Upload
vomien
View
222
Download
2
Embed Size (px)
Citation preview
�© 2008 AS America Inc.
To Be Specified:❏ Color: ❏ White ❏ Bone ❏ Silver ❏ Linen ❏ Black❏ Seat: ❏ American Standard #590�.�00 Heavy duty open front less cover ❏ American Standard #5905.�00 Extra heavy duty open front less cover❏ Alternative Seat: ❏ Olsonite #95 open front seat less cover ❏ Church #9500C open front seat less cover❏ Flushometer Valve: ❏ American Standard Selectronic™ #6065.�6�.002 (Top Spud) ❏ American Standard Selectronic™ #6065.26�.007 (Back Spud)❏ Alternative Flushometer Valve: ❏ Sloan Royal #��� (Top Spud) ❏ Sloan Royal #�44-�.5 (Back Spud)
MADERA™ 15" HEIGHT1.6 GPF FLUSHOMETER TOILET
MADERA™ 15" HEIGHT
• Floor mount flushometer valve toilet• Vitreous china• Low-consumption (6.0 Lpf/�.6 gpf)• EverClean™ anti-microbial surface which inhibits the growth of stain and odor causing bacteria, mold, and mildew• Fully glazed 2-�/8" trapway• Elongated bowl• �0" or �2" roughing-in• �5" rim height• Condensation channel• Powerful direct-fed siphon jet action• �0" x �2" water surface area• �-�/2" inlet spud• 2 bolt caps• �00% factory flush tested
❏ 3451.160 Elongated bowl only, top spud❏ 3452.160 Elongated bowl only, top spud with slotted rim for bedpan holding (White only)❏ 3453.160 Elongated bowl only, back spud❏ 3455.160 Elongated bowl only, back spud with slotted rim for bedpan holding (White only)
Component Parts:❏ 047007-0070A Inlet Spud (furnished with bowl)❏ 481310-100 Bolt caps with retainers (furnished with bowl)
Nominal Dimensions:7�8 x 356 x 38�mm(28-�/4" x �4" x �5")
Fixture only, less seat and flush valve
Recommended working pressure–between25 psi at valve when flushing and 80 psi static
Compliance Certifications -Meets or Exceeds the Following Specifications:• ASME A��2.�9.2 for Vitreous China Fixtures• CAN/CSA International B45
SEE REVERSE FOR ROUGHING-IN DIMENSIONS
Revised �/08
2© 2008 AS America Inc.
NOTES:PRODUCT 345�.�60 AND 3453.�60 SHOWN, 3452.�60 AND 3455.�60 SAME AS EXCEPT WITH SLOTTED RIM FOR BED PAN HOLDING.TO COMPLY WITH AREA CODE GOVERNING THE HEIGHT OF VACUUM BREAKER ON THE FLUSHOMETER VALVE, THE PLUMBER MUST VERIFY DIMENSIONS SHOWN FOR SUPPLY ROUGHING.THIS TOILET DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 254MM (�0") AND A MAXIMUM DIMENSION OF 305MM (�2") FROM FINISHED WALL TO C/L OF OUTLET.FLUSHOMETER VALVE NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY. FLUSHOMETER VALVE REQUIREMENTS FOR �2" (305MM) ROUGH-IN: SWEAT EXTENSION NIPPLE IS REQUIRED. REFER TO VALVE MANUFACTURER AND LOCAL CODES.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A��2.�9.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
1 - 1/2SPUD
121mm(4-3/4) 702mm
(27-5/8)
238mm(9-3/8)
381mm(15)
470mm(18-1/2)
356mm(14)
338mm(13-5/16)
150mm(5-7/8)
254mm(10)
13mm(1/2)
25mm(1)
102mm(4)
718mm(28-1/4)
C/L OF SEAT POST HOLES140mm (5-1/2) CENTERS
FINISHED WALL
FINISHEDFLOOR
C/L OF OUTLET
1" N.P.T. OR 1" C.W.T. SUPPLYTO FLUSH VALVE
1 - 1/2SPUD
121mm(4-3/4) 702mm
(27-5/8)
238mm(9-3/8)
381mm(15)
470mm(18-1/2)
356mm(14)
338mm(13-5/16)
150mm(5-7/8)
254mm(10)
13mm(1/2)
25mm(1)
102mm(4)
718mm(28-1/4)
C/L OF SEAT POST HOLES140mm (5-1/2) CENTERS
FINISHED WALL
FINISHED FLOOR
C/L OF OUTLET
1" N.P.T. OR 1" C.W.T. SUPPLYTO FLUSH VALVE
MADERA™ 15" HEIGHT1.6 GPF FLUSHOMETER TOILET
238mm(9-3/8)
381mm(15)
400mm(15-3/4)
470mm(18-1/2)
356mm(14)
338mm(13-5/16)
150mm(5-7/8)
254mm(10)
13mm(1/2)
76mm(3)
718mm(28-1/4)
C/L OF SEAT POST HOLES140mm (5-1/2) CENTERS
FINISHED WALL
FINISHED FLOOR
C/L OF OUTLET
121mm(4-3/4) 702mm
(27-5/8)
238mm(9-3/8)
381mm(15)
470mm(18-1/2)
356mm(14)
338mm(13-5/16)
150mm(5-7/8)
254mm(10)
13mm(1/2)
102mm(4)
718mm(28-1/4)
C/L OF SEAT POST HOLES140mm (5-1/2) CENTERS
FINISHED WALL
FINISHED FLOOR
C/L OF OUTLET
1" N.P.T. OR 1" C.W.T. SUPPLYTO FLUSH VALVE
3451.160/3452.160
3453.160/3455.160
Revised �/08
3© 2008 AS America Inc.
MADERA™ 16-1/2" HEIGHT 1.6 GPF FLUSHOMETER TOILET
MADERA™ 16-1/2" HEIGHT
• Floor mount flushometer valve toilet• Vitreous china• Low-consumption (6.0 Lpf/�.6 gpf)• EverClean™ anti-microbial surface which inhibits the growth of stain and odor causing bacteria, mold, and mildew• �0" or �2" roughing-in• �6-�/2" rim height for accessible application• Condensation channel• Elongated bowl• Powerful direct-fed siphon jet action• Fully glazed 2-�/8" trapway• �0" x �2" water surface area• �-�/2" inlet spud• 2 bolt caps• �00% factory flush tested
❏ 3461.160 Elongated bowl only, top spud❏ 3462.160 Elongated bowl only, top spud with slotted rim for bedpan holding (White only)❏ 3465.160 Elongated bowl only, top spud with 4 bolts❏ 3466.160 Elongated bowl only, top spud with slotted rim for bedpan holding with 4 bolts (white only)❏ 3463.160 Elongated bowl only, back spud❏ 3464.160 Elongated bowl only, back spud with slotted rim for bedpan holding (White only)
Component Parts:❏ 047007-0070A Inlet spud (furnished with bowl)❏ 481310-100 Bolt caps with retainers (furnished with bowl)
Nominal Dimensions:7�8 x 356 x 4�9mm(28-�/4" x �4" x �6-�/2")
Recommended working pressure–between25 psi at valve when flushing and 80 psi static
Fixture only, less seat and flush valve
Compliance Certifications -Meets or Exceeds the Following Specifications:• ASME A��2.�9.2 for Vitreous China Fixtures• CAN/CSA International B45
BARRIER FREE
SEE REVERSE FOR ROUGHING-IN DIMENSIONS
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE BUILDING FACILITIES - CHECK LOCAL CODES. When installed so top of seat is 432 to 483mm (17" to 19") from thefinished floor.
