Upload
usman-zouque
View
218
Download
0
Embed Size (px)
Citation preview
7/30/2019 M3Bollard
1/3
Blocking Bollard M30
Design: Blocking bollards in compact design with integrated drive unit andseparate control unit in separate cabinet for indoor installation.
Blocking Element Cylindrical: Diameter: 355 mm, blocking height 1000 mm above ground level
Blocking Element Material: S355 with multi-level zinc based plastic coating.
Operating Time: Raising: approx. 5 seconds - Lowering: approx. 5 seconds
Impact Load: 611 kJ (15.000lbs at a speed of 30 mph)certified according to ASTM F 2656-07 M30
Power: 230 V ; single phase ~ 50Hz
Hydraulic Fluid: Mineral oil HLP 22
Control: control board in separate control box for wall mounting inside abuilding, control voltage 24 V
Emergency Operation: The bollards remain in the raised position in case of power failureand can be lowered manually
Lighting: Bollard top lighting red
Colour: Standard: Blocking element: Dark Grey Metallic RAL 7021Mounting Pit: Galvanised,Top lid of Mounting pit RAL 7021
Optional: RAL colours or DB colour tones
7/30/2019 M3Bollard
2/3
Foundation:
7/30/2019 M3Bollard
3/3