machine shop Catalog

The premier source of tooling, parts, and accessories for bench top machinists.

C A T A L O G

N I N E T E E N

www.LittleMachineShop.com (800) 981 9663

396 W Washington Blvd #500 • Pasadena CA 91103 Email: [email protected]

Welcome to LittleMachineShop.com…

…the premier source of tooling, parts, and accessories for bench top machinists.

Our products include:

Machines

CNC milling machines Mini lathes Mini mills

Accessories

Ball turning attachments Coolant spray units Lathe chucks Milling attachments Quick change tool posts Rotary tables Tool post grinders

Measuring

Coaxial centering indicators Dial indicators Dial test indicators Electronic digital calipers Laser edge and center finders Machinist’s levels Magnetic bases

Cutting Tools

Boring bars Center drills Cut-off blades End mills Indexable tools Tool bits

Tooling

Boring heads Clamping kits Collet chucks and closers Collets (MT, R8, 5C, 3C, ER) Drill chucks End mill holders Knurlers Live & dead centers Mill quick change tooling Thin parallels Vises

Upgrades & Conversions

Air spring conversion kits Bed extension kits Belt drive conversion kits Digital position readouts Mini mill power feed kits Tachometers Tailstock cam lock kits Tweaks & Enhancements Kits

Plus

DVDs, videos, and books Model kits and plans Spare parts kits Spindle head assemblies Starter kits X-Y table assemblies Replacement parts

We focus on tools, accessories, and replacement parts for:

• Bench top lathes sold by LittleMachineShop.com, Grizzly Industrial, Harbor Freight Tools, Homier, Micro-Mark, ToolsNow.com (Cummins), and others

• Bench top milling machines sold by LittleMachineShop.com, Grizzly Industrial, Harbor Freight Tools, Homier, Micro-Mark, ToolsNow.com (Cummins), and others

• Blades for 4×6 Band Saws sold by Grizzly Industrial, Harbor Freight Tools, Homier, and others

Visit our Web site at www.littlemachineshop.com to see large, full-color pictures along with more products and more information than we can fit in this catalog.

Besides the products shown in this catalog, we have virtually every replacement part for the mini lathes, mini mills, and micro mills sold by LittleMachineShop.com, Grizzly Industrial, Micro-Mark, Homier, Harbor Freight, and ToolsNow.com (Cummins). Visit our Web site at www.LittleMachineShop.com to find the parts you need.

Check our Web site at www.littlemachineshop.com for current prices. Prices are subject to change without notice. Sale prices in this catalog are valid for a limited time only.

Contents

CNC MachinesAccessories 14

CNC Milling Machines 15

Software 15

Collets and Chucks3C Collets 16

5C Collets 16

Brown & Sharpe Collets 17

ER Collets 17

Morse Taper Collets 18

R8 Collets 19

Taig Collets 19

Coolant SystemsCoolants & Lubricants 20

Flood Systems 20

Mist Systems 21

Cutting ToolsBoring Bars 22

Cut-Off Tools 22

Drill Sets 23

Drills 24

End Mills 24

Engraving Tools 25

Indexable Inserts 26

Reamers 26

Rotary Broaches 27

Saw Blades 28

Screw Extractors 29

Taps & Dies 29

Threading 31

Turning Tools 31

DROsDisplays 34

DRO Packages 34

Scales 35

KitsConversion Kits 35

Spare Parts Kits 39

Starter Kits 40

Lathe10x21 Lathe (C6) Accessories 43

4x5 Micro Lathe (C0)/Unimat Accessories

43

7x10/12/14 Mini Lathe (C2/C3) Accessories

44

7x10/12/14 Mini Lathe (C2/C3) Assemblies

47

9x20 Lathe Accessories 48

Tool Post Grinders 48

Tooling 49

Lathe ChucksAccessories 50

Adapters 51

Chucks 52

MachinesLathes 53

Mills 54

MillMicro Mill (X1) Accessories 54

Mini Mill (X2) Accessories 54

Mini Mill (X2) Assemblies 55

Quick Change Tooling 56

Sherline/Taig Mill Accessories 58

Small Mill (X3/SX3) Accessories 59

Tooling 59

ModelsFlywheels 62

Fully Assembled & Kits 62

PrecisionCalipers 63

Edge and Center Finders 66

Layout 69

Measuring 74

Sets 88

Setup 89

Project PlansBoats 91

Conversions 91

Engines 91

Tools 92

QC Tool PostsQCTP Sets 93

Rotary TablesRotary Tables 96

ToolingArbors and Sleeves 98

Clamping Kits 99

Drill Chucks 101

Tools & ThingsAbrasives 102

Adhesives 103

Apparel 103

Coolants & Lubricants 103

Gift Certificates 104

Lights 104

Things 105

Threading Tools 105

Tools 108

X-Y Tables 111

Videos and BooksBooks 111

Videos 112

VisesAccessories 120

Milling Vises 120

Other Vises 121

Screwless Vises 122

3501 CNC Milling Machine

The LittleMachineShop.com model 3501 CNC Milling Machine provides a complete CNC solution. It’s not a conversion or adaptation; these machines are designed and built by the factory as CNC machines.

The LittleMachineShop.com CNC milling machine is perfect for the bench top machinist who wants to create parts and not just build a CNC machine. The power supplies and controllers are built into the mill. No extra cabinets, cables, or connectors are required. Add the optional model 3789 computer and you have a complete CAD/CAM/CNC package with fully-licensed software. The CNC milling machines even include a 4th axis driver so you can add a 4th axis rotary table by simply plugging it in.

Specifications

End Milling Capacity 0.4" (10 mm)

Face Milling Capacity 0.8" (20 mm)

Drilling Capacity 0.4" (10 mm)

Table Size 15" × 5.38" (384 mm × 137 mm)

X- Axis Travel 10.2" (260 mm)

Y-Axis Travel 4.3" (110 mm)

Z-Axis Travel 7.1" (180 mm)

Throat 5.1" (130 mm)

X-axis & Y-axis motors NEMA 23 12 lb-in (1.35 Nm) torque

Z-axis motor NEMA 23 19.5 lb-in (2.2 Nm) torque

Positioning Accuracy 0.0005" (0.01 mm)

Spindle Taper 2 Morse taper

Spindle Motor 0.67 hp (500 W) brushless DC

Spindle Speed 100–7000 RPM

Power Requirements 120 V 60 Hz 6.3 Amps

Machine Weight 190 lb (86.4 kg)

Overall Dimensions (W × D × H)

24.8" × 24.8" × 24.8"

(630 mm × 630 mm × 630 mm)

Includes Mach 3 CNC software license

Class 5 precision hardened and ground

ball screws

Direct drive NEMA 23 hybrid stepper

motors

Zero backlash jaw couplings

Three stepper drivers for X,Y, and Z axes

Extra stepper driver for 4th axis pre-

wired with external socket

Variable spindle speed under full CNC

control

Synchronous belt spindle drive (no gears)

Limit switches and homing on all three

axes

Parallel interface board optically isolates

the machine from the computer

Emergency e-stop switch and chuck guard

switch

CE marking (comparable to UL listing)

CNC controlled coolant pump receptacle

$3,495.00

Options

3789 Pentium 4 Computer includes the computer, a 17" flat screen monitor, plus keyboard and mouse. It comes with a fully licensed copy of Dolphin CAD/CAM. $895.00

3519 4th Axis Rotary Table The 4th axis rotary table plugs right into the model 3501 CNC Milling Machine, which includes the 4th axis driver. The rotary table is 4" in diameter, has a rotational accuracy of 5 seconds and backlash less than 0.002" (0.05 mm) adjustable to less than 0.0005" (0.01 mm) $750.00

4100 HiTorque 7x12 Mini Lathe

The LittleMachineShop.com HiTorque Mini Lathe is the best in its class. It has the most power, most torque, and a longer center distance than competitors’ lathes.

The 500 Watt brushless spindle drive motor provides tremendous low-end torque. And you can vary the speed from 50 RPM to 2500 RPM continuously in both directions. There are no gears to shift.

The cross feed and compound rest dials are graduated in 0.001" and 0.025 mm. The lathe is equipped with a 4-way indexing tool post set for 5/15" (8 mm) tools.

Real top and bottom half-nuts and a reversible 16 TPI lead screw provide extended threading capability. You can create every American Standard Unified class 2A inch screw thread from 4 to 80 threads per inch, and you can create every American Standard Metric class 6h thread from 0.3 to 8 mm pitch with the extra 21 tooth change gear that is included. $639.95

Includes Mini Lathe Users Guide written

by Chris Wood

500 Watt output spindle motor

No gears in spindle drive

E-stop safety power switch

Extended threading capability - inch and

metric threads

Rear apron shield to keep swarf out of the

mechanism

Cam lock tailstock

Four-way tool post

Zero-resettable dials graduated in inches

and mm

Reversible lead screw for right and left

hand threads

Specifications

Swing Over Bed 7" (180 mm)

Swing Over Saddle 4.3" (110 mm)

Distance Between Centers

12.2" (310 mm)

Spindle Through Hole 0.8" (20 mm)

Spindle Motor Output 0.7 hp (500 Watts)

Range of Threads 4-80 TPI (0.3-8 mm)

Spindle Taper #3 Morse taper

Tailstock Taper #2 Morse taper

Spindle Speed 50 - 2500 RPM

Power Requirements 120 V 60 Hz 8 Amps

3900 HiTorque Mini Mill

The LittleMachineShop.com HiTorque Mini Mill is the best in its class. It has the most power, most torque, and a larger table than competitors’ mills.

The 500 Watt brushless spindle drive motor provides tremendous low-end torque. And you can vary the speed from 50 RPM to 2500 RPM continuously. There are no gears to shift. And, with no gears, the HiTorque Mini Mill is the quietest in its class.

The large mill table provides 50% more table area than other mini mills. It also has 30% more travel in each direction. The resettable feed dials allow you to zero them at any point.

The HiTorque Mini Mill has drill press handles for drilling and fast motion of the mill's head. It also has Z-axis fine feed with 0.001" resolution for milling operations.

500 Watt output spindle motor

Large X-Y table

R8 Spindle for wide tool

availability

Column tilts 45° either side of vertical

Dovetail column maintains head alignment at

any height

Fine feed on Z-axis for precise control

Three radial handles for drilling

E-stop safety power switch

Adjustable Z-axis stop for repetitive

drilling

Neoprene bellows protect horizontal ways

Adjustable gibs on all dovetail ways

$649.95

Specifications

End Milling Capacity 0.6" (16 mm)

Face Milling Capacity 1.2" (30 mm)

Drilling Capacity 0.5" (13 mm)

Table Size 18.1" x 4.7" (460 mm x 120 mm)

T-slots 3 slots 0.47" (12.0 mm) wide

X-Axis Travel 11.8" (300 mm)

Y-Axis Travel 5.1" (130 mm)

Z-Axis Travel 9.3" (235 mm)

Throat 6.5" (165 mm)

X- and Y-Axis Feed Screws

0.062" (1.59 mm) per rotation

Head Tilt 45°- 0° - 45°

Positioning Accuracy 0.0004" (0.010 mm)

Spindle Taper R8

Spindle Motor 0.67 hp (500 Watts)

Spindle Speed 100 - 2500 RPM

Power Requirements 120 V 60 Hz 8 Amps

New Products in this Catalog

Part no. Product Price Page4087 Machinist Calc Pro Machinist's Calculator $69.95 1053999 Arbor, Drill Chuck R8 to 2JT $11.95 993979 Chip Brush, 1" $0.79 1083981 Chip Brushs, 1" wide, 36 Pieces $18.95 1083980 Chip Brushs, 1" wide, 6 Pieces $2.95 1084002 CNC Machining Handbook $58.95 1114003 CNC Programming Handbook, Third Edition $74.95 1113976 Digital Position Readout, 2-Axis DRO Pros Mill $599.00 344001 Drawbar, 3MT x 3/8-16, HiTorque Mini Lathe $4.29 453977 Drill Set, #61-80 Jobber Length HSS $16.95 234077 DVD: Building a Horizontal Steam Engine $19.95 1133962 DVD: Lathe Tool Sharpening and 1/4" Tool Bits $42.90 1153964 DVD: Lathe Tool Sharpening and 3/8" Tool Bits $54.90 1153963 DVD: Lathe Tool Sharpening and 5/16" Tool Bits $43.90 1153965 Edge and Center Finder, Laser 3/8" Shank AC Powered $152.50 683966 Edge and Center Finder, Laser 3/8" Shank Concentric Circles $157.50 683536 HiTorque 8.5x16 Lathe 1,249.95 533978 J-B Weld $5.95 1033986 Loctite 222 Purple Low Strenght Threadlocker for Small Fasteners $12.95 1033987 Loctite 242 Medium Strength Blue Threadlocker $12.95 1033988 Loctite 271 High Strength Red Threadlocker $12.95 1033989 Loctite 7649 Primer for Threadlockers $10.95 1033994 Lubriplate 3-V Machine Tool Oil $15.95 1033984 Lubriplate 630-AA Lithium Grease $8.95 1033970 Set Screws, Tool Retaining, Set of 10 $7.95 944078 Tooling Plate for Large Table Mini Mills $109.95 553969 Vise, 3" Precision Milling Plus Parallels and Mounting Kit $129.85 120

Supercharge Your Mini Lathe

Trick out your mini lathe with accessories from LittleMachineShop.com.

Part no. Product Price Page2258 Air Spring Conversion Kit $39.95 352568 Ball and Radius Turning Tool, Large, OMW $139.95 492569 Ball and Radius Turning Tool, Small, OMW $89.95 491970 Ball Turning Attachment $47.95 491928 Bed Extension Kit 14" $149.95 352977 Carriage Lock, Mini Lathe $35.95 442705 Carriage Stop, Adjustable $24.95 442222 Digital Position Readout, 2-Axis Mini Lathe $149.95 342419 Follower Rest, Ball Bearing $54.95 451198 Follower Rest, Mini Lathe $26.95 451911 Knurler, Large Capacity $39.95 492909 Metal Gear Kit for Mini Lathe & Mini Mill $71.60 363446 Metal Gear Kit, Mini Lathe Complete $195.95 371681 Milling Attachment, Mini Lathe $159.95 461956 Milling Attachment, Taig $62.95 462383 Mini Lathe 20 TPI Feed Screw Parts $54.95 371815 Motor Controller Upgrade Kit $144.95 371817 Motor Controller Upgrade Kit, Harbor Freight Rocker Switch $164.95 372592 Power Switch Upgrade Kit $4.95 382461 Quick Change Tool Post Set by A2Z CNC $99.95 931672 Quick Change Tool Post Set, Micro $224.95 953112 Quick Change Tool Post Set, Tormach 0XA $129.95 962935 Rotary Tool Mount $24.95 462418 Steady Rest, Ball Bearing $66.95 461197 Steady Rest, Mini Lathe $29.95 461684 Tachometer, Spindle $77.95 472658 Tachulator Tachometer & SFM Meter $99.95 502018 Tailstock Cam Lock Kit $29.95 381877 Tailstock Turret Tool Holder, 2MT $69.95 501275 Tool Post Grinder $239.95 482001 Tool Post Grinder $114.95 482634 Tweaks & Enhancements Kit™, Mini Lathe $19.95 39

Value Packs

Value packs offer tremendous savings over buying individual items. Get everything you need to get started using your benchtop lathe or milling machine.Starter Kits get you some basics to help get you going.Tooling Packages provide everything you need to start making chips with your lathe or milling machine.

Part no. Product Price Page1259 Measurement Starter Kit with Dial Caliper $29.95 881260 Measurement Starter Kit with Digital Caliper $39.95 883766 Milling Attachment Package, Mini Lathe $184.95 463825 QC Turning Tool holder, A2Z CNC, Pack of 4 $67.00 931931 Rotary Table, 4" with Tailstock & Dividing Plate $349.95 962183 Rotary Table, 4" with Tailstock & Dividing Plate $239.95 973131 Rotary Table, 4" with Tailstock, Dividing Plate, & 3-Jaw Lathe

Chuck$299.95 97

3791 Rotary Table, 4" with Tailstock, Dividing Plate, & 3-Jaw Lathe Chuck

$429.95 96


$289.95 97


$414.95 96

2329 Rotary Table, 6" with Tailstock & Dividing Plate $399.95 981796 Starter Kit, Lathe (3/8" Tool Bits) $25.95 402653 Starter Kit, Micro Mill $78.95 401261 Starter Kit, Mini Lathe (5/16" Tool Bits) $22.95 401262 Starter Kit, Mini Mill $79.95 403491 Tooling Package, 2MT Micro Mill $229.95 403869 Tooling Package, 3501 CNC Mill $229.95 413490 Tooling Package, 3MT Mini Mill $299.95 423534 Tooling Package, 8x12, 8x14 Lathe $159.95 413786 Tooling Package, 9x20 Lathe $224.95 423514 Tooling Package, Atlas/Craftsman 6" Lathe $159.95 413486 Tooling Package, Mini Lathe $159.95 413489 Tooling Package, R8 Mini Mill $273.95 423527 Tooling Package, Small Lathe $219.95 423526 Tooling Package, X3 Mill $299.95 43

Rotary Tables

We carry a full range of small rotary tables. Dividing plate sets are available for all of our rotary tables if you want to do indexing. We also have tailstocks for all the rotary tables.

1810 Rotary Table, 4″ Precision $169.95 2183 Rotary Table, 4″ with Tailstock & Dividing Plate $239.95 3131 Rotary Table, 4″ w/Tailstock, Dividing Plate, 3-Jaw Chuck $299.95 3132 Rotary Table, 4″ w/Tailstock, Dividing Plate, 4-Jaw Chuck $289.95 1927 Rotary Table, 4″ H/V $249.95 3791 Rotary Table, 4″ w/Tailstock, Dividing Plate, 3-Jaw Chuck $429.95 3792 Rotary Table, 4″ w/Tailstock, Dividing Plate, 4-Jaw Chuck $414.95 1727 Rotary Table, 4" Phase II $279.95 1931 Rotary Table, 4″ with Tailstock & Dividing Plate $349.95 2326 Rotary Table, 6″ Precision $249.95 2329 Rotary Table, 6″ with Tailstock & Dividing Plate $399.95 1787 Rotary Table, 6″ Phase II $295.95

See details about rotary tables beginning on page 96 and on page 124.

A2Z CNC Quick Change Tool Post Sets

This Quick Change Tool Post set works with many small lathes.

Made from 6061 T6 Aluminum

Hard Anodized for durability and appearance

No tools required to change tools

Additional tool holders available

The tool post set includes 2 turning holders, a boring bar holder, and a cut-off tool holder. The turning tool holders accept tools up to 3/8" square. The boring bar holder takes boring bars with a 3/8" round shank. The cut-off tool holder uses 1/2" tall cut-off blades.

Mounting kits are available for 7×10, 7×12, and 7×14 mini lathes, Sherline, Taig, Prazi, Emco, Unimat, and Atlas 6" lathes. A2Z CNC tool holders fit TS Engineering and Phase II Hobby tool posts.

2461 7×10, 7×12, and 7×14 $99.95 2486 Atlas/Craftsman 6" $99.95 2488 Prazi and Emco $99.95 2477 Sherline $99.95 2478 Taig $99.95 2487 Unimat 3 & 4, SIEG C0 $99.95 2271 9×20 $99.95 2713 8×12 and 8×14 $99.95 3474 SIEG C4 $99.95 2484 3/8" Boring Tool Holder $19.75 2587 1/2" Boring Tool Holder $21.75 2485 Cut-Off Tool Holder $21.75 2483 Turning Tool Holder $17.25 3825 Turning Tool Holders, Pack of 4 $67.00 3445 Blank Tool Holder $13.50

See the complete line of quick change tool post sets on pages 93–96.

CNC Machines: Accessories

$750.00● Includes stepper motor● Includes tailstock● Includes adapter to mount a 3" lathe chuck● Includes hold down clamps to mount the rotary table on 3501 and 3503 CNC Mills.The 4th axis rotary table plugs right into the model 3501 and 3503 CNC Milling Machine, which includes the 4th axis driver.Diameter - 4"Capacity - 5 kgMaximum Torque with 1.35 N/m motor - 54 N/mThru Hole - 12mmHorizontal - YesVertical - YesVertical Center Height - 2.68"Ratio - 40 to 1Net Weight - 12kgsRotational Accuracy - 5 secondsBacklash - Less than 0.05 mm, and within 0.01 mm after adjustmentRepeatability - 0.01 mmT-Slot Size - 8mm

4th Axis Rotary Table for CNC3519

4th Axis Rotary Table for CNC, No Stepper Motor3429 $600.00

$995.00The model 3616 Pentium 4 Computer includes the computer, a 17" flat screen monitor, plus keyboard and mouse. It comes with fully licensed copies of Mach3 and Dolphin CAD/CAM. The software licenses alone are worth more than the total cost of the computer.This computer includes a parallel port on the motherboard, and is guaranteed to work with the LittleMachineShop.com CNC milling machines.Mach3 converts a standard PC into a fully featured, 6-axis CNC controller.Dolphin PartMaster CAD/CAM creates complete programs for CNC milling machines and machining centers. PartMaster is completely icon driven so that no programming language needs to be learned.

Computer, Pentium 4 with Software Package3616

Computer, Pentium 43657 $595.00Computer, Pentium 4 with Dolphin CAD/CAM Software3789 $895.00

$89.95● The ideal MACH3 configurable accessory● USB Interface● Setup software included● Complete jog pendentThe Z-Bot Jog Dial II replaces the hand cranks on CNC mills.The Z-Bot Jog Dial II is a USB jog pendent controller developed to work in conjunction with the popular Mach3 CNC control software. It is supplied with an installation disc that contains a Mach3 custom plug-in. The Jog Dial II is highly flexible, easy to use, requires minimal configuration, and does not use any parallel port pins. The Jog Dial II USB controller has an inner and outer dial. Used for rapid coarse positioning, the outer dial will jog progressively faster, up to the full jog speed configured in Mach 3, as the dial is turned further to the right or left of the center detent. The outer dial springs back to center position when released. Used for fine positioning, the inner dial jogs the machine one step increment, as configured in Mach3 for each "click." Four buttons are used to select the axis to jog. The fifth button is easily configured for a variety of Mach3 functions using the plug-in supplied.

Jog Dial for CNC Machines3414

Page 14(800) 981 9663 LittleMachineShop.com

CNC Machines: CNC Milling Machines

CNC Machines: CNC Milling Machines

$3,649.00● Complete factory-built CNC milling machine● 2/3 Horsepower spindle motor drives 2 Morse taper spindle● Electronics are built in to the machine● Fourth axis driver included at no extra charge● Includes fully-licensed copy of Mach 3 softwareThe LittleMachineShop.com model 3501 CNC Milling Machine is a complete CNC solution. It’s not a conversion or adaptation; this machine is designed and built by the factory as a CNC machine.The Model 3501 now includes a one-shot lubrication system and an improved mill table that facilitates the use of flood coolant.Up until now, hobby CNC has required that you make or buy a conversion of a manual milling machine. You had to integrate the mill, ball screws, stepper motors, drivers, power supplies, and breakout boards. Most people don’t even know what those things are, much less how to integrate them into a working CNC machine.The LittleMachineShop.com model 3501 is the perfect mill for the bench top machinist who wants to create parts and not just build a CNC machine. The power supplies and controllers are built into the mill. No extra cabinets, cables, or connectors are required. Add the optional model 3616 computer and you have a complete CAD/CAM/CNC package with fully-licensed software. The model 3501 CNC milling machine even includes a 4th axis driver so you can add a 4th axis rotary table by simply plugging it in.With powerful NEMA 23 hybrid stepper motors connected by zero backlash jaw couplings to precision-ground ball screws, the model 3501 can achieve positioning accuracy to 0.0005". Not many hobby-grade machines can make a claim like that. It will machine at up to 20 inches per minute and rapid traverse at up to 80 inches per minute.A 2/3 horsepower closed loop brushless DC spindle motor and synchronized belt drive takes the spindle from 100 to 7000 RPM under full CNC control. A one-shot oiler with flexible shielded lube distribution tubing takes care of daily lubrication with a single press of a lever. With a work envelope of 10.2" (X-axis) × 4.3" (Y-axis) × 7.1" (Z-axis) the model 3501 has large capabilities in a small machine. And at 190 pounds, you know it is not a toy. The mill table is 15" × 5.38", giving you plenty of room to mount your work and fixtures. The coolant catch tray on the table and the pan under the machine make the use of flood coolant practical. A software controlled receptacle on the back of the machine provides CNC control of the optional coolant pump.And we haven’t forgotten your safety. The model 3501 carries the CE marking, the European counterpart to UL listing. A safety E-stop button right on the front and the interlocked spindle shield shut down the mill instantly.The LittleMachineShop.com model 3501 CNC Milling Machine is a version of the SIEG KX1.

Milling Machine CNC3501

CNC Machines: Software

$395.00● Professional grade software at hobby-afordable price● Create and machine 2D & 2.5D geometry● CAD software crates drawings● CAM software creates G-codePartmaster Pro Milling is a fully functional machining module that creates and machine 2D & 2.5D geometry. It's complete 2 axis & 3 axis and also allows some 4 axis machining. Upgraded engraving features are also included. You may also import dxf files and create the toolpath directly.With Dolphin CAD/CAM, everyone from the hobbyist that works in their garage or borrows their employers machine to the huge corporations that have multiple machining centers can take advantage of this advanced technology at a reasonable cost. With the Ease of Use and Fast Learning Curve, you will find it easy to start cutting your parts. Dolphin CAD/CAM USA offers this CAD/CAM software technology for Mills, Lathes, Routers, Wire EDM, Lasers, Plasmas, Waterjets, and many more machines that are used in the industry today.This is a license for hobby use only. For a commercial license, see our PN 3831.

CAD/CAM Software, Dolphin Partmaster PRO Hobby License3655

Dongle, Dolphin Partmaster PRO 3816 $150.00


CNC Machines: Software

$175.00● Converts a standard PC to a fully featured, 6-axis CNC controller● Allows direct import of DXF, BMP, JPG, and HPGL files through LazyCam● Visual Gcode display● Generates Gcode via LazyCam and Wizards● Fully customizable interfaceThis product is a license to use any version of Mach software. You must download the Mach 3 software from www.machsupport.com. This ensures that you have the most recent version of Mach 3.You will receive a license file on a USB flash drive. Support for Mach 3 is provided on www.machsupport.com. There you will find forums, tutorials, documentation, and such. There is no telephone support available.

Mach 3 CNC Software License3652

Collets and Chucks: 3C Collets

$99.953C collet closer for 7x10 and 7x12 lathes. This set includes a 3 Morse taper to 3C collet adapter and a drawtube assembly.The adapter is precision ground to minimize runout.

Collet Closer, 7x10, 7x122244

Collet Adapter, 3MT to 3C2240 $59.95Collet Closer, 7x142374 $99.95Collet Closer, Universal2728 $99.95

$69.95● Set of seven 3C round collets range in size from 1/8" to 1/2" by 16ths● Includes 1/8", 3/16", 1/4", 5/16", 3/8", 7/16" and 1/2"● Made of high grade tool steel● Hardened and ground to close toleranceThe thru bore of the collets is 0.467". The 1/2" collet is bored to 1/2" by 0.66" deep. All the other collets will pass the full material size through the length of the collet.

Collets, 3C Set of 71991


$44.95● Holds standard 5C collets● Economical indexing for 2, 3, 4, and 6 divisions● Easy cross drilling at 60°, 90° and 120°● Made of hardened tool steel● Ground square and parallel within 0.0005" all overThis set includes five pieces, the square block, the hexagonal block, two quick acting rings and the lever operated collet closer.

Collet Block Set, Hex and Square3190

$199.95● Plain back collet chuck mounts like a lathe chuck● 5" (130 mm) diameter● 1/16" to 1 1/8" capacity with appropriate collets● Through hole is 1.231"This 5C collet chuck mounts with three holes for M8 cap screws. They are through drilled and counterbored for bolting on from the front. The registration inset is 95 mm in diameter.

Collet Chuck for 5C Collets3047

Tap & Tap Drill Bit, M8x1.25 Metric Thread3901 $8.95

$9.95● Includes 5C collet stop, 2 spring ejector tips, and 2 static tips● Tips are under 1/4" and under 5/8" diameter● Speed up repetitive work

Collet Stop, 5C with Tips3619



$29.95● Set of six 5C round collets range in size from 1/8" to 3/4" by 8ths● Includes 1/8", 1/4", 3/8", 1/2", 5/8" and 3/4"● Made of high grade tool steel● Hardened and ground to close tolerance● Internally threaded for a work stop

Collets, 5C Set of 61708

Collet, 1" 5C3482 $6.95Collet, 1/2" 5C3478 $6.95Collet, 1/4" 5C3476 $6.95Collet, 3/16" 5C3670 $6.95Collet, 3/4" 5C3480 $6.95Collet, 3/8" 5C3477 $6.95Collet, 5/8" 5C3479 $6.95Collet, 7/8" 5C3481 $6.95Collets, 5C Set of 173842 $74.95

Collets and Chucks: Brown & Sharpe Collets

$69.95● Set of seven Brown & Sharpe 7 round collets● Includes 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", and 1/2"● 3/8"-16 drawbar thread● Made of high grade tool steel● Hardened and ground to close tolerance

Collets, 7BS Set of 72999

Collet, 1/2" 7BS2998 $10.95Collet, 1/4" 7BS2994 $10.95Collet, 1/8" 7BS2992 $10.95Collet, 3/16" 7BS2993 $10.95Collet, 3/8" 7BS2996 $10.95Collet, 5/16" 7BS2995 $10.95Collet, 7/16" 7BS2997 $10.95

$139.95● Set of eleven Brown & Sharpe 9 round collets● Includes 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", and 3/4"● 1/2"-13 drawbar thread● Made of high grade tool steel● Hardened and ground to close tolerance

Collets, 9BS Set of 113011

Collet, 1/2" 9BS3006 $13.95Collet, 1/4" 9BS3002 $13.95Collet, 1/8" 9BS3000 $13.95Collet, 11/16" 9BS3009 $13.95Collet, 3/16" 9BS3001 $13.95Collet, 3/4" 9BS3010 $13.95Collet, 3/8" 9BS3004 $13.95Collet, 5/16" 9BS3003 $13.95Collet, 5/8" 9BS3008 $13.95Collet, 7/16" 9BS3005 $13.95Collet, 9/16" 9BS3007 $13.95

Collets and Chucks: ER Collets

$139.95● Includes nine ER-25 Collets● 2 Morse taper shank● 3/8"-16 drawbar thread● Includes spanner wrench and fitted case● Includes 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", and 5/8"

Collet & Chuck Set, 2MT, ER-252229

Collet Chuck, 2MT, ER-252230 $62.95


Collets and Chucks: ER Collets

$159.95● Includes eleven ER-32 collets● 3 Morse taper shank● 3/8"-16 drawbar thread● Includes spanner wrench and fitted case● Includes 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", and 3/4"

Collet & Chuck Set, 3MT, ER-322228

Collet Chuck, 3MT, ER-322231 $69.95

$169.95● Includes eleven ER-32 collets● R8 taper shank● 7/16"-20 drawbar thread● Includes spanner wrench, but no case● Includes 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", and 3/4"

Collet & Chuck Set, R8, ER-322888

Collet Chuck, R8, ER-323615 $69.95

$199.95● Mounts on mini lathe spindle● Shorter than standard 3-jaw chuck● Includes spanner wrench for tightening● Allows 3/4" stock through the headstock of the mini latheThis collet chuck for ER-32 collets mounts on the mini lathe spindle in place of the lathe chuck.ER-32 collets range in size from 3/32" up to 3/4" so you can run 3/4" stock through the headstock of your mini lathe.

Collet Chuck for ER-32 Collets2532

Collets, ER-25 Set of 152662 $129.95Collets, ER-32 Set of 112558 $119.95Collets, ER-32 Set of 182559 $164.95Collets, ER-32 Set of 62557 $64.95

$19.95● Fits ER-32 collet chucks

Nut, ER-32 Collet3407

Collets and Chucks: Morse Taper Collets

$59.95● Set of seven 2 Morse taper round collets● Includes 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", and 1/2"● 3/8"-16 drawbar thread● Made of high grade tool steel● Hardened and ground to close tolerance

Collets, 2MT Set of 71752

Collet, 1/2" 2MT1751 $10.95Collet, 1/4" 2MT1747 $10.95Collet, 1/8" 2MT1745 $10.95Collet, 3/16" 2MT1746 $10.95Collet, 3/8" 2MT1749 $10.95Collet, 5/16" 2MT1748 $10.95Collet, 7/16" 2MT1750 $10.95


Collets and Chucks: Morse Taper Collets

$99.95● Set of eleven 3 Morse taper round collets● Includes 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", and 3/4"● 3/8"-16 drawbar thread● Made of high grade tool steel● Hardened and ground to close tolerance


Collet, 1/2" 3MT1609 $13.95Collet, 1/4" 3MT1607 $13.95Collet, 1/8" 3MT1605 $13.95Collet, 11/16" 3MT1861 $13.95Collet, 3/16" 3MT1606 $13.95Collet, 3/4" 3MT1611 $13.95Collet, 3/8" 3MT1608 $13.95Collet, 5/16" 3MT1858 $13.95Collet, 5/8" 3MT1610 $13.95Collet, 7/16" 3MT1859 $13.95Collet, 9/16" 3MT1860 $13.95

$69.95● Set of seven 3 Morse taper round collets● Includes 1/8", 3/16", 1/4", 3/8", 1/2", 5/8", and 3/4"● 3/8"-16 drawbar thread● Made of high grade tool steel● Hardened and ground to close tolerance


Collets, 3MT Set of 42023 $39.95

Collets and Chucks: R8 Collets

$95.95● Set of 23 R8 round collets● Sizes from 1/16" to 3/4" by 32nds● Made of high grade tool steel● Hardened and ground to close tolerance

Collets, R8 Set of 232872

Collets, R8 Set of 112030 $46.95Collets, R8 Set of 61604 $25.95Collets, R8 Set of 72605 $29.95

Collets and Chucks: Taig Collets

$34.953MT drawbar shank with 3/8"-16 drawbar thread.3/4-16 Threaded end for Sherline and Taig chucks and tooling.Fits Taig collets and collet nut.

Arbor, Sherline/Taig Tooling 3MT1915

Arbor, Sherline/Taig Tooling 2MT2663 $34.95Collet Set, Taig2317 $30.95


Coolant Systems: Coolants & Lubricants

Coolant Systems: Coolants & Lubricants

$6.95● Safe for people● Safe for materials● Safe for the environment● Safe for machinesKool Mist 77 coolant is highly recommended for mist cooling any metal or alloy where tougher machine conditions require greater lubricity. It is particularly useful where the material is very abrasive. Improves metal cutting, milling, turning, drilling, grinding, and sawing.You can also use Kool Mist 77 as a flood coolant.Kool Mist 77 is 100% synthetic and biodegradable, and meets the requirements of OSHA & EPA. This coolant will not cause rancidity or buildup and creates no rust or corrosion when diluted with clean water. Workpieces and machine parts remain clean and unstained.Mix this concentrate with 32 parts water before use. Makes over 4 gallons of coolant.

Coolant, Kool Mist 77 Pint2236

Coolant, Kool Mist 77 Gallon2235 $36.00

$4.95● Wax-based metal-cutting compound in 6" tube● Extends tool life● Lubricate saw blades, taps, drills, and hole sawsNikx Stikx is a non-hazardous solid metal-cutting compound that eases your task ane extends the life of all metal cutting and threading tools. Cutting oils are combined with wax in a tube approximately 1" in diameter and 6" long.Rub a little compound on the tool cutting edges. The compound heats up when cutting starts. The heated compound migrates to the tool cutting edge. The cutting compound helps prevent steel and aluminum from galling on the tool cutting edges.The compound works equally well on wood working tools by preventing wood pitch build-up and is a great lubricant for driving screws and lag-bolts.Craftsmen, electricians, plumbers, maintenance engineers and machinists welcome the product because it’s convenient to use without fear of spillage.

Cutting Compound, Nikx Stikx3089

$3.95● Engineered formula for cutting and tapping● Extends tool life and controls chip welding● Improves finishes and tolerances● Safe and odorless● Spray top for easy applicationRe-Li-On Cutting and Tapping Fluid is a non-ozone depleting product that is safe on aluminum and exotic alloys such as stainless steel, hastelloy, inconel and titanium. The engineered formula clings to the cutting tool and provides strong lubrication.

Cutting Fluid, Re-Li-On 4oz3088

Cutting Fluid, Re-Li-On 16oz3120 $9.95

Coolant Systems: Flood Systems

$19.95● Great for flood coolant applications● 1/4" ID flexible coolant hoses with shut off● On/Off switchable magnetic base

Coolant Hose on Magnetic Base3952

$39.95● Great for flood coolant applications● Two 1/4" ID flexible coolant hoses with individual shut offs● On/Off switchable magnetic base

Coolant Hose on Magnetic Base3660


Coolant Systems: Flood Systems

$229.95● 3 gallons (12 liters) per minute● 3 gallons (12 liters) capacity● Tank is 11" x 10.3" x 8.5" tall● Includes magnetic base and 18" modular hoseThis coolant tank and pump is good for small mills, lathes, and band saws. Power: 120V 60Hz

Coolant Tank and Pump3814

$159.95● Includes tank, pump, hose, and nozzle● Delivers up to 100 GPH● Flow can beregulated without harming pump● Screen and chip collector easily removed for cleaning● Tank is oil resistant polyetheleneThis coolant pump and tank unit is great for bench top milling machines. It is compact (the tank holds 1 gallon) and easy to use and clean.Power: 120V 60Hz 80 watts

Flood Coolant Unit3520

Flood Coolant Package3521 $169.95

Coolant Systems: Mist Systems

$194.00● Kool Mist model 100NF12 with one spray outlet● 12" Lock-Line® spray positioner● Heavy duty magnetic base● 1 gallon stainless steel coolant tank● Adjustable coolant nozzle and 4' coolant hoseThis spray mist unit has a 1/4 NPT thread for your compressed air supply. (You furnish the air compressor.)

Mist Coolant System with Tank, 1 Outlet2965

Mist Coolant System with Tank, 2 Outlets3458 $314.00

$106.00● Kool Mist model 60M12● 12" Lock-Line® spray positioner● Heavy duty magnetic base● Adjustable coolant nozzle● 4' coolant and air hosesThis spray mist unit has a male 1/4 NPT thread for your compressed air supply. (You furnish the air compressor.)

PORTaMIST Spray Mist Unit2966

$27.95● For turning, drilling, milling, sawing, and grinding● Designed to be moved from machine to machine● Adjustable nozzle for precise aim● Adjustable spray volume● Removable strainer prevents clogsThe Spra-Kool Midget unit has successfully been used for over 30 years as a versatile, economical method of applying a coolant spray for machining.The Spra-Kool unit works on 30 to 150 PSI air pressure. (You furnish the air compressor.)Simply attach the ball-check fitting to the air supply, drop the suction tube into a coolant container, and locate the nozzle by means of the spring-wire attaching clip. The soft wire in the nose can be bent to direct the spray to the work. It is designed for easy transfer from one machine to another.The coolant container can be anything, such as a plastic bottle or a coffee can.It takes only seconds to locate and set the nozzle for full coverage of any area. Slight adjustment of the control valve permits regulating the volume from a fine mist to a heavy, wet spray. Only solid brass fittings are used. There is nothing to rust or corrode. The system is suitable for use with any type of soluble coolant or oil.

Spra-Kool Midget Mist Coolant Spray Unit2226

Coolant, Kool Mist 77 Pint2236 $6.95Spra-Kool Midget Mist Coolant Spray Unit & Coolant3804 $33.95


Cutting Tools: Boring Bars

Cutting Tools: Boring Bars

$15.95This carbide tipped 9-piece boring bar set includes three different length boring bars each for minimum bores of 5/16", 3/8", and 7/16". The bore depth ranges from 3/4" to 2-1/4".The heat treated, alloy steel shanks are held to 0.000 to -0.0005" from the nominal diameter.The holder may vary from that shown in the photo.

Boring Bar Set, Carbide 3/8" Shank1246

Boring Bar Set, Carbide 1/2" Shank1247 $17.95Boring Bar Set, Carbide 1/2" Shank with Holder for Mini Lathe3768 $27.90Boring Bar Set, Carbide 3/4" Shank3832 $39.95Boring Bar Set, HSS 1/2" Shank2682 $74.95Boring Bar Set, HSS 3/8" Shank2683 $45.95

$31.95This 3/8" diameter indexable boring bar uses CCMT inserts.The boring bar is 6" long.Minimum bore diameter is 0.50"Use CCMT 21.51 or CCMT 21.52 inserts with this boring bar.This boring bar does not come with an insert. You must purchase inserts separately.

Boring Bar, 3/8" Indexable CCMT Inserts1779

Boring Bar, 1/2" Indexable CCMT Inserts1780 $32.95Boring Bar, 5/16" Indexable CCMT Inserts3719 $30.95

$75.00● 3/8" diameter, 5" long boring bar with TPMW-1.81.5.5 insert● 2 extra TPMW-1.81.5.5 high speed steel inserts● 1 extra Torx screw ● 1 wrenchThis Warner precision boring bar uses high speed steel inserts. Combine the advantages of high speed steel cutting tools with the convenience of indexable tooling.

Boring Bar, 3/8" Indexable HSS Inserts1720

Boring Bar, 1/2" Indexable HSS Inserts1721 $80.00

$79.95● Includes boring head, R8 shank, and 9-piece boring bar set● 2" diameter boring head holds 1/2" shank boring bars● The boring head offsets up to 5/8", dial is graduated in 0.001"● Minimum bore diameter is 5/16"● Maximum bore depth is 3"The carbide tipped 9-piece boring bar set includes three different length boring bars each for minimum bores of 5/16", 7/16", and 9/16". The bore depth ranges from 3/4" to 3". The heat treated, alloy steel shanks are held to 0.000 to -0.0005" from the nominal diameter.The stand may vary from that shown in the photo.

