M325C MH M325C LMHEngine Engine Model Cat® 3126B ATAAC diesel engine Net Flywheel Power – M325C LMH 140 kW 188 hp Net Flywheel Power – M325C MH 128 kW 173 hp • Meets EPA Tier

®®

EngineEngine Model Cat® 3126B ATAAC

diesel engineNet Flywheel Power – M325C LMH 140 kW 188 hpNet Flywheel Power – M325C MH 128 kW 173 hp

• Meets EPA Tier 2 and EU Stage II emission requirements.

• Net power advertised is the power available at theflywheel when the engine is equipped with fan,air cleaner, muffler, and alternator.

• No engine derating is required below 3000 m (9,842.5 ft)altitude.

WeightsOperating Weight – M325C LMH 37 000 kg 81,571 lbOperating Weight – M325C MH 30 000 kg 66,138.6 lb

M325C MHM325C LMHWheel MaterialHandler

2

M325C MH/LMH Wheel Material HandlerThe M325C MH/LMH incorporates many innovations for excellent performance and durability.

Complete Customer Service

Your Cat dealer offers a wide rangeof services that will help you operatelonger with lower costs. pg. 11

Maintenance and Reliability

All daily maintenance points are easilyaccessible from ground level and/orwalkways and are easy to service withcentralized locations and compartments.pg. 10

Hydraulic Cab Riser

The M325C MH/LMH is equipped witha Hydraulic Cab Riser for maximumvisibility on all sides of the machinewith additional variable height of2.4 m (7.9 ft). pg. 6

✔

Engine and Hydraulics

The Cat® 3126B ATAAC Diesel Engineand Hydraulic System provide maximumpower and efficiency for excellentperformance in material handlingapplications. pg. 5

Two-Piece MH Front Linkage

The two-piece material handling frontsare purpose-designed and built withexcellent reach and durability forsuperior performance in materialhandling applications. pg. 4

✔ New Feature

3

Work Tools – Attachments

A multitude of grapples and magnetsare available to provide a total machine-tool system that delivers excellentproductivity through performanceand durability. pg. 9

Caterpillar® Wheel Material HandlerUpper Frame and Undercarriage

The M325C MH/LMH have purpose-designed upper frames and undercarriagesfor excellent durability in materialhandling applications and are easilymaneuverable around the job site. pg. 8

✔

Operator Comfort

The new operator station designprovides excellent operator comfortand visibility. pg. 7

✔

Cat Two-Piece Front Linkage.Two different front linkage configurations,14.3 m (47 ft) and 15.65 m (51 ft 4 in),are available to provide the correctmatch between reach and lift capacityfor all material handling applications.

Material Handling Front Components.Material Handling booms and sticksare built for excellent performanceand durability.

Finite element analysis is used in thedetermination of structural stresses andenables optimization of durability andperformance.

Castings and forgings are used at highstress areas such as the boom nose,boom foot, boom cylinder and stick foot.

Internal baffle plates provide for addedstrength and durability throughout thestructure to withstand torsional loads.

Welded Box-Section Structures.The boom and stick are designedand built for maximum durabilityand performance. Efficient designof welded box-section structures withthick, multi-plate fabrications in highstress areas increases durability inabove ground loading.

Side Plates. Extended side plates on thestick provide excellent protection forthe hydraulic lines. The lines are routedalong the top of the stick between theextended side plates, providing protectionfrom damage.

4

Two-Piece MH Front LinkageThe two-piece material handling fronts are purpose-designed and built with excellent reachand durability for superior performance in material handling applications.

3126B ATAAC Engine. The six-cylinder,turbocharged engine is EPA Tier 2 andEU Stage II compliant. It delivers, at therated speed of 1800 rpm, a net power of140 kW (188 hp) for the M325C LMHor 128 kW (173 hp) for the M325C MH.It is built for power, reliability, andfuel economy.

Automatic Engine Control. AutomaticEngine Control reduces engine RPMswhile the machine is not operating tomaximize fuel efficiency.

Caterpillar Hydraulic Generator.An optional 20 kW hydraulically drivengenerator can power magnets of 1.22 m(48 in), 1.45 m (57 in), or 1.68 m (66 in)in diameter. A Baldor generator andelectronic magnet controller manufacturedby Cat are linked to provide troublefree service and virtually eliminatetraditional maintenance.

Hydraulic Cylinder Snubbers.The hydraulic cylinder snubbers atthe rod end of boom cylinders and bothends of stick cylinders reduce soundand increase cylinder life to keep themachine working longer.

5

Engine and HydraulicsThe Cat 3126B ATAAC Diesel Engine and Hydraulic System provide maximum power andefficiency for excellent performance in material handling applications.

Lift Arms. The lift arms on the hydrauliccab riser are box-section designed forgood cab stability. The linkage is aparallelogram design, which keepsthe cab level in all positions.

Hydraulic Cylinders. Two heavy-dutyhydraulic cylinders provide quick andcontrolled up and down movement.At the topmost position, the cylindersare retracted to ensure excellent stability.In event of hydraulic malfunction, thecab can be lowered using either a leverinside the cab or one on the frame atground level.

Bottom Position. This position is usedto allow for easy shipping and greaterstability during travel.

6

Hydraulic Cab RiserThe M325C MH/LMH is equipped with a Hydraulic Cab Riser for maximum visibilityon all sides of the machine with additional variable height of 2.4 m (7.9 ft).

Interior Operator Station. The operatorwork station has low sound levels, andthe controls have been convenientlyplaced for ergonomics, easy adjustmentand ease of operation. Fully automaticclimate control adjusts temperature andair flow.

Cab Mounts. The cab is attached to theframe with resilient mounts to reducesound and vibration.

Viewing Area. Wide windows allowfor excellent viewing in all directions.A large polycarbonate skylight providesexcellent visibility upwards. The two-piece window can be opened separatelyfor better ventilation or the lower portioncan slide into the upper window tocompletely open the front bay.

Seat. The new seat for wheel materialhandlers offers adjustable back rest,lumbar support, cushion length andcushion angle. Independently adjustablearmrests and pilot controls allowtailored ergonomics to suit operatorpreference. The seat provides airsuspension, seat heating, horizontalsuspension and automatic adjustment.

Automatic Climate Control.Fully automatic climate controladjusts temperature and air flow.

7

Operator ComfortThe new operator station design provides excellent operator comfort and visibility.

Purpose-Designed Upper Frame andCounterweight. The purpose-designedand built upper frame is reinforcedwith additional plates of high strengthmaterial to handle greater loadingassociated with material handlingfor excellent durability.

Strong Stable Undercarriage.The M325C MH/LMH wheelundercarriages provide maximumrigidity and long service life. This 4 dual/single wheel undercarriage provides thestability needed for Material Handlingapplications, and is well suited for usewith a hydraulic cab riser. The hydrauliclines are routed through the frame, andthe cylinders have heavy-duty guardsto provide protection from damage.

M325C MH Tires. The smaller machineincludes 4 dual 12.00-20 solidrubber tires.

M325C LMH Tires. The larger machineis equipped with 4 solid rubber tires(16.00-25). Optional pneumatic tiresare also available.

Heavy Duty Axles. The front axles onthe M325C MH and the rear axles onthe M325C LMH offer great oscillatingand steering angles. The transmissionis mounted directly on the rear axle forprotection and optimum ground clearance.

