M14 Item Stock Numbers - imageseek.com Item Stock Numbers 070624.pdf · M14 ITEM STOCK NUMBERS 3 Table 1: Complete Rifles Description Part Number FSN or NSN Comments M14 Rifle 7267000

M14 Item Stock Numbersby

Lee Emerson

06/24/07

This document is derived from the 06/24/07 draft of the Third Edition of M14 Rifle History and Development by Lee Emerson copyright 2007. Most of the historical data has been omitted and book marks have been added to facilitate ease of use. Some items are specific to a particular model of the M14 rifle. In such cases, the item Description or Comments will state which model, e.g., M14 NM Rifle.

Permission is granted to reproduce this document for use by active duty military personnel in the performance of their duties. The author may contacted by e-mail at [email protected]

FSN, NSN, SNL, FSC and CAGE: The four alphanumeric character code starting with “B”, such as B053 found at the end of the stock number was from the Standard Nomenclature System (SNL). Each four character signified what system the part was for, e.g., B053 was the M14 Rifle. The SNL four character code appears on some M14 parts packaging until the mid-1960s. The acronyms for Federal Stock Number and National Stock Number are FSN and NSN, respectively. If a NSN is not available for a part, the FSN is listed if it ever existed.

In the early 1970s, a two digit Nation Code was added between the first four digits and the three digit string. The United States uses 00 and 01 for its Nation Code. With implementation of a Nation Code, the National Stock Number system was established. Example:

Federal Stock Number for the M14 gas cylinder = 1005-790-8766

National Stock Number for the M14 gas cylinder = 1005-00-790-8766

Some of the M14 Rifle items may no longer be in the U. S. military or federal supply system. An example is the 1960s production wood M14 stock. The first four digits of the FSN and NSN is the Federal Supply Code (FSC). Two examples are 1005 for small arms through 30 mm and 9150 for lubricants.

Sometimes the government contractor for a part can be identified by a code on the packaging. This five alphanumeric character code is known as the Commercial and Government Entity (CAGE) Code. Each contractor is assigned its own unique CAGE Code. For example, 3A5E1 is Smith Enterprise, Inc. in Tempe, AZ.

Abbreviations used in this document:

FSN = Federal Stock Number

M14 = M14 Rifle

M14 DMR = M14 DMR Rifle

LEE EMERSON

M14 M = M14 M Rifle

M14 NM = M14 NM Rifle

M14 SMUD = M14 SMUD Rifle

M14A1 = M14A1 Rifle

M14 SSR = M14 SSR Rifle

M21 = M21 Rifle

Mk 14 Mod 0 = Mk 14 Mod 0 Rifle

XM21 = XM21 Rifle

NM = National Match

NSN = National Stock Number

USAF = United States Air Force

USN = United States Navy

2

M14 ITEM STOCK NUMBERS

Table 1: Complete Rifles

Description Part Number FSN or NSN Comments

M14 Rifle 7267000 1005-00-283-7695 1005-00-770-3559

M14 Rifle with equipment

8413866 1005-00-589-1271 equipment includes sling, four magazines, combination tool and cleaning kit

M14 Rifle Group A 1005-LL-H18-7614 (NSN issued by the U. S. Navy)

U. S. Navy issue, double lugged receiver, fiberglass stock, heavyweight match grade barrel

M14 Rifle Group B 1005-LL-H18-7615 (NSN issued by the U. S. Navy)

U. S. Navy issue, rear lugged receiver, wood or fiberglass stock, heavyweight match grade barrel

M14 Sniper Kit 1005-01-106-8975 U. S. Navy issue, includes sling, two magazines, scope and mount, cleaning kit, and aluminum carrying case

M14 M Rifle with equipment

7790485 5910842

1005-00-678-9829 issued with sling and magazine

M14 NM Rifle 7790476 9386974

1005-00-678-9828

M14 NM Rifle with equipment

5910841 1005-00-678-9828 issued with sling and magazine

M14 NM Rifle with M84 scope

1005-937-8777

M14A1 Rifle without bipod and sling

11010000

3

LEE EMERSON

M14A1 Rifle with equipment

11010108 1005-00-072-5011 issued with sling, magazine and bipod

M14E2 Rifle with equipment

8427044

M14 DMR Rifle 98003A0000 1005-01-458-6235 U. S. Marine Corps issue

M14 SMUD with equipment

EOD-M14 1005-01-255-3311 U. S. Air Force issue, issued with telescope sight, scope mount and padded carry case

M14 HGM14SEMI 1005-01-494-4169 U. S. Air Force issue, Honor Guard semi-automatic only

M14 7267000 1005-00-283-7695 demilitarized for Junior Reserve Officer Training Corps

M14SSR 1005-LL-L99-5690 (NSN issued by the U. S. Navy)

U. S. Navy issue

M21 Rifle with equipment

9386973 11838704

1005-00-179-0300 XM21 and M21, issued with telescope sight, scope mount, sling, magazine, and cleaning kit

M25 (Sniper Rifle M14)

1005-LL-L99-5690 (NSN issued by the U. S. Navy)

replaced by the Mk 11 Mod 0

Mk 14 Mod 0 1005-01-525-7718 1005-01-531-7324

U. S. Navy issue

4


Table 2: Rear and Front Sights


elevation knob assembly

7267099 5355-00-628-9047 calibratred in meters

elevation knob lock washer

11010359MS 35335-31

elevation knob indexing dog assembly

11010362

elevation knob screw blank

7267096

elevation knob indexing dog

7267097

elevation knob 7267098

elevation pinion assembly

11010363 5355-00-999-3399

windage knob assembly

7312737 5355-00-731-2737

windage knob nut 7312726

windage knob nut lock

7312731

windage knob spring

7312732

windage knob assembly, NM

7790386 5355-00-649-9275

windage knob, NM 7790358

rear sight aperture 6008868 1005-00-600-8868

rear sight base 5546001 1005-00-554-6001

rear sight base, NM 7791341 1005-875-6281 marked NM/2, undercut for hooded aperture

rear sight base, NM 7791571 5340-00-754-6799 marked NM/2A

rear sight cover 6008872 1005-00-600-8872

5

LEE EMERSON

rear sight eyepiece, NM

7791131 marked 595, 0.0595 " peep hole

rear sight eyepiece assembly, NM

7791132

rear sight aperture assembly, NM

7791133 1005-00-864-2926 0.0595 " peep hole

rear sight eyepiece, NM

7791281 marked 520, 0.0520 " peep hole, alternate design

rear sight aperture assembly, NM

7791282 1005-00-864-2928 0.0520 " peep hole, alternate design

rear sight aperture, NM

7791134

rear sight eyepiece spring, NM

7791135 two coil springs

rear sight eyepiece ball bearing, NM

MS 19060-1 two required

rear sight eyepiece spring, NM

7791136 one cone disk spring

rear sight eyepiece retaining ring, NM

MS 16624-18

front sight, NM 7791122 1005-00-980-5203 marked NM 062

front sight, standard

7790233 early version

front sight, standard

7791445 1005-00-084-8435 late version

front sight screw 96906-35460-3 MS 35460-3

5305-00-655-9483 early version, 3/32 " socket cap screw, 40 NF x ½ " long

front sight screw 11010298 5305-00-921-6155 late version, 7/64 " socket cap screw, 40 NF x ½ " long

front sight screw MS 16998-11 5305-983-6650 late version, 7/64 " socket, cadmium plated

