MAKERBOT FILAMENTkirmico.com/wp-content/uploads/2016/10/MakerBot-Filament...• MakerBot ABS Filament is the best, most consistent, and most tested ABS filament for MakerBot Replicator

page 1A Stratasys GmbH - MakerBot Division · Airport Boulevard B 120 · 77836 Rheinmünster, Germanyw eu.makerbot.com/filament · T +49 7229.7772.999 · E [email protected]

True Black Small Spool — 0.2kg True Black Large Spool — 0.9kg

True White Small Spool — 0.2kg True White Large Spool — 0.9kg

True Red Small Spool — 0.2kg True Red Large Spool — 0.9kg

MAKERBOT® FILAMENT

PLA | ABS | FLEXIBLE | DISSOLVABLE

THE IDEAL BUILD MATERIAL FORYOUR MAKERBOT 3D PRINTER.

MakerBot PLA Filament - SIZE S (Replicator Mini)

MakerBot PLA Filament - SIZE L (Replicator 5th Gen + Replicator 2 + Replicator Z18)


True Green Small Spool — 0.2kg True Green Large Spool — 0.9kg

True Orange Small Spool — 0.2kg True Orange Large Spool — 0.9kg

True Blue Small Spool — 0.2kg True Blue Large Spool — 0.9kg

True Yellow Small Spool — 0.2kg True Yellow Large Spool — 0.9kg




True Brown Small Spool — 0.2kg True Brown Large Spool — 0.9kg

True Purple Small Spool — 0.2kg True Purple Large Spool — 0.9kg

Cool Gray Small Spool — 0.2kg Cool Gray Large Spool — 0.9kg

Warm Gray Small Spool — 0.2kg Warm Gray Large Spool — 0.9kg




Natural Small Spool — 0.2kg Natural Large Spool — 0.9kg

Light Brown Small Spool — 0.2kg Light Brown Large Spool — 0.9kg

Peach Small Spool — 0.2kg Peach Large Spool — 0.9kg

Khaki Small Spool — 0.2kg Khaki Large Spool — 0.9kg




Army Green Small Spool — 0.2kg Army Green Large Spool — 0.9kg

Ocean Blue Small Spool — 0.2kg Ocean Blue Large Spool — 0.9kg

Neon Green Small Spool — 0.2kg Neon Green Large Spool — 0.9kg

Neon Orange Small Spool — 0.2kg Neon Orange Large Spool — 0.9kg




Neon Pink Small Spool — 0.2kg Neon Pink Large Spool — 0.9kg

Translucent Blue Small Spool — 0.2kg Translucent Blue Large Spool — 0.9kg

Translucent Red Small Spool — 0.2kg Translucent Red Large Spool — 0.9kg

Translucent Orange Small Spool — 0.2kg Translucent Orange Large Spool — 0.9kg




Translucent Green Small Spool — 0.2kg Translucent Green Large Spool — 0.9kg

Translucent Purple Small Spool — 0.2kg Translucent Purple Large Spool — 0.9kg

Translucent Yellow Small Spool — 0.2kg Translucent Yellow Large Spool — 0.9kg

Glow in the Dark Small Spool — 0.2kg Glow in the Dark Large Spool — 0.9kg




MakerBot PLA Filament - SIZE XL and XXL (Replicator Z18)

True Black XL Spool True Black XXL Spool

True White XL Spool True White XXL Spool

Cool Gray XL Spool Cool Gray XXL Spool

Warm Gray XL Spool Warm Gray XXL Spool


MakerBot ABS Filament - SIZE L (Replicator 2X)

True Black L Spool — 1.0kg True White L Spool — 1.0kg

True Red L Spool — 1.0kg True Blue L Spool — 1.0kg

True Green L Spool — 1.0kg True Orange L Spool — 1.0kg

True Purple L Spool — 1.0kg True Yellow L Spool — 1.0kg


MakerBot ABS Filament - SIZE L (Replicator 2X)

True Grey L Spool — 1.0kg Natural L Spool — 1.0kg

MakerBot Flexible Filament - SIZE L (Replicator 2)

Flexible Filament L Spool

Dissolvable Filament - SIZE L (Replicator 2X)

Dissolvable Filament L Spool


MAKERBOT® FILAMENTTHE IDEAL BUILD MATERIAL FOR YOUR 3D PRINTER

MAKERBOT: SETTING THE STANDARD IN DESKTOP 3D PRINTING

PLA

TEMPERATURES60 - 65° C (140 - 149° F)

MELTING TEMPERATURES150 - 160° C (302 - 320° F)

NOZZLE TEMPERATURE230° C (446° F)

DIAMETER1.75 mm

ABS

GLASS TEMPERATURE105° C (221° F)

MELTING TEMPERATURESAmorphous, no “true” melting point

NOZZLE TEMPERATURES230° C (446° F)

DIAMETER1.75 mm

FLEXIBLE


MELTING TEMPERATURES58 - 60° C (136.4 - 140° F)


DIAMETER1.75 mm

DISSOLVABLE


MELTING TEMPERATURES160° C (320° F)


DIAMETER1.75 mm

SPECIFICATIONS

MAKERBOT® FLEXIBLE FILAMENT

• More flexible than MakerBot PLA filament.• Creates new opportunities to stretch the limits of 3D printing.• Reshape and mold your prints.• MakerBot Flexible Filament is the most flexible filament for MakerBot Replicator 2

Desktop 3D Printers.