8

Caterpillar Wheel Material Handler Upper Frame and UndercarriageThe M325C MH/LMH have purpose-designed upper frames and undercarriages forexcellent durability in material handling applications and are easily maneuverablearound the job site.

Orange Peel Grapples. The Caterpillarorange peel grapples are constructedwith four wear-resistant steel tinesand fully replaceable tips for excellentservice life.

Hydraulic cylinders are enclosed withineach tine for maximum protection.

Mechanical stops prevent the cylindersfrom bottoming-out and hydrauliccushioning provides additional protection.

Walker Magnets. The Walker 1.22 m(48 in), 1.45 m (57 in), or 1.68 m (66 in)Lift Master magnets can be used withthe M325C MH/LMH. These magnetshave been designed and engineered forscrap processing applications. Ask yourdealer salesperson for information onthe Walker Magnet.

Work Tool Sizing. Grapples and worktools must be matched to the machinesize, linkage configuration, andapplication with respect to materialdensities. For material densities in the2000 lb. per yd3, the following sizesshould be used:

The M325C MH should use the0.57 m3 (0.75 yd3) grapple with the7420 mm (24 ft 4 in) stick and the0.76 m3 (1.0 yd3) grapple with the6000 mm (19 ft 8 in) stick.

The M325C LMH should use the0.76 m3 (1.0 yd3) grapple with the7420 mm (24 ft 4 in) stick and the0.96 m3 (1.25 yd3) grapple can be usedwith the 6000 mm (19 ft 8 in) stick.

9

Work Tools – AttachmentsA multitude of grapples and magnets are available to provide a total machine-tool systemthat delivers excellent productivity through performance and durability.

Extended Service Intervals.M325C MH/LMH service andmaintenance intervals have been extendedto reduce machine service time, increasemachine availability, and reduce operatingcosts. Using S•O•SSM analysis, hydraulicoil change intervals can be extended from2000 hours to 4000 hours. Engine coolantchange intervals are up to 6000 hourswhen Cat Extended Life Coolant/Antifreeze is used.

Easy to Clean Coolers. Flat fins on allcoolers reduce plugging and make iteasier to remove debris.

Engine Inspection. The engine can beaccessed from both walkways and fromthe upper structure.

Air Filter. Caterpillar Radial Seal airfilters do not require tools to servicethem, thus reducing maintenance time.The air filter features a double-elementconstruction and built-in precleaner forsuperior cleaning efficiency. When theair cleaner plugs, a warning is displayedon the monitor screen in the cab.

Diagnostics and Monitoring.The M325C MH/LMH is equipped withS•O•S sampling ports for the hydraulicsystem and engine oil. A connectionfor the Electronic Technician (ET)is conveniently located in the cab.

10

Maintenance and ReliabilityAll daily maintenance points are easily accessible from ground level and/or walkwaysand are easy to service with centralized locations and compartments.

Cat Dealers. Your Cat Dealer offers awide range of services that can be setup under a customer support agreementwhen you purchase your equipment.To help you get the best return on yourinvestment, the dealer will help youchoose a plan that can cover everythingfrom machine and attachment selectionto replacement.

Selection. Make detailed comparisonsof the machines your are consideringbefore you purchase. What are thejob requirements? What productionis needed? What is the cost of lostproduction? Your Cat Dealer canhelp you find precise answers tothese questions.

Purchase. Look past the initial purchaseprice of the machine. Consider thefinancing options available as well asday-to-day operating costs. This is alsothe time to look at dealer services thatcan be included in the cost of the machineto yield lower equipment owning andoperating costs over the long run.

Maintenance. What is the cost ofpreventative maintenance? More andmore equipment buyers are planningfor effective maintenance before buyingequipment. Choose from your dealer’swide range of maintenance services atthe time you purchase your machine.Repair option programs guarantee thecost of repairs up front. Diagnosticprograms such as Scheduled Oil Samplingand Technical Analysis help you toavoid unscheduled repairs.

Replacement. Repair, rebuild, or replace?Your Cat Dealer can help you evaluatethe costs involved so you can make theright choice.

Product Support. You will find nearlyall parts at our dealer parts counter.Cat Dealers utilize a worldwide computernetwork to find in-stock parts to minimizemachine downtime. You can also savemoney with remanufacturedcomponents.

11

Complete Customer ServiceYour Cat dealer offers a wide range of services that will help you operate longerwith lower costs.

12 M325C MH/LMH Wheel Material Handler specifications

Weights

Operating Weight – M325C LMH 37 000 kg 81,571 lbOperating Weight – M325C MH 30 000 kg 66,138.6 lbUpper – M325C LMH 8250 kg 18,188.1 lbUpper – M325C MH 8250 kg 18,188.1 lbCounterweight – M325C LMH 7700 kg 16,975.6 lbCounterweight – M325C MH 5600 kg 12,345.9 lbUndercarriage – M325C LMH 13 240 kg 29,189.2 lbUndercarriage – M325C MH 11 080 kg 24,427.2 lbTwo-Piece Front (with 5575 kg 12,290.8 lbcylinders) – M325C LMHTwo-Piece Front (with 5120 kg 11,287.7 lbcylinders) – M325C MH

• The M325C LMH 47' front linkage weighs 5315 kg (11,717.56 lb)

• The M325C MH 47' front linkage weighs 4900 kg (10,802 lb)

Performance

Max. Drawbar Pull 158.7 kN 35,677.2 lb

Swing Mechanism

Swing Torque 82.2 kN·m 60,627.6 lb ftSwing Speed 10.2 RPM

Service Refill Capacities

Fuel Tank 500 L 132 galCooling System 30 L 7.9 galEngine Oil 34 L 9 galFinal Drive (each) 2.5 L 0.66 galHydraulic System 350 L 92.5 gal(including tank)

Engine

Engine Model Cat® 3126B ATAAC diesel engine

Net Flywheel Power – M325C LMH 140 kW 188 hpNet Flywheel Power – M325C MH 128 kW 173 hpGross Power – M325C LMH 151 kW 202 hpGross Power – M325C MH 140 kW 189 hpNet Power – ISO 9249 – 140 kW 187 hpM325C LMHNet Power – ISO 9249 – 128 kW 173 hpM325C MHNet Power – EEC 80/1269 – 140 kW 187 hpM325C LMHNet Power – EEC 80/1269 – 128 kW 173 hpM325C MHBore 110 mm 4.3 inStroke 127 mm 5 inDisplacement 7.2 L 439.4 in3

• Meets EPA Tier 2 and EU Stage II emission requirements.

• Net power advertised is the power available at the flywheelwhen the engine is equipped with fan, air cleaner, muffler,and alternator.

• No engine derating is required below 3000 m (9,842.5 ft)altitude.

