• SUVA S315 Circular Saw Guard - 27175

• • New Safety Guard for Circular

Saws This new guard rises and falls with the sawblade and independently from the blade when timber passes underneath the blade.Guard is supplied complete with riving knife.Technical Specification:Max saw diameter 315 mmMinimum saw diameter 250 mmDust outlet size 60 mm

• £159

• Alfa Circular Saw Guard - with push stick• • • & riving knife • Alfa guard for circular saws to be fitted upon riving-

knifeMade of polycarbonate, is adapted for every type of circular saw fitting blades with a max. diameter 300mm.This protection hood is provided with a suction pipe outlet of 60mm. A workpiece pusher serially supplied with the guard facilitates the machining of small diemnsioned workpieces. A match-mark provided on hood front part indicates the cutting line.The peculiar shape of its front part alllows the guard to move up when introducing workpiece beneath it, recovering thus eventual differences, even significant, due to an incorrect adjustment of the hood itself. A lever will lock hood in the position desired. This protection hood can be fitted on the riving-knife in two different positions according to blade diameter: 250mm and 300mm.2.8MM riving knife

• Price £109.00

• CX450 Circular Saw Guard• • • CX type guard.

can be fitted to any circular saws with worktable, whether fitted with scoring or post-forming unit. It is composed of; a hood covering the blade unit, a supporting arm, a support, a fastener to machine bed. When performing a cut, with the handle raise the hood parallel to worktable just that much to allow the workpiece to pass underneath.The left side is made of transparent material allows the operator to see the blade and the workpiece being cut. The suction outlet 100mm outlet, can be connected with the extraction plant, was conceived so to ensure maximum performance when hood is completely down, resting against the workpiece surface. Packing size. 0.64m x 1.9m x 0.21m

• Draper CHUCK GUARD