Boring Head Set, R8 Shank3662

Boring Head Set, 3MT Shank3830 $84.95

Cutting Tools: Cut-Off Tools

1/2" x 4-1/2" M2 HSS cut-off blades. These T-shape parting blades provide great side clearance.P1N blades are 0.040 wide.P1 Blades are 1/16" (0.063") wide.P1X blades are 5/64" (0.078") wide.We carry both imported M2 blades and premium American-made M2 high speed steel cut-off blades from the A. R. Warner Co.

Cut-Off Blades, High Speed Steel

Cut-Off Blade, P11929 $7.95Cut-Off Blade, P1 A. R. Warner Co.1728 $19.95Cut-Off Blade, P1 Carbide Tipped3415 $39.95Cut-Off Blade, P1N1930 $7.95Cut-Off Blade, P1N A. R. Warner Co.1729 $19.95Cut-Off Blade, P1X1552 $7.95


Cutting Tools: Cut-Off Tools

$90.00● For external grooving and cutoff operations● Includes three 1/16 (.062”) groover T-15 high speed steel inserts● Includes two 1/32 (.031”) groover T-15 high speed steel inserts● Includes two IS 3007 screws and one T-9 wrenchThis A R Warner grooving and cut-off tool has a 0.375" shank and is 4.5" long.The maximum cutting depth of the groover inserts is approximately 0.25".

Grooving & Cutoff Tool, Indexable HSS Inserts3572

Screw, Insert Retaining3579 $1.95

Cutting Tools: Drill Sets

$399.95● Made in USA● Bronze color finish● 135º split point115 Piece cobalt steel drill set.Set includes 1/16" - 1/2" by 64ths, A - Z, and No. 1 - 60.Cobalt drills display higher red hardness and are especially effective in drilling hard or abrasive materials.These are jobbers length drills with straight shanks. Jobbers length drills are normal length drills.Includes a metal index for storing the drills.

Drill Set, 115 Piece Jobber Length Cobalt Steel3418

$124.95● Imported● Surface treated black finish● 118º point115 Piece high speed steel drill set.Set includes 1/16" - 1/2" by 64ths, A - Z, and No. 1 - 60.These are jobbers length drills with straight shanks. Jobbers length drills are normal length drills.Includes a metal index for storing the drills.

Drill Set, 115 Piece Jobber Length HSS2826

Drill Set, #1-60 Jobber Length HSS3043 $34.95Drill Set, #61-80 Jobber Length HSS3977 $16.95Drill Set, 29 Piece Jobber Length HSS2828 $44.95Drill Set, A-Z Jobber Length HSS3044 $69.95

$224.95● Made in USA● Surface treated black finish● Heavy duty 135º split point115 Piece high speed steel drill set.Set includes 1/16" - 1/2" by 64ths, A - Z, and No. 1 - 60.These are screw machine length drills with straight shanks. Screw machine length drills are 5/8 as long as normal jobber-length drills. These shorter drill bits are useful on mini lathes and mini mills where there isn't much distance for tools.Includes a Huot metal index for storing the drills.

Drill Set, 115 Piece Screw Machine Length HSS2827

Drill Set, 29 Piece Jobber Length HSS2829 $85.95Drill Set, 29 Piece Screw Machine Length HSS2830 $74.95

$54.95● Made in USA● Bright finish● 118º point19 Piece metric high speed steel drill set.Set includes 1.0 mm - 10.0 mm by 0.5 mm.These are jobbers length drills with straight shanks. Jobbers length drills are normal length drills.Includes a Huot metal index for storing the drills.

Drill Set, 19 Piece Metric Jobber Length HSS2831


Cutting Tools: Drill Sets

$119.95● 1/16" through 1/2" by 1/64" ● Revolutionary tip design stays sharper longer and drills up to 28 percent faster● Three-flatted shank design provides better chuck grip and reduces slippage● M-2 high speed steel for the best combination of strength, heat resistance, and wear resistance● Gold oxide finish. Made in USHigh speed steel drill bit set with Turbo Point tip.29-piece set in metal index case includes drill bit sizes 1/16" through 1/2" in 1/64" increments.These are jobbers length drills with three-flatted shanks on larger sizes. Jobbers length drills are normal length drills.Three-flatted shank design is ideal for use in keyless chucks.

Drill Set, 29 Piece Turbomax Tip3591

Drill Set, 21 Piece Turbomax Tip3590 $54.95

Cutting Tools: Drills

$5.49This set includes 5 different sizes of combined drills and countersinks, commonly called center drills.The set is high speed steel and includes sizes 1,2,3,4, and 5. These are 60 degree center drills.

Center Drills, Set of 5 (Numbers 1-5)1230

Center Drill, Number 12985 $0.95Center Drill, Number 22986 $0.95Center Drill, Number 32987 $1.25Center Drill, Number 42988 $1.95Center Drill, Number 52989 $2.95Center Drills, Set of 4 (Numbers 1-4)2990 $3.95

$42.95● 12 steps of 1/16" from 3/16" - 7/8"● 1/8" maximum material thickness● Single-flute cutting edge for greater control through steps● 3 flatted shank prevents slipping in drill chuck● Made in USThe Irwin Unibit is ideal for drilling holes into thin materials such as stainless steel, copper, brass, aluminum, plastic and laminates.

Step Drill Bit, 3/16" - 7/8" Irwin Unibit3604

Cutting Tools: End Mills

● High speed steel cutters● 60° dovetail angle● 3/8" shank diameter

Dovetail Cutters

Dovetail Cutter, 60° 1/2" Diameter2905 $14.95Dovetail Cutter, 60° 3/4" Diameter2906 $15.95Dovetail Cutter, 60° 3/8" Diameter2904 $13.95

$32.95● 10 piece TiN coated HSS end mill set● Includes both 2 flute and 4 flute end mills● Center cutting end mills● Includes 1/4", 3/8", 1/2" , 5/8", and 3/4" end millsThis 10 piece TiN coated HSS end mill set includes both 2 flute and 4 flute end mills.The 1/4" and 3/8" end mills have a 3/8" shank.The 1/2" end mills have a 1/2" shank.The 5/8" end mills have a 5/8" shank.The 3/4" end mills have a 3/4" shank.The set comes in a fitted case.

End Mill Set, 10 pieces 2 & 4 Flute1245


Cutting Tools: End Mills

$69.95● 20 piece TiN coated HSS end mill set● Includes both 2 flute and 4 flute end mills● Center cutting end mills● 3/16" to 3/4" by 16thsThe 3/16" through 7/16" end mills have a 3/8" shank.The 1/2" and 9/16" end mills have a 1/2" shank.The 5/8" and 11/16" end mills have a 5/8" shank.The 3/4" end mill has a 3/4" shank.The set comes in a fitted case.

End Mill Set, 20 pieces 2 & 4 Flute1244

$17.95● 6 piece HSS end mill set● 2 flute end mills● Center cutting end mills● Includes 1/8", 3/16", 1/4", 5/16", 3/8", 1/2" end mills● All end mills have 3/8" shank.The set comes in a wood stand.

End Mill Set, 6 Piece 2 Flute1242

End Mill Set, 6 Piece 2 Flute Ball2902 $45.95End Mill Set, 6 Piece 4 Flute1243 $18.95End Mill Set, 6 Piece 4 Flute Ball2903 $34.95

$39.95● 10 piece miniature HSS end mill set● Includes both 2 flute and 4 flute end mills● Double ended, center cutting end mills● Includes 1/16", 3/32", 1/8", 5/32" & 3/16” end mills● All end mills have 3/16" shankThe set comes in a wood stand.

End Mill Set, Miniature, 10 pieces 2 & 4 Flute2548

$39.95This indexable end mill has a 1.25" cutting diameter. It has an R8 shank and comes with one set of inserts.

Indexable End Mill, R81952

Indexable End Mill, 2MT1889 $39.95Indexable End Mill, 3MT1146 $62.95Screws, Insert Retaining2697 $4.75Screws, Insert Retaining1798 $4.75

Cutting Tools: Engraving Tools

$13.95● Submicron grade carbide● 1/8" shank, 1 1/2" overall length● Appropriate for 1/16" tall characters● Use for aluminum, steel, and stainless steel● Kyocera Micro Tools PN HR125SSS005AThese engraving cutters can be used on mild steel, alloyed steel, stainless steel, nickel alloys, titanium, cast iron, aluminum, copper, brass, and plastics.These cutters might cause a bur when used on plastics.

Engraving Tool, Half Round, 0.005" Line Width3776

Engraving Tool, Half Round, 0.010" Line Width3777 $13.95Engraving Tool, Half Round, 0.020" Line Width3778 $13.95

$13.95● Submicron grade carbide● 1/8" shank, 1 1/2" overall length● Recommended for use with plastics● Use for aluminum, steel, and stainless steel● Kyocera Micro Tools PN SPD1250-090These engraving cutters can be used on mild steel, alloyed steel, stainless steel, nickel alloys, titanium, cast iron, aluminum, copper, brass, and plastics.These cutters cause fewer burs on plastics.

Engraving Tool, Spade, 90 Degree Spade Angle3779


Cutting Tools: Indexable Inserts

Cutting Tools: Indexable Inserts

For information about which insert to use with each of our tools, see the insert application chart at the back of this catalog.

Inserts, Application Chart

Carbide inserts.These inserts fit our indexable tools.

Inserts, Carbide

Insert, CCMT-21.51 Carbide1781 $4.95Insert, CCMT-32.52 Carbide1795 $4.95Insert, TCMM-221 Carbide1680 $4.95Insert, TCMM-321 Carbide2381 $5.49Insert, TCMT-1.81.51 Carbide2033 $3.95Insert, TCMT-21.50 Carbide3416 $3.95Insert, TCMT-21.51 Carbide1670 $3.95Insert, TCMT-21.52 Carbide3417 $3.95Insert, TPCN1103PDR Carbide1910 $3.55Insert, TPG322 Carbide2277 $3.75Insert, VCMT-222 Carbide3471 $13.95Inserts, TPCN1603PDR Carbide1216 $3.55

High speed steel inserts.These inserts are made from T-15 high speed steel by the A. R. Warner Co.Combine the advantages of high speed steel cutting tools with the convenience of indexable tooling.

Inserts, High Speed Steel

Insert, 1/16" (0.062") Groover HSS3578 $10.00Insert, 1/32" (0.031") Groover HSS3577 $10.00Insert, 1/64" (0.015") Groover HSS3576 $10.00Insert, CCMW-2-1.5-1 High Speed Steel3696 $6.25Insert, CCMW-3-2.5-.5 High Speed Steel3573 $6.50Insert, CCMW-3-2.5-1 High Speed Steel3574 $6.50Insert, CCMW-3-2.5-2 High Speed Steel3575 $6.50Insert, CEMW-2-1.5-1 High Speed Steel3697 $6.25Insert, TCMW-21.51 High Speed Steel1724 $6.95Insert, TCMW-21.52 High Speed Steel1725 $6.95Insert, TCMW-221 High Speed Steel3700 $6.95Insert, TCMW-321 High Speed Steel3698 $6.95Insert, TNMC-32-NV High Speed Steel Threading3468 $12.95Insert, TPMB-321 High Speed Steel1623 $6.95Insert, TPMB-322 High Speed Steel1622 $6.95Insert, TPMC-32-NV High Speed Steel Threading3469 $13.95Insert, TPMW-1.81.5.5 High Speed Steel1722 $6.95Insert, TPMW-1.81.51 High Speed Steel1723 $6.95Insert, TPMW-221 High Speed Steel1624 $6.95Insert, TPMW-222 High Speed Steel1621 $6.95Insert, VCMW-222 High Speed Steel3470 $8.95

Cutting Tools: Reamers

$109.95● Includes 0.0010" over and 0.0010" under for 1/8" to 1/2" by 16ths● Straight shank and straight flute high speed steel reamers● Imported● Includes plastic pouchThis set of high speed steel chucking reamers includes 0.1240", 0.1260", 0.1865", 0.1885", 0.2490", 0.2510", 0.3115", 0.3135", 0.3740", 0.3760", 0.4365", 0.4385", 0.4990", 0.5010" reamers.

Reamers, 14 Piece Over-Under Chucking HSS3066


Cutting Tools: Reamers

$169.95● Includes 1/16" - 1/2" by 64ths● Straight shank and straight flute high speed steel reamers● Imported● Includes plastic pouch

Reamers, 29 Piece Chucking HSS3067

Cutting Tools: Rotary Broaches

$79.95● Creates square and hexagonal, blind or through holes● Broach depth to 1.5 times broach widthThe rotary broach creates square and hexagonal, blind or through holes. It can be used in a milling machine or a lathe.The broaching depth can be up to 1.5 times the dimension across the flats of the shape you want to broach. For example, you can broach a ¼" square hole up to 0.375" deep.The material to be broached should not be harder than 200 Brinell. This means you can broach aluminum, brass, bronze, soft cast iron, and mild steel. In general, you are safe with any steel where the last two digits of the AISI number are less than 30.The rotary broach tool holder is a lot like a live center. There is a bearing between the tool and the shank. But the tool is mounted at a 1 degree angle to the shank. So as the shank rotates, it "wobbles" the cutting tool. This 1 degree wobble advances each of the facet cutting edges in turn as the broach advances into the hole. The material that is removed curls into the bottom of the hole.

Rotary Broach Tool Holder 2MT3772

Rotary Broach Tool Holder R83903 $99.95Rotary Broach, 1/4" Hex3922 $34.95Rotary Broach, 1/4" Square3917 $34.95Rotary Broach, 1/8" Hex3920 $34.95Rotary Broach, 1/8" Square3915 $34.95Rotary Broach, 3 mm Hex3904 $29.95Rotary Broach, 3 mm Square3909 $29.95Rotary Broach, 3/16" Hex3921 $34.95Rotary Broach, 3/16" Square3916 $34.95Rotary Broach, 3/8" Hex3924 $34.95Rotary Broach, 3/8" Square3919 $34.95Rotary Broach, 4 mm Hex3773 $29.95Rotary Broach, 4 mm Square3910 $29.95Rotary Broach, 5 mm Hex3905 $29.95Rotary Broach, 5 mm Square3911 $29.95Rotary Broach, 5/16" Hex3923 $34.95Rotary Broach, 5/16" Square3918 $34.95Rotary Broach, 5/32" Hex3926 $34.95Rotary Broach, 6 mm Hex3906 $29.95Rotary Broach, 6 mm Square3912 $29.95Rotary Broach, 7 mm Hex3907 $29.95Rotary Broach, 7 mm Square3913 $29.95Rotary Broach, 7/32" Hex3927 $34.95Rotary Broach, 8 mm Hex3908 $29.95Rotary Broach, 8 mm Square3914 $29.95Rotary Broach, 9/64" Hex3925 $34.95


Cutting Tools: Saw Blades

Cutting Tools: Saw Blades

Starrett Powerband Matrix II band saw blade 64-1/2" x 1/2" x 0.025". The 6/P-HP blade has 6 teeth per inch, for cutting sections over 1” thick. The 8-12S blade has 8-12 teeth per inch, for cutting sections over 11/32" to 1-1/2" thick. The hook tooth shape on the 6/P-HP blade has a 10" positive rake for fast cutting of non-ferrous metals and non-metallics. The 10-14S blade has 10-14 teeth per inch, for cutting sections over 1/4” to 1-1/4” thick.The regular tooth shape on the 8-12S and 10-14S blades is the conventional tooth for general purpose sawing, straight zero rake.These blades fit the popular 4x6 band saw sold by Harbor Freight, Grizzly and many others.The variable tooth pitch reduces noise levels and vibration and cuts structurals, tubing and solids smoothly and quickly.Powerband Matrix II is the ideal general-purpose metal sawing blade.This bi-metal blade has a Matrix II high-speed steel cutting edge welded to an alloy steel back. This steel resists heat, abrasion and shock, which allows faster cutting rates over a wide range of materials.

Band Saw Blades, Starrett Powerband Matrix II

Band Saw Blade, 64-1/2” Powerband Matrix II 10-14S1876 $26.95Band Saw Blade, 64-1/2” Powerband Matrix II 6/P-HP1854 $26.95Band Saw Blade, 64-1/2” Powerband Matrix II 8-12S1855 $26.95

Starrett Premium Hard Back band saw blade 64 1/2" x 1/2" x 0.025". The 6/S blade has 6 teeth per inch, for cutting sections over 1” thick. The 10/S blade has 10 teeth per inch, for cutting sections from 3/8" to 1-1/4" thick.It has a skip tooth shape with zero rake, widely spaced teeth and shallow gullets for cutting large sections.These blades fit the popular 4x6 band saw sold by Harbor Freight, Grizzly and many others.This high carbon steel band has precisely hardened teeth, coupled with a hard, tough spring-tempered back, resulting in a high tensile strength. Greater band tension and improved blade rigidity increases cutting rates and provides more accurate cuts. Applications are light to medium vertical and horizontal machines, tool room and maintenance, low alloy, non-ferrous metals.Benefits: Economical production cutting. Increased tensile strength. More accurate and straighter cuts. Improved blade rigidity for increased cutting rates.

Band Saw Blades, Starrett Premium Hard Back

Band Saw Blade, 64-1/2" Premium Hard Back 6/S1852 $12.95Band Saw Blade, 64-1/2” Premium Hard Back 10/S1853 $12.95

$1.62Starrett Bearcat Bi-Metal BGT Hacksaw Blade with Ground Teeth.Starrett catalog number BS1214This blade is 12” long and has 14 teeth per inch. The blade is 0.025” thick.Bearcat (BGT) blades feature precision ground high-speed steel teeth coupled with a super-efficient, aggressive Bearcat tooth design. This unique combination results in faster cutting and longer blade life. Tests have shown the blades to cut as much as 30% faster than regular bi-metal blades.

Hacksaw Blade, Bi-Metal, 14 TPI, Starrett1849

Hacksaw Blade, Bi-Metal, 18 TPI, Starrett1850 $1.62Hacksaw Blade, Bi-Metal, 24 TPI, Starrett1851 $1.62Hacksaw Blade, Bi-Metal, 32 TPI, Starrett3561 $1.62

$125.95● Starrett Industrial Hole Saw Kit● Starrett catalog number KV291Eleven sizes of high-speed steel bi-metal hole saws for tool room, production and plant maintenance use. Includes two arbors complete with pilot drills, one extension and one ejector spring.Contents: 11 Hole Saws - 3/4", 7/8", 1", 1 1/4", 1 3/8", 1 1/2", 1 3/4", 2", 2 1/4", 2 1/2", 3" Accessories: A1, A2 Arbors; A5 Extension; A7 Ejector Spring Hole saw kits come complete in a sturdy carrying/storage cases.

SALE!Hole Saw Kit, Industrial, Starrett1847


Cutting Tools: Screw Extractors

Cutting Tools: Screw Extractors

$9.95● EX-1, EX-2, and EX-3 Spiral flute screw extractors● Three matching high speed steel drill bits● Removes 3/32” – 9/32”, 2.5 mm – 8 mm, No. 3 – No. 14 screwsAlways have exactly the right drill bit for your screw extractors by purchasing both together.Set includes spiral flute screw extractors in sizes: EX-1, EX-2, EX-3 and HSS drill bits in sizes: 5/64", 7/64", and 5/32" in a vinyl pouch.Designed to remove broken studs, bolts, socket screws and fittings.Aggressive left hand spiral design for extra gripping power. Spiral flutes are designed to embed themselves deeper into the metal as you turn the tool, so as the fastener resistance increases, the extractor's grip increases. Extractor size and recommended drill bit size are etched on each tool. High speed steel drill bit ensures fast, clean drilling.

Screw Extractor & Drill Bit 6-pc Set3596

Screw Extractor & Drill Bit, #1 Spiral3592 $2.49Screw Extractor & Drill Bit, #2 Spiral3598 $2.95Screw Extractor & Drill Bit, #3 Spiral3594 $3.49Screw Extractor & Drill Bit, #4 Spiral3599 $4.49

Cutting Tools: Taps & Dies

$92.95● Miniature tap set includes 0-80, 1-64, 2-56, 3-48, 4-40, and 5-40 dies● Round adjustable split dies● 13/16" diameter● High Speed Steel● ImportedFor cutting external screw threads either by hand or with a die stock or by machine with a die holder. They can be utilized to cut smaller or larger tolerance by turning the adjustment screw.

Die Set, 0-80 to 5-40 Threads2851

Die, 0-80 Thread2842 $15.95Die, 10-32 Thread3675 $15.95Die, 1-64 Thread2843 $15.95Die, 2-56 Thread2844 $15.95Die, 3-48 Thread2845 $15.95Die, 4-40 Thread2846 $15.95Die, 5-40 Thread2847 $15.95Die, 6-32 Thread2848 $15.95Die, 8-32 Thread2849 $15.95

$121.95● 39-piece machine screw & fractional tap and solid round die set● Machine screw and fractional sizes of plug style taps plus 1" solid round dies● Includes three tap handles and two die stocks● 18-leaf standard thread pitch gauge and screwdriver● Plastic case with lift-out trayThis USA-made Hansen brand 39 PC set can be used to create new threads. The Hanson 39-Piece Machine Screw / Fractional Tap and Solid Round Die Set includes machine screw taps, fractional plug style taps, plus 1-inch solid round dies. A adjustable guide diestock for cutting external threads on metal cylinders is included, as well as a adjustable handle tap wrench to create internal screw threads, and a T-handle tap wrench. There's also an 18-leaf standard thread pitch gauge, a screwdriver, and a handy plastic case to keep everything organized.39-pc set in plastic case includes the following items:Machine Screw Plug Tap and 1" Solid Round Dies in sizes: 4 - 40 NC, 6 - 32 NC, 8 - 32 NC, 10 - 24 NC, 10 - 32 NF, 12 - 24 NCFractional Plug Tap and 1" Solid Round Dies in sizes: 1/4" - 20 NC, 1/4" - 28 NF, 5/16" - 18 NC, 5/16" - 24 NF, 3/8" - 16 NC, 3/8" - 24 NF, 7/16" - 14 NC, 7/16" - 20 NF, 1/2" - 13 NC, 1/2" - 20 NFPipe Thread Plug Tap and 1" Solid Round Dies in sizes: 1/8" - 27 NPTThreading Tools: Adjustable Die Stock - 1" Dies, T-Handle Wrench - Taps No. 0 to 1/4", Adj. Handle Tap Wrench - Taps No. 0 to 1/2", 18 Leaf Standard Thread Pitch Gauge, Empty Plastic Case

Tap & Die Set, 39-Piece Solid Round Dies3601


Cutting Tools: Taps & Dies

$122.95● 41-piece machine screw & fractional hexagonal tap and die set for threading operations● Machine screw and fractional sizes of plug style taps plus 5/8" and 1" hexagon dies● Includes three tap handles and two die stocks● 18-leaf standard thread pitch gauge and screwdriver● Plastic case with lift-out trayThis USA-made Hansen brand 41 PC set can be used to restore or start new threads. The Hanson 41-Piece Machine Screw / Fractional Tap and Hex Die Set includes machine screw taps, fractional plug style taps, plus 5/8-inch and 1-inch hexagon dies in 17 different sizes. A DS-26 adjustable guide diestock and DS-57 plain diestock for cutting external threads on metal cylinders is included, as well as a TR-88 adjustable handle tap wrench to create internal screw threads, a TR-73 two-in-one tap wrench, and a TR-50 two-in-one tap wrench. There's also an 18-leaf standard thread pitch gauge, a screwdriver, and a handy plastic case to keep everything organized.41-pc set in plastic case includes the following items:Machine Screw Plug Tap and 5/8" Hexagon Dies in sizes: 4 - 40 NC, 6 - 32 NC, 8 - 32 NC, 10 - 24 NC, 10 - 32 NF, 12 - 24 NCFractional Plug Tap and 1" Hexagon Dies in sizes: 1/4" - 20 NC, 1/4" - 28 NF, 5/16" - 18 NC, 5/16" - 24 NF, 3/8" - 16 NC, 3/8" - 24 NF, 7/16" - 14 NC, 7/16" - 20 NF, 1/2" - 13 NC, 1/2" - 20 NFPipe Thread Plug Tap and 1" Hexagon Dies in sizes: 1/8" - 27 NPTThreading Tools: Adjustable Die Stock - 1" Dies, Plain Die Stock - 5/8" Hexagon Dies, Adj. Handle Tap Wrench - Taps No. 0 to 1/2", T-Handle Wrench - Taps No. 0 to 1/4", Two-in-One Tap Wrench - Taps 1/4" to 1/2", 18 Leaf Standard Thread Pitch Gauge, Empty Plastic Case

Tap & Die Set, 41-Piece3597

Tap & Die Set, 41-Piece Metric 3600 $136.95

$39.95● Tungsten Steel● Hex dies are ideal for working in tight places● Furnished in a fitted case with lift-out tray● ImportedThis 41-piece tap and die set includes all the common sizes from #4 to 1/2".The set includes a screw pitch gage, a die stock and a T-handle tap wrench.The threads covered include:NC: 4-40, 6-32, 8-32, 10-24, 12-24, 1/4”-20, 5/16”-18, 3/8”-16, 7/16”-14, 1/2”-13NF: 10-32, 1/4”-28, 5/16”-24, 3/8”-24, 7/16”-20, 1/2”-20NPT: 1/8”-27

Tap & Die Set, 41-Piece2540

Tap & Die Set, 41-Piece Metric2541 $39.95

$34.95● Miniature tap set includes 0-80, 1-64, 2-56, 3-48, 4-40, and 5-40 taps● High speed steel with ground thread● Plug tap has a 3-5 thread taper● Made in USAHand taps are the most commonly used general purpose tap. They are recommended for tapping free machining steels, stainless steels, aluminum, zinc, and ductile materials. Hand taps are utilized in either through or blind hole tapping.

Tap Set, 0-80 to 5-40 Thread2841

Tap, 0-80 Thread2832 $7.95Tap, 10-24 Thread2840 $3.49Tap, 10-32 Thread3676 $3.49Tap, 1-64 Thread2833 $7.49Tap, 2-56 Thread2834 $6.49Tap, 3-48 Thread2835 $4.95Tap, 4-40 Thread2836 $4.49Tap, 5-40 Thread2837 $4.49Tap, 6-32 Thread2838 $3.49Tap, 8-32 Thread2839 $3.49


Cutting Tools: Threading

Cutting Tools: Threading

$85.00● For internal and external threading● 1/2" shank, 3/8" IC Inserts, 5" long● 2 inserts included: TNMC-32-NV and TPMC-32-NV● 1 extra 6-32 flat head cap screw● 1 wrenchThis A R Warner precision threading tool will turn both internal and external threads. You can mount inserts on both ends. One end mounts the insert at the end of the tool for external threading. The mount on the other end is offset. Mount the insert one way for internal threading. Turn the insert around and you can use the tool for external threading too.The minimum bore diameter for internal threading is 1.375". The maximum thread depth is 0.100".

Threading Tool, 1/2" Indexable HSS Inserts3467


$81.00● For internal threading● Includes three T-15 high speed steel TPMW-221 inserts● Includes two MS-1153 screws and one T-7 wrenchThis A R Warner boring bar for single-point cutting internal threads has 0.5" shank and is 6" long.Approxiately 0.55" minimum hole size.Uses TPMW-221 and TPMW-222 inserts. The maximum thread depth is 0.100".

Threading Tool, 1/2" Insertable TPMW HSS Inserts3571

$85.00● For internal and external threading● 3/8" shank, 3/8" IC Inserts, 5" long● 2 inserts included: TNMC-32-NV and TPMC-32-NV● 1 extra 6-32 flat head cap screw● 1 wrenchThis A R Warner precision threading tool will turn both internal and external threads. You can mount inserts on both ends. One end mounts the insert at the end of the tool for external threading. The mount on the other end is offset. Mount the insert one way for internal threading. Turn the insert around and you can use the tool for external threading too.The minimum bore diameter for internal threading is 1.375". The maximum thread depth is 0.100".

Threading Tool, 3/8" Indexable HSS Inserts3695

$81.00● For internal threading● Includes three T-15 high speed steel TPMW-1.8-1.5-.5 inserts● Includes two MS-1152S screws and one T-7 wrenchThis A R Warner boring bar for single-point cutting internal threads has 0.375" shank and is 5" long.This tool requires a 0.5" minimum hole size.Uses TPMW-1.8-1.5-.5 and TPMW-1.8-1.5-1 inserts. The maximum thread depth is 0.100".

Threading Tool, 3/8" Insertable TPMW HSS Inserts3570

$9.95This threading tool bit is sharpened on both ends to a 60° angle for threading.It is made from high speed steel.Both ends are offset, one so you can thread near a left shoulder, and the other so you can thread near a right shoulder.

Tool Bit, 5/16" HSS Threading2221

Tool bit, 1/4" HSS Internal Threading1895 $12.95

Cutting Tools: Turning Tools

$85.00● 3/8" square, 6" long profiling tool● Uses HSS and carbide inserts● Includes 2 HSS inserts and one carbide insert● 1 extra Torx screw● 1 wrenchThis Warner precision profiling tool uses high speed steel or carbide inserts. Combine the advantages of high speed steel cutting tools with the convenience of indexable tooling.This profiling tool is great for CNC applications, and can be used for most of your turning needs.

Profiling Tool, 3/8" HSS & Carbide Inserts2431



$1.95● AR-5 brased carbide turning tool● Right hand tool; cuts from right to leftThese tool bit are C6 grade carbide. C6 carbide is designed for steel and steel alloys, but in hobby use works fine on aluminum and non-ferrous metals too.

Tool Bit, 5/16" Right Hand Brazed Carbide3192

Tool Bit, 5/16" Left Hand Brazed Carbide3193 $1.95

$28.95● Six presharpened 1/4" high speed steel tool bits● Includes Right hand, Left hand, 45 degree chamfer, Round nose, Boring bar, Cut off

Tool Bits, 1/4" Presharpened Set of 62250

Tool Bit, 1/4" 45 Degree Chamfer Presharpened1966 $5.50Tool Bit, 1/4" Boring Bar Presharpened1968 $5.50Tool Bit, 1/4" Cut-Off Presharpened1969 $5.50Tool Bit, 1/4" Left Hand Presharpened1964 $5.50Tool Bit, 1/4" Right Hand Presharpened1965 $5.50Tool Bit, 1/4" Round Nose Presharpened1967 $5.50

$24.95This set includes five different brazed carbide turning tools. The shanks are 5/16" which is the right size for the mini lathe.This set includes one each of the following tool bits: DIN 4971R, DIN 4975, DIN 4980R, DIN 4980L, DIN 4981R.

Tool Bits, 5/16" Brazed Carbide Set of 52412

$28.95Two presharpened 6 mm tool bits.One bit is ground for threading on one end and turning on the other end. The other bit is ground for cut-off on one end and turning on the other end.The tool bits fit our 1214 Tool holders and Tools Bits set, and can be used in other tool posts as well.

Tool Bits, 6 mm Presharpened Set of 21657

2-1/2" long HSS tool bitsWe carry both imported tool bits made of M2 high speed steel and American-made tool bits made of T-15 high speed steel from the A. R. Warner Co.

Tool Bits, High Speed Steel

Tool Bit, 1/4" M21155 $1.29Tool Bit, 1/4" T-151717 $6.75Tool Bit, 1/8" M21154 $0.95Tool Bit, 1/8" T-151726 $6.25Tool Bit, 3/16" M21153 $0.95Tool Bit, 3/16" T-151716 $6.50Tool Bit, 3/8" M21156 $2.49Tool Bit, 3/8" T-151718 $9.95Tool Bit, 5/16" M21152 $1.39Tool Bit, 5/16" T-151715 $8.75

$59.95These tool holders hold the included tool bits at the proper cutting height in the mini lathe tool post. One holds a cutting tool straight, and the other holds one at a 45º angle.The set includes the two tool holders, three tool bits, and an Allen wrench. Two of the tool bits are 6 mm square. The other is 5 mm x 8 mm.

Tool holders and Tool Bits1214



$128.00● Right and left hand turning tools with 0.250" shank 3.5" long● Boring bar with 0.375" shank 5.0" overall length● Includes three T-15 High Speed Steel CCMW-2-1.5-1 inserts for turning● Includes two T-15 High Speed Steel CEMW-2-1.5-1 inserts for boring● Includes two MS-1152S screws, four MS-1153 screws and one T-7 wrenchThis A R Warner kit includes a 1/4" right-hand turning tool, a 1/4" left-hand turning tool, and a 3/8" boring bar.The r ight hand turning bar has a 0.250” shank, and is 3.50” in overall length.The left hand turning bar has a 0.250” shank, and is 3.50” in overall length. The left hand turning bar has a second insert pocket in opposite end that provides a 50° side cutting edge angle. This provides a way to use the two insert points that are not used in the other tool holders.The boring bar has a 0.375” shank, and is 5.0” in overall length. It has 0.188" flat along length for location, and requires a 0.365" minimum bore.

Turning (1/4") and Boring (3/8") Tools, Indexable HSS Inserts3693

$130.00● Right and left hand turning tools with 0.375" shank 3.5" long● Boring bar with 0.375" shank 5.0" overall length● Includes three T-15 High Speed Steel CCMW-2-1.5-1 inserts for turning● Includes two T-15 High Speed Steel CEMW-2-1.5-1 inserts for boring● Includes two MS-1152S screws, four MS-1153 screws and one T-7 wrenchThis A R Warner kit includes a 3/8" right-hand turning tool, a 3/8" left-hand turning tool, and a 3/8" boring bar.The r ight hand turning bar has a 0.375” shank, and is 3.50” in overall length.The left hand turning bar has a 0.375” shank, and is 3.50” in overall length. The left hand turning bar has a second insert pocket in opposite end that provides a 50° side cutting edge angle. This provides a way to use the two insert points that are not used in the other tool holders.The boring bar has a 0.375” shank, and is 5.0” in overall length. It has 0.188" flat along length for location, and requires a 0.365" minimum bore.

Turning and Boring Tools, 3/8" Indexable HSS Inserts3694

$100.00● Right hand tool holder● Left hand tool holder, double ended● Includes five T-15 high speed steel CCMW-3-2.5-2 inserts● Includes four MS-1155 screws and one T-15 wrenchRight hand bar has 0.5" shank and is 4" long.Left hand bar has 0.5" shank and is 4" long. It includes a second insert pocket that provides a 50° side cutting edge.Uses CCMW-3-2.5-.5, CCMW-3-2.5-1, and CCMW-3-2.5-2 inserts.The second insert pocket on the left hand tool provides a way to use the second and fourth corners on the diamond insert.Made by A R Warner.

Turning Tools, 1/2" Indexable CCMW HSS Inserts3569


$32.95This set of indexable turning tools includes 5 tools (TAR, TAL, TBR, TBL, TE), carbide inserts, wrenches, and extra screws. It comes in a plastic case.The carbide inserts are TCMM-221 (or TT-221).

Turning Tools, 3/8" Indexable TCMM inserts1679

Turning Tools, 1/2" Indexable TCMM inserts2286 $33.95Turning Tools, 1/4" Indexable TCMM inserts1913 $33.95

$32.95This set of indexable turning tools includes 5 tools (TAR, TAL, TBR, TBL, TE), inserts, a wrench, and extra screws. It comes in a wooden case.The carbide inserts are TCMT21.51.You can also use high speed steel TCMW-21.51 or TCMW-21.52 inserts.

Turning Tools, 3/8" Indexable TCMT Inserts1669



$120.00● Style AR right hand tool ● Style BR right hand tool with a 15° lead angle ● Style E Neutral threading tool with 60° included angle ● Style BL left hand tool with a 15° lead angle ● Style AL left hand toolThese Warner precision tool holder kits use high speed steel inserts. Combine the advantages of high speed steel cutting tools with the convenience of indexable tooling.The kit contains the following:5 tool holder styles with TPMW-222 inserts 1 extra TPMW-222 high speed steel insert 1 extra Torx screw 1 wrench

Turning Tools, 3/8" Indexable TPMW HSS Inserts1619

Turning Tools, 1/2" Indexable TPMB HSS Inserts1620 $128.00Turning Tools, 1/4" Indexable TPMW HSS Inserts1719 $115.00

DROs: Displays

$13.95● These cables connect the inexpensive imported DRO scales to a display unit● 4-pin mini-DIN connector on one end● Proprietary 4-pin rectangular connector on other end● Cable length is 2 meters (78 inches)

Cable, DRO Mini-DIN 1990

Cable, DRO RJ-113483 $13.95

DROs: DRO Packages

$149.95● This DRO kit is specifically made for the 7x10, 7x12, and 7x14 mini lathe● Mounts right on the cross slide and compound rest to give you accurate depth-of-cut readings● Resolution: 0.0001", accuracy: 0.001"● Buttons for On/Off, Zero, and Inch/MM.All the parts shown in the photo are included, so this works on any 7x10, 7x12, or 7x14 lathe made by SIEG, which includes virtually all the mini lathes sold in the US and most of the mini lathes sold world-wide.

Digital Position Readout, 2-Axis Mini Lathe2222

Digital Position Readout, 2-Axis C4 Lathe3463 $199.95Digital Position Readout, 2-Axis C6 Lathe2869 $199.95

$799.00 ● Easiest to use DRO on the market. More buttons, most intuitive layout--just walk up and operate ● 5 micron (0.0002") resolution. 1 micron (0.00005") resolution with inexpensive scale upgrade ● Clearly-written full-color manual and video training DVD, 3-year warranty

● SlimLine 20 mm x 28.5 mm (0.79" x 1.12") scales; you choose the length, up to 1000 mm (39.3") ● INCLUDE SCALE SIZES IN SPECIAL INSTRUCTIONS ON YOUR ORDER

The DRO PROS 3M three-axis mill package includes everything you need: the display head; 3 glass scales up to 1000 mm (39.3") travel; detailed installation instructions; a detailed full-color operator’s manual; 3-year warranty; display mounting arm; power cord; mounting hardware; and universal mounting brackets. The package includes your choice of 19 different size scales ranging in travel from 100 mm (3.9") up to 1000 mm (39.3") in 50 mm increments. Optionally, you can choose 1 micron (0.00005") resolution scales for an additional $50.00 per scale.Operates on 120V or 240V AC.

Digital Position Readout, 3-Axis DRO Pros Mill3811

Digital Position Readout, 2-Axis DRO Pros Lathe3929 $599.00Digital Position Readout, 2-Axis DRO Pros Mill3976 $599.00DRO Pros Scale Upgrade to 1 Micron Resolution3997 $50.00


DROs: DRO Packages

$749.00● Shooting Star BT-3 3-axis digital position readout● Includes the digital display unit, 3 scales, and mounting hardware● Resolution: 0.0005", accuracy: 0.001"● The keypad is a splash-proof membrane with tactile keys in a sturdy metal enclosure● Guaranteed to fit any mill, lathe, or 3-in-1 machineShooting Star BT-3 3-axis digital position readout functions include: Inch/mm display, reversible count direction (change the direction in which the count goes up), automatic centering (find the center of a workpiece or hole by touching off two sides), two sets of coordinates (good for placing hole patterns, making slots and such), enter coordinates (you can enter the values for the current location), bolt circle and bolt line calculators (quickly create a pattern of holes), tool offsets (remember the setting for various lathe tools), and preset positions (quickly return to positions you have saved).This DRO uses a precision rack and anti-backlash pinion, with an optical encoder on the pinion.Power: 120VAC.This DRO includes one 48" scale and two 16" scales. The scales are easily shortened to suit your machine. It will fit on the mini mill with a power feed installed.

Digital Position Readout, 3-Axis Shooting Star2665

Digital Position Readout, 2-Axis Shooting Star2664 $599.00Digital Position Readout, 3-Axis Shooting Star for X3 Mill3568 $749.00

DROs: Scales

$85.00● Digital scale unit has a range of 0-12" (0-300mm)● Includes two mounting brackets● Resolution is 0.0005" (0.01mm) and the accuracy is 0.001" (0.03 mm)● Data output jack works with our digital display units● One SR 44 1.5V battery is includedThe scale cross section is 16 mm x 4 mm. The scale is 420 mm long. With the mounting brackets installed, it is 445 mm long overall.This scale is the correct length for the X- and Z--axis on the mini mill as well as the carriage motion on 7x10 and 7x12 mini lathes.

DRO Scale 12" (300 mm)2014

DRO Scale 16" (400 mm) CLOSEOUT2015 $88.00SALEDRO Scale 20" (500 mm)3091 $160.00DRO Scale 4" (100 mm)2012 $49.00DRO Scale 8" (200 mm)2013 $69.00

Kits: Conversion Kits

$39.95This does not fit our 3900 Hi-Torque mill, our mill requires different mounting brackets and hardware and we'll have a version for it soon.

Convert torsion spring mini mills to air spring.Newer mini mills use a torsion spring mounted on the side of the column to support the head. This kit provides all the parts required to change to a vertical air spring that mounts inside and above the column.With the air spring installed, you can move the mill head up until the top of the casting is almost flush with the top of the column. You can move it down until it almost contacts the adjustable Z-axis stop set in its lowest position.Besides all the parts required to mount the air spring, this kit also includes a longer Z-axis rack so you can take advantage of the longer head motion.This air spring has about 35 pounds of force. This is not enough to totally support the head, but it is a heck of a lot more support than the torsion arm provides.

Air Spring Conversion Kit2258

$149.95This kit turns your 7x10 or 7x12 lathe into a 7x14 lathe. It includes a bed casting, a lead screw, a rack, a motor mount, a chip pan, 2 chip pan braces, several fasteners, and complete instructions. The 7x14 bed is actually 6" longer than the 7x10 bed. It is 2" longer than the 7x12 bed.This is NOT a bolt-together kit. You must drill and tap 9 holes in the new bed casting to match your lathe. You need three metric taps: M3x0.5, M6x1, and M8x1.25. If you don't have metric drills, you can use letter and number drills for tap drills. (The sizes are given in the instructions.)

