Upload
hoangdang
View
223
Download
0
Embed Size (px)
Citation preview
aG
EO+
Glycol/water mix/water reversible heat pump
1HEAT PUMPS - AIR CONDITIONING - REFRIGERATION - AIR HANDLING - HEAT EXCHANGE - NA 12.703 A
The geothermal energy solution that offers optimum
Comfort, Economy and Performance
Cooling capacity: 6 to 30kWHeating capacity: 6 to 36kW C
ER
TIFI
É PA
R CERTITA
POMPE À CHALEURCHAUFFAGE
(30/35°C 40/45°C)
60 HFCR410A
OPTION
Use
The AGEO+ glycol/water mix/water heat pump is designed for heating and cooling applications in new and existing individual homes.
The AGEO+ is compatible with low to medium temperature transmitters: underfloor heating/cooling systems, fan coil units, water cassettes, radiators, etc.
The AGEO+ can also be configured for ground water connection using an optional ITEX AGEO sectional heat exchanger (water-to-water operation).
The AGEO+ is installed indoors, ideally in a machine room, laundry room or garage protected from frost and adverse weather conditions. The unit is tested and adjusted in the factory. Delivered ready for operation.
With the SANI300L tank, the AGEO+ heat pump can produce domestic hot water for the home.
Range
The AGEO+ range consists of 10 single-phase and three-phase models from 6 to 36 kW in single-size casings. The unit includes several hydraulic components (see details in the COMPOSITION paragraph) to enable a wide range of installation configurations.
The range is NF heat pump certified by Certita under numbers NF 414-626 (water-to-water) and NF 414-627 (glycol/water mix/water).
ConfoRmity BT 2006/95/EC
NF C15-100
EMC 2004/108/EC
PED 97/23/EC
Category 1 (models 20-80)
Category 2 (models 100-120)
WEEE 2002/96/EC
RoHS 2002/95/EC
MADE IN FRANCE
HEAT PUMPS - AIR CONDITIONING - REFRIGERATION - AIR HANDLING - HEAT EXCHANGE - NA 12.703 A
aGEO+
2
Glycol/water mix/water reversible heat pump
Components
Compressor – R410A-Hermetic on/off SCROLL on anti-vibration mounts
-Built-in electric motor cooled by suction gas
-Internal motor protection
-Noise insulation
-Support seat on anti-vibration mounts
Brazed plate heat exchangers-AISI 316 stainless steel intermediate and end plates
- High-performance, optimised plate patterns
- Thermal insulation
Standard refrigerating components-Reversing valve
-Biflow expansion valve
Safety and information components-High pressure switch with automatic reset
-Frost protection sensors on the exchangers
-Water supply and return sensors on secondary exchanger
-Water supply sensor on primary exchanger
-Primary and secondary freon sensors
-Outdoor air sensor
-Exchanger water outlet temperatures and "operating mode" LED display on front panel
Built in double hydraulic module (primary and secondary)-Energy class A variable speed accelerator pump (sizes 20-30-40)
-3-speed accelerator pump (models 50-65-80-100-120)
-8L or 12L expansion vessel depending on the model
-Differential water pressure switch
-Drain valve
Electrical panel-Housing meets safety standards EN60335-1 and EN60335-2-40
-Earth connection
-Compressor motor contactor
-Remote control circuit protection
-Starting current limiter as standard (excluding 20H and 40HT)