6


Table 3: Receiver Assembly


selector shaft pin 96906-16562-107 MS 16562-107

5315-00-051-6891 interchangeable with the spindle valve pin and connector pin, 5/64 " diameter x 3/8 " long

selector lock 7267172 1005-00-587-8420 standard for M14, M14 M and M14 NM

selector switch 7267071 1005-00-587-8408 standard for M14A1, optional for M14 in lieu of selector lock

selector shaft spring

7267081 5360-00-587-8415 standard for M14A1, optional for M14 in lieu of selector lock

selector shaft 7267072 3040-00-587-8409

sear release 7790192 1005-00-628-9053

bolt lock pin 96906-16562-124 MS 16562-124

5315-00-839-0897 3/32 " diameter x 1 " long

bolt lock 7267034 1005-00-587-8390

bolt lock spring 7267074 5360-00-587-8411

connector lock pin 7267042 5315-00-587-8396

connector lock 7267035 1005-00-587-8391

cartridge clip guide pin

96906-16562-120 MS 16562-120

5315-00-051-86365315-00-058-6065

3/32 " diameter x 9/16 " long

cartridge clip guide 7790184 1005-00-628-9049

barrel and receiver assembly

7790191 chromium plated barrel

barrel and receiver assembly, NM

9352636

receiver lug 9352637 1005-01-267-2167

7

LEE EMERSON

Table 4: Gas System

barrel and receiver assembly, NM

7791363 receiver with non-plated standard contour barrel

receiver 7790189 1005-628-9052

Description Part Number NSN Comments

gas cylinder plug 7267053 1005-00-587-8400

gas cylinder piston 7267047 1005-00-587-8398

gas cylinder piston, NM

9352724 gas piston with axial groove

gas cylinder lock 7790188 1005-00-628-9051

gas cylinder 7267013 early version with no lip

gas cylinder 7790902 1005-00-790-8766 late version with lip

gas cylinder and band assembly, NM

9352725 M14 NM

gas cylinder and band assembly, M14 DMR

98003A1002 1005-01-472-3924 M14 DMR

spindle valve pin 96906-16562-107 MS 16562-107

5315-00-051-6891 interchangeable with the selector shaft pin and connector pin, 5/64 " diameter x 3/8 " long

spindle valve pin MS 171401 M14 DMR

spindle valve (gas cutoff valve)

7267604 1005-00-587-8421

spindle valve spring 7267605 5360-00-587-8422

front band 7267001 1005-00-587-8375

8


Table 5: Barrel and Flash Suppressor Assembly


operating rod guide pin

MS 16562-130 first version


96906-51923-465MS 51923-465

5315-00-923-9440 1/8 " diameter x 3/4 " long


96906-51923-291MS 51923-291

5315-00-993-3247 1/8 " diameter x 3/4 " long

operating rod guide 7267025 1005-00-587-8385

operating rod guide, NM

9349846

barrel, chromium plated

7790190 1005-00-628-9052

barrel, NM 7791173 chromium plated standard contour

barrel, NM 7791362 1005-00-018-3255 non-plated standard contour

barrel, NM 9345206 1005-01-120-4513 non-plated medium weight contour

barrel, NM 9349847 non-plated heavyweight contour

barrel assembly, NM

9362529 1005-01-272-0970 non-plated heavyweight contour barrel with operating rod guide

barrel, M14 DMR 98003A1220 1005-01-470-6710 M14 DMR, non-plated medium weight contour barrel

flash suppressor set screw

7790300 MS 51976-16

5305-01-221-3230 late version, full dog point, make from 6-40 x 0.25 " set screw, tip is 0.092 ” diameter x 0.070 " long

9

LEE EMERSON

Table 6: Bolt Assembly

flash suppressor nut

7267039 1005-00-587-8394

flash suppressor 7267088 early version

flash suppressor 7791053 1005-00-545-1573 late version

flash suppressor, NM

9352718 1005-01-267-2093 M14 NM

flash suppressor, M14 DMR

98003A1001 1005-01-471-3532 M14 DMR


bolt 7790185 issued without bolt roller attached

bolt with roller 7790186 1005-00-628-9050

bolt assembly 7790187

bolt roller 7267065 1005-00-587-8405

bolt roller retaining ring (bolt roller retainer)

7267059 1005-00-587-8402

extractor, early 5546003 1005-00-554-6003 M1/early M14 extractor

extractor, early modified

5546003 1005-00-554-6003 early M14 extractor with field modification (1/64 " of the bottom corner of the claw filed away)

extractor, late 7791578 1005-00-953-9504 late M14 extractor

10


extractor, M14 DMR

98003A1231 1005-01-472-3098 M14 DMR

extractor spring 6008886 5360-00-600-8886

extractor spring plunger

5013671 1005-00-501-3671

extractor spring with plunger

6008618 5340-00-600-8618

ejector 7267014

ejector spring 7267959

ejector with spring 7267015 1005-00-587-8381

firing pin 7267043 1005-587-8397 first version, non-plated

firing pin 7791417 1005-00-962-8344 second version, chromium plated tip

firing pin 11686413 1005-00-921-5248 third version, 100 % chromium plated

11

LEE EMERSON

Table 7: Operating Rod Group


connector assembly

7267012 early style with slot for the connector lock

connector assembly

7790424 3040-00-678-9824

connector assembly

98003A1004 1005-01-472-3121 M14 DMR

connector pin 96906-16562-107MS 16562-107

5315-00-051-6891 interchangeable with spindle valve pin and selector shaft pin, 5/64 " diameter x 3/8 " long

