M7 Catalog

Catalogue

Pneumatic tools

Global expansion

FRANCE IBÉRICA BENELUX DEUTSCHLAND

All the pneumatic tools should only be used as hand operated tools. They are powered by compressed air and are not insulated against electric shock.

Always turn off the air supply and disconnect the air hose before changing or replacing any inserted tool and accessory.

Before using these tools, make sure that all couplings and plugs are securely fastened. Air hoses which are under pressure may lash out when disconnecting, that can lead to serious injury!

High sound levels may cause hearing damage. Always wear hearing protection when operating this tool.

Wearing eye/face protection can reduce the danger of high-speed materials being emitted from the tool. Make sure that the direction of the spark generated from the cutting wheel grinding wheel or shank stone is properly directed so as to not create a hazard..

Always wear gloves to reduce risk

User must wear proper clothing. Loose clothing, long hair, stings, straps, belts and jewelry should not be worn when operating this tool.

Long periods of prolong use will cause fatigue. Periodic breaks are recommended for user safety.

It is recommended to stop operating the tool whenever discomfort, tingling or pain occurs during use.

Make sure there is no gas or combustible material stored near the tool when servicing, changing insert tools, or storage.

Wearing proper breathing protection to avoid inhale dust or handling debris from working process, which can be harmful to the health.

Warning:!

Ranges products

Air Impact wrench ........................................................ p 04

Air ratchet wrench ........................................................ p 13

Air die grinder .............................................................. p 16

Air angle grinder ........................................................... p 20

Air sander ................................................................... p 23

Air screwdriver ............................................................. p 28

Air drill ........................................................................ p 30

Air hydraulic riveter ...................................................... p 32

Air Shear and Air Saw ................................................... p 34

Air hammer .................................................................. p 36

Auto repair tool ............................................................ p 39

Filter Regulator Lubricator ............................................. p 44

Air grease gun .............................................................. p 46

Air blow gun ................................................................ p 49

Reel Air hose / Recoil Air hose / Balancers ...................... p 50

Mounting / Socket set ................................................... p 51

Air Adaptor ................................................................. p 52

Air tools (pneumatic)

Power tools (electric)Cordless ...................................................................... p 53

Wired ......................................................................... p 58

Air Impact wrench

Complete air tool solutions

Pin Clutch Twin Dog Pin-Less Twin Hammer New Twin Hammer Rocking Dog

MIGHTY SEVEN4

SUPPORT VALUE EXPERTISE

Air Impact wrench

MIGHTY SEVEN 5No contractual pictures – Public prices in euro excl VAT - Offer valid until the 31/03/2015

Jumbo Hammer

Small

Light

Powerful

miniNC4610

Lenght

Weight

Max. Torque

115.5mm

1.6 kg

610Nm

See page 7

MIGHTY SEVEN 5


Air Impact wrench

MIGHTY SEVEN6 No contractual pictures – Public prices in euro excl VAT - Offer valid until the 31/03/2015

NC3111 3/8" Air Impact Wrench

NC4212

1/2" Air Impact wrenchNC4222 NC4225

NC____ : extended anvil

NC4215

NC____ : standard anvil

1/2" Air Impact wrench

NPT air inlet : 1/4"

NC3210

3/8" Compact Air Impact Wrench Twin Hammer NPT air inlet : 1/4"

NC3410

3/8" "Butterfly" Air Impact Wrench Rocking Dog NPT air inlet : 1/4"

Pin Clutch

NC4131MA

1/2" Air Impact wrench Pin ClutchNPT air inlet : 1/4"

NPT air inlet : 1/4" NPT air inlet : 1/4"New Twin Hammer New Twin Hammer


NC4213A

1/2" Air Impact wrenchNC4223

Twin Hammer

NC4217 1/2" Air Impact wrench Twin HammerNPT air inlet : 1/4" Twin Hammer

NC4233A 1/2" Composite Air Impact wrench


NC____Q : Quiet

CLEARANCE*

* Limited stock


Air Impact wrench


CLEARANCE*

SquareDrive

BoltCapacity

Torque Range

MaxTorque

FreeSpeed

AirConsumption

AirPressure

OverallLength

WeightAir

HoseSound

PressureVibration

LevelPrice

Inch mm Nm Nm R.P.M L/min bar mm kg Inch dBA m/s² €

€NC3111 3/8" 13 95-176 216 9 000 113 6.3 163 1.6 3/8" 93.3 4.1

NC3210 3/8" 13 136-407 474 10 000 113 6.3 142 1.5 3/8" 92.1 3.6

NC3410 3/8" 10 7-68 102 10 000 71 6.3 159 0.8 3/8" 92.1 3.6

NC4131MA 1/2" 16 203-475 610 7000 119 6.3 200 2.4 3/8" 95.1 2.7

NC4212 1/2" 16 203-407 746 7 000 113 6.3 182 2.8 3/8" 86.1 3.7

NC4222 1/2" 16 203-407 746 7 000 113 6.3 233 3 3/8" 86.1 3.7

NC4215 1/2" 19 244-542 949 6 500 124 6.3 195 2.9 3/8" 91.4 3.8

NC4225 1/2" 19 244-542 949 6 500 124 6.3 246 3.1 3/8" 91.4 3.8

NC4213A 1/2" 16 244-542 813 6 500 119 6.3 182 2.8 3/8" 91.0 3.8

NC4223 1/2" 16 244-542 813 6 500 119 6.3 232 2.9 3/8" 91.0 3.8

NC4217 1/2" 16 203-434 542 7 000 119 6.3 184 2.5 3/8" 92.1 3.7

NC4233A 1/2" 19 271-678 1152 9 000 132 6.3 190 2.10 3/8" 85 3.8

NC4236A 1/2" 25 271-949 1356 7 500 155 6.3 171 2.62 3/8" 87.0 4.5

NC4216 1/2" 16 244-542 881 9 000 119 6.3 195 2 3/8" 93.9 4.5

NC4226 1/2" 16 244-542 881 9 000 119 6.3 225 2.2 3/8" 93.9 4.5

NC4610 1/2" 16 271-475 610 9 000 124 6.3 115.5 1.6 3/8" 93.0 2.8

NC4610Q 1/2" 16 271-475 542 9 000 124 6.3 115.5 1.6 3/8" 85.0 2.8

NC4620QA04 1/2" 16 271-475 610 9 000 119 6.3 166 1.7 3/8" 85 2.8

NC4230 1/2" 19 244-678 949 7 500 127 6.3 164 2.5 3/8" 87 4.5

NC4236A

1/2" Compact Air Impact Wrench Twin Hammer NPT air inlet : 1/4" NPT air inlet : 1/4"

NC4216

1/2" Composite Air Impact wrench

NC4226

Twin Hammer

NC4610

1/2" Compact Air Impact Wrench


NC4620QA04 1/2" Compact Air Impact Wrench Jumbo HammerNPT air inlet : 1/4"

NC4610Q

Jumbo Hammer

NC4230 1/2" Compact Air Impact Wrench Twin HammerNPT air inlet : 1/4"

* Limited stock


Air Impact wrench


NC6213

3/4'' Composite Air Impact wrench



NC6210

3/4" Compact Air Impact Wrench Twin Hammer NPT air inlet : 1/4"


NC6236 3/4" Air Impact wrench New Twin Hammer NPT air inlet : 1/4"

NC6218 3/4" Air Impact wrench Twin HammerNPT air inlet : 1/4"

