1
E03131 MACHINERY INFORMATION : - Tyres/UC : PEGSON Brand Serial No. Year : : 2013 Model : Telsmith 14x24 Weight : 6700.00 kg Hour meter reading : 0.00 Ref No. : E03131 2013 Manufactured modular mounted Pegson/Telsmith (Refurbished) 14x24" (600x420mm) single toggle jaw crusher, capacity up to 55 tph, output 25-75mm. Can be used in primary or secondary application.c/w 45kw electric motor, full set of flywheel gaurds complete with inspection doors on drive side pully. New fabricated rock chute. Electric Panel, framework, feeder, hopper, conveyors, screens etc can be supplied to customers specification to suit this unit at extra cost. Page 1 of 1 Delta Machinery is a member of Van Dijk Heavy Equipment BV. All our services, supplies and transactions are subject to the terms of Van Dijk Heavy Equipment BV filed with the Chamber of Commerce in Eindhoven, the Netherlands under number 17078066 dated November 21th, 2012. On request we will send a copy free of charge. The information transmitted is intended only for use by the addressee and may contain confidential and/or privileged material. Delta Machinery Haven M529, Port of Moerdijk Mark S. Clarkelaan 6 4761 RK Zevenbergen, Netherlands Tel. +31 888 966 966 Fax +31 888 966 950 [email protected] www.deltaheavymachinery.com KvK/CoC 17078066 BTW/VAT/TVA/UST NL802430685B01

MACHINERY INFORMATION E03131 · 2013 Manufactured modular mounted Pegson/Telsmith (Refurbished) 14x24" (600x420mm) single toggle jaw crusher, capacity up to 55 tph, output 25-75mm

  • Upload
    others

  • View
    13

  • Download
    0

Embed Size (px)

Citation preview

E03131 MACHINERY INFORMATION

: -Tyres/UC

: PEGSONBrand

Serial No.Year :: 2013

Model : Telsmith 14x24Weight : 6700.00 kgHour meter reading : 0.00

Ref No. : E03131

2013 Manufactured modular mounted Pegson/Telsmith (Refurbished) 14x24" (600x420mm) single toggle jaw crusher,capacity up to 55 tph, output 25-75mm. Can be used in primary or secondary application.c/w 45kw electric motor, full setof flywheel gaurds complete with inspection doors on drive side pully. New fabricated rock chute. Electric Panel,framework, feeder, hopper, conveyors, screens etc can be supplied to customers specification to suit this unit at extracost.

Page 1 of 1

Delta Machinery is a member of Van Dijk Heavy Equipment BV. All our services, supplies and transactions are subject to the terms of Van Dijk Heavy Equipment BV filed with the Chamber of Commerce in Eindhoven, the Netherlands undernumber 17078066 dated November 21th, 2012. On request we will send a copy free of charge. The information transmitted is intended only for use by the addressee and may contain confidential and/or privileged material.

Delta MachineryHaven M529, Port of MoerdijkMark S. Clarkelaan 64761 RK Zevenbergen, Netherlands

Tel. +31 888 966 966Fax +31 888 966 [email protected]

KvK/CoC 17078066BTW/VAT/TVA/UST NL802430685B01