connector plunger 7790426 5340-00-678-9826

connector spring 7790427 5340-00-678-9827

connector body 7790425 1005-678-9825

operating rod spring guide

7267027 1005-00-587-8386

operating rod spring guide, NM

9352726

operating rod spring guide, M14 DMR

98003A1005 1005-01-472-3905 M14 DMR

operating rod spring

7267079 5360-00-587-8413

operating rod 7267064 1005-00-587-8404

12


Table 8: Firing Mechanism


complete firing mechanism

7790195

complete firing mechanism, NM

9354354

sear 7267070

sear, NM 5546016 semi-automatic fire only

trigger 5546020

trigger pin 5013669 5315-00-501-3669 early version

trigger pin 7791367 5315-00-819-4501 late version

sear pin 5013673

trigger and sear assembly

7267090 1005-00-587-8419


5546026 1005-00-554-6026 M14 NM and M21


98003A3001 1005-01-471-1810 M14 DMR

hammer spring housing

6008883 1005-00-600-8883

hammer spring housing, NM

8448292

hammer spring 6008887 5360-00-600-8887

hammer spring plunger

6008880 5340-00-600-8880

13

LEE EMERSON

hammer spring plunger, NM

8448692 1005-01-154-8337

hammer pin 5013668 5315-00-501-3668 0.187 " diameter x 3/4 " long under head

hammer 5546008 1005-00-554-6008

hammer, NM 8448293

safety 5546015 1005-00-554-6015

safety spring 7267080 5360-00-587-8414 M1 rifle clip ejector can be cut to 1.1 " length as an emergency repair

trigger guard 7790194 1005-628-9054 early style with hammer stop pin

trigger guard 7790990 1005-00-587-6988 late style with bent tab

trigger housing assembly

77901968448290

1005-00-628-9055

trigger housing 7267030

magazine latch pin MS 9047-102 early version

magazine latch pin 7791418 5315-00-994-4242 late version, 0.121 " diameter x 0.640 " long

14


Table 9: M14 Stock and Hand Guard

magazine latch 7267032 1005-00-587-8389

magazine latch spring

7267041 1005-00-587-8395


butt stock sling swivel

6008889 1005-00-600-8889

lower butt screw 6008881 5305-00-600-8881 slot drive, 0.216 " diameter x 28 NF-2A x 3.171 " long

upper butt screw 6146873 5305-00-614-6873 M14A1 and wood stock with M1 rifle butt plate

upper butt screw 7791036 5305-00-474-2754 0.212 " diameter, 10 threads per inch, 1.140 " grip length, 2.136 " long, for wood stock with hinged butt plate

upper butt screw 7791267 5305-00-999-1875 for production reinforced fiberglass stock

upper butt screw nut retainer

11010414 5340-00-999-1864 for production reinforced fiberglass stock

upper butt screw nut (10-32 threads)

7791339 5310-00-999-1891 for production reinforced fiberglass stock, 10 - 32 square nut

wood stock that fits the M1 rifle butt plate

7267083 T44E4 bare walnut stock

15

LEE EMERSON

wood stock that fits the M1 rifle butt plate

7267084 T44E4 walnut stock with butt plate, ferrule, front and rear sling swivels, stock liner and liner screws

wood stock assembly

7790702 M14 stock includes the front and rear sling swivels, stock liner, liner screws, ferrule and butt plate assembly

wood stock subassembly

7790810 M14 stock subassembly for 7790702, includes stock, ferrule, front sling swivel, stock liner and liner screws

wood stock, NM 7791174 M14 NM bare stock for 7791175 and 11010282

wood stock assembly, NM

7791175 M14 NM stock includes front and rear sling swivels, ferrule, stock liner, liner screws and butt plate assembly

wood stock subassembly, NM

7791280 M14 NM stock subassembly for 7791175, includes front sling swivel, ferrule, stock liner and liner screws

wood stock, NM 9352638 1005-01-233-8635 M14 NM bare stock for 9392337, routed for bedding


9381706 M14 NM stock subassembly for 9392337 with front sling swivel, ferrule, and routed for bedding

16



9392337 M14 NM stock with front and rear sling swivels, ferrule, butt plate assembly, routing and bedding

wood stock 11010262 M14 stock includes ferrule

wood stock 11010263 1005-754-6462 M14 and M14 NM bare stock


11010281 M14 NM stock includes front and rear sling swivels, ferrule, stock liner, liner screws, butt plate assembly, routing and bedding


11010282 1005-00-912-3711 M14 NM stock subassembly includes stock, ferrule, stock liner, liner screws and routing, replaced 7791175

stock liner 7267033 early version

stock liner screw 7267063 two per wood stock, 10-32 threads, 7/16 " overall length

stock ferrule 7267017 M14 and M14A1

stock ferrule 9352720 1005-01-271-1027 M14 NM stock 9392337

stock rivet, tubular oval head

7790473MS 16535-302

M14 wood stock

stock rivet, tubular oval head

11010260MS 16535-307

5320-01-272-5023 M14 reinforced fiberglass stock

stock rivet, solid, belt

MS 35745-18 M14 NM and M21

stock rivet burr 7790474 5310-00-072-5381

17

LEE EMERSON

sling swivel bracket 7267007

sling swivel loop 7267037

sling swivel loop assembly

7267089 1005-00-919-7278 M14

sling swivel loop assembly

9352716 1005-01-271-1029 M14 NM

pin, straight, knurled

11010261 M14 reinforced fiberglass stock pin inside the butt stock

screw retaining plate

7791340 reinforced fiberglass stock plate inside the grip

production reinforced fiberglass stock

11686426

production reinforced fiberglass stock subassembly

11686427 stock with ferrule

production reinforced fiberglass stock assembly

11686428 stock includes the butt plate, front sling swivel and ferrule

production reinforced fiberglass stock subassembly

5910348 1005-00-999-1871 subassembly consists of stock, upper butt screw, nut retainer and nut

hand guard band 6008870 also known as hand guard clip

hand guard assembly

7267021 1005-587-8382 walnut hand guard with metal clip

hand guard assembly

7790689 1005-690-4068 slotted fiberglass hand guard with metal clip

hand guard 7791285 solid fiberglass hand guard,

hand guard, NM 9352722 M14 NM

18


Table 10: M14 Stock Butt Plate Assembly

hand guard assembly

7791286 1005-856-2108 1005-00-856-2108

solid fiberglass hand guard with metal clip

hand guard assembly, NM

9352721 M14 NM

hand guard assembly, M14 DMR

98003A1008 1005-01-472-3209 M14 DMR


M1 butt plate assembly

5564277 1005-556-4277 for early M14 stock with M1 butt plate

M1 butt plate hinge pin

5152865 5315-515-2865 interchangeable with M14 stock butt plate door pin, 0.126 " diameter x 1.00 " long