NC8212

1" Composite Air Impact wrench New Twin Hammer NPT air inlet : 3/8"



NPT air inlet : 1/4"Twin Hammer

Pin Clutch

New Twin Hammer

NC6123

NC6222

NC6113A

NC6212

3/4" Air Impact wrenchNC6225NC6215

New Twin Hammer

NC8219 1" Air Impact wrench New Twin Hammer NPT air inlet : 1/2"

NC____ : extended anvilNC____ : standard anvil

NC____Q : Quiet

CLEARANCE*

* Limited stock


Air Impact wrench


SquareDrive

BoltCapacity

Torque Range

MaxTorque

FreeSpeed

AirConsumption

AirPressure

OverallLength

WeightAir

HoseSound

PressureVibration

LevelPrice

Inch mm Nm Nm R.P.M L/min bar mm kg (LBS) Inch dBA m/s² €

€NC6113A 3/4" 25 203-814 1153 4 500 198 6.3 252 4.6 1/2" 94.3 7.2

NC6123 3/4" 25 203-814 1153 4 500 198 6.3 360 5.3 1/2" 94.3 7.2

NC6212 3/4" 19 244-542 1017 6 300 124 6.3 227 3 1/2" 88.1 7.8

NC6222 3/4" 19 244-542 1017 6 300 124 6.3 404 3.4 1/2" 88.1 7.8

NC6210 3/4" 19 244-810 1017 7 500 127 6.3 170 2.55 3/8" 87 4.5

NC6213 3/4" 27 271-1356 1627 6 000 195 6.3 239 3.88 1/2" 92 5

NC6218 3/4" 27 271-1898 2034 6 000 182 6.3 320 5.7 1/2" 106 3.3

NC6215 3/4" 25 244-810 1220 6 500 198 6.3 234 4.5 1/2" 91.5 10.8

NC6225 3/4" 25 244-810 1220 6 500 198 6.3 350 4.9 1/2" 91.5 10.8

NC6236 3/4" 25 271-1220 1627 7 500 155 6.3 171 2.68 1/2" 87 4.5

NC8212 1" 27 271-1356 1762 6 000 170 6.3 235 4.4 1/2" 91.2 5

NC8219 1" 36 271-2170 2441 4 000 311 6.3 315 9.84 1/2" 103.4 16.7

NC8216 1" 33 271-2170 2441 6 000 254 6.3 343 7 1/2" 102 9.3

NC8321MA 1" 33 271-2170 2441 4 000 325 6.3 380 10.9 1/2" 97 6.3

NC8351 1" 33 271-2170 2441 4 000 325 6.3 510 12.5 1/2" 101 7.3

NC8322 1" 36 271-2710 3390 3 300 311 6.3 440 15.5 1/2" 93.9 8.8

NC8342 1" 36 271-2710 3390 3 300 311 6.3 619 17.3 1/2" 93.9 8.8

NC8372 1" 36 271-2710 3390 3 700 284 6.3 615 17.6 1/2" 93.9 7.3

NC8216 1" Air Impact wrench Twin HammerNPT air inlet : 1/4"

NC8321MA 1" Air Impact wrench Pin-LessNPT air inlet : 1/2"

Pin-Less

NC8351 1" Air Impact wrench Pin-LessNPT air inlet : 1/2"


NC8322

1" Air Impact wrenchNC8342

NC8372 1" Air Impact wrench Pin-LessNPT air inlet : 1/2"


Air Impact wrench


NC0415M8 NC0425M2 NC0415M41/2" Impact socket set - metric size with accessories- 15 pcs

O 1pc - 1/2" Air Impact Wrench (NC4131MA ou NC4216 ou NC4213A)

O 10 pcs - Impact sockets, 6 points, standard lengths : 9, 10, 11, 13, 14, 17, 19, 22, 24, 27mm

O 1pc - Extention bar : 125mm O 1pc - Allen Key : 4mm O 1pc - 1/4" Oiler O 1pc - 1/4" plug

NC0410M3141/2" Metric Impact socket set withaccessories- 10 pcs

O 1pc - 1/2" Air Impact Wrench (NC4258) O 5 pcs - Impact sockets, 6 points, standard length : 11, 13 mm, depp version : 17, 19, 21mm

O 1pc - Extention bar : 125 mm O 1pc - 1/4" Oiler O 1pc - 1/4" Plug O 1pc - Oil box (empty)

NC0615M01NC0615M33/4" Impact socket set - metric sizewith accessories - 15 pcs

O 1 pc - 3/4" Air Impact Wrench (NC6213 ou NC113A) O 8 pcs - Impact sockets, 6 points, standard length : 26, 27, 29, 30, 32, 35, 36, 38mm

O 1pc - Extention bar : 175mm O 1pc - Universal Joint O 2 pcs - Allen Key : 4 - 5mm O 1pc - 1/4" Oiler O 1pc - 1/4" Plug O 1pc - O-Ring&Pin

NC4131MA

NC0415M8

NC6113A

NC0615MO1

NC0415M4

NC4213A

NC4216

NC0425M2

881 Nm

610 Nm

813 Nm

1153 Nm

NC6213

NC0615M3

1627 Nm

NC4258

NC0410M314

542 Nm

CLEARANCE*

CLEARANCE*

* Limited stock


Air Impact wrench


NC4610MA1/2" impact wrench set with mini socket set - 8 pcs

O 1 pc - 1/2" Air Impact Wrench (NC4610) O 6 pcs - Mini Impact sockets, 6 points : 13 - 17 - 19 - 21 - 22 - 24 mm

O 1pc - 1/4" plug

SquareDrive

BoltCapacity

Torque Range

MaxTorque

FreeSpeed

AirConsumption

AirPressure

OverallLength

WeightAir

HoseSound

PressureVibration

Level

Inch mm Nm Nm R.P.M L/min bar mm kg Inch dBA m/s²

NC4131MA 1/2" 16 203-407 610 7 000 119 6.3 200 2.4 3/8" 95.1 2.7

NC4216 1/2" 16 244-542 881 9 000 119 6.3 195 2 3/8" 93.9 4.5

NC4213A 1/2" 16 244-542 813 6 500 119 6.3 182 2.8 3/8" 91.0 3.8

NC6113A 3/4" 25 203-814 1153 4 500 198 6.3 252 4.6 1/2" 94.3 7.2

NC6213 3/4" 27 271-1356 1627 6 000 195 6.3 239 3.88 1/2" 92.0 5.0

NC4210 1/2" 16 203-475 542 10 000 119 6.3 142 1.6 3/8" 90.6 2.8

NC4610 1/2" 16 271-475 610 9 000 124 6.3 115.5 1.6 3/8" 93.0 2.8

NC4230 1/2" 19 244-678 949 7 500 127 6.3 164 2.5 3/8" 87.0 4.5

O 1 pc - 1/2" Compact Air Impact Wrench (NC4230)

O 1 pc - 1/2" Air ratchet wrench "Push button" (NE432MA)

O 5 pcs - Impact sockets : 13 - 17 - 19 - 22 - 24 mm (MA420005)

O 2 pcs - 1/4" plug (SY251M)

1/2" air impact wrench foam set - torque wrench and accessories - 9 pcs

NC4230NE

NC4610

NC4610MA

610 Nm

NC4230

NC4230NE

949 Nm

81 NmNE432MA


Air Impact wrench


REF. AIR IMPACT WRENCH

REF. REPAIR KIT

NC4210 NC4210K01NC4230 NC4230K01NC6210 NC6210K01

Repair KitReplacement Parts

O 1 pc - 1/4" Air Impact Wrench (NC2710) O 5 pcs - 1/4" Long Sockets : 8 - 9 - 10 - 11 - 12 mm O 1 pc - 1/4" Extention Bar : 50 mm O 1 pc - 1/4" Drive Universal Joint : 37 mm O 1 pc - Plug (adapter)