MAKERBOT® DISSOLVABLE FILAMENT

• MakerBot Dissolvable Filament is the best, most consistent, and most tested dissolvable filament for MakerBot Replicator 2X Experimental 3D Printers.

• MakerBot Dissolvable Filament is the best, most consistent, and most tested dissolvable filament for MakerBot Replicator 2X Experimental 3D Printers.

• An excellent dissolvable support structure for MakerBot ABS Filament designed for use as a solid infill material.

• Easily dissolves in limonene bath in just 8-24 hours.

MAKERBOT® ABS FILAMENT

• MakerBot ABS Filament is the best, most consistent, and most tested ABS filament for MakerBot Replicator 2X Experimental 3D Printers.

• Can be used with MakerBot Dissolvable Filament. MakerBot dissolvable filament acts as a solid infill material.

MAKERBOT® PLA FILAMENT

• MakerBot PLA Filament is the best, most consistent build material for MakerBot® Replicator® 3D Printers.

• Bioplastic derived from corn.• Consistently round diameter – ensures highest print quality and consistent flow

through the extruder nozzle.• Prevents shredding.

ABOUT MAKERBOT FILAMENT

• Optimized to be the best filament for MakerBot Replicator 3D Printers.• Every filament color is comprehensively quality tested at both high (100 micron)

and medium (200 micron) layer resolutions to verify that the filament will perform every feature that MakerBot Desktop software offers and will reliably slice and print every type of printing (tight corners, long and short overhangs, floors, ceilings, etc.).

• Every filament color also undergoes long duration testing using a large 3D model that requires 18 – 24 hours of print time to ensure that there are no deviances in print quality.

• Every millimeter of MakerBot Filament has been subjected to stringent laser testing• High viscosity to prevent dripping from the extruder nozzle.• Packaged on spools to prevent tangles and “bird nests.”

Description Item Code Price

PLA - Natural - Large [0,9kg] MP05612 50.00 €

PLA - Translucent Blue - Large [0,9kg] MP05758 70.00 €

PLA - Translucent Green - Large [0,9kg] MP05760 70.00 €

PLA - Translucent Red - Large [0,9kg] MP05762 70.00 €

PLA - Translucent Orange - Large [0,9kg] MP05764 70.00 €

PLA - Translucent Yellow - Large [0,9kg] MP05766 70.00 €

PLA - Translucent Purple - Large [0,9kg] MP05768 70.00 €

PLA - True Black - Large [0,9kg] MP05775 50.00 €

PLA - True Blue - Large [0,9kg] MP05776 50.00 €

PLA - True Orange - Large [0,9kg] MP05777 50.00 €

PLA - True Purple - Large [0,9kg] MP05778 50.00 €

PLA - True Red - Large [0,9kg] MP05779 50.00 €

PLA - True White - Large [0,9kg] MP05780 50.00 €

PLA - True Yellow - Large [0,9kg] MP05781 50.00 €

PLA - Warm Gray - Large [0,9kg] MP05783 50.00 €

PLA - Cool Gray - Large [0,9kg] MP05784 50.00 €

PLA - True Green - Large [0,9kg] MP05952 50.00 €

PLA - Glow in the Dark - Large [0,9kg] MP05785 135.00 €

PLA - True Brown - Large [0,9kg] MP06639 50.00 €

PLA - Khaki - Large [0,9kg] MP06103 50.00 €

PLA - Army Green - Large [0,9kg] MP06101 50.00 €

PLA - Neon Pink - Large [0,9kg] MP06048 70.00 €

PLA - Peaches - Large [0,9kg] MP06637 50.00 €

PLA - Light Brown - Large [0,9kg] MP06638 50.00 €

PLA - Neon Green - Large [0,9kg] MP06052 50.00 €

PLA - Ocean Blue - Large [0,9kg] MP06102 50.00 €

PLA - Neon Orange - Large [0,9kg] MP06050 70.00 €

PLA - True Red - Small [0,22kg] MP05789 20.00 €

PLA - True Blue - Small [0,22kg] MP05796 20.00 €

PLA - True Yellow - Small [0,22kg] MP05791 20.00 €

PLA - Glow in the Dark - Small [0,22kg] MP05795 50.00 €

PLA - True Green - Small [0,22kg] MP05951 20.00 €

PLA - True Brown - Small [0,22kg] MP06642 20.00 €

PLA - Khaki - Small [0,22kg] MP06117 20.00 €

PLA - Natural - Small [0,22kg] MP05792 20.00 €

PLA - True White - Small [0,22kg] MP05790 20.00 €

PLA - True Orange - Small [0,22kg] MP05787 20.00 €

PLA - True Black - Small [0,22kg] MP05823 20.00 €

PLA - True Purple - Small [0,22kg] MP05788 20.00 €

PLA - Cool Gray - Small [0,22kg] MP05794 20.00 €

Compatible with MakerBot Replicator 2, Makerbot Replicator Mini, MakerBot Replicator Z18

