M MakerAZ

M1911A1 DisplayStand

VIEW IN BROWSER

updated 20. 7. 2019 | published 20. 7. 2019

7 hrs

1 pcs

f

0.20 mm

k

0.40 mm

h

PLA

79 g

d

MK3/S

Print Files (.gcode) DOWNLOAD ALL FILES

43.7 MB

7.20 hrs f 0.20 mm k 0.40 mm h PLA 79.00 g d MK3/S

updated 20. 7. 2019

PRUSAPRINTERS

Summary

Custom stand I designed to hold/display my M1911 Pistol collection.Designed using Fusion 360 and sliced with Prusaslicer. Final design holdspistol in a level attitude and shows off the pistol nicely.

Hobby & Makers > Other Ideas

m1911-display-stand1-piecern-v1_02mm_pla_mk3s_7.gcode

Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES

358.3 KBupdated 20. 7. 2019

License

This work is licensed under a Creative Commons (4.0 International License)

Attribution—Noncommercial—Share Alike

✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition

m1911-display-stand1-piecern-v1.stl