Operating Specifications

Max. Reach 15.65 m 51.3 ftHyd. Cab Riser Height 2.4 m 7.87 ftGenerator Set 20 kW 26.82 hpMax. Pin Height – M325C LMH 17.8 m 58.4 ftMax. Pin Height – M325C MH 17.14 m 56.23 ftMax. Travel Speed – M325C LMH 18 kph 11.2 mphMax. Travel Speed – M325C MH 20 kph 12.43 mph

• Maximum reach for the shorter front is 14.33 m (47 ft)

Hydraulic System

Maximum Flow 235 L/min 62 gal/min(each of two pumps)Max. Pressure Implements 35 000 kPa 5,076 psiMax. Pressure Travel 35 000 kPa 5,076 psiMax. Pressure Swing 25 000 kPa 3,625 psiPilot System Max. Pressure 4100 kPa 595 psi

13M325C MH/LMH Wheel Material Handler specifications

117

6

5

4

12

89

3

4

1 6

2

M325C MH M325C LMH1 Shipping height

without stick (at Hydraulic Cab Riser) 3550 mm (11.6') 3785 mm (12.4')

with boom and 6000 mm stick 3550 mm (11.6') 3785 mm (12.4')

with boom and 7420 mm stick 5096 mm (16.7') 4575 mm (15.0')

2 Shipping length

with boom, without stick 12 160 mm (39.9') 12 160 mm (39.9')

with boom and 6000 mm stick 12 126 mm (39.8') 12 155 mm (39.9')

with boom and 7420 mm stick 11 780 mm (38.6') 11 970 mm (39.3')

3 Machine length 5910 mm (19.4') 6230 mm (20.4')

4 Tail swing radius 3055 mm (10.0') 3055 mm (10.0')

5 Counterweight ground clearance 1470 mm (4.8') 1710 mm (5.6')

6 Cab height 3400 mm (11.2') 3635 mm (11.9')

with FOG 3530 mm (11.6') 3765 mm (12.4')

with Hydraulic Cab Riser 5805 mm (19.0') 6045 mm (19.8')without FOG

with Hydraulic Cab Riser and FOG 5935 mm (19.5') 6175 mm (20.3')

7 Wheel base 3000 mm (9.8') 3200 mm (10.5')

8 Shipping width 2990 mm (9.8') 2990 mm (9.8')

outside tires 2950 mm (9.7') 3020 mm (9.9')

outside stabs 3275 mm (10.7') 3235 mm (10.6')

9 Ground clearance 250 mm (0.8') 270 mm (0.9')

10 Width with stabilizers on ground 4865 mm (16.0') 5240 mm (17.2')

11 Undercarriage length 5805 mm (19.0') 6230 mm (20.7')

12 Body width

including steps 3700 mm (12.1') 3700 mm (12.1')

without steps 2950 mm (9.7') 2950 mm (9.7')

DimensionsAll dimensions are approximate — measured in mm.

10


M325C LMHBoom length 8850 mm (29.0')

Stick length 6000 mm (19.7')1 Maximum reach 14 330 mm (47.0')

2 Maximum height 16 600 mm (54.9')

3 Maximum depth 4100 mm (13.4')




M325C MHBoom length 8850 mm (29.0')







Working Ranges

10 9 8 7 6 5 4 3 2 1 0 1 Meters

Feet35 3040

1112

25

16 15 14 13

55 50 45 20 15 10 5 50

1

2

0

1

4

3

2

3

4

5

6

8

9

777

10

11

12

13

MetersFeet

0

5

5

10

15

20 6

5

10

15

20

25

30

35

40

45

50

55

14

15

16

17

6000 mm (19.7')7420 mm (24.3')

10 9 8 7 6 5 4 3 2 1 0 1 Meters

Feet35 3040

1112

25

16 15 14 13

55 50 45 20 15 10 5 50

1

2

0

1

4

3

2

3

4

5

7

8

9

666

10

11

12

13

MetersFeet

0

5

5

10

15

20 6

5

10

15

20

25

30

35

40

45

50

55

14

15

16

17

6000 mm(19.7')7420 mm(24.3')


M325C MH – Lift Capacities – 6000 mm/19'8"With 6000 mm and 7420 mm sticks.

15.0 m Stabilizers up *5710 *5710 *5240 *5240 6.38Stabilizers down *5900 *5900 *5130 *5130 6.64

13.5 m Stabilizers up *7060 *7060 *5980 5400 *4430 4050 8.80Stabilizers down *7130 *7130 *6100 *6100 *4330 *4330 *4380 *4380 8.97

12.0 m Stabilizers up *7040 5530 5210 4040 3950 3020 10.46Stabilizers down *7110 *7110 *6060 *6060 *4180 *4180 *4020 *4020 10.59

10.5 m Stabilizers up 7080 5540 5240 4070 4000 3060 3250 2450 11.70Stabilizers down *7430 *7430 *6640 *6640 *5790 *5790 *3820 *3820 11.79

9.0 m Stabilizers up *8700 7770 6970 5430 5180 4010 3980 3050 3120 2340 2820 2090 12.63Stabilizers down *8730 *8730 *7570 *7570 *6710 *6710 *6030 *6030 *5080 4970 *3720 *3720 12.70

7.5 m Stabilizers up *9190 7460 6760 5230 5040 3880 3900 2970 3090 2310 2520 1850 13.33Stabilizers down *9240 *9240 *7870 *7870 *6880 *6880 *6110 *6110 *5470 4930 *3690 *3690 13.38

6.0 m Stabilizers up *12 290 10 900 9150 6970 6450 4940 4840 3690 3780 2850 3020 2240 2440 1770 2330 1680 13.83Stabilizers down *12 710 *12 710 *9990 *9990 *8290 *8290 *7100 *7100 *6220 6010 *5500 4860 *4650 4000 *3710 *3710 13.87

4.5 m Stabilizers up 13 190 9620 8460 6340 6060 4570 4610 3460 3630 2710 2930 2150 2390 1730 2190 1570 14.16Stabilizers down *14 430 *14 430 *10 820 *10 820 *8720 *8720 *7330 *7330 *6320 5840 *5510 4760 *4790 3950 *3780 3650 14.18

3.0 m Stabilizers up *8900 8220 7730 5660 5650 4180 4350 3220 3470 2550 2820 2050 2330 1670 2110 1500 14.32Stabilizers down *7810 *7810 *11 450 *11 450 *9050 *9050 *7490 7130 *6360 5670 *5480 4650 *4690 3890 *3900 3550 14.32

1.5 m Stabilizers up *4010 *4010 7130 5100 5290 3840 4120 3000 3320 2410 2730 1960 2280 1620 2080 1470 14.32Stabilizers down *3920 *3920 *11 560 *11 560 *9120 8970 *7490 6880 *6300 5510 *5360 4540 *4490 3830 *3950 3520 14.31

0.0 m Stabilizers up *3720 *3720 6740 4740 5020 3580 3940 2830 3190 2290 2650 1880 2240 1580 2090 1470 14.15Stabilizers down *3740 *3740 *8820 *8820 *8840 8670 *7270 6680 *6080 5380 *5100 4460 *4150 3790 *3670 3560 14.13

–1.5 m Stabilizers up *4230 *4230 6550 4560 4850 3430 3820 2710 3110 2210 2600 1830 2220 1560 2150 1510 13.83Stabilizers down *4290 *4290 *7950 *7950 *8180 *8180 *6780 6550 *5640 5290 *4650 4410 *3590 *3590 *3330 *3330 13.79

–3.0 m Stabilizers up *4970 *4970 6510 4520 4790 3360 3760 2650 3070 2170 2580 1820 2270 1600 13.32Stabilizers down *8120 *8120 *7130 *7130 *5970 *5970 *4940 *4940 *3930 *3930 *2890 *2890 13.27

–4.5 m Stabilizers up 4800 3380 3760 2660 3080 2180Stabilizers down *5690 *5690 *4820 *4820 *3900 *3900