NC0208M 1/4" pre-calibrated air impact wrench set for spark plugs - 9pcs

NPT air inlet : 1/4"Rocking Dog

SquareDrive

BoltCapacity

Torque RangeAir

ConsumptionAir

PressureOverallLength

WeightAir

HoseSound

PressureVibration

Level

Inch Nm R.P.M L/min bar mm kg Inch dBA m/s²

NC2710 1/4" 10-40 11 000 150 6.3 136 0.8 3/8" 91.0 3.4

NC2710

NC0208M


Air Impact wrench


Air ratchet wrench


MIGHTY SEVEN 13


Air ratchet wrench

MIGHTY SEVEN14 MIGHTY SEVEN14 No contractual pictures – Public prices in euro excl VAT - Offer valid until the 31/03/2015

NE211 1/4" Air ratchet wrench NE311 79 €

3/8" Air ratchet wrench NPT air inlet : 1/4"

NE432MA 1/2" Air ratchet wrench "Push button"NPT air inlet : 1/4"

NE251 1/4" Air ratchet wrench NE351 81 €


NE321 3/8" Air ratchet wrench NE421 76,29 €


NE332MA 3/8" Air ratchet wrench "Push button"


Air ratchet wrench

MIGHTY SEVEN 15MIGHTY SEVEN 15No contractual pictures – Public prices in euro excl VAT - Offer valid until the 31/03/2015

SquareDrive

Torque Range

MaxTorque

FreeSpeed

AirConsumption

AirPressure

OverallLength

WeightAir

HoseSound

PressureVibration

LevelPrice

Inch Nm Nm R.P.M L/min bar mm kg Inch dBA m/s² €

€NE211 1/4" 6.7-20 24 240 84.96 6.3 205 0.59 3/8" 89.6 3.9

NE311 3/8" 6.7-20 24 240 84.96 6.3 205 0.59 3/8" 88.8 4.6

NE251 1/4" 6.7-20 30 350 84.96 6.3 125 0.5 3/8" 89 4.4

NE351 3/8" 6.7-20 30 350 84.96 6.3 125 0.5 3/8" 89 4.4

NE321 3/8" 13.5-47 68 160 113.28 6.3 265 1.04 3/8" 91 3.9

NE421 1/2" 13.5-47 68 160 113.28 6.3 265 1.04 3/8" 92.8 4.6

NE332MA 3/8" 10-45 81 160 113.28 6.3 265 1.22 3/8" 90.5 4.4

NE432MA 1/2" 10-45 81 160 113.28 6.3 265 1.22 3/8" 89.8 5.2

NE461 1/2" 13.5-88 135.6 180 113 6.3 270 1.2 3/8" 83 2.3 ---

NE499 1/2" 68-203 339 7 500 69.4 6.3 340 18.3 3/8" 93 9.9 ---


NE04131/2'' Air torque wrench and accessories set - 13 pcs

O 1 pc - 1/2" Air ratchet wrench (NE461) O 8 pcs - Impact sockets, 6 points - 8 - 9 - 10 - 12 - 13 - 14 - 17 - 19 mm

O 1 pc - Extension Bar 75 mm O 2 pcs - 1/2" & 3/8" ADP O 1 pc - 1/4" Plug


NE499AN041/2'' Impact Ratchet and accessories - 11 pcs

O 1 pc - 1/2" Air ratchet wrench (NE499) O 9 pcs - Impact sockets, 6 points : 9 - 10 - 11 - 13 - 14 - 17 - 19 - 22 - 24 mm

O 1 pc - 1/4" Plug

O 1 pc - 3/4" Compact Air Impact Wrench (NC4230)

O 1 pc - 1/2" Air ratchet wrench "Push button" (NE432MA)

O 5 pcs - Impact sockets : 13 - 17 - 19 - 22 - 24 mm (MA420005)

O 2 pcs - 1/4" Plug (SY251M)

1/2" air impact wrench foam set - torque wrench and accessories - 9 pcs

NC4230NE

NC4230

NC4230NE

949 Nm

81 NmNE432MA

NE499

NE499AN04

339 Nm

NE461

NE0413

135.6 Nm


Air Die Grinder


Air Die Grinder


MIGHTY SEVEN16


Air Die Grinder


QA111A

Straight air die grinder NPT air inlet : 1/4"

QA315


QA313A


QA211A


QA311A


ColletSize

FreeSpeed

AirConsumption

AirPressure

OverallLength

Motor WeightAir

HoseSound

PressureVibration

LevelPrice

mm R.P.M L/min bar mm HP kg Inch dBA m/s² €

hp €QA111A 6 & 3 25 000 283 6.3 155 0.3 0.38 3/8" 81.5 1.8

QA211A 6 & 3 20 000 283 6.3 190 0.9 0.65 3/8" 75.7 0.8

QA311A 6 & 3 25 000 283 6.3 190 0.3 0.48 3/8" 81.5 1.8

QA315 6 & 3 25 000 283 6.3 280 0.3 0.63 3/8" 81.5 1.8

QA313A 6 & 3 25 000 283 6.3 235 0.3 0.58 3/8" 81.5 1.8

QA611A 6 & 3 19 000 283 6.3 160 0.3 0.51 3/8" 74.4 1.7


QA611A

Air Die Grinder (90° angle head)


Air Die Grinder


AccessoRIes

QA0215A Air Die Grinder set with accessories - 15 pcs

O 1 pc - Air Die Grinder (QA211A) O 1 pc - Collet 3 mm (1/8") and 6 mm (1/4") O 2 pcs - Spanner Wrench O 5 pcs - Grinder Stone 3 mm (1/8") : W145 - W153 - W163 - W170 - W176 O 5 pcs - Shank stone (6 mm - 1/4"): W220 - W187 - A22 - A12 - A5 O 1 pc - 1/4" Plug (adapter)

Air Grinder and accessories set - 7 pcs

O 1 pc - Air Die Grinder (QA210A) O 5 pcs - Shank stone (6 mm - 1/4") : W220 - W187 - A22 - A12 - A5 O 1 pc - 1/4" Plug (adapter)

QA0207

QB9211

Grindstone for clips 3 mm

O Grindstone with 3 mm stems : O W145 - W153 - W163 - W170 - W176

QB9213

Grindstone for clips 6 mm

O Grindstone with 6 mm stems : O W220 - W187 - A22 - A12 - A5

QA211A

QA0215A

QA210

QA0207

ColletSize

FreeSpeed

AirConsumption

AirPressure

OverallLength

Motor WeightAir

HoseSound

PressureVibration

Level

mm R.P.M L/min bar mm HP kg Inch dBA m/s²

hpQA111A 6 & 3 25 000 283 6.3 155 0.3 0.38 3/8" 81.5 1.8

QA210A 6 20 000 283 6.3 190 0.9 0.65 3/8" 75.7 0.8


Air Die Grinder


ColletSize

FreeSpeed

Bolw PerMinute

AirConsumption

AirPressure

OverallLength

HoseLength

WeightAir

HoseSound

PressureVibration

LevelPrice

mm R.P.M bpm L/min bar mm mm kg Inch dBA m/s² €

bpm €QA412 3 60 000 --- 76 6.3 170 1 500 0.24 3/8" 70 0.5

QA421 3 60 000 --- 76 6.3 150 1 500 0.22 3/8" 70 0.5

QA432 3 70 000 --- 29 6.3 137 1 425 0.20 3/8" 70 0.5

QA511 --- --- 13 000 29 6.3 140 1 420 0.23 3/8" 78 0.6

QA412

Micro Air Die Grinder NPT air inlet : 1/4"