µConnect regulation-Remote control terminal (unpolarised connection)
-Display of setpoint or room temperature
-Operating settings check
-Room temperature compensation
-Water law configuration
-On/off input control
-Back up operation configuration, alternating operation
-Auxiliary management
Options (for installation on site)-Charging kit
-Flexible connectors kit
-Screen filter kit
-Pressure release valve and pressure gauge kit
-Auxiliary heater
-See catalogue
sChematiC diagRam of RefRigeRation CiRCUit and hydRaUliC modUle
Sensors B1 Outdoor air sensorB2 Water return sensorB3 Water outlet sensorB8 Indoor exchanger freon sensorB6 Water outlet sensorB4 Outdoor exchanger freon sensor
¬ Differential pressure switch
Drain valve
® Frost protection sensor
¯ Control sensor
° Schräder valve
± Expansion bulb
² Accelerator pump
³ Expansion vessel
´ Fuse plug
55
5
6
3 3
7
8
B4
B8
HP
B6
82
4B2
4 B37
2
B1
41 1
FSE FSE
Outdoor circuit Indoor circuit
aG
EO+
Glycol/water mix/water reversible heat pump
3HEAT PUMPS - AIR CONDITIONING - REFRIGERATION - AIR HANDLING - HEAT EXCHANGE - NA 12.703 A
AGEO+ 20H 30H 40H 50H 40HT 50HT 65HT 80HT 100HT 120HT
Heating capacity to 10/7°C 30/35°C
kW7.39 9.43 11.5 15.31 11.3 16.06 19.83 24.46 30.9 36.34
Power input kW 1.45 1.88 2.29 3.04 2.17 3.21 3.88 4.71 5.7 7.06
COP* 5.1 5.02 5.02 5.04 5.21 5 5.11 5.19 5.42 5.15
Heating capacity to 10/7°C 40/45°C
kW7 8.93 10.89 14.49 10.7 15.2 18.77 23.15 29.25 34.4
Power input kW 1.74 2.35 2.87 3.79 2.72 4.01 4.85 5.89 7.12 8.82
COP* 4.02 3.8 3.8 3.82 3.94 3.79 3.87 3.93 4.11 3.9
Heating capacity to 0/-3°C 30/35°C
kW5.36 6.93 8.45 11.25 8.3 11.8 14.57 17.97 23.14 26.7
Power input kW 1.42 1.78 2.18 2.89 2.06 3.06 3.69 4.48 5.74 6.71
COP** 3.77 3.89 3.88 3.89 4.02 3.86 3.95 4.01 4.03 3.98
Heating capacity to 0/-3°C 40/45°C
kW5.1 6.56 8 10.65 7.86 11.17 13.79 17.01 22.26 25.27
Power input kW 1.76 2.23 2.72 3.61 2.58 3.81 4.61 5.6 7.11 8.4
COP** 2.9 2.94 2.94 2.95 3.05 2.93 2.99 3.04 3.13 3.01
Electrical supply 230V - 1ph - 50Hz + E + N 400V - 3ph - 50Hz + E + N
Sound power *** dB(A) 53 54 57 54 57 58 59 61 63
QUiCk seleCtion
* COP NFPAC certified under no. NF 414-627** COP NFPAC certified under no. NF 414-626*** NFPAC-certified sound power
WateR floW RateIMPORTANT:
The minimum flow rates must be observed. Failure to do so may result in destruction of the exchanger due to freezing. CIAT shall not be held liable for damage from frost caused by flow rates below the minimum rates specified below.
The nominal flow rates are used to size the hydraulic system.
(1) Heating mode with underground loop, indoor supply at 35°C, outdoor 0°C/-3°C(2) Heating mode with ground water, indoor 40°C/45°C, outdoor 10°C/6°C
hydRaUliC ConneCtionsMinimum system pipe diameter
Diameters calculated for a 15m hydraulic connection between the unit and the rest of the system.
AGEO+ 20H 30H 40H(T) 50H(T) 65HT 80HT 100HT 120HT
Outdoor heat
exchanger
Minimum flow rate (m3/h) 0,85 1,08 1,40 1,90 2,12 2,75 3,45 4,27Nominal flow rate, heating mode with underground loop (m3/h) (1)
0,94 1,35 1,57 2,35 2,54 3,20 4,20 5,30
