg. MRSSTU, Bathinda. Member BOS of Chemical Engg. SBSSTC, Ferozepur. Member BOS of Petroleum Engg., GGSCET,Guru Kashi University, Talwandi Sabo.

150

RESUME

1. Name: SURINDER SINGH


3. Department: Chamical Engg.


5. Qualification with Class/Grade: UG: B.E. (Chemical Engg.) PG: Mtech. Pursuing

6. Total Experience in Years: 27 Teaching: 17 Industry: 10 Research: 1

7. Professional Memberships: ISTE Life time member

8. Interaction with Professional Institutions: Member BOS, Petroleum Engg., Guru Kashi

University, Talwandi Saboo

151

RESUME

1. Name: Rajeev Kumar Garg




5. Qualification with Class/Grade: UG: B.E. (Chemical Engg.) 1st class PG: M. E. (Chemical Engg.) 1st class PhD (Chemical Engg.)

6. Total Experience in Years: Teaching: 18 Industry

: 3 Researc

h: 3



9. PhD Guide? Give field & University: Yes, Modeling and Simulation, IKGPTU Jalandhar

10. PhDs/Projects Guided: 03 ongoing

11. Books Published/IPRs/Patents: 02 book chapters

12. Professional Memberships: Life Member ISTE, Life Member IIChE

13. Grants: MODROBS grants – 02 projects completed


Member BOS of Chemical Engg. MRSPTU, Bathinda. Member BOS of Chemical Engg., IKGPTU, Jalandhar Member BOS of Chemical Engg. SBSSTC, Ferozepur.

152

RESUME

1. Name: Balpreet Kaur


3. Department: Chemical Engg.


5. Qualification with Class/Grade: UG: B.Tech (Chemical) 1st Division PG: M.Tech Environment Sci & engg (Honors with Distinction) PhD pursuing

6. Total Experience in Years: 18 yrs 6months Teaching:18 yrs Industry: 6months Research: 6months



9. PhD Guide? Give field & University: Dr H.Bhunia ( Environment Sci) Thapar

University

10. Professional Memberships: LM ISTE

11. Awards:

Merit Certificate of standing IInd in Btech. Examinations securing Ist division with Honors

Merit Certificate of standing Ist in Mtech. Examinations securing Ist division with distinction.

Awarded Best Poster Award At 3rd National Conference (RACES-2011),held at Patiala Awarded 2nd Prize at 4th National Conference (RACES-2012),held at Patiala Awarded second prize for major project entitled Removal and Recovery of

Phosphorous from Waste Water by using Magnetite in TECHNO-OPUS-2014 organized in SBSSTC, Ferozepur

Awarded third prize for major project entitled Comparative study of isolation of nano crystalline cellulose from rice husk and wheat straw in TECHNO-OPUS-2015 organized in SBSSTC, Ferozepur

153

Department of Applied Sciences & Humanities

RESUME

1. Name: Dr. Anand K Tyagi

2. Designation: Professor (Physics; Mat. Sc. &Engg.)

3. Department:Applied Sciences

4. Date of joining the Institution: 10th July 1995

5. Qualification with Class/Grade: UG: 1stDivn. PG: 1stDivn. PhD: yes; in 1995

6. Total Experience in Years: Teaching: 30 yrs Paper Published: National: 19International: 40


8. PhD Guide? Give field & University:

Yes, Physics; Mat. Sc. &Engg./PunjabTechnicalUniversity

9. PhDs/Projects Guided: PhD: 02 (completed) + 09 (in progress). Projects: 04 (completed) + 01 (in progress)

10. Books Published/IPRs/Patents: Books: 03

11. Professional Memberships: 08 Scientific/Professional Societies

12. Awards:

Rheometeric –ITAS award 2000 for outstanding research: Rheometeric scientific, UK

and Indian Thermal Analysis Society (ITAS), Bhabha Atomic Research Centre, Mumbai.

Invited by World Scientific &Engg. Academy, Italy for delivering Invited talk and

chairing a Technical Session International Conference.

Best Scientist Award: National Council for Cements And Building materials, New Delhi

(1988).

Outstanding Achievement award 1999: International biographical Centre, Combridge.

Man of Achievement award 1998: International Publishing House, New Delhi.

Vijay Shree Award: India International Friendship Society, New Delhi. (1996).

Appointed Dean Faculty of Applied Sciences, Member Academic Council and

Chairperson BOS at PunjabTechnicalUniversity

13. Grants: Total grant fetched 10.30 Crores

14. Interaction with Professional Institutions: IIM Kolkata, IIM Kozhikode,World Scientific

&Engg. Academy, Italy, Material Reserch Society (USA), Commonwealth Scientific and

Industrial Research Organization (CSIRO) Melbourne, International Association of

Engineers, London (U.K.). Materials Research Society Mexico.

154

1. Name : Dr. LALIT SHARMA

2. Designation : Associate Professor Chemistry & Associate Director

3. Department : Applied Chemistry

4. Date of Joining : 01-06-1995

5. Qualifications : M.Sc (Hons.) , Ph.D , Post Doc (UNL, EU)

6. Total Experience in Years :

I ) Teaching : 26 years

ii) Industry : 1.5 years

iii) Research : 30 years

7. Paper Published a) National 08 b) International 18

8. Paper Published in Conferences a) National 06 b) International 04

9. Ph.D Guided : 05.

10. Ph.D / Project Guided : 03

11. Professional Memberships : 06

12. Member of professional society : 06

13. Awards : 05

14. Grants : 70 Lakhs

155

RESUME

1. Name: Dr. Ajay Kumar

2. Designation: Associate Professor& Head

3. Department: Applied Sciences & Humanities


5. Qualification with Class/Grade: UG: B.Sc. (Physics Hons.) - 1st Class PG: M.Sc. Physics -1st Class PhD: Physics Awarded

6. Total Experience in Years:Teaching: 24 years 06 months

Research: 34 years



9. PhD Guide? Give field & University: Yes/ Solid state ionic materials & devices/ IKG PTU, Kapurthala

10. PhDs/Projects Guided: Ph.D. – 02

Project - 02

11. Books Published/IPRs/Patents: Proceeding - 01

12. Professional Memberships: Life member of Indian Society for Solid State Ionics

13. Grants: 12 lakhs DST project (Co-investigator)

05 lakhs MODROBS (Co-investigator)

14. Interaction with Professional Institutions: IKGPTU, Kapurthala 156

RESUME

1. Name: Dr. Sangeeta Sharma

2. Designation:Associate Professor

3. Department: Applied sciences & Humanities


5. Qualification with Class/Grade:UG: B.Sc./ First Class,

PG: M.Sc(Chem.)/First class Ph.D :Chemistry

6. Total Experience in Years:Teaching:21years

Research: 20 years


International: 24

8. Paper Published in Conference: National:05 International:02

9. PhDs/Projects Guided: Ph.Dstudents guided: 01 Ph.D students registered: 04 Projects guided:01

10. Professional Memberships: Member ISTE, Delhi

11. Grants: AICTE Grant worth Rs. 6.00 Lakh

12. Interaction with Professional Institutions: Research activities interaction with PTU, Jalandhar

157

RESUME

1. Name: Dr. Anila Gupta

2. Designation: Associate Prof


4. Date of joining the Institution:` 25 June 1996

5. Qualification with Class/Grade: UG: 1stDiv PG: 1stDiv PhD: Maths Awarded

6. Total Experience in Years:Teaching:23 yrs Research: 5yrs


8. Paper Published in Conference: National: 2 (presented)

International: 2 (presented)

9. PhD Guide? Give field & University: One (Fuzzy Optimization from PTU, Jallandhar)

10. Professional Memberships: Life Member, Indian Mathematical Society Life Member, Indian Science Congress Association Life Member, ISTE

158

RESUME

1. Name: Dr Kul BhushanAgnihotri

2. Designation: Assoc. Prof.



5. Qualification with Class/Grade: PhD (Maths) A Grade, PG:Msc (Maths) (IstDiv), UG: BA(IstDiv ),

6. Total Experience in Years:Teaching:24 years Industry: Nil, Research: 11yrs



9. PhD Guide? Give field &University:BioMaths (IKG PTU Jal)

10. PhDs/Projects Guided: 01 and 07 in progress

11. Professional Memberships: LM ISTE, LM IAPS (India), LM Biological Society of India(JadavpurUni)

12. Awards: Young Scientist Award

13. Interaction with Professional Institutions: IIT Roorkee

159

RESUME

1. Name: Kiranjeet Kaur




5. Qualification with Class/Grade: UG: II PG: I PhD: Awarded in 2012

6. Total Experience in Years: Teaching: 20 yrs Industry: Research: 6


8. Paper Published in Conference: National: 5 International: 7 9. PhD Guide? Give field & University:1 enrolled, MRSPTU, Bathinda.

10. -


160

RESUME

1. Name: RAKESH KUMAR

2. Designation:Assistant Professor



5. Qualification with Class/Grade: UG: Graduation(1st) PG: M.Sc.(1st) PhD: Pursuing

6. Total Experience in Years:Teaching:12


8. Grants: Project of Rs 8.0 Lacs under MODROBS(AICTE) in the year 2007-08.

161

RESUME

1. Name: K Sunil Behal




5. Qualification with Class/Grade: UG:B.Sc(1st div) PG: M.Sc.(1st div), CSIR UGC NET All India Rank:05

6. Total Experience in Years: Teaching: 12 years


162

RESUME

1. Name: Geetu Bansal




5. Qualification with Class/Grade: UG: BA(1st div) PG: M.Sc.(1st div), M.Phil

6. Total Experience in Years: Teaching: 12 years

163

RESUME

1. Name: Neeti Grover


3. Department: Department of Applied Science & Humanities


5. Qualification with Class/Grade: UG:B.Sc. Non- Medical 2ndDivision PG: M.Sc Mathematics1st Division

B.Ed

6. Total Experience in Years: Teaching: 5years




164

RESUME

1. Name: Vijeta Thakur




5. Qualification with Class/Grade: UG: B-Com (E Commerce Hons.)1st Division PG: MBA (Finance & HRM)1st Division

6. Total Experience in Years:Teaching: 5 Yrs

7. PhD Guide? Give field & University: No

165

RESUME

1. Name: Jasbir Sharma


3. Department: Applied Sciences and Humanities

4. Date of joining the Institution: 11 Aug 2013

5. Qualification with Class/Grade: UG: B.Sc.(Comp.Sci.) 1stDiv PG:M.Sc.(Hons.) Phy1stDivPhD: No

6. Total Experience in Years: Teaching: 3Years

166

RESUME

1. Name: Jyoti Sharma




5. Qualification with Class/Grade: UG:BA Computer Science 1st Division PG: MA English (Literature) 1st Division

B.Ed

6. Total Experience in Years: Teaching: 2.5 Yrs

167

RESUME

1. Name: Rajwant Kaur




5. Qualification with Class/Grade: UG:B.Sc 1st Division PG: M.Sc(chemistry)1st Division

B.Ed,NET,GATE.

6. Total Experience in Years: Teaching: 1.5 Yrs

168

Department of Architecture

RESUME

1. Name: Ar. Aakriti Ahuja Manchanda


3. Department: School of Architecture

4. Date of joining the Institution: 30 May, 2015

5. Qualification with Class/Grade: UG: a) B.Architecture 62.11%/ Ist Division (G.N.D.U. Amritsar) b) M.Architecture 75.3%

6. Total Experience in Years: Teaching: 3.5 +

Proffesional practice : 2+

7. Paper Published in Conference: National: 5 International: -- 1

8. Professional Memberships: Council Of Architecture, The Indian Institute of Architects

169

RESUME

Name: Ar.Esha Sharma



3. Date of joining the Institution: 27 July 2015

4. Qualification with Class/Grade: UG: a) B.Arch.(silver medalist/1st division -78.53%, P.T.U) b) Graduate Diploma in Construction Management

(98.6 percentile) c) Diploma in Architecture

(Bronze medalist in Punjab-1st division -78.53%, P.T.U)

5. Total Experience in Years: 4 +years (professional practice)

Teaching: 1.5 Years


7. Professional Memberships: C.O.A

8. Awards:

a) Silver medalist in B.Arch. - 1st division(P.T.U) b) PIDILITE cash award for best design on space utilization( by: Pedilite Industries Ltd.) c) Acadamic Excellence d) Award for best Creative Designer e) Award for Best Model Maker f) 1st position in Memento in Zonal NasaConvention g) 1st position in De- Shene in Arcanzo held in C.S.P.A. h) Bronze Medalist in Diploma in Architecture- All over Punjab-1st Division with

Honors(P.T.U) 170

RESUME

1. Name: Ar.Sandeep Singh



4. Date of joining the Institution: 16 Dec, 2016

5. Qualification with Class/Grade: UG: a) B.Architecture 60.33% b) M.Architecture (Sustainable Architecture) 62.6%

6. Total Experience in Years: Teaching: 1year 5 month From Chandigarh University

7. Professional Memberships: Council Of Architecture, The Indian Institute of Architects

8. Awards:

a) Rashtrapati Award in The Bharat Scout And Guide. 171

Department of Computer Applications & Management

RESUME

1. Name: Dr. Gulshan Kumar


3. Department: Computer Applications


5. Qualification with Class/Grade: UG: BSc PG: MCA/MTech(CSE) PhD:-yes

6. Total Experience in Years: Teaching: 15 Years



9. PhD Guide? Give field & University: Yes, Network Security, Intrusion Detection, Feature

Selection, Malware Detection

10. PhDs/Projects Guided: PhD (Guiding) – 02, M Tech - 06

11. Books Published/IPRs/Patents: Books -05

172

RESUME

1. Name: Dr. Raminder Pal Singh


3. Department: Computer Applications & Management

4. Date of joining the Institution: October, 1998

5. Qualification with Class/Grade: UG: B.Com. PG: MBA PhD: Business Studies

6. Total Experience in Years: Teaching: 18 years Industry: 3 years



9. PhD Guide? Give field & University: Business Studies (Marketing & Finance), Punjab

Technical University, Kapurthala

10. Books Published/IPRs/Patents: Book: 1

173

RESUME

1. Name: Davinder Singh

2. Designation: A.P

3. Department: Compurt Application

4. Date of joining the Institution: 01/August/2016

5. Qualification with Class/Grade: UG: PG: yes




174

RESUME

1. Name: RITIMA ARORA


3. Department:MBA

4. Date of joining the Institution: 18/AUG/2016

5. Qualification with Class/Grade: UG: B.COM PG: MBA

6. Total Experience in Years:Teaching:0.6 Industry: 2

175

RESUME

1. Name: Harbeer Kaur

2. Designation: AP

3. Department: MBA

4. Date of joining the Institution: 1 august 2016

5. Qualification with Class/Grade: UG: PG: MBA

6. Total Experience in Years: 2.3 Yrs Teaching: 2.3 Yrs

176

RESUME

1. Name: Meenu Bala Singla

2. Designation: AP

3. Department: MCA


5. Qualification with Class/Grade: UG: BCA ,PGDCA PG: MCA

6. Total Experience in Years: Teaching: 5YEAR

177

RESUME

1. Name: Harmeet kaur

2. Designation: AP

3. Department: MBA

4. Date of joining the Institution: 5 September 2015


6. Total Experience in Years: 1yrs Teaching: 1 yrs


178

RESUME

1. Name: kulwinder Kaur

2. Designation: AP

3. Department: MBA

4. Date of joining the Institution: 1Aug,2016

5. Qualification with Class/Grade: UG: PG: MCA

6. Total Experience in Years: 3.6 yrs Teaching: 3.6 yrs

179

RESUME

1. Name: Manisha

2. Designation: AP

3. Department: MCA

4. Date of joining the Institution: 7 Jan,2013


6. Total Experience in Years: 5.5 yrs Teaching: 4 yrs Industry: 1.5

Research:



180

RESUME

1. Name: Navdeep Kaur

2. Designation: AP

3. Department: CA/Mgmt Deptt.

4. Date of joining the Institution: 01 Aug,2016


6. Total Experience in Years: 1.6 yrs Teaching: 6 months

Research: 1 year

181

RESUME

1. Name: Sania Sethi

2. Designation: AP

3. Department: MCA

4. Date of joining the Institution: 24 March, 2014


6. Total Experience in Years: 3yrs Teaching: 3 yrs



182

RESUME

1. Name: Shiny Sharma

2. Designation: AP

3. Department: MCA

4. Date of joining the Institution: 28 July,2014




183

RESUME

1. Name: Amanjeet Kaur

2. Designation: AP

3. Department: MCA

4. Date of joining the Institution: 1Aug,2016


6. Total Experience in Years: 6 yrs Teaching: 6 yrs



184

RESUME

1. Name: SONAMDEEP KAUR

2. Designation: AP(MCA)

3. Department: COMPUTER APPLICATIONS

4. Date of joining the Institution: 20 JULY 2013

5. Qualification with Class/Grade: UG: BCA PG: MCA

6. Total Experience in Years: 3.5 Years Teaching: 3.5 years



185

RESUME

1. Name: Ritika

2. Designation: AP

3. Department: MCA

4. Date of joining the Institution: 28 July,2014




186

Annexure -I

187

DETAILS OF VARIOUS LABS. / WORKSHOPS CREATED

(A) DEPARTMENTAL LABS

Sr.

No.

Name of

the

Course

Name of the

laboratory /

workshop

Total

Area

of

lab/works

hop (Sq. m.)

Major Equipment

1 Deptt. of Applied Physics 110 laser Set up

Meldes exp

Applied Magnetic field set up

LCR meter

Sciences CRO

Optical fibre Apparatus

and

Dielectic constant kit

188

Humanities

189

Microwave Guide Setup

Zener Diode Kits

Applied

Chemistry

195 Atomic absorption spectrophotometer

Gas Chromatograph, Piccometer

Particle Size analyzer, Optical microscope

LCD Projector

Podium, TV, VCD etc.

Muffle Furnace

Flash point App.

Hot air oven

Viscosity meter

Distiliation plant

Applied 180 Water bath

Glassware etc.

Chemistry

Research

Comm. Skill

Lab.

146

Computer system

Language lab Software

P A System

Research (App.