Undercarriage configuration

4.5 m 6.0 m 7.5 m 9.0 m 10.5 m 12.0 m 13.5 m

BOOM – 8850 mm STICK – 6000 mm MAXIMUM REACH/HEIGHT/DEPTH – 14 330 / 15 980 / 5000 mm

Metric Units/all weights are in kg

m

50.0 ft Stabilizers up *15,040 *15,040 *12,050 *12,050 19.23Stabilizers down *11,930 *11,930 *11,760 *11,760 20.18

45.0 ft Stabilizers up *15,150 *15,150 *12,440 11,510 *9930 9430 27.92Stabilizers down *15,320 *15,320 *12,760 *12,760 *9820 *9820 28.51

40.0 ft Stabilizers up *16,740 *16,740 *15,110 11,860 11,140 8630 8980 6860 33.73Stabilizers down *16,850 *16,850 *15,290 *15,290 *12,700 *12,700 *8940 *8940 34.15

35.0 ft Stabilizers up 15,220 11,900 11,240 8720 8560 6540 7310 5510 37.96Stabilizers down *16,200 *16,200 *14,500 *14,500 *12,010 *12,010 *8470 *8470 38.29

30.0 ft Stabilizers up *18,910 16,750 15,020 11,700 11,130 8620 8550 6530 6670 4990 6280 4670 41.17Stabilizers down *18,980 *18,980 *16,480 *16,480 *14,620 *14,620 *13,140 *13,140 *10,180 *10,180 *8220 *8220 41.44

25.0 ft Stabilizers up *19,920 16,110 14,580 11,290 10,860 8350 8390 6380 6620 4940 5610 4110 43.57Stabilizers down *20,040 *20,040 *17,100 *17,100 *14,950 *14,950 *13,280 13,220 *11,870 10,600 *8140 *8140 43.77

20.0 ft Stabilizers up *26,480 23,580 19,750 15,080 13,920 10,660 10,440 7960 8140 6130 6480 4810 5220 3780 5150 3730 45.31Stabilizers down *27,420 *27,420 *21,610 *21,610 *17,960 *17,960 *15,420 *15,420 *13,500 12,940 *11,920 10,450 *8930 8590 *8170 *8170 45.41

15.0 ft Stabilizers up 28,500 20,870 18,290 13,720 13,090 9880 9940 7480 7820 5830 6290 4620 5130 3700 4850 3470 46.42Stabilizers down *31,130 *31,130 *23,400 *23,400 *18,900 *18,900 *15,900 *15,900 *13,700 12,590 *11,950 10,240 *10,320 8500 *8320 8050 46.49

10.0 ft Stabilizers up *22,670 17,850 16,720 12,260 12,210 9050 9400 6960 7480 5500 6080 4420 5020 3590 4670 3310 46.95Stabilizers down *19,670 *19,670 *24,780 *24,780 *19,600 *19,600 *16,230 15,370 *13,790 12,220 *11,860 10,010 *10,080 8370 *8590 7830 46.98

5.0 ft Stabilizers up *9470 *9470 15,400 11,030 11,420 8300 8900 6480 7150 5190 5880 4220 4900 3470 4590 3230 46.98Stabilizers down *9210 *9210 *25,060 *25,060 *19,770 19,330 *16,230 14,830 *13,640 11,880 *11,570 9800 *9620 8250 *8720 7760 46.95

0.0 ft Stabilizers up *8550 *8550 14,540 10,240 10,830 7740 8500 6100 6890 4930 5710 4060 4820 3390 4610 3240 46.42Stabilizers down *8590 *8590 *20,670 *20,670 *19,170 18,680 *15,740 14,400 *13,140 11,600 *10,980 9620 *8820 8160 *8100 7840 46.36

–5.0 ft Stabilizers up *9620 *9620 14,130 9860 10,470 7400 8230 5840 6710 4760 5600 3950 4790 3360 4740 3330 45.34Stabilizers down *9750 *9750 *18,320 *18,320 *17,730 *17,730 *14,660 14,120 *12,160 11,410 *9950 9510 *7470 *7470 *7330 *7330 45.21

–10.0 ft Stabilizers up *11,230 *11,230 14,020 9760 10,330 7260 8110 5730 6620 4680 5570 3920 5010 3530 43.64Stabilizers down *18,210 *18,210 *15,420 *15,420 *12,870 *12,870 *10,580 *10,580 *8310 *8310 *6340 *6340 43.47

–15.0 ft Stabilizers up 10,360 7300 8120 5740 6650 4710Stabilizers down *12,230 *12,230 *10,290 *10,290 *8220 *8220


15.0 ft 20.0 ft 25.0 ft 30.0 ft 35.0 ft 40.0 ft 45.0 ft

BOOM – 29'0" STICK – 19'8" MAXIMUM REACH/HEIGHT/DEPTH – 47'0" / 52'5" / 16'5"

English Units/all weights are in lbs

ft

* Rated by hydraulic capacity rather than stability capacity. Rated loads do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity.


M325C MH – Lift Capacities – 7420 mm/24'4"With 6000 mm and 7420 mm sticks.


15.0 m Stabilizers up *6030 *6030 *4660 *4660 *4200 *4200 9.36Stabilizers down *5050 *5050 *3830 *3830 *3610 *3610 9.19

13.5 m Stabilizers up *6780 *6780 *5940 5750 *4620 4360 *3790 *3790 11.11Stabilizers down *5720 *5720 *4980 *4980 *3820 *3820 *3250 *3250 10.98

12.0 m Stabilizers up *7240 *7240 *6680 5830 5720 4450 *4230 3440 *3560 3190 12.43Stabilizers down *5630 *5630 *4830 *4830 *3490 *3490 *3040 *3040 12.34

10.5 m Stabilizers up *7620 *7620 *6960 5810 5730 4460 4530 3480 *3420 2740 13.46Stabilizers down *6030 *6030 *5520 *5520 *4510 *4510 *2920 *2920 13.38

9.0 m Stabilizers up *7810 7710 *7070 5720 5670 4400 4500 3460 3630 2740 3260 2430 14.25Stabilizers down *6770 *6770 *6120 *6120 *5570 *5570 *5100 *5100 *3850 *3850 *2850 *2850 14.19

7.5 m Stabilizers up *8190 7470 7150 5560 5550 4290 4430 3380 3590 2700 2990 2210 14.85Stabilizers down *7080 *7080 *6310 *6310 *5680 *5680 *5150 5060 *4640 4120 *2820 *2820 14.80

6.0 m Stabilizers up *9950 *9950 *8730 7110 6900 5320 5380 4130 4320 3280 3530 2640 2910 2140 2810 2050 15.28Stabilizers down *8320 8320 *7520 *7520 *6570 *6570 *5830 *5830 *5230 4950 *4700 4060 *3290 *3290 *2840 *2840 15.24

4.5 m Stabilizers up *13 160 *13 160 *11 330 9350 8730 6660 6590 5030 5180 3930 4190 3150 3440 2560 2870 2090 2680 1950 15.55Stabilizers down *10 620 *10 620 *9740 *9740 *8050 *8050 *6870 *6870 *6000 5980 *5300 4830 *4710 3980 *3880 3330 *2880 *2880 15.52

3.0 m Stabilizers up *16 700 12 860 11 440 8480 8200 6160 6260 4710 4960 3720 4040 3010 3350 2470 2810 2040 2610 1880 15.67Stabilizers down *14 310 *14 310 *10 660 *10 660 *8540 *8540 *7150 *7150 *6140 5760 *5350 4690 *4690 3890 4020 3280 *2960 *2960 15.66