Nominal flow rate, heating mode with ground water (m3/h) (2)
1,20 1,56 1,98 2,63 3,27 4,00 5,08 5,95
Indoor heat
exchanger
Min. flow rate (m3/h) 0,82 1,13 1,45 1,95 2,48 3,00 3,84 4,45
Nominal flow rate, heating mode (m3/h) 1,25 1,58 1,85 2,72 3,34 4,0 5,05 5,95
AGEO+Copper pipe hydraulic
connectionSteel pipe hydraulic connection PE pipe hydraulic connection
20H28 x 1
33/42 - DN32 - 1"1/432 x 2.9
30H
40H(T) 32 x 140 x 3.7
50H(T) 36 x 140/49 - DN40 - 1"1/2
65HT 38 x 150 x 4.6
80HT 42 x 1
50/60 - DN50 - 2"100HT54 x 1 63 x 5.8
120HT
HEAT PUMPS - AIR CONDITIONING - REFRIGERATION - AIR HANDLING - HEAT EXCHANGE - NA 12.703 A
aGEO+
4
Glycol/water mix/water reversible heat pump
available pRessURe in the pRimaRy CiRCUit (oUtdooR)
The available pressure curves are given for pure water. Subtract the following pressure values in the case of systems using monopropylene glycol: -7 kPA for 20% MPG-15 kPA for 40% MPG
0
20
40
60
80
100
120
1 1.5 2 2.5 3Qv water (m3/h)A
vaila
ble
stat
ic p
ress
ure
(kP
a)
Ageo+ - 40H(T)
1,8 2,52 3 3,5 40
10
20
30
40
50
60
70
PV
GV MV
Qv water (m3/h)
Ava
ilabl
e st
atic
pre
ssur
e (k
Pa)
Ageo+ - 50H(T)
2,4 6,43 4 5 610203040506070 80 90
100
PV GV
MV
Qv water (m3/h)
Ava
ilabl
e st
atic
pre
ssur
e (k
Pa)
Ageo+ - 65HT
3 3,5 4,54 5,55 60
10203040506070 80 90
PV
GV
MV
Qv water (m3/h)
Ava
ilabl
e st
atic
pre
ssur
e (k
Pa)
Ageo+ - 80HT
3,8 5 6 7 80
10
2030
40
50
60
70
80
PV
GV MV
Qv water (m3/h)
Ava
ilabl
e st
atic
pre
ssur
e (k
Pa)
Ageo+ - 100HT
4,4 5 6 7 80
10
2030
40
50
60
70
80
PV GV MV
Qv water (m3/h)
Ava
ilabl
e st
atic
pre
ssur
e (k
Pa)
Ageo+ - 120HT
0
10
20
30
40
50
60
70
0 0.5 1 1.5 2 2.5 Qv water (m3/h)
Ava
ilabl
e st
atic
pre
ssur
e (k
Pa)
Ageo+ - 20H/30H
aG
EO+
Glycol/water mix/water reversible heat pump
5HEAT PUMPS - AIR CONDITIONING - REFRIGERATION - AIR HANDLING - HEAT EXCHANGE - NA 12.703 A
available pRessURe in the seCondaRy CiRCUit (indooR)
Important: the indoor accelerator pump cannot be used at low speed
The available pressure curves are given for pure water. Subtract 5 kPa from the available pressures in the case of systems using 40% monopropylene glycol.
0
10
20
30
40
50
60
70
0 0.5 1 1.5 2 2.5
Ageo+ 20H/30H/40H(T)
Ava
ilabl
e st
atic
pre
ssur
e (k
Pa)
1,8 2,52 3 3,5 40
10
20
30
40
50
60
70
VP
VGMV
Ageo+ 50H(T)
Ava
ilabl
e st
atic
pre
ssur
e (k
Pa)
Qv water (m3/h)
2,4 3 3,5 4,540
10
20
30
40
50
60
70
PV
GV
MV
Ageo+ 65HT
Ava
ilabl
e st
atic
pre
ssur
e (k
Pa)
Qv water (m3/h)
3 3,5 4,54 5,55 60
10
20
30
40
50
60
70
PV GV MV
Ageo+ 80HT
Ava
ilabl
e st
atic
pre
ssur
e (k
Pa)
Qv water (m3/h)
3,8 5 6 7 80
10
2030
40
50
60
70
80
PV
GV MV
Ageo+ 100HT
Ava
ilabl
e st
atic
pre
ssur
e (k
Pa)
Qv water (m3/h)4,4 5 6 7 8
0
10
2030
40
50
60
70
80
PV GV MV
Ageo+ 120HT
Ava
ilabl
e st
atic
pre
ssur
e (k
Pa)
Qv water (m3/h)
HEAT PUMPS - AIR CONDITIONING - REFRIGERATION - AIR HANDLING - HEAT EXCHANGE - NA 12.703 A
aGEO+
6
Glycol/water mix/water reversible heat pump
Cooling and heating CapaCities
Cc: acceptable cooling capacity according to operating limits.Pi: compressor absorbed power.Hc: acceptable heating capacity according to operating limits.
Glycol/water mix required.