MakerBot PLA filament: 0,2kg spools (small)

MakerBot Filaments

MakerBot PLA filament: 0,9kg spools (large)Compatible with MakerBot Replicator 2, MakerBot Replicator 5th Gen, MakerBot Replicator Z18

PLA - Neon Pink - Small [0,22kg] MP06049 28.00 €

PLA - Peach - Small [0,22kg] MP06640 20.00 €

PLA - Translucent Red - Small [0,22kg] MP05763 28.00 €

PLA - Warm Gray - Small [0,22kg] MP05793 20.00 €

PLA - Army Green - Small [0,22kg] MP06115 20.00 €

PLA - Light Brown - Small [0,22kg] MP06641 20.00 €

PLA - Neon Green - Small [0,22kg] MP06053 28.00 €

PLA - Ocean Blue - Small [0,22kg] MP06116 20.00 €

PLA - Translucent Blue - Small [0,22kg] MP05759 28.00 €

PLA - Translucent Yellow - Small [0,22kg] MP05767 28.00 €

PLA - Translucent Green - Small [0,22kg] MP05761 28.00 €

PLA - Neon Orange - Small [0,22kg] MP06051 28.00 €

PLA - Translucent Orange - Small [0,22kg] MP05765 28.00 €

PLA - Translucent Purple - Small [0,22kg] MP05769 28.00 €

PLA - True White - XL [2,26kg] MP06234 120.00 €

PLA - True Black - XL [2,26kg] MP06233 120.00 €

PLA - Cool Gray - XL [2,26kg] MP06236 120.00 €

PLA - Warm Gray - XL [2,26kg] MP06235 120.00 €

PLA - True White - XXL [4,53kg] MP06238 230.00 €

PLA - True Black - XXL [4,53kg] MP06237 230.00 €

PLA - Cool Gray - XXL [4,53kg] MP06228 230.00 €

PLA - Warm Gray - XXL [4,53kg] MP06239 230.00 €

ABS - True Red - Normal [1kg] MP01971 50.00 €

ABS - True Gray - Normal [1kg] MP02915 50.00 €

ABS - True Blue - Normal [1kg] MP01973 50.00 €

ABS - True Yellow - Normal [1kg] MP01975 50.00 €

ABS - True Green - Normal [1kg] MP01972 50.00 €

ABS - Natural - Normal [1kg] MP01968 46.00 €

ABS - True White - Normal [1kg] MP01970 50.00 €

ABS - True Black - Normal [1kg] MP01969 50.00 €

ABS - True Purple - Normal [1kg] MP02901 50.00 €

ABS - True Orange - Normal [1kg] MP01978 50.00 €

Flexible Filament - Normal [1kg] MP05188 135.00 €

MakerBot ABS filament: 1kg spoolsCompatible with MakerBot Replicator 2X

MakerBot special filament: 1kg spoolsCompatible with MakerBot Replicator 2X

MakerBot PLA filament: 4,5kg spools (XXL)Only usable with external filament spool holder, e.g. MakerBot Replicator Z18 Filament Case / MP06133.

Compatible with MakerBot Replicator 2, Makerbot Replicator Mini, MakerBot Replicator 5th Gen,

MakerBot PLA filament: 2,27kg spools (XL)Only usable with external filament spool holder, e.g. MakerBot Replicator Z18 Filament Case / MP06133.

Compatible with MakerBot Replicator 2, Makerbot Replicator Mini, MakerBot Replicator 5th Gen,

Dissolvable Filament - Normal [1kg] MP05417 70.00 €

Plastic Build Plate (No Logos / Plain) (Rep 2) MP03190 58.00 €

Precut Blue Tape (Rep 2) (Pck - 10St) MP06082 17.00 €

Precut Kapton Tape (Rep 2x) (Pck - 10St) MP06713 45.00 €

Glass Build Plate (Rep 2) MP05466 253.00 €

Build Plate (Rep Z18) MP06627 143.00 €

Printer Grease Packets (Qty. 3) MP06628 17.00 €

MakerBot Replicator Build Plate (5th Gen) MP06681 106.00 €

MakerBot Replicator mini Build Plate MP06682 53.00 €

Precut Build Plate Tape (Z18) (Pck - 4St) MP06626 117.00 €

MakerBot Replicator Z18 Filament Cart MP06134 1,170.00 €

MakerBot Replicator Z18 Filament Case MP06133 240.00 €

Precut Blue Tape (5th Generation) (Pck - 10St) MP06077 17.00 €

Precut Blue Tape (Mini) (Pck - 10St) MP06460 17.00 €

Compatible with MakerBot Replicator 2

MakerBot Accessories

MakerBot special filament: 1kg spools

Documents

MAKERBOT FILAMENTkirmico.com/wp-content/uploads/2016/10/MakerBot-Filament...• MakerBot ABS Filament is the best, most consistent, and most tested ABS filament for MakerBot Replicator