Turning Rolls, Welding Manipulators

& Positioners,Over 40 Welders

& Plasmas

(13) Bridge Cranes, CNC Plasma

System, Shear, Press Brake

Seam Welders, Angle Rolls,

(3) Plate Rolls, Up to 2" Cap.Inspection: Wednesday, November 9

9:00 A.M. to 4:00 P.M.

“Rock Solid Accelerated Marketing Strategies”

In Association WithSee it at: www.stoneauctioneers.comA 14% Buyer’s Premium Applies

61 Lakeview Lane, Carrollton, AL 35447 / Ph: 205 373 1130 / Mike Stone, CAI, AARE, GPPA, Broker/Auctioneer / Buyers Premium AppliesLicenced in AL 1446, GA 002910, TN 5856-Frm 4960, KY 2714, MO 75022, FL 050568488, IL 1274, TX 13964, MS 750-Frm 1070F, NC 8694

Thursday, November 10 at 10:00 A.M.

Company Closed, Total Sell-OutMajor Vessel Builder, Fabricator & Erector

625 E. Carrie Avenue, St. Louis, Missouri 75022

Kickham Boiler & Engineering

2 3

CNC PLASMA PRESS BRAKE

ANGLE ROLL

RADIAL DRILL

PACIFIC Hydraulic Press Brake, Mdl. K300-12, 300-ton x 12' cap., 10'5.5" DBH, 12" stroke, 30 HP, SN UK.

MG MESSER Gemini CNC Cutting Machine, 10' x 40' cap., Galt water table, Hypertherm Max 200 power unit, 200 amp, SN 73002; Hypertherm Max 100 power supply, 100 amp, SN 70-3678 (not currently installed); punch marker, (2) plasma heads, (2) oxy heads, pilot control, SN 3672.

AMERICAN Radial Arm Drill, 5' arm x 13" column, SN 67342.

SHEAR

CINCINNATI Power Squaring Shear, Mdl. 4310, 10' x 1/2" cap., 30" fingers, 102" squaring arm, 6' electric sheet stock feeder, 11'6" in/out roller table, SN 27905. <

BUFFALO MDL. #2- VDR Vertical Angle Bending Roll, 4' x 4' x 5/8" cap.

FIT-UP ROLLS

Fit-Up Rolls, 90" x 192", 11" diameter.

2 TO BE SOLD

5 FIT-UP ROLLS TO BE SOLD

300-TON X 12' CAP.

10' X 40'

2 3

PLATE ROLLS

BERTSCH Initial Pinch Roll, Mdl. 24, 10' x 2" cap., 100 HP main motor, 50 HP aux. motor, 225-lb., G.E. Electric controls, SN M10273, motor upgrade 2011.

WEBB Initial Pinch Bending Roll, Mdl. 9L, 10' x 5/8" cap., w/powered cradle, SN 65123.

BERTSCH Initial Pinch Bending Rolls, Mdl. 8, 6' x 3/8" cap., 10 HP main motor, 5 HP aux. motor, SN 6113.

WELDING MANIPULATORS

ARONSON Welding Manipulator, Mdl. S12VRA12CL-CKVJ-58, 1,100-lb. cap., horizontal travel 144", 162" max., 18" min., vertical travel 144", 172" max., 28" min., track mounted, w/new Lincoln NA-3N sub arc control, SN 78195.

ARONSON Welding Manipulator, Mdl. 510VRA10CL-PK-KB. 600-lb. cap., horizontal travel 120", 138" max., 18" min., vertical travel 120", 160.5" max., 40.5" min., caster mounted, w/new Lincoln NA-3N sub arc control, SN 7584.

Many Items Not Pictured – See it a l l at :

www.stoneauctioneers.com

2" CAPACITY

UPDATED CONTROLS

UPDATED CONTROLS

4 5

PANDJIRIS Welding Positioner, Mdl. 30-6, 30' x 30" table, 18,000-lb. max. load torque, 35,250-lb. tilt, SN 400-3825.

WELDING POSITIONERS & GRIPPERS

PANDJIRIS Welding Positioner, Mdl. 30-6 BTJ, 30" x 30" table, 18,000-lb. max. load torque, 35,250-lb. tilt, SN 800-3508-22.

ARONSON Welding Positioner, Mdl. HD60A, 48" x 48" table, 72,000-lb. max. load torque, 123,000-lb. tilt, SN 82582.

SEAM WELDERS

Local Manufactured Sub-Arc Seam Welder, 15' max. clearance, 35' horizontal travel, 7' vertical travel.