AGEO+Cold water
outlet temp. (°C)
Hot water outlet temp. (°C)
underfloor heating system Fan coil units radiator
30 35 40 45 50 55 60
Cc kw
pi kw
Hc kw
Cc kw
pi kw
Hc kw
Cc kw
pi kw
Hc kw
Cc kw
pi kw
Hc kw
Cc kw
pi kw
Hc kw
Cc kw
pi kw
Hc kw
Cc kw
pi kw
Hc kw
20H
40% mpG
solution
-6 4,0 1,2 5,1 3,7 1,3 5,0 3,4 1,5 4,9 3,1 1,7 4,7 2,7 2,0 4,7-4 4,2 1,2 5,4 3,9 1,3 5,3 3,6 1,5 5,1 3,3 1,7 5,0 2,9 2,0 4,9-2 4,5 1,2 5,7 4,2 1,3 5,5 3,9 1,5 5,4 3,5 1,7 5,2 3,2 2,0 5,20 4,8 1,2 6,0 4,5 1,4 5,8 4,1 1,6 5,7 3,8 1,7 5,5 3,4 2,1 5,5 3,1 2,3 5,42 5,1 1,2 6,3 4,8 1,4 6,2 4,4 1,6 6,0 4,1 1,8 5,8 3,7 2,1 5,8 3,4 2,3 5,7
municipal water
5 5,9 1,3 7,2 5,5 1,4 6,9 5,2 1,6 6,8 4,8 1,8 6,6 4,4 2,2 6,5 4,1 2,4 6,5 3,6 2,7 6,26 6,1 1,3 7,4 5,7 1,4 7,1 5,3 1,7 7,0 4,9 1,8 6,8 4,5 2,2 6,7 4,2 2,4 6,6 3,7 2,7 6,47 6,3 1,3 7,6 5,9 1,4 7,4 5,5 1,7 7,2 5,1 1,8 7,0 4,7 2,2 6,9 4,4 2,4 6,8 3,9 2,7 6,68 6,5 1,3 7,8 6,1 1,5 7,5 5,7 1,7 7,4 5,3 1,8 7,1 4,9 2,2 7,1 4,5 2,4 7,0 4,0 2,7 6,8
10 6,9 1,3 8,2 6,5 1,5 7,9 6,1 1,7 7,8 5,6 1,9 7,5 5,2 2,2 7,4 4,9 2,5 7,4 4,3 2,8 7,112 7,3 1,3 8,6 6,9 1,5 8,4 6,5 1,7 8,2 6,0 1,9 7,9 5,6 2,3 7,9 5,2 2,5 7,8 4,7 2,8 7,515 8,0 1,4 9,3 7,5 1,5 9,1 7,1 1,8 8,9 6,6 1,9 8,6 6,2 2,3 8,5 5,8 2,6 8,4 5,3 2,9 8,118 8,7 1,4 10,1 8,3 1,5 9,8 7,8 1,8 9,6 7,3 2,0 9,3 6,8 2,4 9,2 6,5 2,6 9,1 5,9 2,9 8,820 9,2 1,4 10,7 8,8 1,6 10,3 8,3 1,8 10,1 7,8 2,0 9,8 7,3 2,4 9,7 7,0 2,6 9,6 6,3 3,0 9,3
30H
40% mpG
solution
-6 5,1 1,5 6,6 4,7 1,7 6,4 4,3 2,0 6,3 3,9 2,2 6,1 3,4 2,6 6,0-4 5,4 1,5 7,0 5,0 1,7 6,8 4,6 2,0 6,6 4,2 2,2 6,4 3,7 2,6 6,3-2 5,8 1,6 7,3 5,4 1,7 7,1 5,0 2,0 7,0 4,5 2,2 6,7 4,0 2,7 6,70 6,1 1,6 7,7 5,7 1,8 7,5 5,3 2,1 7,4 4,8 2,3 7,1 4,3 2,7 7,0 4,0 3,0 7,02 6,5 1,6 8,2 6,1 1,8 7,9 5,7 2,1 7,8 5,2 2,3 7,5 4,7 2,7 7,4 4,3 3,0 7,3
municipal water