Physics)

150 High Precision Balance

Simultaneous Thermal Analyzer System

(DTA/TGA/DTG)

Fiber optic & data transfer lab module

Tensile testing madrive

Fringe Capture Michelson Interferometer with CCD

balance.

Nano Volt meter

2. B. Tech.

Chemical

Engg.

Chemical

Reaction Lab.

86.5 a. Continuous Stirred Tank Reactor

b. Isothermal Plug Flow Reactor

c. Semi Batch Reactor

d. Cascade Continuous Stirred Tank Reactor

e. RTD Studies in Continuous Stirred Tank Reactor

f. RTD Studies in Packed Bed Reactor

g. Dhona Balance

h. Air Compressor

i. Oven

j. Dhona Balance

Heat Transfer

Lab.

190 a. Heat Transfer through lagged Pipe.

b. Emissivity Measurement Apparatus

c. Parallel/ Counter Flow Heat Exchanger

d. Heat Pipe Demonstrator

e. Critical Radius of Insulating material

g. PIN-FIN in Natural & Forced Convection

h. Measurement of Thermal Conductivity of

insulating material in slab form by guarded hot

plate method.

190

i. Vertical Condenser

j. Unsteady State of Heat Transfer Apparatus

k. finned Tube Heat Exchanger

l. Drop Wise- film wise condensation Apparatus

m. Shall & Tube heat Exchanger

Fluid & Particle

Mechanics Lab.

190 a. Plate & Frame Filter Press

b. Close Circuit variable Speed Centrifugal Pump

c.Fluidized Bed

d. Gear Pump Test Rig

e. Flow Through non Circular Pipes

f. Equivalent Length of Pipes & Fittings

g. Apparatus for determination of losses in pipe

lines, due to sudden contraction , sudden

enlargement, Contraction, bends & elbows

h. Cyclone Separator

i. Sedimentation Apparatus

Mass Transfer

Lab.

86.5 a. Rotary Drier

b. Batch Crystallizer

c. Sieve Tray/ Plate Tray Distillation Column

d. Liquid- Liquid Extraction

e. Gaseous Diffusion Coefficient

f. Natural Draft Tray Drier

g. Wetted Wall Column

h. HETP Apparatus

i. Rayleigh Equation Batch Distillation Apparatus

191

j. Liquid Hold Up Packed Column set up

k. Abbe Refractometer (02 Nos. )

l. Dhona Balance

m. Fully automated binary Distillation column

n. Electrical weighing balance

Process

Instrumentation

Dynamics &

Control Lab

108 a. Cascaded Level Flow Trainer

b. Pneumatic P-I, Controller

c. Control Valve Characteristics

d. Shell & Tube Heat Exchanger

( Computerized )

e. PLC trainer

f. Interacting Liquid Level Tank Dynamics

g. Liquid Level Tank Dynamics

h. Dynamics of

Chemical Tech.

Lab.

130 a. Bomb Calorimeter

b. Weighing Balance Analytical

c. Electronic Weighing Balance

d. Muffle Furnace

e. COD Measuring Apparatus

f. pH Meter

g. DO Meter

h. TDS & Conductivity Meter

i. Tensile Testing Machine

j. Two Roll Mill

k. Injection Moulding machine

192

193

l. Compression Moulding machine

Computation

lab

200

Computers, Multimedia projector, 5KVA UPS

3. B. Tech.

Electrical

Engg.

C.A.P.S.A. LAB

1. Computer Systems P4 With 1 GB RAM 5No

2. Computer Chairs 35 Nos

3. UPS ONLine 5Kva one Hour backup

CONTROL &

INSTRUMENTA

TION LAB

1. AC Position Servo System

2. Pressure Transducer

3. Electromagnetic Transducer

4 PID Controller,

CONTROL

SYSTEMS

USING MATLAB

1. LCD Computer Projector

2. Computer System IBM With 512 RAM 10 Nos

3. UPS ONLine 5Kva one Hour backup

ELECTRICAL

MACHINE-1

1. DC Motors

2. DC Motor Gen. Set.

3. Regulatted DC Power Supply

4. AC Motor DC Gen.

1. Slipring Motor DC Gen.

194

ELECTRICAL

MACHINE-2

2. Two Motor Set.

3. DC Motor Alternator.

4. Syn. Motor DC Gen.

EMMI

1. CRO

2. Function Generator

3. Anderson Bridge.

4. Wein Bridge

5. Potention Meter

6. LVDT

POWER

ELECTRONICS

1. Microprocessor Based Firing Control Kit

2. Jones Chopper Kit

3. Single Phase SCR Kit.

4. UJT

105.38

1. Computer System IBM

With 512 RAM 10 Nos

2. Computer Systems P4

Lenovo With 1 GB RAM

5No 3. Computer Systems

IBM P4 Lenovo With 512

RAM 15nos 4. Computer

System i5 HP 10 Nos

5.Laser Printer Lazer jet HP

1108 6.UPS ONline 5Kva 3

n 7.Computer Chairs 35 No

8. L.C.D. Computer

Projector 9. Matlab Software

R 2012 b(10 User) 10. Etape

Software 12.5 (5 User)

195

POWER

SYSTEM

DESIGN LAB

BEEE Lab

105.38

1. Single phase T/F 2.Three

Phase T/F 3.Watt meter

.4.Voltmeter.5. Ammeter 6.

Diode Characteristics kits 7.

Transistor Characteristics

kits 8. Digital IC Trainer

Kits

196

Microcontroller

Lab

197

ARM7 Microcintrollers,Microcontroller

4. B. Tech.

Electronics

&

Communicat

ion Engg.

AIC/Linear

Integrated &

Circuit Lab

102 Integrated Circuits Kits,CROs,Function

generators,Power Supplies,DMMs

NED/EDC Lab 102 Basic Electronics Kits, CROs,Function


Analog

Electronics

/ Applied

Electronics

Lab

102

Amplifier kits, Oscillators Kits, CROs, Function


Microwave

Lab

102 Microwave Trainers,Klystron & Gun Diode based

Microprocessor

/

102 Basic Educational Microprocessor Kits (8085 &

8086),Universal Programmer,a wide range of

Interface Cards,Microcontroller kits,PIC ,AVR &

Programme H/W Tools

Analog &

Digital

Communicatio

n Lab

102 Communication Trainers,CROs, Function

Generators,Digital Strorage Oscilloscopes,Audio

Frequency Generators

VLSI/ DSP Lab 102 30 IBM P-IV Computers,

Software:

COMMSIM,

PSPICE 9.1,

MATLAB- R2006a,

Active HDL 6.3 PE.

Tanner Tool

Digital

Electronics /

DCLD lab

102 Digital Electronics Trainer like as ,FF

Trainers,Adders,MUX,DEMUX,ALU,ENcoders,Dec

oders Tainers

198

5. B. Tech.

Mechanical

&

Production

Engg.

Thermal

Engg. Lab

141.92 1. Computerized Two Cylinder four stroke diesel engine

test rig.

2. Two stage Reciprocating air compressor test rig.

3. Various Components of Engine

4. Models of Various Types of Boilers

5. Cut section Model of Two & Four stroke diesel

engine.

Three cylinder four stroke petrol engine test rig 6. with

hydraulic dynamometer 7. Cut section model of two

stroke & four stroke petrol engine.

Automobile

Engg. Lab.

141.92 1. Old Ambassador car.

Various Parts of an automobile like gear boxes, 2. clutch,

Steering system, Braking system, cooling system etc.

3. Valve refacing M/c.

CAD Lab 141.92 Hardware

1. Forty Computer System with UPS

2. One Laser printer

3. Two Dot- Matrix Printer

4. Plotter, 5 server,6 scanner

5. 5 no. U.P.S 5 KVA capacity

6. External Hard Disc.

Software

Inventor 10.0 & Auto CAD 2006

199

An sys software (32 Seats)

Refrigeration 141.92 1. Ice Plant Tutor

2. Vapor Compression Test Rig

& Air

3. Window Type Air conditioning Test Rig.

Conditioning

4. Gas Charging Unit.

5. Cut Section Models of Various components of Ref.

Lab. & Air Lab.

Industrial.

Automation &

Robotics Lab.

141.92 1. Pneumatic Trainer

2. Hydraulic Trainer

3. Pneumatic Stamping M/c

T.O.M. Lab. 141.92 1. Journal Bearing apparatus

2. Different types of Governors apparatus

3. Gyroscope apparatus.

4. Balancing of masses apparatus.

5. Different type of models of various links &

Mechanisms.(45 No.)

S.O.M. Lab. 107.52 1. Universal Testing Machine

2. Torsion Testing Machine

3. Impact Testing Machine

4. Spring Testing Machine

5. Hardness Testing Machine

Engineering

Material &

Metallurgy

141.92 1. Metallurgical Microscope

2. Specimen cutting Machine

3. Bench Grinder

200

4. Polishing Machine

5. Belt Grinder

6.Precision Balance

7 Micro Hardness tester

8. Temp. controlled Silicone Carbide Tube Furnace

9. Hot Mounting Apparatus

10. Cold Mounting Apparatus

11. D.C. Regulated Power Supply

12. Image Analyser

13. Air Jet Erosion Tester

M.P.-I 141.92 1. Sieve Shaker

2. Sand weighing Scale

3. Drying Oven

4. Mould Hardness Teser

201

5. Calibration unit Fas

6. Sand Rammer

7. Moisture Tester

8. Sand Surface Tester

9. Spot welding M/c Project

10. Tig welding machine

11. SAW welding machine

12. Mig welding machine

Manufacturi

ng Process

Lab-II

141.92 1. Electro Discharge M/c

2. Solid works 3D Software

3. CNC Mill Trainer(Techno fort)

N.D.T. Lab. 33.60 1. Ultasonic Crack Detector

2. Ultrasonic Coating Thickness Gauge

3. Ultrasonic Thickness Gauge

4. Magnetic Crack Detector

M/c Drawing,

& Engg.

Graphics Drg.

915.48

Fluid

Mechanics

Lab.

141.92 1. Be oulli s theo e apparatus

Flow measurement of venture meter and orifice 2. meter.

3. Pipe friction apparatus.

4. Orifice and mouthpiece apparatus.

5. Flow over a notch apparatus.

202

6. losses in pipe fitting apparatus.

7. Laminar & Turbulent flow apparatus.

8. Pitot tube apparatus.

9. Metacentric height apparatus.

10. Computer system

Metrology & 141.92 1. Tool Makers Microscope

2. Vernier Height Gauge

Mech.

3. Different types of micrometers.

Measurement

4. Sine bar.

Lab.

5. Slip gauges box set.

6. Granite surface plate.

7. Bench centre apparatus.

8. Box angle plate.

9. Magnetic V- Block.

Va ious t pes of dial indicators.

11. Vernier calipers

12. Angle plate.

13 Potentiometers

14. LVDT Tutors.

15. Transducer.

16. Strain gauges.

17. Load cells.

18. Computer System.

Mechanical 141.92 Universal Vibration Laboratory

203

Vibration

Laboratory

Mechanical

Vibration

Laboratory

141.92 Universal Vibration Laboratory

Fluid 141.92 1.Hydraulic Ram

2. Reciprocating Pump

Machinery

3. Rotary Pump

Lab

4 .Pelton Wheel Turbine(Test Rig)

5. Models of:

204

Pelton Wheel Turbine

Kaplan Turbine

Francis Turbine

Non -Conv-

Energy

Lontorn and Solor 1. Solor Pannel

6.

B. Tech.

Computer

Science

& Engineering

RDBMS Lab

153.28 sq.

mtr

Computer,UPS, Networking Switch

Networking Lab

106.65 sq.

mtr.


Computational

Lab

106.65 sq.

mtr.


Major Project

Lab

106.65 sq.

mtr.


7.

Computer

Application

Computer Lab

Approx 98

sq m.

Desktop computer systems , i3 processor , 4GB 1. RAM

(30

systems)

2. Laser printer = 2 nos

3. Dot Matrix Printer = 2 nos

4. UPS 5 KVA = 3 nos

205

B.Tech. Civil

8

Engg.

206

Structural

Analysis Lab.

66

1. Apparatus For Verification Of Clerk'S Maxwell

Reciprocal Theorem

2 Elastic Properties Of Deflected Beam . Apparatus

3 Continuous Beam . Apparatus

4 Behavior Of Column And Struts . Apparatus

5 Three Hinged Arch . Apparatus

6 Two Hinged Arch . Apparatus

7 Deflection Of Truss . Apparatus

8 . Redundant Joint Apparatus

9 . Curved Member Apparatus

10. Unsymmetrical Bending Apparatus

Surveying Lab.

66

Planimeters

Thedolites, , Levelling Staff, Cross Staff,

Padometer

, Telescopic Adelade, Nautical Sextant,

Binocular

Su e e s Compass, s etc. complete

Surveying Equipments

Fluid

Mechanics-I

66

Common with Chemical Engg. Deptt.

Lab.

Strength of

Materials Lab.

66

Common with Mechanical Engg. Deptt.

Concrete

Technology Lab.

66

Under Progress, some items are to be purchased under

TEQIP.

207

(ii) LIST OF EQUIPMENT IN COMPUTATIONAL LAB

Sr.No. Specifications Qty

1

Intel P-IV (with combo) , 3 Ghz, 530 processor, 512 MB RAM DDR2, 80

GB HDD, . MB FDD ith IBM o ito ith i do s XP-2

15

2

P3- Mhz, GB HDD, MB RAM, Mo ito ith Wi do s

2000 Professional

20

3 Printer Dot Matrix HQ-1070+ DX 05

4 Scanner HP Scanjet 2400 01

5 5 KVA UPS online 04

(iii) LIST OF HARDWARE IN NETWORKING LAB

S.No Specification of Hardware Quantity

1

IBM Computers, IBM Think center,820 Dual

core, 2.8 FGHZ,2x1 MB L2 CACHE

MHZ,with INTEL EM 64T,945 GG

15

208

CHIPSET,512 MB RAM,160 GB HDD1.44

209

MB FDD,key board, optical scroll mouse,

With IBM olou o ito

2

IBM Computers, IBM Think center,820 Dual

core, 2.8 FGHZ,2x1 MB L2 CACHE

MHZ,with INTEL EM 64T,945 GG

CHIPSET,1GB RAM,160 GB HDD1.44 MB

FDD,key board, optical scroll mouse,

With IBM olou o ito

05

3

P3- Mhz, GB HDD, MB RAM,

Monitor with Windows 2000 Professional

10

4 IBM SERVER 01

5 Data Projector,(VPL,EX3/WT ,SONY) 01

6

Dot Matrix Printer, No of pins24 cps at 10

cpi,300, port

04

7

Laser Printer, Type mono Resolution in dpi

600x600 with speed 14 ppm

01

210

8 5 kva UPS online 02

Sr. No. Course/Branch

Name

Laboratory Carpet

Area (in sq.

m.)

Details of Major

Equipment

1

MCA

Comp. Lab-I

80

Desktop Computers,

Printers etc.

2

MCA

Comp. Lab-II

66

Desktop Computers,

Printers etc.

3

MCA

Comp. Lab-III

80

Desktop Computers,

Printers etc.

4

BCA

Comp. Lab-IV

108

Desktop Computers,

Printers etc.

5

MCA

Comp. Lab-V

80

Desktop Computers,

Printers etc.

6

BCA

Comp. Lab-VI

66

Desktop Computers,

Printers etc.

211

(B) CENTRAL WORKSHOP

WELDING SHOP

Sr.

No.

Name of Equipment/Machine

Quantity

Approx.

Cost( Rs.)

Amount(Rs.)

1 AC Transformer Welding set, I/II Phase, oil cooled 02 - 26082.00

2 Spot Welding Machine (Foot Operated) 01 - 32466.00

3 Pedestal Grinder ,Double Ended Grinding Wheel III

Phase

01

-

18000.00

4 Be h D illi g Ma hi e ¾ Cap 01 - 10869.00

5 AC Arc Welding Transformer, III Phase, Oil Cooled 01 - 30000.00

6 Anvil 50Kg 01 - 1250.00

7 Adjustable Wrench 01 - 68.30

8 Gloves (leather) 02Pair - 120.00

9 Be h Vi e Ape 08 - 14950.00

10 Be h Vi e Ra Bhaj 02 - 1732.00

11 File Half Round 01 - 99.00

12 Hacksaw Frame 12 - 390.00

13 Ball Peen Hammer 800gm 01 - 137.10

14 Gas Welding Blow Pipe set 01 - 1895.00

15 Measuring Tape 2mtr 01 - 25.00

16 Oxygen Regulator, Double Stage 10*63B 02 - 3009.00

17 Pipe W e h 01 - 209

212

18 Plier Combination 150mm 01 - 45.00

19 Safety Goggles 02 - 140.00

20 Steel S ale 02 - 92.00

21 To g 02 - 490.00

22 Try Square 150mm 04 - 98.80

23 Electrode Holder Heavy Duty 600Amp 03 - 570.00

24 Welding Screen Hand 06 - 495.00

25 Welding Screen Head 02 - 320.00

26 Acetylene Regulator Double Stage 02 - 2932.50

27 Chipping Hammer 02 - 56.00

28 Cylinder Valve Key 01 - 20.00

29 Cutting Blow Pipe 01 - 1895.50

30 Center Punch 02 - 47.50


32 Chisel 150mm 03 - 123.00

33 Screw Driver 150mm 02 - 54.50

34 Oxygen Cylinder Seamless( 15.4kgf/sqcm) 02 - 9000.00

35 C2H2 Cylinder Empty Seamless (1kgf/sqcm) 02 - 9000.00

36 File Flat 300mm 02 - 130.00

37 File Flat 300mm 04 - 368.00

38 File Flat 300mm Smooth 10 - 920.00

39 File Flat 300mm Bastard 10 - 920.00

40 Oil Can Steel (Plunger Type) 01 - 38.00

41 Number Set 8mm (0-9) 01 - 144.00

213

BLACK SMITHY SHOP

Sr.

No.


Quantity

Approx.

Cost( Rs.)