1.5 m Stabilizers up *9780 *9780 10 560 7680 7680 5680 5930 4400 4750 3520 3900 2870 3250 2380 2760 1990 2580 1850 15.64Stabilizers down *8570 *8570 *11 250 *11 250 *8870 *8870 *7310 6990 *6200 5550 *5340 4550 *4610 3800 *3890 3230 *3070 3030 15.64

0.0 m Stabilizers up *2580 *2580 *6030 *6030 9900 7070 7270 5290 5660 4140 4560 3340 3770 2750 3170 2300 2710 1940 2590 1850 15.47Stabilizers down *2040 *2040 *4960 *4960 *11 310 *11 310 *8910 8770 *7300 6710 *6130 5370 *5220 4420 *4430 3720 *3630 3190 *3240 3040 15.48

–1.5 m Stabilizers up *3250 *3250 *5640 *5640 9500 6700 6980 5010 5450 3950 4420 3200 3670 2660 3110 2240 2690 1920 2650 1900 15.15Stabilizers down *2570 *2570 *4560 *4560 *9320 *9320 *8600 8460 *7060 6500 *5900 5230 *4960 4330 *4120 3660 *3190 3160 *3060 *3060 15.17

–3.0 m Stabilizers up *5950 *5950 9300 6530 6810 4860 5320 3820 4320 3110 3610 2600 3080 2210 2770 1990 14.66Stabilizers down *3190 *3190 *4790 *4790 *8270 *8270 *7920 *7920 *6540 6370 *5450 5130 *4510 4270 *3620 *3620 *2750 *2750 14.70

–4.5 m Stabilizers up 9260 6490 6750 4800 5260 3770 4290 3080 3600 2580Stabilizers down *5230 *5230 *8230 *8230 *6870 *6870 *5720 *5720 *4730 *4730 *3810 *3810 *2810 *2810

–6.0 m Stabilizers upStabilizers down *5410 *5410 *4540 *4540 *3680 *3680


3.0 m 4.5 m 6.0 m 7.5 m 9.0 m 10.5 m 12.0 m 13.5 m 15.0 m



m

55.0 ft Stabilizers upStabilizers down *10,150 *10,150 19.65

50.0 ft Stabilizers up *10,350 *10,350 *8250 *8250 28.38Stabilizers down 10,580 *10,580 *8140 *8140 29.04

45.0 ft Stabilizers up *12,220 *12,220 *10,340 9010 *7300 6680 34.81Stabilizers down 12,330 *12,330 *10,520 *10,520 *7500 *7500 *7240 *7240 35.30

40.0 ft Stabilizers up *13,250 12,650 11,790 9240 8940 6890 *6780 5250 39.60Stabilizers down 13,330 *13,330 *12,110 *12,110 *10,150 *10,150 *6710 *6710 *6740 *6740 39.96

35.0 ft Stabilizers up *14,050 12,660 11,820 9260 9000 6960 6970 5270 5890 4360 43.27Stabilizers down 14,130 *14,130 *13,160 *13,160 *11,820 *11,820 *9350 *9350 *6450 *6450 43.57

30.0 ft Stabilizers up *14,720 12,460 11,680 9130 8930 6880 6960 5270 5470 4020 5170 3770 46.13Stabilizers down 14,750 *14,750 *13,330 *13,330 *12,150 *12,150 *11,120 11,000 *7670 *7670 *6290 *6290 46.33

25.0 ft Stabilizers up *15,320 12,050 11,380 8840 8730 6690 6850 5150 5440 3990 4670 3340 48.26Stabilizers down

*

*

*

*

*

*15,390 *15,390 *13,720 *13,720 *12,360 *12,360 *11,210 10,860 *9560 8840 *6230 *6230 48.4320.0 ft Stabilizers up *17,890 16,390 14,730 11,410 10,930 8410 8430 6400 6660 4970 5330 3880 4310 3040 49.84

Stabilizers down *18,200 *18,200 *16,330 *16,330 *14,280 *14,280 *12,680 *12,680 *11,360 10,650 *10,190 8720 *6160 *6160 *6250 *6250 49.9315.0 ft Stabilizers up *21,700 *21,700 19,710 15,020 13,840 10,570 10,360 7860 8050 6040 6410 4730 5180 3730 4210 2950 4070 2830 50.82

Stabilizers down *22,870 *22,870 *21,090 *21,090 *17,450 *17,450 *14,920 *14,920 *13,030 12,870 *11,510 10,380 *10,200 8560 *7550 7150 *6340 *6340 50.8910.0 ft Stabilizers up 27,940 20,330 17,940 13,370 12,820 9610 9720 7250 7630 5640 6130 4460 5000 3560 4120 2860 3910 2690 51.35

Stabilizers down *30,920 *30,920 *23,070 *23,070 *18,510 *18,510 *15,490 *15,490 *13,310 12,410 *11,600 10,080 *10,140 8370 *8430 7050 *6520 *6520 51.355.0 ft Stabilizers up *23,080 17,210 16,210 11,770 11,830 8660 9090 6650 7220 5230 5850 4190 4820 3390 4020 2760 3840 2620 51.35

Stabilizers down *20,650 *20,650 *24,380 *24,380 *19,220 *19,220 *15,850 15,060 *13,430 11,960 *11,550 9790 *9940 8180 *8310 6950 *6770 6670 51.310.0 ft Stabilizers up *4550 *4550 *11,690 *11,690 14,870 10,520 10,990 7870 8540 6120 6850 4880 5610 3950 4660 3230 3940 2680 3830 2600 50.85

Stabilizers down *4620 *4620 *11,430 *11,430 *24,520 *24,520 *19,310 18,880 *15,810 14,460 *13,280 11,570 *11,280 9530 *9530 8020 *7670 6870 *7140 6710 50.79–5.0 ft Stabilizers up *5660 *5660 *10,370 *10,370 14,020 9730 10,380 7300 8120 5710 6550 4590 5410 3760 4550 3120 3910 2650 49.87

Stabilizers down *5780 *5780 *10,360 *10,360 *21,610 *21,610 *18,630 18,220 *15,270 14,010 *12,740 11,260 *10,690 9330 *8810 7900 *6740 *6740 49.74–10.0 ft Stabilizers up *7030 *7030 *10,770 *10,770 13,590 9330 10,020 6950 7840 5450 6360 4410 5280 3640 4490 3060 4090 2780 48.33

Stabilizers down *7150 *7150 *10,830 *10,830 *18,990 *18,990 *17,130 *17,130 *14,120 13,720 *11,720 11,060 *9660 9200 *7620 *7620 *6030 *6030 48.16–15.0 ft Stabilizers up *11,710 *11,710 13,480 9220 9880 6820 7720 5340 6270 4330 5250 3600 4510 3090

Stabilizers down *11,800 *11,800 *17,760 *17,760 *14,780 *14,780 *12,280 *12,280 *10,100 *10,100 *8050 *8050–20.0 ft Stabilizers up 9920 6860 7740 5360 6310 4360

Stabilizers down *11,550 *11,550 *9630 *9630


10.0 ft 15.0 ft 20.0 ft 25.0 ft 30.0 ft 35.0 ft 40.0 ft 45.0 ft 50.0 ft



ft



M325C LMH – Lift Capacities – 6000 mm/19'8"With 6000 mm and 7420 mm sticks.