QA421


QA432


QA511

Engraving Pen NPT air inlet : 1/4"


Air angle grinder


Air angle grinder


MIGHTY SEVEN20


Air angle grinder


Air angle grinder Roll Type ThrottleNPT air inlet : 1/4"

QB104 QB105 Air angle grinder

Roll Type ThrottleNPT air inlet : 1/4"

QB107

Air angle grinder Lever Type ThrottleNPT air inlet : 1/4"

QB114QB115


QB117MAAir angle grinder Lever Type Throttle Air angle grinder

Lever Type ThrottleNPT air inlet : 1/4"

QB124 QB125 Air angle grinder

Lever Type ThrottleNPT air inlet : 1/4"

QB7115S

Paddiameter

SpindleSize

FreeSpeed

AirConsumption

AirPressure

OverallLength

Motor WeightAir

HoseSound

PressureVibration

LevelPrice

mm (Inch) mm (Inch) R.P.M L/min bar mm HP kg Inch dBA m/s² €

hp €QB104 100 (4") 24 (3/8") 11 000 170 6.3 226 0.78 1.81 3/8" 87.8 1.2

QB105 125 (5") 24 (3/8") 11 000 170 6.3 226 0.78 1.81 3/8" 87.1 1.2

QB107 178 (7") --- 7 000 255 6.3 290 1 3.24 1/2" 89.7 1

QB114 100 (4") 24 (3/8") 11 000 170 6.3 230 0.78 1.81 3/8" 87.8 1.2

QB115 125 (5") 24 (3/8") 11 000 170 6.3 230 0.78 1.81 3/8" 87.1 1.2

QB117MA 178 (7") --- 7 000 255 6.3 343 1 3.24 1/2" 89.7 1

QB124 100 (4") 24 (3/8") 11 000 170 6.3 230 0.8 1.73 3/8" 85.7 1.2

QB125 125 (5") 11 (5/8") 11 000 170 6.3 230 0.8 1.78 3/8" 87 1.2

QB7115S 125 (5")11 (5/8")

M14*P2.011 000 119 6.3 232 1.3 1.81 3/8" 90 1.2

The grinding weel is not supplied along with the tool


Air angle grinder


AccessoRIes

Air angle grinderQC234


QB903 Grinding disc 75 mm

QB904 Grinding disc 100 mm (4")



Air Cut-off toolQC213


Paddiameter

SpindleSize

Thickness Compatible with Price

mm (Inch) mm mm €

€QB903 75 (3") 75x1.5x10 QC213

QB904 100 (4") 16 6 QB104 / QB114 / QB124

QB905 125 (5") 22 6 QB105 / QB115 / QB125 / QB7115

QB907 180 (7") 22 6 QB107 / QB117

Paddiameter

SpindleSize

FreeSpeed

AirConsumption

AirPressure

OverallLength

Motor WeightAir

HoseSound

PressureVibration

LevelPrice

mm (Inch) mm R.P.M L/min bar mm HP kg Inch dBA m/s² €

hp €QC234 100 (4") 10 / 16 16 000 283 6.3 355 0.9 1.59 3/8" 85 5 206 €

QC213 75 (3") 10 20 000 283 6.3 200 0.9 0.86 3/8" 80.2 10.8 61 €

The grinding weel is not supplied along with the tool

206 € 61 €


Air Sander


Air SanderComplete air tool solutions

MIGHTY SEVEN 23


Air Sander


QB311

Air Belt Sander NPT air inlet : 1/4"

QB312

Air Belt Sander NPT air inlet : 1/4" Air Random Orbital

Sander, Non-VacuumNPT air inlet : 1/4"

QB42502QB42602

Air Random Orbital Sander, Non-Vacuum

Air Random Orbital Sander, Non-Vacuum

QB41902MA Air Random Orbital Sander central-vacuum

NPT air inlet : 1/4" NPT air inlet : 1/4"NPT air inlet : 1/4"

QB46502 QB52502QB46602 QB52602

QB45602 Air Random Orbital Sander central-vacuum NPT air inlet : 1/4"

QB54602

Air Random Orbital Sander central-vacuum NPT air inlet : 1/4"

Air Random Orbital SanderSelf-Generated, Central-Vacuum*NPT air inlet : 1/4"

QB43802QB43902

Air Pressure : 6.3 bar Air Hose : 3/8"Sandpaper / Abrasive strip not included


Air Sander


*Tuyau d'aspiration inclus



QB53802QB47602QB53902QB47612 QB59602

Air Random Orbital Sander Self-Generated, Central-Vacuum* NPT air inlet : 1/4"

QB48111

Air Jitterbug Sander NPT air inlet : 1/4"

QP113

Mini Polisher NPT air inlet : 1/4"

QP123

Mini polisher NPT air inlet : 1/4"

5Belt size

Paddiameter

Nombre de trous

OrbitFree

SpeedAir

ConsumptionOverallLength

Motor WeightSound

PressureVibration

LevelPrice

mm mm (Inch) mm R.P.M L/min mm HP kg dBA m/s² €

hp €QB311 10x330 --- --- --- 16 000 226 290 --- 0.8 89.7 0.5

QB312 20x520 --- --- --- 16 000 254 360 --- 1.2 91.8 0.4

QB42502 --- 127 (5") --- 5 10 000 109 153 0.24 0.81 75.7 0.6

QB42602 --- 152 (6") --- 5 10 000 109 166 0.24 0.85 74.4 1.3

QB46502 --- 127 (5") --- 5 10 000 109 153 0.24 0.79 80.1 7.1

QB46602 --- 152 (6") --- 5 10 000 109 166 0.24 0.79 80.1 7.1

QB52502 --- 127 (5") --- 5 10 000 170 153 0.24 1 87.6 1.2

QB52602 --- 152 (6") --- 5 10 000 170 166 0.24 1.2 87.6 1.7

QB41902MA --- 152 (6") 6 5 10 000 109 206 0.24 0.91 81.5 0.8

QB45602 --- 152 (6") 15 5 10 000 109 193 0.24 0.84 81.6 7.1

QB54602 --- 152 (6") 6 5 10 000 85 210 0.24 0.78 81.6 7.1

QB43802 --- 127 (5") 6 5 10 000 109 206 0.24 1.49 83.9 1.3

QB43902 --- 152 (6") 6 5 10 000 109 221 0.24 1.54 83.0 1.4

QB47602 --- 152 (6") 6 5 10 000 109 193 0.24 1.13 84.7 7.1

QB47612 --- 152 (6") 6 2.5 10 000 109 193 0.24 1.13 84.7 7.1

QB53802 --- 127 (5") 6 5 10 000 170 153 0.24 1 86.2 0.5

QB53902 --- 152 (6") 6 5 10 000 170 166 0.24 1.2 80.1 1.2

QB59602 --- 152 (6") 6 5 10 000 88 240 0.24 1.2 80 0.8

QB48111 100x110 --- --- 2.5 11 000 198 130 0.28 0.91 83 1.5

QP113 --- 76 (3") --- 2.5 15 000 99 127 0.4 0.72 74 0.3

QP123 --- 76 (3") --- --- 2 100 99 135 0.4 0.77 74 0.3


Air Sander


QB46602AJCSander and air gun foam set - 6 pieces

O 1 pc - Air Random Orbital Sander 152 mm (QB46602) + 1 Disk mounting (0 holes) O 1 pc - 360° Extensible progressive air blow gun 165 ~ 304 mm (JC507) O 2 pcs : Disk mountings (0 holes) O 2 pcs - 1/4" Plug (adapter) (SY-251M) O 1 pc - Steel Wrench