Local Manufactured Sub Arc Seam Welder, 172" overall length, 8' horizontal travel w/Lincoln LN8 feed.

PANDJIRIS Longitudinal Seam Welder, Mdl. 120-1/50-FS, 120" weld length, .020–3/8" material thickness, SN 600-4179 w/Lincoln SA800 DC welder, SN A-534939.

PANDJIRIS Gripper, Mdl. C-60, 3-jaw, 3–60" OD, 7–68" ID, 770-lb., SN 800-908H.

3 GRIPPERS TO BE SOLD

Live Onsite & Live Online

SAWS

GROB Vertical Bandsaw, Mdl. HS24, 24" cap. w/extension table, SN 361. BROBO Super 25 Cold Cut-Off Saw. Abrasive Cut-Off Saw, 20" cap., 15 HP.

4 5

PLATE BEVELERS

TURNING ROLLS

PANDJIRIS Power Roll, Mdl. MM-15PR and (2) idle rolls, Mdl. MT5T, 15-ton turning cap., 5-ton weight cap.(5) PANDJIRIS Power Rolls, Mdl. MM-15PR and (1) idle roll, 15-ton turning cap., 5-ton weight cap.

< (2) Large PANDJIRIS Mdl. PR100/34 Power Rolls and (2) Idle Rolls, 50-ton turning cap., 17-ton weight cap.

PANDJIRIS Power Roll and Idle Roll, Mdl. MM-30TR, 30-ton turning cap., 15-ton weight cap., SN 18335X17-1, 2015.

GULLCO Portable Beveler, Mdl. GBM-25, .25–2" material, 1" bevel, 30 deg. standard bevel angle, 35" table to plate, VS, SN 106596.GULLCO Portable Beveler, Mdl. GBM-15, .59" bevel, 120 IPM, 11 RPM, 4 HP, SN 92024. (3) H&M Pipe Beveling Saddles. PROTEM Pipe Beveler, Mdl. US88, pneumatic.

30-TON CAPACITY 6 SETS TO BE SOLD

2 SETS TO BE SOLD

3 AVAILABLE

FABRILINE Hydraulic Angle Shear, Mdl. PAS66E, 6' x 6' cap., SN 10350.

(2) Hydraulic Flange and Webb Punches, 60-ton cap., SN FA50280, SN UK.

ANGLE & BEAM PROCESSING

2 AVAILABLE

Thursday, November 10at 10:00 A.M. Inspection:

Wednesday, November 9 9:00 A.M. to 4:00 P.M.

2015

PLATE BEVELER

6 7

LINCOLN Commander 500 Welder/Generator, Mdl. K-1639-2, stick and wire, tandem-axle trailer mounted, diesel, SN U10000935543.LINCOLN Commander 400 Welder/Generator, Mdl. K-1422-2, stick and wire, tandem-axle trailer mounted, diesel, SN 971015807.LINCOLN Shield-Arc Welder/Generator, Mdl. SA250 D30.152, stick and wire, tandem-axle trailer mounted, diesel, SN A1154907.

MILLER Bobcat 250 Welder/Generator, gas, SN 1021199.LINCOLN Ranger 225 Welder/Generator, gas, SN U1100303566.LINCOLN Ranger 225 Welder/Generator, gas, SN U1150405580.

WELDER GENERATORS CIRCLE CUTTER & WELDER

WELDERS & PLASMAS

LINCOLN Pro Precision 275 Tig Welder, SN U1080300299.

LINCOLN Precision Tig 375 Welder, SN U1110702873.

LINCOLN Square Wave Tig-355 Welder, SN U1960205997.

LINCOLN Pulsed Power 500 Welder, SN AC656859 w/LN-7 wire feed.

ESAB Plasma Arc Plasma Cutter, Mdl. ESP-150, SN PM-K104017.

(6) LINCOLN Idealarc R3R-500 Welders, SN AC540178, AC536181, AC674692, AC687871, AC691901, AC508044, AC508040 and AC508046.

6 AVAILABLE

(3) LINCOLN Idealarc DC-600 Welders, w/LN-74 Wire Feed, SN U1130603391, U1110912734 and U1110912741.

(3) HOBART Orbiting 350 Welders, w/Liburdi Dimetrics HTC880 orbital head.

ORBITAL WELDERS

9 TO BE SOLD

(2) LINCOLN Idealarc 300/300 Tig Welders, SN AC447391 and AC488487.

2 AVAILABLE

(2) LINCOLN Invertec Surface Tension Transfer Welders, Mdl. SST II, SN U1991010727 and U1991206582.