16.5 m Stabilizers up *Stabilizers down *7910 *7910 3.69


13.5 m Stabilizers up *8460 *8460 *7300 *7300 *5330 *5330 *5110 *5110 9.12Stabilizers down *8600 *8600 *7540 *7540 *5790 *5790 *5020 *5020 9.43

12.0 m Stabilizers up *9160 *9160 *8440 7460 7110 5530 *5120 4210 *4700 4060 10.70Stabilizers down *9260 *9260 *8570 *8570 *7470 *7470 *5520 *5520 *4650 *4650 10.92

10.5 m Stabilizers up *9760 *9760 *8570 7440 7120 5550 5520 4260 4430 3380 11.87Stabilizers down *9800 *9800 *8590 *8590 *7690 *7690 *6980 *6980 *4580 *4580 *4460 *4460 12.05

9.0 m Stabilizers up *10 080 *10 080 *8760 7310 7040 5470 5480 4230 4370 3330 3900 2950 12.77Stabilizers down *10 170 *10 170 *8810 *8810 *7810 *7810 *7010 *7010 *6340 *6340 *4360 *4360 12.90

7.5 m Stabilizers up *11 340 *11 340 *10 710 9990 *9130 7070 6880 5310 5390 4140 4320 3290 3550 2660 13.43Stabilizers down *11 720 *11 720 *10 850 *10 850 *9210 *9210 *8030 *8030 *7120 *7120 *6370 *6370 *4420 *4420 *4340 *4340 13.53

6.0 m Stabilizers up *13 110 *13 110 *14 790 14 660 *11 610 9410 8790 6730 6650 5100 5240 4000 4240 3210 3490 2610 3310 2460 13.91Stabilizers down *15 300 *15 300 *15 140 *15 140 *11 780 *11 780 *9720 *9720 *8310 *8310 *7260 *7260 *6410 *6410 *5630 5480 *4370 *4370 13.97

4.5 m Stabilizers up *16 850 13 160 11 640 8690 8350 6310 6380 4840 5070 3840 4140 3110 3430 2550 3160 2330 14.20Stabilizers down *17 170 *17 170 *12 760 *12 760 *10 230 *10 230 *8570 *8570 *7370 *7370 *6420 *6420 *5570 5420 *4470 *4470 14.24

3.0 m Stabilizers up *8750 *8750 10 830 7940 7890 5890 6100 4580 4890 3670 4020 3000 3370 2490 3070 2260 14.33Stabilizers down *7280 *7280 *13 400 *13 400 *10 570 *10 570 *8730 *8730 *7410 *7410 *6370 6360 *5430 5350 *4620 *4620 14.34

1.5 m Stabilizers up *4760 *4760 10 180 7340 7500 5520 5850 4340 4730 3510 3920 2900 3310 2430 3040 2230 14.31Stabilizers down *4630 *4630 *13 370 *13 370 *10 580 *10 580 *8690 *8690 *7310 *7310 *6200 *6200 *5180 *5180 *4550 *4550 14.29

0.0 m Stabilizers up *4670 *4670 9780 6980 7220 5250 5660 4150 4600 3390 3840 2820 3260 2390 3070 2250 14.12Stabilizers down *4760 *4760 *10 380 *10 380 *10 170 *10 170 *8370 *8370 *7000 *7000 *5860 *5860 *4740 *4740 *4220 *4220 14.07

–1.5 m Stabilizers up *5370 *5370 9600 6810 7050 5100 5530 4030 4510 3300 3780 2770 3250 2370 3170 2320 13.76Stabilizers down *5530 *5530 *9760 *9760 *9300 *9300 *7730 *7730 *6430 *6430 *5280 *5280 *4000 *4000 *3800 *3800 13.68

–3.0 m Stabilizers up 9570 6780 6990 5040 5480 3980 4480 3270 3770 2760Stabilizers down *9340 *9340 *7990 *7990 *6710 *6710 *5540 *5540 *4360 *4360


3.0 m 4.5 m 6.0 m 7.5 m 9.0 m 10.5 m 12.0 m 13.5 m



m

55.0 ft Stabilizers upStabilizers down

50.0 ft Stabilizers up *18,280 *18,280 *14,550 *14,550 *13,550 *13,550 21.00Stabilizers down *18,770 *18,770 *15,520 *15,520 *13,030 *13,030 22.67

45.0 ft Stabilizers up *18,210 *18,210 *15,320 *15,320 *11,440 *11,440 29.04Stabilizers down *18,570 *18,570 *15,930 *15,930 *11,340 *11,340 *11,220 *11,220 30.09

40.0 ft Stabilizers up *19,940 *19,940 *18,160 16,020 *15,210 11,850 *10,450 9200 34.51Stabilizers down *20,180 *20,180 *18,540 *18,540 *15,770 *15,770 *10,770 *10,770 *10,340 *10,340 35.30

35.0 ft Stabilizers up *21,300 *21,300 *18,710 16,020 15,310 11,920 11,830 9130 *9920 7590 38.58Stabilizers down *21,360 *21,360 *18,740 *18,740 *16,790 *16,790 *14,990 *14,990 *9860 *9860 39.17

30.0 ft Stabilizers up *21,910 *21,910 *19,070 15,760 15,160 11,770 11,790 9090 9370 7130 8690 6580 41.63Stabilizers down *22,080 *22,080 *19,170 *19,170 *17,000 *17,000 *15,280 *15,280 *12,910 *12,910 *9630 *9630 42.09

25.0 ft Stabilizers up *24,800 *24,800 *23,220 21,570 19,750 15,260 14,820 11,450 11,590 8900 9290 7060 7880 5910 43.93Stabilizers down *25,570 *25,570 *23,510 *23,510 *20,000 *20,000 *17,450 *17,450 *15,480 *15,480 *13,830 *13,830 *9560 *9560 44.26

20.0 ft Stabilizers up *27,950 *27,950 *31,910 31,700 *25,120 20,350 18,970 14,540 14,350 11,000 11,300 8620 9130 6900 7480 5580 7320 5450 45.54Stabilizers down *31,890 *31,890 *32,650 *32,650 *25,490 *25,490 *21,070 *21,070 *18,030 *18,030 *15,750 *15,750 *13,900 *13,900 *11,220 *11,220 *9630 *9630 45.77

15.0 ft Stabilizers up *36,330 28,510 25,140 18,800 18,030 13,650 13,770 10,450 10,940 8270 8910 6690 7380 5480 6970 5150 46.56Stabilizers down *37,040 *37,040 *27,590 *27,590 *22,160 *22,160 *18,590 *18,590 *15,990 *15,990 *13,910 *13,910 *12,000 11,670 *9840 *9840 46.69

10.0 ft Stabilizers up *21,830 *21,830 23,380 17,180 17,050 12,730 13,170 9880 10,560 7910 8670 6460 7250 5350 6770 4980 47.01Stabilizers down *17,890 *17,890 *29,010 *29,010 *22,910 *22,910 *18,920 *18,920 *16,060 *16,060 *13,780 13,710 *11,680 11,530 *10,180 *10,180 47.05

5.0 ft Stabilizers up *11,170 *11,170 21,970 15,880 16,190 11,930 12,630 9370 10,210 7580 8450 6250 7130 5240 6700 4910 46.95Stabilizers down *10,810 *10,810 *29,020 *29,020 *22,940 *22,940 *18,830 *18,830 *15,820 *15,820 *13,380 *13,380 *11,080 *11,080 *10,050 *10,050 46.88

