2MACHINE TOOL INDUSTRY SOLUTIONS BIJUR DELIMON INTERNATIONAL

MACHINE TOOLINDUSTRY SOLUTIONS

Bijur Delimon International has been partners with some of the largest machine tool makers in the history of the industry.

The expertise we have gained working with these OEMs has helped us compile a product range that fi ts what the machine tool industry

demands. From automatic pumps to manual pumps and meter units to adjustable injectors, Bijur Delimon has the total package.

And not only do we manufacture products that have been tried and tested in the fi eld, we have a capable support team ready to assist you.

Our world-class engineering staff can help you with installation questions as well as system design. Our technically-savvy customer

support team is ready to help with product questions or identifi cation. And our regional sales managers are more than willing to provide

assistance in the fi eld on whatever lubrication issue you may have.

World-class Machine Tool Builders

Use Bijur Delimon

Compumachine Husky

Davenport International Screw Machine

Fadal Komo

Giddings & Lewis Mazak

GTI Spindle Milltronics

Haas Moore Tool

Hardinge Royal Master Grinder

Harig Tornos

Use Bijur Delimon Lubrication on

Many Types of Machine Tools

Automatic screw machines

Boring machines

Drill presses

Gear cutting machines

Grinding machines

Honing machines

HMCs

Lathes

A typical application for a Single Line Resistance

system on a vertical milling machine.

Company Overview

Sin

gle

Lin

e R

esi

sta

nce

Low pressure oil lubrication systems designed for

light, medium and heavy machinery requiring up to

100 points of lubrication. Two types of systems

(automatic and manual) are available to meet the

needs of virtually any industrial application.

Automatic systems are suited for machinery

requiring an uninterrupted discharge of oil, either

regularly timed or continuous. They are actuated by

a self-contained timing mechanism or by a mechani-

cal drive mechanism connected to the equipment

being lubricated.

Manual systems are suited for machinery which can

be lubricated by a hand-actuated, intermittently-fed

oil discharge system on an occasional basis.

Advantages:

Compact size +

Economical pricing +

Simple to operate +

and maintain

Reliable operation +

Po

siti

ve D

isp

lace

me

nt

Inje

cto

rs

Higher pressure oil and grease systems gives you

the ability to apply a precise amount of lubricant

exactly where it is needed. Systems can be electric,

pneumatic or manual and can be deployed easily

on machine tools, metal forming, printing, packag-

ing, injection molding and mobile equipment

machinery. Most injectors can be adjusted to your

lubrication demands.

SureFire™, our award-winning PDI lubricator, is

available in a variety of reservoir sizes and motor

voltages. Connect the ZEM Series injectors, and

create an adjustable system that gives you precise

lubrication that can change as often as your

needs change.

Advantages:

Robust design +

Reliable operation +

Economical pricing +

Adjustable outputs +

Precise delivery +

Simple to install and +

maintain

Air

/oil

Lu

bri

cati

on

The HyperFormance™ Air/Oil lubricating system

delivers high-effi ciency lubrication and cooling for

high-speed spindles and other surfaces requiring

accurate oil delivery. This type of system eliminates

the residual drift and the dangerous “oil fog” and

“oil mist” during operation.

The system utilizes a specially designed positive

displacement injector with oil outputs to a close

tolerance level down to 0.01cc/cycle. This permits

exact oil volumes to be discharged into an air mixing

valve. Controlled air and oil then fl ows through a

clear plastic tubing to critical bearing points.

Advantages:

Reduced oil usage +

Protect bearings from +

contamination

Lower operating +

temperatures

Extend bearing life +

Precise output +

Systems & Products

1 BIJUR DELIMON INTERNATIONAL MACHINE TOOL INDUSTRY SOLUTIONS

Innovators of engineered lubrication technology since 1923

Bijur Delimon International has ISO 9001:2000 and ISO 14001:2000 quality certifi ed

manufacturing facilities around the world, so your centralized lubrication system

meets the highest industry quality standards. It’s all part of our commitment to quality

and customer service.

GLOBAL HEADQUARTERS

Bijur Delimon International

2100 Gateway Centre Blvd., Suite 109

Morrisville, NC 27560 IND2 • 09/08