Sander, tray and Air gun foam set - 6 pieces

O 1 pc - Air Random Orbital Sander central-vacuum 152 mm (QB54702) + 1 Disk mounting (15 holes) O 1 pc - 360° Extensible progressive air blow gun 165 ~ 304 mm (JC507) O 1 pc - 15 holes disk mounting O 2 pcs - 1/4" Plug (adapter) (SY251M) O 1 pc - Steel Wrench

QB54702AJC04

Sander, tray and Air gun foam set - 6 pieces

O 1 pc - Air Random Orbital Sander central-vacuum (QB47702) + 1 Disk mounting (15 holes) O 1 pc - 360° Extensible progressive air blow gun 165 ~ 304 mm (JC507) O 1 pc - 15 holes disk mounting O 2 pcs - 1/4" Plug (adapter) (SY251M) O 1 pc - Steel Wrench

QB47702AJC04

O 1 pc - Mini Polisher 15000 RPM (QP113) O 1 pc - Mini Polisher 2100 RPM (QP123) O 2 pcs - 1/4" Plug (adapter) (SY251M) O 1 pc - Ultrathin polishing foam O 1 pc - Polishing foam O 2 pcs - Steel Wrench

Polycarbonate headlight renovation foam set sander and polisher - 8 pieces

QP123AQP04


Air Sander


AccessoRIes QB9108

Sanding belt (Packs of 10)

Reference

QB91108 10m x 330mm 80gQB311

QB91208 20m x 520mm 80g

QB91110 10m x 330mm 100g

QB91210 20m x 520mm 100g

Dimensions Compatible with

QB321

QB9403

Polishing foam & Pad

QB9403Rough 3" (75mm)For QP113

QB9323Velcro Pad (3" 75mm)For QP113 & QP123

QB9413Medium 3" (75mm)For QP123

QB9327 150 mm orbital sanders tray 15 holes 6’’

QB9413 QB9323

QB9110 QB9208 QB9210


Air Screwdriver


Air ScrewdriverComplete air tool solutions

Twin Dog Twin Hammer Adjustable Clutch Shut-off Screwdriver

MIGHTY SEVEN28


Air Screwdriver


ChuckSize

TorqueRange

FreeSpeed

AirConsumption

OverallLength

WeightSound

PressureVibration

LevelPrice

Inch (mm) Nm R.P.M L/min mm kg dBA m/s² €

€RA101A 1/4" (6.35) 5-12 9 000 170 166 0.6 85.7 2.2

RA102A 1/4" (6.35) 5-14 9 000 170 172 0.7 86.7 3.7

RA105 1/4" (6.35) 5-22 8 500 241 208 1 96.7 4.9

RA606 1/4" (6.35) 5-45 8 000 160 198 1 82 2.2

RA608 1/4" (6.35) 5-58 8 000 130 217 1.3 86 3.5

RA3023 1/4" (6.35) 0.4-1.0 2300 90.2 187 0.42 70 2

RA301 1/4" (6.35) 5-13.5 1 800 170 190 1.1 95.3 4.2

RA302 1/4" (6.35) 5-16.3 800 170 226 1.3 96.5 2.2

RA201A 1/4" (6.35) 5-25 10 000 255 180 1.2 93 5.3

RA101A Air straight screwdriver Twin Dog

RA102A Air straight screwdriver Twin Dog

RA105 Air straight screwdriver Twin Dog

RA201AAir Screwdriver

NPT air inlet : 1/4"Twin Hammer

RA302RA301 Air Screwdriver Ajustable

Air Screwdriver Ajustable

NPT air inlet : 1/4" NPT air inlet : 1/4"Adjustable Clutch Adjustable Clutch


RA606 Air straight screwdriver Twin DogNPT air inlet : 1/4"

RA608 Air straight screwdriver Twin DogNPT air inlet : 1/4"

RA3023 Visseuse droite ajustable à embrayage Shut-off ScrewdriverNPT air inlet : 1/4"

NPT air inlet : 1/4" NPT air inlet : 1/4"

Air Pressure : 6.3 bar Air Hose : 3/8"


Air Drill


Air DrillComplete air tool solutions

MIGHTY SEVEN30


Air Drill


QE131AAir reversible drill with keyless chuck

QE343

Air reversible drill with key chuck

QE333

Air reversible drill with key chuck

QE331Air reversible drill with keyless chuck

ChuckSize

FreeSpeed

AirConsumption

OverallLength

Moteur WeightSound

PressureVibration

LevelPrice

mm R.P.M L/min mm HP kg dBA m/s² €

hp €QE231 8 1 600 170 235 0.5 2 88.2 ---

QE131A 10 (3/8") 1 800 141 230 0.5 1.25 91.6 ---

QE331 10 (3/8") 1 800 184 203 --- 1.1 96.5 0.3

QE332 10 (3/8") 2 200 184 190 --- 1 96.5 0.3

QE333 10 (3/8") 1 800 184 203 --- 1.1 92 0.2

QE334 10 (3/8") 2 200 184 190 --- 1 92 0.2

QE341 13 (1/2") 800 184 230 --- 1.8 96.5 0.1

QE343 13 (1/2") 800 184 230 --- 1.8 97.5 0.1

QE344 13 (1/2") 800 184 209 --- 1.7 97.5 0.1

QE231

Spot drill & hook NPT air inlet : 1/4"


QE332 Air drill with Keyless Chuck NPT air inlet : 1/4"

QE344 Air drill with key chuck NPT air inlet : 1/4"

QE341

Air reversible drill with keyless chuck NPT air inlet : 1/4"

QE334 Air drill with key chuck NPT air inlet : 1/4"


CLEARANCE*CLEARANCE*

* Limited stock


Air Hydraulic Riveter




MIGHTY SEVEN32




PA201 RiveterNPT air inlet : 1/4"


PA301 RiveterNPT air inlet : 1/4"

PB2402 Inserts riveter NPT air inlet : 1/4"

PA202 PA9048PA9064

PB9006PB9010Air Hydraulic Riveter

in vacuum Rivet adaptor for screw gun

Rivet adaptor for screw gun

CapacityStrokeLength

Tractionpower

AirConsumption

Minimum power

Free speed

Dimensions WeightSound

PressureVibration

LevelPrice

mm mm kg.-f L/min Nm R.P.M mm kg dBA m/s² €

€PA201 2.4~6.4 14 1603 65 --- --- --- 1.8 79.7 0.5

PA301 2.4~4.8 16 1045 41 --- --- --- 1.5 79.7 0.3

PB2402Acier M4~M10Inox M4~M8

9 1650 42 --- --- --- 1.55 82 0.8

PA202 3.2~6.4 14 1200 50 --- --- --- 1.91 73.6 0.3

PA9048 2,4 - 3,2 - 4 - 4,8 --- --- --- 11 1 000 59x158 0.318 --- ---

PA9064 3,2 - 4 - 4,8 - 6,4 --- --- --- 50 1 000 59x173 0.33 --- ---

PB9006 M3 - M4 - M5 - M6 --- --- --- 15 1 000 59x172 0.28 --- ---

PB9010 M6 - M8 - M10 --- --- --- 100 800 59x180 0.35 --- ---



Air Shear and Air Saw


Air ShearAnd Air Saw


MIGHTY SEVEN34


Air Shear and Air Saw


Ø 4.0mm

QG103

NibblerNPT air inlet : 1/4"