Bed Extension Kit 14"1928

Bed Extension Kit 12"1525 $119.95Tap & Tap Drill Kit1617 $21.95



$145.00● No more broken drive gears● Much quieter operation● Spindle speed up to 4300 RPM● Ideal for manual and CNC mini millsThis kit provides an easy-to-install alternative to the noisy and fragile factory-installed gears that drive the spindle on the mini mill.This kit is CNC-machined from the highest quality materials. Designed to run full-time, it is built to last. The kit includes one belt.Change speeds without any tools. Simply remove the guard, loosen the lever locks and move the belt from one pair of pulleys to the other. Low speed range is 0-1700 RPM. High speed range is 0-4300 RPM.The installation is bolt-on and takes about 20 minutes.This belt drive fits the following mills:

Grizzly G0516 Lathe Mill Combo Cummins 7877 Mini Mill Grizzly G8689 Mini Milling Machine Harbor Freight 44991 Central Machinery Mini Mill/Drill Hare & Forbes HM-10 Mini Mill Drill Homier 03947 Speedway Mini Mill Micro-Mark 82573 MicroLux Milling MachineThe small pulley has a 9 mm bore with a 3 mm keyway. The large pulley has a 30 mm bore with a 5 mm keyway. If your shafts don't match these values, then this belt drive will not fit your mill.

Belt Drive Conversion Kit, Mini Mill2560

V-Belt for Mini Mill Belt Drive2657 $4.95

$105.95This kit increases the Y-axis travel to 130 mm on the Harbor Freight 47158 micro mill.The conversion kit includes a new base, saddle, Y-axis screw, the pivot components, and a bunch of fasteners and small parts.

Extended Y-Axis Travel Kit, Micro Mill2297

Tilting Spindle, Y-axis travel Kit, Micro Mill2296 $169.95

$57.75These parts change HiTorque mini mills to 20 thread per inch feed screws on the X- and Y-axis. Each rotation of the hand wheel will advance the table 0.050".The kit includes two feed screws, two nuts, two 50 division dials, plus the springs and keys that you are going to lose during disassembly.

HiTorque Mini Mill 20 TPI Feed Screw Parts3954

$84.95● Table is 400 mm x 145 mm● X-Axis travel is 330 mm● Provides 150 mm more X-axis travelThis kit adds a larger table, and increases the X-axis travel to 330 mm on the Harbor Freight 47158 micro mill.The conversion kit includes a new table and 20 TPI X-axis screw.

Long Table Kit, Micro Mill2642

Long Table Kit, Micro Mill, Metric3492 $89.95

$71.60● Replaces plastic spindle gears with metal gears● Fits mini lathes and 3MT mini mills● Includes installation toolsOnce this kit is installed on your mini lathe or mini mill, you will no longer have to worry about breaking the hard-to-replace gears on the spindle.

Metal Gear Kit for Mini Lathe & Mini Mill2909



$195.95● Changes every plastic gear on the mini lathe to metal● Metal change gear set● Metal 2-speed transmission gears● Metal lead screw drive gears● Metal 80-tooth gearsThis kit changes every plastic gear on a mini lathe to steel. You will never break a plastic gear again.

Metal Gear Kit, Mini Lathe Complete3446

Change Gears Set, Metal3447 $99.95Gear, 45 Teeth Metal3493 $12.95Gear, 80 Teeth Metal3450 $19.95Pinion, 20T Metal3455 $9.95Pinion, 25T Metal3454 $9.95

$39.95● Replaces both plastic transmission gears with metal● Fits mini lathes and 3MT mini millsOnce this kit of steel gears is installed on your mini lathe or mini mill, you will no longer have to worry about breaking the hard-to-replace gears inside the headstock.On the mini lathe, the belt drive ensures that expensive parts don't break from overloads.On the mini mill, the easy-to-replace intermediate gear on top of the headstock is still plastic. This helps to ensure that you don't break expensive and hard to replace parts.

Metal Transmission Gear Kit, Mini Lathe & 3MT Mini Mill3448

Gear, 2-Speed Intermediate Shaft Metal3451 $19.95Gear, 2-Speed Spindle Metal3453 $22.95Gear, Intermediate Metal3452 $11.95Gear, Spindle (2) Metal3456 $15.95Metal Transmission Gear Kit, R8 Mini Mill3449 $39.95

$47.95Metric threading kit for 7x12 mini lathes.This kit replaces the lead screw and half nuts so you can more easily cut metric threads.

Metric Threading Kit 12"1690

Metric Threading Kit 10"1691 $47.95Metric Threading Kit 14"2026 $47.95

$54.95These parts change Grizzly, Harbor Freight, Homier, and Cummins mini lathes to 20 thread per inch feed screws on the cross slide and compound rest. Each rotation of the hand wheel will advance 0.050".

Mini Lathe 20 TPI Feed Screw Parts2383

$57.75These parts change Grizzly, Homier, Cummins, and Harbor Freight mini mills to 20 thread per inch feed screws on the X- and Y-axis. Each rotation of the hand wheel will advance the table 0.050".The kit includes two feed screws, two nuts, two 50 division dials, plus the springs and keys that you are going to lose during disassembly.This kit includes the extended screw for the mini mill power feed.

Mini Mill 20 TPI Feed Screw Parts1764

Mini Mill Metric Kit1989 $59.95

$144.95This kit upgrades the motor controller on Grizzly, Cummins, and Homier mini lathes. It also upgrades Harbor Freight mini lathes with the big red "emergency" switch.The motor controller in this kit is the standard speed control for the mini mill. It is designed for a 350 watt motor. The mini lathe has a 250 watt motor, so this provides some extra capacity.This controller has built-in overload protection and an interlock that forces you to turn the speed control to zero to start the motor.This kit includes the motor controller and installation instructions, with wiring diagrams. It is a "bolt on" upgrade for most 7x12 mini lathes. It might require some re-wiring or changing of connectors for early Homier and early Cummins mini lathes that have two circuit boards.This motor controller is model FC350BJ/110V. It is rated at 110-120V 50-60Hz.

Motor Controller Upgrade Kit1815

Motor Controller Upgrade Kit, Harbor Freight Rocker Switch1817 $164.95



$4.95● Heavy duty Cherry brand switch● Five times the rated life of the standard switch● Switch rated at 16 A at 120/250 VAC● No soldering required to installThis is an upgrade kit for the illuminated power switch on Harbor Freight mini lathes.The kit contains an upgraded switch, two crimp terminals, and a multi-stack quick disconnect. You have to un-solder the old switch, but the crimp terminals eliminate soldering during installation.

Power Switch Upgrade Kit2592

$54.95This kit converts a Grizzly or Micro-Mark mini mill to an R8 spindle. The kit includes:R8 spindleTwo spindle gearsTwo spacing ringsTwo keysOne bearingOne drawbarComplete instructions

Spindle Conversion Kit, R81625

Spindle Conversion Kit, 3MT2823 $54.95

$24.95This spring loaded spindle lock is always where you need it and guarantees that you won't start your mill with the spindle lock in place.The kit includes all the parts you need to install a permanently mounted spindle lock on your mini mill.

Spindle Lock Kit2352

$59.95This kit contains the tools you need to service the spindle on a mini lathe and mini mill. With these tools you can press the spindle and bearings out of the housing, press new bearings on the spindle, and press the spindle back into the housing.You must supply a 16" long 1/2" diameter threaded rod, two nuts, and two washers.

Spindle Repair Tools2287

$29.95This kit converts a standard mini lathe tailstock to lock by lever action. This camlock action locks the tailstock to the ways by moving a lever about 45 degrees.You must drill one 1/2" hole in the back of the tailstock casting.The cam lock kit is made from heat treated 4140 steel for long life.

Tailstock Cam Lock Kit2018

$15.95● Several small items to make your HiTorque lathe work better and last longer● Easier gib and saddle retainer adjustment● Quicker gear cover removalThe HiTorque Mini Lathe Tweaks & Enhancements Kit™ can make a big difference in the operation of your mini lathe.The kit includes the following:Hardened lathe chuck mounting nuts for long life.Self locking set screws for the cross slide and compound rest gibsSelf locking cap screws for the carriage retainersThumbscrews for the change gear cover.Complete instructions.

Tweaks & Enhancements Kit™, HiTorque Mini Lathe3940



$19.95● Several small items to make your lathe work better and last longer● Easier gib and saddle retainer adjustment● Fewer busted knuckles● Quicker gear cover removal● Fewer tailstock clamp jamsThe Mini Lathe Tweaks & Enhancements Kit™ can make a big difference in the operation of your mini lathe.The kit includes the following:Hardened lathe chuck mounting nuts for long life.Self locking set screws for the cross slide and compound rest gibsSelf locking cap screws for the carriage retainersButton-head cap screws for the cross slide and compound rest crank handles.Thumbscrews for the change gear cover.A spring for the tailstock clamp.A rubber boot to protect the F/O/R switch on 7x10 and 7x12 mini lathes.A rubber guard to prevent chips from getting into the motor speed control enclosure.Complete instructions

Tweaks & Enhancements Kit™, Mini Lathe2634

$29.95● Several small items to make your mini mill work better and last longer● Easier gib adjustment● Fewer stripped locking levers● Easier backlash adjustment● Cleaner T-slotsThe Mini Mill Tweaks & Enhancements Kit™ can make a big difference in the operation of your mini mill.The kit includes the following:Improved (German-made) locking levers for the X-, Y-, and Z-axes.Self locking set screws for the X-, Y-, and Z- axis gibs.Self locking adjustment nuts for the X-, and Y-axes.A T-slot cleanerComplete instructions

Tweaks & Enhancements Kit™, Mini Mill2635

Kits: Spare Parts Kits

$19.95● 5 GMA-2 fuses● 6 different gearsThis kit contains the parts that fail most often on the micro mill with a 2 Morse taper spindle.

Spare Parts Kit (Micro Mill)2249

$29.95This kit contains the parts that fail most often on the mini lathe.The kit contains:5 GMA-5 fuses1 Gear, 2-Speed Intermediate Shaft1 Gear, 2-Speed Spindle1 Belt, Timing1 Pulley, Timing Belt Motor1 Pulley, Timing Belt Intermediate Shaft1 Gear, 80 Tooth

Spare Parts Kit (Mini Lathe)1223

Spare Parts Kit (7x14 Mini Lathe)2262 $29.95

$29.95This kit contains the parts that fail most often on the mini mill with the R8 spindle.The kit contains:5 GMA-5 fuses1 Gear, Motor1 Gear, Intermediate1 Gear, Spindle (1)1 Gear, Spindle (2)1 Gear, 2-Speed intermediate Shaft

Spare Parts Kit (R8 Mini Mill)1703

Spare Parts Kit (3MT Mini Mill)1224 $24.95


Kits: Starter Kits

Kits: Starter Kits

$78.95● This kit contains the basics you need to start using your new micro mill● 36-piece clamping kit for 5/16" (8 mm) T-slots● Thin parallels (3" long)● 1-2-3 blocks● Edge and center finder

Starter Kit, Micro Mill2653

$22.95● This kit includes the basics you need to get started with your new mini lathe● Five 5/16" M2 high speed steel tool bits● 0-1/2" drill chuck● Drill chuck arbor 2MT short to 33JT● Four center drills, sizes 1,2,3, and 4

Starter Kit, Mini Lathe (5/16" Tool Bits)1261

Starter Kit, Lathe (3/8" Tool Bits)1796 $25.95

$79.95● This kit contains the basics you need to start using your new mini mill● Clamping kit for 7/16" (12 mm) T-slots● Thin parallels (6" long)● 1-2-3 blocks● Edge and center finder and T-slot cleaner

Starter Kit, Mini Mill1262

$229.95● Everything you need to use your 2MT M micro mill right now● Workholding - precision milling vise, parallels, clamping kit, 1-2-3 blocks● Toolholding - 2 Morse taper collet set ● Cutting tools - end mills and center drills● More - edge finder, vise mounting blocks, drawbarThe high precision toolmakers screwless vise has a one-piece body. The body and jaws are hardened to Rc 58-62. All sides are flat, square and parallel to 0.0002". There are horizontal and vertical vees on the inside face of the movable jaw to hold round objects. The vise jaws are 1.38" deep and open to 3.95" capacity. The vise is 7.63" long x 2.88" wide.The set of ten pairs of thin parallels come in a fitted case. They are 1/8" thick and 3" long. The heights are 1/2", 5/8", 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-3/8", 1-1/2", and 1-5/8". The parallels are made of high grade alloy steel hardened to 52 to 58 Rc. They are parallel within 0.0002" on the top and bottom. The pairs are matched in height within 0.0004"The 12 piece HSS end mill set includes both 2 flute and 4 flute end mills. The center cutting end mills are 1/8" to 1/2" by 16ths. All the end mills have 3/8" shanks.The set of seven 2 Morse taper round collets includes the sizes 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", and 1/2". They are made of high grade tool steel, hardened and ground to close tolerance. The drawbar thread is 3/8"-16. This set includes all the sizes required for common end mills. The precision 1-2-3 blocks are ground and case hardened on all sides to 50-60 Rc. The blocks are 1" by 2" by 3". They are parallel within 0.0002", flat within 0.0002" and square within 0.00021". The set includes two matched blocks. The blocks have 23 holes through them, 5 are threaded 3/8-16 NC. This package includes 5 different sizes of combined drills and countersinks, commonly called center drills. The center drill set is high speed steel and includes sizes 1,2,3, 4, and 5. These are 60 degree center drills.

Tooling Package, 2MT Micro Mill 3491


Kits: Starter Kits

$229.95● Everything you need to use your 2MT M micro mill right now● Workholding - precision milling vise, parallels, clamping kit, 1-2-3 blocks● Toolholding - 2 Morse taper end mill holder set● Cutting tools - end mills and center drills● More - edge finder, vise mounting blocksThe high precision toolmakers screwless vise has a one-piece body. The body and jaws are hardened to Rc 58-62. All sides are flat, square and parallel to 0.0002". There are horizontal and vertical vees on the inside face of the movable jaw to hold round objects. The vise jaws are 1.38" deep and open to 3.95" capacity. The vise is 7.63" long x 2.88" wide.The set of ten pairs of thin parallels come in a fitted case. They are 1/8" thick and 3" long. The heights are 1/2", 5/8", 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-3/8", 1-1/2", and 1-5/8". The parallels are made of high grade alloy steel hardened to 52 to 58 Rc. They are parallel within 0.0002" on the top and bottom. The pairs are matched in height within 0.0004"The 12 piece HSS end mill set includes both 2 flute and 4 flute end mills. The center cutting end mills are 1/8" to 1/2" by 16ths. All the end mills have 3/8" shanks.The set of four 2 Morse taper end mill holders includes the sizes 3/16", 3/8", 1/2", and 5/8". They are made of high grade tool steel, hardened and ground to close tolerance. The drawbar thread is 3/8"-16. This set includes all the sizes required for common end mills. The precision 1-2-3 blocks are ground and case hardened on all sides to 50-60 Rc. The blocks are 1" by 2" by 3". They are parallel within 0.0002", flat within 0.0002" and square within 0.00021". The set includes two matched blocks. The blocks have 23 holes through them, 5 are threaded 3/8-16 NC. This package includes 5 different sizes of combined drills and countersinks, commonly called center drills. The center drill set is high speed steel and includes sizes 1,2,3, 4, and 5. These are 60 degree center drills.This tooling package is perfect for KX1 CNC Mills.

Tooling Package, 3501 CNC Mill3869

$159.95● Everything you need to get started with your mini lathe● A2Z CNC Quick change tool post set● 1/2" Capacity tailstock drill chuck and center drills● Turning, boring and cut-off toolsThis package contains all the tooling you need to be productive with your 7x10, 7x12 or 7x14 mini lathe on the first day you own it.The A2Z CNC quick change tool post set (QCTP) includes the tool post, mounting hardware, two turning tool holders, a boring tool holder and a cut-off blade holder. The quick change tool post is made from 6061 T6 aluminum which is hard anodized for durability and appearance. No tools are required to change tools. Additional tool holders are available.The turning tool holders accept tools with 1/4" to 1/2" shank. The boring tool holder accepts boring bars with up to 3/8" round shanks. The cut-off tool holder holds 1/2" tall parting blades.The 1/2" capacity drill chuck is mounted on a short 2 Morse taper shank for the mini lathe. This chuck is specifically designed for the mini lathe tailstock. The rated capacity of the drill chuck is 1 mm (0.039") to 13 mm (0.512"). The set of indexable turning tools includes 5 tools (TAR, TAL, TBR, TBL, TE), inserts, a wrench, and extra screws. It comes in a plastic case. The carbide inserts are TCMM-221. The carbide tipped 9-piece boring bar set includes three different length boring bars each for minimum bores of 5/16", 3/8", and 7/16". The bore depth ranges from 3/4" to 2-1/4". The heat treated, alloy steel shanks are held to 0.000 to -0.0005" from the nominal diameter.The P1 parting blade is 1/16" x 1/2" x 4-1/2" and made from M2 HSS. These T-shape parting blades provide great side clearance. This package includes 4 different sizes of combined drills and countersinks, commonly called center drills. The center drill set is high speed steel and includes sizes 1,2,3,and 4. These are 60 degree center drills. These are the sizes that are most used by bench top machinists.

Tooling Package, Mini Lathe 3486

Tooling Package, 8x12, 8x14 Lathe3534 $159.95Tooling Package, Atlas/Craftsman 6" Lathe3514 $159.95


Kits: Starter Kits

$273.95● Everything you need to use your R8 mini mill right now● Workholding - 3" precision milling vise, parallels, clamping kit, 1-2-3 blocks● Toolholding - R8 collet set ● Cutting tools - end mills and center drills● More - edge finder, vise mounting kit, T-slot cleanerThe precision 3" Kurt-style milling machine vise has a detachable swivel base that features easy to read divisions.The top, bottom of vise bed, gib, jaws, swivel base, and all plate mounting surfaces are ground. The hardened and ground replaceable jaws on this vise are 3.15" wide, 1.04" deep, and open 3". The vise is 10.85" long. Without the base, the vise is 3.05" high. With the base, the vise is 4.21" high.Without the swivel base, the ways of the vise are parallel to the base of the vise within 0.0006" in 4". The jaws are perpendicular to the ways within 0.002" in 4". With the swivel base installed, the ways of the vise are parallel to the base of the vise within 0.0008" in 4". The replaceable jaws can be mounted on either end of the fixed and movable jaw supports providing a wide range of clamping distances. The set of ten pairs of thin parallels come in a fitted case. They are 1/8" thick and 6" long. The heights are 1/2", 5/8", 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-3/8", 1-1/2", and 1-5/8". The parallels are made of high grade alloy steel hardened to 52 to 58 Rc. They are parallel within 0.0002" on the top and bottom. The pairs are matched in height within 0.0004"The 20 piece TiN coated HSS end mill set includes both 2 flute and 4 flute end mills. The center cutting end mills are 3/16" to 3/4" by 16ths. The set comes in a fitted case. The set of seven R8 round collets includes the sizes 1/8", 3/16", 1/4", 3/8", 1/2", 5/8", 3/4". They are made of high grade tool steel, hardened and ground to close tolerance. This set includes all the sizes required for common end mills. The precision 1-2-3 blocks are ground and case hardened on all sides to 50-60 Rc. The blocks are 1" by 2" by 3". They are parallel within 0.0002", flat within 0.0002" and square within 0.00021". The set includes two matched blocks. The blocks have 23 holes through them, 5 are threaded 3/8-16 NC. This package includes 5 different sizes of combined drills and countersinks, commonly called center drills. The center drill set is high speed steel and includes sizes 1,2,3, 4, and 5. These are 60 degree center drills.

Tooling Package, R8 Mini Mill 3489

Tooling Package, 3MT Mini Mill3490 $299.95

$219.95● Everything you need to get started with your small lathe● AXA Quick change tool post set for lathes up to 12" swing● 1/2" Capacity tailstock drill chuck and center drills● Turning, boring and cut-off toolsThis package contains all the tooling you need to be productive with your lathe on the first day you own it.The AXA (Series 100) quick change tool post set (QCTP) includes the tool post, mounting hardware, a turning & facing tool holder, a boring, turning & facing tool holder, a heavy duty boring bar holder, a universal parting blade holder, and a knurling, facing & turning tool holder. The quick change tool post is made from hardened steel. No tools are required to change tools. Additional tool holders are available. It requires some level of work, tapping a hole, or making a T-slot nut, to mount this QCTP on your lathe.The turning tool holders accept tools with 3/8" to 1/2" shank. The turning and boring tool holder accepts boring bars with up to 1/2" round shanks. The cut-off tool holder holds 1/2" tall parting blades.The 1/2" capacity drill chuck is mounted on a standard 2 Morse taper shank. The rated capacity of the drill chuck is 1 mm (0.039") to 13 mm (0.512"). The set of 1/2" shank indexable turning tools includes 5 tools (TAR, TAL, TBR, TBL, TE), inserts, a wrench, and extra screws. It comes in a fitted case. The carbide inserts are TCMM-321.The carbide tipped 9-piece boring bar set includes three different length boring bars each for minimum bores of 5/16", 3/8", and 7/16". The bore depth ranges from 3/4" to 2-1/4". The heat treated, alloy steel shanks are held to 0.000 to -0.0005" from the nominal diameter.The P1 parting blade is 1/16" x 1/2" x 4-1/2" and made from M2 HSS. These T-shape parting blades provide great side clearance. This package includes 4 different sizes of combined drills and countersinks, commonly called center drills. The center drill set is high speed steel and includes sizes 1,2,3,and 4. These are 60 degree center drills. These are the sizes that are most used by bench top machinists.

Tooling Package, Small Lathe 3527

Tooling Package, 9x20 Lathe3786 $224.95


Kits: Starter Kits

$299.95● Everything you need to use your X3 mill right now● Workholding - 4" precision milling vise, parallels, clamping kit, 1-2-3 blocks● Toolholding - R8 collet set ● Cutting tools - end mills and center drills● More - edge finder, vise mounting kit, T-slot cleanerThe precision 4" Kurt-style milling machine vise has a detachable swivel base that features easy to read divisions.The top, bottom of vise bed, gib, jaws, swivel base, and all plate mounting surfaces are ground. The hardened and ground replaceable jaws on this vise are 4" wide, 1.18" deep, and open 4". The vise is 13.4" long. Without the base, the vise is 3.46" high. With the base, the vise is 4.72" high.Without the swivel base, the ways of the vise are parallel to the base of the vise within 0.0006" in 4". The jaws are perpendicular to the ways within 0.002" in 4". With the swivel base installed, the ways of the vise are parallel to the base of the vise within 0.0008" in 4". The replaceable jaws can be mounted on either end of the fixed and movable jaw supports providing a wide range of clamping distances. The set of ten pairs of thin parallels come in a fitted case. They are 1/8" thick and 6" long. The heights are 1/2", 5/8", 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-3/8", 1-1/2", and 1-5/8". The parallels are made of high grade alloy steel hardened to 52 to 58 Rc. They are parallel within 0.0002" on the top and bottom. The pairs are matched in height within 0.0004"The 20 piece TiN coated HSS end mill set includes both 2 flute and 4 flute end mills. The center cutting end mills are 3/16" to 3/4" by 16ths. The set comes in a fitted case. The set of seven R8 round collets includes the sizes 1/8", 3/16", 1/4", 3/8", 1/2", 5/8", 3/4". They are made of high grade tool steel, hardened and ground to close tolerance. This set includes all the sizes required for common end mills. The precision 1-2-3 blocks are ground and case hardened on all sides to 50-60 Rc. The blocks are 1" by 2" by 3". They are parallel within 0.0002", flat within 0.0002" and square within 0.00021". The set includes two matched blocks. The blocks have 23 holes through them, 5 are threaded 3/8-16 NC. This package includes 5 different sizes of combined drills and countersinks, commonly called center drills. The center drill set is high speed steel and includes sizes 1,2,3, 4, and 5. These are 60 degree center drills.

Tooling Package, X3 Mill3526

Lathe: 10x21 Lathe (C6) Accessories

$19.95● For SIEG C6 and Grizzly G0516 lathe● No lathe modifications required to installThe Tailstock LeverCam Lock Kit provides a cam lock for the tailstock of the SIEG C6 lathe. This lathe is sold by Grizzly Industrial as the G0516 Combo Lathe with Milling Attachment.

Tailstock LeverCam Lock Kit3430

Lathe: 4x5 Micro Lathe (C0)/Unimat Accessories

$29.95● Powers the lead screw● Clutch disengages when not in use● Includes drive belt and mounting bolt● Fits SIEG C0 lathes

Auto longitudinal feed for SIEG C0 Lathes2946

$29.95● Top slide for turning tapers● 40 mm of travel● Holds tools up to 1/4" shank● Fits Unimat 3 & 4 lathes● Fits SIEG C0 lathes

Compound Rest Assembly, Unimat 3 & 4, SIEG C0 Lathes2947

$9.95● 70 mm diameter● Three slots to mount work● M14x1.0 mounting thread● Fits Unimat 3 & 4 lathes● Fits SIEG C0 lathes

Faceplate, Unimat 3 & 4, SIEG C0 Lathes2950


Lathe: 4x5 Micro Lathe (C0)/Unimat Accessories

$17.95● 10 mm straight shank● Point is a 60º included angle● Fits Unimat 3 & 4 lathes● Fits SIEG C0 lathes

Live Center, Unimat 3 & 4, SIEG C0 Lathes2948

$19.95● Supports work up to 40 mm (1.5") in diameter● Fits Unimat 4 lathes● Fits SIEG C0 lathes

Steady Rest, Unimat 4, SIEG C0 Lathes2945

$11.95● Two sided tool post● Holds tools up to 1/4" shank● Fits Unimat 3 & 4 lathes● Fits SIEG C0 lathes● Mounts with an M6 bolt included

Tool Post, Unimat 3 & 4, SIEG C0 Lathes2952

$31.95● Wood turning tool rest and spur center● 150 mm long tool rest● Includes spur center with 10 mm shank● Fits Unimat 3 & 4 lathes● Fits SIEG C0 lathes

Wood Turning Tool Rest and Center, Unimat 3 & 4, SIEG C0 Lathes2949

Lathe: 7x10/12/14 Mini Lathe (C2/C3) Accessories

$9.951/2" Boring bar holder.This simple boring bar holder fits in the standard 4-way tool post. It holds boring bars with 1/2" shanks.

Boring Bar Holder, 1/2"1700

$35.95● Locks carriage down to ways● Won't rock the carriage when locking● Mounts to existing follower rest mounting holes● No tools required to lock the carriageThis carriage lock mounts to the two tapped holes for mounting the follower rest. The carriage lock can be left in place for most operations.

Carriage Lock, Mini Lathe2977

$24.95This carriage stop clamps to the ways of your lathe to provide a repeatable stop position. This is useful when making multiple cutting passes or when making multiple parts.This stop incorporates a fine adjustment. It is locked with a lever so you need no tools to use it.

Carriage Stop, Adjustable2705

$28.95This is the bottom half of the compound rest on the mini lathe.This part has a second set of holes that moves the center of rotation of the compound rest to help eliminate chatter.Use the holes nearest the end of the part.The thread pitch is 1 mm so the compound advances 0.040" (actually 0.0394") per revolution. Use with a dial that has 40 divisions.

Compound Rest (Bottom) Drilled1677

Compound Rest (Bottom) Drilled 20 TPI1880 $28.95



$29.95This is the bottom half of the compound rest on the mini lathe.This part has a second set of holes that moves the center of rotation of the compound rest to help eliminate chatter. This part is also about 1/4" thinner than the standard part. This makes it possible to mount AXA or Series 100 tool posts on the mini lathe. Use the holes nearest the end of the part. Do not expect to use this without a quick change tool post of some sort. It will place the standard tool post about 1/4" too low.The thread pitch is 1 mm so the compound advances 0.040" (actually 0.0394") per revolution. Use with a dial that has 40 divisions.

Compound Rest (Bottom) Drilled and Milled1777

Compound Rest (Bottom) Drilled and Milled 20 TPI1881 $29.95

$19.95This cut-off, or parting, tool holder fits in the standard 4-way tool post (and most other tool posts) and holds 1/2" tall cut-off blades.

Cut-Off Tool Holder1551

Cut-Off Tool Holder and HSS Blade3864 $39.90

$32.95● Holds 13/16" and 1" round dies● Holds dies in alignment when threading on the lathe● 2 Morse taper shank fits the mini lathe tailstock● Tommy bar provides torque for larger thread sizesThis die holder goes in the tailstock of the mini lathe, or any other lathe with a 2 Morse taper tailstock.The arbor is made of steel. The body is aluminum for low mass, so it spins easily when you release it. This prevents small parts from twisting off.

Die Holder2314

$3.49This is the 3/8-16 drawbar for the 7x10 and 7x12 mini lathe with the 3 Morse Taper spindle.This drawbar is a 3/8-16 x 5" cap screw and a flat washer. They are both hardened for long life.

Drawbar, 3MT x 3/8-16, Mini Lathe1873

Drawbar, 3MT x 3/8-16, 7x14 Mini Lathe2224 $4.29Drawbar, 3MT x 3/8-16, HiTorque Mini Lathe4001 $4.29Drawbar, 3MT x M12, Mini Lathe1872 $4.49

$19.95The faceplate is 6.25" in diameter and has 8 slots for mounting work. The faceplate is made of cast iron.

Faceplate, Mini Lathe1199

Clamping Kit for C4 Faceplate3401 $17.95Clamping Kit for Faceplate2644 $13.95Faceplate, 8x12 Lathe2544 $27.95Faceplate, C4 Lathe3400 $27.95Faceplate, G0516 Combo Lathe Mill2499 $27.95

$54.95Follower rest for the mini lathe.This follower rest has been modified with the addition of ball bearings so it will reduce marking of the workpiece.

Follower Rest, Ball Bearing2419

$26.95This follower rest mounts on the lathe saddle and moves with the carriage.

Follower Rest, Mini Lathe1198

Follower Rest, 8x12, 8x14 Lathes2859 $41.95Follower Rest, C4 Lathe3399 $35.95Follower Rest, C6 Lathes2497 $43.95



$9.95A 21 tooth change gear allows you to cut more accurate metric threads with a mini lathe.These gears are made from metal for durability.This gear fits most current production mini lathes. Measure the width of the keyway in your change gears to be sure.

Gear, 21 Teeth 3mm keyway2459

$59.95● Anodized hand wheels for apron and tailstock● Chrome levers for half-nuts, tool post and tailstock

Knob and Handwheel Kit3937

$4.95Lathe dog for the mini lathe. Use a lathe dog to drive the work when you are turning between centers.This lathe dog has a capacity of just over 3/8".

Lathe Dog1149

$184.95● Milling attachment that bolts on to the mini lathe● Set of 6 two-flute end mills, 1/8" to 1/2" diameter● 3/8" End mill holder and drawbarThe milling attachment replaces the compound rest on the mini lathe.The vise opening is 1.9". The width of the vise is 2.6" and the depth is 1.4".The travel is 3.6". The dial is graduated in 0.025 mm (approximately 0.001") and there are 60 divisions, so the advance is 1.5 mm (0.059") per revolution.

Milling Attachment Package, Mini Lathe3766

Milling Attachment, Mini Lathe1681 $159.95Milling Attachment, SIEG C6 Lathe2894 $169.95

$62.95The Taig milling attachment makes a good small milling attachment for the mini lathe. You must make a mounting block that is about 1" tall to mount this milling attachment on the cross slide.The total vertical travel is 1.5" and the dial provides 0.001" increments. The vise width is 2". The table is 2" x 3-3/4".Overall the milling attachment is 2.25" wide, 3.38" deep, and 5.75" tall.

Milling Attachment, Taig1956

$24.95● Mounts the Proxxon IB/E Professional Rotary Tool on a mini lathe● Replaces the tool postThis, and a Proxxon IB/E Professional Rotary Tool makes an internal/ external tool post grinder. Maximum diameter for grinding is about 1/2".This mount does not work with Dremel rotary tools.

Rotary Tool Mount2935

$66.95The steady rest can support work up to 1" in diameter.This steady rest has been modified with the addition of ball bearings so it will reduce marking of the workpiece.

Steady Rest, Ball Bearing2418

Finger Assembly, Ball Bearing2889 $11.95

$29.95The steady rest can support work up to 1" in diameter.

If this product is out of stock, you may want to try our part number 2418 Steady Rest, Ball Bearing as a substitute! It is the same Steady Rest just with the added ball bearing feature.

Steady Rest, Mini Lathe1197

Steady Rest, 8x12, 8x14 Lathes2858 $51.95Steady Rest, C4 Lathe3398 $53.95Steady Rest, C6 Lathes2496 $53.95



$77.95This spindle tachometer mounts on the top of the mini lathe headstock and displays the speed, to the nearest 20 RPM, of the spindle.The spindle tachometer includes the interrupter wheel and the sensor and cable.

Tachometer, Spindle1684

Interrupter Wheel, 56 mm Diameter1946 $5.95Interrupter Wheel, 66 mm Diameter2051 $5.95Sensor and Cable1945 $9.55

$14.35Four-position tool post for the mini lathe. This is the tool holder that comes on the mini lathe. On most mini lathes it is the correct size for 5/16" tools. On "early" Homier and Cummins lathes it is the correct size for 3/8" tools.The tool holder is 2" square and 1.5" tall. The tool slot is 0.64" tall and is 0.32" from the bottom.

Tool Post1204

Tool holder screws (8)1589 $1.95

$35.95The tool rest clamps in the standard tool post so you can turn wood on your mini lathe.The driving center fits in the lathe spindle.

Wood Turning Tool Rest and Center, Mini Lathe1685

Wood Turning Tool Rest and Center, C62498 $41.95

Lathe: 7x10/12/14 Mini Lathe (C2/C3) Assemblies

$72.95This is a complete compound rest for the mini lathe.It includes the tool post and locking handle not shown in the photo.

Compound Rest Assembly1769

$119.95This is the headstock assembly for a 7x10 or 7x12 mini lathe. It includes the spindle and all the pieces in the headstock casting, the High/Low shifter, all parts on the spindle, and all parts on the intermediate shaft, except the pulley.

Mini Lathe Headstock Assembly2299

$119.95● Plugs into control panel● Mounts magneticallyThis spindle tachometer mounts on the top of the mini lathe headstock and displays the speed, to the nearest 20 RPM, of the spindle.The spindle tachometer plugs into the jack on the control panel.

Tachometer, Spindle 3900 & 41003818

$71.95This is a kit of all the parts required to make a complete tailstock for the mini lathe.The center height of this tailstock is approximately 90 mm.

Tailstock Assembly1884

$79.95This is the tailstock from the HiTorque mini lathe. It has a factory-installed cam lock mechanism.

Tailstock Assembly, Cam Lock2502

$19.95This kit includes all the parts needed to add a threading dial for cutting inch threads to a mini lathe.This assembly DOES NOT help you to cut inch threads on a metric lathe with a metric lead screw.

Threading Dial Assembly (Inch)1526

Threading Dial Assembly (inch), G05162545 $28.95


Lathe: 9x20 Lathe Accessories

Lathe: 9x20 Lathe Accessories

$44.95● Precision machined from steel● Fits most 9x20 lathes● Black oxide finishEliminate the flex of your stock 2-bolt compound rest hold down with our precision machined 4-bolt upgrade. Replaces the current mount and is a direct bolt on upgrade. No mounting hardware is included.

Four Bolt Compound Hold Down for 9x20 Lathe3027

Tuff Nuts T-Slot Nuts for 9x20 (4 pieces)3108 $8.50

Lathe: Tool Post Grinders

$239.95This grinding and drilling attachment is designed for a 9x20 lathe, but can be adapted to work on the mini lathe.One end of the spindle has a grinding wheel and the other can mount a chuck for drilling.Grinding Speed: 0-7,000 RPMDrilling Speed: 0-3500 RPMMotor: 250 WattsDrilling: 1/4"Grinding wheel: 80 mm dia x 20 mm hole x 10 mm wide.The tool post grinder is approximately 12" from the front of the wheel to the back of the motor, 11" wide, and 4" thick.

Tool Post Grinder1275

Belt, Multi-V2196 $10.75Diamond Single Point Grinding Wheel Dresser3191 $14.95Grinding Wheel, 120 Grit2584 $11.95Grinding Wheel, 180 Grit2585 $11.95Grinding Wheel, 240 Grit2586 $11.95Grinding Wheel, 60 Grit2184 $11.95Grinding Wheel, 80 Grit1767 $11.95Tool Post Grinder (220VAC)2722 $239.95

$114.95This tool post grinder is designed specifically for the mini lathe. To install it, you simply replace the compound rest.The bottom of the mounting foot is approximately 50 mm (2") below the centerline of the grinding wheel.The wheel turns at 6000 RPM.The grinder comes with 2 different grit grinding wheels (60 and 80 grit), and the tools needed to change them.Motor 150 watts, 120V, 60 Hz.The tool post grinder is approximately 8" tall, 9" long and 3.5" thick.

Tool Post Grinder2001

Arbor, Grinding Wheel2195 $7.15Belt, Multi-V2194 $3.95Tool Post Grinder (220VAC)2724 $119.95


Lathe: Tooling

Lathe: Tooling

$139.95The OMW Large Radius Ball Tool like its smaller counterpart is designed to cut round shapes or curves in brass, aluminum, steel, wood or plastic on your own lathe. Balls in the ends of rods, shafts, or handles are easily turned with the tool. You can also make ball joints, governor weights, railing knobs, round contact points for tools, nose cones, and many other useful and decorative objects. The OMW Radius tool is sized for lathes of 5" or greater swing, and the ½" shank size will fit most standard tool holders. The tool will cut convex curves up to 1¾" in diameter. The tool is manufactured from the highest quality materials. Frames are machined from high strength aluminum alloy. The handle is tool steel, the pivot pins are hardened and ground and rotate in custom bronze bearings. The tool is completely machined from solid metal stock, there are no stamped, cast or pressed parts. A pre-ground High Speed steel tool bit is included. Each tool is manufactured in the USA by OMW Corporation and is carefully inspected and checked before shipment. The tool is designed so that the center height is 3/8" from the bottom of the shank. The tool comes with a pre-ground HSS tool bit which may be easily resharpened or modified.

Ball and Radius Turning Tool, Large, OMW2568

Ball and Radius Turning Tool, Small, OMW2569 $89.95Tool Bit, Large Ball and Radius Turning Tool2963 $19.95Tool Bit, Small Ball and Radius Turning Tool2964 $16.95

$47.95This attachment allows you to turn balls on the mini lathe. The tool will cut convex curves up to 2" in diameter. Includes one presharpened tool bit.You must make a mounting block for the ball turning attachment.

Ball Turning Attachment1970

$7.153 Morse taper solid dead center. This center fits the headstock of the mini lathe. The center has a 60 degree included point angle.

Dead Center, 3MT1188

Dead Center, 2MT1890 $5.95

$39.95● 0 to 2" diameter capacity● Fits standard 4-way and quick change tool posts● Includes three sets of knurlsThis scissors knurler is made to our design, specifically for the mini lathe.This knurler fits in the standard tool post of the mini lathe without any modification. It also works with any of the quick change tool posts we sell.The mounting bar is 3/8" tall so it replaces a 3/8" tool bit.It comes with fine (33 lines per inch), medium (21 lines per inch), and coarse (14 lines per inch) diamond knurls.

Knurler, Large Capacity1911

Knurler, Large Capacity with 6 sets of knurls3770 $54.95

$15.55● Point is a 60º included angle● Short 2 Morse taper for the mini lathe● Fits Jet 1014 mini wood latheThis center fits the tailstock of the mini lathe.The point is a 60º included angle.

Live Center, 2MT Short1189

$29.95This live center has a standard length 2 Morse taper arbor and will eject from most lathes with a 2MT tailstock taper.The point is a 60º included angle.

Live Center, 2MT Standard2871

Live Center, 1MT3515 $19.95


Lathe: Tooling

$69.95● For tubing and other hollow workThis bull nose live center is made from hardened steel and ground for accuracy. It has precision high quality bearings. The nose is a 70º included angle.The diameter of the nose is 2.49". The diameter of the flat on the front of the nose is 0.46".

Live Center, 2MT Standard Bull Nose3154

$23.95This center is made from hardened steel and ground for accuracy. It has precision high quality bearings. The point is a 60º included angle.The maximum diameter of the point is 0.98". The OD of the body is 1.77". The distance from the tip to the front of the body is 1.66".The rated radial load is 90 lbs. The maximum speed is 5000 RPM.

Live Center, 2MT Standard Heavy Duty1592

Live Center, 0MT Heavy Duty2714 $19.95Live Center, 1MT Heavy Duty1704 $19.95Live Center, 3MT3702 $27.95

$39.95This is a "live" drill chuck for the tailstock. Use it to support small diameter work where a live center is not practical.The shank is 2 Morse taper. The drill chuck is 1/2" capacity.

Rotating Tailstock Chuck2504

$99.95● Digital tachometer for lathes and mills● Displays RPM and Surface Feet per Minute● Range to 9999 RPM, 9999 SFM● Accuracy and Resolution to 1 RPM● Cutter or work diameter to 99.99"This kit includes the Tachulator module in an aluminum enclosure, plus the sensor and power supply. Features include:Period counting for fast updates even at slow RPM inputsCalculates SFM from RPM and entered diameterCutter or work diameter from 0.01” to 99.99”Low power consumption- 50mA typically at 9-12VDCBright attractive 4 digit 0.56” high display with decimal pointsSensor contains light source- will work in complete darknessCrystal time base for high accuracy and stabilityProfessional quality conservative design and manufacturingScrew terminal block for sensor connectionUsable with multiple sensor heads using a DPDT or 2-pole multiple-position switch

Tachulator Tachometer & SFM Meter2658

Sensor and Cable, Tachulator2825 $7.95

$69.95This tailstock turret tool holder has positions for 6 tools.The tool positions are 5/8" diameter holes with a set screw to retain the tool holder. The shank is a 2 Morse taper.