5 7,6 1,7 9,2 7,1 1,9 8,9 6,6 2,1 8,8 6,1 2,4 8,5 5,6 2,8 8,4 5,2 3,1 8,3 4,5 3,5 8,06 7,8 1,7 9,5 7,3 1,9 9,2 6,8 2,2 9,0 6,3 2,4 8,7 5,8 2,8 8,6 5,4 3,1 8,5 4,7 3,5 8,27 8,0 1,7 9,7 7,6 1,9 9,4 7,1 2,2 9,2 6,5 2,4 8,9 6,0 2,9 8,9 5,6 3,2 8,8 4,9 3,5 8,58 8,3 1,7 10,0 7,8 1,9 9,7 7,3 2,2 9,5 6,8 2,4 9,2 6,2 2,9 9,1 5,8 3,2 9,0 5,1 3,6 8,7
10 8,8 1,7 10,5 8,3 1,9 10,2 7,8 2,2 10,0 7,2 2,5 9,7 6,6 2,9 9,6 6,2 3,2 9,5 5,5 3,6 9,212 9,3 1,7 11,1 8,8 2,0 10,8 8,3 2,3 10,5 7,7 2,5 10,2 7,1 3,0 10,1 6,7 3,3 10,0 6,0 3,7 9,715 10,2 1,8 12,0 9,7 2,0 11,7 9,1 2,3 11,4 8,5 2,5 11,0 7,9 3,0 10,9 7,5 3,4 10,8 6,7 3,8 10,518 11,2 1,8 13,0 10,6 2,0 12,6 10,0 2,3 12,4 9,4 2,6 11,9 8,8 3,1 11,8 8,3 3,4 11,7 7,5 3,8 11,320 11,9 1,8 13,7 11,2 2,1 13,3 10,7 2,4 13,0 10,0 2,6 12,6 9,4 3,1 12,5 8,9 3,5 12,4 8,1 3,9 11,9
40H
40% mpG
solution
-6 6,2 1,8 8,1 5,8 2,1 7,8 5,3 2,4 7,7 4,8 2,6 7,4 4,2 3,2 7,3-4 6,6 1,9 8,5 6,1 2,1 8,2 5,6 2,4 8,1 5,1 2,7 7,8 4,5 3,2 7,7-2 7,0 1,9 9,0 6,6 2,1 8,7 6,0 2,5 8,5 5,5 2,7 8,2 4,9 3,2 8,20 7,5 1,9 9,4 7,0 2,2 9,2 6,5 2,5 9,0 5,9 2,8 8,7 5,3 3,3 8,6 4,9 3,6 8,52 8,0 2,0 9,9 7,5 2,2 9,6 6,9 2,5 9,5 6,3 2,8 9,1 5,7 3,3 9,1 5,3 3,7 9,0
municipal water
5 9,2 2,0 11,2 8,6 2,3 10,9 8,1 2,6 10,7 7,4 2,9 10,3 6,8 3,4 10,2 6,3 3,8 10,1 5,5 4,3 9,86 9,5 2,0 11,5 8,9 2,3 11,2 8,3 2,6 11,0 7,7 2,9 10,6 7,0 3,5 10,5 6,6 3,8 10,4 5,8 4,3 10,17 9,8 2,0 11,9 9,2 2,3 11,5 8,6 2,7 11,3 8,0 2,9 10,9 7,3 3,5 10,8 6,8 3,9 10,7 6,0 4,3 10,38 10,1 2,1 12,2 9,5 2,3 11,8 8,9 2,7 11,6 8,2 2,9 11,2 7,6 3,5 11,1 7,1 3,9 11,0 6,3 4,3 10,6
10 10,7 2,1 12,8 10,1 2,3 12,4 9,5 2,7 12,2 8,8 3,0 11,8 8,1 3,6 11,7 7,6 3,9 11,6 6,8 4,4 11,212 11,4 2,1 13,5 10,7 2,4 13,1 10,1 2,8 12,9 9,4 3,0 12,4 8,7 3,6 12,3 8,2 4,0 12,2 7,3 4,5 11,815 12,5 2,2 14,6 11,8 2,4 14,2 11,1 2,8 13,9 10,4 3,1 13,5 9,6 3,7 13,3 9,1 4,1 13,2 8,2 4,6 12,818 13,7 2,2 15,9 12,9 2,5 15,4 12,2 2,9 15,1 11,4 3,1 14,6 10,7 3,8 14,4 10,1 4,2 14,3 9,2 4,6 13,820 14,5 2,2 16,7 13,7 2,5 16,2 13,0 2,9 15,9 12,2 3,2 15,4 11,4 3,8 15,2 10,8 4,2 15,1 9,8 4,7 14,6