M1 butt plate plunger


M1 butt plate catch spring


M1 butt plate door 6147465 1005-614-7465 for early M14 stock with M1 butt plate

M1 butt plate 5564283 1005-556-4283 for early M14 stock with M1 butt plate


7790686 1005-00-690-4067

M14 butt plate hinge pin

7790695 5310-00-981-1254

M14 butt plate stop pin

7790695 1005-00-981-1254

19

LEE EMERSON

M14 butt plate 7790696

M14 butt plate rest 7790697 1005-00-981-1255 also known as butt plate flapper

M14 butt plate ball bearing

96906-19059-49 MS 19059-49 96906-19059-88 MS 19059-88

3110-00-100-6151

M14 butt plate hinge spring

5013747 5360-00-501-3747

M14 butt plate door pin

96906-16562-98 MS 16562-98

5315-00-597-5086 1/16 " diameter x 3/8 " long

M14 butt plate door catch

7790693 1005-00-981-1252

M14 butt plate door catch spring

7790699 5360-00-981-1256

M14 butt plate catch pin

5152865 5315-00-515-2865

M14 butt plate door plunger

7790698

M14 butt plate door 7790692

M14 hinge block 7790691


7790700

20


Table 11: M14A1 Stock Assembly

M14 hinge transition piece

7790914 black soft rubber filler block that allows use of the M1 rifle butt plate on a standard M14 stock, not the same as the hinge inlet protector part number 7791050


stock assembly 7791671 M14E2 and M14A1, early version

stock assembly 11686528 M14A1, late version

stock 11686526 M14A1, late version

stock liner plate 7790200

stock liner 7790202

stock liner assembly

7790201 late version

stock liner screw 7267063 two required, 10-32 threads, 7/16 " overall length

recoil pad plug 7791674 1005-00-072-5386 two required, lusterless black color

lower recoil pad screw

7791676 5305-00-072-5388

21

LEE EMERSON

butt stock sling swivel bushing

11010047 5325-00-072-5379

butt stock sling swivel

11010046 1005-072-5378

upper recoil pad screw

7791677 5305-00-072-5389

recoil pad 7791673 1005-00-072-5385 early version made of natural rubber, late version made of synthetic rubber to minimize deterioration from oil and cleaning liquids, lusterless black color

butt plate bracket screw

6146873 5305-00-614-6873 two required

butt plate flapper assembly

7791678 1005-00-072-5390

butt plate flapper pin

7791682 5315-00-016-2624

butt plate flapper (shoulder rest plate)

7791683

butt plate bracket 7791680

butt plate bracket pin

7791681

butt plate bracket assembly

7792062

hand grip rubber bumper

11010048 1005-072-5380 for early stock burr version, four required

22


hand grip rubber bumper or grommet

11686524 5340-00-904-9303 for late stock burr version, four required

hand grip screw 7791675 1005-072-5380 for early stock burr version, two required

hand grip screw 11686523 5305-00-956-3401 for late stock burr version, two required

hand grip lock washer

96906-35335-32 MS 35335-32 or MS 35335-46

5310-00-596-7691 for early stock burr version, two required, No. 10 screw size

hand grip lock washer

96906-35336-21 MS 35335-21

5310-00-194-9209 for late stock version burr, two required

stock assembly burr

7790474 5310-00-072-5381 early stock version burr, two required

stock assembly burr

11686522 1005-00-951-3254 late stock version burr (backing plate), one required

hand grip assembly 11010044 1005-00-072-5377

hand grip latch assembly

11010045

upper hand grip pin 96906-39086-205MS 39086-205 or MS 16562-143

5315-00-846-5998 3/16 " diameter x 7/8 " long

hand grip subassembly

7791672 1005-016-2623

23

LEE EMERSON

lower hand grip pin 96906-39086-211 MS 39086-211 or MS 16562-147

5315-00-269-4080 0.187 " diameter x 1.750 " long

hand grip locking pin

11010002

hand grip locking spring

11010003

hand grip pin for locking pin and spring

MS 16562-95 or MS 39086-50

5315-00-845-7021

hand grip body 11010050

hand grip 11010001

front sling swivel pin

96906-39086-202 MS 39086-202 or MS 51923-252

5315-00-050-1233 3/16 " diameter x ½ " long

front sling swivel 6008890 1005-00-600-8890

hand grip block 11010004 1005-00-016-2621

stock subassembly 7791679 1005-072-5391 early stock subassembly includes stock, stock liner and liner screws

stock subassembly 11686527 late stock subassembly includes stock, ferrule, stock liner and liner screws

24


stock subassembly 5910438 1005-00-999-4200 includes stock, four late style hand grip rubber bumpers, two late style hand grip screws, two late style hand grip lock washers, and one late style burr (backing plate)

M14E2/M14A1 sling

11010038 1005-00-072-5376 64.5 " long, essentially a M1918 Browning Automatic Rifle sling with an extra standard sling hook

M14E2/M14A1 sling keeper assembly

8436759 5340-01-006-5806

M14E2/M14A1 sling assembly

7149752

M14E2/M14A1 hook assembly

7136183 two required

25

LEE EMERSON

Table 12: M14 DMR Stock Assembly


cheek rest, adjustable (cheekpiece)

98003A2104 1005-01-470-6741

stock 98003A2101 McMillan Fiberglass Stocks M2A model

escutcheon 98003A2002 1005-01-470-9632

stock ferrule 9352720 1005-01-271-1027

bipod mounting stud

98003A2003 5307-01-472-3395

front sling swivel screw

98003A2004 5305-01-472-3539 two required

front sling swivel, M14 DMR

98003A2001 1005-01-472-4551

rear sling swivel 6008889 1005-00-600-8889

cheek rest screw (cheekpiece screw)

98003A2105 5305-01-472-3465 two required

rear sling swivel screw

98003A2005 5305-01-472-3465

butt pad spacing (butt pad spacer)

98003A2103 1005-01-470-7122 two available, ½ "

butt pad spacing (butt pad spacer)

98003A2107 1005-01-470-7096 two available, ¼ "

butt pad 98003A2102 1005-01-470-7096

butt plate screw (screw, machine, rear butt plate)