Amount(Rs. )

1 Spring Forge Hammer (25-40mm, Blow 300/min, 50kg) 01 - 123967.00

2 Black Smith Open Hearth Furnace 05 - 129602.00

3 S ith s Ha e g 06 - 684.00

4 Sledge Hammer 500gm 06 - 684.00

5 Straight Peen Hammer 06 - 684.00

6 Cross Peen Hammer 06 - 684.00

7 Anvil made of steel with CI stand (100kg) 06 - 57870

8 S age Blo k ade of Steel kg 04 - 35580.00

9 Hollow Bit Tong V shape, length 400mm 20 - 4380.00

10 Tong suitable to Grip between two sections 400mm 20 - 4380.00

11 Hollow Bit Tong to Grip bet Round & Square bars(400mm) 20 - 4380.00

12 Pick-Up Tong ( 400mm) 20 - 4900.00

13 Chisel Tong (425mm) 20 - 4900.00

14 Double faced sledge Hammer ( 5000gm) 20 - 9960.00

15 Square Clip Tong (450mm) 20 - 5000.00

16 Duck Net Tong (425mm) 20 - 5000.00

17 Hoops Tong (400mm) 20 - 5000.00

18 Angle Tong (400mm) 20 - 5000.00

19 Link Tong (450mm) 20 - 5000.00

20 T-Angle Tong (450mm) 20 - 5000.00

21 Shingling Tong (400mm) 20 - 5000.00

214

22 Pipe Holding Tong (450mm) 20 - 5000.00

23 Anvil Tong (450mm) 20 - 5000.00

24 Rivet Tong (450mm) 20 - 5000.00

25 Chisel (300mm) 20 - 2980.00

26 Hard die (STD) 20 - 3620.00

27 Ganges (STD) 20 - 3880.00

28 Cold-Chisel (100mm) 20 - 1280.00

29 Hot Chisel High Carbon Steel(Tip Angle 30) 20 - 3960.00

30 Cape Chisel , Narrow Cutting Edge(Tip Angle 45) 20 - 5740.00

31 Gauge Chisel (Radius-1,1.5, 2, 2.5mm)-20set 20 - 3960.00

32 Flatters (75mm) 06 set - 5904.00

33 Set Hammer 2Kg 10 - 2940.00

34 Hand Hammer(1Kg) 20 - 3280.00

35 Fullers(0.5Kg) 04set - 7776.00

36 Swage(STD) 04set - 8976.00

37 Bastard Swage(STD) 10 - 1340.00

38 Punch and Drift(STD) 20 - 4160.00

39 T S ua e 02 300.00 -

40 Steel S ale 01 15.00 -

41 Be h Vi e 04 1200.00 -

42 Number Punch Set 01 150.00 -

43 Tool Bit ¼ 01 50.00 -

44 Steel Foot Rule 01 30.00 -

45 Sledge Hammer 10Kg 05 2500.00 -

46 Sledge Hammer 500gm 04 200.00 -

215

ELECTRICAL & ELECTRONICS SHOP

Sr.

No.


Quantity

Approx.

Cost( Rs.)

Amount(Rs.)

1 ½ Brest Drill m/c Hand 02 - 430.00

2 ¼ Brest Drill m/c Hand 01 - 75.00

3 Hammer 200gm 04 - 192.00

4 Nose Plier Long 08 - 400.00

5 Steel S ale 05 - 75.00

6 Hand Saw 01 - 50.00

7 Measuring Tape (3mtr) 01 - 40.00

8 Pi e 01 - 20.00

9 Flat Nose Plier 08 - 440.00

10 Test Pin 04 - 60.00

11 Try Square 300mm 02 - 218.00

12 Claw Hammer 250gm 02 - 100.00

13 Claw Hammer 500gm 01 - 50.00

14 Bench Vice 150mm 04 - 7480.00

15 S e D i e 10 - 180.00

16 S e D i e 10 - 200.00

17 S e D i e 10 - 220.00

18 Room Heater 02 - 310.00

19 Soldering Iron 35Watt 02 - 80.00

20 Basta d File 04 200.00

21 Energy Meter 01 - 520.00

216

22 Key Hole Saw Seat 3 01 - 24.00

23 Girmet Set 01 - 12.00

24 Flat File 02 - 70.00

25 SWG 04 600.00 -

26 Multi-meter (426 360TR) 02 700.00 -

27 Side Cutting Plier 02 100.00 -

28 2HP Motor 01 2800.00 -

29 Coil Winding Machine 02 8000.00 -

30 D.OL Starter 01 400.00 -

31 Poker 02 30.00 -

32 Proto cure PCB Curing Machine(Oven) 01 - 12000.00

33 Photo resist Dip Coating Machine 01 - 23000.00

34 PCB Etching Machine 01 - 23750.00

35 PCB Shearing Machine Slash300 01 - 12000.00

36 Roller Tinning Machine-10 01 - 33000.00

37 PCB Art Work Film maker 01 - 9100.00

38 Double sided UV exposure unit 01 - 33900.00

39 PCB Drilling Machine 01 - 14700.00

217

SHEET METAL SHOP

Sr.

No.


Quantity

Approx.

Cost( Rs.)

Amount(Rs.)

1 Hand Grooving Machine 01 - 2800.00

2 Bench Polishing Machine 01 - 11330.00

3 Tapping Machine 01 - 16021.00

4 Bench Grinder Wheel 150*20 01 - 2856.00

5 Circle Cutting Machine 01 - 6750.00

6 Edge Folding Machine 01 - 2235.00

7 Fly Press Hand Operated 01 - 3360.00

8 Hand Lever Shear 01 - 1920.00

9 Plate Bending Roll 01 - 49500.00

10 Power Press, Pillar Type 01 - 36300.00

11 Pyramid Type Roll 01 - 46200.00

12 Pipe Bending Machine 01 - 9474.00

13 Shearing Machine 01 - 20720.00

14 Foot Shearing Machine 01 - 20820.00

15 Try Square 05 - 123.50

16 Tap Set 10mm 01 - 174.00

17 Tap Set 12mm 01 - 259.00

18 Ti Cutte S ip 02 - 90.00

19 Ti Cutte Shea 02 - 220.00

20 Ti Cutte S ip 02 - 220.00

21 Odd Leg Calipe 03 - 70.00

218

22 Ce te Pu h 06 - 328.00

23 Chisel 05 - 370.00

24 Chisel 04 - 164.00

25 S ua e File 03 - 72.00

26 Flat File 07 - 224.00

27 Hand Grover 03 - 5622.00

28 Ri et Set ¼ 04 - 145.00

29 Bick Iron Stake 02 - 550.00

30 Hatched Stake 02 - 550.00

31 Horse Stake 02 - 550.00

32 S e D i e 04 - 160.00

33 S e D i e 01 - 66.00

34 Scriber 01 - 22.00

35 Anvil 50Kg 02 - 1250.00

36 Anvil25Kg 01 - 600.00

37 Be h Vi e 10 - 1870.00

38 Outside Caliper 01 - 12.00

39 Inside Caliper 01 - 22.00

40 Di ide 04 - 41.00

41 Hand Drilling Machine 6mm 01 - 3040.00

42 Flat File 12 - 1308.00

43 Hacksaw Frame(Fixed) 01 - 28.50

44 Ball Peen Hammer800gm 04 - 448.40

45 Ball Peen HJammer200gm 03 - 145.80

46 Cross Peen Hammer800gm 02 - 274.20

219

47 Cross Peen Hammer 200gm 03 - 145.80

48 Feeler Gauge 01 100.00 -

49 St aight Edge 02 - 280.00

50 Straight Edge 2mtr 01 - 2350.00

220

`51 Plastic Hammer 01 - 65.00

52 Measuring Tape 01 - 40.00

53 Needle File 01 - 60.00

54 Ring Spanner 01 - 741.90

55 Steel S ale 05 - 230.00

56 Steel Scale 1000mm 05 - 1250.00

57 Combination Plier 01 - 91.00

58 Square Face Hammer 05 - 147.50

CARPENTRY SHOP

Sr.

No.


Quantity

Approx.

Cost( Rs.)

Amount(Rs.)

1 Adze 05 - 325.00

2 Ba Cla p 05 - 1533.00

3 Be h Vi e 05 - 4330.00

4 Outside Calipe 01 - 12.00

5 Fi e Chisel 05 - 252.00

6 Fi e Chisel ½ 04 60.00 -

7 Fi e Chisel ¾ 04 100.00 -

8 Fi e Chisel / 04 100.00 -

9 Fi e Chisel / 04 125.00 -

10 Mo tise Chisel ½ 12 250.00 -

11 Mo tise Chisel 04 100.00 -

12 Mo tise Chisel ¼ 04 60.00 -

13 Mo tise Chisel / 04 80.00 -

14 Mortise Chisel / 04 100.00 -

221

15 Ca pe te s Vi e 10 - 8800.00

16 Ca pe te s Vi e 08 - 6000.00

17 Claw Hammer 250gm 04 - 100.00



20 Cross Peen Hammer 800gm 02 - 274.00

21 Cross Peen Hammer 100gm 01 20.00 -

22 Sledge Hammer 500gm 01 - 87.00

23 Compass Saw 250mm 06 - 132.00

24 Hand Saw 500mm 05 - 250.00

25 Cross Cut Saw 02 150.00 -

26 Rip Saw 17 600.00 -

27 Key Hole Saw 05 - 120.00

28 Tenon Saw 05 - 120.00

29 Dovetail Saw 06 - 144.00

30 Di ide 01 - 16.00

31 Duplex Babbitt Plane 02 - 830.00

32 Block Plane 05 - 415.00

33 Plough Plane 02 - 1250.00

34 Spoke Sha e 06 - 306.00

35 Ja k Pla e 04 - 616.00

36 Ja k Pla e 10 - 3080.00

37 Flat File 300mm 07 - 425.00

38 Wood Rasp 03 - 75.00

39 Wood Rasp 03 - 70.00

222

40 Rou d File 02 - 84.00

41 Half Rou d File 03 - 390.00

223

42 Flat File 02 - 70.50

43 Gauge Set outside 02 - 768.00

44 Gauge Set inside 02 - 776.00

45 Girmet 10mm 05 - 60.00

46 Folding Rule 600mm 06 - 120.00

47 Saw set 01 - 40.00

48 Oil Can 01 - 35.00

49 Plier 250mm 01 - 48.30

50 Pi e 01 - 46.70

51 Pi e 03 - 60.00

52 Oil Stone 04 - 295.00

53 Mortise Gauge (Wood) 04 - 208.00

54 Mortise Gauge(Alm) 06 200.00 -

55 S e D i e 01 - 66.40

56 S ale Steel 03 - 90.00

57 Ratchet Brace 04 - 320.00

58 Measuring Tape 02 - 65.00

59 T S ua e 02 - 72.00

60 T S ua e 07 - 168.00

61 C Cla p 10 - 500.00

62 Chisel 150mm 03 - 111.00

63 Zig Saw Machine 01 - 13944.00

64 Wood Turning Lathe 01 - 16300.00

65 Universal Wood Machine 01 - 46741.00

66 Bench Grinder 01 - 6340.00

MACHINE SHOP

S.N. Name of Equipment/Machine Quantity Approx.

Cost( Rs.)

Amount(Rs.)

1 Bench Grinder 01 - 3844.00

224

2 Engraving Machine 01 - 124075.00

3 Super Price Lathe Machine 1330/600 05 - 567605.00

4 HMT Lathe Machine-LB-17/1000 Center Lathe 05 - 1289632.00

5 Milling Machine Horizontal 1070*230mm 01 - 127300.00

6 HMT Universal Milling Machine FN-1U 01 - 499586.00

7 Power Hack Saw- Hydraulic Capacity 200mm 01 - 18800.00

8 Pedestal Grinder 300*50mm 01 - 18000.00

9 Planning Machine -Stroke Length 1200mm 01 - 117424.00

10 HMT Radial Drilling Machine-RM62 01 - 424016.00

11 Shaping Machine Super Model RPS-300mm 02 - 156980.00

12 HMT Universal Tool & Cutter Grinder (GTC28T) 01 - 397990.00

13 Vernier Depth Gauge SS 0.02mm, 0-200mm 02 - 10300.00

14 Vernier Height Gauge 0.02mm,0-300mm 01 - 14090.00

15 Screw Pitch Gauge 02 - 180.00

16 Micrometer outside SS 0.01mm, 0-25mm 01 - 2674.00

17 Surface Plate CI 600*600mm 01 - 5930.00

18 Vernier Caliper 4 way, 0-150mm 03 - 5700.00

19 Dial Test Indicator 01set 2500.00 -

20 Radius Gauge 01set 100.00 -

21 Be h Vi e 05 - 5334.00

22 Outside Calipe 12 - 273.00

23 I side Calipe 06 - 159.25

24 Drill Bit 20mm HSS Taper Shank 01 300.00 -

225

25 Die ½ BSW 01 - 120.00

26 Die Handle (Die Stock) 01 - 45.00

27 File Flat 300mm 09 - 540.00

28 Hack Saw Frame (Fixed) 03 - 97.50


30 Knurling Tool 05 - 930.00

31 Oil Pump 01 - 305.00

32 Magnetic V Block 01Pair - 38.44

33 Plier Combination 150mm 02 - 96.60

34 Spanner Set DE (6Piece Set) 02set - 613.00

35 Measure – 5Ltr 01 - 98.00

36 Surface Gauge 04 - 600.00

37 Steel S ale 05 - 150.00

38 Steel S ale 02 - 30.00

39 Tap Ha dle / 01 - 91.35

40 Try Square 300mm 01 - 54.60

41 Tap Set / 01 - 60.00

42 Tap Set M14 01 - 334.00

43 Tap Set M16 01 - 394.00

44 Angle Plate 01 - 1025.00

45 Odd Leg Caliper 02 - 140.00


47 Chisel 01 - 37.00

48 Convex Milling Cutter 02 - 3800.00

49 Concave Milling Cutter 02 - 5188.00

50 End Mill Cutter 20mm 06 2400.00 -

51 End Mill Cutter 16mm 10 2500.00 -

52 Drill Chuck 0-12mm 01 - 260.00

53 Drill Chuck 0-13mm 05 - 2650.00

54 Drill Bit 40mm Taper Shank 02 - 4790.00

55 Drill Bit 50mm Taper Shank 02 - 73.84

226

56 Drill Bit 13.5mm 01 - 187.00

57 D ill Bit / 01 - 199.00

58 Drill Bit 30mm 02 - 2010.00

59 Gear Milling Cutter 1.5 Module 02set - 14350.00

60 Gear Milling Cutter 1 Module 02set - 12506.00

61 Letter Punch 8mm 01set - 315.00

62 Parallel Bar 20*50*150mm 01 - 1445.00

63 Parallel Bar 25*25*150mm 04 - 4780.00

64 Reduction Sleeve 01set - 544.00

65 Shell Ed Mill 100*45*32mm 02 - 10232.00

66 Staggered Teeth Side & Face Mill Cutter 100*25*32mm 02 - 7772.80

67 Screw Driver Tester Kit 01 - 93.00

68 Double Angle Cutter Symmetrical 04 - 7728.00

69 Plane metal slitting saw cutter 04 - 3360.00

70 Side & Face Milling Cutter 50*10*22mm 03 - 2983.00

71 Staggered teeth slitting Saw cutter 04 - 3360.00

72 Allen Key 5,6,7,8,9,10 &12mm 01set - 426.00

73 Drill Chuck 0-25mm 02set 2000.00 -

74 Gear Milling Cutter 2 Module 01 9700.00 -

75 Double angle cutter unequal 63*22*20mm 01 4200.00 -

76 Key Way Milling Cutter St Teeth 63*22*10mm 03 5700.00 -

77 T slot Cutter (Staggered Teeth 18*32*14mm) 03 7000.00 -

227

78 Single Corner Rounding Cutter 63*22*08mm 02 7000.00 -

79 Single Angle Cutter 63*22*18mm, 60 degree 02 7000.00 -

FOUNDRY SHOP

Sr.

No.


Quantity

Approx.

Cost( Rs.)

Amount(Rs.)

1 Pit Furnace with Blower 50 Kg capacity of Crucible 01 - 43383-00

2 Rapid Moisture Tester 01 - 4800-00

3 Sand Rammer 01 - 6960-00

4 Permeability Meter 01 - 9600-00

5 Universal Sand Strength m/c (Complete) 01 - 21600-00

6 Plate form weighing balance cap. 400gm 01 - 6942-00

7 A) mould hardness Tester, B) Core Hardness Tester 01 - 11830-00

8 Shovels 02 - 298-00

9 Tools Kit Std (Foundry) 05 - 15178-00

10 Below Hand Operated 05 - 15178-00

11 Portable Grinder 01 - 7850-00

12 Hand riddles 02 - 788-00

13 Strike of bar MS 05 - 1470-00

14 Vent wire 3mm diameter 05 - 270-00

15 Draw Spike 05 - 370-00

16 Draw Screw & wrapping plate 05 - 2420-00

17 Wooden Mallet with Handle 05 - 240.00

18 Sprue Pin 05 - 120.00

19 Sprue/Gate Cutter 05 - 190.00

228

20 Gaggers 05 - 180.00

21 Clamp with Wedges 05 - 1470.00

22 Vent Wire 10 - 80.00

23 Moulding Box 10set 2000.00 -

24 Open Type Flask 02set - 1788.00

25 Ladle, Hand Shank with Handle 02 - 4688.00

26 Crucible 02 - 1968.00

27 Chisel 150mm 05 - 370.00

28 Magnet Yoke Set 02 - 1948.00

29 S e D i e 01 50.00 -

30 Claw Hammer 01 50.00 -

31 Rasp File 01 75.00 --

32 Bench Vice 01 500.00 -

33 Sand Muller 100Kg Complete with Motor & Starter 01 - 30249.00

34 Hand Rammer 10 - 1540.00

35 Floor Rammer 10 - 1540.00

36 Peen Hammer 10 - 1540.00

229

FITTING SHOP

Sr.

No


Quantity

Approx.

Cost( Rs.)