Tailstock Turret Tool Holder, 2MT1877

Tailstock Turret Tool Holder, 3MT3053 $79.95

Lathe Chucks: Accessories

$8.35This chuck key fits our 3-Jaw 3" chuck, PN 1187. This is the chuck that comes on the mini lathe.This key will also fit any other chuck that requires a 5/16" key.

Chuck Key for 3" 3-Jaw Chuck1768

Chuck Key for 4" 3-Jaw Chuck1975 $9.55Chuck Key for 4" 4-Jaw Chuck3409 $9.55


Lathe Chucks: Accessories

$28.95Inside jaws for 3" 3-jaw chuck.These are replacement jaws for the 3" 3-jaw chuck that comes on the mini lathe.Look carefully at the jaws before you decide to purchase inside or outside jaws.

Jaws, Inside for 3" 3-Jaw Chuck1688

Jaws, 4" 4-Jaw Chuck3408 $35.95Jaws, Inside for 4" 3-Jaw Chuck1973 $35.95Jaws, Outside for 3" 3-Jaw Chuck1689 $28.95Jaws, Outside for 4" 3-Jaw Chuck1974 $35.95

Lathe Chucks: Adapters

$19.95This adapter lets you mount 4" 3- or 4-jaw lathe chucks on your mini lathe.Use this adapter with chucks that have a 72 mm registration recess diameter.The adapter mounts to the 3-hole pattern on the spindle so it works on spindles with only three holes.This adapter is cast iron and has a net thickness of 0.66". The net thickness is the distance from the rim of the lathe spindle to the back of the chuck.

Adapter, 4" Lathe Chuck1692

Adapter, 4" Self-centering Lathe Chuck2426 $19.95

$28.95This adapter lets you mount 5" 3-jaw lathe chucks on your mini lathe in place of a 3" (80 mm) chuck.The adapter mounts to the 3-hole pattern on the spindle so it works on spindles with only three holes.This adapter has a 92 mm diameter registration boss, and has 3 chuck mounting holes.


Adapter, 5" Lathe Chuck2347 $28.95

$28.95This adapter mounts a 5" 3- or 4-jaw lathe chuck with a 95 mm registration recess on a flange for a 4" chuck with a 72 mm registration boss. It works on 8x12 and 8x14 lathes as well as the Harbor Freight 5980 multipurpose machine. It also fits the SIEG C4 lathe.


We stock a wide range of cast iron threaded lathe chuck adapters. These adapters are used to mount flat back lathe chucks on lathes with threaded spindles.

Lathe Chuck Adapters

Chuck Adapter, 1 1/2"-8 Thread 4" Dia1792 $18.00Chuck Adapter, 1 1/2"-8 Thread 4" Dia 3 Holes1918 $18.00Chuck Adapter, 1 1/2"-8 Thread 6" Dia1919 $30.00Chuck Adapter, 1"-10 Thread 4" Dia 3 Holes1917 $18.00Chuck Adapter, 1"-10 Thread 4" Dia.1791 $18.00Chuck Adapter, 1"-10 Thread 5" Dia.2333 $30.00Chuck Adapter, 1"-10 Thread 6" Dia.2334 $30.00Chuck Adapter, 1"-8 Thread 4" Dia 3 Holes1916 $18.00Chuck Adapter, 1"-8 Thread 4" Dia.1790 $18.00Chuck Adapter, 1"-8 Thread 5" Dia.2331 $30.00Chuck Adapter, 1"-8 Thread 6" Dia.2332 $30.00Chuck Adapter, 1/2"-20 Thread 3" Dia 3 Holes2022 $18.00Chuck Adapter, 2 1/4" - 8 Thread 6" Dia1923 $30.00Chuck Adapter, 3/4"-16 Thread 3" Dia 6 Holes1920 $20.00Chuck Adapter, M39 x 4 Thread 4" Dia1921 $18.00Chuck Adapter, M39 x 4 Thread 6" Dia1922 $30.00Chuck Adapter, Unthreaded 4" Dia.2335 $18.00Chuck Adapter, Unthreaded 6" Dia2336 $30.00


Lathe Chucks: Chucks


See the lathe chuck capacity chart at the back of this catalog.Lathe Chuck Capacities

$74.95● 3-Jaw self-centering lathe chuck.● 3" (80 mm) diameter● Includes chuck key, inside and outside jaws● Plain back mountingThis 3 inch 3-Jaw self-centering lathe chuck is the one that comes on the mini lathe. It includes a chuck key, inside and outside jaws, and mounting bolts. This chuck has a 0.63" (16 mm) through hole. It holds work up to 2.48" (63 mm) in diameter.The radial runout of a test bar held in this chuck, when the chuck is mounted true, is 0.003" maximum.

Lathe Chuck, 3-Jaw 3"1187

Lathe Chuck, 3-Jaw 2"2916 $53.95Lathe Chuck, 3-Jaw 4"1698 $79.95Lathe Chuck, 3-Jaw 5"2337 $89.95Lathe Chuck, 3-Jaw 6"2028 $109.95

$94.95● 3-jaw self centering lathe chuck● 4" (100 mm) diameter● Includes chuck key, inside and outside jaws● Includes an adapter to mount on a 3" (80 mm) flangeThis chuck comes with an adapter for the mini lathe so that you can bolt it on.This chuck has a 0.87" (22 mm) through hole. The chuck can hold work up to 3.15" (80 mm) in diameter.The radial runout of a test bar held in this chuck, when the chuck is mounted true, is 0.003" maximum.

Lathe Chuck, 3-Jaw 4" with Adapter1941

Lathe Chuck, 3-Jaw 5" with Adapter2345 $104.95

$59.95● 4-Jaw Lathe Chuck● 3" (80 mm) diameter● Each jaw is independently adjustable and reversible● Plain back mountingThis set includes the 3 inch 4-jaw chuck, a chuck key, and reversible jaws. This chuck has a 0.87" (22 mm) through hole. It holds work up to 3.15" (80 mm) in diameter.


Lathe Chuck, 4-Jaw 2"2917 $59.95Lathe Chuck, 4-Jaw 4"1588 $79.95Lathe Chuck, 4-Jaw 5"2338 $89.95Lathe Chuck, 4-Jaw 6"2038 $99.95

$119.95● 4-jaw self-centering lathe chuck● 4" (100 mm) diameter● Plain back mounting4 inch, 4-Jaw self-centering lathe chuck for square or octagonal work.The through bore of this chuck is 20 mm (0.79").The chuck can hold work up to 80 mm (3.15") in diameter.The radial runout of a test bar held in this chuck, when the chuck is mounted true, is 0.004" maximum.

Lathe Chuck, 4-Jaw 4" Self-Centering2361

Lathe Chuck, 4-Jaw 3" Self-Centering3424 $84.95



$89.95● 4-jaw lathe chuck● 4" (100 mm) diameter● Each jaw is independently adjustable and reversible● Includes an adapter to mount on a 3" (80 mm) flangeThis 4 inch 4-Jaw independent chuck includes an adapter to fit the mini lathe spindle. It includes a chuck key and reversible jaws.The adapter mounts to the spindle with three studs so additional holes in the spindle are not required.This chuck has a 0.98" (25 mm) through hole. The chuck can hold work up to 3.94" (100 mm) in diameter.

Lathe Chuck, 4-Jaw 4" with Adapter1697

Lathe Chuck, 4-Jaw 5" with Adapter2346 $99.95

$132.95● 6-jaw self centering lathe chuck● 4" (100 mm) diameter● Includes chuck key and mounting bolts● Plain back mounting● Excellent for holding thin walled workpiecesThe jaws on this 4 inch 6-Jaw self-centering lathe chuck are hardened and ground. Includes chuck key and mounting bolts.Because the chuck is designed to hold tubing, outside jaws are not included.This chuck has a 1.02" (26 mm) through hole. The chuck can hold work up to 3.15" (80 mm) in diameter.The radial runout of a test bar held in this chuck, when the chuck is mounted true, is 0.003" maximum.


Machines: Lathes

$639.95● Most powerful lathe in its class● Most low-speed torque in its class● No gears in spindle drive● Cam lock tailstockThe LittleMachineShop.com HiTorque Mini Lathe is the best in its class. It has the most power, most torque, and a longer center distance than other lathes in its class.The 500 Watt brushless spindle drive motor provides tremendous low-end torque. And you can vary the speed from 50 RPM to 2500 RPM continuously in both directions. There are no gears to shift.The cross feed and compound rest dials are graduated in 0.001" and 0.025 mm. The lathe is equipped with a 4-way indexing tool post set for 5/16" (8 mm) tools.Real top and bottom half-nuts and a reversible 16 TPI lead screw provide extended threading capability. You can create every American Standard Unified class 2A inch screw thread from 4 to 80 threads per inch, and you can create every American Standard Metric class 6h thread from 0.3 to 8 mm pitch with the extra 21 tooth change gear that is included.The lathe includes a chip tray, a backsplash guard, and spreaders to give the feet a broader stance.The LitleMachineShop.com model 4100 HiTorque Mini Lathe is a version of the SIEG SC2.

HiTorque 7x12 Mini Lathe4100

$1,249.95● Inch dials, inch threading● 120VAC 60 Hz● 1000 Watt (1.34 HP) brushless DC drive● Power longitudinal feed and power cross feedThis is a version of the SIEG SC4 bench lathe.

HiTorque 8.5x16 Lathe3536

Drip Tray, C4 Lathe3538 $49.95Stand, C4 Lathe3973 $249.00


Machines: Mills

Machines: Mills

$649.95● Most powerful mill in its class ● Most low-speed torque in its class ● No gears in spindle drive ● Largest table and X-Y travel in its class● R8 spindle The LittleMachineShop.com HiTorque Mini Mill is the best in its class. It has the most power, most torque, and a larger table than other mills in its class.The 500 Watt brushless spindle drive motor provides tremendous low-end torque. And you can vary the speed from 50 RPM to 2500 RPM continuously. There are no gears to shift. And, with no gears, the HiTorque Mini Mill is the quietest in its class.The large mill table provides 50% more table area than other mini mills. It also has 30% more travel in each direction. The resettable feed dials allow you to zero them at any point.The HiTorque Mini Mill has drill press handles for drilling and fast motion of the mill's head. It also has Z-axis fine feed with 0.001" resolution for milling operations.

HiTorque Mini Mill3900

Mill: Micro Mill (X1) Accessories

$11.95This drawbar is for the micro mill. It has a 3/8"-16 drawbar thread.

Drawbar, 2MT x 3/8-16, Micro Mill2034

$86.50● Made from cast aluminum tooling plate 1/2" thick● Plate is 5.7" x 15.75"● Holes tapped 3/8"-16 on 1.625" centers● Includes mounting bolts● Designed to fit the micro mill with the extended tableAlso has holes to fit a Sherline 3701rotary fixture and has a T-slot for a Sherline 3702 90-degree tailstock.

Tooling Plate for Micro Mills3105

Mill: Mini Mill (X2) Accessories

$9.95This drawbar fits the Grizzly G8689 and the Micro-Mark 82573 mini mills with the 3 Morse taper spindle, and is for use with collets and end mill holders with 3/8-16 NC thread.These drawbars are custom made for LittleMachineShop.com.

Drawbar, 3MT x 3/8-16, Mini Mill1637

Drawbar, 3MT x M12, Mini Mill1414 $11.95Drawbar, R8 1-Piece, Mini Mill1638 $9.95

$159.95Power table feed for the mini mill.This power feed mounts on the left end of the mini mill's table and drives the X-axis feed screw. It is variable speed (0 to 12 inches per minute).The kit takes about 20 minutes to install.This kit fits any mini mill with an extended X-axis feed screw. Look under the left side of the table to see if the X-axis feed screw has a 2 1/2" long unthreaded extension with a slot in the end. If so, you can use this power feed kit.

Mini Mill Power Feed Kit, No Feed Screw2376

Mini Mill Power Feed Kit, 16 TPI1905 $179.95Mini Mill Power Feed Kit, 20 TPI2501 $179.95Mini Mill Power Feed Kit, No Feed Screw 230V3387 $179.95

$59.95● 1" diameter arbor with spacer rings and left-hand nut● 3/4" straight shank fits in collets or end mill holders● Fits 1" ID slitting saws and milling cutters

Stub Milling Machine Arbor, 3/4" Straight Shank3620


Mill: Mini Mill (X2) Accessories

$109.95● Made from cast aluminum tooling plate 3/4" thick● Plate is 4.75" x 18"● Holes tapped 3/8"-16 on 1.625" centers● Includes mounting bolts● Designed to fit the HiTorque Mini MillCast aluminum tooling plate with 3/8-16 tapped holes and mounting bolts. Also has holes to fit a Sherline 3701 rotary fixture and has a T-slot for a Sherline 3702 90-degree tailstock.

Tooling Plate for Large Table Mini Mills4078

$86.50● Made from cast aluminum tooling plate 3/4" thick● Plate is 4" x 13"● Holes tapped 3/8"-16 on 1.625" centers● Includes mounting bolts● Designed to fit the Mini MillCast aluminum tooling plate with 3/8-16 tapped holes and mounting bolts. Also has holes to fit a Sherline 3701 rotary fixture and has a T-slot for a Sherline 3702 90-degree tailstock.

Tooling Plate for Mini Mills2708

$4.25● Laser machined from Delrin specifically for the Mini MillUse this T-slot cleaner to clear the swarf from the T-slots on your mini mill.

T-Slot Cleaner3106

$16.75● 10-32 thread● Set of 8 T-slot nuts● Fits 12 mm T-slot on Mini Mill● Steel T-nut with black oxide finish● Lifetime Warranty

Tuff Nuts T-Slot Nuts for Mini Mill (8 pieces)3107

Mill: Mini Mill (X2) Assemblies

$94.95This is the complete column assembly for the mini mill.

Mini Mill Column Assembly1766

$298.95This is the complete head assembly for the mini mill. It includes the motor, motor controls, spindle housing and spindle. In short, it includes everything that travels up and down the column.This mini mill head assembly has an R8 spindle.The motor controller is a PWM variable speed controller with overload protection and a zero-speed start interlock.Motor: 350 Watt (0.47 HP)Low speed: 0-1100 RPMHigh speed: 0-2500 RPMDrilling capacity: 1/2"End milling capacity: 5/8"Face milling capacity: 1-1/8"Power: 120V, 60 Hz

Mini Mill Head Assembly R8 Spindle1663

Mini Mill Head Assembly 3MT Spindle1912 $298.95Mini Mill Head Assembly 3MT Spindle (220VAC)2636 $298.95Mini Mill Head Assembly R8 Spindle (220VAC)2517 $298.95


Mill: Mini Mill (X2) Assemblies

$299.95● 30% more travel in both directions● 50% more table area● Unbolt the column from your existing X-Y table and bolt it to this one.● Great for the Grizzly G0516This is a complete X-Y table assembly for a mini mill.The table is 120 mm (4.73") by 460 mm (18.11"). It has three 12 mm T-slots.The X-axis travel is 300 mm (11.8") and the Y-axis travel is 130 mm (5.1"). The dials are graduated in 0.001" and one turn of the hand wheels moves the table 0.050".The X-Y table is made of cast iron and steel. There are adjustable gibs on both axes.This is all you need to make a mini mill using the milling column from a Grizzly G0516 Combo Lathe with Milling Attachment.

Mini Mill Large Table Assembly3677

$119.95This is the spindle box casting for the mini mill, along with all the internal parts. Included are:An R8 spindle with all the gears, bearings, spacers, and top nut that ride on it. The intermediate shaft with all the gears, bearings and such that ride on it. This includes the intermediate gear on the top of the shaft.The high/low speed shifting mechanism.

Mini Mill Spindle Box Assembly R81944

Mini Mill Spindle Box Assembly 3MT1906 $119.95

$199.95This is the complete X-Y table assembly for a mini mill.The table is 90 mm (3.54") by 335 mm (13.19"). It has three 12 mm T-slots.The X-axis travel is approximately 8" and the Y-axis travel is approximately 4". The table is 136 mm (5.31") tall (the hand wheel and rear mount are higher). The table is 390 mm (15.4") deep and 460 mm (18.1") wide.The dials are graduated in 0.001" and one turn of the hand wheels moves the table 0.0625".The X-Y table is made of cast iron and steel. There are adjustable gibs on both axes.This is all you need to make a mini mill using the milling column from a Grizzly G0516 Combo Lathe with Milling Attachment.

Mini Mill Table Assembly1765

Mill: Quick Change Tooling

Tool switching with the Tormach Tooling System (TTS) is extremely easy: Simply loosen the drawbar, slide out the current tool holder, then slip in the next and retighten. The unique geometry of the TTS tool holder ensures that, as the drawbar is tightened, the tool holder moves into an exact Z height while increasing rigidity.Each TTS holder has a shoulder that is undercut so it contacts the spindle itself, not the end of the collet. As the drawbar is tightened the collet will simultaneously squeeze the shank and be pulled upward into the spindle taper. This simultaneous action, grasping while moving up, pulls the tool holder tightly against the spindle face. The high-pressure contact between the shoulder of the tool holder and the spindle is the equivalent of a zero tolerance fit; the vertical location (Z-height) of the tool is exact. The initial placement, created by simply sliding the tool holder up until it stops, is normally within a few thousandths of an inch. The final location, after tightening the collet, is exact, highly repeatable, and not affected by the variable tension of the drawbar or wear on the collet.

About the Tormach Tooling System

Tool Conversion Kit, Tormach Quick Change3099 $8.95

$15.80● Quick change arbor for 1/2" drill chucks● Minimal clearance height for tool change● Repeatable tool positioning● Hardened and precision ground

Arbor, Drill Chuck, Tormach Quick Change to 33JT2436

Arbor, Drill Chuck, Tormach Quick Change to JT13586 $15.80Arbor, Drill Chuck, Tormach Quick Change to JT22453 $15.80

$37.50● Quick change boring head shank with 7/8-20 thread● Minimal clearance height for tool change● Repeatable tool positioning● Hardened and precision ground

Boring Head Shank, Tormach Quick Change2456



$92.00● Quick change adapter for ER-20 collets● Minimal clearance height for tool change● Repeatable tool positioning● Hardened and precision ground

Collet Holder, ER-20 Tormach Quick Change2435

Collet Set, ER-20 Set of 32442 $28.50Wrench Set, Tormach Quick Change2439 $13.66

$19.50● Special shortened R8 collet for TTS system● Precision groundThis precision ground R8 collet is shorter than a normal R8 collet to ensure that the TTS tool holder contacts the spindle.

Collet, 3/4" R8 for Tormach Quick Change2454

Collet, 3/4" 3MT for Tormach Quick Change2455 $20.50

$37.55● 0-1/4" Capacity drill chuck● Mounted on Tormach Tooling System Arbor● Minimal clearance height for tool change● Repeatable tool positioning● Hardened and precision ground0-1/4" Capacity drill chuck and Tormach Tooling System Arbor. All working parts are hardened. Chuck key is included. Number 1 Jacobs taper mount.

Drill Chuck, 1/4" Tormach Quick Change3588

$23.50● Quick change adapter for 3/8" shank end mills● Minimal clearance height for tool change● Repeatable tool positioning● Hardened and precision ground

End Mill Holder, 3/8" Tormach Quick Change2434

Blank Tool Holder, Tormach Quick Change2698 $16.50End Mill Holder, 1/2" Tormach Quick Change2438 $25.07End Mill Holder, 1/4" Tormach Quick Change3026 $23.50End Mill Holder, 5/16" Tormach Quick Change3025 $23.50

$745.00● Complete set for CNC operations includes 15 tool holders● Minimal clearance height for tool change● Repeatable tool positioning● All tool holders are hardened and precision ground● Tool height presetting set includedCNC operations work best with one holder for each tool in order to make use of the tool length compensation table in the CNC controller. This function also requires an off-line system for measuring the mounted tools. The CNC set includes a total of 15 tool holders plus a tool measuring set. This is an outstanding value and a great way to get started with a CNC that has been retrofitted from a manual machine. If your CNC machine supports a tool offset table but you’re not using it, then you’re not realizing the full benefit of CNC machining. Each set contains:2 each 1/4" Set Screw Tool Holders2 each 3/8" Set Screw Tool Holders4 each 1/2" Set Screw Tool Holders3 ER20 Collet Holders9 of the most popular ER20 collets4 drill chucks and JT adaptors8” Dial Height GaugeCompact Granite Surface PlatePrecision TTS-R8 colletVarious wrenches, heavy cut adaptor, and instructions

Starter Set, CNC, Tormach Quick Change2440



$239.00● Complete set for manual operations includes 4 tool holders● Minimal clearance height for tool change● Repeatable tool positioning● All tool holders are hardened and precision groundManual operations benefit from quick change, reduced clearance, and increased rigidity. Manual mill users generally don’t need to measure tool height off-line nor will they use one tool holder per tool. The set has 4 tool holders.Each set contains:1 each 1/2” Set Screw Adaptor1 each 3/8” Set Screw Adaptor1 each ER20 Collet Holder3 each ER20 Collets (1/8”, 1/4”, and 3/8”)1 each JT1 Adaptor and 1/4" Drill Chuck1 each Precision TTS-R8 colletVarious wrenches, heavy cut adaptor, and instructions

Starter Set, Manual, Tormach Quick Change2441

Mill: Sherline/Taig Mill Accessories

$18.95This boring head shank has 7/8-20 thread on the outside and 3/4-16 thread on the inside. This allows you to mount a standard boring head on a Sherline mill.The short length minimizes the tool string length to allow more working clearance.

Boring Head Shank for Sherline3121

Boring Head Shank for Taig2462 $18.95Boring Head Shank for Taig with ER-16 Spindle3122 $20.95

$22.00● Adapter for 3/8" shank end mills● 7/8" hex for easy removal from spindle● Precision CNC machined in a single setup for maximum accuracy● Made from black oxide finished steel● Perfect for CNC; allows tool length compensation.This 3/8" end mill holder screws onto the 3/4"-16 threaded spindle on Sherline mills.Made by A2Z CNC.

End Mill Holder, 3/8" Sherline2472

End Mill Holder, 1/2" Sherline2471 $22.00End Mill Holder, 1/4" Sherline2474 $22.00End Mill Holder, 1/8" Sherline2476 $22.00End Mill Holder, 3/16" Sherline2475 $22.00End Mill Holder, 5/16" Sherline2473 $22.00

$22.00● Adapter for 3/8" shank end mills● 7/8" hex for easy removal from spindle● Precision CNC machined in a single setup for maximum accuracy● Made from black oxide finished steel● Perfect for CNC; allows tool length compensation.This 3/8" end mill holder screws onto the 3/4"-16 threaded spindle on Taig mills.Made by A2Z CNC.

End Mill Holder, 3/8" Taig2466

End Mill Holder, 1/2" Taig2449 $22.00End Mill Holder, 1/4" Taig2468 $22.00End Mill Holder, 1/8" Taig2470 $22.00End Mill Holder, 3/16" Taig2469 $22.00End Mill Holder, 5/16" Taig2467 $22.00


Mill: Small Mill (X3/SX3) Accessories

Mill: Small Mill (X3/SX3) Accessories

$239.95● Power table feed for the SIEG X3 and Super X3 mills● Variable speed: 0 to 20 inches per minute● Includes adjustable limit switches● Fast traverse for high speed table motionThis power feed mounts on the left end of the mill's table and drives the X-axis feed screw. The kit takes about 30 minutes to install. It is a bolt-on accessory for the X3 and SX3 and requires no modifications to the machine. The limit switch components require modifications to work on the HitTorque Mini Mill.The SIEG X3 Small Mill is sold by Grizzly at their G0463 Mill / Drill. It is also sold by Harbor Freight as their model 93885 Precision Gear Head Two Speed/Variable Speed Milling and Drilling Machine. The SIEG Super X3 Small Mill is sold by Grizzly at their G0619 Mill / Drill.

Power Feed Kit, X32954

Power Feed Kit, X3 230V3413 $239.95

$103.50● Made from cast aluminum tooling plate 5/8" thick● Plate is 6.3" x 16"● Holes tapped 3/8"-16● Includes mounting bolts● Designed to fit the X3 MillCast aluminum tooling plate with 3/8-16 tapped holes and mounting bolts.

Tooling Plate for X3 Mills3531

Mill: Tooling

$19.95This boring head shank has an R8 taper on one end and a 7/8 - 20 thread on the other. The boring head shank adapts our boring head to mills with an R8 spindle.

Boring Head Shank R81626

Boring Head Shank 2MT1630 $19.95Boring Head Shank 3MT1265 $24.95

$49.95● 2" diameter boring head holds 1/2" shank boring bars● The boring head offsets up to 5/8"● Mounts on a shank with a 7/8 - 20 thread● Dial is graduated in 0.001"

Boring Head, 2"1266

$14.95● CENTER IT makes it easy to drill round stock and tubing● Bolts to the drill press table and enables the drilling of round pieces parallel and centered● Grooves on the outer sides eliminate slippage while holding by hand for sawing● Place CENTER IT on the drill press table, run the stationary bit down to center the fixtureCENTER IT is a tool for drilling pipe and other round objects. CENTER IT is made specifically for use in a drill press. No clamping of the tube is necessary since the angled flats of the jig hold it centered. Holes will automatically be centered on the tube with no center-punching required. If tubing is too large to drill in a single operation it can simply be turned over.Especially for the metalworking enthusiast, the woodworking hobbyist, and even the professional automotive mechanic, CENTER IT makes speedy and precise work of drilling tasks. Its "hand vise" grip ridges allow no-clamp holding of round stock for sawing and cutting.CENTER IT is made of heavy aluminum extrusion.CNETER IT is 5" Long, 4" Wide, and 1-3/4" High.

Center It V-Block2186


Mill: Tooling

$79.95The 5-piece end mill holder set includes adapters for end mills with shank diameters of 3/16, 3/8, 1/2, 5/8, and 3/4 inches. The end mill holders have an R8 shank and use the drawbar that comes with the mini mill.This end mill holder works with the mini mill with R8 spindle and other mills that have an R8 spindle.

End Mill Holder Set 5-Piece, R81258

End Mill Holder, 1/2" R81255 $15.95End Mill Holder, 3/16" R81253 $15.95End Mill Holder, 3/4" R81257 $17.95End Mill Holder, 3/8" R81254 $15.95End Mill Holder, 5/8" R81256 $17.49

$70.95The 4-Piece end mill holder set includes adapters for end mills with shank diameters of 3/16, 3/8, 1/2, and 5/8 inches. This end mill holder set works with the Harbor Freight micro mill and other mills with a 2 Morse taper spindle. The drawbar thread is 3/8-16 NC.

End Mill Holder Set, 4-Piece 2MT - 3/8-161978

End Mill Holder, 1/2" 2MT - 3/8-161706 $18.95End Mill Holder, 3/16" 2MT - 3/8-161976 $18.95End Mill Holder, 3/8" 2MT - 3/8-161705 $18.95End Mill Holder, 5/8" 2MT - 3/8-161977 $20.95

$104.95The 5-Piece end mill holder set includes adapters for end mills with shank diameters of 3/16, 3/8, 1/2, 5/8, and 3/4 inches. This end mill holder works with the mini mill with a 3 Morse taper spindle and other mills with a 3 Morse taper spindle. The drawbar thread is 3/8-16 NC.

End Mill Holder Set, 5-Piece 3MT - 3/8-161636

End Mill Holder, 1/2" 3MT - 3/8-161633 $24.95End Mill Holder, 3/16" 3MT - 3/8-161631 $24.95End Mill Holder, 3/4" 3MT - 3/8-161635 $26.95End Mill Holder, 3/8" 3MT - 3/8-161632 $24.95End Mill Holder, 5/8" 3MT - 3/8-161634 $25.95

$129.95● Table is 2.25" x 3"● Travel is 0.325"● For drilling very small holes● Finger pressure lifts table to drill● Dovetail column with adjustable brass gibCalled the Hummingbird by its manufacturer, this sensitive drilling table is perfect for drilling very small holes.The table has three clamping slots. Nuts for these slots are simply a piece of round rod with a cross hole drilled and tapped through it.

Finger Sensitive Micro Drilling Table3404

Clamping Kit, Hummingbird3405 $21.95

$12.95This is a set of three 1/2" shank fly cutters. The 3/4" body fly cutter uses a 3/16" tool bit. The 1-1/8" body fly cutter uses a 1/4" tool bit. The 1-3/8" body fly cutter uses a 5/16" tool bit.Fly cutters allow you to make fine finishes on large areas.

Fly Cutter Set1231

Fly Cutter Set with Tool Bits3094 $15.95

$49.95This indexing spin jig is used on milling machines, grinder, and inspection equipment.The spindle is hardened and ground. The spindle accuracy is 0.0004 TIR. The indexing plate is precision ground.The spin index directly indexes in 10 steps and is graduated in 5 degree increments. The vernier provides 1 degree steps.

Indexing Spin Jig, 5C1709

Collets, 5C Set of 61708 $29.95


Mill: Tooling

$27.95This is the mill table from a 3-in-1 machine. It is approximately 9.5" long, 4.25" wide and 1" thick.The mill table has 12 mm T-slots so it uses 7/16" T-slot nuts.

Mill Table1664

$99.00● Includes Nano-Tram Base and Nano-Tram Top for all bench top mills● Straddles most bench-top mill accessories● Base is precision ground flat and parallel to .0003” over entire surface● Nano-Tram Top shank is perpendicular to the face within 0.0003”● Simply lower the Nano-Tram Top to the Nano-Tram base to tram the spindleNano-Tram allows you to quickly and accurately check and align the spindle of a vertical mill perpendicular to the machine table without disturbing the work set-up. This tool works with any bench top vertical mill that will accept a 1/4" tool in the spindle.The Nano-Tram Base works on most bench top mills and straddles most bench-top mill accessories. This tool is precision ground flat and parallel to .0003” over entire surface and is made from C1020 HR steel. Inside dimensions for Nano-Tram Base are 6.44" between legs x 3.9" underneath gaging surface x 4.0" wide. Material thickness is .375".The Nano-Tram top is 3.45” in diameter with a .250” diameter shank that is .90” long. Overall height of the tool is 1.375”. Shank is perpendicular to the face within .0003”. Material is 6061-T6 aluminum, hard black anodize.

Nano-Tram Combo, 1/4" Shank3651

$10.00● Made in the USA by hungry machinistsThis tap guide helps you start threaded holes straight. The reversible point is spring loaded to maintain pressure on the tap. One end of the point has a center hole for small taps, while the other end is pointed for larger taps.The 0.500" diameter body is ground and knurled for easy handling.Remove the setscrew in the back end to reverse the point.This is a quality American-made product from Fisher Machine Shop.

Tap Guide1963

Tap Guide, 2MT Short3104 $15.50

$129.95● Tilts 40-0-40 degrees with worm drive● Graduated in degrees for quick setting● Heavy duty casting with three 1/2" T-slots● Overall height 3.75"● Locks in any position

Tilting Table, 7" x 5"3878

$1.49Use this T-slot cleaner to clear the swarf from the T-slots on your mini mill.

T-Slot Cleaner1263


Models: Flywheels

Models: Flywheels

● Cast iron and bronze flywheels● Highest quality made by Martin Model & Pattern● Cast iron flywheels are fully annealed● Castings are oversize to allow turning to the specified diameterAll Martin Model & Pattern iron castings are fully annealed for easier machining. When molten iron is poured into a sand mold, it cools very quickly where it contacts the cold sand. Quick cooling being the formula for hardening iron, this results in a very hard surface, or skin, on the casting. It's commonly known that you must address this hard skin when you start machining a casting. But Martin Model castings go through another heat treat process. After the castings have cooled, they are once again heated to a high temperature, but this time they are cooled slowly. This ensures that the castings are evenly soft throughout, and that there is no hard skin on the surface.

Flywheels from Martin Model

Flywheel, 3" Diameter 6 Heavyweight Straight Spoke2756 $16.95Flywheel, 3" Diameter 6 Heavyweight Straight Spoke Bronze2782 $23.95Flywheel, 3" Diameter 6 Straight Spokes2755 $16.95Flywheel, 3" Diameter 6 Straight Spokes Bronze2781 $23.95Flywheel, 4 1/2" Diameter 6 Curved Spokes2758 $22.95Flywheel, 4 1/2" Diameter 6 Tapered Spokes2760 $22.95Flywheel, 4" Diameter 5 Straight Spokes2757 $22.95

Models: Fully Assembled & Kits

$149.95● Working British toy loco steam engine● Includes virtually all the material and drawings you need to make this engine*● You machine the parts● CAD drawings and complete Construction ManualThis is an operating toy steam engine.This kit includes 65 pages of drawings and 60 pages of construction notes that are specific to the mini mill and mini lathe.When finished, the British toy loco measures 2.23" wide x 6.43" long x 3.72" high. If runs on 027 gage track which is 1.25" between the rails.Because of the difficulties and dangers of using steam, these engines are most often powered by compressed air.* You must purchase one piece of brass basin drain tube from your hardware store.

British Toy Loco Material Kit3137

$59.95● Working model of a steam launch boat engine● Includes all the material and drawings you need to make this model● You machine the parts● CAD drawings and complete Construction ManualThis is an operating model engine.This kit includes 15 pages of drawings and 32 pages of construction notes that are specific to the mini mill and mini lathe.When finished, the launch engine measures 2.00" wide x 2.93" long x 3.17" high.Because of the difficulties and dangers of using steam, these engines are most often powered by compressed air.

Model Steam Launch Engine Material Kit3135

$79.95● Working model of a steam mill engine● Includes all the material and drawings you need to make this model● You machine the parts● CAD drawings and complete Construction ManualThis is an operating model engine.This kit includes 35 pages of drawings and 32 pages of construction notes that are specific to the mini mill and mini lathe.When finished, the mill engine measures 2.79" wide x 4.54" long x 3.08" high.Because of the difficulties and dangers of using steam, these engines are most often powered by compressed air.

Model Steam Mill Engine Material Kit3136


Models: Fully Assembled & Kits

$189.95● Operating model of a horizontal Stirling cycle engine● Fully assembled model engine● Operating model engineModel of a horizontal Stirling cycle engine. This fully assembled model includes everything shown in the photo.The completed model is 10" long, 4 1/2" wide, and 4" tall. The base is 12 1/4" long 6 3/8" wide.

Model Stirling Horizontal Engine Fully Assembled2213

Model Stirling Horizontal Engine Assembly Kit2207 $155.95Model Stirling Horizontal Engine Material Kit2203 $82.95

$215.95● Operating model of a walking beam Stirling cycle engine● Fully assembled model engine● Operating model engineModel of a walking beam Stirling cycle engine. This fully assembled model includes everything shown in the photo.The completed model is 8 1/2" long, 3 1/2" wide, and 6 1/2" tall. The base is 12 1/4" long 6 3/8" wide.

Model Stirling Walking Beam Engine Fully Assembled2212

Model Stirling Walking Beam Engine Assembly Kit2206 $179.95Model Stirling Walking Beam Engine Material Kit2202 $83.95

$24.95● Includes all the materials you need● Plus all the hardware to assemble the engine● Complete plans are included● Great first project for beginnersThis kit includes all the materials and hardware required to make the oscillating steam engine.You will need a source of compressed air, such as an air compressor, to run this engine.

Oscillating Steam Engine Material Kit2594

Oscillating Steam Engine Material Kit and Instructional DVD3485 $44.95

Precision: Calipers

$0.95These LR44 alkaline batteries fit most electronic digital calipers.11.6 mm diameter, 5.4 mm thick.1.50 volts (nominal), 105 mAh.These batteries interchange with AG13, D357, 357, A76, LR44W, CX44, SR44.

Battery, LR44 Alkaline1707

Batteries (10), LR44 Alkaline2975 $5.95Battery, SR44 Silver Oxide2976 $2.49

$9.95● Easy Adjustment Over Entire Range● Centrally Located Adjustment Screw● Balanced Legs, Uniform Tension● Polished Natural Steel Finish

Caliper, 6" Outside Spring3617

Caliper, 6" Hermaphrodite3688 $10.95Caliper, 6" Inside Spring3618 $9.95Divider, 6" Spring3687 $9.95

$14.95This 6" Dial Caliper has clear graduations every 0.001". It is made of hardened stainless steel for long life. It has a thumb wheel and a locking screw. The measuring faces are hardened, ground and lapped. The bezel can be rotated 360°.You can make inside, outside, depth and step measurements.The dial caliper is furnished with a fitted case.

Dial Caliper, 6"1235


Precision: Calipers

$24.95● Style and quality similar to Swiss-made calipers● Clear graduations every 0.001"● Hardened stainless steel bar, rack, gears, depth rod and measuring faces● Knife-edge contacts for both inside and outside measurements● Fine adjustment roller for one hand useThis 6" Dial Caliper is made of hardened stainless steel for long life. It has a thumb wheel and a locking screw. The measuring faces are hardened, ground and lapped. The bezel can be rotated 360°.You can make inside, outside, depth and step measurements.The dial caliper is furnished with a fitted case.

Dial Caliper, 6" Professional Quality3704

$167.00● Starrett 6” white dial caliper and fitted case● Starrett catalog number 120A-6● The only American made dial caliperThis is one of the handiest measuring tools available, used by mechanics and toolmakers everywhere. It is direct reading, reliable, and accurate.

Dial Caliper, 6”, Starrett1830

$98.00● Starrett 6” white dial caliper and fitted case● Starrett catalog number 1202-6● Sharp, clear dial graduations of .001" with .100" per revolution● Sharp, black graduations on the satin finished bar, every .100"This is one of the handiest measuring tools available, used by mechanics and toolmakers everywhere. It is direct reading, reliable, and accurate.With the ability to provide quick, accurate measurement of O.D., I.D. and depth, the dial caliper is the most versatile precision hand tool on the market.Imported

Dial Caliper, 6”, Starrett3166

$17.95● 6" (150 mm) range● 0.0005" (0.01 mm) resolution● 0.001" (0.02 mm) accuracy● Reads inches or mmThis 6" electronic digital caliper has manual power on and off.There are three buttons.OFF: Turns the power off. ON/ZERO: Turns the power on and sets the readout to zero at any position. MM/INCH: Switches between inch and metric display.You can make absolute or relative inside, outside, depth, and step measurements. Furnished with a fitted case.

SALE!Electronic Digital Caliper, 6"2983

Electronic Digital Caliper, 8"3707 $39.95

$29.95● 6" (150 mm) range● 0.0005" (0.01 mm) resolution● 0.001" (0.02 mm) accuracy● Reads inches or mm● Four button model has display lockThis 6" electronic digital caliper has manual power on and off. It won't go off and lose your measurement.There are four buttons (one more than most digital calipers).OFF/ON: Turns the power on and off. ZERO: Sets the readout to zero at any position. MM/INCH: Switches between inch and metric display.HOLD: Locks the display. Use this button when you take a measurement where you cannot easily see the display. Press HOLD again to unlock the display.You can make absolute or relative inside, outside, depth, and step measurements. Furnished with a fitted case.

Electronic Digital Caliper, 6"1758

Electronic Digital Caliper, 4"1776 $29.95


Precision: Calipers

$29.95● 6", 150 mm range● 1/64", 0.0005", 0.01 mm resolution● 1/64", 0.001", 0.02 mm accuracy● Reads fractions, inches or mm. Great for woodworkers● PEC BrandThis 6" electronic digital caliper has manual power on and off.There are three buttons.OFF/ON: Turns the power on and off. ZERO: Sets the readout to zero at any position. MM/INCH/FRAC: Switches between fractional inch, decimal inch and metric display.Some fractional calipers read to 1/128". That's too fine a measure for use with wood, which expands and contracts more than that. These calipers read to 1/64", which is precise enough, without the bother of figuring out if 97/128" is larger or smaller than 3/4".Furnished with a fitted case.

Electronic Digital Caliper, 6" Fractions3124

$24.95● 6", 150 mm range● 1/64", 0.0005", 0.01 mm resolution● 1/64", 0.001", 0.02 mm accuracy● Reads fractions, inches or mm● Great for woodworkersThis 6" electronic digital caliper has manual power on and off.There are three buttons.OFF/ON: Turns the power on and off. ZERO: Sets the readout to zero at any position. MM/INCH/FRAC: Switches between fractional inch, decimal inch and metric display.Some fractional calipers read to 1/128". That's too fine a measure for use with wood, which expands and contracts more than that. These calipers read to 1/64", which is precise enough, without the bother of figuring out if 97/128" is larger or smaller than 3/4".Furnished with a fitted case.

Electronic Digital Caliper, 6" Fractions3630

Electronic Digital Caliper, 4" Fractions3612 $29.95

$64.95● 6" (150 mm) range● 0.0005" (0.01 mm) resolution● 0.001" (0.02 mm) accuracy● Reads inches or mm● IP65 level of protection against coolant, water, dirt and dustThis 6" electronic digital caliper has a rugged stainless steel case to protect the electronics.The caliper has two buttons. One turns on the power and sets the readout to zero. The second switches between inch and metric display. The caliper turns itself off after a period of inactivity. It maintains its setting when the power is off.You can make absolute or relative inside, outside, depth, and step measurements. You can set it to zero at any position.According to IEC529, in IP65 the first number "6" identifies protection against ingress of dust and the second number "5" identifies protection against water jets projected by a nozzle from any direction for a duration of 3 minutes.Furnished with a fitted case.

Electronic Digital Caliper, 6" IP65 Stainless2874

$24.95● 6" (150 mm) range● 0.0005" (0.01 mm) resolution● 0.001" (0.02 mm) accuracy● Reads inches or mm● Large display for easy readingThis 6" electronic digital caliper has manual power on and off. It won't go off and lose your measurement.There are three buttons.OFF/ON: Turns the power on and off. ZERO: Sets the readout to zero at any position. MM/INCH: Switches between inch and metric display.Furnished with a fitted case.