40HT
40% mpG
solution
-6 6,2 1,8 7,9 5,7 2,0 7,7 5,3 2,3 7,5 4,8 2,5 7,3 4,2 3,0 7,2-4 6,6 1,8 8,3 6,1 2,0 8,1 5,6 2,3 7,9 5,1 2,5 7,7 4,6 3,0 7,6-2 7,0 1,8 8,8 6,5 2,0 8,5 6,0 2,3 8,4 5,5 2,6 8,1 4,9 3,1 8,00 7,4 1,8 9,3 6,9 2,0 9,0 6,4 2,4 8,8 5,9 2,6 8,5 5,3 3,1 8,4 4,9 3,4 8,42 7,9 1,9 9,8 7,4 2,1 9,5 6,9 2,4 9,3 6,3 2,7 9,0 5,7 3,2 8,9 5,3 3,5 8,8
municipal water
5 9,1 1,9 11,0 8,6 2,1 10,7 8,0 2,5 10,5 7,4 2,7 10,1 6,8 3,3 10,1 6,3 3,6 9,9 5,6 4,0 9,66 9,4 1,9 11,3 8,8 2,2 11,0 8,3 2,5 10,8 7,7 2,7 10,4 7,0 3,3 10,3 6,6 3,6 10,2 5,8 4,1 9,97 9,7 1,9 11,6 9,1 2,2 11,3 8,6 2,5 11,1 7,9 2,8 10,7 7,3 3,3 10,6 6,8 3,7 10,5 6,1 4,1 10,18 10,0 2,0 12,0 9,4 2,2 11,6 8,8 2,5 11,4 8,2 2,8 11,0 7,6 3,3 10,9 7,1 3,7 10,8 6,3 4,1 10,4
10 10,6 2,0 12,6 10,0 2,2 12,2 9,4 2,6 12,0 8,8 2,8 11,6 8,1 3,4 11,5 7,6 3,7 11,4 6,8 4,2 11,012 11,3 2,0 13,3 10,6 2,3 12,9 10,0 2,6 12,6 9,3 2,9 12,2 8,7 3,4 12,1 8,2 3,8 12,0 7,3 4,2 11,615 12,3 2,1 14,4 11,7 2,3 14,0 11,0 2,7 13,7 10,3 2,9 13,2 9,6 3,5 13,1 9,1 3,9 13,0 8,2 4,3 12,518 13,5 2,1 15,6 12,8 2,3 15,1 12,1 2,7 14,8 11,3 3,0 14,3 10,6 3,6 14,2 10,1 3,9 14,0 9,2 4,4 13,620 14,3 2,1 16,4 13,6 2,4 15,9 12,9 2,7 15,6 12,1 3,0 15,1 11,3 3,6 15,0 10,8 4,0 14,8 9,8 4,5 14,3
aG
EO+
Glycol/water mix/water reversible heat pump
7HEAT PUMPS - AIR CONDITIONING - REFRIGERATION - AIR HANDLING - HEAT EXCHANGE - NA 12.703 A
Cooling and heating CapaCities
Cc: acceptable cooling capacity according to operating limits.Pi: compressor absorbed power.
Hc: acceptable heating capacity according to operating limits. Glycol/water mix required.