To Be Specified:❏ Color: ❏ White ❏ Bone ❏ Silver ❏ Linen ❏ Black❏ Seat: ❏ American Standard #590�.�00 Heavy duty open front less cover ❏ American Standard #5905.�00 Extra heavy duty open front less cover❏ Alternative Seat: ❏ Olsonite #95 open front seat less cover ❏ Church #9500C open front seat less cover❏ Flushometer Valve: ❏ American Standard Selectronic™ #6065.�6�.002 (Top Spud) ❏ American Standard Selectronic™ #6065.26�.007 (Back Spud)❏ Alternative Flushometer Valve: ❏ Sloan Royal #��� (Top Spud) ❏ Sloan Royal #�44-�.5 (Back Spud)
Revised �/08
4© 2008 AS America Inc.
NOTES:PRODUCT 345�.�60 AND 3453.�60 SHOWN, 3452.�60 AND 3455.�60 SAME AS EXCEPT WITH SLOTTED RIM FOR BED PAN HOLDING.TO COMPLY WITH AREA CODE GOVERNING THE HEIGHT OF VACUUM BREAKER ON THE FLUSHOMETER VALVE, THE PLUMBER MUST VERIFY DIMENSIONS SHOWN FOR SUPPLY ROUGHING.THIS TOILET DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 254MM (�0") AND A MAXIMUM DIMENSION OF 305MM (�2") FROM FINISHED WALL TO C/L OF OUTLET.FLUSHOMETER VALVE NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY. FLUSHOMETER VALVE REQUIREMENTS FOR �2" (305MM) ROUGH-IN: SWEAT EXTENSION NIPPLE IS REQUIRED. REFER TO VALVE MANUFACTURER AND LOCAL CODES.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A��2.�9.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
C/L OF SEAT POST HOLES140mm (5-1/2) CENTER
121mm(4-3/4) 730mm
(28-3/4)
238mm(9-3/8)
419mm(16-1/2)
470mm(18-1/2)
356mm(14)
338mm(13-5/16)
150mm(5-7/8)
254mm(10)
13mm(1/2)
102mm(4)
718mm(28-1/4)
FINISHED WALL
FINISHED FLOOR
C/L OF OUTLET
1" N.P.T. OR 1" C.W.T. SUPPLYTO FLUSH VALVE
238mm(9-3/8)
419mm(16-1/2)
438mm(17-1/4)
470mm(18-1/2)
356mm(14)
338mm(13-5/16)
150mm(5-7/8)
254mm(10)
13mm(1/2)
76mm(3)
718mm(28-1/4)
C/L OF SEAT POST HOLES140mm (5-1/2) CENTERS
FINISHED WALL
FINISHED FLOOR
C/L OF OUTLET
MADERA™ 16-1/2" HEIGHT 1.6 GPF FLUSHOMETER TOILET
C/L OF SEAT POST HOLES140mm (5-1/2) CENTER 1-1/2
SPUD
121mm(4-3/4) 730mm
(28-3/4)
730mm(28-3/4)
238mm(9-3/8)
419mm(16-1/2)
470mm(18-1/2)
356mm(14)
338mm(13-5/16)
150mm(5-7/8)
254mm(10)
13mm(1/2)
25mm(1)
102mm(4)
718mm(28-1/4)
FINISHED WALL
FINISHED FLOOR
C/L OF OUTLET
1" N.P.T. OR 1" C.W.T. SUPPLYTO FLUSH VALVE
1 - 1/2SPUD
121mm(4-3/4)
238mm(9-3/8)
419mm(16-1/2)
470mm(18-1/2)
356mm(14)
338mm(13-5/16)
150mm(5-7/8)
254mm(10)
13mm(1/2)
25mm(1)
102mm(4)
718mm(28-1/4)
C/L OF SEAT POST HOLES140mm (5-1/2) CENTERS
FINISHED WALL
FINISHEDFLOOR
C/L OF OUTLET
1" N.P.T. OR 1" C.W.T. SUPPLYTO FLUSH VALVE
3461.160/3462.160/3465.160/3466.160
3463.160/3464.160
BARRIER FREE
Revised �/08
5© 2008 AS America Inc.
AFWALL™ ELONGATED1.6 GPF FLUSHOMETER TOILET
AFWALL™ ELONGATED TOILET
• Wall-mounted flushometer valve toilet• Vitreous china• Low-consumption (6.0 Lpf/�.6 gpf)• EverClean™ anti-microbial surface which inhibits the growth of stain and odor causing bacteria, mold, and mildew• Condensation channel• Elongated bowl• Powerful direct-fed siphon jet action• �-�/2" inlet spud• Fully-glazed 2-�/8" trapway• �0" x �2" water surface area• �00% factory flush tested
❏ 3351.160 Elongated bowl only, top spud❏ 3352.160 Elongated bowl only, top spud with slotted rim for bedpan holding (White only)❏ 3353.160 Elongated bowl only, back spud❏ 3354.160 Elongated bowl only, back spud with slotted rim for bedpan holding (White only)
Component Parts: ❏ 047007-0070A Inlet Spud (furnished with bowl)
Nominal Dimensions:660 x 356 x 38�mm(26" x �4" x �5")
Recommended working pressure–between25 psi at valve when flushing and 80 psi static
Fixture only, less seat, bolt caps, and flush valve
Compliance Certifications -Meets or Exceeds the Following Specifications:• ASME A��2.�9.2 for Vitreous China Fixtures• CAN/CSA International B45
SEE REVERSE FOR ROUGHING-IN DIMENSIONS
To Be Specified:❏ Color: ❏ White ❏ Bone ❏ Silver ❏ Linen ❏ Black❏ Seat: ❏ American Standard #590�.�00 Heavy duty open front less cover ❏ American Standard #5905.�00 Extra heavy duty open front less cover❏ Alternative Seat: ❏ Olsonite #95 open front seat less cover ❏ Church #9500C open front seat less cover❏ Flushometer Valve: ❏ American Standard Selectronic™ #6065.�6�.002 (Top Spud) ❏ American Standard Selectronic™ #6065.262.007 (Concealed Back Spud) ❏ Alternative Flushometer Valve: ❏ Sloan Royal #��� (Top Spud) ❏ Sloan Royal #�44-�.5 (Back Spud)
Revised �/08
BARRIER FREE
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE BUILDING FACILITIES - CHECK LOCAL CODES. When installed so top of seat is 432 to 483mm (17" to 19") from thefinished floor.