SALE!Electronic Digital Caliper, 6" Large Display2926


Precision: Calipers

$193.00● Large, easy-to-read LCD display● IP65 level of protection against coolant, water, dirt and dust● Hardened stainless steel measuring surface for long life● Fine adjustment for precision measurements● Resolution is .0005" (0.01 mm)Starrett 6” electronic digital caliper resists coolant, water, dirt and dust.Starrett catalog number 797B-6/150.The Starrett 797 electronic caliper provides an IP65 level of protection against foreign matter in hostile shop environments. In addition to being coolant and water resistant, the 797 also offers excellent protection against chips, dirt, dust, and other contaminants. The extra large LCD (character height .310") makes the 797 exceptionally easy to read. All 797 models also include an output port for RS232 equipped devices. While there are other IP65 electronic calipers available, only the 797 is a Starrett - for a century and a quarter, the tool of choice for the most experienced toolmakers and machinists when the measurements are most critical.According to IEC529, in IP65 the first number "6" identifies protection against ingress of dust and the second number "5" identifies protection against water jets projected by a nozzle from any direction for a duration of 3 minutes.With this caliper you can set zero at any position, read inches or millimeters, and lock the slide in position. There is a manual on/off button, plus the caliper turns itself off after four hours of inactivity.

Electronic Digital Caliper, 6", Starrett 7972530

$147.00● Large, easy-to-read LCD display can be zeroed at any position● Automatic shut-off after 5 minutes of nonuse, last measuring position retained when shut off● Hardened stainless steel body for long life● Fine adjustment thumb wheel● Resolution is .0005" (0.01mm) and linear accuracy meets DIN 862 standardStarrett 6” electronic digital caliper Starrett catalog number 799A-6/150Starrett's 799 series electronic calipers are light, comfortable, easy to use, and constructed with features that have made Starrett slide calipers the machinist's first choice for many years. They have a slim, streamlined profile, function buttons for zero and inch/mm, a large, clear, easy-to-read LCD display, and long battery life. The 799 Calipers are furnished in a fitted, protective case.Jaw Depths: 1 1/2" outside, 5/8" inside.

Electronic Digital Caliper, 6", Starrett 7992752

Precision: Edge and Center Finders

$10.50● Accurately and quickly locates center on cylindrical workpieces● Satin chrome finish● Place tool in drill chuck or collet and line up pointer with line scribed on shaft● 3/8" diameter shankDrill press center finder made in the US by Products Engineering Corporation (PEC).The drill press center finder is a quick way to find the approximate center of cylindrical objects. Line the pointer up with the mark and the drill chuck is centered over the work.

Center Finder, Drill Press PEC2747

$69.95● Use this indicator to quickly center work pieces or fixtures on your mill● The indicator remains stationary while the spindle rotates● Can be used to center internal and external diameters● The locating accuracy is 0.0002" of center● Furnished in a fitted caseUse this indicator to quickly center work pieces or fixtures on your mill.The measuring range is 0.25". The shank is 0.375" diameter and 0.75" long. The indicator is 5.5" long from the top of the shank to the bottom of the tip holder (the black part).Can measure internal diameters from 0.12" to 4.25" and external diameters from zero to 4.25".This set includes: Indicator body, restraining rod (prevents rotation), spring-loaded center point feeler, three straight feelers (for IDs), three curved feelers (for ODs).

Coaxial Centering Indicator2060



$18.00● Starrett catalog number PT28314This is a timesaving accessory for edge finders with a 3/8" shank. The collet adapter allows quick installation and removal of the edge finder, eliminating the need for collet changes on Bridgeports and similar machines. It can be used with any attachment with a 3/8" shank. The progressive steps are 1/4", 5/16", 3/8", 1/2", 5/8", 3/4" and 1". Step depths vary from .100" to .200".

Collet Adapter for Edge Finders, Starrett2652

$5.95This 3/8" diameter combination edge and center finder helps you locate work on your mill. The edge finder end has a 0.200" diameter cylinder to quickly find the edge of a work piece. The center finder end tapers to a point to locate holes.The edge and center finder is hardened and ground all over.

Edge and Center Finder1240

$12.50● Made in the USA by hungry machinistsThis 3/8" diameter combination edge and center finder helps you locate work on your mill. The edge finder end has a 0.200" diameter cylinder to quickly find the edge of a work piece. The center finder end tapers to a point to locate holes.The edge and center finder is hardened and ground all over. The edge and center finder is furnished with a quality vinyl case.This is a quality American-made product from Fisher Machine Shop.

Edge and Center Finder, Fisher1959

$124.50● 3/8" shank fits collets and end mill holders● 3.375" overall length● Uses common SR44 batteries (included)● Accuracy to 0.001"● Includes polarizing attachment to adjust dot sizeThe Laser Center/Edge Finder™ is a new tool for your mill that saves setup time. It eliminates the frustrations and doubts of using the century-old indirect method with a conventional edge finder or wiggler.The Laser Center/Edge Finder projects a fine laser beam that directly indicates the edge of the workpiece. Move the beam to the edge of the work and set your dial to zero. It is that easy. No more calculating half the diameter of the edge finder.You can also use the Laser Center/Edge Finder to locate scribed or center-punched locations. Simply move the laser beam to the location on the workpiece and the spindle is aligned.The Laser Center/Edge Finder is easy to align so you can be sure it is always accurate.The batteries last for over 3 hours of continuous operation. That's 6 months to a year of normal use.

Edge and Center Finder, Laser 3/8" Shank2604

Edge and Center Finder, Laser 1/2" Shank2606 $124.50Edge and Center Finder, Laser 1/4" Shank2543 $124.50Edge and Center Finder, Laser 10 mm Shank2624 $124.50Edge and Center Finder, Laser 6 mm Shank2623 $124.50Edge and Center Finder, Wet Cabinet Laser 1/2"2679 $134.50Magnetic Holder for Laser Edge Finder2887 $15.95Polarizing Attachment for Laser Edge Finder2886 $19.95



$152.50● 3/8" shank fits collets and end mill holders● 3.375" overall length● AC Powered 110 to 220 VAC● Accuracy to 0.001"● Includes polarizing attachment to adjust dot sizeThe Laser Center/Edge Finder™ is a new tool for your mill that saves setup time. It eliminates the frustrations and doubts of using the century-old indirect method with a conventional edge finder or wiggler.The Laser Center/Edge Finder projects a fine laser beam that directly indicates the edge of the workpiece. Move the beam to the edge of the work and set your dial to zero. It is that easy. No more calculating half the diameter of the edge finder.You can also use the Laser Center/Edge Finder to locate scribed or center-punched locations. Simply move the laser beam to the location on the workpiece and the spindle is aligned.The Laser Center/Edge Finder is easy to align so you can be sure it is always accurate.

Edge and Center Finder, Laser 3/8" Shank AC Powered3965

$157.50● 3/8" shank fits collets and end mill holders● 3.375" overall length● Uses common SR44 batteries (included)● Accuracy to 0.001"● Includes polarizing attachment to adjust line widthThe Laser Center/Edge Finder™ is a tool for your mill that saves setup time. It eliminates the frustrations and doubts of using the century-old indirect method with a conventional edge finder or wiggler.This Laser Center/Edge Finder projects a series of concentric rings, making it easy to center over an existing hole. See the pattern on the Chris' Tips tab.The Laser Center/Edge Finder projects a fine laser beam that directly indicates the edge of the workpiece. Move the beam to the edge of the work and set your dial to zero. It is that easy. No more calculating half the diameter of the edge finder.You can also use the Laser Center/Edge Finder to locate scribed or center-punched locations. Simply move the laser beam to the location on the workpiece and the spindle is aligned.The Laser Center/Edge Finder is easy to align so you can be sure it is always accurate.The batteries last for over 3 hours of continuous operation. That's 6 months to a year of normal use.

Edge and Center Finder, Laser 3/8" Shank Concentric Circles3966

$25.50Starrett double end edge and center finder. Starrett catalog number 827B.The body is 0.500” diameter. One end has a 0.200” diameter contact. The other end has a pointed contact.Work surfaces may be located easily, quickly and accurately with these edge finders. Work with flat, straight edges, shoulders, grooves, round work, studs, dowels, or center points and scribed lines - all can be accurately located with this handy tool. Body and contacts are made of tool steel, hardened, ground and lapped to close tolerances for diameter and concentricity.

Edge and Center Finder, Starrett1822

Edge and Center Finder, Metric, Starrett3793 $25.50

$11.00● Made in the USA by hungry machinistsThis 3/8" diameter edge finder helps you locate work on your mill. When you reach the edge of the work it not only jumps to the side, but it clicks too. The edge finder has a 0.200" diameter cylinder to quickly find the edge of a work piece.The edge finder is hardened and ground all over and is furnished with a quality vinyl case.This is a quality American-made product from Fisher Machine Shop.

Edge Finder 3/8" Audible, Fisher1960

Edge Finder 1/4" Audible, Fisher1961 $12.50

$24.95● Lights up when it contacts the edge of the work● Repeatable to 0.0002"● Works on any conductive metal● Includes LED light and battery● Made in USAThis electronic edge finder has a 1/2" shank. It is 4" long overall.

Edge Finder, Electronic3188



$22.00Starrett single end edge finder. Starrett catalog number 827A.The body is 0.375” diameter. The contact end is 0.200” diameter. Work surfaces may be located easily, quickly and accurately with these edge finders. Work with flat, straight edges, shoulders, grooves, round work, studs, dowels, or center points and scribed lines - all can be accurately located with this handy tool. Body and contacts are made of tool steel, hardened, ground and lapped to close tolerances for diameter and concentricity.

Edge Finder, Starrett1823

$22.95● Collet chuck and 4 probes● Includes needle point, 0.025" Ball, 0.100" Disk, and 0.250" Shank indicator attachment● Made in USAThis wiggler center finder set comes with a collet chuck and 4 probes for finding centers, edges, and indicating. Each probe snaps into the body without removing the collet nut.The wiggler shank is 0.375" diameter.

Wiggler Center Finder Set2294

Wiggler Center Finder Set1603 $9.95

$33.00Starrett Wiggler Center Finder.Starrett catalog number S828.The wiggler center finder and three different attachments adapt to countless applications and are readily interchangeable. The attachments are snapped in the chuck without removing the collet nut and are clamped by a ball swivel-joint, which permits adjustment to an angular position or true concentricity.With the pointed shank, working centers can be quickly and accurately located. Spring tension on the ball of the point permits guiding the point to true concentricity so that the work can be brought into perfect alignment with the machine spindle.The ball contact is useful in locating work by first bringing the contact (ball diameter 0.250" or 6.3 mm) against the work, a slot, hole, shoulder, or end, and indexing the work to the desired position relative to the spindle.The disc contact, which has a small disc at the end (0.100"/2.5 mm) diameter, permits use in more confined areas such as slots or shallow holes.The wiggler shank is 0.375" diameter.

Wiggler Center Finder Set, Starrett2278

$20.50Starrett Wiggler Center Finder.Starrett catalog number 828A.The wiggler center finder and pointed shank quickly and accurately locates working centers. Spring tension on the ball of the point permits guiding the point to true concentricity so that the work can be brought into perfect alignment with the machine spindle.The attachment is snapped in the chuck without removing the collet nut and is clamped by a ball swivel-joint, which permits adjustment to an angular position or true concentricity.

Wiggler Center Finder, Starrett2279

Precision: Layout

$36.95● 12" combination square set● Includes square head, center head, and protractor head● Stainless steel blade with graduations of 8ths, 16ths, 32nds, and 64thsThis 4-Piece combination square set features a stainless steel blade, and includes a square head, a center head, and a protractor.

Combination Square Set, 12"1250


Precision: Layout

$99.95● Combination square with 12" machinist's blade, square/miter head, protractor head, and center head● Easy to read satin chrome finish blade is fully hardened and tempered● 4R graduations, 8ths & 16ths, 32nds & 64ths. Protractor graduated 0-180 degrees in both directions● Heads have hammertone powder-coat finish● Square/miter head includes level vial and hardened scribe toolCombination square made in the US by Products Engineering Corporation (PEC).

Combination Square Set, PEC 12"2738

$202.00● Starrett 12" combination square set● Includes square head, center head and reversible protractor head● Starrett catalog number 435-12-4R● Graduation No. 4R- 8ths, 16ths, Quick Reading 32nds, 64thsThe combination square set has reversible lock bolts, scriber, spirit level in both square head and protractor head, direct reading double 180° protractor scale, hardened steel, machine-divided blade. Cast iron heads with black wrinkle finish.The blade is 1" wide and 3/32" thick.

Combination Square Set, Starrett 12"1838

Combination Square Set, Starrett 6"2656 $123.00

$205.00● Starrett 12" combination square set● Includes square head, center head and reversible protractor head● Starrett catalog number C435-12-4R● Graduation No. 4R- 8ths, 16ths, Quick Reading 32nds, 64thsThe combination square set has reversible lock bolts, scriber, spirit level in both square head and protractor head, direct reading double 180° protractor scale, hardened steel, machine-divided blade. Cast iron heads with black wrinkle finish.The blade is 1" wide and 3/32" thick and has a satin chrome finish.

Combination Square Set, Starrett 12"3589

$68.00● Starrett 12" combination square with square head● Starrett catalog number 11H-12-4R● Graduation No. 4R- 8ths, 16ths, Quick Reading 32nds, 64thsThe square has a reversible lock bolt, scriber, spirit level, and hardened steel, machine-divided blade with regular finish. Cast iron head with black wrinkle finish.The blade is 1" wide and 3/32" thick.

Combination Square, Starrett 12"1839

Combination Square, Starrett 4"2451 $60.00

$31.50● Double square with 6" blade● Easy to read satin chrome finish blade is fully hardened and tempered● 4R graduations, 8ths & 16ths, 32nds & 64ths● Head has hammertone powder-coat finishDouble square made in the US by Products Engineering Corporation (PEC).

Double Square, PEC 6"2741

$57.00● Starrett 4" double square with graduated blade● Starrett catalog number 13A● Popular with machinists, toolmakers, and patternmakersThe sliding blade is adjustable making it more practical for a wide variety of uses than a common square with fixed blade. The faces of the head are ground square.

Double Square, Starrett 4"3559


Precision: Layout

$70.00● Starrett 6" double square with graduated blade● Starrett catalog number 13C● Popular with machinists, toolmakers, and patternmakers● The head is approximately 3-1/2" (90 mm) long● The faces are approximately 9/16" (14 mm) wideThe sliding blades are adjustable making it more practical for a wide variety of uses than a common square with fixed blade. The faces of the head are ground square, and the 6" (150 mm) size has a level.The beveled blade and the drill grinding blade shown at the bottom of the photo are not included with this product.

Double Square, Starrett 6"2025

$12.99● Scriber with 2-3/8” Point, Starrett● Sharpie Magnum Permanent Marker, Black● Sharpie Metallic Fine Point Permanent MarkerThe big, fat Sharpie Magnum marker in this kit is a great substitute for layout dye. It marks on virtually any surface, provides an opaque covering to scribe, and doesn't dry out in the can.Not to mention that it avoids all the hassle and limitations of shipping and using hazardous layout dyes.The Starrett scriber has been the industry standard for many years.The Sharpie Metallic marker can be used on dark materials where contrast is needed. It is also great for identifying materials in your steel rack.

Layout & Marking Kit3810

$36.95● Includes 2", 3", 4" and 6" squares● Made from fully seasoned and hardened tool steel● Accurate right angles both inside and outside● Beams are ground and lapped● Class H accuracy: 0.0008" + 0.0001" per inch

Machinist Square Set2549

$44.95● Includes 2", 3", 4" and 6" squares● Made from high quality tool steel● True right angles inside and outside● Beams and blades are precision ground● Blade is hardenedMachinist squares made in the US by Products Engineering Corporation (PEC).Length of blade is measured from inner edge of beam to end of blade.These squares are square within 0.0006" over the length of the blade. The two sides of the blades and beams are parallel within 0.0005" over their length.

Machinist Square Set, PEC2742

$74.95● Accuracy to 0.002"● A center dot and circle target the punch location● Magnifies without distortion or parallax● Includes sturdy storage caseEven less experienced machinists can punch layout points to within 0.002" using this high power piloted center punch system. The optical center punch is located over a scribed workpiece and adjusted until centered using the optics. The optical pilot is then removed and replaced by the bunch. A tap marks the spot.

Optical Center Punch3186


Precision: Layout

$186.00● Starrett machinist's improved level● Starrett catalog number 98-12● Ground and graduated main vials● Cross test vial and plumb vial● 0.005" per foot (0.42 mm per meter) accuracyThese levels have ground and graduated main vials, and a cross test vial. The 12" level also has a plumb vial. These vials are adjustable to a positive setting and are housed in a satin chrome brass tube with a friction-fit closing cover to prevent breakage.The base of the levels features an involute groove running the length of the base, which provides a reliable seat for round work such as pipes or shafting. With the cross test vial, it is possible to simultaneously level in both directions. This prevents inaccuracies in the main vial reading caused by canting the level sidewise on round work.The main level vials have graduations that are approximately 80-90 seconds or .005" per foot (0.42 mm per meter). There are five, six, or seven lines on each side of the bubble, depending on the base length.These are the finest levels available, used for precision work that is typically required in industry. They all have these features:All level bases are made from the finest quality seasoned cast iron and are precision-machined on the reference surface. Nonmachined surfaces have an attractive, black wrinkle finish. An involute longitudinal groove between the bearing flats for accurate seating on round work. This groove has a special involute design, permitting better centering and greater capacity to handle larger rounds. Groove and bearing flats are machined together for maximum accuracy.

Precision Machinist's Level, 12", Starrett2423

Case for Precision Machinist's Level, 12" Starrett2654 $35.30Precision Machinist's Level, 18" & Case, Starrett2427 $383.00Precision Machinist's Level, 18", Starrett2425 $300.00Precision Machinist's Level, 4", Starrett2320 $91.00Precision Machinist's Level, 6", Starrett1846 $107.00Precision Machinist's Level, 8", Starrett3174 $132.00

$9.10Starrett hand scriber.Starrett catalog number 70A.The 1/4" diameter handle is of steel, knurled, and nickel plated. The scriber point is steel, properly hardened and finely tapered so that the location of the point is not obscured. The scriber is held firmly in the handle by a knurled chuck and when not in use can be reversed, telescoped into the handle, and locked by the chuck. The hexagon head prevents rolling.The scriber point is shipped reversed in the handle so the point is protected.

Scriber with 2-3/8" Point, Starrett1824

Scriber with 2-7/8" Point, Starrett2655 $11.50

$24.50● Tempered well-finished steel● Points are finely tapered● Nickel plated knurled handleScribers are steel, properly tempered and well finished. The points are finely tapered so that the scriber point can be easily seen on the work. The handle, as well as the points, has a knurled grip. The length of the scriber is 9" (225mm). Points screw into the handle and fit either end. The knurled handle is nickel-plated.

Scriber withTwo Tips, Starrett3885

$0.99● The original pen style permanent marker● Permanent on most surfaces● Quick-drying ink● Fade and water resistant● Marks on plastic, nmetal, cardboard, vinyl, leather and glassThis is the original Sharpie marker. It has many uses around the shop, including using it as layout fluid.

Sharpie Fine Point Permanent Marker, Black3605

Sharpie King Size Permanent Marker, Black3607 $1.59Sharpie Magnum Permanent Marker, Black3608 $2.95Sharpie Metallic Fine Point Permanent Marker3606 $1.95


Precision: Layout

$180.00Starrett 4-1/2" master precision square Starrett catalog number 20-4 1/2.The finest precision-checking squares - not graduated. Squareness accuracy to .0001" (0.0025 mm) every 6" (150 mm)These hardened steel squares are used when extreme accuracy is required. The beams and blades are hardened, ground, and lapped to insure parallelism and straightness. The beam is grooved at the inner corner for clearance of burr or dirt. Made of high quality tool steel, with the finest of craftsmanship throughout.

Square, 4-1/2" Master Precision, Starrett1841

$150.00● Starrett toolmaker's grade stainless steel square● Starrett catalog number 3020-6● Blade length 5 29/32"● Beam length 3 29/32"● Squareness accuracy to .0002" (0.005mm) for every 6" (150mm)These high quality toolmaker's squares feature hardened, ground, and lapped stainless steel construction on both the blade and the beam. The beam is machined at the inner corner for clearance.

Square, 6" Toolmakers, Starrett3173

Square, 3" Toolmakers, Starrett3172 $82.00Square, 4" Toolmakers, Starrett3564 $102.00

$19.95● For scribing lines, use on a surface plate● Includes 4" and 7" spindles● Bottom V-groove ground for cylindrical work● Retractable pins in base for working on flat surfaces● Fine adjustment

Surface Gage3069

$29.95● Black granite for long term stability● Grade B: ±0.0001 accuracy● Meets federal specification GGG-P-463CThese surface plates are checked with an auto-collimator for overall accuracy. All points on the surface are between two parallel planes 0.0002" apart.

Surface Plate 9"x12"3068

$9.95● 28 piece transfer punch set● Sizes from 3/32" to 1/2" by 1/64" plus a 17/32" punch● Heat treated and tempered tool steel for long life● Transfer punches are 0.0025" undersize

Transfer Punch Set 3/32" to 1/2"2031


Precision: Layout

● Includes 6 transfer screws in a wrench/holder● Transfer exact location of threaded holes● Works with blind holes

Transfer Screw Sets

Transfer Screw Set, 1/2"-13 Thread3082 $13.95Transfer Screw Set, 1/4"-20 Thread3079 $13.95Transfer Screw Set, 10-24 Thread3078 $13.95Transfer Screw Set, 3/8"-16 Thread3081 $13.95Transfer Screw Set, 4-40 Thread3074 $13.95Transfer Screw Set, 5/16"-18 Thread3080 $13.95Transfer Screw Set, 5-40 Thread3075 $13.95Transfer Screw Set, 6-32 Thread3076 $13.95Transfer Screw Set, 8-32 Thread3077 $13.95Transfer Screw Set, M10 Thread3087 $13.95Transfer Screw Set, M4 Thread3083 $13.95Transfer Screw Set, M5 Thread3084 $13.95Transfer Screw Set, M6 Thread3085 $13.95Transfer Screw Set, M8 Thread3086 $13.95

$2.95● Quick drying, Acid Free● Marks opaque and glossy on light or dark surfaces – just like paint● Fade-Proof, Water-Proof● Must be shipped by ground; not available outside the continental US Marks on virtually any surface; glass, metal, wood, rubber, stone, plastic, paper, vinyl, leather, felt, canvas and more.

Uni-Paint Valve Action Paint Marker - Black3609

Uni-Paint Valve Action Paint Marker - White3610 $2.95

$19.95● Six inch long blade● Set to any angle● Stainless steel● Made in USAThis high-accuracy T-bevel features both straight slots and offset slots in the blade and straight slots in the stock. This combination allows for the widest possible variety of adjustments. Align the T-bevel with the angle you want to duplicate, then tighten the knurled locking nut.

Universal Bevel, PEC3028

$93.00● Starrett Universal Bevel● Starrett catalog number 47● Wide variety of adjustment and angle settings● Blade is 6" (150 mm) longThis improved Universal Bevel has both offset and straight slots in the blade, in combination with straight slots in the stock that allow for a wide variety of adjustment and angle settings that are impossible to obtain with many ordinary bevels.Length of the blade is 6" (150 mm), and the stock, 3 1/2" (90 mm). The stock lies flat on the work or paper since the head of the clamping bolt is recessed. This tool can be set to duplicate an angle from a master, or it may be easily converted into a Bevel Protractor by using this tool with the No. 193 Protractor (PN 1833).

Universal Bevel, Starrett2227

Precision: Measuring

$21.95● Set of 18 angle gages● 5° to 90° by 5° increments● Satin chrome finish● Eight gaging surfaces on each gage● Check primary angle, 1/2 primary and complementary anglesThe angle gage set is furnished in a vinyl case for storage.

Angle Gage Set3103



$4.95● Sizes bolts, nuts, and screws● Sorts coarse threads, fine threads, and metric threadsSize bolt diameter by pushing bolt through sizing holes Gauges hex nuts and washers (USS, SAE)Gauges metric hex nuts and washers by holding under metric holesMeasure US and metric thread pitchSpecial notch gauges flat headed metal and wood screwsRuler marked with inches and millimetersSturdy and lightweight plastic resists water, alcohol, oil, and greaseFits in shirt pocket (8-5/8" x 3-1/4" or 217 mm x 82 mm)

BoltSize-It Bolt and Nut Checker3459

$69.95● Measure ID of holes from 2" to 6" in diameter● Close tolerance measurement of ID, taper and roundness● Furnished with AGD Group II dial indicator● Accuracy: 0.0005"● Includes fitted case and interchangeable anvilsThis dial bore gage is easy to calibrate with a ring gage or micrometer.

Bore Gage Set, 2" - 6" Dial3708

$6.95● Made of high quality steel● Satin chrome finish● Use for grinding and setting thread cutting tools● Gaging surfaces are precision groundCenter gage made in the US by Products Engineering Corporation (PEC).Used for grinding and setting screw cutting tools. Scales with 14ths and 20ths graduations provided on one side, 24ths and 32nds on reverse side. Scales are used to determine number of threads per inch. Gage also features a table of double depths of thread for selecting size of tap drills. Made of hardened spring tempered steel, with a protective satin chrome finish. All gaging surfaces are precision ground.

Center Gage, 60deg, PEC2743

$20.50● Starrett 60 degree center gage● Starrett catalog number C391● Extremely handy for use in grinding and setting thread cutting toolsThese gages meet the following standards: American National or U.S. 60°, Whitworth or English 55°, and Metric 60°. They also have a very useful scale for finding the number of threads per inch through graduations in 14ths, 20ths, 24ths and 32nds of an inch. The gage also has a table of double depths of threads for determining size of tap drills.

Center Gage, 60deg, Starrett1829

$39.95● Fine vertical adjustment with lock● 6" x 6" granite base flat within 0.0005"● 1" Diameter column, 8" tall● Includes a 0-1" x 0.001" dial indicatorThis granite dial gage comparator stand will accept any AGD 1, 2, 3, or 4 dial indicator.

Comparator Stand & Indicator2882



$59.00● Starrett 6" combination gage, 32nds/64ths● Starrett catalog number 236● Combination depth gage and protractorThis depth gage has an added feature permitting its use as a protractor for measuring angles. It is a simple, handy tool that is a welcome addition to any machinist's tool box.The head is graduated both left and right to 30, 45, and 60 degrees. The rule can be set to any of these angles by swinging the rule until the line on the turret coincides with the desired angleHead is made of hardened steel, ground, and nicely polished – 2 5/8" (66mm) long and 1/8" (3mm) wideOne side of the base is cut out to permit easier and more accurate readingsThe center of the head is recessed so that the tool will lay flat to permit more accurate measurementsA tempered rule that has been accurately machined divided, is smoothly fitted to the head and can be locked in position by a knurled nut

Depth Gage, Starrett 6" Combination3546

$44.50● Starrett steel rule depth gage, 0-6" range, 32nds/64ths● Starrett catalog number 237These very handy depth gages can be used to quickly obtain measurements in 64th of an inch by simply adjusting the rule to the required depth.The gage consists of a nicely finished, hardened steel head and an accurate, machine divided, tempered steel rule. The rule is Starrett No. 610N.The gage can be smoothly adjusted to the required measurement and then locked into position by a knurled nutThe base is cut out on one side, adjacent to the rule, permitting easier readings and more accurate measurements

Depth Gage, Starrett Steel Rule 0-6" Range, 32nds/64ths3547

$14.95● 0.25-1" dial indicator with 0.001" resolution● AGD Group I, 1.5" diameter dial face for tight locations● Rack & contact point made of hardened stainless steel● Jeweled movementThis 1/4" stroke dial indicator features large, easy to read numbers and crisp graduations. Each revolution is 0.100", indicated by the revolution counter. The resolution is 0.001". There is a mounting lug on the back of the case.

Dial Indicator, 0.25" x 0.001" Small Face3716

$145.50● Range: 1.000"● Face diameter: 2-1/4"● Shockless, hardened steel gear train and jewel bearings● Lug on center of the back● Includes case stem cap and lever controlStarrett catalog numbers 25-441J WCSC and PT99356These indicators have a shockless, hardened steel gear train and jewel bearings, except where noted. They are furnished with a lug-on-center back.The lever control provides an easy way to lift the measuring point off the work.

Dial indicator, 1" x 0.001" With Lever, Starrett3169

$127.00● Range: 1.000"● Face diameter: 2-1/4"● Graduations: 0.001"● Shockless, hardened steel gear train and jewel bearings● Lug on center of the backStarrett catalog number 25-441J.These indicators have a shockless, hardened steel gear train and jewel bearings. They are furnished with a lug on the center of the back.

Dial Indicator, 1”, Starrett1835



$21.95● 0-1" dial indicator with 0.001" resolution● Magnetic base indicator holder with fine adjustment● 22 piece indicator point set● All in a plastic caseThis 1" stroke dial indicator features large, easy to read numbers and crisp graduations. Each revolution is 0.100", indicated by the revolution counter. The resolution is 0.001". There is a mounting lug on the back of the case.The magnetic base indicator holder has a fine adjustment feature. The on/off switch makes it easy to position. The v-groove base allows you to mount it on cylindrical surfaces. Includes a 22 piece indicator point set and a plastic case.

SALE!Dial Indicator, Magnetic Base & Point Set1782

Dial Indicator and Magnetic Base1593 $19.95Dial Indicator, 1" x 0.0005"2873 $14.95Dial Indicator, 1" x 0.001"1236 $10.95Dial Indicator, 2" x 0.001"2726 $21.95Magnetic Back for Dial Indicator2531 $4.95Plastic Case for Magnetic Base and Dial Indicator2424 $4.95Point Set, Dial Indicator1783 $3.95

$153.00● Dial indicator with universal friction holder with shank● Graduation: 0.0005"● Range: 0.030"● Dial Reading: 0-15-0Starrett catalog number 711LPSZ.Steel Contact Point Length: 5/32" (4 mm) Steel Contact Point Ball Diameter: 0.120" (3 mm) These handy test indicators are among the most versatile available. Their small size and variety of attachments handle all jobs with ease and accuracy. A very useful feature is the shaded dial - when used with a mirror, such as in a jig bore application, the operator always knows where he is.

Dial Indicator, Starrett Last Word1819

$319.00● Starrett dial test indicator with attachments● Starrett catalog number 708ACZ● Range is 0.010" in either direction● Precision gear-driven design with smooth, jeweled movement● Dial test indicator comes in a fitted caseThese precision test indicators were designed to be positioned for easy and accurate readability. The versatility of the angled head, combined with the three dovetail mounts eliminates the need for having both vertical and horizontal style test indicators.Includes a dovetail body clamp, tool post holder, swivel post snug with dovetail indicator clamp, and a shug and rod unit.For extreme accuracy we recommend positioning the lever contact so that it is approximately 15° from being horizontal with the workpiece

Dial test indicator, 0-15-0 x 0.0001", Starrett3168

$29.95● Dial test indicator with 0.0005" graduations● Range is 0.030" in either direction● Includes 5/32" and 3/8" diameter posts, dovetails on the back and end, and an 0.080" diameter point● Dial test indicator comes in a fitted case● 7 jewel movement

Dial Test Indicator, 0-15-0 x 0.0005"1249

Dial Test Indicator, 0-15-0 x 0.0005" and Universal Magnetic Base3522 $54.95Dial Test Indicator, 0-4-0 x 0.0001"2875 $49.95



$69.95● Dial test indicator with 0.0005" graduations● Range is 0.030" in either direction● Includes 5/32" and 3/8" diameter posts, dovetails on the back and end, and an 0.080" diameter point● Dial test indicator comes in a fitted case● Jeweled movementThis Swiss-type horizontal dial indicator has a large 1.5" dial.

Dial Test Indicator, Interapid Style 0-15-0 x 0.0005"3709

$253.00● Starrett dial test indicator with dovetail mount● Starrett catalog number 708AZ● Dial test indicator with 0.0001" graduations● Range is 0.010"These precision test indicators were designed to be positioned for easy and accurate readability. The versatility of the angled head, combined with the three dovetail mounts eliminates the need for having both vertical and horizontal style test indicators. These are the features that make this series of test indicators superior to ordinary types.Angled head for better reading positionLarge 1 3/8" (35mm) dial diameterPrecision gear-driven design with smooth, jeweled movementMeet or exceed ISO accuracy specificationFor extreme accuracy we recommend positioning the lever contact so that it is approximately 15° from being horizontal with the workpiece.Three dovetail positioning mounts work with existing test indicator accessoriesInch reading indicators are available with easy-to-read, shaded white, solid red, or solid black dials - millimeter reading indicators with solid yellow dialsContact point reverses automatically, always maintaining clockwise hand rotationNarrow body for inreach abilitySatin chrome finish for durabilityLong carbide contacts 13/16" (20mm) are furnished as standard.Contacts are frictionally adjustable and replaceable

Dial Test Indicator, Starrett With Dovetail Mount, 0-5-0 x 0.0001"3548

$4.95● 1/16" to 1/2" fractional size drill gage● Quickly check drill sizesSturdy and lightweight plastic resists water, alcohol, oil, and grease.Fits in shirt pocket (3-3/8" x 7-9/16" or 86 mm x 193 mm)

Drill Gage3460

$49.50● Starrett Standard Letter Size Drill Gage, A-Z range● Starrett catalog number 198Letter size drills can be quickly and conveniently checked with this gage. Twenty-six holes are provided, giving corresponding drill sizes from "A" through "Z" with decimal equivalents from .234" diameter through .413" diameter.The gage is approximately 5/64" thick by 2 5/16" wide and 6 1/4" long, is hardened and has a satin finish. Thoroughly tested after hardening.

Drill Gage, Starret A-Z Drill Sizes3552

$55.00● Starrett Jobbers' Drill Gage, 1/16-1/2" Range● Starrett catalog number 187Using this gage, the size of any twist drill from 1/16-1/2" by 64ths can be quickly determined. The gage has a total of 29 holes, each marked with the drill size in inches and the decimal equivalent. Gage is rigidly tested after hardening and has a black matte finish. Gage information is steel stamped on one side and white marked on the reverse side for quick, clear reading. Approximately 5/64" thick by 2 5/16" by 6 1/4" long.

Drill Gage, Starrett Jobbers' 1/16-1/2"3551



$51.00● Starrett Drill Point Gage, 59° Bevel, 32nds Grad● Starrett catalog number 22C● The head is beveled to 59° (the correct drill point angle)● Graduated in 32nds along the 59° face for measuring the drill lipsThis gage was designed specifically for use in drill grinding. It provides a quick, accurate way for determining the correct drill point angle of 59° and the correct length of drill lips necessary for clean-cut drilling at maximum feeds and speeds.The sliding head may be adjusted to any position along the rule and locked by a thumb nut.The head is beveled to 59° (the correct drill point angle), and is also graduated in 32nds along the 59° face for measuring the drill lips which should be of equal lengths.The hook rule has accurate, machine-divided graduations in 8ths, 16ths, quick-reading 32nds and 64ths.Hook is adjustable and can be shortened or extended on either side of the rule, and may also be removed if desired.Tool can also be used as a Plain Rule, Hook Rule, Depth Gage, and Slide Caliper. The No. 22D Head-only will fit all steel rules 3/4" wide by 3/64" thick

Drill Point Gage, Starrett3557

$39.95● Measurement range is 0-0.5"● Resolution is 0.0005", accuracy is 0.0012"● Measures in inches or mm● Set to zero at any positionThere are three buttons; OFF for power, ZERO/ON to zero the display, and IN/MM to switch between inches and millimeters. The indicator turns on automatically when the plunger moves.Pressing ZERO/ON zeros the indicator at any position so you can make comparative readings between two parts.

Electronic Digital Indicator, 0.5"2876

$158.00● Starrett 0.5" digital electronic AGD Group 2 indicator● Starrett catalog number 3600-5● Range .500" (12.7mm)● Resolution .0005" (.01mm)● Reverse travel (± control indicates direction)This electronic digital indicator features a large, easy to read LCD display.You can set zero at any position and change the direciton that shows positive dimensions.The indicator has a 3/8" shank and the tip thread is #4-48. The case has a mounting lug on the back.

Electronic Digital Indicator, 0.5" Starrett3167

$59.95● Measurement range is 0-1"● Resolution is 0.0005", accuracy is 0.0012"● Measures in inches or mm● Set to zero at any position● Relative and absolute measurementThere are three buttons; ON/OFF for power, RESET to zero the display, and R/A to switch between absolute and relative measurement. Pressing R/A zeros the indicator at any position so you can make comparative readings between two parts. The absolute measurement is not lost, and is displayed by pressing R/A again.

Electronic Digital Indicator, 1"2521

$69.95● Stainless steel with satin chrome finish● Carbide tipped scriber for longer life● Fine feed adjustment● Positive lock screw

Height Gage, Dial 12"3092



$224.00● Starrett 0-6" (0-150 mm) range digital height gage● Starrett catalog number 3751AZ-6/150● Easy-to-read LCD with .32" high characters● Linear Accuracy: ï¿½.001" (ï¿½ 0.03mm)● Resolution: .0005" (0.01mm) Rounded nose scriber cuts clean, sharp linesEasy-to-read LCD with .32" high charactersThis digital height gage features Inch-millimeter conversion & zero at any position. It has a manual ON/OFF button but will also turn off automatically after 5 minutes of nonuse. The stainless steel bar is hardened for long life. The scriber can reference zero from the base bottom. It also has a slide lock & fine adjustment thumb roll, plus it features a hardened, ground, and lapped base.

Height Gage, Digital 6" Starrett3181

$12.95● Magnetic base indicator holder with fine adjustment● Permanent magnet has an 60 kg (130 lb) holding force● On/off switch makes it easy to position● V-groove base allows you to mount it on cylindrical surfacesThis magnetic base indicator holder has a fine adjustment feature. The on/off switch makes it easy to position. The V-groove base allows you to mount it on cylindrical surfaces. The permanent magnet has an 60 kg (130 lb) holding force.

Magnetic Base Indicator Holder1237

$29.95● Magnetic base indicator holder with one-knob lock● Permanent magnet has an 80 kg (176 lb) holding force● On/off switch makes it easy to position● V-groove base allows you to mount it on cylindrical surfacesThis magnetic base indicator holder locks all its joints when the knob is tightened. The on/off switch makes it easy to position. The V-groove base allows you to mount it on cylindrical surfaces. The permanent magnet has an 80 kg (176 lb) holding force.The lower arm is 110 mm long, the upper arm is 100 mm long.

Magnetic Base Indicator Holder2880

$24.95● This magnetic base is smaller than most● Unique central locking mechanism locks all motion with one knob● On/off switch makes it easy to position● V-groove base allows you to mount it on cylindrical surfaces● Base is 1.2" by 1.5". Maximum reach 7". This magnetic base is the perfect size for mini lathes and mini mills.It accepts dial indicators with 3/8" stems and dial test indicators with dovetails.

Magnetic Base Indicator Holder (Mini)2029

$21.95● Z-Limit brand guarantees professional quality● Magnetic base indicator holder with fine adjustment● Permanent magnet has an 65 kg (145 lb) holding force● On/off switch makes it easy to position● V-groove base allows you to mount it on cylindrical surfacesThis magnetic base indicator holder has a fine adjustment feature. The on/off switch makes it easy to position. The V-groove base allows you to mount it on cylindrical surfaces. The permanent magnet has an 66 kg (145 lb) holding force.

Magnetic Base Indicator Holder, Professional Quality3714



$114.00● Magnetic base with triple-jointed arm and fine adustment● Starrett catalog number 660The compact and versatile No. 660 Magnetic Base Indicator Holder has three adjustable pivots controlled by a single knob for fast, easy indicator positioning. Small but powerful magnetic base, with 70 lbs. (320 N) holding forcePositive On/Off switchBase Dimensions: 1 3/16 x 1 9/16 x 1 3/8" (30 x 40 x 35mm)Horizontal and vertical mounting positionsWill hold any indicator with a 3/8" (9.5mm) stem or standard dovetail mountArticulating arm with powerful central locking knob provides full 360° horizontal positioning and over 180° vertical positioningMaximum horizontal reach: 4.750" (120mm)Maximum vertical reach: 7.500" (190mm)Very sensitive fine-adjustment thumb screw

Magnetic Base Indicator Holder, Starrett3170

$160.00● Starrett Magnetic Base with Attachments● Starrett catalog number 657AA● Powerfull magnetic base holds firmly to steel and iron surfaces● Push button turns magnet on or off for quick, one-hand set-upFor use with all Starrett Test, Back-Plunger, AGD, Dial and Miniature-Dial Indicators. Also accommodates similar indicators of other manufacturers.A. No. 657P Magnetic Base. 1 15/16 x 1 5/8 x 1 7/8" (50 x 40 x 48mm). Push-button on/off switch for one-hand operation. Base has three precision ground, magnetic contact points. Grips horizontally, vertically, and upside down. V-step holds base to arbors, shafts, etc. Base has extra 1/4-20 tapped hole on one side for mounting post. Black wrinkle finish on non-working surfaces.B. No. 657G Upright Base Post. 3/8" (9.5mm) diameter x 7 7/16" (190mm) length overall. Starrett No. 57S and No. 58S Universal Snugs may also be used.C. No. 657S Snug. Two 1/4" (6.3mm) diameter holes. Adapts Nos. 196, 650, and 651 Series Dial Indicators and No. 657Y Indicator Attachment to No. 657X Rod.D. No. 657X Rod. 1/4" (6.3mm) diameter x 6" (150mm) long. Accommodates Starrett Nos. 708, 709, 811 and 711F Series Dial Test Indicators and No. 657S Sleeve.E. No. 657Y Indicator Attachment. 1/4" (6.3mm) O.D. one end, other end threaded and fits lug backs of all AGD indicators (Starrett Series Nos. 81, 25, 655, 656) and Series No. 80 Miniature Indicators.F. No. PT18724 Snug 3/8" (9.5mm) diameter post hole. 1/4" (6.3mm) diameter gripping hole accommodates No. 657X Rod.

Magnetic Base Indicator Holder, Starrett3549

$49.95● Overall height 3.75"● Powerful permanent magnet● Clamps on dovetail, 5/32", or 1/4" diameter stems● Includes stem adapter and mill adapter

Magnetic Test Indicator Holder3072

$29.95This 0-3" micrometer set features carbide faces and clear 0.0001" graduations on a satin-chrome finish. The frames are forged steel. 1" and 2" standards are included, as well as adjusting wrenches.The micrometers have a ratchet stop for exact repetitive readings and a lock lever to lock the barrel.The micrometers come in a fitted case.