98003A2106 5305-01-470-7017 two required

26


Table 13: Twenty Round Magazine

Table 14: M2 Bipod


magazine assembly

7790183 1005-00-628-9048

magazine base 7790182

magazine spring 7267078

magazine follower 7267018

magazine follower assembly

7267019

magazine follower stop

7267085

magazine tube 7790197

magazine latch plate

7791098


M2 bipod assembly 7790688 1005-00-711-6202 some bipods are stamped 7790833, W.M.I. marking denotes foreign manufacture

pivot plunger pin 96906-16562-96 MS 16562-96

5315-00-282-3642 two required, 1/16 " diameter x ¼ " long

pivot plunger pin 7790820 5930-00-772-6361 two required

27

LEE EMERSON

pivot plunger spring 7790824 5360-00-772-6365 two required

pivot plunger 7792846 5340-00-740-053 two required

leg plunger pin 96906-16562-99 MS 16562-99

5315-00-514-2358 two required, 1/16 " diameter x 7/16 " long

leg extension plunger


leg extension spring

7790838 5360-00-897-6156 two required

leg extension plunger housing


shaft stop pin 96906-39086-88 MS 39086-88

5315-00-839-2327 two required, 1/8 " diameter x 3/8 " long

leg screw MS 16997-9 5305-00-978-9342 4-40 threads x ¼ " long, two required

leg screw nut MS 35649-244 5310-00-167-1376 4-40 threads hex head nut, two required

right leg assembly 7790822 1005-00-772-6363

right shaft assembly

7790840

right leg extension assembly

7790839

right leg extension shoe (pad)

7790844

right leg extension tube

7790845

28


left leg assembly 7790821 1005-00-772-6362

left shaft assembly 7790837

left leg extension assembly

7790835

left leg extension tube

7790843

left leg extension shoe (pad)

7790842

yoke assembly 7791106

cotter pin MS 24665-149 early version, used for bipod without swivel

cotter pin 96906-24665-151 MS 24665-151

5315-00-815-1405 late version, 1/16 " x 3/8 " long

yoke assembly pin 7791104 5315-474-4115 (cancelled by adoption of the long pin 7791669)

short pin that won’t allow installation of the sling swivel, 0.217 " diameter, 1.041 " effective length, 1.25 " nominal length, 0.078 " cotter pin hole diameter

yoke assembly pin 7791669 5315-00-072-5383 long pin that will allow installation of the sling swivel, 0.217 " diameter, 1.326 " effective length, 1.53 " nominal length, 0.078 " cotter pin hole diameter

29

LEE EMERSON

bipod sling swivel 7791670 1005-00-072-5384

left jaw 7791102 1005-00-474-4116 the jaws were improved in the period 1966 to 1967

right jaw assembly 7791107 1005-00-474-4118

self-locking bolt 7791103 5306-474-4114 5/16 " diameter - 24 UNF x 3/4 " long self-locking hex head bolt with nylon insert

right jaw 7791101 the jaws were improved for better grip in the period 1966 to 1967

welded head assembly

7792847

30


Table 15: Organizational Maintenance Items


fabric envelope, two button

7228907 1005-00-722-8907 3 " x 4 7/8 "

flash suppressor nut wrench

7790315 4933-652-9949 predecessor to 7790493

flash suppressor nut pliers

7790493 5120-00-690-3497 6 ¼ " overall length

ruptured case extractor

7790352 4933-00-652-9950

barrel reflector 7265789 1005-00-786-5789 early version

barrel reflector 7790138 4933-00-628-9700 late version

M2 aiming device 6174998 1005-617-4998

M15 sighting device

7160903 6910-00-716-0903 cardboard, 3 ½ " x 7 "

M63 dummy cartridge

7553706 training device

brush, artist 96906-16840 MS 16840

8020-00-244-0153 7/16 " wide x 1 1/8 " long

brush, cleaning 96906-16746-29 MS 16746-29

7920-00-205-2401 1 1/16 " diameter x 2 7/8 " long

brush, camel hair 7920-00-205-0565 M14 DMR

brush, cleaning 8448462 1005-00-494-6602 M14 DMR, Mk 14 Mod 0

carbon removing compound

6850-00-965-2332 P-C-111 and others

cleaning compound solvent (rifle bore cleaner)

6850-00-224-6656 MIL-PRF-372, 2 ounces can


6850-00-224-6657 MIL-PRF-372, 6 ounces can

31

LEE EMERSON


6850-00-224-6658 MIL-PRF-372, 1 quart can


6850-00-224-6663 MIL-PRF-372, 1 gallon can

cleaning compound solvent

6850-01-381-4401 Mk 14 Mod 0, Skysol 100


7930-01-342-5316 Mk 14 Mod 0, Simple Green, 5 gallon container


7930-01-306-8369 Mk 14 Mod 0, Simple Green, 1 gallon container


7930-01-342-5317 Mk 14 Mod 0, Simple Green, 24 ounce bottle

bore cleaner Mk 14 Mod 0, Shooters Choice, gallon size

gun grease Mk 14 Mod 0, Shooters Choice

abrasive cloth 5350-00-221-0872 9 " wide x 11 " long, 42-C-20420-50

fluorescent coating compound

8010-00-811-1845 red orange, 1 quart can, MIL-P-21563 No. 633

dry cleaning solvent

6850-00-281-1985 1 gallon can, PS661

grease, automotive and artillery

9150-01-197-7693 14 ounce cartridge, MIL-PRF-10924-G

grease, rifle 9150-00-248-3480 (replaced by 9150-00-754-0063)

2.5 cm3 plastic container with yellow cap

32


grease, rifle 8448693 9150-00-754-0063 see latest edition of QPL-46003 for current qualified product

linseed oil, raw 8010-00-221-0611 1 gallon can, TT-L-00215

lubricating oil, general purpose

9150-00-273-2389 4 ounces can, PL Special

lubricating oil, general purpose

9150-00-231-6689 1 quart can, PL Special

lubricating oil, semi-fluid

8436792 2 ounces flat oval bottle, support level not available

lubricating oil, weapons

9150-00-292-9689 1 quart can, for below zero degrees operations

cleaner, lubricant and preservative

9150-01-102-1473 M14 DMR, ½ ounce bottle


9150-01-054-6453 Mk 14 Mod 0, 1 pint bottle, MIL-PRF-63460


9150-01-079-6124 Mk 14 Mod 0, 4 ounce bottle


9150-01-053-6688 Mk 14 Mod 0, 1 gallon can

bedding compound M14 DMR, Marine- Tex, gray, 1 pound

clay, modeling 7510-00-275-2679 M14 DMR, 1 pound

mold release compound

8030-01-064-4951 M14 DMR, can

shim stock M14 DMR

paper, lens 6640-00-663-0832 M14 DMR, pack of 50 sheets

rag, wiping DDD-R-30 7920-00-205-1711 50 pound bale, cotton, A-A-2522

33

LEE EMERSON

Table 16: Direct Support Maintenance Items

swab, small arms cleaning

5019316 1005-00-288-3565 2 ½ " x 2 ½ ", cotton, 1 pack

acetone 6810-00-223-2739 M14 DMR, 1 quart


tool and gage set for direct, general and depot maintenance

8421895 4933-00-647-3703 7.62 MM Rifle, M14 Series

field maintenance gage case

7799702 5220-00-678-9830

breech bore field reject gage

7274761 5220-00-647-3697 limit 0.310 ", marked top line -RIFLE 7.62 MM, M14 second line - BREECHBORE

