Upload
hugo-luis-escalante
View
93
Download
0
Tags:
Embed Size (px)
DESCRIPTION
1. Overview_2. Unpacking and Installation3. User Operation Technical Training Course
Citation preview
Relations of a model name and series model name
Relation of representative model name and an object model name are used in this training material as follows. (Except when In case of object model name is limited to use.)
Model name A related model name
B/W copier
500 bizhub 500/420
7145bizhub 7145/Di451
Di470(Except Japan)
7235 bizhub 7235/7228/7222/7322
3510 bizhub 3510(f)/3010, Di3510(f)/Di3010
750 bizhub 750/600
350 bizhub 350/250/200
Color copier
C450 bizhub C450/C351
C352 bizhub C352/C300
C250 bizhub C250
Module 1 : Outline
Explanation of forwarding direction of paper
Width and Length When size of original and paper are expressed “Y” dimension ==> Width “X” dimension ==> Length Paper forwarding direction (Lengthwise and Crosswise)
If the Width(Y) of the paper is shorter than the Length(X) ==>Lengthwise
If the Width(Y) of the paper is longer than the Length(X) ==>Crosswise
Lengthwise
Crosswise
Description for Lengthwise and Crosswise Lengthwise ==>Mark "S" (Short edge feeding) is added to the paper size. Crosswise ==>Only paper size indication.(no additional symbol.)
Note: In case of paper size only for Lengthwise forwarding (no crosswise forwarding), mark "S" is not added even if it is Lengthwise forwarding. (Ex. A3, 11x17 inch. size paper)
Paper size direction Indication of paper size
A4, 8.5x11Crosswise A4, 8.5x11
Lengthwise A4S, 8.5x11S
A3, 11x17 Lengthwise A3, 11x17
Example
Module 1 : Outline
1. Overview
Module 1 : Outline
(1) Product concept -1
1.1 Product Plan (1/5)
Realization of multi access of a Copy / Printer /FAX/ Scan Realization of multi access of a Copy / Printer /FAX/ Scan
functions.functions.
Easy electronic data handling of FAX/ scan dataEasy electronic data handling of FAX/ scan data
The MFP which improves office The MFP which improves office solution proposal more.solution proposal more.
Module 1 : Outline > 1. Overview
Copy / print speed [A4/min ,8.5x11/min]
30 40 50 60
(1) Product concept -2
1.1 Product Plan (2/5)
KONICA MINOLTA lineup (B/W MFP)Successors of 7235, 7145/Di451, Di3510Series Model for General offices (Seg.3-Seg.4)
7255 / Di55107255 / Di5510
bizhub 600bizhub 600
5555
6060
Product positioning 5050 Copy speed ([A4]/minute):
bizhub 500bizhub 500bizhub 420bizhub 4205050
7145/ Di4517145/ Di451
bizhub 350bizhub 3503535
Upgrade
4242
4545
Seg.331-44Seg.331-44
Seg.445-69Seg.445-693535
353572357235
Di3510Di3510
OptionCommonization
Module 1 : Outline > 1. Overview
(2) Aim of Product Commercialization
1.1 Product Plan (3/5)
To launch the product with competition ability against To launch the product with competition ability against competitor Seg3/4 (35-55ppm) range.competitor Seg3/4 (35-55ppm) range.
To make a strong line-up in office range by bizhub 350/250 To make a strong line-up in office range by bizhub 350/250 and bizhub 750/600.and bizhub 750/600.
To launch the unified product (Konica Minolta) to adapt To launch the unified product (Konica Minolta) to adapt unified sales company and dealer.unified sales company and dealer.
To launch the product which is profitable corresponding to To launch the product which is profitable corresponding to B/W MFP demand.B/W MFP demand.