Micrometer Set, 0-3"1248

Micrometer, 0-1"2877 $12.95



$119.95● Solid metal C-shape frame for all sizes● Graduation: 0.0001”● Hardened and precision ground anvil spindle thread with microlap finish on endsThis 0-6" micrometer set features carbide faces and clear 0.0001" graduations on a satin-chrome finish. The frames are forged steel. 1" through 6" standards are included, as well as adjusting wrenches.The micrometers have a ratchet stop for exact repetitive readings and a lock lever to lock the barrel.The micrometers come in a fitted case.

Micrometer Set, 0-6"3663

$15.95● 0.001" graduations on satin chrome finish● Great for checking small parts and working in tight quarters● Forged steel frame● Anvil and spindle are hardened and precision ground● Includes a fitted case

Micrometer, 0-0.6"3611

$150.00● Starrett 0-1" Electronic Digital Micrometer● Starrett catalog number 3734XFL-1 Action Features: ON/OFF button - also automatic OFF after 30 minutes of nonuse. Instant inch/millimeter conversion. Measurement HOLD button. Ability to zero tool at any position. Readability Features: Large, right-sized, high-contrast LCD digital readout is easy to read and reduces errors. Conventional inch or millimeter graduations standard. Attractive no-glare black wrinkle finish on the frame. Starrett no-glare satin chrome finish on thimble and sleeve.Ease-of-Handling Features: Balanced frame design for comfortable and accurate measuring. Ring-type knurled lock nut for quick and sure locking. Smooth friction thimble for uniform pressure. Gracefully designed tapered frame for use in narrow slots and tight places.Accuracy and Long-Life Features: Extremely hard and stable one-piece spindle (the heart of our accuracy). Micro-lapped carbide measuring faces. Starrett designed electronic microprocessor. One battery furnished for dependable power and over one year’s normal usage. Automatic OFF after 30 minutes of nonuse. Starrett workmanship.

Micrometer, 0-1" Digital, Starrett1845

$149.00● Starrett 0-1" micrometer● Starrett catalog number T230XRL● Accurate to 0.0001"This is the jewel of precision micrometers used by skilled workmen worldwide.The spindle and anvil are sized at .235" (6mm) to reach places most micrometers cannot reach.The balanced frame and thimble design insure easy handling and better readability. A ring-type knurled lock nut provides quick and sure locking. The combination ratchet and speeder provides uniform pressure and quicker adjustment. A gracefully designed tapered frame allows use in narrow slots and tight places.The micromenter has a rigid one-piece frame of drop forged steel and an extremely hard and stable one-piece spindle (the heart of the accuracy). It features micro-lapped measuring faces, quick and easy adjustment, plus Starrett workmanship.

Micrometer, 0-1" Starrett3180



$69.95● Measurement range is 0-1"● Resolution is 0.00005"● Protected from dust and water to IP54 per IEC529 standard● Large LCD display● Rugged plastic caseThis digital electronic micrometer with carbide measuring faces has a resolution of 0.00005". There are three buttons; ON/OFF, SET to zero the display, and ABS/INC to switch between absolute and incremental measurement. The micrometer turns itself off after about 5 minutes of inactivity.Pressing ABS/INC zeros the micrometer at any position so you can make comparative readings between two parts. The absolute measurement is not lost, and is displayed by pressing ABS/INC again.The IP54 code says that dust shall not penetrate in a quantity to interfere with satisfactory operation of the device or to impair safety, and water splashed against the device from any direction shall have no harmful effects.

Micrometer, Electronic Digital 2520

$4.95● Magnetic indicator holder● 5 positions for mounting accessories● Magnet has 45 pounds of holding force

Mini Magnetic Indicator Holder1642

$21.95● Made in the USA by hungry machinistsThis set of thread measuring wires includes 48 wires of 16 different diameters.You can measure threads from 3 to 48 threads per inch, and metric threads from 0.5 mm to 6 mm pitch. You can also measure Acme threads from 3 to 16 threads per inch.The thread measuring wires come with thread charts and are furnished with a quality vinyl case.This is a quality American-made product from Fisher Machine Shop. These are the original Pee Dee brand thread measuring wires.

Pee Dee Thread Measuring Wires1962

$59.95● 190 2" long pin gages● Each pin is up to 0.0002" under the marked size● Hardened to 60-62 Rc● Finished to 10 microinches● Furnished in a sturdy plastic case with sizes markedThese pin gages provide one of the best ways of measuring hole diameters. They can also be used to measure the distance between holes and for go/no go gaging.. This set includes 190 pin gages, one for each 0.001" from 0.061" to 0.250". Each of the pin gages are individually marked with their respective sizes.

Pin Gage Set, 0.061" to 0.250" Minus3720

Pin Gage Set, 0.011" to 0.060" Minus3879 $29.95

$69.00● Starrett steel protractor (0-180°), 6" blade, rectangular head● Starrett catalog number C183● Double graduations from 0-180° in two directions● The blade can be locked firmly at any angle by the lock nut● Satin chrome finish for ease of reading and resistance to rustThis is a highly useful and accurate tool for setting bevels, transferring angles, small squaring tasks, checking cutter clearances within certain limits, and many other applications.Double graduations from 0-180° in opposite directions permit the direct reading of angles and supplementary angles.The back of the tool is flat for ease of use.

Protractor, Rectangular Head, Starrett3556



$17.95● Measures angles from 0 to 180°● Semi-circular head is 3.3" x 2"● 6" arm can be locked in any position with knurled lock nut● Made of tempered steel with satin chrome finishProtractor made in the US by Products Engineering Corporation (PEC).Protractors are used for drawing radial lines, transferring angles, setting bevels, and setting tapers.

Protractor, Round Head, PEC2749

Protractor, Rectangular Head2750 $10.50Protractor, Rectangular Head, PEC2748 $17.95Protractor, Round Head2751 $10.50

$19.95● Set of 25 radius gages and holder● 1/64" to 17/64" radius by 64ths● 9/32" to 1/2" by 32nds● Satin chrome finish● Five gaging surfaces on each gage for both concave and convex radiiThe radius gage set is furnished in a vinyl case for storage.

Radius Gage Set2878

$149.00● Starrett 25 piece radius gage set ● Starrett catalog number S167CHZ● Radii Range: 1/64-17/64" 9/32-1/2"● Increments: 64ths, 32ndsRadii or fillets can be checked or laid out easier, faster, and more accurately with Starrett radius gages.Each set is furnished in an attractive case which provides complete protection and easy, instant selection of the right gage size for the job.Gage Features: Made of satin finish stainless steel - rust and stain resistant. Each gage is clearly marked with its radius. Each gage has five different gaging surfaces for both convex and concave radii. All gages have precision finished radii with extra smooth, accurate edges.Gage Holder Features: Any gage can be used with the Starrett No. 110 holder which is especially useful for checking radii in confined or hard-to-reach locations. Two slots are provided in the holder permitting gages to be held at 30° or 45°, either square in the slot or tipped to one side. The holder is 4" (100 mm) long, providing good reach and balance.

Radius Gage Set, Starrett1842

$13.95● #1 to 5/16" thread sizes● Quickly identify unified and American threads● NC, NF, and NS threads● Made in USAScrew checkers provide a quick way to measure standard threads. They provide all the information you need for screws; diameter, length, threads per inch, hole size and even tap drill sizes.

Screw Checker, Inch PEC3029

Screw Checker, Large Metric PEC3031 $15.25Screw Checker, Small Metric PEC3030 $13.95

$4.95● #0 to 3/4" coarse & fine threads● 1.6 mm to 16mm metric threads● Tap drill sizes on backSturdy and lightweight plastic resists water, alcohol, oil, and grease.Fits in shirt pocket (3-3/8" x 6-5/8" or 86 mm x 168 mm)

Screw Checker, Plastic3461



$66.00● Starrett screw pitch gage with 51 leaves● Starrett catalog number 472● Measures 60° threads from 4 threads per inch to 84 threads per inchStarrett screw pitch gages are among the most useful tools in any mechanic's toolbox. They quickly determine the pitch of various threads. These gages consist of a substantial steel case with a number of folding leaves at both ends, each leaf having teeth corresponding to a definite pitch, marked on each leaf. Starrett screw pitch gages are available in a wide range of sizes with different numbers of leaves in various pitch ranges with which to gage. The screw pitch gage features a locking device at both ends of the case, so leaves can be securely locked in position for use. Leaves have a special narrow design, permitting checking internal threads in nuts, etc., as well as external threads.

Screw Pitch Gage, Inch 51 Leaves Starrett3176

Screw Pitch Gage, Inch 30 Leaves, Starrett1834 $34.50Screw Pitch Gage, Metric 28 Leaves Starrett2617 $37.00

$29.95● Screw pitch gage with 51 leaves. Measures 60° threads from 4 threads per inch to 84 threads per inch● Narrow blades permit use for internal and external screw threads● Each blade clearly marked with thread size● Blades are protected in sturdy steel case● Locking device secures all blades for storage or positions an individual blade for useScrew pitch gage made in the US by Products Engineering Corporation (PEC).The correct pitch is determined by engaging the blade teeth with the threads you are measuring.This screw pitch gage measures the following screw pitches: 4, 4-1/2, 5, 5-1/2, 6, 7, 8, 9, 10, 11, 11-1/2, 12, 13, 14, 15, 16, 18, 20, 22, 24, 26, 27, 28, 30, 32, 34, 36, 38, 40, 42, 44, 46, 48, 50, 52, 54, 56, 58, 60, 62, 64, 66, 68, 70, 72, 74, 76, 78, 80, 82, and 84 threads per inch.

Screw Pitch Gage, Inch PEC2744

Screw Pitch Gage, Inch/Metric PEC2746 $15.95Screw Pitch Gage, Metric PEC2745 $15.95

$12.95● 4 small hole gages with 0.125" to 0.500" range● Full spherical ball for very accurate measurements● Hardened, satin-chrome plated measuring faces● Furnished in plastic pouch

Small Hole Gage Set, 4-Piece3093

$127.00● Starrett 4- piece small hole gage set● Starrett catalog number S829EZ● Range of 0.125-0.500" (3.2-12.7 mm)● Hardened-ball measuring surface with two-point contact● Smooth, sensitive adjustment for better feel, giving more accurate measurementsThese small hole gages are well balanced tools that are ideal for accurately measuring small holes, slots, grooves, and recesses in all kinds of work. The radius on each gage is less than the minimum diameter to be measured, which provides the two-point contact necessary for maximum accuracy.They have smooth, sensitive adjustment for better feel, giving more accurate measurements. The adjustment of the gage beyond their range is restricted by a safety stop that prevents breakageAccurate measurements are obtained by slightly "rocking" these gages in the hole to be measured. This will guarantee contact at the true diameter. The final size is then obtained by measuring over the ball contacts with a micrometer.Furnished in a vinyl pouch.

Small Hole Gage Set, 4-Piece Starrett3545

$4.95● 4R graduations, 8ths & 16ths, 32nds & 64ths● Hardened stainless steelThis precision, 6" long steel rule is flexible to fit into tight spots. The etched black graduations are easy to read against the non-glare finish.

Steel Rule, 6"1234



● Made from the finest quality steel available● Fully hardened and tempered with stain chrome finish● Precisely etched, then black filled for readability● Flexible rules are 1/2" wide and 0.015" thick● Rigid rules are 3/4" wide and 0.040" thick

Steel Rules, PEC

Steel Rule, 12" 4R Flexible, PEC2730 $14.50Steel Rule, 12" 4R Rigid, PEC2735 $15.95Steel Rule, 12" 5R Flexible, PEC2732 $14.50Steel Rule, 150 mm / 6" Flexible, PEC2733 $7.50Steel Rule, 150 mm / 6" Rigid, PEC2736 $7.95Steel Rule, 6" 4R Flexible, PEC2729 $7.50Steel Rule, 6" 4R Rigid, PEC2734 $7.95Steel Rule, 6" 5R Flexible, PEC2731 $7.50

Starrett precision steel rules are machine-divided, not photoengraved. They are inspected to Starrett Master Standards, which are traceable to the National Institute of Standards and Technology.Graduation No. 4R are 8ths, 16ths, quick-reading 32nds and 64ths.Graduation No. 16R are Quick-reading 32nds and 64ths, aircraft quick-reading 50ths and 100ths.Graduation No. 5R are quick-reading 10ths, aircraft quick-reading 100ths, 32nds and 64ths.Graduations No. 31 are 32nds and 64ths on one side; mm and 1/2 mm on reverse. Flexible rules are 1/2" wide and 1/64" thick.Rigid rules are 3/4" wide and 3/64" thick.

Steel Rules, Starrett

Steel Rule, 12" 5R Flexible, Starrett3175 $41.00Steel Rule, 150 mm 31 Flexible, Starrett1828 $21.50Steel Rule, 6" 4R Flexible, Starrett1826 $19.00Steel Rule, 6" 4R Rigid, Starrett2233 $20.50Steel Rule, 6" 5R Flexible, Starrett1827 $20.50

$59.00● Starrett hardened tap and drill gage● Starrett catalog number 185● Drill sizes number 1-60 (0.228-0.040")This highly useful gage shows at a glance the correct size tap drill for any common size machine screw tap in "NF" National Fine or "NC" National Coarse Thread Series, that will leave the right amount of stock for approximately 65% full thread. The gage also shows the correct body size drill to use. In addition, there are 60 holes marked with the number size and decimal equivalent of the drill that fits each hole. Example: a size 2-56 tap (No. 2 tap with 56 pitch) calls for a No. 50 tap drill and a No. 44 body drill.

The gage has a black matte finish with information steel stamped on one side and white marked on the reverse side for quick, clear reading. The gage is thoroughly tested for accuracy after hardening. Approximate size, 5/64" thick by 2 5/16" wide by 6 1/4" long.

Tap and Drill Gage, Starrett "Time Saver"3550

$127.00● Starrett telescoping gage set● Starrett catalog number S579GZ● Range: Four gages, 5/16" to 2-1/8"Starrett telescoping gages are used for determining the true size of holes, slots, and recesses up to 2-1/8" (54 mm). The ends of both contacts are hardened and ground to a radius to allow proper clearance on the smallest hole the gage will enter. These tools must be slightly "rocked" in the hole being measured to ensure that the tool is on the proper diameter before it is locked and withdrawn. The final hole size is obtained by measuring over the gage contacts with a micrometer. The No. 579 Series telescoping gages have handles that are rigidly attached to the contact plungers and are automatically self-centering. Also, the No. 579 gages have two telescoping contacts.The handles are approximately 2-3/8" (60 mm) long.Constant spring tension gives uniform contact pressure and both plungers are easily locked at any desired setting.

Telescoping Gage Set, 4-Piece Starrett1840

Telescoping Gage Set, 6-Piece Starrett2959 $219.00



$49.95● For measuring holes, slots and recesses● Measures holes from 5/16" to 2 1/8" diameter● Double action is self-centering● Satin chrome finish● Contact ends are hardened and groundUse telescoping gages to measure ID, deep holes, recesses, slots, grooves, and other hard to reach places.Measure the actual size or lock the self-centering plungers to a known size for a go-no go gage.The photo shows the 6-piece set. This set has the smaller 4 gages.

Telescoping Gage Set, 4-Piece, PEC3185

Telescoping Gage Set, 6-Piece, PEC3184 $70.95

$12.95● For measuring holes, slots and recesses● Measures holes from 5/16" to 6" diameter● Double action is self-centering● Satin chrome finish● Contact ends are hardened and ground to the radius of the smallest diameter

Telescoping Gage Set, 6-Piece2879

$9.95● Clamping diameter of 1-7/8"● Length from the center of the clamp to the indicator can be up to 6-1/2"● Clamps to the outside of an end mill holder and does not disturb the working toolThis test indicator holder has a clamping diameter of 1-7/8". The length from the center of the clamp to the indicator can be up to 6-1/2".The test indicator clamps to the outside of an end mill holder and does not disturb the working tool.

Test Indicator Holder1251

$17.95● Z-Limit brand guarantees professional quality● Clamping diameter of 1-3/8"● Length from the center of the clamp to the indicator can be up to 6-1/2"● Clamps to the outside of an end mill holder and does not disturb the working toolThis test indicator holder has a clamping diameter of 1-3/8". The length from the center of the clamp to the indicator can be up to 6-1/2".The test indicator clamps to the outside of an end mill holder and does not disturb the working tool.

Test Indicator Holder, Professional Quality3771

$207.00● Starrett Back-Plunger Dial Indicator● Starrett catalog number 196A1Z● 0-100 with 3 Contact Points, Adapter, 4 Attachments in Case● Accurate and reliable● Rugged, with few moving partsThe Starrett No. 196 Indicator is one of the most versatile indicators available, and it is the "granddaddy" of them all. Over the years this tool has been improved by methods and materials but the basic design is unchanged. The design is older than most of you and has withstood the test of time and beaten all challengers because it is:Accurate and reliableSimple to operateRugged, with few moving partsSmooth in operationInexpensive - the best indicator value you can buyThis indicator with graduations to .001" will handle by far the majority of jobs. Shank diameter is 1/4" (6.3 mm). For full use, first choose the proper contact from the three hardened contact points that are included. Then the contact is brought against the work with enough pressure to give the hand one full turn. Set the hand at zero by rotating the dial with the knurled bezel. This provides one full rotation of the hand both to the right and left of zero, showing a rise or drop in the work and the amount of that variation.

Universal Back-Plunger Dial Indicator, Starrett2452


Precision: Sets

Precision: Sets

$54.95● 0-1" dial indicator with 0.001" resolution● 0-15-0 dial test indicator with 0.0005" resolution● Magnetic base indicator holder with fine adjustment● 22 piece indicator point set● All in a plastic caseThe 1" stroke dial indicator features large, easy to read numbers and crisp graduations. Each revolution is 0.100", indicated by the revolution counter. The resolution is 0.001". There is a mounting lug on the back of the case.The dial test indicator has 0.0005" graduations and a 7 jewel movement. Its range is 0.030" in either direction. Includes 5/32" and 3/8" diameter posts, dovetails on the back and end, and an 0.080" diameter point.The magnetic base indicator holder has a fine adjustment feature. The on/off switch makes it easy to position. The v-groove base allows you to mount it on cylindrical surfaces. Includes a 22 piece indicator point set and a plastic case.

Dial Indicator, Test Indicator, Magnetic Base & Point Set2925

Dial Indicator, Magnetic Base & Point Set1782 $21.95SALE

$89.50● 0-1" Electronic digital Indicator, 0.001" resolution, 0.001" accuracy● 0-6" Electronic digital caliper, 0.0005" resolution, 0.001" accuracy● Magnetic base with fine adjustment● Includes fitted case● PEC Tools brandThere are three buttons on the indicator and caliper; ON/OFF for power, ZERO to zero the display, and INCH/MM to switch between display of inches and mm.

Electronic Indicator, Electronic Caliper, and Magnetic Base Set3073

$64.95● 1" Dial indicator, magnetic base and point set● 0-30-0 Dial test indicator● 0-1" micrometer● 6" Dial caliper● Plastic caseThis set includes all the basic precision measuring tools.The micrometer has a range of 0-1" and a resolution of 0.0001". An adjustment wrench is included.The dial caliper has a range of 0-6" and a resolution of 0.001".The dial test indicator has a range of 0.030" in either direction and a resolution of 0.0005". It includes 5/32" and 3/8" diameter posts, dovetails on the back and end, and an 0.080" diameter point.The dial indicator has a range of 0-1" and a resolution of 0.001". Each revolution is 0.100", indicated by the revolution counter. There is a mounting lug on the back of the case. The magnetic base has on on-off switch for the magnet and incorporates a fine adjustment feature. The point set includes 22 of the most popular points. All have #4-48 threads for use in AGD 1,2,3, and 4 indicators.

Inspection Kit, 6-Piece2518

$39.95● 6" electronic digital caliper● 6" steel rule● 1" stroke dial indicator● Magnetic base indicator holder● Starrett Tools & Rules for Precision Measuring bookletThis kit includes the basic measurement tools you need for the mini mill, mini lathe or other small machines.The magnetic base includes a fine adjustment.

Measurement Starter Kit with Digital Caliper1260

Measurement Starter Kit with Dial Caliper1259 $29.95


Precision: Setup

Precision: Setup

$29.95● Made of precision ground tool steel● Easily expanded to size in openings for quick reference measurements● Lock desired size by set screws provided● Exact size can be set with micrometer● Furnished in fitted plastic case with size range markingsSix piece adjustable parallel set.Parallels are adjustable to the following sizes: 3/8” - 1/2”, 1/2” - 11/16”, 11/16” - 15/16”, 15/16” - 1-5/16”, 1-5/16” - 1-3/4”, 1-3/4” - 2-1/4”.The parallels are 5" long and 1/4" thick.

Adjustable Parallel Set2552

$29.95● Simple, quick angle set ups● Manufactured of hardened, stabilized and ground steel● Accurate to ±0.0001” per inch● Fitted case● Angle blocks are 3" long and 0.25" thickTen piece angle block set.The angles included are 1°, 2°, 3°, 4°, 5°, 10°, 15°, 20°, 25°, 30°. You can combine them to make any integral angle.

Angle Block Set2553

$13.95● 3" long, 2.5" tall, and 2" wide● Accurately machined and ground square and parallel on outside and ends● Slots provide many options for mounting● widely used for machining, layout and inspection● High tensile cast iron is properly seasoned to prevent distortion

Angle Plate, 3" Slotted & Webbed3431

Angle Plate, 4.5" Slotted & Webbed3432 $17.95

$12.95These precision 1-2-3 blocks are ground and case hardened on all sides to 50-60 Rc. The blocks are 1" by 2" by 3". They are parallel within 0.0002", flat within 0.0002" and square within 0.0002".Each set includes two matched blocks.The blocks have 23 holes through them, 5 are threaded 3/8-16 NC.

Blocks, 1-2-31233

Blocks, 2-4-63666 $80.95

$29.95These ultra precision 1-2-3 blocks are ground and case hardened on all sides to 55-60 Rc. They are parallel within 0.0001", flat within 0.0001" and square within 0.0001". They are up to 0.0003" oversize for lapping.Each set includes two matched blocks.The blocks have 23 holes through them, 5 are threaded 3/8-16 NC. Set includes a matched pair of 1-2-3 blocks, 5 3/8-16 x 1.5" socket head cap screws and an appropriately-sized hex wrench. Furnished in a fitted case.

Blocks, 1-2-3 Ultra Precision2881

$14.95● Machinist's jack● Two extension bases● Auxiliary pointed screw● Inner and outer V bases● 1" diameter, 1.5" to 2.3" tallMachinist's jacks are used to support odd sized or odd shaped objects. Use them to support the ends of long workpieces that extend beyond your vise jaws. Use them to support the edges of items that you are clamping with your clamping kit.The machinist's jack includes lots of parts that you can mix and match to meet your needs.

Machinist's Jack Set2907


Precision: Setup

$29.95● Working face accurate to 0.00003" per inch of length● 5.00" center distance of rolls accurate to 0.0002"Use a sine bar and space blocks to set or measure extremly accurate angles.The 1-2-3 block is not included.

Sine Bar, 5"3525

Sine Bar, 100 mm3760 $33.00Sine Bar, 2.5"3535 $33.00

$29.95● Set of ten pairs of thin parallels in a fitted case● Parallels are 1/8" thick and 3" long● Heights are 1/2", 5/8", 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-3/8", 1-1/2", and 1-5/8"● Made of high grade alloy steel hardened to 52 to 58 Rc● Parallel within 0.0002" on the top and bottom. The pairs are matched in height within 0.0004"These 3" long thin parallels are great for the small vises used on the mini mill.

Thin Parallels, 3" Long 10 Pairs1893

Thin Parallels, 3" Long 4 Pairs2924 $14.95Thin Parallels, 6" Long 10 Pairs1232 $29.95

$94.95● Set of ten pairs of thin parallels in a fitted case● Parallels are 1/8" thick and 3" long● Heights are 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1-1/16"● Made of A2 tool steel hardened to 57 to 59 Rc● Parallel within ±0.0001" on the top and bottom. The pairs are matched in height within ±0.0001"These 3" long thin parallels are great for the small vises used on the mini mill.These thin parallels were made in the USA for us by the A. R. Warner Co. This set of 1/8" thin parallels contains 10 pairs of parallels that step in 1/16" increments. This gives you more sizes you can use in our small vises. These parallels do not have holes in them.

Thin Parallels, 3" Long 10 Pairs Ultra-Precision2220

$29.95● Set of 20 pairs of ultra thin parallels in a fitted case● Parallels are 1/32" thick and 6" long● Heights are 1/2" to 1-11/16" in 1/16" steps● Made of high grade alloy steel hardened to 50 Rc● Parallel within 0.0001" on the top and bottom. The pairs are matched in height within 0.0001"The heights of the parallels are 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1-1/16", 1-1/8", 1-3/16", 1-1/4", 1-5/16", 1-3/8", 1-7/16", 1-1/2", 1-9/16", 1-5/8", and 1-11/16".

Ultra Thin Parallels, 6" long2923

$39.95These precision V-blocks are made of hardened steel.They are ground square, parallel and concentric within 0.0001".The V-blocks are supplied in matched pairs.

V-Blocks, 1-1/4" x 1-1/4" x 1-5/8"1794

$99.95● Hold miniature round parts in these small V-blocks● Bridges straddle long workpieces allowing use of hold-down screw of containing V-block● Hardened and precision ground● Square and parallel to 0.0002"● Includes fitted caseThese little V-blocks, held in larger V-blocks, provide a unique and universal way to hold small and intircate parts.Set includes two V-blocks, one with a 0.030" to 0.15" capacity and one with a 0.05" to 0.28" capacity. Also are two bridges and five upper prisms providing 1/8", 5/32", & 3/16" capacity.

V-Blocks, Miniature 0.03" to 0.28" Capacity3718


Project Plans: Boats

Project Plans: Boats

$25.00● Radio controlled 36" model tug boat runs on live steam● Build the 2 cylinder steam engine from bar stock● Build the copper boiler● Build the boat, including propeller and rudder● Install the radio controlComplete plans to build a steam driven, radio controlled model of a tug boat.These plans were created by Bill Reichart.There are 30 pages of plans that cover building the boat including, building the boiler out of copper, and building the steam engine out of bar stock, and building the deck and cabin out of wood. The hull is fiberglass.Sources are provided for all purchased parts including propane, the ceramic burner, and the fiberglass hull.

Buffalo Pup Steam Tug Boat Plans2515

Project Plans: Conversions

$49.95Plans to add CNC to a mini lathe. These plans were created by Ronald J. Steele.This is a complete set of plans to add CNC to a mini lathe. They include a materials list with sources, plans for all the parts, and instructions for making the parts and installing them on the mini lathe.Changes to the original machine are minimal. Three drilled and tapped holes are put into the tail end of the lathe bed to hold the Z axis lead screw thrust washer seat/motor mount plate. The remaining motion control parts are either attached via existing holes or clamped onto the machine.Project completion time is 30 to 40 hours. Cost for mechanical hardware and materials is between $180 and $220. The plans provide several sources for the electrical parts and software.

Mini Lathe CNC Plans2395

$49.95Plans to add CNC to a mini mill. These plans were created by Ronald J. Steele.This is a complete set of plans to add CNC to a mini mill. They include a materials list with sources, plans for all the parts, and instructions for making the parts and installing them on the mini mill.The only permanent change made to the mini mill is to drill and tap two holes.Ron Steele says the cost of the hardware and materials, assuming you need to purchase everything, is about $160. The plans provide sources for all these items. The plans also provide several sources for the electrical parts and software. One kit includes software, 145 oz/in stepper motors, and a pre-wired boxed controller and sells for $645. It takes between 20 and 30 hours to machine the parts and bolt it all together.

Mini Mill CNC Plans2353

Project Plans: Engines

$11.00Complete plans to build a unique 5-cyliner steam engine.These plans were created by Bill Reichart.This steam engine has 10 pistons and no crankshaft. The plans include six pages of detailed drawings and construction notes. The engine is made from bar stock. No castings are required.

Elbow Engine Plans2342

$21.00Complete plans to build an epicyclic steam engine.These plans were created by Bill Reichart.This engine uses a unique set of epicyclic gears where one gear revolves around another gear. There are 33 pages of plans that detail every part and describe methods of production. The engine is made from bar stock. No castings are required. You get the gears from Boston Gear.

Epicyclic Steam Engine Plans2340


Project Plans: Engines

$22.00Complete plans to build a 4-cylinder, 4-cycle gasoline engine.These plans were created by Bill Reichart.The Panther Pup is an air-cooled internal combustion engine. There are 54 pages of plans, bound in a saddle-stitched booklet. The plans include detailed drawings of each part along with complete construction notes.Two castings are required. Plans are included to make your own patterns, or castings can be purchased from LittleMachineShop.com.

Panther Pup Engine Plans2341

Panther Pup Engine Castings, Aluminum2355 $106.95Panther Pup Engine Castings, Brass2354 $209.95

$8.00Complete plans to build a simple steam engine.These plans were created by Bill Reichart.The Pip-Squeak was designed to be a very first, easy to build engine. It is build from bar stock. No castings are required. It can be made on a small hobby lathe and a small drill press. A small milling machine helps, but isn't necessary.

Pip-Squeak Engine Plans2343

$25.00Complete plans to build a four-cylinder Stirling cycle engine from bar stock and commercial components.These plans were created by Ronald J. Steele.The package contains 26 pages of highly detailed drawings and instructions providing all the necessary information to produce this modern compact version of a Stirling engine. The Stirling-Steele engine can be machined on a 6" lathe and small milling machine from readily available material. A full bill of materials is included as are assembly instructions. This is not a kit but a full set of dimensioned drawings.

Stirling-Steele Engine Plans2295

Project Plans: Tools

$49.95● 17 pages of plans● 18 pages of instructions● 2" x 72" belt stays sharp longer and cuts cooler than shorter belts● Use for roughing, shaping, contouring of flat or angular stockPlans for a commercial-grade square wheel belt grinder. Machines like this sell for over $1000.This project consists of 17 pages of drawings and 18 pages of well written instructions. The drawings are printed on 11 x 17 paper, making them easy to read. Every aspect of this project has been explained and detailed, including 3 dimensional assembly drawings to show you where everything goes. Although this machine would feel right at home in a professional metal worker's shop, the average home shop machinist will also find endless uses for this grinder. Use it for deburring, sharpening drill bits, dressing mushroomed punches, and grinding HSS lathe tool bits. Although this project is not for a beginner, it was designed with the home shop machinist in mind. Anyone with modest equipment can complete this high performance machine. The prototype was built primarily with a 7" lathe, a drill press, and a MIG welder.

Belt Grinder Plans2717


Project Plans: Tools

$7.00The Rike-Vise was invented by Bill Reichart. This simple tool is especially designed for the home machine shop. For many jobs it will replace a standard vise. The Rike-Vise is described as two 90° angle plates joined at the corner, and providing a foot so it can be easily clamped to a machine table or a lathe faceplate. The square donut piece provides an accurate clamp to secure a work piece in the base. It is made of mild steel. The plans include tips on accurately building the vise, plus details on using it.The plans comprise six 8-1/2" x 11" pages. The plans include information on building and using the Rike-Vise.Features of the Rike-Vise:At the lathe you can turn square stock round or drill square stock perfectly concentric.You can also do the same to rectangular stock, and drill or turn it in the exact center or to one side, as you desire.The vise holds work perpendicular for drilling at your drill press.At the milling machine, you can mill an end perfectly square, or notch or groove perfectly parallel to the sides.It holds stock perpendicular for use at the surface grinder.

Rike-Vise Plans2304

QC Tool Posts: QCTP Sets

$99.95● Fits 7x10, 7x12 and 7x14 mini lathes● Made from 6061 T6 Aluminum● Hard Anodized for durability and appearance● No tools required to change tools● Additional tool holders availableThis quick change tool post set (QCTP) includes the tool post, mounting hardware, two turning tool holders, a boring tool holder and a cut-off blade holder.Made by A2Z CNC.The turning tool holders accept tools with 1/4" to 3/8" shank. The boring tool holder accepts boring bars with 3/8" shanks. The cut-off tool holder holds 1/2" tall parting blades.This tool post mounts with an M10 bolt.

Quick Change Tool Post Set by A2Z CNC2461

QC 1/2" Boring Tool holder, A2Z CNC2587 $21.75QC 3/8" Boring Tool holder, A2Z CNC2484 $19.75QC Blank Tool holder, A2Z CNC3445 $13.50QC Cut-Off Tool holder, A2Z CNC2485 $21.75QC Turning Tool holder, A2Z CNC2483 $17.25QC Turning Tool holder, A2Z CNC, Pack of 43825 $67.00Quick Change Tool Post Set by A2Z CNC Plus 2 Extra Turning Tool Ho3691 $133.45Quick Change Tool Post Set for 8x12 and 8x14 Lathe2713 $99.95Quick Change Tool Post Set for 9x20 Lathe2271 $99.95Quick Change Tool Post Set for Atlas/Craftsman 6"2486 $99.95Quick Change Tool Post Set for C4 Lathe3474 $99.95Quick Change Tool Post Set for Prazi & Emco2488 $99.95Quick Change Tool Post Set for Sherline2477 $99.95Quick Change Tool Post Set for Taig2478 $99.95Quick Change Tool Post Set for Unimat 3 & 4, SIEG C0 Lathes2487 $99.95



$129.95● Quick change tool post set for lathes with up to 9" swing● 60% of AXA, or series 100 size wedge tyoe QCTP● All steel construction● Includes five tool holdersThis is a true wedge type quick change tool post set that is an exact 6/10 scale copy of the AXA, or series 100 wedge type quick change tool post.This quick change tool post set is designed for lathes with up to 9" swing. It requires 3/4" from the top of the compound rest to the center of the lathe.It will hold turning tools with shanks from 1/4" to 1/2". It will hold 3/8" and 1/2" boring bars. It will hold 1/2" tall cut-off blades.All working parts are hardened and ground. It is completely sealed for maintenance-free operation.This set includes the tool post and the following tool holders:No. 1 - Turning & Facing, No. 2 - Boring, Turning & Facing, No. 4 - Heavy Duty Boring, No. 7 - Universal Parting Blade, No.10 - Knurling, Facing & Turning.This tool post mounts with an M10 stud that is included. It also includes a piece of steel from which you can make a T-slot nut to fit your lathe.

Quick Change Tool Post Set, 0XA3048

$155.00● Quick change tool post set for lathes with up to 12" swing● AXA, or series 100 size● Tool holders interchange with Aloris, Dorian, and Phase II● All steel construction● Includes five tool holdersAXA, or series 100, wedge type quick change tool post set.This quick change tool post set is designed for lathes with up to 12" swing.It is a good fit on 9x20 lathes. Many people feel that these tool posts are too large for mini lathes, but others like the mass and rigidity they provide. All working parts are hardened and ground. It is completely sealed for maintenance-free operation.The tool holders interchange with Aloris, Dorian, and Phase II.This set includes the tool post and the following tool holders:No. 1 - Turning & Facing, No. 2 - Boring, Turning & Facing, No. 4 - Heavy Duty Boring, No. 7 - Universal Parting Blade, No.10 - Knurling, Facing & Turning.This set also includes a piece of steel from which you can make a T-slot nut to fit your lathe.

Quick Change Tool Post Set, AXA2280

AXA QC Tool Post Mount for 9x203712 $9.95Compound Rest Top, for AXA QCTP on C6 Lathe3787 $35.95QC Boring Tool holder, AXA2283 $19.95QC Cut-Off Tool holder, AXA2284 $21.95QC Knurling & Turning Tool holder, AXA2285 $24.95QC Turning & Boring Tool holder, AXA2282 $15.95QC Turning & Facing Tool holder, AXA2281 $13.95Set Screws, Tool Retaining, Set of 103970 $7.95Tap & Tap Drill Bit, 9/16"-18 Thread3674 $13.95



$415.00● AXA, or series 100 quick change tool post set for lathes with up to 12" swing● Made by Aloris, the originator of the super precision quick change tool post● Tool holders interchange with Aloris, Dorian, and Phase II● All steel construction● Starter set Includes two tool holdersAloris Tool Technology Company is the originator of super precision Quick Change Tool Posts and tool holders for over 60 years. Since 1946, Aloris has revolutionized the metal working industry with the introduction of the first quick change tool post and has since been the standard of the industry, known worldwide for our integrity and lasting quality.AXA, or series 100, wedge type quick change tool post set. This quick change tool post set is designed for lathes with up to 12" swing. It is a good fit on 9x20 lathes. Many people feel that these tool posts are too large for mini lathes, but others like the mass and rigidity they provide. All working parts are hardened and ground. It is completely sealed for maintenance-free operation.The tool holders interchange with Aloris, Dorian, and Phase II.This set includes the tool post and the following tool holders:No. 1 - Turning & Facing, No. 2 - Boring, Turning & Facing.This set also includes a piece of steel from which you can make a T-slot nut to fit your lathe.

Quick Change Tool Post Set, AXA Aloris3876

$239.95● Quick change tool post set for lathes with 10-15" swing● BXA, or series 200 size● Tool holders interchange with Aloris, Dorian, and Phase II● All steel construction● Includes five tool holdersBXA, or series 200, wedge type quick change tool post set.This quick change tool post set is designed for lathes with up to 10-15" swing.All working parts are hardened and ground. It is completely sealed for maintenance-free operation.The tool holders interchange with Aloris, Dorian, and Phase II.This set includes the tool post and the following tool holders:No. 1 - Turning & Facing, No. 2 - Boring, Turning & Facing, No. 4 - Heavy Duty Boring, No. 7 - Universal Parting Blade, No.10 - Knurling, Facing & Turning.This set also includes a piece of steel from which you can make a T-slot nut to fit your lathe.

Quick Change Tool Post Set, BXA3658

$224.95This is a high quality quick change tool post for the mini lathe.It holds tools up to 3/8" shank.The set includes:Tool postTurning tool holderTurning and boring tool holderBoring bar holderMulti tool holderCut-off tool holderThis is similar to the Phase II Micro Quick-Change Tool System, Phase II part number 251-075.

Quick Change Tool Post Set, Micro1672

QC Boring Tool holder, Micro1864 $35.00QC Cut-Off Tool holder, Micro1866 $38.00QC Multi Tool holder, Micro1865 $36.00QC Turning & Boring Tool holder, Micro1863 $31.00QC Turning Tool holder, Micro1862 $28.00Quick Change Tool Post, Micro1867 $75.00



$129.95● Quick change tool post set for lathes with up to 8" swing● 0XA, or series 000 size (60% of AXA size)● Includes five tool holders● All steel constructionWedge type quick change tool post set.This quick change tool post set is designed for lathes with up to 8" swing.It is the perfect size for mini lathes. The tool holders have been designed specifically to work on the mini lathes and other lathes that have limited distance from the top of the compound to the center of the lathe. This tool post mounts with an M10 stud, which is included.This quick change tool post requires 5/8" from the top of the compound rest to the center of the lathe.All working parts are hardened and ground. It is completely sealed for maintenance-free operation.This tool post mounts with an M10 stud.This set includes the tool post and the following tool holders:No. 1 - Turning & Facing, No. 2 - Boring, Turning & Facing, No. 4 - Heavy Duty Boring, No. 7 - Universal Parting Blade, No.10 - Knurling, Facing & Turning.Note: The photo is an AXA QCTP. The tool holders on the 0XA vary slightly from the photo because they are optimized for small lathes.

Quick Change Tool Post Set, Tormach 0XA3112

QC 2MT Tool Holder, Tormach 0XA3119 $19.95QC Boring Tool Holder, Tormach 0XA3116 $19.95QC Cut-Off Tool Holder, Tormach 0XA3774 $21.95QC Cut-Off Tool Holder, Tormach 0XA3117 $21.95QC Knurling & Turning Tool Holder, Tormach 0XA3118 $26.95QC Turning & Boring Tool Holder, Tormach 0XA3115 $14.95QC Turning & Facing Tool Holder, Tormach 0XA3114 $13.95Quick Change Tool Post, Tormach 0XA3113 $89.95

Rotary Tables: Rotary Tables

See the rotary table comparison chart at the back of this catalog.Rotary Table Comparison

$249.95This horizontal / vertical rotary table is for indexing, circular cutting, angle setting, boring, and spot facing operations. The meehanite cast iron table is precision machined and has a 2 Morse taper center hole. The table is graduated with a 360° scale. A micro collar graduated to one minute with a ten second accuracy vernier scale is provided. The rotary table has lock down clamps and the crank can be disengaged.The worm gear and center hole are hardened and ground.The table is 2.76" high when horizontal, and the centerline is 2.76" above the table when in the vertical position.The worm ratio is 72 to 1.Flatness of clamping surface: 0.0006" TIRParallelism of clamping surface to base: 0.0008" TIRSquareness of clamping surface to angle face: 0.0004" TIRSquareness of clamping surface to center slot: 0.0008" TIRConcentricity of center bore: 0.0008" TIRMaximum spacing error: 1 minute, 20 seconds.Dividing plates and a tailstock are available for this rotary table. You can get all three items for a significant savings as our part number 1931.

