Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
MALTESEGLAZED PORCELAIN FLOOR & WALL TILE
MalteseDP is a beautiful floor and wall collection by Florida Tile. Inspired by a traditional limestone look, with small characteristic pits and slight veining but with our own unique twist. Using Florida Tile’s proprietary DP-Digital Printing technology we are able to create a superior natural stone look with the high shade variation and graphic resolution far beyond previous applications. With a nod to the modernist style of mid-century American Designers like Philip Johnson and Charles Eames, the minimalistic yet warm aesthetics of the MalteseDP make it the perfect backdrop for the style conscious. A versatile line, at home in a midwestern suburb, bank lobby, or boutique hotel the elegant look of limestone coordinates so well with any style.
Earthy colors Porto Cream and Roman Gray are rendered in the smooth natural finish of these porcelain floor and ceramic wall tiles. Decorative accents include an 25 piece mosaic and bullnose. With the exception of select trim, decorative, and ceramic pieces, this product line is Made in the USA of 40% pre-consumer recycled content, is GREENGUARD® and Porcelain Tile Certified, and meets the DCOF AcuTest® requirements to be installed in wet areas.
MALTESEshown on front: 29615 12x24 Roman Gray
below: 29622 18x18 Porto Cream
29622 12x12
29615 12x12
29622 18x18
29615 18x18
29622/M12 25pc Mosaic
29615/M12 25pc Mosaic
29622 12x24
29615 12x24
29622/CR2x10 & CRS2x1 Chair Rail & Chair Rail Stop
29615/CR2x10 & CRS2x1 Chair Rail & Chair Rail Stop
PORTO CREAM
ROMAN GRAY
#48862R 10/19
above: 29622 18x18 Porto Cream
Bullnose P43C9 3x12 7.5x30
MALTESE
Color Variation
www.floridatile.comis a registered trademark in the U.S. of Florida Tile, Inc.© 2019
V2 Slight Variation Clearly distinguishable differences in texture and/or pattern with similar colors.
DCOF AcuTest®2 A137.1 ≥0.42 Pass
Porcelain Technical DataProperties (Floor)
ASTM® ANSI® Results¹
Surface Hardness
Break Strength
Water Absorption
Intended Use4
Mohs Scale
C-648
C-373
N/A
N/A
250 lbf.
≤0.5%
N/A
7 Mohs
≥ 389 lbf. avg.
≤ 0.5%3
Residential & Light Commercial
1 These tests are performed by a 3rd party testing lab using industry standard equipment and techniques. Values are offered in good faith as being accurate and typical of normal production. Due to the natural variation of raw materials and manufacturing processes, the values of the purchased product for any particular installation may vary.2 ANSI® A137.1 standard, ceramic tiles selected for level interior spaces expected to be walked upon when wet must have a minimum wet DCOF AcuTest® value of 0.42.3 Average production value4 Please visit www.floridatile.com/intended-use for further details.
MalteseDP glazed porcelain floor tile is appropriate for all residential and commercial wall, countertop, and backsplash applications, all residential and most commercial floor applications.
Notice: Not all flooring products are suitable for wet areas, specialized applications or commercial use. Please refer to the American National Standard Specifications for Ceramic Tile (ANSI® A137.1) for ceramic, stone, and glass installation for specific usage and installation information.
Made in USA: With the exception of select trim, decorative, and ceramic pieces, this product line is Made in the USA of 40% pre-consumer recycled content, is GREENGUARD® Certified and Porcelain Tile Certified, and meets the new DCOF AcuTest® requirements to be installed in wet areas.
This Florida Tile product will contribute to USGBC LEED® points and the ANSI® approved NAHB® Green Building Points.
Typical Uses
Color reproductions in this printed piece may vary from actual tile colors.Final selection should be made from actual tile samples.
Color, texture, and finish variations may occur due to the nature of the product.
12x12
12x24
18x18
30x30
30x60
45x45
1
.5
.44
8mm
9mm
8.5mm
1 These values may vary from lot to lot. 2 These values are based on actual sizes including the grout joint. 3 May not apply to textured surfaces or tiles with uneven back patterns such as mesh mounted mosaics.
Field TileNominal Size (in)¹ Metric (cm) Pcs./Sq Ft2 Thickness3
Pressed
Pressed
Pressed
Edge
Trim Metric (cm)Nominal Size (in)Shape Sku