Module 1 : Outline > 1. Overview
(3) Target Market
1.1 Product Plan (4/5)
Other area: Areas other than Japan, North America and Europe
A target market / user
500 420
Market /User
B/W market mainly on segment 4 B/W output office user Use form: B/W copiers / network printer, B/W network scanner , Document management, FAX
A monochromatic market mainly on segment 3 and 4 Same as left Same as left
Same as left
Average monthly
CV/PV
Japan and
other area
North America,
Europe
It extends domestically
Others area
North America,
Europe
500 11,000 17,000 7145 8,000 12,000
420 8,000 12,0007235 7,000 10,000
Target monthly average CV/PV
Module 1 : Outline > 1. Overview
(4) Main Differentiation points from conventional model
1.1 Product Plan (5/5)
500/420 7145/Di451 Di470
Remote copy (a tentative name) Yes No No
Support Super G3 FAX Yes *1) Yes *1) No( No Fax option)
USB 2.0 (For Print) Yes *1) No (USB 1.1) No
Support HDD coding Yes No No
Push scan without HDD YesYes
(There is restriction)
No
Scan to multi serve Yes No No
Enlarged rotation function Yes *2) No No
Data preview indication in BOX Yes No No
PDF/TIFF drag & drop direct print Yes *2) No No
Copiers writing resolution is 1200dpi equivalence Yes No (600 dpi) No (600 dpi)
Fax reading / transmission resolution is 600dpi Yes No (400 dpi) No (400 dpi)
Polymerized toner (Low temperature fixing type) Yes
Yes(Conventional Polymerized
toner)
No(former crush type)
Mail bin Finisher Yes No x
Operation panel angle is variable which can be adjusted by user. Yes No x
*1): Option, *2): Under development
Module 1 : Outline > 1. Overview
(1) System Configuration Block Diagram -1
1.2 System Constitution (1/6)
a.Hardware (standard equipment & options)Blue: OptionBlue: Option
Main body :bizhub 500/ bizhub 420 DF –607 :RADF PC-202 : Paper feed cabinet (Two trays) PC-402 : Paper feed cabinet (One Tray) DK-501 : Desk LU-201 : Large capacity unit RU-502 : Relay unit (for FS-511) FS-511 : Finisher (Floor type): FS-510 : Finisher (Built in type): SD-502 : Saddle stitcher (for FS-510) MT-501 : Mail bin kit (for FS-510) PU-501 : Punch unit (for FS-510) OT-601 : Output tray(Additional bin for FS-510) OT-501 : Output tray JS-502 : Separator
FS-510
SD-502
RU-502
OT-601
PU-501
Workingtable
Main body
DF-607
OT -501
JS-502*1)
*1):Common with 350*2):Common with C450*3):Refer to next page for Compatibility
*1):Common with 350*2):Common with C450*3):Refer to next page for Compatibility
PC-402 *3)
DK-501 *1)
PC-202 *3)
LU-201
FS-511
MT-501
*2)
*1) *1)
*1)
*1) ADU
Module 1 : Outline > 1. Overview
(1) System Configuration Block Diagram -2
1.2 System Constitution (2/6)
Compatibility of PC-202
Module 1 : Outline > 1. Overview
PC-202 500/420 350/C450
Serial number : Up to 21216372
Yes(Note:LU-201 can be not installed.) Yes
Serial number : 21216373 or later(Red round sticker is attached beside the barcode of carton.)
Yes(LU-201 can be installed.)