Rotary Table, 4" H/V1927

Dividing Plate Set for 4" Rotary Table1799 $74.95Rotary Table, 4" with Tailstock & Dividing Plate1931 $349.95Rotary Table, 4" with Tailstock, Dividing Plate, & 3-Jaw Lathe Chuck3791 $429.95Rotary Table, 4" with Tailstock, Dividing Plate, & 4-Jaw Lathe Chuck3792 $414.95Tailstock for 4" Rotary Table1800 $74.95T-Slot Nuts (6 mm) and Clamping Bars1943 $17.95



$279.95This horizontal / vertical rotary table is for indexing, circular cutting, angle setting, boring, and spot facing operations. The meehanite cast iron table is precision machined and has a 2 Morse taper center hole. The table is graduated with a 360° scale. A micro collar graduated to one minute with a ten second accuracy vernier scale is provided. The rotary table has lock down clamps and the crank can be disengaged.The worm gear and center hole are hardened and ground.The table is 2.76" high when horizontal, and the centerline is 2.76" above the table when in the vertical position.The worm ratio is 72 to 1.Flatness of clamping surface: 0.0006" TIRParallelism of clamping surface to base: 0.0008" TIRSquareness of clamping surface to angle face: 0.0004" TIRSquareness of clamping surface to center slot: 0.0008" TIRConcentricity of center bore: 0.0008" TIRMaximum spacing error: 1 minute, 20 seconds.Dividing plates and a tailstock are available for this rotary table. They are the same ones that work with our H/V rotary table (PN 1927).

Rotary Table, 4" Phase II1727

$169.95● 4" (100 mm) diameter● Use in horizontal or vertical position● Worm ratio is 72 to 1● 10 second rotational accuracy● 2 Morse taper center holeThis horizontal / vertical rotary table is made of precision machined cast iron and has a 2 Morse taper center hole. The table is graduated with a 360 degree scale. The rotary table is furnished with lock down clamps.This rotary table comes with an adapter to mount a 3" lathe chuck. It works with both 3- and 4-jaw chucks.The table is 2.87" high when horizontal, and the centerline is 2.68" above the table when in the vertical position. The body of the table is 5" (crank handle to back) by 5.5" (mounting slot to mounting slot). The worm ratio is 72 to 1.Flatness of clamping surface: 0.0008".Parallelism of clamping surface to base: 0.0008".Squareness of clamping surface to angle face: 0.0012".Squareness of clamping surface to center slot: 0.0012".Concentricity of center bore: 0.0008" TIP.A dividing plate and a tailstock are available for this rotary table. You can get all three items for a significant savings as our part number 2183.

Rotary Table, 4" Precision1810

Adapter, 3" Lathe Chuck3146 $28.95Adapter, 3" Lathe Chuck1888 $28.95Dividing Plate Set for 4" Rotary Table1811 $59.95Rotary Table, 4" with Tailstock & Dividing Plate2183 $239.95Rotary Table, 4" with Tailstock, Dividing Plate, & 3-Jaw Lathe Chuck3131 $299.95Rotary Table, 4" with Tailstock, Dividing Plate, & 4-Jaw Lathe Chuck3132 $289.95Tailstock for 4" Rotary Table1812 $59.95T-Slot Nuts (8 mm) and Clamping Bars3442 $24.95T-Slot Nuts (8 mm) and Clamping Bars1813 $14.95



$295.95This horizontal / vertical rotary table is for indexing, circular cutting, angle setting, boring, and spot facing operations. The meehanite cast iron table is precision machined and has a 2 Morse taper center hole. The table is graduated with a 360° scale. A micro collar graduated to one minute with a ten second accuracy vernier scale is provided. The rotary table has lock down clamps and the crank can be disengaged.The worm gear and center hole are hardened and ground.The table is 3.35" high when horizontal, and the centerline is 4.92" above the table when in the vertical position.The worm ratio is 90 to 1.Flatness of clamping surface: 0.0006" Parallelism of clamping surface to base: 0.0008" Squareness of clamping surface to angle face: 0.0004" Squareness of clamping surface to center slot: 0.0008" Concentricity of center bore: 0.0008"Dividing plates and a tailstock are available for this rotary table.

Rotary Table, 6" Phase II1787

Adapter, 5" Lathe Chuck3942 $74.95Dividing Plate Set for 6" Rotary Table1801 $125.00Rotary Table, 6" with Tailstock & Dividing Plate, Phase II3566 $495.95Tail Stock for 6" Rotary Table, Phase II1802 $125.00

$249.95This horizontal / vertical rotary table is made of precision machined cast iron and has a 2 Morse taper center hole. The table is graduated with a 360° scale. The rotary table is furnished with lock down clamps.The table is 3.70" high when horizontal, and the centerline is 3.86" above the table when in the vertical position.The worm ratio is 72 to 1.Flatness of clamping surface: 0.0008"Parallelism of clamping surface to base: 0.0008"Squareness of clamping surface to angle face: 0.0012"Squareness of clamping surface to center slot: 0.0012"Concentricity of center bore: 0.0008" TIPA dividing plate, tailstock and chuck adapter are available for this rotary table. You can get all four items for a significant savings as our part number 2329.

Rotary Table, 6" Precision2326

Adapter, 5" Lathe Chuck2330 $29.95Dividing Plate Set for 6" Rotary Table2328 $109.95Rotary Table, 6" with Tailstock & Dividing Plate2329 $399.95Tailstock for 6" Rotary Table2327 $109.95

Tooling: Arbors and Sleeves

$12.95This arbor has a soft end which can be machined to suit your purpose.The arbor has a 3 Morse taper shank and is threaded for a 3/8-16 NC drawbar.The machinable end is 1.5" long and 1.5" in diameter.

Arbor, Blank 3MT Drawbar2393

Arbor, Blank 2MT Drawbar2394 $12.95


Tooling: Arbors and Sleeves

The long taper goes in the lathe tailstock or mill spindle.The short taper goes in the drill chuck.The 2MT Stub arbors fit the mini lathe tailstock without cutting.

Arbors, Drill Chuck

Arbor, Drill Chuck 0MT Standard to 2JT3544 $8.95Arbor, Drill Chuck 0MT Standard to 33JT3543 $8.95Arbor, Drill Chuck 1MT Tang to 2JT1778 $6.95Arbor, Drill Chuck 1MT Tang to 33JT1894 $6.95Arbor, Drill Chuck 2MT Drawbar to 2JT1882 $8.95Arbor, Drill Chuck 2MT Drawbar to 33JT1883 $8.95Arbor, Drill Chuck 2MT Drawbar to 3JT3144 $3.95SALEArbor, Drill Chuck 2MT Drawbar to 6JT3143 $2.95SALEArbor, Drill Chuck 2MT Short to 2JT1803 $8.95Arbor, Drill Chuck 2MT Short to 3/8-24 Thread1807 $8.95Arbor, Drill Chuck 2MT Short to 33JT1804 $8.95Arbor, Drill Chuck 2MT Standard to 33JT2955 $8.95Arbor, Drill Chuck 2MT Tang to 2JT1167 $8.95Arbor, Drill Chuck 2MT Tang to 3/8-24 Thread1613 $8.95Arbor, Drill Chuck 2MT Tang to 33JT1190 $8.95Arbor, Drill Chuck 3/8" Straight to 2JT2298 $11.95Arbor, Drill Chuck 3MT Drawbar to 2JT1805 $10.95Arbor, Drill Chuck 3MT Drawbar to 3/8-24 Thread1808 $11.95Arbor, Drill Chuck 3MT Drawbar to 33JT1806 $10.95Arbor, Drill Chuck 3MT Tang to 2JT1191 $10.95Arbor, Drill Chuck 3MT Tang to 3/8-24 Thread1614 $10.95Arbor, Drill Chuck 3MT Tang to 33JT1192 $10.95Arbor, Drill Chuck R8 to 2JT3999 $11.95Arbor, Drill Chuck R8 to 33JT1676 $11.95

$5.95Morse taper sleeve adapts 2 Morse taper tools to 3 Morse taper machines. Hardened and precision ground.

Morse Taper Sleeve 3MT - 2MT1195

Morse Taper Sleeve 2MT - 1MT1193 $5.95Morse Taper Sleeve 3MT - 1MT1194 $5.95

$11.95This sleeve adapts 3 Morse taper tools to R8 spindles.It is hardened and precision ground.

R8 to 3MT Sleeve3671

R8 to 2MT Sleeve2190 $9.95

Tooling: Clamping Kits

$7.95● One piece assembly allows quick set-up● Instant height adjustment● Attached brass covers protect machine table and workpiece● Fits 7/16 and 12 mm T-slots● Clamps work up to 1.75" thick, clamp is 1.25" wide

Clamp, Adjustable2551

$49.9536-piece clamping kitThis clamping kit fits the 6 mm T-slots on the Taig mill, and the 1/4" T-slots on the Sherline mill.The clamping kit includes 10 M5 studs, 4 step block pairs, 6 T-slot nuts (in each of two sizes), 6 flange nuts, and 6 step clamps.There are more parts included than shown in the photo.

Clamping kit, 6 mm T-Slot, 36-Piece2718



$39.9552-piece clamping kit This clamping kit fits the 12 mm T-slots on the mini mill.The clamping kit includes 24 3/8-16 studs, 6 step block pairs, 6 T-slot nuts, 6 flange nuts, 4 coupling nuts, and 6 end hold downs.

Clamping Kit, 7/16" T-Slot1144

Clamping Kit, 1/2" T-Slot1268 $39.95Clamping Kit, 5/8" T-Slot3667 $41.95

$39.9536-piece clamping kitThis clamping kit fits the 8 mm T-slots on the micro mill.The clamping kit includes 10 M6 studs, 4 step block pairs, 6 T-slot nuts, 6 flange nuts, and 6 step clamps.There are more parts included than shown in the photo.

Clamping kit, 8 mm T-Slot, 36-Piece2039

Clamping Kit, 8 mm T-slot, 20-Piece1972 $29.95

$29.95● Two self-adjusting milling clamps 2.7" long and 0.8" wide● Clamp material up to 1.5" thick● Use with 10-32, 1/4-20, M5, or M6 studs● 6061 billet aluminum, hard anodized, laser engraved● Studs and nuts are not included

Clamps, Adjustable 2.7" x 0.8"3642

Clamp, Adjustable 4.1" x 1.2"3805 $19.95Clamp, Adjustable 5.5" x 1.2"3806 $21.95Clamps, Adjustable 1.7" x 0.65"3808 $27.95Clamps, Adjustable 2.3" x 0.65"3809 $28.95Clamps, Adjustable 3.7" x 0.8"3802 $31.95Studs, 10-32 with Spherical Nuts & Washers3803 $9.95

$59.95● Cam action clamps have large holding force● Fits 7/16" wide T-slot● Six clamp assemblies including clamps, bolts, and T-slot nuts● Similar to the Mitee Bite system● Includes metal container for storage

Clamps, Low Profile Cam Action 7/16"3756

Clamps, Low Profile Cam Action 1/2"3757 $59.95Clamps, Low Profile Cam Action 8 mm3758 $59.95

T-slot nuts are used on mill tables and rotary tables.They are heat treated and have a black oxide finish.The size of a T-slot nut is the width of the top of the T-slot.

T-Slot and Flange Nuts

Flange Nut, 3/8"-163150 $3.95Flange Nut, 3/8"-162253 $1.29T-Slot Nut (1/2")2021 $1.49T-Slot Nut (1/4")3097 $1.95T-Slot Nut (10 mm)2991 $3.55T-Slot Nut (12 mm)1418 $3.55T-Slot Nut (6 mm)2059 $1.49T-Slot Nut (7/16")1269 $1.49T-Slot Nut (8 mm)2058 $1.95

$17.95● Four T-slot nuts for 6 mm T-slots● Four studs of two different lengths● Two flange nuts● Two step clamps● Two step blocksThis set of T-slot nuts and clamping bars fits our 4" H/V rotary table (PN 1927) and the Phase II 4" rotary table (PN 1727). This kit also fits Taig mills.

T-Slot Nuts (6 mm) and Clamping Bars1943



$14.95● Two T-slot nuts for 8 mm T-slots● Two studs● Two flange nuts● Two step clamps● Two step blocksThis set of T-slot nuts and clamping bars fits our 4" precision rotary table (PN 1810). It also fits the Harbor Freight micro mill.


$24.95● Two T-slot nuts for 8 mm T-slots● Two studs● Two flange nuts● Two step clamps● Two step blocksThis set of T-slot nuts and clamping bars fits our 4" precision rotary table (PN 1810). It also fits the Harbor Freight micro mill.


Tooling: Drill Chucks

$24.95● 0.6 to 6 mm (0.024" to 0.24") capacity● M14x1.0 mounting thread● Fits Unimat 3 & 4 lathes● Fits SIEG C0 lathes● Includes chuck key

Drill Chuck 6 mm for Unimat 3 & 4, SIEG C0 Lathes2951

$9.950-1/2" Capacity drill chuck. All working parts are hardened. Chuck key is included. Number 33 Jacobs taper mount.Runout of this chuck is 0.008" (0.20 mm) or less.

Drill Chuck, 1/2"1212

Drill Chuck, 3/8"1213 $8.50

$32.951/2" capacity keyless drill chuck.No chuck key is required with this self-tightening design. The chuck is made from hardened tool steel to ensure accuracy and extended life.The rated capacity is 1/32" to 1/2". Number 33 Jacobs taper mount.

Drill Chuck, 1/2" Keyless1660

Drill Chuck, 3/8" Keyless1659 $26.95

$29.95● 1/32-1/2" Capacity professional quality drill chuck. ● Runout 0.004" (0.10 mm) or less.All working parts are hardened. Chuck key is included. Number 33 Jacobs taper mount.This chuck is comparable to a Jacobs 34-33 heavy duty drill chuck, including the runout specification of 0.004" (0.10 mm) or less.

Drill Chuck, 1/2" Professional Grade3153

$29.95● 1/2" capacity drill chuck● Mounted on a short 2 Morse taper shank for the mini lathe● Fits Jet 1014 mini wood latheThis chuck is specifically designed for the mini lathe tailstock.The rated capacity of this chuck is 1 mm (0.039") to 13 mm (0.512").

Drill Chuck, 1/2" with 2MT Short Arbor1148


Tooling: Drill Chucks

$30.95● 1/2" capacity drill chuck● Mounted on a 2 Morse taper shank● For small lathe tailstockThis chuck has a standard length 2 Morse taper arbor and will eject from most lathes with a 2MT tailstock taper.The rated capacity of this chuck is 1 mm (0.039") to 13 mm (0.512").

Drill Chuck, 1/2" with 2MT Standard Arbor2870

$32.951/2" JT33 Chuck and R8 Shank. Fits mini mills with the R8 spindle.

Drill Chuck, 1/2" with R8 Shank1396

$99.95● Fingertip control for drilling small holes● Helps prevent drill breakage● 0JT taper, 1/2" straight shank, 3/4" travel● 1/8" ( 3 mm) capacity keyless drill chuckTo use the sensitive drill feed, grasp the knurled ring and pull it down to feed the drill into the workpiece. The internal spring retracts the drill when the ring is released.No chuck key is required with this self-tightening design. The chuck is made from hardened tool steel to ensure accuracy and extended life.The rated capacity is of the drill chuck is 0 to 3 mm. It has a number 0 Jacobs taper mount and 0.002" (0.05 mm) maximum runout.

Sensitive Drill Feed and 1/8" (3 mm) Keyless Drill Chuck3790

Sensitive Drill Feed3665 $49.95

Tools & Things: Abrasives

$0.19● Aluminum oxide abrasive● High grade resin-boinded on J-weight cotton cloth backing● Flexible for contour workThe price is for one foot. Order as many feet as you want and we will cut it to that length. Maximum length is 150 feet.Use for cleaning and deburring metal surfaces. Can be used with water or oil.

Abrasive Cloth, 1" Wide 240 Grit3890

Abrasive Cloth, 1" Wide 320 Grit3891 $0.19Abrasive Cloth, 1" Wide 400 Grit3892 $0.19Abrasive Cloth, 1" Wide 600 Grit3893 $0.19

$0.49● 9" x 12" Sheet● Silicon carbide abrasive for efficient cutting● Resistant to oil and waterUse this sandpaper with a lubricant (water or very light oil) to reduce clogging, extend the life, and improve the finish.

Abrasive Sheet, Wet or Dry 240 Grit3886

Abrasive Sheet, Wet or Dry 320 Grit3887 $0.49Abrasive Sheet, Wet or Dry 400 Grit3888 $0.49Abrasive Sheet, Wet or Dry 600 Grit3889 $0.49


Tools & Things: Adhesives

Tools & Things: Adhesives

$5.95● Cold-weld compound● Can be formed, drilled, ground, tapped, machined, filled, sanded, and painted● Super strong, non-toxic, and safe to useDon't scrap that damaged item that nothing else can fix! J-B WELD is an incredibly versatile product that can repair everything from damaged welds and solders to a precious heirloom. Save money, save time, and save your sanity for drastically less money than other forms of permanent repair.J-B WELD is the world's finest cold-weld compound. It's a remarkably easy, convenient, and inexpensive alternative to welding, soldering, and brazing. J-B WELD is the smart way to repair something ... and for literally pennies per use. When welding or soldering is out of the question due to cost, down time for repairs, or technical/environmental considerations, J-B WELD is the answer. J-B WELD is packaged in two tubes. One contains liquid steel/epoxy resin, and the other contains hardener. When mixed together in equal portions, a chemical reaction occurs that turns the mixture into a compound as hard and tough as steel -- and with similar properties.

J-B Weld3978

Visit our Web site for full information about these Locktite products.Locktite Products

Loctite 222 Purple Low Strenght Threadlocker for Small Fasteners3986 $12.95Loctite 242 Medium Strength Blue Threadlocker3987 $12.95Loctite 271 High Strength Red Threadlocker3988 $12.95Loctite 7649 Primer for Threadlockers3989 $10.95

Tools & Things: Apparel

$15.95We had these aprons custom-made to our design out of heavy-duty denim. The swinging top pocket ensures that valuable items such as a micrometer or your glasses do not fall out when you bend over.The large left pocket is just the right size for a 6" dial or digital caliper. The Velcro on the flap ensures that it is protected.

Shop Apron2185

Tools & Things: Coolants & Lubricants

$15.95● For high speed spindle bearings, ways, and gear boxes● Imparts a unique load carrying film, exceptional lubricity, and anti-friction properties● 1 Quart (2 pound) containerLubriplate No. 3-V is a 20 weight oil especially designed for combination machine tool way lubrication and bearing lubrication. Excellent for ring oiled bearings, oil cups, circulating systems and Servo Controlled Machine Tools. This oil meets the majority of machine tool manufacturers' recommendations for general machine oil type lubrication. It contains a tackiness additive.Lubriplate fluid products are specially compounded for a wide variety of industrial uses. Lubriplate fluids' performance and economy greatly exceed that of conventional oils. They impart a unique load carrying film, exceptional lubricity and anti-friction properties not found in conventional oils of the same viscosity. The high-wetting nature of these lubricants provides a superior protective coating of the metals.

Lubriplate 3-V Machine Tool Oil3994

$8.95● Lithium-based grease for general purpose lubrication● High anti-wear for extra lubricity● Water resistant● Wide operating temperature rangeThis is the grease we recommend for small machine tools. It is great for many other applications as well.

Lubriplate 630-AA Lithium Grease3984


Tools & Things: Coolants & Lubricants

$6.95● Starrett M1 all-purpose lubricant in 12 oz. Aerosol can● Must be shipped by ground; not available outside the continental USM1® is the "modern one" - the superior alternative. It dries and will not attract dirt or other contaminants as other leading lubricants do.Simultaneously dries as it protects, avoiding dirt and grime. Dries to leave a film that protects and lubricates. Lubricates without silicone. Penetrates to quickly to free frozen nuts, bolts and metal parts. Prevents rust and corrosion damage by providing a molecular shield that locks to the metal. Non-soluble in water so it displaces moisture to lift it away from the surface to be protected. Nonconductive, preventing short circuits.Applications for industry are nearly endless. Protect working surfaces of machinery; use in dip tanks to protect production parts in process, or apply on tools when stored. M1 is also ideal in highly corrosive situations that destroy metal equipment used in marine environments.

SALE!M1 Lubricant, 12 oz Aerosol Can, Starrett3195

M1 Lubricant, Case of 12 Aerosol Cans, Starrett3179 $69.95SALE

$6.50● Starrett catalog number 1620This oil is the same extra-fine lubricant made to Starrett specifications and used in the Starrett factory to lubricate and protect their precision measuring tools and instruments. It is also perfect for all mechanics, homeowners, hobbyists, and sportsmen who require the finest all-purpose oil. Special high-refining makes Starrett Tool and Instrument Oil colorless, ensures thorough lubrication of close-fitting parts at high temperatures and below zero, and provides a strong lasting film over all areas requiring protection against rust. This oil has not been adulterated by additives for color and odor.

Tool and Instrument Oil, Starrett1825

Tools & Things: Gift Certificates

$100.00LittleMachineShop.com gift certificates make great gifts. Now you know exactly what to give, and you don't need to worry about whether or not it fits.

Gift Certificate, $1001675

Gift Certificate, $251673 $25.00Gift Certificate, $501674 $50.00

Tools & Things: Lights

$19.95● Powerful magnetic base with On/Off switch● Flexible arm for easy positioning● 120 VAC power● Use standard 60 W incandescent medium base bulb (not included)

Machine Light With Magnetic Base3682

$42.95● Flexible gooseneck allows easy positioning● Magnet and screw mount provided● Six foot 3-prong power cord for 120VAC operation● Small 3" diameter head won't get in the way● 35 watt halogen bulb produces intense lightThis lamp has a flexible gooseneck so you can mount it behind your machine and bend the light to where you need it. The lamp is 24" overall.You can simply set it on a steel surface, or you can screw it down with the tabs provided. There is an M8 threaded hole in the bottom if you want to make your own mounting bracket instead of using the one provided.120V AC power.

Machine Light, Gooseneck2618

Halogen Bulb2619 $11.95

$39.95● 35 watt halogen bulb produces intense light● 20" flexible shaft● Powerful magnetic base with ON/OFF switch● 3-prong power cord for 120VAC operation

Machine Light, Halogen With Magnetic Base3715

Halogen Bulb3799 $9.95


Tools & Things: Lights

$59.95This circular fluorescent light, made for a microscope, fits around the spindle on a mini mill.It provides good, even light on your work.The hole in the light is 1.85" in diameter. It fits the mini mill fine, but if you have a different mill you had better check to be sure it will fit.

Spindle Light, Mini Mill3015

Tools & Things: Things

$69.95The Machinist Calc Pro is the first dedicated handheld machining math and reference tool to provide a complete assortment of machine shop solutions. It has more complete Thread data than the Machinery's Handbook, including step-saving Thread and Drill Size chart look-ups, speeds and feeds, right triangle solutions, bolt patterns and much more.Spend more time machining and less time looking up specs and data in books, on charts or in computer programs

Machinist Calc Pro Machinist's Calculator4087

$2.95● Clear lenses● Black framesAlways wear safety glasses when working in your shop.

Safety Glasses3855

$4.95● Avoid workbench spills● Holds cutting fluids and lubricants● Won't spill, even when upside down● Durable polyethlene for long life● Includes applicator brush

SpillMaster Container3896

Tools & Things: Threading Tools

$99.95● Assures straight tapped holes● Helps prevent broken taps● 9 tap adapters included● Spindle is balanced for sensitive feel● Sliding vise jaws keep work from slippingThis rigid hand tapper helps prevent broken taps while tapping straight holes.Precision ground work table and spindle ensure accuracy.Tap adapters for #6, #8, #10, 1/4", 5/16", 3/8", 7/16" 1/2" and 5/8" taps. (Not recommended for taps smaller than #6.)The work area is 6.5" x 10". The clearance height is 7" and the throat depth is 7.5" The overall height is 13".Includes an offset handle and a rack for the tap adapters.

Hand Tapper2539

$44.95● Assures straight tapped holes● Helps prevent broken taps● 7 tap adapters includedThis rigid hand tapper helps prevent broken taps while tapping straight holes.Precision ground work table and spindle ensure accuracy.Tap adapters for #0 through 5/16" taps.The tableis 8.5" x 6". The clearance height is 3.75" and the throat depth is 4.5" The overall height is 9".

Hand Tapper, Mini2898

Tap Adapters, Set of 72900 $11.95



$22.95● Jaws adjust to tightly secure taps● Fits all 3/8" square drive wrenches● Small adapter fits taps for #0 to 1/4" thread● Large adapter fits taps for 1/4" to 1/2" threadFor use in tight workspaces or for putting some muscle on those hard-to-turn large taps. Designed for use with taps, reamers, screw extractors and other tools with a square shank.Not recommended for cutting new threads.

Tap Adapters, 3/8" Socket Drive3602

$9.95● Provides sensitive feel for tapping small holes on lathes● Assures straight threads● Helps prevent breaking taps● 3/8" diameter shank, 1" diameter handle● Holds #0 through #12 tapsThis tapping guide is used to facilitate power tapping with a lathe. Put the tap in the chuck on the tapping guide and put the extension rod into the lathe's tailstock drill chuck.Then, as you tap the hole, the handle and chuck are free to move away from the lathe's drill chuck. Simply release your grip when the tap reaches the correct depth.The tap guide is 6.5" in overall length.

Tap Guide, Machine2901

$6.95● Offset handle adjustable tap & reamer wrench● Straight handle design provides greater leverage, especially when using larger diameter tapes

Tap Handle, Adjustable3603

$20.50● Starrett catalog number 174This is a well-designed tap wrench, ideal for holding smaller diameter taps, drills, reamers, and other tools up to 1/4" (6.35 mm) in diameter. It works with 0-14 tap sizes.It will firmly grip round or square shanks, is lightweight and well proportioned. The gripping surface is properly heat treated to withstand any ordinary use.

Tap Wrench, Starrett2621

Tap Wrench 6" Starrett3177 $41.00

$10.95● For #0 to #6 taps● For M1.6 to M3.5 taps● Fits 0.110" driving square● Light weight tool maximizes "feel" while tapping● Set of two tap wrenchesThese miniature tap wrenches are perfect for very small taps. They let you actually feel the threads being cut, and you can easily feel the tap tighten up when it is time to reverse and break the chips.The longer tap wrench is 2.5" long. The shorter one is 1.5" long. They are brightly anodized so you won't lose them.

Tap Wrenches, Miniature3654



$39.95● Starts taps straight - reduces breakage● Fits taps from 0-80 to 3/8-16● Elegant designOver 90% of broken taps are the result of the tap not starting straight in the hole, yet most people tapping by hand simply "eyeball" their tap into a hole and then are amazed when the tap snaps in a valuable part! The OMW Tapping Block was inspired by a block used nearly every day by a master tool and die maker I had the pleasure of working with in my shop. He used his block whenever tapping a hole, and I never saw him break a tap! Simply hold the tapping block flat against your work, above the hole you've tap drilled. Place your tap through the appropriately sized guide hole and you are assured of perfect tap alignment when starting your thread. The OMW Tapping Block is manufactured of the highest quality 4140 steel. It is beautifully designed, expertly knurled and chamfered for easy grip, with counterbored holes to allow for material chip clearance when tapping. Fits all common taps from 0-80 thread to 3/8-16 (the seven holes fit tap shanks of #0-#6, #8, #10, #12, 1/4, 5/16, and 3/8). This Tapping Block should be in the tool chest of every machinist, from beginner to expert.

Tapping Block, OMW2571

Tapping Block, OMW Metric2854 $39.95

$29.50● Starrett T-handle tap wrench● Starrett catalog number 93A● For holding taps, drills, reamers, and other small tools to be turned by hand● Fits machine screw taps from #0 to #10● Fits fractional thread taps from 1/16" to 3/16"The body of this T-hadle tap wrench is centered, enabling the worker to use it on lathe centers or on an upright drilling machine to start the tap straight. The jaws conform to the tool being held, making it rigid and less apt to loosen. They are properly heat treated to withstand ordinary shop use.The wrenche has a sliding handle that is frictionally held. This feature permits the handle to be removed entirely or positioned so that leverage can be applied when working in close quarters.These tools are designed to hold square shanks. Round shanks can be gripped, but care must be used. Excessive tightening may break the binding nut.

T-Handle Tap Wrench for #0 to #10 Taps, Starrett3434

T-Handle Tap Wrench for 1/4-1/2" Taps, Starrett3555 $40.50T-Handle Tap Wrench for 7/32-7/16" Taps, Starrett3554 $31.50

$7.00● For hand tapping and driving screw extractors● Fits machine screw taps from #0 to #8● Fits fractional thread taps from 1/16" to 5/53"For holding taps, reamers, and other small tools to be turned by hand.

T-Handle Tap Wrench for #0 to #8 taps2852

T-Handle Tap Wrench for #8 to 1/4" taps2853 $7.50

$39.90● Both inch and metric threads, plus a free hat● Eliminate tap breakage due to improper alignment● Automatically squares up the tap with the surface● 90 degree V-groove along the bottom allows perpendicular alignment on round parts or corners● Portable, pocket size. Protective plastic storage tube is includedV-TapGuide™ by Big Gator Tools™ is made of a special alloyed steel that is ground and heat treated for durability. The guide holes are smooth, unlike drilled or reamed holes. Guide holes are sized for ANSI standard ground taps. The standard inch V-TapGuide can handle tap sizes of 0-80, 1-64, 1-72, 2-56, 2-64, 3-48, 3-56, 4-36, 4-40, 4-48, 5-40, 5-44, 6-32, 6-36, 6-40, 8-32, 8-36, 8-40, 10-24, 10-32, ¼-20, ¼-28, 5/16-18, 5/16-24, 3/8-16, 3/8-24, 7/16-14, 7/16-20, ½-13, ½-20, 5/8-11, and 5/8-18.The metric V-TapGuide can handle tap sizes of 1.6mm, 2mm, 2.5mm, 3mm, 3.5mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm, 14mm, and 16mm.

V-TapGuide Hand Tap Guide Set, Inch, Metric & Free Hat3866

Hat, Big Gator Tools3865 $9.95V-TapGuide Hand Tap Guide for Inch Threads3427 $19.95V-TapGuide Hand Tap Guide for Metric Threads3428 $19.95


Tools & Things: Tools


$37.95● Heavy duty frame● Four position anvil● Steel pinion● Maximum work height 4.25"● Maximum work diameter 6.5"

Arbor Press, 1/2-Ton3681

$30.50Starrett Automatic Center Punch with adjustable stroke.Starrett catalog number 818.This punch has a lightweight, knurled aluminum handle for a positive grip and easy handling. No hammer is required! Just hold the punch in an upright position, press the handle down, and a built-in mechanism strikes a perfect center mark every time. The force of the blow can be adjusted by turning the knurled cap.All working parts are made of tool steel, properly hardened. The hardened tool steel point can easily be removed for resharpening or replacement. Works on metal, plastics, wood and other machinable materials.

Automatic Center Punch, Starrett2620

$34.50● Starrett Automatic Center Punch with adjustable stroke● Starrett catalog number 18ARugged automatic punches have all-steel handles and parts. These punches have a mechanism that automatically strikes a blow when downward pressure is applied. No hammer is required, making one hand always free to steady the work.The adjustable knurled cap regulates the force of the blow. Should a heavy mark be required, the cap is screwed down. Progressively lighter marks are obtained by turning the cap upward. The tension of the spring, which regulates the blow is constant, so marks made by the point are uniform in depth and size for each setting. The point can be easily removed for regrinding and/or replacement. All sizes are identical in style, differing only in the striking power.

Automatic Center Punch, Starrett3553

$24.95● Made from steel; hardened and ground● Handy tool for holding work, driving pins, drilling and so on● Knurled edge provides a good grip● V-groove accomodiates round and odd-shaped objects● Holes from 1/8" to 5/8" diameterThis bench block is 3" in diameter and 1.5" thick.

Bench Block3189

$32.00Starrett Center Punches with round shanks. Set of 5, Nos. 117AA, A, B, C, D in Plastic CaseStarrett catalog number S117PC.This set includes the following sizes, measured at the top of the tapered point: 1/16”, 5/64”, 3/32”, 1/8”, and 5/32” diameter.Starrett No. 117 Center Punches are made of specially selected steel, hardened and properly tempered. They are well proportioned, nicely finished and have a knurled finger grip. The points are ground at the proper angle to give maximum service, and the tips are accurately centered.These punches are universally used, but most often by machinists. They are well-proportioned for ease of use. The specially selected tool steel is hardened and tempered to the proper hardness. All of them feature nicely knurled finger grips for ease of handling. A special tempering process makes the head less likely to fracture from a hard, off-center blow. ALWAYS WEAR SAFETY GLASSES WHEN USING STRIKING AND STRUCK TOOLS.

Center Punches, Starrett1820

$0.79● Natural bristles● Wood handleThe brushes are great for clearing chips as well as for small painting jobs were you don't want to take the time to clean a brush.

Chip Brush, 1"3979

Chip Brushs, 1" wide, 36 Pieces3981 $18.95Chip Brushs, 1" wide, 6 Pieces3980 $2.95



$275.95● Work 12" wide steel up to 22 gage● Brake has sectional fingers for forming boxes● 1.5" Diameter ground slip rolls with six rod and wire forming grooves● Back gage assists in shearing to close tolerancesThis combination shear, break and slip roll provides a lot of capability in a small package.Grooves in the slip rolls fit 3/32", 1/8", 5/32", 3/16", 7/32", and 1/4" wire and rod.

Combination 12" Shear, Brake, & Roll3685

$2.99This deburring tool has a built-in E-100 blade.It deburs holes with a flick of the wrist.

Deburring tool1671

$39.50● Set of 5 extra long 8" pin punches● Includes 1/8", 3/16", 1/4", 5/16", and 3/8" punches● Well proportioned, hardened, proper tempered with a knurled grip● Incluides vinyl case● Starrett catalog number S248PCStarrett No. 248 Drive Pin Punches are extra-long, measuring 8" (200mm). The bodies are 4-1/2" (115mm) and the drive pin sections are 3-1/2" (90mm) long. They are well-proportioned, hardened, properly tempered, and have a knurled grip. They are designed to withstand hard use and provide a most satisfactory punch for machine shop and motor service work. Just the punch to follow long cotter pins and the like into holes without hindrance. The diameters of the punches are slightly under the sizes listed.

Drive Pin Punches, Extra Long, Starrett3884

$49.00Starrett 8 piece drive pin punch set. Set of 8, Nos. 565A/B/C/D/E/F/G/H in a round wood boxStarrett catalog number S565WB.This set includes the following diameter punches: 1/16”, 3/32”, 1/8”, 5/32”, 3/16”, 7/32”, 1/4”, 5/16”.Starrett No. 565 Drive Pin Punches are well proportioned, hardened, properly tempered, nicely finished, and have a knurled finger grip. Each punch has the size stamped on the head. These punches are universally used, but most often by machinists. They are well-proportioned for ease of use. The specially selected tool steel is hardened and tempered to the proper hardness. All of them feature nicely knurled finger grips for ease of handling. A special tempering process makes the head less likely to fracture from a hard, off-center blow. ALWAYS WEAR SAFETY GLASSES WHEN USING STRIKING AND STRUCK TOOLS

Drive Pin Punches, Starrett1821

$134.95● Ball bearing spindle of ground steel, with lock button for rapid cutter changing● Streamlined die-cast aluminum head for exact bearing seats and optimal stability● Powerful 100 W motor with full-wave electronics for variable speeds between 5,000 and 20,000 rpm● Complete with six triple-slit steel collets covering 1/32'' to 1/8'' (1.0 - 3.2 mm)● Two year limited warrantyGrinder with 34 industrial quality bits & cutters with shanks Ø 3/32'' (2.3 mm). High concentricity (maximum run out .001'').This high-revving motor is usable for extended periods at a time. 120V AC, 60 HzThe ground steel spindle runs in a ball bearing assembly, minimizing play. Six high concentricity collets sized 1/32'', 1/16'', 5/64'', 3/32'', 7/64'' and 1/8'' (1.0, 1.5, 2.0, 2.4, 3.0 and 3.2 mm) along with a collet nut are included.Packed in durable plastic case, complete with the 34 bits & cutters as shown above.

Grinder, Proxxon IB/E Professional Rotary Tool2891

Accessory Kit, Modelmakers for Rotary Tools3634 $19.80Cut-Off Disks (50), Aluminum Oxide for Rotary Tools2969 $12.80Grinder, Proxxon IB/E Professional Rotary Tool 240VAC3033 $129.95Grinding Wheels (10), Aluminum Oxide for Rotary Tools2967 $6.75Grinding Wheels (10), Silicon Carbide for Rotary Tools2968 $6.75Wire Brushes (5), Brass for Rotary Tools3635 $10.95



$24.95● Starrett Closed Grip Heavy Duty High-Tension Hacksaw Frame● Starrett catalog number K153● 12" (300mm) frame● 4-3/8" (110mm) throat depthThe K153 is a rugged, professional quality high-tension frame constructed of cast aluminum with an extra-thick tubular steel bar for added strength. The steel tube also provides on-hand storage for spare blades.The K153 High-Tension Frame is engineered for use with Starrett bi-metal Bluestripe® and Greenstripe® blades.

With just three 360° turns, the easy to use adjusting screw will tension the blade up to 28,000 psi (2,000kg/cm) which prevents the blade from twisting and binding when bearing down on the cut. Each K153 Heavy Duty High-Tension Frame is shipped with a Starrett Bluestripe bi-metal unique ground tooth hacksaw blade.

Hacksaw Frame, Starrett Heavy Duty3562

Hacksaw Blade, Bi-Metal, 14 TPI, Starrett1849 $1.62

$19.00● Special tapered collet, provides maximum clamping surface● Smaller body diameter than the chuck to allow fast opening and closing and rapid rotation● Provides rapid rotation between the thumb and finger when used on small work● Starrett Catalog Number 240AStarrett pin vises are useful for securely holding small stock, taps, drills, reamers, scribers, wire, small files, and other tools. The jaws on all are hardened and with a few turns of the binding nut, a firm grip may be obtained. Handles and binding nuts are nickel-plated except for the No. 166 Series.A hole extends through the full length of the handles so that wires of any length and any diameter up to the full size of the tool can be held.

Pin Vise, 0.010" - 0.055" (0.25 - 1.4mm) Starrett3881

Pin Vise, 0.025 - 0.075” (0.64 - 1.9mm) Starrett3882 $22.50Pin Vise, 0.045 - 0.135” (1.2 - 3.4mm) Starrett3883 $24.50

$25.00● Starrett 3.5" pocket level● Starrett catalog number 135B● 3.5" (88 mm) long● Satin nickel plated finishThis is an extremely useful Starrett level that fits handily in the pocket with no sharp edges. Made from hexagonal stock with convex ends and satin nickel-plated finish.

Pocket Level, Starrett3560

$50.00● Set of 7 Starrett precision jewlers' screwdrivers in a case● Starret catalog number S551Z-7● Set of 7 screwdrivers in a case● Durable hardened chrome-vanadium blade/contactsThe Starrett No. 551 Screwdrivers with soft-touch handle are lightweight and have a very ergonomic design, making them easy to work with.Yet the No. 551 is a rugged product. The blade/contacts are made of chrome-vanadium, molybdenum steel, hardened and chrome-plated, allowing them to hold up well in the toughest applications.Soft-touch handles are tapered and proportioned to blade for rapid rotation and spin-free finger control cap provides precise turning and controlFlat Blade widths are: .060"/1.5mm, .080"/2.0mm, .100"/2.5mm, .120"/3.0mmThree Phillips blades: #00, #0, and #1The precision-machined tips are top quality for an exact fit.

Precision Screwdriver Set, Starrett3178


Tools & Things: X-Y Tables

Tools & Things: X-Y Tables

$132.95This small precision X-Y table can be used on a drill press or other machine to precisely locate your workpiece.The table is 90 mm (3.54") by 200 mm (7.87"). It has three 8 mm T-slots.The complete X-Y Table assembly is 10.15" wide, 8.5" deep and 2.5" high.The X-axis travel is 135 mm (5.31") and the Y-axis travel is 70 mm (2.76").The height of the table is 60 mm (2.36").The base is 100 mm (3.94") by 175 mm (6.89").The dials are graduated in 0.001" and one turn of the hand wheels moves the table 0.050".The X-Y table is made of cast iron and steel. There are adjustable gibs on both axes.

X-Y Table Assembly2008

Videos and Books: Books

Visit our Web site for a full description of these titles.Books for Machinists

Automated Machines and Toolmaking3128 $19.99Basic Machining Reference Handbook1735 $42.95CNC Machining Handbook4002 $58.95CNC Programming Handbook, Third Edition4003 $74.95Home Machinist's Handbook3402 $19.95How to Run a Lathe1596 $7.95Machine Shop Basics3129 $19.99Machine Shop Essentials: Questions & Answers2465 $44.95Machine Shop Know-How3867 $49.95Machine Shop Methods2238 $18.95Machine Shop Practice Vol 11738 $29.95Machine Shop Practice Vol 21739 $29.95Machine Shop Projects1597 $11.95Machine Shop Tools and Operations3130 $19.99Machine Shop Trade Secrets2366 $41.95Machine Shop Training Course Vol 11736 $24.95Machine Shop Training Course Vol 21737 $24.95Machinery's Handbook Pocket Companion1788 $21.95Machinery's Handbook, 28th Edition, CD-ROM1743 $94.95Machinery's Handbook, 28th Toolbox Edition 1744 $94.95Mathematics At Work1740 $29.95Metalworking Sink or Swim3565 $44.95Milling Machine Operations1600 $9.95Mini Lathe Users Guide2247 $5.95Mini Mill Users Guide2706 $5.95Modern Machine-Shop Practice (CD-ROM)1522 $5.95Running a Milling Machine1598 $9.95Running An Engine Lathe1594 $6.95Shop Reference for Students & Apprentices1953 $26.95South Bend Lathe Booklets1599 $7.95The Care and Operation of a Lathe1595 $7.50Tools & Rules for Precision Measuring3110 $1.95


Videos and Books: Videos


$43.00This DVD video, by Jose Rodriguez, provides a four hour introduction to the use of the mini lathe.The DVD has a menu that makes it easy to return to parts of the video that you want to see again.Jose says: "This one has been a hot topic in recent months on the Net, the various metalworking newsgroups and mailing lists. Now all of your questions, doubts and anything else you may have been wandering about this tool will be answered in a four hour, no holds barred video presentation. The tape will begin with a full tour of the tool, followed by a complete machining presentation that should put to rest any fears or reservations you may have had about this tool once and for all!!! Not only will you be shown just about every basic machining cut a lathe is able to do, you will also see a complete "milling on the lathe " demonstration adapting the Taig vertical milling slide to the mini lathe's cross slide. An extremely informative presentation that will also double as a perfect machining mini-course."