2 AVAILABLE

CYPRUS Circle Burner, Mdl. CB-3H, 4–48" square cut hole, 1.5–42" bevel cut hole, 0–7" rise and fall cam, 3–160 IPM, SN K941068.CYPRUS Circle Welder, Mdl. CW7ABG, 6–24" weld dia., .35–3/32" wire, .2–2.2 RPM, 0–7" cam range, 0–500 amp, SN K941080.

MANITOU Trailblazer Forklift Truck, Mdl. T804H, 8,000-lb. cap., all-terrain, side shift, diesel, SN 61942.

HYSTER 120 Forklift, Mdl. S120XLS, 12,000-lb. cap., all-terrain, side shift, 3-stage mast, LP gas, SN D004D02183T.

DROTT Rolling Gantry Crane, Mdl. 12A1, 12-ton cap., 2-hook, SN 826-564.

ROLLING STOCK

GENIE Personnel Boom Lift, Mdl. Genie S-60, all-terrain, dual fuel, 8' platform, 500-lb. cap., 66' max. work height, 51'3" max. horizontal reach, 22'2" outside turn radius.

Over 40 Welders & Plasmas to Be Sold

DIESEL

DIESEL

12,000-LB. CAP.

6 7

Spreader Bars: 10'9", 10-ton cap., 12’ 10-ton cap., 13'4", 32-ton cap., 18', 40-ton cap. 32' w/hook.

Partial View of Rigging Equipment. Also Selling: Plate Magnets, Dogs, Cable Slings, Clevises, Clamps, Chain Hoists and Slings.

Partial View of Giant Quantity of Hand and Power Tools.

Partial View of Metals Inventory Including: 1/4"–2" plate stock (some certified), pipe and structural.

< Partial View of Welding.

> Partial View

of Abrasives.

(2) Heavy-Duty 66" x 78" T-Slot Tables.

< GARDNER DENVER Rotary Air Compressor, Mdl. EBM99M, pallet-type, Electra Saver II, 75 HP, SN S3643412011.JOY Twistair Rotary Air Compressor, Mdl. TA0260EAA2CJ, pallet-type, 60 HP, 125 PSI max., SN 114884.

AIR COMPRESSOR

Bridge Crane, 5-ton cap., double girder, TR, OH, 27' 4.5" Bay (#2).

Bridge Crane, 10-ton cap., double girder, TR, OH, R&M hoist w/radio and pendant control, 1991, 27' 4.5" Bay (#3).

Bridge Crane, 15-ton cap., double-box girder, TR, OH, 60'1" bay, (needs repair) (#10).

Bridge Crane, 20-ton cap., double-box girder, TR, OH, w/5-ton auxiliary hoist, 60'1" bay, (#9).

(13) BRIDGE CRANES

Directions, Auction Terms & Conditions Available at www.stoneauctioneers.com

< CLEMCO Shot Blast System Including Dust Collector, shot recovery and shaker system, no enclosure.

SHOT BLAST

< NEW YORK BLOWER CO. Industrial General Purpose Floor Blower, Mdl. 332PLR, 17,000 CFM, 6" SP, 25 BHP.

> Modular Office, 16' x 12.5'.

MISCELLANEOUS

(6) 5-TON TO BE SOLD

2 AIR COMPRESSORS TO BE SOLD

(4) 10-TON TO BE SOLD

(2) RIGID 300 Pipe Threaders and Tools, SN 7566515 and 0803083.

2 AVAILABLE

Partial View of (12) Job Boxes.

12 AVAILABLE

(3) WBM-25PB Lifting Magnets.

3 AVAILABLE

(10) Welding Tables.

3 AVAILABLE

(3) Railroad Shuttle Carts.

3 AVAILABLE

20-TON CAP.

QS-0032802

61 Lakeview Lane, Carrollton, AL 35447

Many Items Not Pictured – See it all at: www.stoneauctioneers.com

Short Notice

Company Closed, Total Sell-OutMajor Vessel Builder, Fabricator & Erector

Thursday, November 10 at 10:00 A.M.St. Louis, Missouri

Kickham Boiler & Engineering

PresortedFirst Class Mail

U.S. PostagePAID

Eugene, OregonPermit No. 17

Publ ic Auction – Live Onsite Live Onl ine

NOT PICTUREDRADIAL DRILLAMERICAN Radial Arm Drill, 5' x 13", SN 61290-43.

