1

Mahmoud Ahmed Mohamed AbdelBaky Mansour

5th Settlement, New Cairo, Egypt

Mobile no. : (+201000 959 032)

E-mail : eng.mahmoud.mansour@outlook.com

Objective

Looking for a challenging career opportunity to be a member in the technical team of a growth oriented

company, to utilize and improve my skills and experience gained from my technical study and Working in

international prestigious companies.

Personal Data

Date Of Birth : 10th of May 1990

Nationality : Egyptian

Marital Status : Married

Military Status : Done

Education

B.Sc. of Mechanical Engineering, Faculty of Engineering, Shoubra, Benha University

Graduation Year: 2012

Graduation grade: Fair (63.72 %)

B.Sc. Year Degree: Very Good

Graduation Project: "Air Conditioning Systems with Thermal cool storage"

Graduation Project Grade: Excellent

Current Job

Working as Mechanical Design Engineer at :

From (16-8-2015) Till Now

Job Description:

Implements specific Plumbing & Fire fighting works in accordance with the work program of a project or as

requested within my department

Prepares and assists with the preparation of technical reports, schemes, bills of quantities, cost estimates, etc.

Carries out designs of Plumbing & Fire Fighting works, drawings, tender documents, etc., as required

Undertakes special and/or project assignments as required by the senior or Principal Engineer.

2

PROJECTS:

AL-MASSA PARK AT THE NEW CAPITAL

- The client is developing approximately 25 feddans located at the New Capital. The aim of the development is to construct a high-end, luxurious hotel. The project comprises hotel buildings, chalets, day-use villas, and a golf course.

AL-REHAB EXT 01 PROJECT: NORTH-TO-THE-CLUB

- Over a land area of 54,029 m2 and with a built-up area of 45,850 m2, the mall comprises a basement for

parking (around 870 cars), retail shops, prayer rooms, toilets, showers & lockers, and services. It also

includes a ground floor (3 entrances, retail shops, anchor stores, kiosks, supermarket, 2 pharmacies,

restaurants, toilets & services); outdoor parking area (around 290 cars); first floor (retail shops, anchor

stores, toilets, and services); and second floor (retail shops, kiosks, food court, restaurants, outdoor terrace,

kids area, mall administration, toilets, and services).

AL-REHAB SHOPPING CENTER (9TH & 10TH ZONES)

- The project comprises a supermarket, food court, fast-food hall, retail shopping center, showrooms, and

service shops. It also comprises an outdoor landscaped area with water features. The project's plot area is

29,416 m2.

SOMA BREEZE PROJECT

- The project comprises four residential blocks, each with a basement, ground floor, first floor, second floor,

and third floor. The total built-up area is 26,550 m2. The basement at the main building has a total area of

2,160 m2, including MEP spaces.

MOUNTAIN VIEW KUWADICO

- The project is set to be developed as a mixed-use development on an area of approximately 216 feddans.

The scope of work involves the design of site infrastructure, plus all utility buildings, as well as MEP design

for 10 types of buildings (each with a basement, ground floor, first floor, and 25% roof).

RENOVATION OF BIYALA, AL-BAYADEYAH, NAGAA HAMMADI, AND ABU TESHT HOSPITALS

- The project comprises 4 hospitals: Biyala Hospital in Kafr Al-Sheikh (3 buildings and 7 service buildings over a

land area of 6,135 m2 with a built-up area of 2,390 m2); Al-Bayadeyah Hospital in Luxor (5 buildings and 4

service buildings over a land area of 4,150 m2 with a built-up area of 2,561 m2); Nagaa Hammadi Hospital in

Qena (5 buildings over a land area of 8,631 m2 with a built-up area of 3,591 m2); and Abu Tesht Hospital in

Qena (5 buildings and 3 service buildings over a land area of 11,870 m2 with a built-up area of 3,603 m2).

Work Experience

Worked as a General Maintenance Engineer at:

Hi-Food Egypt Co. For Food industries (Ülker Egypt)

From (1-11-2013) To (1-8-2015)

3

Job Description:

Overseeing maintenance, repair & troubleshooting of 5 Biscuit Lines

Assisted in the installation and commissioning of the 5th production line (Wafer Line)

Overseeing Modifications of 5 production Lines

Overseeing Installation and Operation of new Machines

Planning of daily, shutdown and preventive activities.

Planning and following up preventive maintenance & following up maintenance's teams (Mechanical - Electrical

- Utilities) to insure that it is achieved.

Following up the ISO documentations & quality assurance.

Monitoring waste rates, analyzing root causes and suggesting means to reduce waste and cost.

Installation and maintenance of Pumps, Heat Exchanger, Boiler, Chiller, HVAC systems

Coordinates, activities of workers engaged in repair, maintenance, and installation of machines, and in

maintenance of buildings, grounds, and utility systems of industrial plant.

Prepares reports, analyzes data, and makes recommendations for improving operations

Build a good relation and interaction behavior between the Maintenance and Production Teams to get the

highest performance either from the machines or people

Managing the time during the periodical Maintenance and putting the perfect plan to do it with short time with

high quality by using the Advanced Maintenance.

Professional Experience

Experience of working with minimal supervision or as part of a small team in analyzing mechanical failures.

Knowledge of considering time constraints like safety, cost and environmental issues.

Have previously worked with multi-national and multi-skilled crews.

Explaining technical problems to non-technical colleagues.

Skills Profile

Advanced presentation skills

Demonstrating consistent achievement of objectives

Strong communication and interpersonal abilities.

Goal oriented.

Strong sense of responsibility.

Relevant Skills

Knowledge of HVAC and Refrigeration Systems Design

- Calculating and Installation of HVAC systems

- Calculate Static Of Equipment And It's Electric Power

- Ventilation And Civil Defense Calculation Of Pressurization And Smoke Extract

- Duct And Pipe Sizing

- Prepare Schedules And Bill Of Quantity And Details Drawing

4

Knowledge of Fire Fighting Systems Design

- Designing Water Sprinkler System , Including Pump Selection .

- Design Gas Extinguishing Systems

-Design Foam System

Knowledge Of Hydraulic Systems

Knowledge of Fluid/Solid Mechanics, Thermodynamics and Aerodynamics

AutoCad 2D and Autodesk Inventor and Autodesk Revit MEP

Some Knowledge of SolidWorks and Matlab

O/S: Win 9X, Win 2002 Professional, Win XP, Win Vista, Win 7, Win 8

Microsoft Office: Word, Excel, Power Point and Outlook

Courses

Project Planning and Control Techniques at (American University In Cairo) (2015)

Autodesk Revit MEP (2014)

Autodesk Inventor (2014)

Fire Fighting Systems Design (2013)

HVAC Systems Design and Load Estimation using hap (2013)

Autocad 2D (2012)

Hydraulic Basics (2011)

Training

Training at Cairo Oil Refining Company

Training at Belayim Petroleum Company (Petrobel)

Training at Military Factory 27 - Shubra Company for Engineering Industries

Languages

Arabic : Mother Tongue

English: Very good

References

Available upon request

Thank you for giving time to read my CV

Mahmoud A. Mansour