6© 2008 AS America Inc.
NOTES:● Toilet designed to meet ADA accessibility standards when top of seat height set at 432 to 483mm (17" to 19") from finished floor.
PRODUCT 335�.�60 SHOWN, 3352.�60 SAME AS EXCEPT WITH SLOTTED RIM FOR BED PAN HOLDING.PRODUCT 3353.�60 SHOWN, 3354.�60 SAME AS EXCEPT WITH SLOTTED RIM FOR BED PAN HOLDING.WASTE OUTLET SEAL RING MUST BE NEOPRENE OR GRAPHITE-FELT (WAX RING NOT RECOMMENDED).SUGGESTED 2mm (�/�6) CLEARANCE BETWEEN FACE OF WALL AND BACK OF BOWL.TO COMPLY WITH AREA CODE GOVERNING THE HEIGHT OF VACUUM BREAKER ON THE FLUSHOMETER VALVE, THE PLUMBER MUST VERIFY DIMENSIONS SHOWN FOR SUPPLY ROUGHING.FLUSHOMETER VALVE NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY.CARRIER FITTING AS REQUIRED TO BE FURNISHED BY OTHERS.PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORT.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A��2.�9.2.These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages
FINISHED WALL
470mm(18-1/2)
C/L OF SEAT POST HOLES140mm(5-1/2) CENTERS
660mm(26)
133mm(5-1/4)
191mm(7-1/2)
(4) 22mm (7/8)DIA. HOLES
356mm(14)
C/L OFOUTLET
FINISHEDFLOOR
32mm(1-1/4)
381mm(15)
330mm(13)
(3/4)19mm
133m
m(5
-1/4
)
95mm(3-3/4)
C/L
229mm(9)
89mm(3-1/2)
76mm(3) DIA. HOLE IN WALL FOR 1-1/2 SPUD
70m
m(2
-3/4
)
283mm(11-1/8)
330mm(13)
FINISHED WALL
470mm(18-1/2)
C/L OF SEAT POST HOLES140mm(5-1/2) CENTERS
660mm(26)
133mm(5-1/4)
191mm(7-1/2)
298mm(11-3/4)
(4) 22mm (7/8)DIA. HOLES
356mm(14)
C/L OFOUTLET
FINISHEDFLOOR
32mm(1-1/4)
381mm(15)
330mm(13)
(3/4)19mm
133m
m(5
-1/4
)
95mm(3-3/4)
C/L
229mm(9)
38mm (1-1/2) DIA. HOLE IN WALL
95mm(3-3/4)
FOR WALLS UP TO 1" IN THICKNESS FOR EACH INCHADDITIONAL THICKNESS OF WALL ADD 25mm (1) TOMEASUREMENT SHOWN
89mm(3-1/2)
1" C.W.T. OR N.P.T. SUPPLYAS REQ'D NOT FURNISHED
121mm(4-3/4)
VACUUM BREAKER
76mm(3) DIA. HOLE IN WALL FOR 1-1/2 SPUD
254mm(10)
41mm(1-5/8)
38mm(1-1/2)
70m
m(2
-3/4
)
283mm(11-1/8)
330mm(13)
FINISHED WALL
470mm(18-1/2)
C/L OF SEAT POSTHOLES 140 mm(5-1/2) CENTER
660mm(26)
73mm(2-7/8)
133mm(5-1/4)
191mm(7-1/2)
292mm(11-1/2)
(4) 22mm(7/8)
HOLES
356mm(14)
C/L OFOUTLET
121mm(4-3/4)
FINISHEDFLOOR
32mm(1-1/4)
381mm(15)
1" N.P.T. OR C.W.T. SUPPLYAS REQUIRED TO FLUSH VALVE
330mm(13)
19mm(3/4)
133mm(5-1/4)
95mm(3-3/4)
70mm(2-3/4)
1-1/2 SPUD
C/L
229mm(9)
FINISHED WALL
470mm(18-1/2)
C/L OF SEAT POSTHOLES 140 mm(5-1/2) CENTER
660mm(26)
73mm(2-7/8)
133mm(5-1/4)
191mm(7-1/2)
292mm(11-1/2)
(4) 22mm(7/8)
HOLES
356mm(14)
C/L OFOUTLET
121mm(4-3/4)
FINISHEDFLOOR
32mm(1-1/4)
381mm(15)
1" N.P.T. OR C.W.T. SUPPLYAS REQUIRED TO FLUSH VALVE
342mm(13-1/2)
19mm(3/4)
133mm(5-1/4)
95mm(3-3/4)
70mm(2-3/4)
1-1/2 SPUD
C/L
229mm(9)
3351.160/3352.160
3353.160/3354.160
AFWALL™ ELONGATED1.6 GPF FLUSHOMETER TOILET
Revised �/08
BARRIER FREE
7© 2008 AS America Inc.
AFWALL™ ADA RETROFIT 1.6 GPF FLUSHOMETER TOILET
AFWALL™ ADA RETROFIT
• Wall-mounted flushometer valve toilet• Vitreous china• Low-consumption (6.0 Lpf/�.6 gpf)• EverClean™ anti-microbial surface which inhibits the growth of stain and odor causing bacteria, mold, and mildew• Elongated bowl• Powerful direct-fed siphon jet action• Fully-glazed 2-�/8" trapway• �0" x �2" water surface area• Condensation channel• �-�/2" inlet spud• �00% factory flush tested
❏ 3355.160 Elongated bowl only, top spud❏ 3356.160 Elongated bowl only, top spud with slotted rim for bedpan holding (White only)❏ 3357.160 Elongated bowl only, back spud❏ 3358.160 Elongated bowl only, back spud with slotted rim for bedpan holding (White only)
Afwall ADA �.6 replaces standard wall-hung 3.5 GPF or �.6 GPF models and roughs-in at 4�0mm (�6-�/8") rim height to meet ADA with no need to modify the existing carrier or through wall supply (providing centerline of current outlet is �33mm [5-�/4"] above finished floor).