Amount(Rs. )

1 Anvil -50Kg 01 No - 1250-00

2 Adjustable wrench 03 Nos. - 204-00

3 Angle Plate 125X150X200 01 No. - 1025-00

4 Be h i e Ra has 15 No - 12990-00

5 Be h i e ape 08 No - 14960-00

6 Box spanner 10 mm 05 No 175-00 -

7 Box spanner 6x7 mm 02 No 70 -

8 Co i atio set 01 No - 7550-00

9 Calipers outside 03 No - 36-00

10 Caliper inside 02 - 45-50

11 Calipe odd pleg Ri eted 01 - 70-00

12 Centre punch 03 - 164-00

13 Chisel 150 mm long 03 - 111-00

14 Chisel 10 mm wide 01 - 80-00

15 Drill machine bench type 01 - 9990-00

16 Drill machine pillar type 01 45000-00 -

17 Vernier depth gauge 01 - 5150-00

18 Di ide sp i g 12 - 420-00

19 Di ide 04 - 180-00

20 Diamond file set 01 - 1600-00

21 File flat 300 mm 02 - 130-00

22 File flat 300 mm 30 - 180000

230

23 File flat 250mm 34 - 1198-50

24 File flat 150mm 15 - 480-00

25 File half round 200mm 10 - 1160-00

26 File half round 200mm 04 - 396-00

27 File half round 300mm 10 1250-00 -

28 File triangular 125mm 02 - 46-00



31 Needle file set 01 - 360-00

32 Needle file set (10 pcs) 04 - 1440-00

33 File square 200mm 02 - 144-00

34 File square 300mm 20 2500-00 -

35 File square 250mm 25 2500-00 -

36 File knife edge 250mm 01 150-00 150-00

37 File knife edge 150mm 01 105-00 --

38 File knife edge 250mm 09 - -

39 File knife edge 150mm 09 - 945-00

40 File hand 200mm 01 - 61

41 File round 300mm 30 3750-00 -

42 File round 200 mm 10 1000-00 -

43 Hand file 200mm 05 520-00 -

44 Hacksaw frame fixed 03 - 96-00

45 Hacksaw frame adjustable 10 - 470-00

231

46 Vernier height gauge 0-300mm 01 - 14090-00

47 Ball Peen hammer 200gm 01 - 48.60

48 Ball Peen hammer 800gm 01 - 137-00

49 Cross Peen hammer 200 gm 01 - 48-60

50 Micro meter out side 0-25mm 01 - 2670-00

51 Micro meter out side 25-50mm 01 - 2944-00

52 Magnetic v block 01 - 3844-00

53 Measuring tape 2 mtr. 01 - 25-00

54 Number punch set 01 - 90-00

55 Pedestal grinder 01 - 18000-0

56 Plier circlip external 175 mm 01 - 39-20

57 Plier combination 150 mm 01 - 91-00

58 Plier slip joint 150 mm 01 - 60-00

59 Plie Slip Joi ts 01 50.00 -

60 Plier Water Pipe 01 50.00 -

61 Pipe Vice, 0-112.5mm 01 - 1425.00

62 Scrapper Flat 05 500.00 -

63 Scraper Triangular 05 500.00 -

64 Radius Gauge Set 02 - 4660.00

65 Reduction Sleeve Set (5Pcs MT 1,2,3,4&5) 01 450.00 -

66 Ramba 01 15.00 -

67 Rip Saw 450mm 01 30.00 --

68 Reamer 10mm 01 100.00 -

69 Reamer Adjustable 8pcs/01set 02sets 1200.00 -

70 Screw Pitch Gauge 21 Blades metric 0.4-7mm 01 - 1200.00

71 Surface Plate 900*1200mm with Stand 01 - 34830.00

72 Socket Drill Chuck 02 100.00 -

73 Scale Steel 150mm 09 - 135.00

74 S e D i e o. 01 - 40.00

232

75 S e D i e o 01 - 66.40

76 Screw Driver 2in1(125mm) 02 - 88.00

77 Tap Ha dle / size 01 - 91.35

78 Tap Handle T type 01 30.00 -

79 Tap Set ½ BSW 01 - 90.00

80 Tap Set 6mm 01 80.00 -

81 Tap Set 10mm 01 110.00 -

82 Tap Set 12mm 02 - 318.00

83 Try square150mm(Hardened) 15 - 1275.00

84 Vernier Caliper 0-300mm 01 2500.00 -

85 Vernier Caliper 0-150mm with Fine Adjustment 02 - 3800.00

86 Wire Gauge 01 45.00 -

233

OPERATING SYSTEM SOFTWARE

1. SCO Open Server 2. Windows 7/8/10 3. Linux

APPLICATION SOFTWARE

12.. TNuorrbtoonCA+n+tivirus 2004 MS- Office 2017 MS-Visual Studio 2015

Fortinet Anti virus

Other Software’s :--

MATLAB VER 7.0

Package for PDE Tool Box

Optimization Tool Box

Control System Tool Box

Simulink, C++

Auto CAD 2006

Main Course Modules

Pro/Engineer Machining option, Pro/Engineer Die design

VR-CIM- (CIMS Simulation training software)

Hydrasim- (Hyd. Ckt. design s/w)

234

Library Facilities

Progress in this information age depends largely on frontline knowledge/information gained by

educationists, technologists, engineers and scientists and library plays a key role in dissemination of

information. The flood of literature, shrinking resources, escalation of prices has made it impossible to get all

information at individual level. So, at this stage, the library comes to the rescue to its users. Central library of

the Technical Campus has an adequate number of books to meet the present requirements of the students and

staff in the subjects and fields of the ongoing courses. Around 7600 titles, 30,000 text- books and reference

books, 53 International/ National Journals, 275 e-journals have been procures in various streams of science,

Engineering, Management & Humanities. For topical awakening of students and staff, it subscribes to 9 Local

and National Newspapers, 26 Serials/periodicals and covering all fields of Engineering and Management. It

also subscribes e-journals detail of which is as fallow. The central library has 1175 sqm of area.

Elseiver Engg. Plus Computer Science e-journals

ASME 26 e-journals plus back file from 2000.

IEEE all society periodicals package (ASPP) 146 e-journals back file to 2000.

Library is member of DELNET (Developing Library Networks). Book

Bank for SC/ST Students.

Air Conditioning reading halls.

Library is procuring books on regular basis also, it hold book display at regular interval.

Library having various section ,i.e. Reference Section ,Text Book Section, Book Bank Section, Circulation

Section, Newspaper, News Letter, Journals, Magazines Section, CD-ROM facility

Librarian Mr. Tej Pal Verma

Assistant Librarian Mrs. Indu Bala

235

Annexure – III

Classroom/ tutorial room teaching rooms facilities

236

Laboratory

237

Computer Center

238

Library

Cafeteria

239

Sports facilities

Gymnasium Facilities

240

241

Mandatory

Disclosure

(For the year 2017-18)

Submitted by

SHAHEED BHAGAT SINGH

STATE TECHNICAL CAMPUS

(POLYTECHNIC WING)

Moga Road, Ferozepur – 152004 242

Mandatory Disclosure

I. NAME OF THE INSTITUTION : SHAHEED BHAGAT SINGH COLLEGE

OF ENGINEERING & TECHNOLOGY

(POLYTECHNIC WING),

MOGA ROAD, FEROZEPUR – 152004.

Telephone No.: 01632 – 242138,

8288012050

Fax: 01632-242138

Email: [email protected],

[email protected]

II. NAME& ADDRESS OF THE DIRECTOR: DR. T.S. SIDHU

SHAHEED BHAGAT SINGH COLLEGE

OF ENGINEERING & TECHNOLOGY

(POLYTECHNIC WING),

MOGA ROAD, FEROZEPUR – 152004.

Telephone No.: 01632 – 242138,

8288012050

Fax: 01632-242138.

Email: [email protected],

[email protected]

III. NAME OF THE AFFILIATING BOARD: Punjab State Board of Technical

Education & Industrial Training,Punjab

243





IV. GOVERNANCE:

The college is run through Board of Governors (BOG). The constitution is as given below:

CONSITUTION OF BOARD OF GOVERNERS

SHAHEED BHAGAT SINGH STATE TECHNICAL CAMPUS, FEROZEPUR

1. Sh.Akhil Malhotra

CMD, Shivam Group, Ludhiana, Punjab

Chairman

2. Principa Secretary to the Government of Punjab

Department of Finance, Civil Secretariat, Chandigarh

Ex-Officio

Member


Department of Technical Education, Mini Secretariat, Sector-

9, Chandigarh

Ex-Officio

Member


Department of Science & Technology, Mini Secretariat,

Sector-9, Chandigarh

Ex-Officio

Member

5. Director

Department of Technical Education & Industrial Training,

Punjab, Sector-36A, Chandigarh

Ex-Officio

Member

6. Sh. Harpreet Singh

Member Legislative Asembly, Malout, Punjab

Member

7. Nominee

Ministry of Human Resource Development, 6 Raisana Road,

New Delhi-110001

Member

8. Nominee

All India Council for Technical Education, New Delhi

Member

9. Nominee

Institution of Engineers (India)

Member

10. Dr. Buta Singh

Dean Acadmics, IKG PTU Jalandhar, Punjab

Member

11. Professor B.D. Nathani

Ex-Principal, RSD College, Ferozepur City

Member

12. Sh. Kamal Sharma

Ferozepur, Punjab

Member

13. Vice Chancellor/Nominee

MRS PTU Bathinda

Member

14. Mr. Sameer Mittal

Director Finance, Bhagwati Lacto Veg Exports Pvt. Ltd.,

Member

244

Ferozepur Cantt

15. Sh. Narinder Singh

Director, Ishat Spinner Pvt. Ltd. Ludhiana

Member

16. Dr. (Mrs.) J kakaria (UGC Nominee)

Director Public Schools,DAV College Management

Committee, New Delhi-110055

Member

17. Chairman

Punjab State Board of Technical Education & Industrial

Training, Sector-36-A, Chandigarh

Ex-Officio

Member

18. Mr. Sukhwant Singh

Associate Professor, SBS State Technical Campus,

Ferozepur

Member

19. Dr. Rakesh Kumar

Associate Professor, SBS State Technical Campus,

Ferozepur

Member

20. Dr. T. S. Sidhu

Director, SBS State Technical Campus, Ferozepur

Member-

Secretary

Members of Academic Advisory Body: The College is affiliated with PunjabState

Board of Technical Education & Industrial Training and follows the programme as

recommended and approved by Board.

Frequency of the Board Meetings and Academic Advisory Body: TheCollege

is governed by the BOG. The Chairperson of BOG is Ex-officio Technical Education

Minister and majority of the members of BOG are Ex-officio of the Punjab Govt. as

shown in Table given on previous page.

245

Nature and Extent of involvement of faculty and students in academic affairs / improvements:

ACADEMIC COUNCIL (Faculty) of SBSCET, Ferozepur

Mrs Anuradha Rani, Lecturer Principal – Poly Wing

Mr. Ajay Singla (Lecturer) ECE Dean Academics – Poly Wing

Mrs Richa Sawhney Academic Incharge CSE

Mr Manpreet Singh Academic Incharge ECE

Mr Rajesh Kumar Academic Incharge EE

Mr Kamal Khanna Academic Incharge ME

Mr. Parminder Pal singh, F/I Central Workshop Member

Mr Balwinder Singh, W/I Central Workshop Member

ACADEMIC COUNCIL (Students) of SBSCET (Poly Wing), Ferozepur

1 140716247126 Ankit Passi 6th

Sem CE

2 140716247136 Mandeep Kaur 6th

Sem CE

3 140716147103 Harsh Gautam 6th

Sem ECE

4. 140716147106 Kumari Rupam Rai 6th

Sem ECE

5. 140715246958 Ashish Tiwari th 6 Sem EE

6. 140715347025 Dhanraj Kumar th 6 Sem ME

7. 140715347030 Gurmeet Teji th 6 Sem ME

8. 150716114128 Pargat Singh 4th

Sem ECE

246

9. 150716129819 Nirvair Singh 4th

Sem ECE

10. 150715314075 Lakshya Kumar Kalia th 4 Sem ME

Mechanism/Norms & Procedure for democratic/good Governance

The Policies are decided by the Board of Governors of the College. The College has its own

Bye- Laws for the administration of the College. Where the College Bye-Laws are silent, the

decisions are taken in accordance with the provisions of Punjab Civil Service Rules.

At Departmental Level, the decisions are taken on the recommendations of the various

committees constituted by the Head of the Department, whereas at the College Level the

decisions are taken in consultation with the Heads group.

In student affairs the decisions are taken in consultation with Chief Student Advisors / Chief Wardens / Wardens.

Student Feedback on Institutional Governance / faculty performance

The College has students consultative committee, and the feedback regarding the

Institutional Governance is taken through this forum. The feedback Performa given on next

page is filled-up by the students for the concerned teachers of the semester at the end of

every semester.

247

Shaheed Bhagat Singh College of Engg.& Tech. (Poly Wing), Ferozepur

Student’s Feedback Form

DEPARTMENT OF Session Sem. Branch Group Date: / /20

Note:Please give grades fir each item of Assessment to the respective teachers in the appropriate column to give your response

Excellent = 5 Very Good = 4 Good = 3 Fair = 2 Poor = 1

(A) Teaching Attributes:

Sr.

No.

Attribute

Subject:

Teacher:

Subject:

Teacher:

Subject:

Teacher:

Subject:

Teacher:

Subject:

Teacher:

Subject:

Teacher:

xi. Knowledge of the Subject.

xii. Way of Teaching/Method of Expression

xiii. Oral Communication in Class

xiv. Interaction with students in Tutorial class

xv. Experimental skills in Lab Class

xvi. Use of Teaching Aids

xvii. Punctuality in class

viii. Regularity in Evaluation & Return of

Home Assignments

xix. Regularity in Evaluation and Return of

248

Class tests

xx. Assessment of students

TOTAL

(B) General Attributes:

Sr.

No.

Attribute

Subject:

Teacher:

Subject:

Teacher:

Subject:

Teacher:

Subject:

Teacher:

Subject:

Teacher:

Subject:

Teacher:

vi. Control in Class

vii. Ability of motivating students

viii. Integrity

ix. Ability to take initiative

x. Sense of Humour

TOTAL

Note: Students are required to assist us to provide proper feedback on faculty, as perceived by the student. By no means, it is to be seen as an evaluation of teacher but to be seen as a process of ascertaining on parameters that could improve and enhance the effectiveness of teaching of a student for the benefit of our valued students.

Feedback Discussed with concerned Faculty on

date

Observations of the HOD

Observations of the HOD Observations of the Director

249

Grievance redressal mechanism for faculty, staff and students

Grievances of faculty and staff are addressed as per the mechanism provided in the

College Bye-Laws whereas the Student grievances are settled through a counseling Cell,

headed by Chief Counselor / Chief Warden / Wardens. The feedback from the students

is gathe ed the HOD s/Co-o di ato s/Tea he -I ha ge s of the o e ed department on his personal basis. Thereafter, the HOD / Co-ordinator / Teacher-

Incharge prepares a cumulative information about the concerned faculty / staff member

of the department and the said faculty / staff member is informed about the feedback

to improve upon his/her teaching methodology and interaction with the students. The

requirements/ problems of the faculty/staff members are looked into and the solutions

a e o ked out the Di e to o e i g eeti g ith all the HOD s / Co-ordinators

/ Teacher-In ha ge s.

V. PROGRAMMES

Name of the Programmes approved by the AICTE:--

1. 3 years Diploma in Computer Science and Engineering

2. 3 years Diploma in Electronics and Communication Engineering

3. 3 years Diploma in Electrical Engineering

4. 3 years Diploma in Mechanical Engineering

Name of the Programmes accredited by the AICTE: NIL

For each Programme the following details are to be given:--

Sr.

No.

Name of the

Programme

No.

of

Seats

Duration

Cut-off JET Rank of

admission

Fee (as per

Govt. /

Board

instructions)

Campus

Placement during

last three years

2012

2011

2010

Eligible

students

Students

placed

250

1

Diploma in

Computer Sc.

& Engg.

60

3 years

Matric

%age

Based

admissions

Matric

%age

based

admissions

Matric

%age

Rs.21,100

--

--

2

Diploma in

Electronics &

Comm. Engg.

60

3 years

Matric

%age

Based

admissions

Matric

%age

based

admissions

Matric

%age

Rs.21,100

--

--

3

Diploma in

Electrical Engg

60

3 years

Matric

%age

Based

admissions

Matric

%age

based

admissios

Matric

%age

Rs.21,100

--

--

3

Diploma in

Mechanical

Engg.

120

3 years

Matric

%age

based

admissions

Matric

%age

based

admissions

Matric

%age

Rs.21,100

--

--

251

Placement facilities : College has Training and Placement Cell.

Name and duration of programme(s) having affiliation/collaboration with

Foreign University(s)/Institution(s) and being run in the same Campus along

with status of their AICTE approval. If there is foreign collaboration, give the

following details: NOT APPLICABLE

Details of the Foreign Institution/University: NOT APPLICABLE

VI. FACULTY

Branch wise list faculty members:

Department of Applied Sciences & Humanities:--

Sr. No. Name Designation

1 Mr Rajnish Kumar DIC – Applied Sciences

2 Ms. Poonam Narang Lecturer-Physics

3 Ms. Daljeet Kaur Lecturer-Chemistry

4 Ms. Harmanpreet Kaur Lecturer-English

252

Department of Computer Sc. & Engineering:--


1 Ms Richa Sawhney DIC – Computer Engg Deptt

2 Mr Chetan Batra Lecturer CSE

3 Mr Sahil Kumar Lecturer CSE

4 Ms.Meenu Lecturer CSE

5 Ms.Rinkel Mehto Lecturer CSE

6 Ms.Anu Thind Lecturer CSE

7 Ms.Misha Mittal Lecturer CSE

Department of Electrical Engineering:--


1 Mr Rahul Sharma DIC – Electrical Engg Deptt

2 Mr Rajesh Kumar Lecturer EE

3 Mr.Vishal Singla Lecturer EE

4 Mr. Deepak Kumar Lecturer EE

253

5 Mr. Anmol Lecturer EE

6 Mr Arshdeep Singh Lecturer EE

Department of Electronics & Communication Engineering:--


1 Mr Gurjeevan Singh DIC - ECE

2 Mr.Ajay Kumar Lecturer ECE

3 Mr.Manpreet Singh Lecturer ECE

4 Ms .Mandeep Kaur Lecturer ECE

5 Ms. Simarpreet Kaur Lecturer ECE

6 Mr. Harleen Kaur Lecturer ECE

Department of Mechanical Engineering:--


1 Mr Gobind DIC - ME

2 Mr Retaish Uppal Lecturer ME

3 Mr.Rahul Chopra Lecturer ME

4 Mr Kamal Khanna Lecturer ME

5 Mr.Baljit Singh Lecturer ME

254

6 Mr Amarjeet Singh Sandhu Lecturer ME

7 Mr. Amandeep Singh Lecturer ME

8 Ms. Lakhwinder Lecturer ME

9 Mr Assa Singh Lecturer ME

10 Mr Pardeep Kumar Lecturer ME

Visiting Faculty - NIL

Adjunct Faculty - NIL

Guest Faculty - NIL

Permanent Faculty: Student Ratio - 1 : 20

Number of faculty employed and left during the last three years :

Employed – 20 Left - 06

255

1. Name : Dr. T.S. Sidhu

2. Date of Birth : 10/12/1965

3. Educational Qualification : Ph.D

4. Work Experience : 24

Teaching : 24

Research : 2.7Years

5. Area of specialization : Surfacing & Prod. Engg.

6. Subjects Teaching

At Under Graduate Level :

Engineering Materials

Production Planning and Control

Total Quality Management

Work Study and Ergonomics

Operation Research

Statistics

Methods Engg. & Ergonomics

At Post Graduate Level : Quantitative Techniques

Principles Practice and Mgmt.