Yes
PC-402 500/420 350/C450
For 500/420(LU-201 can be
installed.)Yes Yes
For 350/C450 No Yes
Specification
How to identify
Product code / Product number
For 500/420/350/C450
For 350/C450
Metric specification 4061 / 316 4061 / 312
Inch specification 4061 / 313 4061 / 317
Compatibility of PC-402
a.Hardware (standard equipment & options)
PC-402 DK-501PC-202
(1) System Configuration Block Diagram -3
1.2 System Constitution (3/6)
Dehumidification heater 1C
Image controller IC -204
Hard disk HD-505
Key counter
line expansion kit ML-503
FAX kitFK-502
Fax mount kitMK-708
*3)
Main body+DF-607
Stamp unit SP-501
A security kit SC-502
*3)
*2)
*1): Common with C350,3510, *2): Common with C450, *3): Under development
*1)
*1)
FAX kitFK-502
*2)
Module 1 : Outline > 1. Overview
Blue: OptionBlue: Optionb.Electronic parts (standard equipment & options)
(1) System Configuration Block Diagram -4
1.2 System Constitution (4/6)
RS-232C serial port(CS remote care use)
RJ45 Ethernet(for Network connection )
USB Port: USB Type B(for ISW / Print use)
1284 IEEE parallel port(for ISW / Print use)
Module 1 : Outline > 1. Overview
c. Local / network interface
(2) Standard Shipment Style -1
1.2 System Constitution (5/6)
Specification CommonWith 350
Commonwith C450
Automatic document feeder (RADF) DF-607 Standard - -
Automatic duplex unit (ADU) --- Standard - -
Main body NIC & CS remote care --- Standard - -
Total (mechanical) counter --- Standard - -
Dehumidification heater 1C Option Yes -
Paper feed cabinet PC-202 Option Yes Yes
PC-402 Option - -
Desk DK-501 Option Yes Yes
Large capacity unit LU-201 Option - -
Finisher FS-510/FS-511 Option - -
Relay unit (for FS-511) RU-502 Option - -
Saddle stitcher (for FS-510) SD-502 Option Yes -
Mail bin kit (for FS-510) MT-501 Option Yes -
Punch unit (for FS-510) PU-501 Option Yes -
Output tray (for FS-510) OT-601 Option Yes -
Output tray (for main body) OT-501 Option - -
Job Separator JS-502 Option Yes -
Image controller IC-204 Option - -
Hard disk HD-505 Option - -
Fax kit FK-502 Option - Yes
Fax mount kit MK-708 Option - -
Stamp unit SP-501 Option Yes -
Module 1 : Outline > 1. Overview
(2) Standard Shipment Style -2
1.2 System Constitution (6/6)
Punch kit destinations
Japan North America
Europe AP, others
PU-501
(Include Swedish Punch Kit)
Yes Yes Yes
(include Swedish type)
Yes
FS-510
AP: Asia Pacific
AP: Asia Pacific
Japan North America
Europe AP, others
Standard type punch function
Yes Yes Yes Yes
Swedish Punching Kit G Yes
FS-511
Module 1 : Outline > 1. Overview
(1) Main Body Specifications -1
1.3 Main Specifications/Functions (1/7)
a. Basic specifications500 420 7145 7235
Copy speed /minute 50 [A4, 8.5x11] 42 [A4, 8.5x11] 45 35
WUT(Room temperature 20degrees C, Rating voltage)
Japan 30 sec. or less 15 sec. or less30 sec. or less
19 sec. or lessOther 60 sec. or less 30 sec. Or less
FCOT 3.6 sec. 4.0 sec. 3.8 sec. 4.3 sec.
Max. original size A3 or 11x17 inch. Same as left
Copy zoom 25% - 400% (0.1% step) 25% - 400% (1% step)
Resolution (dpi) Copier Scan : 600 x 600 Writing : 600 x 600Printer Writing : - North America 1,200 x 600 (or equivalent) - Japan/Europe 2,400 x 600 (or equivalent)
Reading : 600 x 600Writing : 600 x 600
Applicable copy paper size(Max.)
A3 or 11x17 inch. (Wide size paper :314x458mm) A3 or 11x17 inch.
Paper weight 50-210g/m2 50-130g/m2
Paper feed capacity 64g/m 2 1,250(550x2/ bypass 150) 1,090(520x2/ bypass50)
80g/m 2 1,150(500x2/ bypass 150) 1,050(500x2/ bypass 50)
Module 1 : Outline > 1. Overview
[For the details, see each chapter of CBT, Service Manual and User’s Guide.]