Component Parts:❏ 047007-0070A Inlet spud (furnished with bowl)❏ 736046-100 Flushometer valve rough-in adapter kit (furnished with bowl)
Nominal Dimensions:660 x 356 x 4�9mm(26" x �4" x �6-�/2")
For Top spud bowls, American Standard kit #736046-�00 Flushometer Valve Conversion Kit containing a 25mm (�") chrome-plated street ell, a vacuum breaker, and a 330mm (�3") tail piece included to meet minimum �52mm (6") codebetween bowl and vacuum breaker.
Recommended working pressure–between25 psi at valve when flushing and 80 psi static
Fixture only, less seat, carrier, bolt caps, and flush valve
Compliance Certifications -Meets or Exceeds the Following Specifications:• ASME A��2.�9.2 for Vitreous China Fixtures• CAN/CSA International B45
BARRIER FREE
SEE REVERSE FOR ROUGHING-IN DIMENSIONS
To Be Specified:❏ Color: ❏ White ❏ Bone ❏ Silver ❏ Linen ❏ Black❏ Seat: ❏ American Standard #590�.�00 Heavy duty open front less cover ❏ American Standard #5905.�00 Extra heavy duty open front less cover❏ Alternative Seat: ❏ Olsonite #95 open front seat less cover ❏ Church #9500C open front seat less cover❏ Flushometer Valve: ❏ American Standard Selectronic™ #6065.�6�.002 (Top Spud) ❏ American Standard Selectronic™ #6065.262.007 (Concealed Back Spud) ❏ Alternative Flushometer Valve: ❏ Sloan Royal #��� (Top Spud) ❏ Sloan Royal #�44-�.5 (Back Spud)
Revised �/08
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE BUILDING FACILITIES - CHECK LOCAL CODES. When installed so top of seat is 432 to 483mm (17" to 19") from thefinished floor.
8© 2008 AS America Inc.
NOTES:● Toilet designed to meet ADA accessibility standards when top of seat height set at 432 to 483mm (17" to 19") from finished floor.
PRODUCT 3355.�60 AND 3357.�60 SHOWN, 3356.�60 AND 3358.�60 SAME AS EXCEPT WITH SLOTTED RIM FOR BED PAN HOLDING.* REQUIRES AMERICAN STANDARD KIT 736046-�00 TO UPGRADE EXISTING INSTALLATION OF FLUSHOMETER VALVE AND COMPONENTS.WASTE OUTLET SEAL RING MUST BE NEOPRENE OR GRAPHITE-FELT (WAX RING NOT RECOMMENDED).SUGGESTED �/�6 CLEARANCE BETWEEN FACE OF WALL AND BACK OF BOWL.TO COMPLY WITH AREA CODE GOVERNING THE HEIGHT OF VACUUM BREAKER ON THE FLUSHOMETER VALVE, THE PLUMBER MUST VERIFY DIMENSIONS SHOWN FOR SUPPLY ROUGHING.FLUSHOMETER VALVE NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY.CARRIER FITTING AS REQUIRED TO BE FURNISHED BY OTHERS.PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A��2.�9.2.These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
3355.160/3356.160
AFWALL™ ADA RETROFIT 1.6 GPF FLUSHOMETER TOILET
FINISHED WALL
470mm(18-1/2)
C/L OF SEAT POSTHOLES 140 mm(5-1/2) CENTER
660mm(26)
73mm(2-7/8)
133mm(5-1/4)
191mm(7-1/2)
292mm(11-1/2)
(4) 22mm(7/8)
HOLES
356mm(14)
C/L OFOUTLET
121mm(4-3/4)
FINISHEDFLOOR
32mm(1-1/4)
1" N.P.T. OR C.W.T. SUPPLYAS REQUIRED TO FLUSH VALVE
368mm(14-1/2)
19mm(3/4)
142mm(5-5/8)
83mm(3-1/4)
62mm(2-3/8)
1-1/2 SPUD
C/L
229mm(9)
419mm(16-1/2)
FINISHED WALL
470mm(18-1/2)
C/L OF SEAT POSTHOLES 140 mm(5-1/2) CENTER
660mm(26)
73mm(2-7/8)
133mm(5-1/4)
191mm(7-1/2)
292mm(11-1/2)
(4) 22mm(7/8)
HOLES
356mm(14)
C/L OFOUTLET
121mm(4-3/4)
FINISHEDFLOOR
32mm(1-1/4)
419mm(16-1/2)
1" N.P.T. OR C.W.T. SUPPLYAS REQUIRED TO FLUSH VALVE
368mm(14-1/2)
19mm(3/4)
133mm(5-1/4)
83mm(3-1/4)
62mm(2-3/8)
1-1/2 SPUD
C/L
229mm(9)
FINISHED WALL
470mm(18-1/2)
C/L OF SEAT POST HOLES140mm(5-1/2) CENTERS
660mm(26)
133mm(5-1/4)
191mm(7-1/2)
298mm(11-3/4)
(4) 22mm (7/8)DIA. HOLES
356mm(14)
C/L OFOUTLET
FINISHEDFLOOR
32mm(1-1/4)
368mm(14-1/2)
(3/4)19mm
142m
m(5
-5/8
)
83mm(3-1/4)
C/L
229mm(9)
38mm (1-1/2) DIA. HOLE IN WALL
95mm(3-3/4)
FOR WALLS UP TO 1" IN THICKNESS FOR EACH INCHADDITIONAL THICKNESS OF WALL ADD 25mm (1) TOMEASUREMENT SHOWN
89mm(4)
1" C.W.T. OR N.P.T. SUPPLYAS REQ'D NOT FURNISHED
121mm(4-3/4)
VACUUM BREAKER
76mm(3) DIA. HOLE IN WALL FOR 1-1/2 SPUD
254mm(10)
41mm(1-5/8)
38mm(1-1/2)
62m
m(2
-3/8
)
419mm(16-1/2)
FINISHED WALL
470mm(18-1/2)
C/L OF SEAT POST HOLES140mm(5-1/2) CENTERS
660mm(26)
133mm(5-1/4)
191mm(7-1/2)(4) 22mm (7/8)
DIA. HOLES
356mm(14)
C/L OFOUTLET
FINISHEDFLOOR
32mm(1-1/4)
419mm(16-1/2)
368mm(14-1/2)
(3/4)19mm
133m
m(5
-1/4
)
83mm(3-1/4)
C/L
229mm(9)
127mm(5)
76mm(3) DIA. HOLE IN WALL FOR 1-1/2 SPUD
62m
m(2
-3/8
)
320mm(12-9/16)
367mm(14-7/16)
3357.160/3358.160
Revised �/08
BARRIER FREE
9© 2008 AS America Inc.