QG102

Air shear straight NPT air inlet : 1/4"

QD221 Air Saw With HoseNPT air inlet : 1/4"5 piece file set and 2 saw blades included

AccessoRIes

QD924

QD932

10 blades set

10 blades set

O Delivered by 10 blades set O 24 Teeths O HSS Blade O Design to cut hardened steel

O Delivered by 10 blades set O 32 Teeths O HSS Blade O Design to cut hardened steel

O Denture : 10 teeth/cm O Length : 90 mm O Weight : 42 g

O Denture : 13 teeth/cm O Length : 90 mm O Weight : 42 g

Cutting capacity

Diameter ThicknessStorke length

Free speed

Diamètre Pinces

AirConsumption

Length WeightSound

PressureVibration

LevelPrice

mm mm mm mm S.P.M mm L/min mm kg dBA m/s² €

⊄ ∅ ≡ ⇒ S.P.M €QD221 1.6 --- --- 10 5000 4.0 113 250 0.8 81.9 4.1

QG102Stainless steel : 1

Steel : 1.2Aluminum : 1.6

--- --- --- 2600 --- 170 254 1 85.8 2.4

QG202Stainless steel : 1

Steel : 1.2Aluminum : 1.6

--- --- --- 2600 --- 184 210 1.1 89.1 2.9

QG103 1.6 4,5 2 --- 2 600 --- 85 193 1 88 1.6


QG202

90° Air shear NPT air inlet : 1/4"


Air Hammer

MIGHTY SEVEN36 MIGHTY SEVEN36 MIGHTY SEVEN36 No contractual pictures – Public prices in euro excl VAT - Offer valid until the 31/03/2015

Air Hammer

36


MIGHTY SEVEN36


Air Hammer

MIGHTY SEVEN 37MIGHTY SEVEN 37MIGHTY SEVEN 37No contractual pictures – Public prices in euro excl VAT - Offer valid until the 31/03/2015

NPT air inlet : 1/4" NPT air inlet : 1/4"

SC342C Air hammer hex shank NPT air inlet : 1/4"


SC211C Air hammer round shank

SC221C Air hammer hex shank

SC222C Air hammer hex shank

SC0617C Chipping hammer kit with accessories - 7 pcs

O 1 pc - Air hammer hex shank (SC221C) O 5 pcs - Hex 5 chisels set (SC425) O 1 pc - Retaining spring chisels

ShankChuskSize

Stroke Length

Bolw PerMinute

AirConsumption

OverallLength

WeightSound

PressureVibration

LevelPrice

mm mm bpm L/min mm kg dBA m/s² €

↔ bpm €SC211C 10.2 67 3200 113 175 1.7 98 12.3

SC221C 10 67 3200 113 175 1.7 98 12.3

SC222C 10 89 2200 113 225 2 94.7 13.2

SC342C 10 92 2200 113 228 2 94.7 10.6

SC823 10 --- 4600 70.6 150 0.78 105 3.7

SN1032 13 33 4000 120 290 1.33 91 14.5

With 5 Hex chisels With 5 Hex chisels


SN1032 Quick release air chipper

With 1 Hex chisel

SC823 Mini burineur à burins hexagonaux NPT air inlet : 1/4"With 4 Hex chisels



Air Hammer

MIGHTY SEVEN38 MIGHTY SEVEN38 MIGHTY SEVEN38 No contractual pictures – Public prices in euro excl VAT - Offer valid until the 31/03/2015

AccessoRIes

O Tail pipe cutter O Ripping Chisel O Tapered punch O Cutting chisel O Flat chisel

SC415MA Round 5 chisels set

SC425

Hex 5 chisels set

Chisel Flat

SC4202 Chisel Sheet metal cutter

Chisel Punch

SC4204 Chisel Welding spot cutter

SC4205 Chisel Sheet metal cutter with 2 cutting edge

SC4101

SC4201

SC4203

Needle ScalerNPT air inlet : 1/4"

SN1288

SN288

Spare needleO Adapted for the needle scaler SN1288

NeedleDiameter

Numbers of Needle

StrokeLength

Bolw PerMinute

AirConsumption

OverallLength

WeightSound

PressureVibration

LevelPrice

mm mm bpm L/min mm kg dBA m/s² €

↔ bpm €SN1288 3x125 12 32 5 500 84.96 288.9 1.3 86 7.6



Auto Repair Tool


Auto Repair Tool


MIGHTY SEVEN 39


Auto Repair Tool


AccessoRIes

QB802Air Scrubber

FreeSpeed

AirConsumption

AirPressure

OverallLength

Motor WeightAir

HoseSound

PressureVibration

Level

R.P.M L/min bar mm HP kg Inch dBA m/s²

hpQB802 3600 300 6.3 200 0.7 1.2 3/8" 86 0.3

SK1010 --- 113 3.4~4.8 305 --- 1.1 3/8" --- ---

Metal scrubQB9401

O Compatible with QB802

Rubber brushQB802P49

Cartridge gunSK1010

SR1101AAirbrush set

QB0808M Air scrubber and accessories set - 6 pc

O 1 pc : Air Scrubber 3600 RPM (QB802) O 1 pc : Rubber brush (QB9414) O 1 pc : Scouring wheel (QB9415) O 1 pc : Straight metal brush (QB9412) O 1 pc : Hooked metal brush (QB9411) O 1 pc : 1/4" Plug (adapter) (SY251M)

PRICE CATEGORY A


Auto Repair Tool


MaxPressure

Storkes perminute

AirConsumption

AirPressure

WeightAir

HoseSound

PressureVibration

LevelNozzle Length Nozzle

bar S.P.M L/min bar kg Inch dBA m/s² dBA

MAX S.P.M

SB201 11 --- 39 6.3 0.32 3/8" --- --- 30 Type valve clip

SB215 11 --- 39 6.3 0.32 3/8" --- --- 150 Type valve clip

QK111 --- 20 000 170 6.3 1.1 10 75 3.9 --- ---

QK111 Air Windshield Knife NPT air inlet : 1/4"

QK111P54 QK111P50 QK2036

QK2063 QK2090

U shape blade

Curved blade Inclined U shape blade

Straight blade

AccessoRIes O Adaptable for the air windshield knife QK-111

18 mm

48 mm 54 mm57 mm

36 mm

36 mm63 mm 90 mm

QK111P51

QK111P08

QK111P52

SB201 Digital tire inflator 30 cm NPT air inlet : 1/4"

SB215 Digital tire inflator 150 cm NPT air inlet : 1/4"

CLEARANCE*

* Limited stock


Auto Repair Tool


O 1 pc - Air power brake caliper O 16 pcs - Adapters for disc brakes (right and left gage)

SQ0217Air powered Brake Caliper wind back 17 pcs

O 1 pc - Air powered brake caliper O 1 pc - Adapter : SAAB - HONDA - Alfa Romeo - AUDI - VW - Lancia O 1 pc - 3/8"Adapter N° 5 O 1 pc - 1/4" Plug (adapter)