256

7. Research Guidance

No. of students doing M. Phil. : No. of students doing Ph. D. :03 completed and 3 progress

No. of students doing M. Tech.:05

8. No. of Papers published 118

National Journals :9

International Journals :47

National Conferences:22

International Conferences :38

9. Projects carried out :51

10. Patents :02

11. Research Publications :24

257

-

(T.S. Sidhu) DIRECTOR

1. Profile of Faculty in the Department of Computer Sc. & Engineering

2. Profile of Faculty in the Department of Electrical Engineering

3. Profile of Faculty in the Department of Electronics & Comm. Engineering

4. Profile of Faculty in the Department of Mechanical & Production Engineering

5. Profile of Faculty in the Department of Applied Sc. & Humanities

VII. FEE

Details of fee, as approved by State fee Committee, for the Institution.

Please refer to Annexure – I

Time schedule for payment of fee for the entire programme

Half Yearly (i.e. per semester)

No. of Fee waivers granted with amount and name of students.

Please refer to Annexure – II

Number of scholarship offered by the institute, duration and amount –

Scholarships to Schedule Caste students are given by Punjab Govt. The

College also provide freeship to the meritorious students & to the needy

students as per the policy of the State Govt. for Govt. managed institutions.

Full Freeship : 5% of total intake in each discipline per year

258

T

Half Freeship : 5% of total intake in each discipline per year

Criteria for fee waivers/scholarship : Above mentioned scholarships

areoffered on merit basis. Apart from this College provides financial assistance to

economically weak students from Students Aid Fund on their request as per the

provisions of College Bye-Laws.

Estimated cost of Boarding and Lodging in Hostels:

Rs.1,500/- per month (approx.)ADMISSION

Sr. No. Name of Course Sanctioned Intake

1 Computer Engineering 60

2 Electronics & Comm. Engg. 60

3 Electrical Engg. 60

4 Mechanical Engg. 120

Total 300

259

AICTE Approved Intake during last 4 years

Number of seats sanctioned with the year of approval AICTE

Approved Intake during last 4 years

Courses

1st

Year of

approval by

AICTE (give

approval ref.

no. & date)

2013-2014

2014-2015

2015-2016

2016-2017

Status

of

Accredi

tation

(Validity

period)

Sanctio

ned

intake

* Actual

admission

s

Sanctio

ned

intake

Actual

admissions

Sanctioned

intake

Actual

admissio

ns

Sanction

ed

intake

Actual

admissions

Computer

Engg

60

(F No 47 (DAL

PB.) –

5/08/NWRO/

2795 dated

08.07.09)

60

27

60

26

60

18

60

12

NA

Electronics

& Comm.

Engg

60

(F No 47 (DAL

PB.) –

5/08/NWRO/

2795 dated

08.07.09)

120

26

120

17

120

12

60

06

NA

60

260

Year of establishment - 2009

Date on which first approval was accorded by the Council - 08.07.2009

Details of the last extension letter with year of approval F. No. 10-11 / NWRO – AICTE / Pun

/

Dip / 1410 dated

13/07/2010 for

academic session 2010 - 2012

Number of students admitted under various categories each year in the last three

years.

261

Electrical

Engg

F. No. 10-11 /

NWRO –

AICTE / Pun /

Dip / 1410

60

50

60

47

60

65

60

31

NA

Mechanical

Engg

120

F. No. 10-11 /

NWRO –

AICTE / Pun /

Dip / 1410

120

135

120

108

120

131

120

48

NA

Please refer to Annexure–III

Number of applications received during last two years for admission under Management Quota and number admitted.

NOT APPLICABLE

X. ADMISSION PROCEDURE Mention the admission test being followed, name and address of the Test

Agency and its URL (website).

Admission is done through Joint Entrance Test (JET) conducted by Punjab State Board of Technical Education and Ind Training, Punjab

Website of Test agency (PSBTE/IT,Pb, Chd): w .pu ja te hed. o

Number of seats allotted to different Test Qualified candidates separately [JET (State conducted test/Board tests)/Association conducted test]

All the seats are filled on the basis of merit in Joint Entrance Test (JET)

conducted by PSBTE/IT, Pb, Chandigarh. Criteria is decided by PSBTE/IT, Pb, Chd.

Calendar for admission against management/vacant seats:

NOT APPLICABLE

XI. CRITERIA AND WEIGHTAGES FOR ADMISSION

Describe each criteria with its respective weightages i.e. Admission Test, marks in qualifying examination etc.

262

http://www.punjabteched.com/


Admission is conducted on the basis of merit in Joint Entrance Test (JET)

conducted by PSBTE/IT, Pb, Chandigarh. Criteria is decided by PSBTE/IT, Pb, Chd.

Website of Test agency (PSBTE/IT,Pb, Chd): w .pu ja te hed. o

Mention the minimum level of acceptance, if any.

Pass in Matriculation or equivalent examination in Mathematics, Science (Physics, Chemistry and Biology) and English

Mention the cut-off levels of percentage & percentile scores of the candidates in the admission test for the last three years.

As per the guidelines and policies of PSBTE/IT, Pb, Chd

Display marks scored in Test etc. and in aggregate for all candidates who were admitted.

Please refer to Annexure–IV

XII. APPLICATION FORM

Downloadable application form, with online submission possibilities.

Admission is conducted by Punjab State Board of Technical Education and Industrial

Training, Punjab, Chandigarh and candidates may apply with on-line submission facility.

The Application Form is available on the web site of Punjab State Board of Technical

Education and Industrial Training, Punjab w .pu ja te hed. o .

263

XIII. LIST OF APPLICANTS





List of candidates whose applications have been received along with

percentile/percentage score for each of the qualifying examination in

separate categories for open seats.List of candidates who have applied

along with percentage and percentile score for Management quota seats.

List of candidates is available with Punjab State Board of Technical Education and

Industrial Training, Punjab, Chandigarh. The admission is being made on the basis of

JET, conducted centrally by PSBTE/IT, Pb, Chd.

XIV. RESULTS OF ADMISSION UNDER MANAGEMENT SEATS/VACANT SEATS

NOT APPLICABLE

(As our college is established by Punjab Govt.)

XV. INFORMATION ON INFRASTRUCTURE AND OTHER RESOURCES AVAILABLE

LIBRARY: THERE IS A COMMON LIBRARY IN THE COLLEGE SHARED BY ALL THE WINGS.FOR

DETAILS SEE SECTION :1

LABORATORY:

List of Major Equipment/Facilities & List of Experimental Setup

264

List of Experimental Setup:

As per the course curriculum of PSBTE/IT, Chd, all the experiments are done by

making full use of all equipments/facilities available in the respective laboratories.

Sr.

No.

Name of the

Department

Name of the

laboratory /

workshop

Total Area of

lab/workshop

(Sq. m.)

Major Equipment

Simultaneous

Thermal Analyzer

System

Deptt. of Applied

(DTA/TGA/DTG)

1 Sciences and Applied Physics 266 Fiber optic & data

Humanities transfer lab module

Tensile testing

madrive

Fringe Capture

265

Applied Chemistry

195

Atomic absorption

spectrophotometer

Gas Chromatograph,

Piccometer

Particle Size

analyzer, Optical

microscope

FTIR, High

Applied Chemistry Temperature

150

Research Microwave Furnace

Hydraulic Press.

Comm. Skill Lab.

133

LL Recorders Head

Sets Teacher console

TV,VCR,VCD

Multimedia Projector

Simultaneous

thermal Analyser

(DTA/TGA) High

Research (App.

150 Precision

Physics)

Balance,Fiber Optic

Trainers, Michelson ,

Interferometer.

IBM Xeon Server

266

2.

Computer Science

& Engineering

Computer Centre

380

and P-IV machines

(Details as per

Annexure – V of

Mandatory

Disclosure)

Computational Lab

112

P-IV and P-III

Computer Systems

(Details as per

Annexure – VI of

Mandatory

Disclosure)

Networking Lab

112

IBM Xeon Server

Pentium Dual Core

2.8GHz

(Details as per

Annexure – VII of

Mandatory

Disclosure)

267

3.

Electrical Engg.

MATLAB Lab

93

30 Computer

Systems

Scanner (HP)

UPS 5kva

LCD projector

Printer Dot-Matrix

Thyristor Firing

Angle Controller

PowerElectronics

Trainer

Lab

Jones Choper Trainer

EMMI Lab

93

CRO

Function Generator

Anderson Bridge

Wein Bridge

Potentiometer

LVDT

Multimeter

LCRQ Meter

AC Servo Meter

Pressure Transducer

Electromagnetic

Transducer (Speed

Control &

Instrument Lab 102 measurement)

268

269

DC Position Control

System

PID Controller

Compensation design

Watt Meter Single

Phase

Am Meter Ac/Dc

Volt Meter Ac/Dc

Transformer Single

Phase

Auto Transformer

Single Phase

Double Kelvin

Bridge

Machine Lab.-I

1kva transformer

102

2kva transformer

MG Set (shunt motor

&

Gen.)

MG Set (shunt motor

&

Series gen.).

MG Set (shunt motor

&

Comp. gen.).

4.

Electrical Engg.

3-Phase Induction

Motor

3-Phase .Slipring

270

Machine Lab-II

102

Motor.

Cascade two motor

set.

Starter of 3-phase

induction Motor.

Slipring induc.

Motor

1- phase induc.motor

1HP.

1-phase induc. Motor

2HP.

3-phase alternator

with dc motor.

Synchronous Motor

271

BEEE Lab

102

Rheostat

Decade Resistance

box

Inductance Variable

inductance Fixed

Multimeter Digital

Energy Meter Single

Phase

Tube Choke

Loading Rheostate

Single Phase

Loading Rheostate

Three Phase

Transformer Single

Phase

CVS 6V

Volt Meter Ac/Dc

Volt Meter Dc

Am Meter Ac/Dc

Am Meter Dc

Watt Meter

Frequency Meter

Capacitor Fixed

Variac Single Phase

Variac Three Phase

Megger

272

273

Power Facter Meter

Single Phase

Power Facter Meter

Three Phase

Induction Motor

Three Phase

D.C. Compound

motor

Motor Gen. Set

Multimeter Analog

5.

Electronics &

Communication

Engg.

Electronic Devices

& Networks Lab.

102

Electronic Devices

& Circuits Kits

Analog

electronics/Applied

Electronics Lab

102

Analog Electronics

kits,Amplifires Kits,

CRO s Os illato s

Digital Electronics

/DCLD Lab.

102

Digital Electronics

Kits

Analog

Communication

Kits, CRO S,

Function

Analog / Digital

Generators, Digital

Communication 102 Comm. Kits,

Lab.

CRO S, Fu tio

Generators, COMM

SIM, MATLAB,

Active VHDL,

PSPICE

Microprocessor

Microprocessor kits

Lab/

102 8085,8086, Micro-

Microcontroller

controller kits

Lab

AIC/ Linear

Integrated Circuits

102

Integrated Circuits

274

lab

kits

DSP/ VLSI Lab

102

30 IBM P-IV

Computers,

Softwares

COMMSIM,DSP

processor kits,DSP

Toolboxes

Microwave Lab. 102 Microwave Trainer

275

6.

Mechanical Engg

Thermal Engg. Lab

141.92

1. Computerized

Two Cylinder four

stroke diesel engine

test rig.

2. Two stage

Reciprocating air

compressor test rig.

3. Various

Components of

Engine

4. Models of

Various Types of

Boilers

5. Cut section

Model of Two &

Four stroke diesel

engine.

6. Cut section

model of two stroke

& four stroke petrol

engine.

7. Three cylinder

four stroke petrol

engine test rig with

hydrolic

dynamometer

276

6.

Mechanical Engg

8. 3 Cylinder,

4stroke Petrol

Engine test rig

Automobile Engg. Lab.

141.92

1. Old Ambassador

car.

2. Various Parts of

an automobile like

gear boxes, clutch,

Steering system,

Braking system,

cooling system etc.

3. Valve refacing

M/c.

277

Rig

3. Window Type

Air conditioning

Refrigeration & Air

Conditioning Lab.

278

Test Rig.

141.92 4. Gas Charging

Unit.

5. Cut Section

CAD Lab

141.92

Hardware

1. Thirty four

Computer System

with UPS

2. One Laser printer

3. Two Dot- Matrix

Printer

4. Plotter, 5 server,6

scanner

Software

Inventor 10.0 &

Auto CAD 2006

An sys software (32

Seats)

1. Ice Plant Tutor

2. Vapor

Compression Test

Models of Various

components of Ref.

& Air Lab.

1. Pneumatic

Trainer

Industrial. Automation

141.92 2. Hydraulic Trainer

6. Mechanical Engg. & RoboticsLab. 3. Pneumatic

Stamping

M/c

279

T.O.M. Lab.

141.92

1. Journal Bearing

apparatus

2. Different types of

Governors

apparatus

3. Gyroscope

apparatus.

4. Balancing of

masses apparatus.

5. Different type of

models of various

links &

Mechanisms.(45

No.)

S.O.M. Lab.

107.52

1. Universal Testing

Machine

2. Torsion Testing

Machine

3. Impact Testing

Machine

4. Spring Testing

Machine

5. Hardness Testing

Machine

1. Metallurgical

280

Microscope

2. Specimen cutting

Engineering Material

Machine

141.92

& Metallurgy 3. Bench Grinder

4. Polishing

Machine

5. Belt Grinder

281

6.

Mechanical Engg.

M.P.-I

141.92

1. Sieve Shaker

2. Sand weighing

Scale

3. Drying Oven

4. Mould Hardness

Teser

5. Calibration unit

Fas

6. Sand Rammer

7. Moisture Tester

8. Sand Surface

Tester

9. Mig Welding M/c

Project

10. Spot welding

M/c Project

11. Tig welding

machine

12. SAW welding

machine

13. Mig welding

machine

Manufacturing Process

Lab-II

1. Electro Discharge

M/c

2. Solid works 3D Metal Forming Lab.

282

141.92 Software

Machining Science 3. CNC Mill

Lab.

Trainer(Techno

fort)

N.D.T. Lab.

33.60

1. Ultasonic Crack

Detector

2. Ultrasonic

Coating Thickness

Gauge

3. Ultrasonic

Thickness Gauge

4. Magnetic Crack

Detector

M/c Drawing, & Engg.

Graphics Drg.

915.48

283

Fluid Mechanics Lab.

141.92

1. Be oulli s

theorem apparatus

2. Flow

measurement of

venture meter and

orifice meter.

3. Pipe friction

apparatus.

4. Orifice and

mouthpiece

apparatus.

5. Flow over a notch

apparatus.

6. losses in pipe

fitting apparatus.

7. Laminar &

Turbulent flow

apparatus.

8. Pitot tube

apparatus.

9. Metacentric

height apparatus.

1. Tool Makers

Microscope

2. Vernier Height

284

Gauge

3. Different types of

micrometers.

4. Sine bar.

5. Slip gauges box

set.

6. Granite surface

plate.

7. Bench centre

Metrology & Mech.

141.92 apparatus.

Measurement Lab.

8. Box angle plate.

9.Magnetic V-

Block.

10 Various types

ofdial indicators.

11. Vernier calipers

12. Angle plate.

13 Potentiometers

14. LVDT Tutors.

15. Transducer.

16. Strain gauges.

17. Load cells.

285

Mechanical Vibration

Laboratory

141.92

Universal Vibration

Laboratory

Computing Facilities, Major Softwares: THIS FACILITY IS SHARED BY ALL THE WINGS.FOR

DETAILS SEE SECTION :1

Workshop: THIS FACILITY IS SHARED BY ALL THE WINGS.FOR DETAILS SEE SECTION:1

Games and Sports Facilities:--

Foot Ball, Hockey, Volley Ball, Basket Ball,

Badminton, Cricket, Athletics, Yoga, Lawn Tennis, Kabbadi, etc.

Extra Curriculum Activities:--

NCC, NSS, Society of Extra Curricular

Activities, Moksh Band, Eco Friendly, Quest

Club, Professional Societies in each Deptt.

Soft Skill Development Facilities:--

Professional Societies in each Deptt.

Number of Classrooms and size of each

15 (81 sq. m. of each)

Number of Tutorial rooms and size of each

14 (40 sq. m. of each)

286

Number of laboratories and size of each

50 (Total Area 5684 sq. m.)

Number of drawing halls and size of each

06 (200 sq. m each)

Number of Computer Centres with capacity of each

1 (400 sq. m.)

Central Examination Facility, Number of rooms and capacity of each.

2 Drawing Halls with capacity 60 each

04 Drawing Halls with capacity 40 each

04 Lecture Halls with capacity 40 each

04 Tutorial Rooms with capacity 20 each

Total = 520 students

Teaching Learning process

Through Class Room teaching, through

Laboratory Work, through Projects, through

Seminars / Workshops, through Industrial Visits,

287

through Industrial Training, Conducting Quiz, Through invited talks etc.

Curricula and syllabi for each of the programmes as approved by the University.