MADERA™ FloWise™ 15" HEIGHT1.28 GPF FLUSHOMETER TOILET
MADERA™ FloWise™ 15" HEIGHT
• Floor mount flushometer valve toilet• Vitreous china• Meets definition for HET (High Efficiency Toilet)• High Efficiency (4.8 Lpf/�.28 gpf)• EverClean™ anti-microbial surface which inhibits the growth of stain and odor causing bacteria, mold, and mildew• Fully glazed 2-�/8" trapway• Elongated bowl• �0" or �2" roughing-in• �5" rim height• Condensation channel• Powerful direct-fed siphon jet action• �0" x �2" water surface area• �-�/2" inlet spud• 2 bolt caps• �00% factory flush tested
❏ 3451.128 Elongated bowl only, top spud❏ 3452.128 Elongated bowl only, top spud with slotted rim for bedpan holding (White only)❏ 3453.128 Elongated bowl only, back spud❏ 3455.128 Elongated bowl only, back spud with slotted rim for bedpan holding (White only)
Component Parts:❏ 047007-0070A Inlet Spud (furnished with bowl)❏ 481310-100 Bolt caps with retainers (furnished with bowl)
Nominal Dimensions:7�8 x 356 x 38�mm(28-�/4" x �4" x �5")
Recommended working pressure–between25 psi at valve when flushing and 80 psi static
Fixture only, less flushometer valve and seat.
Compliance Certifications -Meets or Exceeds the Following Specifications:• ASME A��2.�9.2 for Vitreous China Fixtures• CAN/CSA International B45
SEE REVERSE FOR ROUGHING-IN DIMENSIONS
To Be Specified:❏ Color: ❏ White ❏ Bone ❏ Silver ❏ Linen ❏ Black❏ Seat: ❏ American Standard #590�.�00 Heavy duty open front less cover ❏ American Standard #5905.�00 Extra heavy duty open front less cover❏ Alternative Seat: ❏ Olsonite #95 open front seat less cover ❏ Church #9500C open front seat less cover❏ Flushometer Valve: ❏ American Standard Selectronic™ #6065.�2�.002 (Top Spud) ❏ American Standard Selectronic™ #6065.22�.007 (Back Spud) ❏ Alternative Flushometer Valve: ❏ Sloan Crown #���-�.2 (Top Spud)
Revised �/08
�0© 2008 AS America Inc.
NOTES:PRODUCT 345�.�60 AND 3453.�60 SHOWN, 3452.�60 AND 3455.�60 SAME AS EXCEPT WITH SLOTTED RIM FOR BED PAN HOLDING.TO COMPLY WITH AREA CODE GOVERNING THE HEIGHT OF VACUUM BREAKER ON THE FLUSHOMETER VALVE, THE PLUMBER MUST VERIFY DIMENSIONS SHOWN FOR SUPPLY ROUGHING.THIS TOILET DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 254MM (�0") AND A MAXIMUM DIMENSION OF 305MM (�2") FROM FINISHED WALL TO C/L OF OUTLET.FLUSHOMETER VALVE NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY. FLUSHOMETER VALVE REQUIREMENTS FOR �2" (305MM) ROUGH-IN: SWEAT EXTENSION NIPPLE IS REQUIRED. REFER TO VALVE MANUFACTURER AND LOCAL CODES.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A��2.�9.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
1 - 1/2SPUD
121mm(4-3/4) 702mm
(27-5/8)
238mm(9-3/8)
381mm(15)
470mm(18-1/2)
356mm(14)
338mm(13-5/16)
150mm(5-7/8)
254mm(10)
13mm(1/2)
25mm(1)
102mm(4)
718mm(28-1/4)
C/L OF SEAT POST HOLES140mm (5-1/2) CENTERS
FINISHED WALL
FINISHEDFLOOR
C/L OF OUTLET
1" N.P.T. OR 1" C.W.T. SUPPLYTO FLUSH VALVE
1 - 1/2SPUD
121mm(4-3/4) 702mm
(27-5/8)
238mm(9-3/8)
381mm(15)
470mm(18-1/2)
356mm(14)
338mm(13-5/16)
150mm(5-7/8)
254mm(10)
13mm(1/2)
25mm(1)
102mm(4)
718mm(28-1/4)
C/L OF SEAT POST HOLES140mm (5-1/2) CENTERS
FINISHED WALL
FINISHED FLOOR
C/L OF OUTLET
1" N.P.T. OR 1" C.W.T. SUPPLYTO FLUSH VALVE
MADERA™ FloWise™ 15" HEIGHT1.28 GPF FLUSHOMETER TOILET
238mm(9-3/8)
381mm(15)
400mm(15-3/4)
470mm(18-1/2)
356mm(14)
338mm(13-5/16)
150mm(5-7/8)
254mm(10)
13mm(1/2)
76mm(3)
718mm(28-1/4)
C/L OF SEAT POST HOLES140mm (5-1/2) CENTERS
FINISHED WALL
FINISHED FLOOR
C/L OF OUTLET
121mm(4-3/4) 702mm
(27-5/8)
238mm(9-3/8)
381mm(15)
470mm(18-1/2)
356mm(14)
338mm(13-5/16)
150mm(5-7/8)
254mm(10)
13mm(1/2)
102mm(4)
718mm(28-1/4)
C/L OF SEAT POST HOLES140mm (5-1/2) CENTERS
FINISHED WALL
FINISHED FLOOR
C/L OF OUTLET
1" N.P.T. OR 1" C.W.T. SUPPLYTO FLUSH VALVE
3451.128/3452.128
3453.128/3455.128
Revised �/08
��© 2008 AS America Inc.
MADERA™ FloWise™ 16-1/2" HEIGHT 1.28 GPF FLUSHOMETER TOILET
MADERA™ FloWise™ 16-1/2" HEIGHT
• Floor mount flushometer valve toilet• Vitreous china• Meets definition for HET (High Efficiency Toilet)• High Efficiency (4.8 Lpf/�.28 gpf)• EverClean™ anti-microbial surface which inhibits the growth of stain and odor causing bacteria, mold, and mildew• �0" or �2" roughing-in• �6-�/2" rim height for accessible application• Condensation channel• Elongated bowl• Powerful direct-fed siphon jet action• Fully glazed 2-�/8" trapway• �0" x �2" water surface area• �-�/2" top spud• 2 bolt caps• �00% factory flush tested
❏ 3461.128 Elongated bowl only, top spud❏ 3462.128 Elongated bowl only, top spud with slotted rim for bedpan holding (White only)❏ 3465.128 Elongated bowl only, top spud with 4 bolts❏ 3466.128 Elongated bowl only, top spud with slotted rim for bedpan holding with 4 bolts (White only)❏ 3463.128 Elongated bowl only, back spud❏ 3464.128 Elongated bowl only, back spud with slotted rim for bedpan holding (White only)
Component Parts:❏ 047007-0070A Inlet spud (furnished with bowl)❏ 481310-100 Bolt caps with retainers (furnished with bowl)
Nominal Dimensions:7�8 x 356 x 4�9mm(28-�/4" x �4" x �6-�/2")
Recommended working pressure–between25 psi at valve when flushing and 80 psi static
Fixture only, less seat and flushometer valve
Compliance Certifications -Meets or Exceeds the Following Specifications:• ASME A��2.�9.2 for Vitreous China Fixtures• CAN/CSA International B45
BARRIER FREE
SEE REVERSE FOR ROUGHING-IN DIMENSIONS
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE BUILDING FACILITIES - CHECK LOCAL CODES. When installed so top of seat is 432 to 483mm (17" to 19") from thefinished floor.