(1) Main Body Specifications -2
1.3 Main Specifications/Functions (2/7)
a. Basic specifications
500 420 7145 7235
Memory capacity (Standard) 192MB 64MB[Max.320MB]
Box function Available Same as left
User authentication Available Same as left
Power supply / consumption(Full option)
Japan AC 100V [50/60Hz]Less than 1,500W Same as left
North America
AC 120V [60Hz]Less than 1,560W
AC 120V [60Hz]Less than 1,500W
Europe, AP, other
AC 220-240V [50Hz]Less than 1,560W
AC 220-240V [50Hz]Less than 1,500W
Maintenance Every 250,000 copiesEvery
120,000 copies
Every 100,000 copies
Machine life(whichever comes first)
Number of copies 2,250,000 1,800,000 1,800,000 1,200,000
Period 5 years Same as left
AP: Asia Pacific
Module 1 : Outline > 1. Overview
(1) Main Body Specifications -3
1.3 Main Specifications/Functions (3/7)
b. RADF500/420 7145 7235
DF -607(Standard)
DF -318(Standard)
DF -320(Option)
Max.Original size A3, 11x17 Same as left
Originalweight
One side mode 35-128g/m250-130g/m2 35-130g/m2
Both side mode 50-128g/m2
Mixed originals Mixed original of different series is possible. Same as left
Possible loadage Max. 80 sheets (80g/m 2) Same as left
Transaction speed(A4, 8.5x11)
600 dpi (1:1) 50 sheets for one side25 sheets for both sides 45 sheets/min for one side
34 sheets/min for both sides300 dpi (1:1) 70 pieces for one side
Weight About 10kg Same as left
Module 1 : Outline > 1. Overview
(2) Option Specifications -1
1.3 Main Specifications/Functions (4/7)
500/420 7145 7235
LU-201 LT-203
Paper size (Max.) A4, 8.5x11 Same as left
Paper weight 60-105g/m2 Same as left
Paper feed capacity 2,100 sheets (64g/m2)
2,000 sheets (80g/m2)2,000 sheets (80g/m2)
Weight About 16kg About 13kg
a. Large capacity unit
Module 1 : Outline > 1. Overview
[For the details, see each chapter of CBT, Service Manual and User’s Guide.]
(2) Option Specifications -2
1.3 Main Specifications/Functions (5/7)
500/420 7145/7235
FS-510 FS-511 FS-114 FS-113
Type Built in type Floor type Built in type Floor type
A modeNon-sort / sort /Group / sortstaple
Non-sort / sort /Sort staple /Group staple
Non-sort / sort /Group / Sort staple Same as left
The greatest paper size
A3 wide(311x457mm),
11x17Same as left
An A3 Wide(314 x 457mm),
11x17A3,11x17
Possible loadage (A4)
Tray-1: 200 sheetsTray-2: 1,000 sheets
Non-sort tray: 250 sheetsElevator tray: 3,000 sheets
Tray-1: 200 sheetsTray-2: 1,000 sheets
Non-sort tray: 250 sheetsElevator tray: 3,000 sheets
Staple function Available(Max.50 sheets) Same as left Same as left Same as left
A punch function Available(Option) Available Available(Option) Available
Optional device MT-501,SD-502,PU-501,OT-601 --- SK-114,PK-114,
BK-114 ---
Weight About 21.4kg About 39.2kg About 21.4kg About 39.2kg
Necessity of Relay unit No Yes(RU-502) No Yes(RU-101)
b. Finisher
Module 1 : Outline > 1. Overview
(2) Option Specifications -3
1.3 Main Specifications/Functions (6/7)
c. A hard disk
500/420 7145/7235
HD-505 HD-103 Type-A
Disk capacity 40GB 20GB
Module 1 : Outline > 1. Overview
d. IC(Image controller) unit
==> Refer to Module 4(M4)
e. Fax function
==> Refer to Module 5(M5)
(3) Copy Consumables
1.3 Main Specifications/Functions (7/7)
500/420 7145 7235
TonerExclusive (new) Product name: TN511
Exclusive Exclusive
Developer
Exclusive (new) Product name: DV 511
Replacement interval All spec.: every 250,000 copies:
Exclusive
Replacement intervalAll spec.: every 120,000 copies
Exclusive
Replacement interval All spec.: every 100,000 copies
Drum
ExclusiveProduct name: DR510
Replacement interval All spec.: every 250,000 copies
Exclusive
Replacement interval All spec.: every 240,000 copies
Exclusive
Replacement interval All spec.: every 200,000 copies
Module 1 : Outline > 1. Overview
1.4 Unit Composition
1 Scanner section
2 Reverse/paper exit section
3 Fusing section
4 Photo conductor section
5 ADU