0.0 ft Stabilizers up *10,700 *10,700 21,100 15,080 15,570 11,350 12,210 8970 9930 7300 8270 6080 7040 5150 6770 4950 46.33Stabilizers down *10,880 *10,880 *24,200 *24,200 *22,050 *22,050 *18,140 *18,140 *15,140 *15,140 *12,600 *12,600 *10,040 *10,040 *9300 *9300 46.16

–5.0 ft Stabilizers up *12,190 *12,190 20,690 14,700 15,210 11,010 11,940 8710 9740 7130 8170 5980 7020 5130 6990 5110 45.14Stabilizers down *12,510 *12,510 *22,450 *22,450 *20,160 *20,160 *16,720 *16,720 *13,860 *13,860 *11,280 *11,280 *8360 *8360 44.88

–10.0 ft Stabilizers up 20,610 14,640 15,080 10,880 11,820 8600 9670 7060 8150 5960Stabilizers down *20,250 *20,250 *17,270 *17,270 *14,460 *14,460 *11,850 *11,850 *9170 *9170


10.0 ft 15.0 ft 20.0 ft 25.0 ft 30.0 ft 35.0 ft 40.0 ft 45.0 ft



ft



M325C LMH – Lift Capacities – 7420 mm/24'4"With 6000 mm and 7420 mm sticks.


15.0 m Stabilizers up *4960 *4960 *3660 *3660 *3650 *3650 9.00Stabilizers down *6190 *6190 *4970 *4970 *4110 *4110 9.70

13.5 m Stabilizers up *5670 *5670 *4910 4230 *3690 3130 *3270 2910 10.85Stabilizers down *6870 *6870 *6090 *6090 *4860 *4860 *3740 *3740 11.36

12.0 m Stabilizers up 5500 4320 4180 3230 3220 2430 *3050 2320 12.23Stabilizers down *7310 *7310 *6780 *6780 *5910 *5910 *4470 *4470 *3530 *3530 12.63

10.5 m Stabilizers up 5510 4320 4200 3250 3270 2480 2630 1940 13.30Stabilizers down *7640 *7640 *6970 *6970 *6400 *6400 *5550 *5550 *3610 *3610 *3410 *3410 13.61

9.0 m Stabilizers up *6750 5790 5430 4250 4160 3210 3250 2470 2570 1900 2320 1690 14.13Stabilizers down *7860 *7860 *7110 *7110 *6480 *6480 *5930 *5930 *4790 *4790 *3340 *3340 14.37

7.5 m Stabilizers up *7050 5590 5290 4110 4060 3120 3190 2410 2540 1870 2100 1500 14.76Stabilizers down *8690 *8690 *8270 *8270 *7360 *7360 *6620 *6620 *6000 *6000 *5450 *5450 *3320 *3320 14.94

6.0 m Stabilizers up *8170 7590 6830 5290 5070 3900 3920 2980 3100 2320 2490 1820 2010 1420 1950 1370 15.21Stabilizers down *10 380 *10 380 *8830 *8830 *7690 *7690 *6810 *6810 *6100 *6100 *5470 *5470 *4080 *4080 *3340 *3340 15.33

4.5 m Stabilizers up *10 040 *10 040 9130 6950 6420 4900 4810 3650 3740 2810 2980 2200 2410 1750 1970 1390 1840 1280 15.51Stabilizers down *14 910 *14 910 *11 530 *11 530 *9460 *9460 *8050 *8050 *7010 *7010 *6190 *6190 *5480 5440 *4710 4600 *3400 *3400 15.58

3.0 m Stabilizers up 12 940 9390 8310 6180 5940 4450 4510 3360 3540 2620 2850 2080 2330 1660 1920 1340 1770 1220 15.65Stabilizers down *17 010 *17 010 *12 570 *12 570 *10 030 *10 030 *8360 *8360 *7160 *7160 *6230 *6230 *5450 5340 *4690 4540 *3510 *3510 15.67

1.5 m Stabilizers up *9510 7950 7510 5440 5480 4010 4220 3080 3350 2430 2720 1950 2250 1580 1870 1290 1740 1190 15.65Stabilizers down *8470 *8470 *13 150 *13 150 *10 350 *10 350 *8520 *8520 *7210 *7210 *6200 *6200 *5340 5240 *4490 4480 *3650 *3650 15.62

0.0 m Stabilizers up *2000 *2000 *5070 *5070 6890 4870 5090 3640 3960 2840 3180 2270 2610 1840 2170 1510 1830 1250 1740 1180 15.50Stabilizers down *2680 *2680 *5860 *5860 *13 080 *13 080 *10 320 *10 320 *8460 *8460 *7100 *7100 *6040 *6040 *5110 *5110 *4150 *4150 *3810 *3810 15.43

–1.5 m Stabilizers up *2510 *2510 *4560 *4560 6500 4510 4810 3380 3760 2650 3040 2130 2510 1750 2110 1450 1810 1230 1770 1200 15.20Stabilizers down *3380 *3380 *5660 *5660 *10 950 *10 950 *9880 *9880 *8120 *8120 *6780 *6780 *5700 *5700 *4710 *4710 *3580 *3580 *3510 *3510 15.08

–3.0 m Stabilizers up *3130 *3130 *4760 *4760 6310 4330 4650 3220 3640 2530 2950 2050 2450 1690 2080 1420 1850 1260 14.75Stabilizers down *6040 *6040 *10 090 *10 090 *9000 *9000 *7450 *7450 *6200 *6200 *5120 *5120 *4060 *4060 *3130 *3130 14.56

–4.5 m Stabilizers up *5190 *5190 6250 4270 4580 3160 3580 2470 2910 2010 2430 1670 2090 1430Stabilizers down *9150 *9150 *7680 *7680 *6410 *6410 *5290 *5290 *4220 *4220

–6.0 m Stabilizers up 4600 3180 3580 2480 2920 2020Stabilizers down


3.0 m 4.5 m 6.0 m 7.5 m 9.0 m 10.5 m 12.0 m 13.5 m 15.0 m



m

55.0 ft Stabilizers up *12,100 *12,100 *11,640 *11,640 20.57Stabilizers down *12,880 *12,880 *11,100 *11,100 22.47

50.0 ft Stabilizers up *14,960 *14,960 *12,680 *12,680 *9460 *9460 29.59Stabilizers down 13,120 *13,120 *9950 *9950 *9240 *9240 30.77

45.0 ft Stabilizers up *14,630 *14,630 *12,570 12,290 *9170 *9170 *8460 *8460 35.73Stabilizers down 14,860 *14,860 *12,940 *12,940 *9840 *9840 *8340 *8340 36.58

40.0 ft Stabilizers up *15,770 *15,770 *14,370 12,500 *12,130 9520 *8230 7300 *7900 7190 40.29Stabilizers down 15,930 *15,930 *14,630 *14,630 *12,500 *12,500 *8870 *8870 *7830 *7830 40.94

35.0 ft Stabilizers up *16,660 *16,660 *15,190 12,490 12,300 9560 9690 7430 *7570 6130 43.80Stabilizers down 16,690 *16,690 *15,220 *15,220 *13,990 *13,990 *11,580 *11,580 *7530 *7530 44.32

30.0 ft Stabilizers up *17,020 16,600 *15,420 12,320 12,190 9450 9660 7400 7750 5830 7250 5410 46.52Stabilizers down

*

*

*

*

*17,130 *17,130 *15,480 *15,480 *14,110 *14,110 *12,920 *12,920 *9660 *9660 *7370 *7370 46.9225.0 ft Stabilizers up *17,810 16,100 15,390 11,970 11,940 9220 9520 7260 7700 5780 6640 4900 48.59