To Be Specified:❏ Color: ❏ White ❏ Bone ❏ Silver ❏ Linen ❏ Black❏ Seat: ❏ American Standard #590�.�00 Heavy duty open front less cover ❏ American Standard #5905.�00 Extra heavy duty open front less cover❏ Alternative Seat: ❏ Olsonite #95 open front seat less cover ❏ Church #9500C open front seat less cover❏ Flushometer Valve: ❏ American Standard Selectronic™ #6065.�2�.002 (Top Spud) ❏ American Standard Selectronic™ #6065.22�.007 (Back Spud) ❏ Alternative Flushometer Valve: ❏ Sloan Crown #���-�.2 (Top Spud)
Revised �/08
�2© 2008 AS America Inc.
NOTES:PRODUCT 345�.�60 AND 3453.�60 SHOWN, 3452.�60 AND 3455.�60 SAME AS EXCEPT WITH SLOTTED RIM FOR BED PAN HOLDING.TO COMPLY WITH AREA CODE GOVERNING THE HEIGHT OF VACUUM BREAKER ON THE FLUSHOMETER VALVE, THE PLUMBER MUST VERIFY DIMENSIONS SHOWN FOR SUPPLY ROUGHING.THIS TOILET DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 254MM (�0") AND A MAXIMUM DIMENSION OF 305MM (�2") FROM FINISHED WALL TO C/L OF OUTLET.FLUSHOMETER VALVE NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY. FLUSHOMETER VALVE REQUIREMENTS FOR �2" (305MM) ROUGH-IN: SWEAT EXTENSION NIPPLE IS REQUIRED. REFER TO VALVE MANUFACTURER AND LOCAL CODES.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A��2.�9.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
C/L OF SEAT POST HOLES140mm (5-1/2) CENTER
121mm(4-3/4) 730mm
(28-3/4)
238mm(9-3/8)
419mm(16-1/2)
470mm(18-1/2)
356mm(14)
338mm(13-5/16)
150mm(5-7/8)
254mm(10)
13mm(1/2)
102mm(4)
718mm(28-1/4)
FINISHED WALL
FINISHED FLOOR
C/L OF OUTLET
1" N.P.T. OR 1" C.W.T. SUPPLYTO FLUSH VALVE
238mm(9-3/8)
419mm(16-1/2)
438mm(17-1/4)
470mm(18-1/2)
356mm(14)
338mm(13-5/16)
150mm(5-7/8)
254mm(10)
13mm(1/2)
76mm(3)
718mm(28-1/4)
C/L OF SEAT POST HOLES140mm (5-1/2) CENTERS
FINISHED WALL
FINISHED FLOOR
C/L OF OUTLET
MADERA™ FloWise™ 16-1/2" HEIGHT 1.28 GPF FLUSHOMETER TOILET
C/L OF SEAT POST HOLES140mm (5-1/2) CENTER 1-1/2
SPUD
121mm(4-3/4) 730mm
(28-3/4)
730mm(28-3/4)
238mm(9-3/8)
419mm(16-1/2)
470mm(18-1/2)
356mm(14)
338mm(13-5/16)
150mm(5-7/8)
254mm(10)
13mm(1/2)
25mm(1)
102mm(4)
718mm(28-1/4)
FINISHED WALL
FINISHED FLOOR
C/L OF OUTLET
1" N.P.T. OR 1" C.W.T. SUPPLYTO FLUSH VALVE
1 - 1/2SPUD
121mm(4-3/4)
238mm(9-3/8)
419mm(16-1/2)
470mm(18-1/2)
356mm(14)
338mm(13-5/16)
150mm(5-7/8)
254mm(10)
13mm(1/2)
25mm(1)
102mm(4)
718mm(28-1/4)
C/L OF SEAT POST HOLES140mm (5-1/2) CENTERS
FINISHED WALL
FINISHEDFLOOR
C/L OF OUTLET
1" N.P.T. OR 1" C.W.T. SUPPLYTO FLUSH VALVE
3461.128/3462.128/3465.128/3466.128
3463.128/3464.128
BARRIER FREE
Revised �/08
�3© 2008 AS America Inc.
AFWALL™ FloWise™ ELONGATED1.28 GPF FLUSHOMETER TOILET
AFWALL™ FloWise™ ELONGATED TOILET
• Wall-mounted flushometer valve toilet• Vitreous china• Meets definition for HET (High Efficiency Toilet)• High Efficiency (4.8 Lpf/�.28 gpf)• EverClean™ anti-microbial surface which inhibits the growth of stain and odor causing bacteria, mold, and mildew• Condensation channel• Elongated bowl• Powerful direct-fed siphon jet action• �-�/2" inlet spud• Fully-glazed 2-�/8" trapway• �0" x �2" water surface area• �00% factory flush tested
❏ 3351.128 Elongated bowl only, top spud❏ 3352.128 Elongated bowl only, top spud with slotted rim for bedpan holding (White only)❏ 3353.128 Elongated bowl only, back spud❏ 3354.128 Elongated bowl only, back spud with slotted rim for bedpan holding (White only)
Component Parts: ❏ 047007-0070A Inlet Spud (furnished with bowl)
Nominal Dimensions:660 x 356 x 38�mm(26" x �4" x �5")
Recommended working pressure–between25 psi at valve when flushing and 80 psi static
Fixture only, less seat, bolt caps, and flushometer valve
Compliance Certifications -Meets or Exceeds the Following Specifications:• ASME A��2.�9.2 for Vitreous China Fixtures• CAN/CSA International B45
SEE REVERSE FOR ROUGHING-IN DIMENSIONS
To Be Specified:❏ Color: ❏ White ❏ Bone ❏ Silver ❏ Linen ❏ Black❏ Seat: ❏ American Standard #590�.�00 Heavy duty open front less cover ❏ American Standard #5905.�00 Extra heavy duty open front less cover❏ Alternative Seat: ❏ Olsonite #95 open front seat less cover ❏ Church #9500C open front seat less cover❏ Flushometer Valve: ❏ American Standard Selectronic™ #6065.�2�.002 (Top Spud) ❏ American Standard Selectronic™ #6065.222.007 (Concealed Back Spud) ❏ Alternative Flushometer Valve: ❏ Sloan Crown #���-�.2 (Top Spud)
Revised �/08
BARRIER FREE
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE BUILDING FACILITIES - CHECK LOCAL CODES. When installed so top of seat is 432 to 483mm (17" to 19") from thefinished floor.