DVD: 7x10 Variable Speed Mini Lathe Operations2007

$43.00This video, by Jose Rodriguez, provides a four hour lesson on advanced use of the Taig Micro Lathe.Jose says: "See the Taig Micro Lathe perform some of the most unorthodox machining techniques most thought were impossible. Learn how to make 60-50-40 hole indexing plates and how to use it of the Taig. Get that tail stock set to within a few tenth in a couple of minutes with a simple shop made test bar and TDI. See a heavy-duty motorized cross slide drill rig that will perform any radial drilling as well as milling job. See a 50 division graduated dial being engraved with the use of a simple device. Turn the Taig into a miniature 3 in 1 machining center. Would you like a graduated carriage lead screw for your Taig? After viewing this video tape set, you will be able to make one in one evening. Learn to make and use several flex shaft milling and grinding units for both the cross slide and the vertical milling attached. How about auto feed for the carriage and cross slide! These are just some of the fun subjects that will be covered in this new and unique production."

DVD: Advanced Taig Micro Lathe Operations2566

$33.00This video, by Jose Rodriguez, provides a two hour introduction to the use of the Taig Micro Lathe.Jose says: "Would you like to be able to see for yourself what can be done on a Taig Micro Lathe with just minimal tooling and expense? Are you somewhat undecided about acquiring one of these small but very capable tools and somehow wished you could just see one being put through its paces before opening your wallet? Well, wait no more! Finally there is a video that will answer most of your basic questions about this lathe.Initial setup hints will be discussed, during a thorough tour of the lathe and its basic components.This will be followed with a complete hands-on demonstration of all the basic machining operations possible on this tool. These will include facing, Turning, Grooving, cut-off or parting cuts, chamfering, center drilling, drilling, reaming, tapping, thread cutting with a die, boring cuts, milling, and much more!"

DVD: Basic Taig Micro Lathe Operations2564



$70.00This DVD, by Jose Rodriguez, provides complete instructions for building a milling machine.Jose says: "In this nearly 12 hour long video marathon, you will witness the seemingly impossible! Observe the author as he builds a fully operating and capable 80 pound variable speed milling machine with existing TAIG Micro lathe components and readily available stock aluminum material. A commercial heavy duty X & Y milling table is utilized to complete the project. This is definitively not a "TOY" but a complete milling center that will outperform just about anything in its class. For a total expenditure of less than $300. You too could have a tool that will perform better than milling machines costing more than twice as much. This video will take you through every step from its initial conception and planning to and beyond its very successful conclusion in painstaking detail so that you too will be able to easily duplicate this achievement! As an extra bonus, you will be treated to a fully narrative and visual step by step presentation on the building of a 60:1 geared dividing head that with the addition of a simple shop made indexing accessory will allow it to divide anything into as many as 21,600 equal divisions and for that matter, any other number divisible into that. You will also learn how to easily cut perfectly fitting dovetailed sliding joints with the simplest of equipment. These two items alone would be worth the price of this video set. See how to produce a professional quality engraved dial with nothing more than a small lathe ( TAIG ). You will see each component being worked, fitted and assembled as the unit is magically transformed more and more into a "REAL" milling machine. The final two hours or so will be devoted to a full battery of milling operations performed on real components that make up part of the geared dividing head including other milling goodies. During the filming of the final milling tests, cuts were routinely taken on 6061-T6 alloy to depths of over 90 thou with a common imported 1/4" diameter four flute end mill. We do not recommend that you routinely cut to those depths but it sure is nice to be able to so when needed. This a definite "MUST" for anyone who has grown tired of using alternative milling methods but either is not ready to invest the big bucks for a commercially available bench top milling machine or simply not satisfied with what’s presently available out there.

DVD: Build a Milling Machine2365

$19.95● Build a horizontal steam engine● Video instructions and complete plans on the DVDThe engine is approximately 13” long. The bore is 7/8”, throw is 1 ½” and the flywheel is 5 ½” in diameter. It is constructed from cast iron, brass, hot and cold rolled steel. The majority of the parts are made of cast iron and although a lot of dust is created it’s a wonderful material to work with. For those of you without a DRO, included is a scale paper diagram of the parts that requires bolt hole circles to use as templates.Chapters include: Intro, Crank, Rear end cap, Front end cap, Bolt holes, Chest platform, Soldering cylinder, Valve nut, Clevis, Cylinder complete, Conrod, Bearing support, Crank bearings, Crosshead, Crosshead Guides, Cylinder standoff, Eccentric, Eccentric strap, Flywheel, Timing, Running on air, Running on steam, Conclusion.

DVD: Building a Horizontal Steam Engine4077

$33.00This video, by Jose Rodriguez, provides a 2 hour study on how to build a spindle gauge to check the size of adapters and other accessories you make to fit the spindle of your lathe.Jose says: "Make all the spindle accessories you will need for your lathe with a simple, easy to make spindle gauge. This tape will take you through a full two hour, detailed demonstration on how to make a precision spindle gauge directly on your 7 x 10 that you can then use to machine matching spindle tooling not presently available for this lathe. All this without having to remove the chuck! You will need to remove it only once in the beginning to take two initial micrometer measurements for the diameter and thickness of the mounting back plate / flange. The author has adapted a four jaw chuck for it, has made a slotted face plate, a driving catch plate and dog clamp and is presently working on a collet chuck with frontal collet closer that will directly mount to the spindle. A must have for those wishing they could have more spindle tooling than just the three jaw chuck the lathe comes equipped with!"

DVD: Building a Spindle Gauge for the Mini Lathe2193



$19.95● Build a propane fired vertical boiler● Boiler is 3.13" in diameter and 12.5" tallThis video shows you how to make a propane fired vertical boiler. The boiler size is suitable to power engines that are sold on this site and also an engine such as the Stuart 10H. There are many helpful tips that will help the first time boiler maker construct a safe and sound boiler. You will also see the many jigs built to ease the building process. Some are not necessary, but with all the jigs, the construction of a second boiler will be much easier and faster.The video covers: Caution page, Introduction clip, Trimming and drilling the 3” tube, Trimming and drilling the fire tube, Milling the firebox, Cutting the ring from the coupler, Flanging the base, Completing the fire tube, Flanging the end caps, Making the door box, Making the hinges, Milling the door box, Making the burner holder, Making the burner, Boiler components, Boiler bushings, Hydro testing the boiler, Steaming the boiler, Conclusion, Resources.

DVD: Building a Vertical Boiler3820

$24.95● Mini Machines 202 seriesOur Oscillating Steam Engine kit is suitable for almost any level of machinist to build. The simple design of the engine makes it function on basically three moving parts! On this video, SwarfRat builds the engine on-camera. The engine is rather homely in its stock state, but SwarfRat shows you how -- with just an hour or so of extra work -- to transform it from an 'ugly duckling' into a 'swan'!

Best of all, the principle of the oscillating cylinder can be put into use for much more complicated projects. SwarfRat took the basic kit and a few inches of aluminum stock to make another simple cylinder and piston, ending up with a variable-angle twin cylinder engine.You could easily make multi-cylinder engines in boxxer, V-twin or radial format using this principle, and they'd be buildable with only basic machinist skills. This is truly a learning experience.

The DVD includes (on disk, not printed) a complete set of drawings for the engine, a materials list, and instructions.

DVD: Building the Oscillating Cylinder Steam/Air Engine3484

$39.95● Two DVD set● Includes video and ThreadBuddy softwareMini-Machines 101: Cutting V-Form Threads on the Mini Lathe plus ThreadBuddy V2.0 software.This video covers cutting external and internal V-form threads from basic theory to practice. Everything is clearly explained with charts, graphics and on-camera demos that will have you confident of success.We'll show you how to size your threads for precise, strong engagement, and point out the pitfalls that trip up many newcomers.Also included is an end user license for our Threadbuddy software. Threadbuddy does the math to calculate V-form thread dimensions. Enter the size and pitch of your desired part, and Threadbuddy will handle the number-crunching instantly

DVD: Cutting Threads on the Mini Lathe3111

$24.95Mini-Machines 101: Edge Finding and Location by SwarfRat Enterprises, LLC.This video demonstrates the many uses of the common edge finder and wiggler, explaining not just the how, but also the why, with detailed camera work, animations and charts that'll have even the novice quickly getting precision results.Topics covered are: Finding the edge with the wiggler and edge finder, locating points on X-Y coordinates, locating the center of a hole or bore, finding the center and edge of a shaft, laying out your work with metal dye or CAD printouts, using the wiggler's needle tool to square the workpiece and locate existing lines and coordinates. Also included is a short section on general shop safety. Running time: Approx. 43 minutes.

DVD: Edge Finding and Location2245



$21.95Mini-Machines 101: Lathe Fundamentals & Basic Turning by SwarfRat Enterprises, LLC.This video is designed to get you familiar with the lathe and its terminology, and take you all the way through to making your first cuts. The topics covered include introduction and shop safety, nomenclature and terminology, setting up and using your 3-jaw chuck, cutting tool types, shapes and uses, successfully dealing with backlash, setting cutting tool height, calculating depth of cut, face cuts, basic turning, compound angled cuts, using the lead screw, calculating TPI on double reduction, feeding normal cuts, and finish cuts. Also included is a short section on general shop safety. Running time: Approx. 65 minutes.

DVD: Lathe Fundamentals & Basic Turning2684

$42.90● Lathe Tool Sharpening DVD● 10 Lathe tool bits, 1/4" Square 2-1/2" Long M2 HSSThis DVD video, by Jose Rodriguez, provides an hour and a half instruction on sharpening lathe cutting tools and other grinding tasks.Learn how to create perfect lathe cutting tools from high speed steel tool bit blanks with a bench-top grinder. Create perfect left or right hand lathe cutting tools for brass, aluminum and steel. Produce a 60 degree threading tool that is as good as any commercially available threading tool bit. Learn how to prepare a parting tool for optimum results. Watch Jose as he revives an old jobber-length drill bit to give it a new lease on life. Put a new edge on worn two flute end mills and get many more hours of work out of them. Regrind screw driver tips to keep them from slipping off screw heads. Grinding is an art that can take months or years to fully master but with the right grinder and a bit of patience, you will be able to produce perfect results right in your shop.

DVD: Lathe Tool Sharpening and 1/4" Tool Bits3962







$30.00This DVD video, by Jose Rodriguez, provides an hour and a half instruction on sharpening lathe cutting tools and other grinding tasks.Learn how to create perfect lathe cutting tools from high speed steel tool bit blanks with a bench-top grinder. Create perfect left or right hand lathe cutting tools for brass, aluminum and steel. Produce a 60 degree threading tool that is as good as any commercially available threading tool bit. Learn how to prepare a parting tool for optimum results. Watch Jose as he revives an old jobber-length drill bit to give it a new lease on life. Put a new edge on worn two flute end mills and get many more hours of work out of them. Regrind screw driver tips to keep them from slipping off screw heads. Grinding is an art that can take months or years to fully master but with the right grinder and a bit of patience, you will be able to produce perfect results right in your shop.

DVD: Lathe Tool Sharpening and Other Things2396

$30.00This DVD, by Jose Rodriguez, provides complete instructions for making a miniature boring head.The DVD has a menu that makes it easy to return to parts of the video that you want to see again.Jose says: "Watch the author as he builds a fully operational and capable boring head. In this almost two hour video you will learn in full detail how to make a boring head with micrometer adjustment feature with very little material and equipment. In fact, although the author uses his home made milling machine to build it, it could be easily built using the TAIG lathe plus milling attachment. You will see the dovetailed components being built from layout to finish. The unit takes 1/4" shank shop made boring bars which you will see as well, although commercial 3/8" bring bars could be substituted instead. The idea here was to make a miniature version of a commercially available boring head complete will all the normal features found on them, but only about 1/2 the overall size. Small machines such as the Taig Micro mill and Sherline milling machines will vibrate when a full size boring head is installed with the head offset even a small amount. This unit is small, compact, but extremely strong and stiff. This will be evident at the end of the video during the actual test, boring out of an existing bore on a work piece. The head itself is adjustable in thousands of an inch with its graduated screw and its male dovetail is kept snug or fully locked during cutting by three gib screws. This unit has a real brass gib rather than the usual practice of slitting the female dovetail to create a pseudo gib. All in all, for the cost of a pack of cigarettes you make a great addition to your tool shelf that will perform for you for a lifetime."

DVD: Make a Miniature Boring Head2055

$43.00This DVD, by Jose Rodriguez, provides a four hour introduction to making gears.The DVD has a menu that makes it easy to return to parts of the video that you want to see again.Jose says: "Have you forgone the pleasure of building a small geared engine simply because the thought of having to cut your own gears brings a shiver down your metalworking spine? Even if can muster up the nerve, you realize that so called involute gear cutters cost an arm and a leg. Then you need a set of eight cutters to enable you to cut the entire range of teeth for 12 to Rack. The cost in cutters alone can reach well over $200 before you even begin thinking about arbors to hold them. It’s no wonder many of us will simply go to the nearest gear vendor and put down $50 -$60 for a pair of brass spur gears. In this video you will learn the secrets of the HOB. You will not only learn how to use a hob, but you will also learn how to build one from scratch right on your small to medium size lathe and small milling machine. For a total cost of about $3 in materials you can make a hob that will not only enable you to EASILY make any number tooth spur gear as well as even a worm and worm gear. You will be amazed at how simple gear making can be! You can make any diametral pitch hob by simply following the easy Diametral Pitch chart that is included as part of the video. The video shows a 1/10 pitch spiral and straight hob being made and then used to make gears of various diameters. You will not need to compute anything. All basic diameters for gear blanks for gears of any numbers of teeth will also be included in the package. If you rather use a calculator to figure out diameters, easy formulas for that are also included. Once you have used a HOB to cut a gear you will wonder why you would use anything else!"

DVD: Making Gears the Easy Way2057



$24.95Mini-Machines 101: Mill & Lathe Spindle and Gearbox Repair by SwarfRat Enterprises, LLC.We don't like to think about it, but machines break, and always at the worst possible time. This video shows you how to do spindle and gearbox repairs on both the mini mill and the mini lathe.You will see how to do a total drive train teardown, rebuild and reassembly of both machines.You'll learn how to tear down and reassemble the entire unit in just a few hours, using a simple set of spacers and plates to enable you to press your spindle and bearings in and out of the machine. There is also a CD-ROM included with mechanical drawings in multiple formats of these simple repair tools designed by Chris Wood of LittleMachineShop.com. You can make these tools yourself; just make sure you do it before your machine breaks!Running time is approximately 75 minutes.

DVD: Mill & Lathe Spindle and Gearbox Repair2637

$43.00This video, by Jose Rodriguez, provides a four hour introduction to milling on a drill press.Jose says: "Are you tired of avoiding machine projects simply because you do not own or have access to a milling machine? Learn some of the secrets to successful milling techniques utilizing your existing lathe as well as a drill press. I know what you must be thinking. This guy must be crazy! Milling on a drill press? I, as well as none other than Rudy Kouhoupt, have been doing just that very thing for years now with entirely good results in finish as well as dimensional accuracy. You will also see the Taig Micro Lathe being put trough its paces milling a workpiece held on the cross slide as well as with the vertical milling accessory. See the Taig with the externally mounted modified micro drill press to convert it into a miniature 3 in 1 machining center. See the 7 x 10 mini lathe in conjunction with the Taig Vertical Milling accessory performing milling cuts with hardly an effort. We finish the presentation with the 8" modified drill press performing milling on a rough block of stock held on a great little shop made milling vice. This the only drill press with a micrometer operated locking spindle. See it being used and you too will marvel at its simplicity. After viewing this tape, you too should be well on your way to the pleasures of milling without having to own a milling machine."

DVD: Milling on the Drill Press2267

$24.95Mini-Machines 101: Mini Mill Basics, Milling, Flycutting & Dovetailing by SwarfRat Enterprises, LLC.This video will help you make clean and precise cuts on your workpiece.Some of the topics on this video include: Conventional vs. climb milling and the uses of each; End mills, special cutters and nomenclature; Different methods for setting the Z-axis starting point for accurate machining; Squaring the workpiece and strategies for holding un-square stock; Finishing, deburring and breaking corners; Using single-point flycutters to create flawless finishes, Deburring and setting up workpieces for close-tolerance breaking of corners and chamfering; Milling deep features; Setting up and cutting dovetails; Finding the center of a hole or bore using a test indicator and using a co-axial indicator.Also included is a short section on general shop safety. Running time: Approx. 68 minutes.

DVD: Milling, Flycutting & Dovetailing2884

$129.95● Six DVD set includes the entire Mini Machines 101 Mill SeriesThe complete set of Mini Machines 101 Mill Series is available in this single, discounted price package. This set includes:Volume I: Mini Mill Basics, Clamping & Fixtures Volume II: Edge Finding and LocationVolume III: Precision Drilling, Reaming & TappingVolume IV: The Boring Head; Bores, Arcs, Saddles & MoreVolume V Teardown, Tuning & TrammingVolume VI: Milling, Flycutting & Dovetailing

DVD: Mini Machines 101 Complete Mill Series3141



$24.95Mini-Machines 101: Mini Mill Basics, Clamping & Fixtures by SwarfRat Enterprises, LLC.This video discusses and illustrates the basics of the mini mill, starting with the terminology that one needs to communicate successfully with other machinists, all the way through to specialized fixtures and bedplates designed to make multi-part production faster and more accurate. With liberal use of animations, illustrations and actual on-screen setups, the information is clearly presented and easily understood. The DVD chapter format makes it easy to go back and review sections over again.Topics covered are: Terminology and nomenclature, tools and equipment, basic principles of clamping, squaring (aligning) the stock, squaring round stock, setting up and tramming the screwless vise, bedplates and specialized fixtures. Also included is a short section on general shop safety. Running time: Approx. 50 minutes.

DVD: Mini Mill Basics, Clamping & Fixtures2324

$24.95Mini-Machines 101: Precision Drilling, Reaming & Tapping by SwarfRat Enterprises, LLC.This video shows you how to drill and ream for precision press and slip fits, as well as how to tap accurate threads, and plunge mill flat-bottomed recesses for fastener counter bores.It also introduces the spindle and tapers, collets and tool holders, as well as all sorts of regular and specialized drill bits, reamers and taps. Learn to use the telescoping gauge and outside micrometer for precise bore measurements, and how to use a dial indicator in conjunction with a wiggler for close tolerance work.Topics covered are: Using a wiggler and dial indicator for backlash removal, using telescoping gauges and a micrometer to measure holes, drilling, reaming and tapping tools, drilling and reaming, tapping threads manually, plunge milling counter bores. Also included is a short section on general shop safety. Running time is approximately 55 minutes.

DVD: Precision Drilling, Reaming & Tapping2410

$49.95● How to set up and operate the Sherline latheSherline Lathe Basics gives a great introduction to using the Sherline lathe.Topics covered include turning, facing, boring, workholding, eccentrics, tapers, threading, tool bit grinding, backlash, setting tool height, cleaning a chuck, hand wheel dial adjustment, using the follower rest, mounting the lathe aligning the headstock and milling.Approximate running time: 213 minutes.

DVD: Sherline Lathe Basics3441

$39.95● Teaches you to operate and maintain precision measuring equipment● Easy-to-understand words, diagrams, and three-dimensional graphics explain operation of the tools● Covers equipment that even experienced machinists may not know how to operateShop Secrets, Volume 1 Is a two-hour video on the use and care of machinist measuring tools and related machine shop operations. Produced for the beginning machinist, this video is in use at technical high schools in the US and in industry both in the US and the Far East.Topics include adjustable parallels, backlash, calipers, combination squares, optical comparator, dial indicators, edge finders, left-handed lead screw operation, micrometers, precision squares, radius gages, shop safety, small hole gages, thread gages, telescoping gages, thread pitch gages, vernier scales, vision assists, wigglers, steel rules.Running time: 1:52 hours.

DVD: Shop Secrets Volume 1: Measuring Tools3440

$24.95Mini-Machines 101: Teardown, Tuning & Tramming by SwarfRat Enterprises, LLC.This video guides you step-by-step through a complete disassembly and reassembly of ALL three axes of the mini mill. It shows you how to adjust the gibs to remove play and yet allow free movement of the mill bed and spindle head. Learn how to adjust the hand wheel assemblies to remove unnecessary backlash, and to align the X- & Y-axis screws with their respective nuts so as to avoid binding during table travel. See the easy way to tram your mill spindle to closer than 0.001" in all three axes. This volume is jam-packed with easy-to-follow practical information that is absolutely necessary if you intend to make precision parts!Running time is approximately 55 minutes.

DVD: Teardown, Tuning & Tramming2537



$24.95Mini-Machines 101: The Boring Head: Bores, Arcs, Saddles & More by SwarfRat Enterprises, LLC.This video shows you how to use the boring head, not only to accurately enlarge holes and cut bores for your projects, but also how to use the tool in non--centered operations, such as truing up elliptical holes and cutting arcs into flat stock, as well as cutting saddles into round stock.This tool has a much wider range of uses than you might imagine! Topics covered are: Introduction and safety, Centered operations theory and practice, Non-centered setup, cutting a saddle in round stock and alternate uses.Running time: Approximately. 45 minutes.

DVD: The Boring Head: Bores, Arcs, Saddles & More2447

$43.00This DVD, by Jose Rodriguez, provides a 4 hour introduction to the use of the milling machine.The DVD has a menu that makes it easy to return to parts of the video that you want to see again.Jose says: "This brand new video tapes was just produced in 99 as a result of the most ambitious project undertaken by the author. It features his shop made modelmaker's variable speed milling machine. The video is basically a complete basic milling operations course but rather than boring the viewer with dozens of unrelated procedures, you get to see the author produce a dovetailed tool block for his quick change tool system he designed for his 7 x 10 mini lathe. This is a four hour presentation that will leave you asking for more, even after four fun packed hours."

DVD: The Milling Machine and its Uses2056

$39.95● Two DVD set● Includes video and SpinBuddy softwareMini Machines 202: The Rotary Table: Curves Ahead plus SpinBuddy softwareThis video will show you how to use a rotary table to cut circles, curves, arcs, as well as to perform precision repetitive operations such as bolt circles, gear and sprocket teeth, scale engraving and more. It will show you how to set up, calculate and use your mini rotary table.Topics include: Introdution and Safety, Setting Up the Rotary Table, Varying Degrees of Degrees, Dialing Degrees, Minutes and Seconds, Dividing Plate Setup, Dividing Plate Calculations, Bed Plate Basics, Using the Rotary Table Horizontally, The Quick Indexer Fixture, Laying out and Visualizing Offsets, and Installing and Using the SpinBuddy Software.

DVD: The Rotary Table3406

$19.95● Mini Machines 202 seriesHave you wanted to learn how to use a sine bar? How to set up and hold a precise angle when milling a part? How to deal with the trigonometry involved with finding the correct spaceblock height for a sinebar or vise?This volume will demonstrate and explain the use of precision, Kurt style and Sine vises, as well as sine bars and sine plates.Some of the topics covered are: Intro & Shop Safety, General vise mounting and basics, Screwless precision and sine vises, Angle plates, Law of SinesSpace blocks, Sine bars, plates, vises, compound angles, Kurt Anglelock Vise, and angular tramming.With the purchase of this DVD, you've also purchased a single-user license to use the SineBuddy sine bar & space block calculator included on the DVD. This calculator takes care of the trigonometry involved in calculating angles and spaceblocks.

DVD: The Vise Squad - Precision Workholding and Measuring Techniq3567

$33.00This DVD, by Jose Rodriguez, provides a 2 hour introduction to threading on the mini lathe.The DVD has a menu that makes it easy to return to parts of the video that you want to see again.Jose says: "Finally the mystery of thread cutting has been made simple enough for the first time user! In this two hour video tape you will see and learn the easy way to cut with taps, dies as well as perform external and internal single point threading operations. Learn the secrets of that "DREADED" threading dial as well as how to avoid using the dial altogether if you chose to. The perfect companion to have along when you are ready to produce extremely true running threads for all your projects!"

DVD: Threading on the Lathe2054



$19.95Mini Machines 101 General Machinist SeriesToolmaking & Restoration by SwarfRat Enterprises, LLC.This video delves into the art of restoring damaged parts, as well as how to design and fabricate special tools for our projects, whatever they may be.Have you ever had a part with the threads so damaged that you can't put a die over them to clean them up? This video demonstrates with a 40-year-old oil pump shaft from a vintage Italian Aermacchi engine, where the shaft was so mushroomed on the end as to be worthless. Learn the technique to synchronize the lathe to the existing threads, enabling you to re-cut the damaged threads and save the part.It shows you how to measure and lay out a complex bolt pattern from the same engine manually, and tricks for doing it with a CAD program.Then the video shows how to use the layout to make a universal press and separator tool, as well as flywheel and armature pullers; tools that are no longer available, yet necessary to disassemble the motor. Along the way, it discusses material and design considerations for tooling in general.For those of you who haven't yet cut threads with your mini lathe, this is a great introduction to the process.

DVD: Toolmaking & Restoration2927

$24.95● Includes video and ShopBuddy softwareMini-Machines 101:Beyond the 3-Jaw Chuck: Foru-Jaws, Faceplates, Fixtures & More on the Mini Lathe plus ShopBuddy software.This video is designed to familiarize you with alternate methods of work holding that will allow you to use your mini lathe to its full potential.Some of the topics covered are shop safety, setting up and using a 4-jaw chuck, centering round stock, centering non-round stock, tailstock & laser methods of centering, using the lathe wiggler, faceplate operations, turning between centers, and using fixtures for large work pieces.Also included is an end user license for our Shopbuddy software. Shopbuddy does the math to calculate V-form thread dimensions. Enter the size and pitch of your desired part, and Shopbuddy will handle the number-crunching instantlyRunning time: Approx. 55 minutes.

DVD: Work Holding on the Mini Lathe3123

Vises: Accessories

See the vise comparison chart at the back of this catalog.Vise Comparison

Vises: Milling Vises

$54.95This 3" milling vise is good for general mill work.

Vise, 3" Milling1647

$89.95Precision 3" Kurt-style milling vise with swivel base.The top, bottom of vise bed, gib, jaws, swivel base, and all plate mounting surfaces are ground.The jaws are hardened and ground.The detachable swivel base allows 360 degree rotation of the vise.

Vise, 3" Precision Milling2500

Vise, 3" Precision Milling Plus Parallels and Mounting Kit3969 $129.85


Vises: Milling Vises

$99.95● Precision 3" Kurt-style milling machine vise● Detachable swivel base features easy to read divisions● Hardened replaceable jaws● The top, bottom of vise bed, gib, jaws, swivel base, and all plate mounting surfaces are groundThe replaceable jaws can be mounted on either end of the fixed and movable jaw supports providing a wide range of clamping distances.

Vise, 3" Precision Milling, Heavy1699

Jaws, 3" Precision Milling Vise1789 $14.95Jaws, 4" Precision Milling Vise3710 $14.95Soft Jaws, 3" Vise3070 $14.95Soft Jaws, 4" Vise3443 $15.95Vise Mounting Kit3125 $9.95Vise, 4" Precision Milling, Heavy1755 $129.95Vise, 5" Precision Milling, Heavy3951 $199.95

$129.95Precision 3" accu-lock milling machine vise with swivel base.The top, bottom of vise bed, gib, jaws, swivel base, and all plate mounting surfaces are ground.The jaws are hardened and ground.The detachable swivel base features easy to read divisions.

Vise, 3" Precision Milling, Phase II1904

$179.95● Lock down type● Compact size alows multiple vises on CNC mill table● Flatness of all sides within 0.001"● Mount upright, or on left or right sides● Sides parallel within 0.0005" in 4"This vise is designed for CNC milling machines where a swivel base is never required. The compact size allows you to mount multiple vises on the CNC mill table so you can machine several items in one setup.The vise closes with up to 3000 N (675 lbs) of clamping force.

Vise, 4" CNC Mill3857

Vises: Other Vises

$214.00● Starrett combination hand and bench vise● Starrett catalog number 86A● Use as a hand vise or a bench vise● Wide range of uses for all toolmakers, mechanics, hobbyists and do-it-yourselfers● Approximately 1/2-2 1/8" (13-54 mm) in thicknessThis combination hand and bench vise has a wide range of uses for all toolmakers, mechanics, hobbyists and do-it-yourselfers. When a vise is needed at different locations for convenience, this tool is indispensable. By removing the handle and substituting the clamp, the tool may be fastened to benches, shelves, and so on. It is approximately 1/2-2 1/8" (13-54 mm) in thickness, and can be adjusted to different positions according to the user's preference.When used as a hand vise, the leverage obtainable with the ball end lever will be appreciated in comparison with a wing nut commonly employed for this purpose. The jaws are made from forgings and are properly tempered.

Hand and Bench Vise, Starrett2351

$35.95This is our smallest vise. The ratchet device makes it quick to adjust.The jaws are 50 mm (1.95") wide.The jaws are 16 mm (0.63) deep and open to 38 mm (1.48") capacity.The vise is 140 mm (5.50") long.

Vise, 2" Quick1276


Vises: Other Vises

$26.95● Full 90° horizontal to vertical adjustment● Multiple bolt slots in base for easy mounting● Angle dial on one side and locking knob on opposite sideThe jaws are 3.5" wide, 1.25" deep, and open to 3..25" capacity.

Vise, 3.5" 0-90° Tilting3643

$54.95● 4" travel in both X and Y directions● Multiple bolt slots in base for easy mounting● Dials graduated in 0.001" increments● Balanced ball crank handlesJaws are 4" wide, 1.44" deep, and open to 3.75". The base is 5" x 10.5".This is a better version of the vise that is mentioned in the April/May 2010 issue of American Woodworker.

Vise, 4" Cross-Sliding3899

$49.95● Designed specifically for use on the mini mill● Ratchet device makes it quick to adjustThe jaws are 100mm (3.94") wide.The jaws are 0.88" deep and open to 3.23" capacity.The vise is 10.50" long.The base of the vise is 200 mm by 90 mm. The slots are 12 mm wide. The slots are 80 mm apart, and there is 40 mm between the radiused ends of the slots.

Vise, 4" Quick1145

$495.95This fixture is composed of two parts; a precision vise and a swivel angle plate base Vise revolves 360° horizontally with 3’ engraved graduations and 45° vertical with 3’ engraved graduations Hex wrench included for locking vise at any position Vertical angle can be adjusted with fine adjustment knob Hardened and precision ground parallel and square within 0.0004” Unique universal movement for precision grinding, machining, boring and other applications

Vise, Universal Movement3524

Vises: Screwless Vises

$49.95This high precision toolmakers screwless vise has a one-piece body. The body and jaws are hardened to Rc 58-62. All sides are flat, square and parallel to 0.0002". There are horizontal and vertical vees on the inside face of the movable jaw to hold round objects.The jaws are 1.38" deep and open to 3.78" capacity.The vise is 7.28" long, 2.76" tall and 3.00" wide.

Vise, 3" Screwless1590

Clamps, Screwless Vise2675 $19.95Vise, 1" Screwless, Built-in Parallels3142 $34.95Vise, 1" Screwless, Square Jaws3949 $34.95Vise, 1.5" Screwless, Square Jaws3950 $44.95Vise, 2" Screwless1591 $44.95Vise, 2" Screwless with 3" Thin Parallels3769 $59.90Vise, 3" Screwless plus Parallels and Mounting Clamps3763 $99.85Vise, 3" Screwless with Clamping Slots2356 $79.95Vise, 3" Screwless, with Hold Down Clamps3767 $69.90

$109.003" Precision screwless sine vise.Jaw width is 3.15", jaw depth is 1.25", jaw opening is 4".The base size is 7.638" x 3.15".The center distance of the cylinders is 4.000".Hardened and precision ground to a tolerance of .0004” for both parallelism and squareness. Sine range: 0 - 60°. Jaw can be opened or closed without unbolting vise from work surface.

Vise, 3" Sine Screwless1756

Space Block Set1757 $44.95


Part no. 1276 1145 1647 2500,1904 1699 1755 3142 1591 1590, 2356 1756

Vise

Com

pariso

n

Description 2" Quick Vise

4" Quick Vise

3" Milling Vise

3" Precision Milling Vise

3" Precision Milling

Vise, Heavy

4" Precision Milling

Vise, Heavy

1" Screwless Vise

2" Screwless Vise

3" Screwless Vise

3" Screwless Sine Vise

Price $35.95 $49.95 $54.95 $89.95, $129.95 $99.95 $129.95 $34.95 $44.95 $49.95, $79.95 $109.00

Jaw width 1.95" 3.94" 3.15" 3.1" 3.15" 4" 1.00" 1.97" 2.88" 3.15"

Jaw depth 0.63" 0.88" 1.21" 1.0" 1.04" 1.18" 0.36" 0.98" 1.38" 1.25"

Maximum jaw opening

1.48" 3.23" 2.56" 2.85" 3.0" 4.0" 1.00" 2.39" 3.95" 4.0"

Swivel base No No Yes Yes Yes Yes No No No No

Weight 1.7 lbs 11 lbs 13.5 lbs 19 lbs 22 lbs 35 lbs 0.5 lbs 3 lbs 8.5 lbs 10 lbs

Height (w/o base)

1.55" 2.63" 3.60" (2.75")

3.87" (2.87")

4.21" (3.05")

4.72" 1.14" 1.95" 2.76"

Length 5.50" 10.50" 8.63" 10" 10.85" 13.4" 2.57" 5.32" 7.63" 7.63"

Width (w/o base)

2.35" 3.92" 6.30" (4.10")

7.25" (5.5")

7.75" (5.15")

9" 1.00" 1.97" 2.88" 3.05"

Mounting bolt centers (w/o base)

1.78" 2.20" 5.50" (3.00")

6.38" (3.95")

6.50" (4.25")

n/a n/a n/a n/a

Hold-down mechanism

No No No Yes Yes Yes Yes Yes Yes Yes

Rotary Table Comparison

Part number 1810 1927 1727 2326 1787

Description Rotary Table, 4" Precision

Rotary Table, 4" H/V

Rotary Table, 4" Phase II

Rotary Table, 6" Precision

Rotary Table, 6" Phase II

Price $169.95 $249.95 $279.95 $249.95 $295.95

Diameter 4" 4" 4" 6" 6"

Thru hole 2 Morse Taper

2 Morse Taper

2 Morse Taper

2 Morse Taper

2 Morse Taper

Horizontal Yes Yes Yes Yes Yes

Vertical Yes Yes Yes Yes Yes

Flatness 0.0008" 0.0006" 0.0006" 0.0008" 0.0006"

Parallelism 0.0008" 0.0008" 0.0008" 0.0008" 0.0008"

Squareness 0.0012" 0.0004" 0.0004" 0.0012" 0.0004"

Height 2.87" 2.76" 2.76" 3.70" 3.35"

Vertical center height 2.68" 2.76" 2.76" 3.86" 4.92"

Ratio 72 to 1 72 to 1 72 to 1 72 to 1 90 to 1

Weight 16 lbs. 14 lbs. 14 lbs. 34 lbs. 66 lbs.

Rotational accuracy 10 seconds 10 seconds 10 seconds 10 seconds 10 seconds

T-slot size 8 mm 6 mm 6 mm 10 mm 10 mm

Tail stock (part number) 1812 1800 1800 2327 1802

Dividing plate set (part number)

1811 1799 1799 2328 1801

Set including table, tailstock, dividing plate, and chuck (part number)

2183 3131 3132

1931 3791 3792

2329

3566

Indexable Inserts

To work with these tools… Use these high speed steel inserts… Or these carbide inserts

Part no. Tool or set

Part no. Industry number

Corner radius

Part no.

Industry number

Corner radius

1913 1/4" Turning Tools 2033 TCMT-1.81.51 1/64"

1719 1/4" Turning Tools, A R Warner

1722 1723

TPMW-1.81.5.5 TPMW-1.81.51

0.008" 1/64"

3693 1/4" Turning & 3/8" Boring Tools, A R Warner

3696 3697

CCMW-2-1.5-1 CEMW-2-1.5-1

1/64" 1/64"

1669 3/8" Turning Tools, Phase II

1724 1725

TCGW-21.51 TCGW-21.52

1/64" 1/32"

3416 1670 3417

TCMT-21.50 TCMT-21.51 TCMT-21.52

0.008" 1/64" 1/32"

1679 3/8" Turning Tools 1680 TCMM-221 1/64"


1624 1621

TPMW-221 TPMW-222

1/64" 1/32"

3694 3/8" Turning and Boring Tools, A R Warner

3696 3697

CCMW-2-1.5-1 CEMW-2-1.5-1

1/64" 1/64"

2286 1/2" Turning Tools 3698 TCMW-321 1/64" 2381 TCMM-321 1/64"


1623 1622

TPMB-321 TPMB-322

1/64" 1/32"


3573 3574 3575

CCMW-3-2.5-.5 CCMW-3-2.5-1 CCMW-3-2.5-2

0.008" 1/64" 1/32"

1779 3/8" Boring Bar, Phase II 3696 CCMW-2-1.5-1 1/64" 1781 CCMT 21.51 1/64"

1720 3/8" Boring Bar, A R Warner

1722 1723

TPMW-1.81.5.5 TPMW-1.81.51

0.008" 1/64"

1780 1/2" Boring Bar, Phase II 3573 3574 3575

CCMW-3-2.5-.5 CCMW-3-2.5-1 CCMW-3-2.5-2

0.008" 1/64" 1/32"

1795 CCMT 32.52 1/32"

1721 1/2" Boring Bar, A R Warner

1624 1621

TPMW-221 TPMW-222

1/64" 1/32"

2431 Profiling Tool, 3/8" HSS & Carbide Inserts

3470 VCMW-222 1/32" 3471 VCMT-222 1/32"

3695 3/8" Threading Tool, A R Warner

3468 3469

TNMC-32-MV TPMC-32-MV

0" 0"

3467 Threading Tool, 1/2" Indexable HSS Inserts

3468 3469

TNMC-32-MV TPMC-32-MV

0" 0"

3572 Grooving & Cutoff Tool, A R Warner

3576 3577 3578

1/64" (0.015") Groover 1/32" (0.031") Groover 1/16" (0.062") Groover

0" 0" 0"

1146 3MT Indexable End Mill 1216 TPCN1603PDR

1889 2MT Indexable End Mill 1910 TPCN1103PDR

1952 R8 Indexable End Mill 2277 TPG322

Lathe Chuck Capacities

3-Jaw Self Centering Lathe Chuck Capacities

Part number Chuck Diameter

Center hole

Rated capacity

Inside jaws Outside jaws

2916 2" 3-Jaw 50 mm 1.97"

N/A 2–14 mm 0.08–0.55"

25–33 mm 0.98–1.30"

1187 3" 3-Jaw 80 mm 3.15"

16 mm 0.63"

2-22 mm 0.08-0.87"

22-63 mm 0.87-2.48"

1698 1941

4" 3-Jaw 100 mm 3.94"

22 mm 0.87"

2-30 mm 0.08-1.18"

30-80 mm 1.18-3.15"

2337 2345

5" 3-Jaw 125 mm 4.92"

30 mm 1.18"

2.5-40 mm 0.10-1.57"

38-110 mm 1.50-4.33"

2028 6" 3-Jaw 160 mm 6.30"

40 mm 1.57"

3-55 mm 0.12-2.17"

55-145 mm 2.16-5.71"

4-Jaw Independent Lathe Chuck Capacities


Center hole

Rated capacity


1175 3"4-Jaw 80 mm 3.15"

22 mm 0.87"

5-40 mm 0.20-1.57"

35-80 mm 1.38-3.15"

1588 1697

4" 4-Jaw 100 mm 3.94"

25 mm 0.98"

6-45 mm 0.24-1.77"

40-100 mm 1.57-3.94"

2338 2346

5" 4-Jaw 125 mm 4.92"

30 mm 1.18"

7-57 mm 0.28-2.24"

48-125 mm 1.89-4.92"

2038 6" 4-Jaw 160 mm 6.30"

45 mm 1.77"

8-80 mm 0.31-3.15"

50-160 mm 1.97-6.30"

Special Lathe Chuck Capacities


Center hole

Rated capacity


3424 3" 4-Jaw Self Centering

80 mm 3.15"

16 mm 0.63"

2-22 mm 0.08-0.87"

22-63 mm 0.87-2.48"


102 mm 4.02"

20 mm 0.79"

3.5-32 mm 0.14-1.26"

32-80 mm 1.26-3.14"


100 mm 3.94"

26 mm 1.02"

http://littlemachineshop.com/products/product_view.php?ProductID=1187















LittleMachineShop.com Order Form

Purchaser Ship to (if different)

Name Name

Address Address

Phone Phone

Email Fax

I would like to receive occasional announcements of sales and new products by email.

Qty Part number

Description Unit price Total

Subtotal

Shipping & handling (see table below)

California residents add 8¼% sales tax

Total

Shipping & Handling:

Less than $25.00 $7.00

$25.00 to $49.99 $9.00

$50.00 to $74.99 $10.00

$75.00 to $99.99 $11.00

$100.00 to $149.99

$12.50

$150.00 to $399.99

8% of subtotal

$400.00 or more 6% of subtotal

Ground service to US addresses only. Contact us for rates for other services and destinations.

Web For next-day shipping and secure credit card payment, place your order on our web site: www.LittleMachineShop.com

Mail Mail your order with your credit card information or a check to: LittleMachineShop.com 396 W Washington Blvd Ste 500 Pasadena CA 91103-2002

Phone Call us at 800 981 9663 or 626 797 7850 to place your order.

Fax Fax this page with your credit card information to 626 797 7934.

Card Number

Expiration Date

Security Code

PRSRT STANDARD U.S. POSTAGE

PAID PASADENA, CA

PERMIT NO. 648

The premier source of tooling, parts, and accessories for bench top machinists.

396 W Washington Blvd #500 • Pasadena, CA 91103

Documents

machine shop Catalog