field test gage bolt 7274799 5220-00-647-3699 0.615 " right lug, 0.575 " left lug

head space field reject gage

7274790 5220-00-647-3698 limit 1.6455 "

gas piston snap gage

7274757 5220-00-647-3695 NO-GO, 0.4968 " piston diameter

gas cylinder plug gage

7274755 5220-00-647-3693 NO-GO, 0.5009 " piston hole diameter

firing pin protrusion gage

7274736 5220-00-345-6122 0.044 " minimum, 0.060 " maximum

firing pin hole plug gage

7458406 5220-00-917-1067 NO-GO, 0.083 " maximum

flash suppressor alignment tool

7799705 4933-00-856-2561

flash suppressor nut pliers

7790493 5120-00-690-3497

bolt roller retaining ring pliers

7799723 5120-00-563-0436

34


Table 17: General Support (Depot) Maintenance Items

hex head wrench,7/64 ”

5120-00-889-2162 for late front sight screw part number 11010298

head space gages 5220-00-921-6054 set of nine gages, 1.630 " to 1.638 ", USMC M14 DMR

3/8 " combination open end and socket end wrench

USMC M14 DMR

gas cylinder lock tool (wrench)

locally fabricated, USMC M14 DMR intermediate level item

Dremel Moto-Tool kit

5120-01-014-6856 USMC M14 DMR

test fixture, measuring, trigger pull

7274758 4933-00-647-3696 USMC M14 DMR


bolt assembly and disassembly tool

7144859 4933-00-714-4859 M1 tool adapted to the M14

bolt assembly and disassembly tool

7791607 4933-00-055-5996 M1 and M14 variants, organizational and intermediate level item for the USMC M14 DMR

small arms shop set

4933-00-754-0664 reference SM 9-4-4933-A13

small arms repairman’s tool kit

5180-754-0640 pre-’62 tool kit

small arms repairman’s tool kit

5180-00-357-7770 twenty-seven items added to 5180-754-0640, reference SM 9-4-5180-A57

35

LEE EMERSON

tool set, direct and general support maintenance, basic small arms

8426358 1015-00-775-0366 reference SM 9-4-4933-E04

tool set, depot maintenance

8432422 4933-930-5598 7.62 MM Rifle, M14 Series

head space gage 7274780 5220-00-916-9271 1.6355 "

head space gage 7274782 5220-00-916-9275 1.6375 "

head space gage 7274786 5220-00-069-8676 1.6415 "

head space reamer assembly

24-013863 4933-809-7980

head space reamer assembly crank handle

10-013069 4933-105-2835

barrel and receiver assembly disassembling fixture

10-013027 4933-439-6089

bolt and roller assembly grease fitting adapter

10-013635 4933-00-450-6725

bolt and roller assembly assembling and disassembling fixture

10-016057 4933-00-439-6088

firing mechanism assembling fixture

443448 4933-00-439-6090

gas cylinder piston hole plug gage

8440826 5220-00-437-1152 NO-GO, 0.5009 " piston hole diameter

gas port alignment plug gage

11015316 5220-00-916-9188

bore straightness drop plug gage

11015416 5220-00-916-9189

targeting jack gage 6511841 4993-00-916-9193

GO relationship of storage holes to butt plate plug gage

7271641 5220-00-916-9194

36


torque testing gage 7271792 5220-00-916-9196

receiver and trigger housing clamping surfaces flush pin gage

7799742 5220-00-916-9341

operating rod spring length gage

7799743 5220-00-916-9360

extractor assembly length gage

7799744 6695-00-916-9362

ejector assembly length gage

7799745 5220-00-916-9365

hammer spring length gage

7799747 5220-00-916-9444

rear sight aperture length gage

7799746 5220-00-916-9437

connector assembly straightness gage

7799748 5220-00-916-9464

barrel alignment gage

7799749 6695-00-916-9468

selector slot loca-tion gage

7799750 5220-00-916-9487

firing pin intrusion flush pin gage

7799751 5220-00-916-9527

adjustment snap gage

7479462 5220-00-917-1068 MIL-STD-118

barrel and receiver assembling fixture

7799718 4933-00-937-4068

fixed open end wrench

10-012952 5120-00-156-8735

facing cutter 7799721 5110-00-937-4069

bolt face firing pin hole plain cylindrical plug gage

7458398 5220-00-745-8398 NO-GO, 0.083 " maximum diameter, MIL-STD-111

chamfer tool (field) 7799719 5220-00-937-4536 also known as a profile gage

37

LEE EMERSON

proof firing cover 7273975 4933-838-5472 for depot rebuild program only

firing stand 7273901 4933-00-916-9207 for depot rebuild program only

target, 1000 inch 8448435 6920-240-9349 roll of 500

target, M14 rifle 11686842 6920-021-2477 for depot rebuild program only, roll of 500 targets per box

adjustable base assembly

7692125 support level not available

timer cycle gage 7273920 support level not available

trigger pull gage 7274758 4933-00-647-3696 support level not available

bolt lock pin removal tool

improvised see drawing at TM 9-1005-223-35 July 1968 page 6

flash suppressor seating tool

improvised see drawing at TM 9-1005-223-35 July 1968 page 7

stock liner screw wrench

improvised

M15 grenade launcher sight drill jig

improvised see drawing at TM 9-1005-223-35 July 1968 page 7, use mild steel or aluminum

firing mechanism assembly and disassembly fixture

improvised

38


Table 18: M1 Garand Rifle Substitutions - Interchangeable Items

Description FSN or NSN Identical to the M14 item?