As per Punjab State Board of Technical

Education and Industrial Training, Punjab,

Chandigarh.For various disciplines. Curricula and

Syllabi are available on web-site of PSBTE/IT, Pb.

w .pu ja te hed. o .

Academic Calendar of the University:

Please refer to Annexure–V

Academic Time Table

Please refer to Annexure–VI

Teaching Load of each Faculty

HOD – 8-10 hrs

Sr Lecturer – 12-14 hrs

Lecturer – 16-18 hrs

Internal Continuous Evaluation System and place

Three tests are conducted, out of which two

best are counted. Ten assignments are given in

each subject for assessing day to day work of

the students.

Students’ assessment of Faculty, System in place.

Done regularly

288



For each Post Diploma programme give the following:

a. Title of the programme

b. Curricula and Syllabi --- N. A. ---

c. Faculty Profile

289

Annexure – I

FEE STRUCTURE FOR DIPLOMA PROGRAMME (2010 Batch)

I.

B

I.

II.

III.

C

I.

II.

III.

IV.

V.

VI.

VII.

VIII.

IX.

X.

290

Tuition Fee

Tuition Fee (half yearly) 11000.00

Yearly Fee (Development & Student Activities Fund)

Development Fund (yearly) 2750

Student Activities Fund (yearly) 1675

Student Activities Fund (one time) 200

Miscellaneous Fund

Maintenance of Computer Centre and internet charges 500

Student Exigency Fund 250

Power back-up charges 250

Training and Placement charges 500

Refundable Security (one time) 500

College Information Brochure Fee (one time) 200

Souvenir & Group Photograph Fee (one time) 350

Student Aid Fund 50

College Electricity charges (as applicable) 930

Common Hostel Charges (Mess equip, utensil fee, hostel estb

charges, hostel maint fund, etc)

350

TOTAL FEE (Triple Seater) Rs.23,535

TOTAL FEE (Day Scholar) Rs.21,105

SC / ST Post Matric Scholarship scheme

(a) Triple Seater [{B (iii) Rs100} + C (i),(iii),(iv),(v),(vi),(vii),(ix),(x) + D (i),(iii) + E (i),(ii)]

(b) Day Scholar [{B (iii) Rs100} +C (i),(iii),(iv),(v),(vi),(vii),(ix),(x)+D (i),(iii)]

(a) Rs.7,060/-

(b) Rs.4,630/-

291

Registration Charges (One Time) 500.00

House Examination stationary charges (yearly) 100.00

Application Form Fee 250.00

Annexure – II

LIST OF TOTAL STUDENTS ADMITTED UNDER FEE WAIVER

SCHEME (2016-17)

Sr Name Father's Name Date of Birth Matric %age Branch Allotted

1 AAKASH PANKAJ KUMAR 23.06.2001 80 Computer Engg.

2 NITIN PATHAK NAVEEN CHAND 13.10.1999 72 Computer Engg.

3 NITISH GROVER

JAGDISH LAL

GROVER

8.8.2000

70

Electrical Engg.

4 DHANVEER JAGROOP SINGH 20.6.1997 57.53 Electrical Engg

5 HARPAL SINGH KULDEEP SINGH 3.10.1998 70 Electrical Engg

6 GAGANDEEP SINGH NISHAN SINGH 14.10.1997 88 Mechanical Engg.

292

7 KARANVEER SINGH SHER SINGH 22.3.2001 72.3 Mechanical Engg.

Mechanical Engg.

8 OMKAR PANDEY ASHOK KUMAR 1.10.1997 69.4 Mechanical Engg.

Mechanical Engg.

9 SANDEEP KHARAK BAHADUR 2.11.1998 68.3 Mechanical Engg.

Mechanical Engg.

10

RAMANDEEP SINGH

BRAR

GURPREET SINGH

BRAR 20.7.1999

84 Mechanical Engg.

293

Annexure – III

NUMBER OF STUDENTS ADMITTED UNDER VARIOUS CATEGORIES EACH

YEAR IN THE LAST THREE YEARS

2016-17 2015-16 2014-15

S.

No

Course

Name

Category Total

Seats

Seats

Filled

Total

Seats

Seats

Filled

Total

Seats

Seats

Filled

1

Com

pute

r E

ngg

Backward Area,Others 1 - 1 - 1 1

2 Backward Class,Others 1 - 4 - 4 4

3 Border Area,Others 1 - 1 - 1 1

4 Children/Widows of Defence Personnel,Others 1 - 1 - 1 1

5 Children/Widows of Police/Para military forces,Others 1 - 1 - 1 1

6 General,Others 33 12 33 18 33 26

7 Handicapped,Others 1 - 1 - 2 2

8 Handicapped Blind,Others 1 - 1 - 0 0

9 Scheduled Caste/Scheduled Tribe,Others 14 4 14 3 14 7

10 Sports Person,Others 1 - 1 - 1 1

11 T-Sunami / Freedom Fighter 1 - 1 - 1 1

12 Terrorist/Riots vicitims,Others 1 - 1 - 1 1

1

Ele

ctro

nics

and

Com

m.

Eng

g.


2 Backward Class,Others 1 - 1 - 1 2




6 General,Others 33 6 33 12 33 17



9 Handicapped Deaf and Dumb,Others 1 - 1 - 1 -

294

10 Scheduled Caste/Scheduled Tribe,Others 14 1 14 3 14 5

11 Sports Person,Others 2 - 2 - 2 1

12 Freedom Fighter,Others 1 - 1 - 1 1

13 Terrorist/Riots vicitims,Others 2 - 2 - 2 1

14 T-Sunami,Others 1 - 1 - 1 -

1

Elec

trica

l E

ngg

Backward Area,Others 1 - 1 - 1 -

2 Backward Class,Others 3 - 3 - 4 -

3 Border Area,Others 2 - 2 - 1 -

4 Children/Widows of Defence Personnel,Others 1 - 1 - 1 -

5 Children/Widows of Police/Para military forces,Others 1 - 1 - 1 -

6 General,Others 33 33 - 33 -

7 Handicapped,Others 1 - 1 - 2 -

8 Handicapped Blind,Others - - - - 0 -

9 Scheduled Caste/Scheduled Tribe,Others 15 - 15 - 14 -

10 Sports Person,Others 1 - 1 - 1 -

11 T-Sunami / Freedom Fighter 1 - 1 - 1 -

12 Terrorist/Riots vicitims,Others 1 - 1 - 1 -

1

En

gg

Mec

hani

cal


2 Backward Class,Others 6 - 6 2 3 3




6 Freedom Fighter,Others 1 - 1 - 1 1

7 General,Others 67 28 67 56 33 33



10 Handicapped Deaf and Dumb,Others 1 - 1 - 1 1

11 Scheduled Caste/Scheduled Tribe,Others 30 - 30 - 16 16

12 Sports Person,Others 2 - 2 - - -

13 Terrorist/Riots vicitims,Others 2 - 2 - - -

295

14

T-Sunami,Others 1 - 1 - - -

296

Annexure – IV

Marks scored in Test (JET) and in aggregate for all candidates who were admitted during

Academic year 2016-2017

Sr No. Registration No. Student's Name

Father's Name

Mother's Name Branch Admission Details

1 160716211151 AAKASH PANKAJ KUMAR JYOTI ARORA CE ONLINE

2 160716211152 AKSHAY SHARMA JASVINDER SHARMA RANI CE DIRECT

3 160716211153 ANKITA GUPTA HARIBHUSHAN GUPTA LATIKA GUPTA CE DIRECT

4 160716211154 NITIN PATHAK NAVEEN CHAND SUNITA PATHAK CE ONLINE

5 160716211155 PALAK SINGH SATISH KUMAR SINGH VIJAYA SINGH CE DIRECT

6 160716211156 PARICHAY PARIJAT GOPAL SINGH NITU SINGH CE DIRECT

7 160716211157 PRIYA SARKAR BINOD BIHARI SARKAR APARNA SARKAR CE DIRECT

8 160716211158 PRIYA SHARMA VIJAY KUMAR SAVITA CE DIRECT

9 160716211159 RAGHAV JOSHI VINOD KUMAR JOSHI BINDU JOSHI CE DIRECT

10 160716211162 TARUNPREET SINGH DIDAR SINGH RAJENDER KAUR CE DIRECT

297

1 160716111145 ANMOLDEEP SINGH JASWINDER SINGH PREETUPKAR KAUR ECE DIRECT

2 160716111146 BEANT SINGH BALWINDER SINGH HARJINDER KAUR ECE DIRECT

3 160716111147 KUMARI DIVYASHREE SUMAN KUMAR SINGH KIRAN SINGH ECE DIRECT

4 160716111148 MANPREET KAUR KULWANT SINGH BALBIR KAUR ECE ONLINE

5 160716111149 RASPREET SINGH DHALIWAL BALWINDER SINGH HARJINDER KAUR ECE DIRECT

1 160715211073 ARSHDEEP SINGH MOHINDER SINGH JANGIR KAUR EE DIRECT

2 160715211079 GURDIT SINGH SATNAM SINGH GURMEET KAUR EE DIRECT

3 160715211082 MANPREET SINGH DALBIR SINGH JYOTI EE DIRECT

4 160715211094 SUBHASH KUMAR KAILASH MAHTO BILASI DEVI EE DIRECT

298

Sr No. Registration No.

Student's Name

Father's Name

Mother's Name Branch

Admission Details

5 160715211096 VISHAL KUMAR BAIJNATH RAM GAYTRI DEVI EE DIRECT

6 160715211087 SAGAR KUMAR ANAND THAKUR SAVITRI DEVI EE DIRECT

7

8

160715211075 BHARAT KUMAR MAHATO DINBANDHU MAHATO JHALWA DEVI

EE DIRECT

9 160715211091 SHAILESH KUMAR SAHNI HIRDYA SAHNI KALINDA DEVI EE DIRECT

10 160715211071 ANKIT KUMAR SAHNI RAJESH SAHNI VIDYAVATI DEVI EE DIRECT

11 160715211095 SURAJ KUMAR SAHANI PRABHUNATH SAHANI MEENA DEVI EE DIRECT

12 160715211093 SUBHAM KUMAR SATINDER KUMAR KUMARI PUSPHALATA EE DIRECT

13

160715211089

SAURABH KUMAR TRIPURARI PD

CHOURASIYA KANCHAN DEVI EE

DIRECT

14 160715211069 ADITYA KUMAR RANJIT PRASAD RINA DEVI EE DIRECT

15 160715211092 SIKANDAR KUMAR SURESH MAHTO DULARI DEVI EE DIRECT

16 160715211066 ABHISHEK KUMAR ANIL DAS ANIMA DEVI EE DIRECT

17 160715211081 KAFIL AHMED JALIL AHMED TALAT SAYEEDA EE DIRECT

18 160715211086 PURUSHOTTAM KUMAR BHUPESH KUMAR GEETA DEVI EE DIRECT

19 160715211077 DHARAMVEER KUMAR MANOJ KUMAR SINGH NISHA DEVI EE DIRECT

20 160715211078 GULAME AHMED RAJA MD NAIMUDDIN AHMED CHAND TARA EE DIRECT

299

21 160715211090 SHAHZEEB AKHTAR FASHI AHMAD LAILA KHATOON EE DIRECT

22 160715211067 ABHISHEK KUMAR UMA SHANKAR RAM NANDJHARO DEVI EE DIRECT

23 160715211083 NARENDRA ATIBHAN SINGH BABY EE DIRECT

24 160715211072 ARMAN ALI ZUFIQUAR ALI AMBIA KHATOON EE DIRECT

25 160715211074 ASHUTOSH KUMAR AJAY KUMAR KIRAN KUMARI EE DIRECT

26 160715211085 NITISH KUMAR KAMAL KISHORE BINU DEVI EE DIRECT

27 160715211070 AJAY KUMAR RAJESH KUMAR SONIA EE DIRECT

28 160715211084 NITISH GROVER JAGDISH LAL GROVER ISHA GROVAR EE ONLINE

29 160715211076 DHANVEER JAGROOP SINGH PARMJEEET Kaur EE ONLINE

30 160715211080 HARPAL SINGH KULDEEP SINGH KARMJEET KAUR EE ONLINE

31 160715211068 ABHISHEK NAHAR DHARMINDER NAHAR EE ONLINE

300


Student's Name

Father's Name


Admission Details

1

160715311099

ABHITESH CHANDRA

HARENDRA KUMAR

ME

DIRECT

2 160715311100 ADITYA KUMAR VIJAY KUMAR SHRIVASTAVA SARITA ME DIRECT

3

160715311101

ADITYA RAJ SHASHI BHUSHAN

SHRIVASTAVA ANJANA ME

DIRECT

4 160715311102 ADITYA RAJ SHANTOSH KUMAR LAKSHMI KUMARI ME DIRECT

5 160715311103 AMITESHWAR SINGH MUTTI AMARJIT SINGH SANDEEP KAUR ME DIRECT

6 160715311104 ANKIT KUMAR RAKESH KUMAR RANGEELA DEVI ME DIRECT

7

160715311105

ARVIND KUMAR SHIVLOCHAN PRASHAD

BIND PUSHPA DEVI ME

DIRECT

8 160715311107 GAGANDEEP SINGH NISHAN SINGH GURJEET KAUR ME ONLINE

9 160715311108 GURJANT SINGH BALJIT SINGH RUPINDER KAUR ME DIRECT

10 160715311109 GURPREET SINGH JASVEER SINGH CHHINDER KAUR ME ONLINE

11 160715311110 HARVINDER SINGH MUKTIAR CHAND PARAMJEET KAUR ME DIRECT

12 160715311111 IMRAN RABBANI MD ILIYAS RABBANI SHABANA RABBANI ME DIRECT

13 160715311112 JAJPAL SINGH SURJEET SINGH MANJEET KAUR ME DIRECT

14 160715311113 KARANDEEP SINGH PARTAP SINGH PALWINDER KAUR ME DIRECT

301

15 160715311114 KARANVEER SINGH SHER SINGH BIMLA RANI ME ONLINE

16 160715311115 KESHAV GOYAL RAJ KUMAAR GOYAL ANITA GOYAL ME DIRECT

17 160715311116 LOKESH KUMAR RAJESH KUMAR MANDAL MALTI DEVI ME DIRECT

18 160715311117 LOVEPREET SINGH RAJINDER SINGH PARSHANT KAUR ME DIRECT

19 160715311118 MANDEEP KUMAR SURESH KUMAR SARLA ME DIRECT

20 160715311119 MANDEEP SINGH BALWINDER SINGH SWARNJIT KAUR ME DIRECT

21 160715311120 MANDEEP SINGH BALJINDER SINGH CHHINDERPAL ME DIRECT

22 160715311121 MANPREET SINGH JASPAL SINGH JASWINDER KAUR ME DIRECT

23 160715311122 MD SAKIB SHEKH SHMIM RAZA NEGAR SAHZADI ME DIRECT

24 160715311123 NITISH KUMAR KANHAIYA PRASAD SANJAY DEVI ME DIRECT

302


Student's Name

Father's Name


Admission Details

25 160715311124 NITISH KUMAR VIJAY KUMAR REKHA DEVI ME DIRECT

26 160715311125 OMKAR PANDEY ASHOK KUMAR SHAKUNTLA DEVI ME ONLINE

27 160715311126 PALWINDER SINGH KASHMIR SINGH CHHINDER KAUR ME ONLINE

28 160715311127 PRASHANT RAJ ARVIND KUMAR MALAKAR SUNITA DEVI ME DIRECT

29 160715311128 RAHUL SHARMA PARAMJEET SHARMA NISHA SHARMA ME DIRECT

30 160715311129 RAJNEESH SURYAVANSHI RAJAN KUMAR SANGEETA ME DIRECT

31 160715311130 RAJWINDER SINGH MAJOR SINGH SIMARJIT KAUR ME DIRECT

32

160715311131

RAMANDEEP SINGH BRAR GURPREET SINGH BRAR RAJPREET KAUR

BRAR ME

ONLINE

33 160715311132 RAUSHAN KUMAR SUBHASH MEHTA MEERA DEVI ME DIRECT

34 160715311133 RISHAV KUMAR MANISH SINGH SADHANA SINGH ME DIRECT

35 160715311134 ROHIT KUMAR GUPTA BRIJ KISHOR GUPTA SITA DEVI ME DIRECT

36 160715311135 SANDEEP KHARAK BAHADUR PREM KUMARI ME ONLINE

37 160715311138 SATYAM SHUKLA HARIHAR PRASAD SHUKLA MEERA SHUKLA ME DIRECT

38 160715311139 SAURAV KUMAR SHASHI KUMAR SHIWANI GUPTA ME DIRECT

39 160715311140 SHASHANK SHEKHAR MANOJ KUMAR SEEMA KUMARI ME DIRECT

303

40 160715311141 SURAJ KUMAR SAW ANGLAL SAW REKHA DEVI ME DIRECT

41 160715311142 VICKY KUMAR SATRUGHAN PRASAD PHOOLMATI DEVI ME DIRECT

42 160715311143 VIJAY KUMAR SALIK RAM SHIV KUMARI ME ONLINE

43 160715311144 YASHDEEP PURAN CHAND RAJPUT MEENA ME DIRECT

304

Annexure – V

PUNJAB STATE BOARD OF TECHNICAL EDUCATION & INDUSTRIAL

TRAINING, PUNJAB

Academic Calendar

FOR SESSION Jan-June, 2017

Academic Activity 2nd

, 4th

, 6th

Sem

1 Student’s Registration

2 Start of classes 3rd Jan, 2017

3 1st

MST 22 – 24 Feb, 2017

4 2nd

MST 29 – 31 March, 2017

5 3rd

MST 26 – 28 April, 2017

305

6 Rationalization of Sessional marks 3 May, 2017

7 Practical Viva Voce Exams As per PSBT Schedule

8

Board’s Examination 6th May, 2017 – 9th June,

2017

306

Annexure – VI

Session: JAN - JUNE 2017. Department: CE Polytechnic Wing

Shaheed Bhagat Singh State Technical Campus, Ferozepur

Time Table-Even SEMESTER

Monday Tuesday Wednesday Thursday Friday

1 08 to 09 L

RM

DSU

C D-

204

2 09 to 10 P

RS

OOPC

D-217

L

MM

CA

D-204

L

MM

CA

D-222

L

CB

IWT

D-204 L

RC

GSED

D-204

3 10 to 11 L

RS

OOPC

D-204

L

RS

OOPC

D-204

L

RC

GSED

D-204

P

AKS

MP

A-325

4 11 to 12 L

AKS

MP

D-204

L

CB

IWT

D-204

L

AKS

MP

D-204

5 12 to 01 LUNCH L

RC

GSED

D-204

LUNCH

6 01 to 02 LUNCH P

CB

IWT

D-217

LUNCH P

RM

DSUC

D-209

LUNCH

7 02 to 03 L

AKS

MP

D-204

L

AKS

MP

D-204

L

CB

IWT

D-204

8 03 to 04 L

MM

CA

D-204

L

MM

CA

D-205

L

RS

OOPC

D-204

307

1.RS-Richa Sawhney 2. AKS-Ajay Kumar Singla 3.MM-Misha Mittal 4. CB-Chetan Batra 5.RM-Rinkel Mehto 6.RC-Rahul Chopra 7. AT-Anu Thind