�4© 2008 AS America Inc.
NOTES:● Toilet designed to meet ADA accessibility standards when top of seat height set at 432 to 483mm (17" to 19") from finished floor.
PRODUCT 335�.�28 AND 3353.�28 SHOWN, 3352.�28 AND 3354.�28 SAME AS EXCEPT WITH SLOTTED RIM FOR BED PAN HOLDING.WASTE OUTLET SEAL RING MUST BE NEOPRENE OR GRAPHITE-FELT (WAX RING NOT RECOMMENDED).SUGGESTED 2mm (�/�6) CLEARANCE BETWEEN FACE OF WALL AND BACK OF BOWL.TO COMPLY WITH AREA CODE GOVERNING THE HEIGHT OF VACUUM BREAKER ON THE FLUSHOMETER VALVE, THE PLUMBER MUST VERIFY DIMENSIONS SHOWN FOR SUPPLY ROUGHING.FLUSHOMETER VALVE NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY.CARRIER FITTING AS REQUIRED TO BE FURNISHED BY OTHERS.PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORT.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A��2.�9.2.These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages
FINISHED WALL
470mm(18-1/2)
C/L OF SEAT POST HOLES140mm(5-1/2) CENTERS
660mm(26)
133mm(5-1/4)
191mm(7-1/2)
(4) 22mm (7/8)DIA. HOLES
356mm(14)
C/L OFOUTLET
FINISHEDFLOOR
32mm(1-1/4)
381mm(15)
330mm(13)
(3/4)19mm
133m
m(5
-1/4
)
95mm(3-3/4)
C/L
229mm(9)
89mm(3-1/2)
76mm(3) DIA. HOLE IN WALL FOR 1-1/2 SPUD
70m
m(2
-3/4
)
283mm(11-1/8)
330mm(13)
FINISHED WALL
470mm(18-1/2)
C/L OF SEAT POST HOLES140mm(5-1/2) CENTERS
660mm(26)
133mm(5-1/4)
191mm(7-1/2)
298mm(11-3/4)
(4) 22mm (7/8)DIA. HOLES
356mm(14)
C/L OFOUTLET
FINISHEDFLOOR
32mm(1-1/4)
381mm(15)
330mm(13)
(3/4)19mm
133m
m(5
-1/4
)
95mm(3-3/4)
C/L
229mm(9)
38mm (1-1/2) DIA. HOLE IN WALL
95mm(3-3/4)
FOR WALLS UP TO 1" IN THICKNESS FOR EACH INCHADDITIONAL THICKNESS OF WALL ADD 25mm (1) TOMEASUREMENT SHOWN
89mm(3-1/2)
1" C.W.T. OR N.P.T. SUPPLYAS REQ'D NOT FURNISHED
121mm(4-3/4)
VACUUM BREAKER
76mm(3) DIA. HOLE IN WALL FOR 1-1/2 SPUD
254mm(10)
41mm(1-5/8)
38mm(1-1/2)
70m
m(2
-3/4
)
283mm(11-1/8)
330mm(13)
FINISHED WALL
470mm(18-1/2)
C/L OF SEAT POSTHOLES 140 mm(5-1/2) CENTER
660mm(26)
73mm(2-7/8)
133mm(5-1/4)
191mm(7-1/2)
292mm(11-1/2)
(4) 22mm(7/8)
HOLES
356mm(14)
C/L OFOUTLET
121mm(4-3/4)
FINISHEDFLOOR
32mm(1-1/4)
381mm(15)
1" N.P.T. OR C.W.T. SUPPLYAS REQUIRED TO FLUSH VALVE
330mm(13)
19mm(3/4)
133mm(5-1/4)
95mm(3-3/4)
70mm(2-3/4)
1-1/2 SPUD
C/L
229mm(9)
FINISHED WALL
470mm(18-1/2)
C/L OF SEAT POSTHOLES 140 mm(5-1/2) CENTER
660mm(26)
73mm(2-7/8)
133mm(5-1/4)
191mm(7-1/2)
292mm(11-1/2)
(4) 22mm(7/8)
HOLES
356mm(14)
C/L OFOUTLET
121mm(4-3/4)
FINISHEDFLOOR
32mm(1-1/4)
381mm(15)
1" N.P.T. OR C.W.T. SUPPLYAS REQUIRED TO FLUSH VALVE
342mm(13-1/2)
19mm(3/4)
133mm(5-1/4)
95mm(3-3/4)
70mm(2-3/4)
1-1/2 SPUD
C/L
229mm(9)
3351.128/3352.128
3353.128/3354.128
AFWALL™ FloWise™ ELONGATED1.28 GPF FLUSHOMETER TOILET
Revised �/08
BARRIER FREE
�5© 2008 AS America Inc.
AFWALL™ FloWise™ ADA RETROFIT 1.28 GPF FLUSHOMETER TOILET
AFWALL™ FloWise™ ADA RETROFIT
• Wall-mounted flushometer valve toilet• Vitreous china• Meets definition for HET (High Efficiency Toilet)• High Efficiency (4.8 Lpf/�.28 gpf)• EverClean™ anti-microbial surface which inhibits the growth of stain and odor causing bacteria, mold, and mildew• Elongated bowl• Powerful direct-fed siphon jet action• Fully-glazed 2-�/8" trapway• �0" x �2" water surface area• Condensation channel• �-�/2" inlet spud• �00% factory flush tested
❏ 3355.128 Elongated bowl only, top spud❏ 3356.128 Elongated bowl only, top spud with slotted rim for bedpan holding (White only)❏ 3357.128 Elongated bowl only, back spud❏ 3358.128 Elongated bowl only, back spud with slotted rim for bedpan holding (White only)
Afwall ADA �.28 replaces standard wall-hung 3.5 or �.6 models and roughs-in at 4�0mm (�6-�/8") rim height to meet ADA with no need to modify the existing carrier or through wall supply (providing centerline of current outlet is �33mm [5-�/4"] above finished floor).