Comments

M1 elevation pinion assembly

not suitable early style with small screw and smooth face marked battle range

M1 elevation pinion assembly

1005-731-2738 no but suitable calibrated in yards

M1 windage knob not suitable early style with winged lock nut

M1 windage knob 1005-731-2737 yes

M1 rear sight aperture

1005-600-8868 yes

M1 rear sight cover 1005-600-8872 yes

M1 rear sight base 1005-564-6001 yes

M1 extractor 1005-554-6003 no but suitable early M14 extractor

M1 extractor spring w/plunger

1005-600-8618 yes

M1 trigger pin 5315-501-3669 no but suitable early M14 trigger pin

M1 trigger pin 1005-819-4501 yes on 1964 DCM list

M1 trigger and sear assembly

1005-554-6026 no but suitable for semi-automatic fire only

M1 sear no but suitable for semi-automatic fire only

M1 sear pin yes

M1 trigger yes

M1 hammer spring housing

1005-600-8883 yes

M1 hammer spring 1005-600-8887 yes

M1 hammer spring plunger

1005-600-8880 yes

M1 hammer pin 5315-501-3668 yes

39

LEE EMERSON

M1 hammer dimensionally identical

World War II production marked C46008

M1 hammer 1005-554-6008 dimensionally identical

1950s production marked D5546008

M1 safety 1005-554-6015 yes

M1 hand guard band

yes

M1 lower butt stock screw

5305-600-8881 yes

M1 butt stock sling swivel

1005-600-8889 yes

M1 small butt plate screw

1005-614-6873 early M14 and M14A1

also available from M1903, can be used on standard M14 stock by plugging hole


1005-556-4277 early M14 only can be used on standard M14 by using hinge transition piece 7790914 or equivalent

NM front sight marked NM 062

NM rear sight base 1005-875-6281 yes marked NM/2

NM rear sight base 1005-754-6799 yes marked NM/2A

NM windage knob 1005-649-9275 yes

hooded rear sight aperture

1005-864-2926 yes 0.0595 " diameter

hooded rear sight aperture

1005-864-2928 yes 0.0520 " diameter

NM rear sight aperture

1005-348-8654 yes 0.0595 " diameter, part number 7268109

NM rear sight aperture

1005-348-8655 yes 0.0520 " diameter, part number 7268110

M1907 leather sling 1005-00-714-1245 yes

40


small arms sling, cotton web

1005-654-4058 yes cotton web, olive drab, part number 6544058

small arms sling, hard nylon weave

1055-714-5320 no but suitable part number 7145320

small arms sling, soft nylon weave

1005-00-167-4336 no but suitable

small arms sling 1005-01-216-4510 no but suitable part number 12624561

M1 rifle cleaning rod case

1005-716-2792 no M1 case made of light cloth with integral tab, M14 case of heavy cloth with sewn on tab

M10 cleaning rod handle assembly

no part number 7266115

M10 cleaning rod section

yes drawing number D7162920

bore brush 1005-556-4174 yes drawing number C5564174

swab holder yes

barrel reflector 4933-726-5788 no

M15 grenade launcher sight drill jig

1005-00-731-0066 no part number 7310066, M1903 and M1 rifles, the jig holes are located too high for the M14

M1 stock ferrule sling swivel

1005-600-8890 M14A1 only

41

LEE EMERSON

Table 19: Accessories


bipod 98003A2200 1005-01-472-3902 M14 DMR, Harris Bipods

bipod Mk 14 Mod 0, Harris Bipods model 1A2-BRM

bipod adaptor plate Mk 14 Mod 0, Knights Armament

cartridge clip (stripper clip)

7790130 1305-00-914-7912 M14, M14A1, five round capacity

cartridge clip spring 7790131

cartridge clip shoe 7790132

chamber brush 7790463 1005-00-690-8441

cleaning kit 1005-01-451-5119 M14 DMR and Mk 14 Mod 0, Otis Products, Inc.

bore snake, .30 caliber

Mk 14 Mod 0, Hoppes

cleaning rod case with spacer

7267754 1005-00-650-4510 cloth case with sewn on tab

cleaning rod section

7266109 1005-00-726-6109 four required

cleaning rod swab holder

7266110 1005-00-726-6110 3.5 " overall length

Mk 14 EBR tool MSC Bondhus/MSC, 67255281

combination tool with cleaning rod

7790769 4933-00-768-0211

gas cylinder plug wrench

7267693 pre-’61 cleaning kit item, 3/8 " box end twelve point, 2 5/8 " overall length, 15 degree offset handle

combination tool pre-’61 cleaning kit item, three pieces

42


oiler case pre-’61 cleaning kit item

grease cup pre-’61 cleaning kit item

chamber brush 7267713 pre-’61 cleaning kit item, no ratchet mechanism

M1 cleaning kit case

7162792 1005-00-716-2792 lighter cloth material than 7267754 and has an integral tab

cleaning rod swab holder

6147417 1005-00-614-7417 pre-’61 cleaning kit item, 3 "

lubricant case 7790995 1005-00-791-3377 two compartment plastic case

magazine filler (late version)

7791154 1005-00-052-4336 commonly known as magazine charger guide

M3 bipod with carrying case

8445081 1005-00-8902609 M16 accessories

M3 bipod 8448457 1005-00-992-6676 M16 accessory, Colt Industries part number 62122

M3 bipod carrying case

2-2-246 3040-00-999-2430

M3 breech shield 7790929

M4 bandoleer 1305-00-079-3579 M14, M14A1

M5 winter trigger kit 5910520 1005-00-777-1369 M14

M5 winter trigger assembly

7790808 1005-00-775-0364 M14

M5 winter trigger cam

7791209

M5 winter trigger hinge

7791212

M5 winter trigger pin


M6 bayonet 7267616 1005-00-722-3097

43

LEE EMERSON

M6 bayonet with M10 scabbard

8427015 1005-00-014-0369

M6 bayonet blade assembly

7267649

M6 bayonet spring 7267645

M6 bayonet lever 7267648

M6 bayonet pin 586077 early version

M6 bayonet pin MS 16562-125 5315-00-058-6077 late version

M6 bayonet right side grip

7267652

M6 bayonet left side grip

7267653

M6 bayonet screw 7266548 5305-00-726-6548 two required, early version

M6 bayonet screw 11010078 5305-00-051-3609 two required, late version, effective with D7267616 Revision F

M8A1 scabbard 7268112 1095-00-508-0339

M10 scabbard 8448476 1095-00-223-7164

M11 small arms storage rack

8429990 1095-00-897-8755 M1 and M14 rifles

M12 blank firing kit 5910570 1005-00-893-0902

M12 blank firing attachment

7793000 third version

M14DC sound suppressor

1005-LL-L99-7965 (October 2006 NSN from the U. S. Navy

supplied by Smith Enterprise, Inc.