Semester, CE Group: D7

Na

me

of

Clas

s:

4th

Session: Jan June 2017. Department: ECE Polytechnic Wing


Time Table-EVEN SEMESTER

Name of Class: 4th Semester, ECE Group: D8


1

08-09

------------

------------

-------------

P

MK

SCA L

HK

MP

D 221

2 09 – 10 L NFTL L MP L NFTL L MP L NFTL

308

9 04 to 05 L

CB

IWT

D-204 L

RM

DSUC

D-204

P AT

SCA L

RM

DSU

C D-

204

MP OOPC CA IWT DSUC GSED

Microprocessor

Object oriented programming

using C

Computer architecture

Internet web Technologies

Data structure using C

General Skills

entreprenurship

Development

MK D 222 HK D 221 MK D 221 HK D 205 MK D 221

3

10 – 11

P

AKS

CS-I

A303

P

MK

NFTL

A 317

L

SK

PE

D 221

L

AKS

CS-I

D 205

P

HK

EDFT

A 327

4

11 – 12

L

AKS

CS-I

D 221

L

MK

GSED

D 221

5

12 – 01

L

HK

MP

D 222

L

SK

PE

D 221

6 01-02 LUNCH LUNCH LUNCH LUNCH LUNCH

7

02 – 03

L

SK

PE

D 221

P

SK

PE

A 317

P

MK

EDFT

A 327

P

HK

MP

A 325

L

AKS

CS-I

D 205

8

03 – 04

L

AKS

CS-I

D 205

L

SK

PE

D 205

9

04-05

L

MK

GSED

D 205

L

MK

GSED

D 205

1. HK Harleen kaur 2. MK Mandeep Kaur 3. AKS Ajay Kumar Singla 4. SK Simarpreet Kaur

CS-I MP GSED NFTL EDFT PE SCA

Communication System-I

Microprocessor

General Skills &

Entrepreneurship

Development

Network

Filters &

Transmission

Electronic Design &

Fabrication

Technique

Power Electronics

Student

Centered Activities

309

Lines

310

Session: JAN - JUNE 2017 Department: EE Polytechnic Wing


Time Table-Even SEMESTER

Name of Class: 4th Semester, EE Group: D10


1 08 – 09

2

09 – 10

L

AS

GSED

L-304

P EMI

G2

RKS

A-127

P PCMR

G1

DK D-217

P EWP-II

G1

AS W/S

P PCMR

G2

VS D-217

L

RKS

EMI

D-224

L

RKS

EMI

D-224

3

10 – 11

L

AK

EM-I

D-224

P EMI

G1

RKS A-127

P EM-I

G2

AK A-118

P E-II

G2

VS A-317

P EM-I

G1

AK A-118

4

11 – 12

L

VS

E-II

D-224

5

12 – 01

L

AK

D-224

EM-I L EMI

RKS D-224

LUNCH

6

01-02

LUNCH

LUNCH

L ECEE

VS D-224

LUNCH

LUNCH

7 02 – 03 P E-II P EWP-II L E-II L GSED L E-II L EM-I

311

G1

VS A-317

G2

DK W/S

VS D-224 AS D-224 VS D-224 AK D-224

8

03 – 04

L

AK

EM-I

D-224

L

RKS

EMI

D-224

L

AS

GSED

D-224

P

SCA

9

04-05

L

VS

ECEE

D-224

L

VS

E-II

D-224

L

VS

ECEE

D-224

1. AS Arshdeep singh 2. AK Anmol Kumar 3. VS Vishal Singla 4. RKS Rajesh Kumar Singla 5. DK Deepak Kumar

E-II EWP-II GSED PCMR EMI EM-I SCA

Electro-II Electrical Workshop

Practice – II

General Skills &

Entrepreneurship

Development

PC Maintenance &

Repair

Electrical

Measurement &

Instrumentation

Electrical Machines-

I

Student

Centred

Activities

312

Session: Jan -June 2017 Department: ME Polytechnic Wing



Name of Class: 4th Semester ME-B Group: D 12


1

08-09

L AJS

GSED

D-206

L

LK

SOM

D-206

L

ADS

WT-2

D-206

P

SCA

2 09 – 10

P

PK

MED 2

DH-1

P HAP

G1

KK FM

LAB

P SOM

G2

LK SOM

LAB

P

W/S

WT-2

P SOM

G1

LK SOM

LAB

P T-1

G2

RU AT

LAB

P

W/S

WT-2

3

10 – 11

4

11 – 12

L

KK

HAP

D 206

P HAP

G2

KK FM

LAB

P T1

G1

RU AT

LAB

5

12 – 01

L

RU

T1

D206

L

KK

HAP

D206

L

LK

SOM

D206

6

01-02 LUNCH LUNCH LUNCH LUNCH LUNCH

7

02 – 03

L

LK

SOM

D206

P

PK

MED

DH-2

L

ADS

WT-2

D206

L

ADS

`

WT-2

D220

L

RU

T-1

D 206

8

03 – 04

L

RU

T-1

D206

L

RU

T-1

D206

L

AJS

GSED

D 206

L

ADS

WT-2

D 221

9

04-05

L

KK

HAP

D206

L

LK

SOM

D206

L

KK

HAP

D206

L

AJS

GSED

D221

1. ADS Amandeep Singh 2. AJS Amarjeet singh 3.KK Kamal Khana 4. RU Ritesh Uppal 5. Lk Lakhwinder kaur 6.Pardeep kumar

314

WT-2 GSED HAP SOM MED-2 T-1 SCA

GENERIC SKILLS

Workshop

technology-2

&

ENTERPRENEURSHIP

HYDRAULICS AND

PNEUMATICS

Strength of material

Mechanical engg.

drawing

Thermodynamics-1

Student

Centered

Activities development

Session: Jan June - 2017. Department: CE Polytechnic Wing



Name of Class: 6th Semester CE Group: D13


1 08 to 09

2

09 to 10 L

AT

MSD

D-204

L

AT

MSD

D-220

L

CB

NS

D-204

P

AR

CG

D-217

P

RS

MP

D-217 3 10 to 11 L NS L CG L BOM

315

CB D-204 AR D-205 MEENU D-222

4

11 to 12 L CG

AR D-204

L NS

CB D-205

L CG

AR D-222

5

12 to 01

LUNCH

L BOM

MEENU D-204

LUNCH

6 01 to 02

P

AT

MSD

D-217

LUNCH

P

SK

IMT

D-217

LUNCH LUNCH

7

02 to 03 L

SK

IMT

D-204

L

SK

IMT

D-204

L

MEENU

BOM

D-220

8

03 to 04

L

HBK

204

SS

D-

L

AT

MSD

D-205

L

SK

IMT

D-220

9

04 to 05 P

MEENU

SCA L

HBK

SS

D-205

P

HBK

SS

D-222

1. AT: Ms. Anu Thind 2. CB: Mr. Chetan Batra 3. AR: Mrs. Anuradha Rani 4. SK: Mr. Sahil Kumar 5. HBK: Ms. Harbeer Kaur

6. RS: Mrs. Richa Sawhney 7. Mrs. Meenu

MSD CG NS BOM SS IMT MP

MULTIMEDIA SYSTEM

DESIGN

COMPUTER GRAPHICS

NETWORK SECURITY

BASICS OF

MANAGEMENT

SOFT SKILLS

INSTALLATION

MAINTENANCE AND

TROUBLESHOOTING

MAJOR PROJECT

316

Session: Jan June - 2017. Department:ECE Polytechnic Wing



Name of Class: 6th Semester ECE Group: D14


1

08-09

L

SK

VLSI

D 222

---------------

L

HK

MRE

D 222

L

SK

VLSI

D 205

L

HBK

SS

D 222

2

09 – 10

L

HBK

SS

D 205

L

SK

VLSI

D 205

L

HBK

SS

D 205

P

SK

MP

A 316

L

SK

VLSI

D 205

3

10 – 11

L

GS

WMC

D 205

P

GS

CN

A 303

L

GS

WMC

D 205

L

GS

CN

D 205

4

11 – 12

P

MPS

MP

A 316

L

MPS

BOM

D 205

L

GS

CN

D 205

P

MPS

MP

A 316

5

12 – 01

L

GS

CN

D 205

L

MPS

BOM

D 205


7 02 – 03 L MRE L MRE L WMC L WMC P MRE

317

HK D 205 HK D 205 GS D 205 GS D 205 HK A 303

8

03 – 04

P

GS

WMC

A 316

L BOM

MPS D 205

P

SK

MP

A 316

P

MK

VLSI

A 327 9

04-05

L CN

GS D 205

1. GS Gurjeevan Singh 2.HK Harleen Kaur 3.MK Mandeep Kaur 4. SK Simarpreet Kaur 5. MPS Manpreet singh 6. HBK Harbeer kaur

MP VLSI WMC MRE BOM CN SCA

Major Project

VLSI System

Design

Wireless & Mobile

Communication

Microwave & Radar

Engg.

Basics of

Management

Computer Networks

Student

Centered

Activities

318

Session: Jan June 2017. Department: EE Polytechnic Wing



Name of Class: 6th Semester EE Group: D16


1

08 – 09

---------------

L

AS

PLC

D-204

----------------

L

DK

BOM

D 224

-------------

2

09 – 10

L

DK

UEE

L-309

L

HBK

SS

D-222

L

DK

UEE

D 224

L

AK

EM

D 206

P

DK

MP

A 117 3

10 – 11

P PLC AS

G1 A 325

P EP-II

RS G2 A

116

L

RS

EP-II

D 224

L

RS

EP-II

D 224

L

RS

EP-II

D 224

4

11 – 12

L

AK

EM

D 220

P

AK

MP

A117

P

RS

MP

A 117

L

RS

EP-II

D 224

5

12 – 01 LUNCH

L

DK

UEE

D 205

6 01-02 LUNCH P PLC

G2

AS A325

P EP-II

G1

RS A116

LUNCH LUNCH LUNCH

7

02 – 03

L

AS

PLC

D 224

L

AK

EM

L 309

L

DK

BOM

D 221

L

AS

PLC

L 304

319

8

03 – 04

L

AK

EM

D 224

L

HBK

SS

D 204

L

DK

UEE

D 204

P

AK

MP

A 117 9

04-05

L

HBK

SS

D 224

L

DK

UEE

D 114

L

DK

BOM

D 204

L

AS

PLC

D 204

1. RS Rahul Sharma 2. DK Deepak Kumar 3. AS Arshdeep Singh 4. AK Anmol 5. HBK Harbeer kaur

MP EP-II PLC UEE EM BOM SCA

Major Project

Electrical Power-II

Programmable Logic Controllers

Utilization of Elect. Energy

Electrical Machines

Basics of Management

Student

Centered Activities

320




Name of Class: 6th Semester ME Group: D 17


1

08-09 L

PK

CNC

D-114

L

BS

MAI

D-114

2

09 – 10

L

BS

MAI

D114

P MAI

G1

BS EMM

P CNC

G2

AS CNC

Lab

L

RC

AE

D114

L

HBK

SS

D114

L

HBK

SS

D114

L CNC

P AE P CNC 3 10 – 11

P

GOB

PROJ.

EMMLAB

PK D114 G2 G1

4

11 – 12

L BOM

GOB D114

RC

AT

AS

CNC

L

GOB

BOM

D114

P

PROJ.

LAB LAB GOB

EMM

LAB

5

12 – 01

L MD

AS D114

L

GOB

BOM

D114

L

RC

AE

D114


7

02 – 03

L

RC

AE

D114

L MA1

BS D114

L

AS

MD

D114

L

AS

`

MD

D114

L

PK

CNC

D 114

8

03 – 04 P

RC

G1

AE

AT

P MAI

G2

BS EMM

P PROJ.

GOB EMM

LAB

L

BS

MAI

D114

P

GOB

LAB

PROJ.

EMM

L

RC

AE

D 114

9 04-05 L SS L MD

LAB LAB HBK D205 AS D114

1. ADS Amandeep Singh 2. AJS Amarjeet singh 3.BS Baljit singh 4. RU RiteshUppal 5. Lk Lakhwinder kaur 6 .Pk Pardeep kumar 7.As Assa singh

MAI AE BOM MD CNC PROJ.

METROLOGY AND

INSTRUMENTATION

AUTOMOBILE

ENGINEERING

BASICS OF

MANAGEMENT

MACHINE DESIGN

CNC MACHINES AND

AUTOMATION

PROJECT WORK

322




Name of Class: 6th Semester, ME Group: D 18


1

08-09

-------------------------

L

BS

MAI

D205

L

HBK

SS

D205

--------------- ---------------

2 09 – 10 L AE L BOM P PROJ. P CNC P MAI P PROJ.

AS D224 AJS D206 AJS

LAB

FM/C G1

AS CNC

LAB

BS

G2

EMM

LAB

AJS

LAB

FM/C

3

10 – 11

L MD

AS D-222

L SS

HBK D222

4

11 – 12

P AE

G1

RC AT

LAB

P CNC

G2

AS CNC

LAB

P AE

G2

RC AT

LAB

P MAI

G1

BS EMM

LAB

L

GOB

BOM

D114

L

AJS

BOM

D222

5

12 – 01 LUNCH LUNCH

L

PK

CNC

D204

6

01-02 LUNCH LUNCH

L

BS

MAI

D114

LUNCH

7

02 – 03

L SS

HBK D222

L MD

AS D222

P

AJS

LAB

PROJ.

EMM

P PROJ.

AJS FM/C LAB

L

AS

MD

D222

8

03 – 04

L CNC

PK D222

L AE

LK D222

L

BS

MAI

D114

L

LK

AE

D 222

9

04-05

L MD

AS D222

L AE

AS D222

L

PK

CNC

D114

L

BS

MAI

D-220

1. ADS Amandeep Singh 2. AJS Amarjeet singh 3.BS Baljit singh 4. RU RiteshUppal 5. LK Lakhwinder kaur 6 .PK Pardeep kumar 7.As Assa singh

MAI AE BOM MD CNC PROJ.

METROLOGY AND

INSTRUMENTATION

AUTOMOBILE

ENGINEERING

BASICS OF

MANAGEMENT

MACHINE DESIGN

CNC MACHINES AND

AUTOMATION

PROJECT WORK

324

Session: Jan June 2017. Department: CE Polytechnic Wing



NAME OF CLASS : 2ND CE GROUP: D1


1

08 to 09

P

SK

DTP

D-209

L

HPK

ECS

D-220

2

09 to 10 L

PN

PHY

D-220

P

HPK

ECS

ECS LAB

L

PN

PHY

D-220

3

10 to 11 L

RAJ

MATH

D-220

L

RKS

BEE

D-220

4

11 to 12 L

HPK

ECS

D-221

L

RAJ

MATH

D-220

L

RAJ

MATH

D-220

L

RAJ

MATH

D-220

5

12 to 01

LUNCH

L

RAJ

MATH

D-220

L

MPS

BE

D-220

LUNCH

L

HPK

ECS

D-221

325

6 01 to 02 P

RKS

BEE

A-116

LUNCH LUNCH L

MPS

BE

A-317

LUNCH

7

02 to 03 L

MPS

BE

D-220

L

RKS

BEE

D-220

P

W/S

WP-II

8

03 to 04 L

MPS

BE

D-220

L

RKS

BEE

D-221

P

PN

PHY

PHY LAB

L

MPS

BE

D-221

9

04 to 05 L

RKS

BEE

D-220

L

PN

PHY

D-220

L

PN

PHY

D-220

1.RAJ- RAJNISH KUMAR 2.PN-POONAM NARANG 3.MPS- MANPREET SINGH 4.RKS-RAJESH SINGLA 5.HPK- HARMANPREET KAUR

6.SK- SAHIL KUMAR

MATH PHY II ECS II BE BEE WPII DTP

MATHEMATICS II

PHYSICS II

ENGLISH &

Communication

SKILLLS II

BASIC ELECTRONICS

BASIC ELECTRICAL

ENGG

WORKSHOP

PRACTICE II

DESKTOP

PUBLISHING

326


Session: Jan June 2017. Time Table-EVEN SEMESTER

Name of Class: 2ND ECE Polytechnic Wing Group: D2 Monday Tuesday Wednesday Thursday Friday