6 Transfer/separation corona section
7 Registration section
8 Bypass section
9 LU (Option)
10 PC (Option)
11 Paper feed section (Tray 1/2)
12 Developing section
13 Write section
14 Charge corona section
15 Toner supply section
16 Cleaning/toner recycle section
17 RADF
1
2
3456
78
910
11
12
13
1415
16
17
Module 1 : Outline > 1. Overview
1.5 Paper Feed Path (1/2)
LU-201Main body+PC-402+RU-502FS-511
Module 1 : Outline > 1. Overview
1.5 Paper Feed Path (2/2)
ADUFusing
ImagingPunchStaple
Main tray
Sub tray
A manuscript
RADF
OriginalCopy Paper2-sides copy
Tray 1
Tray 2
PC LU
Bypass
Fusing
Imaging
Module 1 : Outline > 1. Overview
LU-201Main body+PC-402+RU-502FS-511
2. Unpacking and Installation
Module 1 : Outline
DK-501 PC-202 PC-402
Dehumidifier Heater 1C
Machine
JS-502
FS-510 HD-505
FK-502MK-708
MT-501
PU-501
SD-502
OT-601
IC-204
2.1 Outline of System Installation Procedure
DF-607 Standard
LU-201
RU-502
FS-511
OT-501
Electrical option
Electrical option
When installing this machine and the options as a system, install them in the sequence shown on this list.
: Refer to Module4.: Refer to Module5.
Module 1 : Outline > 2. Unpacking and Installation
2.2 Installation Manual (1/2)
bizhub 500/420
Additional Info.LU-201
PC-202 FS-510
PC-402 PU-501
DK-501 MT-501
Dehumidifier Heater1C SD-502
Module 1 : Outline > 2. Unpacking and Installation
2.2 Installation Manual (2/2)
OT-601 HD-505
RU-502
FS-511
OT-501
JS-502
Module 1 : Outline > 2. Unpacking and Installation
2.3 Notes at Installation
Notes when installing the machine and options
Module 1 : Outline > 2. Unpacking and Installation
3. User Operation
Module 1 : Outline
3.1 Universal Design (1/5)
(1) Accessibility setting
Item
Key Reset Start/Interval Time
When touch the [+] or [-] keys on the Zoom screen, or when touch the [Light] or [Dark] keys on the Density screen,Specify the period of time to be elapsed before the current value begins to change.Specify the interval of time for the value to phase.
*Effective only when Enlarge Display mode.
Enlarge Display Timer Setting
When the System Auto Reset is functioned,Specify whether or not to display the enlarge display cancel screen.Specify the period of time for the enlarge display cancel screen.
*Effective only when Enlarge Display mode.
Message Display Time Specify the period of time for an error message to be displayed.
Sound Setting Specify whether or not to enable the key sound for the control panel and touch panel keys.
Touch Panel Adjustment Adjust the position of touch sensor.
Module 1 : Outline > 3. User Operation
3.1 Universal Design (2/5)
(2) Enlarge display mode
In Enlarge display mode, the letters of LCD screen get bigger. However, there are some restrictions on copy setting.
<Normal Display mode>
<Enlarge Display mode>
Module 1 : Outline > 3. User Operation
3.1 Universal Design (3/5)
(3) Tray 1/2/3/4 (Tray handle/Paper empty indicator)
Paper remaining amount: approx. 0%
7145/7222/7228/7235
Paper remaining amount:
approx. 60%
Paper remaining amount:
approx. 100%
Module 1 : Outline > 3. User Operation
3.1 Universal Design (4/5)
(4) Adjustable control panel angle
User can adjust the angle of the control panel. (3 levels)
Pull the control panel release lever, and then move the control panel slightly to upward or downward.
7 degrees 27 degrees 45 degrees
Module 1 : Outline > 3. User Operation
3.1 Universal Design (5/5)
(5) ADF (Machine status indicator/Original set label)
Machine status indicator Machine status
Green indicator blinks Copying, Receiving FAX, Outputting reports and PC-printing
Green indicator lights Output paper remains in tray or Mail-bin
Red indicator lights No paper in all trays, JAM, Toner empty and Full of Output tray-bin
Original set label
Module 1 : Outline > 3. User Operation
3.2 Control Panel (1/2)
(1) Layout of control panel key
Accessibility:Display the Accessibility screen.