Stabilizers down *19,080 *19,080 *17,980 *17,980 *16,010 *16,010 *14,410 *14,410 *13,050 *13,050 *11,750 *11,750 *7320 *7320 48.8820.0 ft Stabilizers up *21,760 *21,760 *18,940 15,350 14,860 11,470 11,590 8890 9290 7040 7570 5660 6230 4560 6220 4550 50.03

Stabilizers down *22,510 *22,510 *19,170 *19,170 *16,710 *16,710 *14,800 *14,800 *13,240 *13,240 *11,870 *11,870 *7750 *7750 *7370 *7370 50.2315.0 ft Stabilizers up *21,680 *21,680 *28,230 *28,230 *24,520 20,210 18,840 14,380 14,210 10,850 11,160 8470 9010 6770 7400 5490 6140 4480 5930 4300 50.98

Stabilizers down *32,160 *32,160 *24,950 *24,950 *20,510 *20,510 *17,470 *17,470 *15,220 *15,220 *13,420 *13,420 *11,870 11,700 *9220 *9220 *7500 *7500 51.0810.0 ft Stabilizers up *36,080 27,820 24,690 18,350 17,690 13,300 13,490 10,160 10,700 8030 8700 6470 7200 5290 6030 4370 5750 4150 51.41

Stabilizers down *36,750 *36,750 *27,200 *27,200 *21,720 *21,720 *18,120 *18,120 *15,530 *15,530 *13,510 *13,510 *11,780 11,490 *10,050 9760 *7720 *7720 51.415.0 ft Stabilizers up *23,420 *23,420 22,780 16,590 16,580 12,260 12,800 9500 10,240 7590 8390 6180 7000 5100 5930 4260 5680 4080 51.31

Stabilizers down *20,070 *20,070 *28,500 *28,500 *22,430 *22,430 *18,470 *18,470 *15,630 *15,630 *13,420 *13,420 *11,520 11,290 *9570 *9570 *8050 *8050 51.250.0 ft Stabilizers up *5850 *5850 *13,870 *13,870 21,350 15,280 15,680 11,420 12,200 8940 9840 7200 8120 5920 6830 4940 5840 4180 5710 4090 50.75

Stabilizers down *6050 *6050 *13,440 *13,450 *28,360 *28,360 *22,370 *22,370 *18,330 *18,330 *15,380 *15,380 *13,040 *13,040 *10,980 *10,980 *8750 *8750 *8410 *8410 50.62–5.0 ft Stabilizers up *7300 *7310 *12,800 *12,800 20,470 14,470 15,040 10,820 11,750 8510 9530 6910 7920 5720 6710 4820 5860 4180 49.67

Stabilizers down *7590 *7590 *12,840 *12,840 *25,320 *25,320 *21,390 *21,390 *17,560 *17,560 *14,650 *14,650 *12,260 *12,260 *10,040 *10,040 *7730 *7730 49.44–10.0 ft Stabilizers up *13,450 *13,450 20,040 14,080 14,680 10,480 11,470 8250 9330 6720 7790 5600 6660 4770 6130 4390 48.06

Stabilizers down *13,630 *13,630 *23,140 *23,140 *19,450 *19,450 *16,070 *16,070 *13,330 *13,330 *10,940 *10,940 *8520 *8520–15.0 ft Stabilizers up 19,960 14,000 14,550 10,360 11,360 8140 9250 6650 7770 5580

Stabilizers down *19,730 *19,730 *16,520 *16,520 *13,740 *13,740 *11,280 *11,280 *8890 *8890–20.0 ft Stabilizers up

Stabilizers down


10.0 ft 15.0 ft 20.0 ft 25.0 ft 30.0 ft 35.0 ft 40.0 ft 45.0 ft 50.0 ft



ft



Standard EquipmentStandard equipment may vary. Consult your Caterpillar dealer for details.

Operator StationAdjustable Pilot Operated Joystick ControlsAir Conditioner w/Automatic Climate ControlAshtray with LighterBeverage HolderCoat HookFloor Mat, WashableParallel Windshield Wiper, Including WasherInterior LightingLiterature CompartmentOpenable, Two-Piece Front WindshieldParking BrakeRadioPolycarbonate Skylight, Non-openingStorage Compartment with CoverSun Shield for Front Windshield and SkylightPositive Filtered Ventilation w/Variable Speed BlowerPre-start Monitoring SystemAir Suspension Seat with Seat Heating and Adjustable

and Tiltable Arm RestsOther Standard Equipment

2.4 m (7.9 ft) Hydraulically Adjustable Cab RiserAutomatic Swing BrakeDoor Locks, Caps Lock, and Cat One Key SecurityFine Swing ControlHeavy Duty Upper Frame with Bottom GuardsMaterial Handling CounterweightMirrors, Frame and CabTravel AlarmMedium Pressure ControlCrosshead for Mounting Magnet or Cat Grapple

(at the end of the stick)Falling Objects GuardStarting Aid, Cold WeatherPower Supply, 12V-7ALowering Control Devices for Boom and Stick

EngineCat 3126B ATAAC Diesel Engine24-volt Electric Starting w/Air Intake HeaterFull Hydraulic SteeringHigh Ambient CoolingMufflerSide-by-Side Radiator/Oil CoolerFuel/Water Separator

UndercarriageExclusive 3 Position Transmission Braking ControlSolid Tires

M325C MH – 12.00-20 (dual)M325C LMH – 16.00-25 (single)

Four Wheel Hydrostatic Drive w/on-the-go ShiftingFour Independent or Simultaneously Controlled Hydraulic

Stabilizers w/Single Axis Float PadFully Hydraulic Braking SystemInternal Oil Disk BrakesLockable, Oscillating AxleToolbox, Left HandTwo Wheel SteerTwo Speed Hydrostatic Transmission

ElectricalAlternator, 65ABase Machine Light, FrameCat Electronic Machine ControllerHornLights, Cab MountedBatteries

Optional EquipmentOptional equipment may vary. Consult your Caterpillar dealer for details.

Work ToolsGrapple, Caterpillar 0.57 m3 (0.75 yd3) Orange PeelGrapple, Caterpillar 0.76 m3 (1.0 yd3) Orange PeelGrapple, Caterpillar 0.96 m3 (1.25 yd3) Orange PeelMagnet, Walker 1.22 m (48 in) Lift MasterMagnet, Walker 1.45 m (57 in) Lift MasterMagnet, Walker 1.68 m (66 in) Lift Master

Material Handler SticksStick, 6.0 m (19.7 ft)Stick, 7.4 m (24.3 ft)

Tires, M325C LMH Optional PneumaticMichelin 23.5-R25

Generator, 20 kW Solid State

R

For more complete information on Cat products, dealer services, and industry solutions, visit us on the web at www.CAT.com

© 2004 CaterpillarPrinted in U.S.A.

Materials and specifications are subject to change without notice.Featured machines in photos may include additional equipment.

See your Caterpillar dealer for available options.AEHQ5587 (4-04)

M325C MH/LMH Wheel Material Handler

Documents

M325C MH M325C LMHEngine Engine Model Cat® 3126B ATAAC diesel engine Net Flywheel Power – M325C LMH 140 kW 188 hp Net Flywheel Power – M325C MH 128 kW 173 hp • Meets EPA Tier