SQ0104Air powered Brake Caliper Set - 4 pcs

SC005 Ball joint & tie-rod splitter set - 5 pcs

O 1 pc - Steering ball joint arm - 17mm O 1 pc - Steering ball joint arm - 23mm O 1 pc - Pitman arm - 28mm O 1 pc - Air Hammer Adapter - 184mm O 1 pc - Air Hammer adapter Ø10,2 mm


Auto Repair Tool


SM0502

Brake Fluid Extractor 2LSM0901

Brake Fluid Extractor 9L

QM1125

Pneumatic bellows spreader NPT air inlet : 1/4" SX2101

Air cleaning gun NPT air inlet : 1/4"

FreeSpeed

AirConsumption

AirPressure

OverallLength

Bellows diameter

Weight CapacityAir

HoseSound

Pressure

R.P.M L/min bar mm mm kg L Inch dBA

∅SM0502 --- 166 4,8 - 11,6 350 --- 2.5 2 --- ---

SM0901 --- 166 4,8 - 11,6 640 --- 4.7 9 --- ---

QM1125 --- --- 6.3-8.6 442 25-110 3.25 --- 3/8" ---

SX2101 5 500 56.6 6.3 210x110 --- 0.78 --- 3/8" 85


Filter Regulator - Lubricator


Filter Regulator LubricatorComplete air tool solutions

MIGHTY SEVEN44


Filter Regulator - Lubricator


Lubricator

SV1310

Air in / outlet : 3/8"

SV2330


SV1210


SV2230


SV2431 €

Air in / outlet : 1/2"Filter Regulator Lubricator

Oil bowl capacity

WorkingPressure

Air Pressure

Working temperature

Min. flowfor oil drip

Weight Price

cc kgf/cm² bar °C L/min kg €

Working €SV1210 50 --- 15 5~60° 50 0.3

SV1310 50 --- 15 5~60° 60 0.3

SV2230 50 0-9.9 15 5~60° 50 0.7

SV2330 50 0-9.9 15 5~60° 60 0.7

SV2431 50 0-15 20 5~60° 80 1.5

SW13A 3/8" Mini Lubricator NPT air inlet : 3/8"

SW12A 1/4" Mini Lubricator NPT air inlet : 1/4"

Pneumatic oilSGU202

SG101 Lubrication kit

CLEARANCE*

* Limited stock


Air grease gun


Air grease gun


MIGHTY SEVEN46


Air grease gun


WorkingPressure

MaxPressure

Capacity WeightAir

HoseSound

PressureVibration

LevelPrice

bar bar C.C kg Inch dBA m/s² €

MAX €SG401 2.8 - 8.24 10.5 400 1.6 3/8" 74 2

SG400 2.8 - 8.24 10.5 400 1.46 3/8" 80.2 0.7

SG400C 2.8 - 8.24 10.5 400 1 3/8" 81.4 0.6

SG401 Grease gun NPT air inlet : 1/4"

SG400C

Composite grease gun NPT air inlet : 1/4"

SG400 Grease gun NPT air inlet : 1/4"

accessory

SG212

Flexible tube O 300 mm flexible tube O For SG401


Autre


Air blow gunReel Air hose / Recoil Air hose / BalancersMounting / Socket setAir Adaptor


various

MIGHTY SEVEN48


Air blow gun



JC304

Air progressive blow gun

Nozzle length

WorkingPressure

MaxPressure

AirConsumption

WeightAir

HoseSound

PressurePrice

mm (inch) bar bar L/min L/min Kg Inch dBA €

Working MAX 1/4''Hous

3/8''Hous €

JC304 100 (4") 5.3 - 8.5 10.6 368 425 0.07 3/8" 90.0

JC310 250 (10") 5.3 - 8.5 10.6 368 425 0.10 3/8" 90.0

JC313 325 (13") 5.3 - 8.5 10.6 368 425 0.11 3/8" 90.0

JC320 500 (20") 5.3 - 8.5 10.6 368 425 0.14 3/8" 90.0

JC340A 1000 (40") 5.3 - 8.5 10.6 368 425 0.23 3/8" 90.0

JC507 165~304 (6-1/2''~12'') 6.2 - 8.5 15.1 368 425 0.22 3/8'' 75.0

JC440 1040 (40") 5.3 - 8.5 10.6 368 425 0.42 3/8" 90.0

Accessories

JC291

Standard safety tipCompatible with JC304 / JC310 / JC313 / JC320

JC507 360° progressive air blow gun NPT air inlet : 1/4"

JC440 High capacity Blowgun NPT air inlet : 1/4"

Retractable

JC310JC313 JC320

JC340A


No contractual pictures – Public prices in euro excl VAT - Offer valid until the 31/03/2015


Reel Air hose / Recoil Air hose / Balancers


Air hose reel

SA215BSA315D

Extention spiral bound

SD23110SD23115SD23210

SD23215SD23315SD24415

Hose inside diameter

Hose outside diameter

Hose Length

Working pressure

Break Pressure

Male PT Fitting

Weight Price

mm mm M bar kg/cm² inch kg €

€SA215B 8 12 15 7 20 1/4" 5.3

SA315D 10 15 15 7 20 3/8" 8

SD23110 8 12 10 7 20 1/4" 0.5

SD23115 8 12 15 7 20 1/4" 1.35

SD23210 5 8 10 7 20 1/4" 0.935

SD23215 5 8 15 7 20 1/4" 0.65

SD23315 10 15 15 7 20 3/8" 0.65

SD24415 13 18 15 7 20 1/2" 0.65

129,90 €

208 € 48 €17 €

38 €

26 €

44 €

21 €

SP104

BalancersSP105

Capacity Travel Rope Rope Dia Weight Price

kg m m mm kg €

€SP104 1.5~3.0 1.5 Cable 3.2 0.76

SP105 3.0~5.0 1.5 Cable 3.2 0.81



Mounting / Socket set


SH1001

Magnetic mounting for 1/2" air tools

SH1002

Magnetic mounting for 3/4" air tools

MA42006M 6 mini impact sockets set - 6 pcs

O 13 - 17 - 19 - 21 - 22 -24 mm



Air Adaptor


1/4" Air coupler thread female

Raccord taraudé femelle à decompression 1/4"

1/4" Articulated regulator coupling

3/8" Air adaptor thread male


Raccord taraudé femelle à decompression 1/2"


Raccord fileté mâle à decompression 1/4"

1/4" Air Coupler thread male

SY230F

SY271F

SY2002M

SY351M

SY471M

SY471F

SY251M

SY271M

SY250M

O Passage 8mm O ISO 6150


SY2001M 1/4" Articulated coupling O 360° rotation

O 360° rotation



PRICE CATEGORY A

PRICE CATEGORY A

PRICE CATEGORY A PRICE CATEGORY A


1/4" Air adaptor thread female

SY261MSY261F

O ISO 6150B O EuropeanSold by 2 Sold by 2


Autre


Power TOOLSCORDLESS

new range2014

Electric tool solutions

COMFORTSTURDINESS

PRECISIONDURABILITY

LIGHTNESSPOWER

MIGHTY SEVEN 53


Power tools - CORDLESS

Johnson Electric Motor

LITHIUM-IONBATTERY

Light, power ful, efficient...

it has everything you're looking for!