Access:Allow to use the machine after User/Account authentication.
Enlarge Display:Display the Enlarge Display screen.
Contrast adjustment dial:Adjust the brightness of the touch panel.
Mode Check:Display the Mode Check screen and check the copy settings.
Mode Memory:Store/Recall the desired copy setting.
Module 1 : Outline > 3. User Operation
3.2 Control Panel (2/2)
(2) Power switch
Sub power switch
Main power switch
Counter
Module 1 : Outline > 3. User Operation
3.3 Copy Screen (1/4)
(1) Basic screen
Copy setting of Basic screen can be checked at a glance.
Set the Density, Paper, Zoom, Simplex/Duplex, Finishing, Folding, Separate Scan, and Save in User Box.
Module 1 : Outline > 3. User Operation
Panel Simulation
3.3 Copy Screen (2/4)
(2) Combine Originals screen
Set the Combine Pages, Mixed Original, Original Direction, and Margin.
Module 1 : Outline > 3. User Operation
Panel Simulation
3.3 Copy Screen (3/4)
(3) Original Image Type screen
Set the Original Image Type.
Module 1 : Outline > 3. User Operation
Panel Simulation
3.3 Copy Screen (4/4)
(4) Application screen
Set the Application setting.
Layer1 Layer2
Sheet/Cover/Chapter Insert OHP Interleave, Cover Mode, Insert Sheet, Insert Image, Chapters
Book Copy/Repeat Book Copy, Image Repeat, Booklet Pagination
Booklet
Neg-/Pos. Reverse
Page Margin
Erase Erase, Center Erase, Non-Image Area Erase
Image Adjustment Centering, No Rotate
Stamp Date/Time, Page #, Set Numbering, Built-in Stamp, Watermark
Module 1 : Outline > 3. User Operation
Panel Simulation
3.4 Help Screen
(1) Help menu
Display the Help screen.
Information of the following functions:Copy, Scan, Fax, Box, Job List
Name and function of each part:ADF, original glass, control panel keys, bypass tray, main body tray, LCT output tray, finisher
Service/Administrator Information:Name, extension number and e-mail address of the Service representative or administrator
Maintenance:How to add toner, add staples and empty punch waste basket
Module 1 : Outline > 3. User Operation
3.5 Utility/Counter Screen (1/5)
(1) Meter Count
Check the Meter Count.
Module 1 : Outline > 3. User Operation
Panel Simulation
3.5 Utility/Counter Screen (2/5)
(2) User Setting screen
Set the User setting.
(For details of One-Touch Registration, please see the Module 4.)
Module 1 : Outline > 3. User Operation
User Setting List
Panel Simulation
3.5 Utility/Counter Screen (3/5)
(3) Administrator Setting screen
Set the Administrator setting.
Module 1 : Outline > 3. User Operation
Administrator Setting List
Panel Simulation
3.5 Utility/Counter Screen (4/5)
(4) User Authentication/Account Track
This setting is specified to manage users and accounts.
Only User Authentication set ON Only Account Track set ON
Manage the count of each user. Manage the count of each account.
Both User Authentication and Account Track set ON; synchronize
Both User Authentication and Account Track set ON; not synchronize
Manage the count of the user, and then automatically manage the count of the account which he/she belongs to. Only User Authentication is required when the user logs in.
Manage the count of the user, and manage the count of the account which the user login. Both User Authentication and Account Track are required when the user logs in.
UserA
UserB
UserC
UserD
UserE
Account A Account B Account C
Account A Account B Account C Account A Account B Account C
UserA
UserB
UserC
UserD
UserE
UserA
UserB
UserC
UserD
UserE
Module 1 : Outline > 3. User Operation
3.5 Utility/Counter Screen (5/5)
(5) Administrator Security Level
This setting enables users to set some of administrator settings.
Module 1 : Outline > 3. User Operation
Panel Simulation
End
Module 1 : Outline
Go to Top Page