Mk 14 Mod 1 sound suppressor

U. S. Navy issue, supplied by Surefire, LLC

M15 grenade launcher sight

5750053 1005-00-344-6156

M15 sight body 7310096

M15 sight level assembly

7310097

44


M15 sight level assembly screw


M15 sight bracket screw


M15 sight stock plate

7311859

M15 sight tapping screw


M15 grenade launcher sight carry case

7160198 1005-00-716-0198 canvas pouch with two snap buttons

M76 grenade launcher

7267617 1005-00-722-3098 M14, MIL-STD-1266 dated March 23, 1961

M76 grenade launcher with equipment

5910536 1005-00-778-8812 M14

M151 vehicle mounting kit

2590-045-9611 (cancelled)

early version for M14 rifle

M151 vehicle mounting kit

11630529 095-00-763-7348 late version for M14 and M16 rifles

XM152 winter trigger assembly

11010283 1005-919-9915

muzzle stabilizer 7791661 1005-072-5382 second version

muzzle stabilizer 11686521 1005-00-930-0806 final version

muzzle stabilizer yoke pin

7791664 5315-00-929-0862

muzzle stabilizer yoke washer

7791668 5310-00-962-0873 0.098 " ID x 0.315 " OD x 0.060 " thick flat washer

muzzle stabilizer yoke assembly

11686520 1005-00-951-3232

muzzle stabilizer yoke screw

11686519 5306-00-956-3127 ¼ " diameter - 28 UNF x 1.215 " long hex head bolt

45

LEE EMERSON

muzzle stabilizer yoke nut

7791663 5310-00-953-6340 ¼ " diameter - 28 UNF x 0.270 " thick hex nut

muzzle stabilizer yoke

11686517

muzzle stabilizer stop

11686518 1005-00-951-3056

muzzle stabilizer 7791667

rifle carrier 8465-782-2799 nylon webbing carrier to attach a M14 rifle to an ALICE ruck sack, U. S. Army Quartermaster Corps item

M84 scope carrying case

7631596 1240-00-763-1596 marked MRT on the inside of the flap

ART scope carrying case

11729637 1240-179-4192 waterproof alloy aluminum or fiberglass container

AN/PAS-4 scope 5855-00-797-8217 Varo model 9903, 4.5 X, total weight 13 pounds

AN/PAS-4 scope 5855-00-990-0701 Polan Industries model P-155, 4.5X, total weight 13 pounds

AN/PVS-1 scope 5855-00-087-2942 4X magnification, 18.5 " long, 3.375 " wide, weight 6 pounds

AN/PVS-2 scope 5855-00-832-9223 4X magnification, 17.5 " long, 3.5 " wide, weight 6 pounds, AN/PVS-2A and AN/PVS-2B models were also fielded, -2B model features automatic control for light brightness

46


AN/PVS-2 carrying case

5855-00-832-6525

AN/PVS-3 scope 5855-00-832-9341 4X magnification, 13.5 " long, 3.5 " wide, 5.75 " high, weight 3 pounds, automatic light brightness control

AN/PVS-3A scope 5855-00-156-4992 4X magnification, automatic light brightness control

AN/PVS-4 scope 5855-00-629-5334 4X magnification, 9.5 " long, 4.5 " wide, 3.8 pounds weight

AN/PAQ-4 infrared aiming light

5855-01-107-5925 Mk 14 Mod 0

AN/PAQ-4A infrared aiming light

5855-01-312-5160 Mk 14 Mod 0

AN/PAQ-4B infrared aiming light

5855-01-361-1362 Mk 14 Mod 0

AN/PAQ-4C infrared aiming light

5855-01-398-4315 Mk 14 Mod 0

AN/PEQ-2A target illuminator

5855-01-447-8992 Mk 14 Mod 0

AN/PVS-10 day and night scope

5855-01-410-8979 M14 DMR

AN/PVS-14 night scope

5855-01-432-0524

AN/PVS-22 night scope

M14SE, Smith Enterprise, Inc. part number 2009

optical scope (sight, telescopic)

9349352 M21

optical scope 98003A0020 1240-01-470-6548 M14 DMR, 10X

scope ring (assembly, ring, telescopic sight)

98003A0030 1005-01-470-7458 M14 DMR

47

LEE EMERSON

scope ring screw (screw, cap)

MS 16995-18B 5305-00-145-0713 M14 DMR

scope ring upper half (cap, ring)

98003A0033 1005-01-470-9060 M14 DMR

scope ring lower half (ring, base)

98003A0031 1005-01-470-9065 M14 DMR

scope ring nut 98003A0036 5310-01-147-2385 M14 DMR

scope ring washer DOD-W-63474/3 5310-01-360-4766 M14 DMR

scope ring clamp 98003A0034 1005-01-470-9595 M14 DMR

scope mount 1240-01-316-0055 Atlantic Research Marketing Systems, Inc. # 18, MIL-STD-1913

scope mount 5855-01-506-5750 Smith Enterprise, Inc., part number 2006, MIL-STD-1913, 5.38 " long

scope mount 1005-01-533-8160 Smith Enterprise, Inc., part number 2008, MIL-STD-1913, 7.0 "

scope mount 1005-01-535-4430 Smith Enterprise, Inc., part number 2005, MIL-STD-1913, ACOG sight compatible

scope ring Mk 14 Mod 0, Badger Ordnance, two required

sling, rifle Mk 14 Mod 0, Buffer Technologies item TAS-M14

storage case Mk 14 Mod 0, Eagle Industries model DCM14

weapons record book

0000-00-005-9811 Mk 14 Mod 0

XM152 winter trigger kit

5910322 M14A1 only

48


Table 20: Repair Items


combination tool spring pin

MS 16562-98 5315-00-597-5086 1/16 " diameter x 3/8 " long

combination tool screwdriver blade

7790786 5120-00-780-1982 0.220 " wide x 0.527 " long

enamel, walnut stock touch up

8010-00-145-0042 number 21089, 1 gallon can

M5 winter trigger kit screw

7791231 two required, wood screw with partially threaded shaft

M5 winter trigger kit thread forming tapping screw

7791415 5305-00-990-6435 two required, wood screw with fully threaded shaft

M5 winter trigger kit retaining hinge washer

7791237 5340-00-010-5022

M5 winter trigger kit lever

7791211

M5 winter trigger kit safety

7790903 1005-00-778-0580

stock repair screw, large

5233523 5315-00-523-3523 half-hard brass, 3/32 " diameter x 2 7/16 " long, for repair of wood stock FSN 1005-754-6462

stock repair screw, small

7190954 5315-00-719-0954 half-hard brass, 1/16 " diameter x 2 " long, for repair of wood stock FSN 1005-754-6462

49

Documents

M14 Item Stock Numbers - imageseek.com Item Stock Numbers 070624.pdf · M14 ITEM STOCK NUMBERS 3 Table 1: Complete Rifles Description Part Number FSN or NSN Comments M14 Rifle 7267000