WELDING POSITIONERS & GRIPPERSATLAS Welding Positioner, Mdl. XT-200, 200-lb. cap., SN 8983.PANDJIRIS Gripper, Mdl. B, 3-jaw, 1.5–40.75" OD, 5.5–44.5" ID, 350-lb., SN 800-3750-13.PANDJIRIS Gripper, Mdl. B, 3-jaw, 1.5–40.75" OD, 5.5–44.5" ID, 350-lb., SN 800-4093-9.

TURNING ROLL(5) Sets of Idle Rolls.

BEVELERSTRUMPH Hand Held Bevelers.

FIT-UP ROLLS(4) Fit-Up Rolls, 72" x 90", 11" diameter.

WELDERS & PLASMAS(2) HOBART Cyber 300 Tig Welders, Mdl. CT300DCS, SN 85W579611 and UK.LINCOLN V275 Portable Welder.

(5) LINCOLN Idealarc DC-600 Welder, SN U1110912731, U1930510337, U1130603390, U1110912732 and U1110912729.LINCOLN Idealarc DC-600 Welder, w/LN-7 Wire Feed, SN U1110912740.(2) MILLER Deltaweld 450 Welder, w/LN-7 Wire Feed.ESAB Wire Welder, Mdl. SVI 300I CB CC.ESAB Plasma Arc Plasma Cutter, Mdl. DCM 150.THERMAL DYNAMICS Portable Plasma, Mdl. 102 Cutmaster, SN MX52275249.PAKMASTER Portable Plasma, Mdl. 100XL Plus.LINCOLN TM 400/400 Arc Welder, SN AC143517.LINCOLN Mdl. SA-800 Arc Welder, SN A810597.KSM Arc II Stud Welder.AGM Stud Welder, Mdl. 1200S.Special Crane-Mounted Wire-Feed Welding System w/Power Supply.

KOIKE Track Torch, Mdl. IK-12 Max-3T, SN K7AT46.LINCOLN Electric Portable Wire Feeds, Mdl. LN-25.GULLCO Oscillator.ANGLE & BEAM PROCESSINGHydraulic System.SAWHorizontal Bandsaw.BRIDGE CRANESCONCO Bridge Crane, 5-ton cap., single girder, TR, UH, 27' 4.5" bay (#1).Bridge Crane, 10-ton cap., double girder, TR, UH, 37.5' bay (#5).Bridge Crane, 10-ton cap., double girder, TR, OH, 37.5' bay (#4).Bridge Crane, 5-ton cap., single girder, TR, UH, 37.5' bay (needs repair) (#6).Bridge Crane, 10-ton cap., double-box girder, cab-style, TR, OH, 60'1" bay, (needs repair) (#8).Bridge Crane, 5-ton cap., single girder, TR, UH, 60'1" bay (#6).

(2) Bridge Cranes, 5-ton cap., single girder, UH, 40' bay.Bridge Crane, 1-ton cap., single girder, UH, 40' bay.MISC.HAVIR Press Rite #2 OBI Press, SN 5921.C-O-MATIC Torch Unit.INVINCIBLE Vacuum System, SN 44K200.BUGGO Torch Unit.Misc. Jib Arms and Hoists.HOBART Hydraulic Torque Machine, SN 10081, 1995.MILWAUKEE Magnetic Drill.NUSTAR Power Pusher.HYTORC Hydraulic Wrench System, Mdl. C, SN 710081.Hydro-Static Tester, Mdl. 6634-1000, 1,000 PSI, SN 14C348.Scaffolding.Angle Plate.Utility Trailer.Compound T-Slot Angle Tables.(2) Heavy-Duty 40" x 17" T-Slot Tables.Heavy-Duty Welding Tables, 6' x 26' x 1/2" top.Shipping Supplies.Press Brake Dies.

Oxy Fuel Torches, Regulators, Hoses and Carts.Drill Press.Paint Pots.Material Bins.Dump Hoppers.Electrode Dryer Boxes.Large Qty. Shackles, Material Picks and Hooks.Power Pack Kits.Large Qty. Tubing Rolls.LINCOLN Electric Ventilators.Hydro-Static Tester.Testing Equipment.Pipe Vise Tables.Safety Equipment.Drum Fans, 36".Infrared Heaters.Propane Heaters.Torpedo Heaters.Banding Machines.Snow Blowers.Power Washers.Hydraulic Power Packs.Port-a-Powers.Ladders.Sand Blast Pot.

(13) BRIDGE CRANES TO BE SOLD

Directions, Auction Terms & Conditions Available at

www.stoneauctioneers.com