Component Parts:❏ 047007-0070A Inlet spud (furnished with bowl)❏ 736046-100 Flushometer valve rough-in adapter kit (furnished with bowl)
Nominal Dimensions:660 x 356 x 4�9mm(26" x �4" x �6-�/2")
For Top spud bowls, American Standard kit #736046-�00 Flushometer Valve Conversion Kit containing a 25mm (�") chrome-plated street ell, a vacuum breaker, and a 330mm (�3") tail piece included to meet minimum �52mm (6") code between bowl and vacuum breaker.
Recommended working pressure–between25 psi at valve when flushing and 80 psi static
Fixture only, less seat, carrier, bolt caps, and flushometer valve
Compliance Certifications -Meets or Exceeds the Following Specifications:• ASME A��2.�9.2 for Vitreous China Fixtures• CAN/CSA International B45
BARRIER FREE
SEE REVERSE FOR ROUGHING-IN DIMENSIONS
To Be Specified:❏ Color: ❏ White ❏ Bone ❏ Silver ❏ Linen ❏ Black❏ Seat: ❏ American Standard #590�.�00 Heavy duty open front less cover ❏ American Standard #5905.�00 Extra heavy duty open front less cover❏ Alternative Seat: ❏ Olsonite #95 open front seat less cover ❏ Church #9500C open front seat less cover❏ Flushometer Valve: ❏ American Standard Selectronic™ #6065.�2�.002 (Top Spud) ❏ American Standard Selectronic™ #6065.222.007 (Concealed Back Spud) ❏ Alternative Flushometer Valve: ❏ Sloan Crown #���-�.2 (Top Spud)
Revised �/08
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE BUILDING FACILITIES - CHECK LOCAL CODES. When installed so top of seat is 432 to 483mm (17" to 19") from thefinished floor.
�6© 2008 AS America Inc.
AFWALL™ FloWise™ ADA RETROFIT 1.28 GPF FLUSHOMETER TOILET
NOTES:● Toilet designed to meet ADA accessibility standards when top of seat height set at 432 to 483mm (17" to 19") from finished floor.
PRODUCT 3355.�28 AND 3357.�28 SHOWN, 3356.�28 AND 3358.�28 SAME AS EXCEPT WITH SLOTTED RIM FOR BED PAN HOLDING.* REQUIRES AMERICAN STANDARD KIT 736046-�00 TO UPGRADE EXISTING INSTALLATION OF FLUSHOMETER VALVE AND COMPONENTS.WASTE OUTLET SEAL RING MUST BE NEOPRENE OR GRAPHITE-FELT (WAX RING NOT RECOMMENDED).SUGGESTED �/�6 CLEARANCE BETWEEN FACE OF WALL AND BACK OF BOWL.TO COMPLY WITH AREA CODE GOVERNING THE HEIGHT OF VACUUM BREAKER ON THE FLUSHOMETER VALVE, THE PLUMBER MUST VERIFY DIMENSIONS SHOWN FOR SUPPLY ROUGHING.FLUSHOMETER VALVE NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY.CARRIER FITTING AS REQUIRED TO BE FURNISHED BY OTHERS.PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A��2.�9.2.These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
3355.128/3356.128
3357.128/3358.128
Revised �/08
FINISHED WALL
470mm(18-1/2)
C/L OF SEAT POSTHOLES 140 mm(5-1/2) CENTER
660mm(26)
73mm(2-7/8)
133mm(5-1/4)
191mm(7-1/2)
292mm(11-1/2)
(4) 22mm(7/8)
HOLES
356mm(14)
C/L OFOUTLET
121mm(4-3/4)
FINISHEDFLOOR
32mm(1-1/4)
1" N.P.T. OR C.W.T. SUPPLYAS REQUIRED TO FLUSH VALVE
368mm(14-1/2)
19mm(3/4)
142mm(5-5/8)
83mm(3-1/4)
62mm(2-3/8)
1-1/2 SPUD
C/L
229mm(9)
419mm(16-1/2)
FINISHED WALL
470mm(18-1/2)
C/L OF SEAT POSTHOLES 140 mm(5-1/2) CENTER
660mm(26)
73mm(2-7/8)
133mm(5-1/4)
191mm(7-1/2)
292mm(11-1/2)
(4) 22mm(7/8)
HOLES
356mm(14)
C/L OFOUTLET
121mm(4-3/4)
FINISHEDFLOOR
32mm(1-1/4)
419mm(16-1/2)
1" N.P.T. OR C.W.T. SUPPLYAS REQUIRED TO FLUSH VALVE
368mm(14-1/2)
19mm(3/4)
133mm(5-1/4)
83mm(3-1/4)
62mm(2-3/8)
1-1/2 SPUD
C/L
229mm(9)
FINISHED WALL
470mm(18-1/2)
C/L OF SEAT POST HOLES140mm(5-1/2) CENTERS
660mm(26)
133mm(5-1/4)
191mm(7-1/2)
298mm(11-3/4)
(4) 22mm (7/8)DIA. HOLES
356mm(14)
C/L OFOUTLET
FINISHEDFLOOR
32mm(1-1/4)
368mm(14-1/2)
(3/4)19mm
142m
m(5
-5/8
)
83mm(3-1/4)
C/L
229mm(9)
38mm (1-1/2) DIA. HOLE IN WALL
95mm(3-3/4)
FOR WALLS UP TO 1" IN THICKNESS FOR EACH INCHADDITIONAL THICKNESS OF WALL ADD 25mm (1) TOMEASUREMENT SHOWN
89mm(4)
1" C.W.T. OR N.P.T. SUPPLYAS REQ'D NOT FURNISHED
121mm(4-3/4)
VACUUM BREAKER
76mm(3) DIA. HOLE IN WALL FOR 1-1/2 SPUD
254mm(10)
41mm(1-5/8)
38mm(1-1/2)
62m
m(2
-3/8
)
419mm(16-1/2)
FINISHED WALL
470mm(18-1/2)
C/L OF SEAT POST HOLES140mm(5-1/2) CENTERS
660mm(26)
133mm(5-1/4)
191mm(7-1/2)(4) 22mm (7/8)
DIA. HOLES
356mm(14)
C/L OFOUTLET
FINISHEDFLOOR
32mm(1-1/4)
419mm(16-1/2)
368mm(14-1/2)
(3/4)19mm
133m
m(5
-1/4
)
83mm(3-1/4)
C/L
229mm(9)
127mm(5)
76mm(3) DIA. HOLE IN WALL FOR 1-1/2 SPUD
62m
m(2
-3/8
)
320mm(12-9/16)
367mm(14-7/16)
BARRIER FREE