All of the M7 power tools are equippedwith a Johnson Electric motor, lithium-ionbatteries and are supplied with a highperformances ventilated charger

Johnson Electric MotOR

The high voltage DC range provides power density and space saving advantages versus traditional AC motors in similar applications

Johnson Electric is the world leader in micromotors. The Johnson Electric DC motor series is the industry benchmark for micro motor driven actuation

60% lighter than a Ni-Cd battery with similar power

Zero memory accumulation which allows to charge the battery at any time, even if not empty, without negative effects

LIGHT

CONVENIENT

NO CHARGE MEMORY

M7 LITHIUM-ION BATTERY

Unique batteries fitting system

Batteries with integrated charging indicator(4 LEDs lights)

100% charged within 50min maximum

Very slow discharging when the battery is not used

Unlike with the Ni-Cd batteries, the power of the tool does not decrease with the charge. The tool keeps its full power all along

LONG LASTING ENERGY STORAGE

POWERFUL

FAST CHARGING TIME

WITH CHARGING CONTROL

1.3 Ah and 2.6 Ah batteries are compatible with all the models of our range

COMMUTABLE

4 markers to know the exact statusof the battery: temperature too low ortoo high / defective battery / batterycharging / full battery

Which increase the batteries' lifetime

WITH CHARGING INDICATOR

NO OVERHEATING

M7 VENTILATED CHARGER

MIGHTY SEVEN 54Photo non contractuelles – Offre valable jusqu’ au 31/03/2015

No contractual pictures – Offer valid until the 31/03/2015



MIGHTY SEVEN54



55

O Equipped with a Johnson Electric motor to develop great power, this type of machine is designed for screwing and drilling works in all kind of materials

SPECIFICATIONS

PowerMAX

TorqueKeylesschuck

Unladen speedLOW

Unladen speedHIGH

Length Height Weight

H

DD18132A 1,3 Ah 20 V 52 Nm 13 mm 350 RPM 1300 RPM 23 cm 23 cm 2,5 Kg

DH18262A 2,6 Ah 20 V 67 Nm 13 mm 350 RPM 1300 RPM 27 cm 25 cm 2,55 Kg

DH18262A

CONTENT

3 MODES :- SCREWDRIVER- DRILLER- PERCUSSIONS

2 MODES :- SCREWDRIVER- DRILLER

24 CLUTCHPOSITIONS

23 CLUTCHPOSITIONS

ROHM CHUCK

1,3 Ah20 V

DD18132A52 Nm

13 MM KEYLESS CHUCK drillers

1 Driller1 Removable handle2 Li-ion batteries1 Ventilated charger

67 Nm

2,6 Ah20 V

IntegratedLED light

Speed trigger Reverse button on the sides

Easy accessselector

Low/highbutton

Keyless and self-locking

DEPTH GAUGE

Reversiblehandle

MIGHTY SEVEN 55No contractual pictures – Offer valid until the 31/03/2015



DS18132A

6 POINTS FITTING1/4" (6,35MM)

1/4"

SPECIFICATIONS

PowerUnladenspeed

Blows/MinMAX

TorqueBoltssizes


bpm H

DS18132A 1,3 Ah 20 V 2500 RPM 3200 BPM 160 Nm M6 – M18 18 cm 24 cm 1,90 Kg

O Optimal balance of the machine

O Equipped with a Johnson

Electric motor to develop great

power, and with an antifeedback

security system

O The machine is ideally suited to

series fastening works, including

large diameters such as lag

bolts

1,3 Ah20 V

1/4" POWER SCREWGUN

Anti-feedbacksecurity system

CONTENT1 Screw gun2 Li-ion Batteries1 Ventilated charger

160 Nm

Integrated LED light

Reverse button on the sides

Compact design

MIGHTY SEVEN56 No contractual pictures – Offer valid until the 31/03/2015



Photo non contractuelles

IMPACT MECHANISM:PIN CLUTCH SYSTEM

DW18262A

Squaredrive

PowerUnladenspeed

Blows/minMAX

TorqueBoltssizes


bpm H

DW18262A 1/2" 2,6 Ah 20 V 19000 RPM 22000 BPM 1220 Nm M6 – M24 26 cm 27 cm 3,15 Kg

SPECIFICATIONS O The machine is equipped with an anti-feedback security system

for a powerful impact in aminimum of space

1 Impact wrench2 Li-ion Batteries1 Ventilated charger

1/2"

2,6 Ah20 V

1220 Nm

1/2" Impact wrench

Reverse buttonon the sides

Powerful andefficient motor

IntegratedLED light

Anti-feedbacksecurity system

CONTENT

O Great Power : 1220 Nm



Power tools - WIRED

Power TOOLSWIREDElectric tool solutions

New Range 2014

MIGHTY SEVEN58


Power tools - WIRED

SPECIFICATIONS

O Excellent weight/power ratio

O Good balance of the machine

thanks to the ergonomic handle

O Manual shaft locking system

Paddiameter

Power Rounds/Minute Cordon Bore Length Heigth Weight

Ø H

AG92103A 230 mm 2100 W 6 000 RPM 4 m 22,23 mm 49 cm 14 cm 6,5 Kg

AG50853A 125 mm 850 W 11 000 RPM 4 m 22,23 mm 28 cm 11 cm 2,25 Kg

AG50853A

Ø 125 mm

AG92103A

Ø 230 mm

850 W

2100 W

Applications : ● Cutting, grinding and deburring works on steel, cast iron, stainless steel, aluminum, etc., ● Clean cuts on blocks, bricks, tiles, sandstones, etc…

Thin casing formore confort

Applications : ● Cutting, grinding, deburring, grinding, rust removal, and polishing works on steel, cast iron, stainless steel, aluminum, etc

GACHETTEON / OFF

BOUTON POUSSOIRON / OFF

- Blocking of the shaft with the button for a fast pad replacement- Automatic stop carbons- Slow start- Right / left reverse system- Ergonomic for a perfect handling

1 Grinder1 Removable handle

CONTENT

Power grinders



Auto Repair Tool


Pneumatic tools

Global expansion

FRANCE IBÉRICA BENELUX DEUTSCHLAND

KING TONY EUROPE3 Rue des imprimeurs ZI République Nord 1 86000 POITIERS - FRANCE

EUROPE

Tél : +33 (0)5 49 30 33 27 Fax : +33 (0)5 49 30 30 91Email: [email protected]

KING TONY BENELUX 16 Boulevard Paepsem 1070 Anderlecht - BELGIQUE

KING TONY FRANCE3 Rue des imprimeurs ZI République Nord 1 86000 POITIERS - FRANCE

KING TONY IBÉRICA Calle de La Alcarria, 7 BAJO 4 28823 COSLADA - SPAIN

KING TONY DEUTSCHLAND GMBH,Robert-Perthel-Strasse 79, 50739 Köln - DEUTSCHLAND

BENELUX

IBÉRICA

FRANCE

DEUTSCHLAND

Tél : +32 2 520 57 37Fax : +32 2 520 26 37Email: [email protected]

Phone : +49 221 - 29889844Fax : +49 221 - 29889845Email: [email protected]

Tél : +33 (0)5 49 30 30 90 Fax : +33 (0)5 49 30 30 91Email: [email protected]

Tel : +34 917 335 090 Fax : +34 913 149 852Email: [email protected]

Your Dealer

KIN

G T

ON

Y Eu

rope

SA

S au

cap

ital d

e 4

500

000

€ - O

ffer v

alid

unt

il th

e 31

/03/

2015

- Ph

oto

non

cont

ract

uelle

s - P

ublic

pric

es in

eur

o ex

cl V

AT

A brand of group

Documents

M7 Catalog