1

08-09

P

GWP-II

W/S

P

AT

BIT

D-209

L

HPK

ECS

D-220

2

09 - 10

L

PN

PHY

D-220

P

HPK

ECS

ECS LAB

L

PN

PHY

D-220

3

10 - 11

L

RAJ

MATH

D-220

L

RKS

BEE

D220

4

11 - 12

L

HPK

ECS

D-221

L

RAJ

MATH

D-220

L

RAJ

MATH

D-220

L

RAJ

MATH

D-220

5

12 - 01

LUNCH

L

RAJ

MATH

D-220

L

MPS

BE

D-220

LUNCH

L

HPK

ECS

D-221

6

01-02

P

RKS

BEE

A-116

LUNCH

LUNCH

P

MPS

BE

A-317

LUNCH

7

02 - 03

L

MPS

BE

D-220

L

RKS

BEE

D-220

P

WP-II

8

03 - 04

L

MPS

BE

D-220

L

RKS

BEE

D 221

P

PN

PHY

PHY LAB

L

MPS

BE

D-221

W/S

9 04-05 L BEE L PHY L PHY

RKS D-220 PN D220 PN D-220

1. HPK-

HARMANPREET KAUR 2.RAJ-RAJNISH KUMAR 3.RKS-RAJESH KUMAR SINGLA 4.PN-POONAM NARANG 5.MPS-MANPREET SINGH 6. AT-ANU THIND

328


1

MATH 08 to 09

PHY II ECS II L BE EC S L BEE C HEM WPII BIT

ATH

EMATICS II

PHYSICS II

B

HPK D-22

ASIC ELECTRONICS

0 B

DK D ASIC ELECTRICAL

-221 W ORKSHOP

BASICS OF INFORMATI

SKILLLS II ENGG PRACTICE II

M

ENGLISH &

Communication ON

TECHNOLOGY


Session: Jan June 2017. Time Table-EVEN SEMESTER

Name of Class: 2ND ME Polytechnic Wing Group: D5


1

08 to 09

L

PN

PHY

D220

P

ADS

ED-II

DH-1 2

09 to 10

P BIT G1

MEENU D-

209

P CHEM G2

DK CHM

LAB

P

GWP II

W/S

L

DK

CHEM

D220

P

ADS

ED-II

DH-1

3

10 to 11

L

D220

MATH RAJ L

PN

PHY

D-221

4

11 to 12

L MATH

D220

RAJ P BIT

G2 MEENU

P ECS

G1

L

HPK

ECS

D-221

329

1.HPK- HARMANPREET KAUR 2.RAJ-RAJNISH KUMAR 3.DK-DALJEET KAUR 4.PN-POONAM NARANG 5.ADS-AMANDEEP SINGH

MATH PHY II ECS II

CHEM II ED II GWPII BIT

MATHEMATICS II PHYSICS II ENGLISH & Communication

SKILLLS II

CHEMISTRY

II ENGINEERING DRAWING II

GENERAL WORKSHOP

PRACTICE II

BASICS OF INFORMATION

TECHNOLOGY

330

5

12 to 01

L

PN

PHY

D-220

LUNCH

D-209 HPK ECS

LAB

LUNCH

L

RAJ

MATH

D-220

6 01 to 02 LUNCH P BIT

G1 MEENU

D-209

P PHY

G2

PN PHY LAB

LUNCH

P BIT G2

MEENU D-

217

P PHY

G1

PN PHY

LAB

LUNCH

7

02 to 03

L

D220

CHEM DK

L

PN

PHY

D-222

P

W/S

GWP II

8

03 to 04

P CHEM

G1 DK

CHE

LAB

P ECS

G2

HPK ECS

LAB

L

RAJ

MATH

D220

L

HPK

ECS

D-220

L RAJ

MATH

D-220

9

04 to 05 L

DK

CHEM

D221

L

HPK

ECS

D-221

L

DK

CHEM

D222

Annexure – VII

Faculty resume (Poly wing)

RESUME

1. Name ANURADHA RANI

2. Designation Principal Polywing

3. Correspondence Address

SBS State Technical Campus,

Moga Road Ferozepur-152004

4. Email/URL [email protected]

4. Phone Contact +91-8288012038

5. Date of Birth/Experience 01-08-1980 / 11.5 Years

6. Educational Qualification M Tech (with distinction) [Pb. Uni., Patiala]

B Tech [PTU, Jallandhar]

7. Area of Specializations Computer Engineering

8. Number of Attended STC One Week: 6 Two Weeks: 2

331


11. Paper Published

Conferences: 03

Journals: 01

332

BRIEF RESUME

1. Name Richa Sawhney

2. Designation

3. Correspondence Address LECTURER COMPUTER ENGINEERING

– POLY WING


(Formerly as SBSCET, Ferozepur)

Moga Road, Ferozepur-152004


4. Phone Contact +91-9463235854

5. Date of Birth/Experience 02-10-1984 / 9 Years

6. Educational Qualification M Tech [PTU, Jallandhar]

B Tech [PTU, Jallandhar]

7.Area of Specializations

8.Number of Attended STC

Computer Engineering

One Week: 6

Two Weeks: 2

9.Paper Published

Conferences: 01

Journals: 01

333


334

BRIEF RESUME

1. Name ANU THIND

2. Designation


Lecturer,Computer Engineering

(Polywing), Shaheed Bhagat Singh

State Technical Campus, (formerly as

SBSCET, Ferozepur)


4. Phone Contact +91-9815498332

5. Date of Birth/Experience 21-8-1992/10 months

6. Educational Qualification M.Tech

7. Area of Specializations Networking

8. Paper Published Journals: 4

335


BRIEF RESUME

9. Name MEENU

2. Designation Lecturer (CE)

Department of Computer Sciences (Poly wing)






5. Phone Contact 9463605921

6. Date of Birth/Experience 25 JULY,1991 /3.5yrs

7. Educational Qualification B.TECH (CSE) , SBSSTC,Ferozepur

336


BRIEF RESUME

1.Name RINKEL MEHTO 2. Designation Lecturer







6. Date of Birth/Experience 12-11-1992 / 6 Months

7. Educational Qualification M. Tech in Computer Science and Engg. [PTU, Jalandhar]

B Tech in Computer science and Engg [PTU, Jalandhar]

8. Area of Specializations NETWORKING

9. Paper Published 5

337


BRIEF RESUME

1. Name SAHIL KUMAR

2. Designation Lecturer,Computer Engineering (Polywing),


Shaheed Bhagat Singh State Technical

Campus, (formerly as SBSCET,

Ferozepur)


5. Phone Contact +91-8283839787

6. Date of Birth/Experience 24-01-1990/4 years

7. Educational Qualification B.Tech

8. Area of Specializations Networking

9. Paper Published Journals: 4

338


1. Name : Mr.Retaish Uppal

2. Date of Birth : 19-03-1986

3. E-mail Id : [email protected]

4. Contact No : +91- 9041503355

5. Education Qualification : B.Tech, M.Tech (pursuing)

6. Work Experience : 9 yrs (Approx.)

a. Teaching : Dec 2010 to till now

b. Industry : 3.5 yrs

7. Area of Specializations : Thermodynamics,Workshop

8. No. of Papers Published in

-National Journals : one

-International Journals : one

9. Short Term Courses : Five attended

339


1. Name: GOBIND

RESUME

2. Designation Deptt. Incharge of Mechanical Engg.

3. Correspondence Address:

SBS State Technical

campus, Polywing,

Ferozepur-152004.

4. Email : [email protected]

5. Phone Contacts: +91-9876949831

6. Date of Birth: 01.07.1984

7. Educational Qualification: M-Tech. [P.T.U., Jalandhar],

M.B.A [P.T.U., Jalandhar],

B-TECH. [P.T.U., Jalandhar]

Three Times GATE Qualified

8. Total Work Experience: 9 Years

9. Area of Specializations: Production Management & Operations Research.

10. No. of papers: 15 [Total]

340


06 [Conferences]

9 [International Journal]

11. No. of FDP Attended : 13

341

1. Name GURJEEVAN SINGH 2. Designation Lecturer & Deptt. Incharge

Department of ECE (Poly wing)





4. Email/URL [email protected], [email protected]

4. Phone Contact +91-8288012036, +91-9872644135

8. Date of Birth/Experience 12-10-1985 / 09 Years 06 Months.

6. Educational Qualification M-Tech [2011] [Punjab Technical University, Jalandhar]

B-Tech. [2007] [Punjab Technical University, Jalandhar]

7. Professional Memberships IAENG: Member, ISTE Life Member.

8. Area of Specializations

Network Security, Wireless Communication, MANETs and

Zigbee Sensor Networks.

342



9. Number of Attended STC One Week: 14 Two Weeks: 04

10. Number of Invited Talks 03

11. Paper Published Conferences: 08 Journals: 28

13. M.Tech. Guidance

Completed: 11

343

BRIEF RESUME

1. Name HARLEEN KAUR

10. Designation Lecturer.

Deptt. of ECE

polywing

11. Correspondence Address SBS State Technical Campus,

(Formerly as SBSCET,

Ferozepur) Moga Road,

Ferozepur-152004



14. Date of Birth/Experience 05-12-1991 / 1Year & 1month

15. Educational Qualification

M. Tech in Electronics & communication Engg. (with

distinction) [PTU, Jalandhar]

B. Tech in Electronics & communication Engg. (with

distinction) [PTU, Jalandhar]

16. Area of Specializations Wireless communication & Optics

344



345

BRIEF RESUME

1. Name MANDEEP KAUR 2. Designation Lecturer Deptt. Of ECE PolyWing






5. Phone Contact 80548-67854

6. Date of Birth/Experience 14-05-1992 / 1 year 5 months


M. Tech in Electronics and Communication Engg. [PTU,

Jalandhar]

B. Tech in Electronics and Communication Engg. [PTU,

Jalandhar]

8. Area of Specializations VLSI


346


BRIEF RESUME

1. Name ARSHDEEP SINGH

2.Designation Lecturer. Electrical

Deptt. of EE

polywing

3.Correspondence Address Lecturer. Electrical

Deptt. of EE

polywing




Ferozepur-152004

4.Email/URL [email protected]


6. Date of Birth/Experience 01-01-1993/ 6 month

7. Educational Qualification B Tech Electrical Engg.[PTU, Jalandhar]

M Tech Electrical Engg.[PTU, Jalandhar] Pursuing

8. Area of Specializations Electrical Machine

347


1. Name DEEPAK KUMAR

2. Designation Lecturer. Electrical

Deptt. of EE polywing


SBS State Technical

Campus, (Formerly as

SBSCET, Ferozepur)




6. Date of Birth/Experience 24-11-1985 / 4Years 6 Month

7. Educational Qualification B Tech Electrical Engg.[PTU, Jalandhar]

M-Tech Power Engg. Pursuing

8. Area of Specializations Power Electronics,


348


BRIEF RESUME

1 Name RAHUL SHARMA 2 Designation Lecturer. & Deptt. Incharge


3 Correspondence Address




4 Email/URL [email protected]

5 Phone Contact 97804-04860

6 Date of Birth/Experience 20-07-1986 / 7Years

7 Educational Qualification M. Tech in Electrical Engg. [PTU, Jalandhar]

B Tech (with distinction) [PTU, Jalandhar]

349


8 Area of Specializations Power System, Electrical Machines

9 Number of Attended STC One Week: 05 Two Weeks: 02

10 Paper Published 3

350

BRIEF RESUME

1 Name RAJNISH KUMAR 2 Designation Lecturer (Maths) & Deptt. Incharge

Department of Applied Sciences (Poly wing)

3 Correspondence Address





4

Phone Contact

+91-9417384845

5

Date of Birth/Experience

22ND SEP. 1977 /12 years (Teaching)

6

Educational Qualification

MSc (Mathematics) GNDU , Amritsar

UGC-NET, Qualified

GATE, Qualified

7

Area of Specializations

Pure Mathematics

8

Number of Attended STC

One Week: 03

Two Weeks: 04

351

BRIEF RESUME


1. Name POONAM

2. Designation Lecturer (Physics)

Department of Applied Sciences (Poly

wing)

3.Correspondence Address






6. Date of Birth/Experience 23 FEB,1989 /5yrs

7. Educational Qualification MSc (Physics) ,D.A.V ,Jallandhar.

8. Area of Specializations Physics

9. Number of Attended STC 01

352


BRIEF RESUME

1.Name DALJEET KAUR

2. Designation Lecturer (Chemistry)

Department of Applied

Sciences (Poly wing)

3.Correspondence Address

SBS State Technical

Campus, (Formerly as

SBSCET, Ferozepur) Moga

Road, Ferozepur-152004

4.Email/URL [email protected]


6. Date of Birth/Experience 26 APRIL 1992/1yr2mnths


MSc (Chemistry),B.Ed, PU , Chandigarh

353


BRIEF RESUME

1. Name HARMANPREET KAUR 2. Designation Lecturer (English)

Department of Applied Sciences (Polywing)

3. Correspondence

Address

Shaheed Bhagat Singh State

Technical Campus, (formerly as

SBSCET, Ferozepur)


5. Phone Contact +91-9780110319

6. Date of Birth/Experience 13-8-1989/6 months

7. Educational Qualification M.A. English

8. Area of Specializations Communications Skills & English Literature

354


BRIEF RESUME

1. Name : Mr.Ajay Kumar

2. Date of Birth : 29-06-1986

3. E-mail Id : [email protected]

4. Contact No : +91- 9876036912

5. Education Qualification : B.Tech, M.Tech

6. Work Experience : 9 yrs (Approx.)

7. Area of Specializations :Wireless Networking & Manet

8. No. of Papers Published in :total-7

-National Journals : two

-International Journals : four

-International Conferences : one

9. Short Term Courses : Six

355


BRIEF RESUME

1. Name RAJESH KUMAR SINGLA

2. Designation Lecturer. Electrical






4. Email/URL [email protected]@yahoo.co.in


6. Date of Birth/Experience 29th Dec. 1984/5.5years (Teaching) & 2.5 years (Industry)

7. Educational Qualification M-Tech. (Pursuing), P.T.U., Jalandhar

B-Tech. (2007), P.T.U., Jalandhar

8.Area of Specializations Power System, Electrical Machine

9.Number of Attended STC One Week: Three Two Weeks: 03

356



1. Name MANPREET SINGH

2. Designation Lecturer ECE (Polywing)

2 Correspondence Address SBS State Technical

Campus,



Ferozepur-152004


4 Phone Contact +91-9779077422

5

Date of Birth/Experience

14th July 1987/ 6 years (Teaching) & 1 year (Industry)

6

Educational Qualification

M-Tech.(2016) , P.T.U. , Jalandhar

B-Tech. (2009), P.T.U., Jalandhar

Diploma (2006), PSBTE, Chd

7

Area of Specializations

MANET

8

Number of Attended STC

One Week: 3

Two Weeks: 02

11 Paper Published

Journals: 2

357


BRIEF RESUME

1. Name SIMARPREET KAUR

2. Designation Lecturer.

Deptt. of ECE polywing







6. Date of Birth/Experience 01-06-1993 / 6 Months

7. Educational Qualification M. Tech in Electronics and Communication Engg. [PTU,

Jalandhar]

B Tech in Electronics and Communication Engg [PTU,

Jalandhar]

8. Area of Specializations VLSI

358


9. Number of Attended STC One Week: 00


359

BRIEF RESUME

1. Name AMANDEEP SINGH

2. Designation Lecturer. Mechanical

Deptt. of ME

polywing

3. Correspondence Address SBS State Technical Campus,



Ferozepur-152004



6. Date of Birth/Experience 01-01-1989 / Nil

7. Educational Qualification B Tech Mech Engg.[PTU, Jalandhar]

Pursuing M-Tech Mech Engg. [Punjabi Univarsity]

8.Area of Specializations Mechanical


360


BRIEF RESUME

1. Name Amarjeet Singh Sandhu

2. Correspondence Address Lecturer

Deptt. of ME Polywing






5. Date of Birth/Experience 21-04-1989/ 04 Years

Educational Qualification B. Tech in Mechanical Engg. [PTU, Jalandhar]

8. Area of Specializations Mechanical



361


BRIEF RESUME

1. Name ASSA SINGH

2. Correspondence Address Lecturer. Mechanical

Deptt. of ME

polywing




Ferozepur-152004



5. Date of Birth/Experience 20-09-1991 / 01 Year

6. Educational Qualification B Tech Mech Engg.[PTU, Jalandhar]

M-Tech Mech Engg. [Punjabi Univarsity]



362


BRIEF RESUME

1. Name Lakhwinder

2. Correspondence Address Lecturer

Deptt. of ME Polywing




[email protected]

3. Email/URL


5. Date of Birth/Experience 06-01-1990/ 03 Years

6. Educational Qualification B. Tech in Mechanical Engg. [PTU, Jalandhar]

o Tech in Mechanical Engg [PTU, Jalandhar]




363


BRIEF RESUME

1. Name : Kamal Khanna

2. Correspondence Address – Deptt. of Mechanical Engg. SBSSTC,Ferozepur 152004


4. Personal URL: Nil

5. Phone Contacts :- +91-9501025533

6. Educational Qualification: Phd(Persuing)

M.tech, Btech in ME

7. Professional Memberships: IAENG(Member), ISTE

8. Total Work Experience:7 yrs

9. Area of Specializations:

Supply Chain

Management,Operation

Research

10. No. of papers: 13

11. No. STC Attened: 20

12. No. of M.Tech. Scholars: 2

13. No. Of Expert Talk: 3

364


BRIEF RESUME

1. Name : Chetan Batra

2. Correspondence Address – Street No.7,Dhawan Colony Ferozepur City,Ferozepur Pin-152002

3. Email :- [email protected]

4. Phone Contacts :- 08288006444

6. Date of Birth :- 01.02.1990

7. Educational Qualification:- M.tech (CSE)

B.Tech (CSE)

8. Total Work Experience: 4.5 Years

9. Area of Specializations: Networking 365


10. No. of papers: 05

11. No. of STC Attended: 02 366

BRIEF RESUME 1. Name : Vishal Singla

2. Correspondence Address – H.no 98, New Ward 4c near panchyati gurudwara Malgodawn Road Dhuri-148024 Distt. Sangrur

.


4. Phone Contacts :- 8146900160

5. Date of Birth : 07.08.1993

6. Educational Qualification: Diploma, B.TECH,

7. Total Work Experience: 6 months

8. Area of Specializations: Power Systems

367


BRIEF RESUME

1. Name : BALJIT SINGH

2.Correspondence Address – NEAR SBSSTC, VILLAGE ALEWALA FEROZEPUR CANTT.


4. Phone Contacts : 9988446122

5. Date of Birth : 22.12.1985

6.Educational Qualification B.TECH, M.TECH

7.Professional Memberships

ISTE LIFETIME MEMBER

8.Total Work Experience 7 Yrs

9.Area of Specializations

MATERIAL AND

COATING

368


Documents

Mandatory Disclosure - SBS STCsbsstc.ac.in/PDFs/MandatoryNew2017.pdfMandatory Disclosure (For the year 2017- 18) Submitted by SHAHEED BHAGAT SINGH STATE TECHNICAL CAMPUS 2 AICTE File