AGEO+Cold water
outlet temp. (°C)
Hot water outlet temp. (°C)
underfloor heating system Fan coil units radiator
30 35 40 45 50 55 60
Cc kw
pi kw
Hc kw
Cc kw
pi kw
Hc kw
Cc kw
pi kw
Hc kw
Cc kw
pi kw
Hc kw
Cc kw
pi kw
Hc kw
Cc kw
pi kw
Hc kw
Cc kw
pi kw
Hc kw
50H
40% mpG
solution
-6 7,8 2,7 10,5 7,3 3,0 10,4 6,8 3,4 10,3 6,4 3,8 10,3 5,7 4,4 10,2-4 8,4 2,7 11,1 7,9 3,0 11,1 7,4 3,4 10,9 7,0 3,8 10,9 6,2 4,4 10,7-2 9,0 2,7 11,8 8,6 3,0 11,7 8,0 3,4 11,5 7,5 3,8 11,4 6,8 4,4 11,30 9,8 2,7 12,5 9,2 3,0 12,3 8,6 3,4 12,1 8,2 3,8 12,1 7,4 4,4 11,9 6,5 5,0 11,62 10,5 2,7 13,2 9,9 3,0 13,0 9,3 3,4 12,8 8,8 3,8 12,7 7,9 4,4 12,4 7,2 5,0 12,3
municipal water
5 12,0 2,7 14,9 11,4 3,0 14,5 10,7 3,4 14,2 10,1 3,8 14,0 9,3 4,4 13,7 8,4 5,0 13,5 7,5 5,6 13,26 12,4 2,7 15,2 11,8 3,0 14,9 11,1 3,4 14,6 10,6 3,8 14,5 9,6 4,4 14,1 8,7 5,0 13,7 7,7 5,6 13,47 12,9 2,7 15,7 12,2 3,0 15,3 11,5 3,4 14,9 10,7 3,9 14,7 10,0 4,4 14,5 9,0 5,0 14,1 8,1 5,6 13,78 13,2 2,7 16,0 12,7 3,0 15,8 11,8 3,4 15,3 11,2 3,9 15,2 10,3 4,4 14,8 9,4 4,9 14,4 8,5 5,4 13,9
10 14,2 2,7 17,0 13,4 3,1 16,6 12,7 3,4 16,2 11,9 3,9 15,9 11,1 4,4 15,6 10,1 4,9 15,1 9,2 5,4 14,612 15,1 2,7 17,9 14,3 3,1 17,5 13,5 3,4 17,0 12,8 3,9 16,7 11,8 4,4 16,3 10,9 4,9 15,8 9,9 5,4 15,415 16,8 2,7 19,6 15,7 3,1 18,9 14,8 3,5 18,4 14,1 3,9 18,1 13,1 4,4 17,6 12,1 4,9 17,1 11,2 5,4 16,718 18,3 2,8 21,2 17,4 3,1 20,6 16,3 3,5 19,9 15,5 4,0 19,6 14,5 4,4 18,9 13,3 4,9 18,3 12,2 5,4 17,720 19,4 2,8 22,3 18,3 3,2 21,6 17,2 3,6 20,9 16,4 4,0 20,5 15,4 4,4 19,9 14,2 4,9 19,1 12,9 5,4 18,4
50HT
40% mpG
solution
-6 8,1 2,8 11,0 7,6 3,3 10,9 7,1 3,7 10,8 6,6 4,1 10,7 5,8 4,7 10,5-4 8,8 2,8 11,7 8,3 3,3 11,6 7,7 3,7 11,4 7,2 4,1 11,3 6,3 4,7 11,1-2 9,4 2,8 12,4 8,9 3,3 12,3 8,3 3,7 12,1 7,7 4,1 11,9 6,9 4,7 11,70 10,2 2,8 13,1 9,6 3,3 12,9 9,0 3,7 12,7 8,4 4,1 12,5 7,6 4,7 12,4 6,7 5,3 12,12 11,0 2,8 13,9 10,4 3,3 13,7 9,7 3,7 13,4 9,1 4,1 13,2 8,1 4,7 12,9 7,3 5,3 12,7
municipal water
5 12,6 2,9 15,6 11,9 3,3 15,2 11,2 3,7 14,9 10,4 4,1 14,5 9,5 4,7 14,3 8,6 5,3 14,0 7,7 5,9 13,76 13,0 2,9 16,0 12,3 3,3 15,6 11,6 3,7 15,3 10,9 4,1 15,0 9,9 4,7 14,6 8,9 5,3 14,3 7,9 5,9 13,97 13,4 2,9 16,4 12,8 3,3 16,1 12,0 3,7 15,7 11,1 4,2 15,3 10,3 4,7 15,0 9,3 5,3 14,6 8,3 5,9 14,38 13,8 2,9 16,8 13,2 3,3 16,5 12,3 3,7 16,1 11,5 4,2 15,8 10,6 4,7 15,4 9,6 5,2 14,9 8,7 5,7 14,4
10 14,9 2,9 17,9 14,0 3,4 17,4 13,3 3,7 17,0 12,3 4,2 16,5 11,4 4,7 16,2 10,4 5,2 15,7 9,4 5,7 15,212 15,8 2,9 18,8 14,9 3,4 18,3 14,1 3,7 17,9 13,1 4,2 17,4 12,2 4,7 16,9 11,2 5,2 16,4 10,2 5,7 16,015 17,5 2,9 20,5 16,4 3,4 19,9 15,5 3,8 19,3 14,6 4,2 18,8 13,5 4,7 18,2 12,5 5,2 17,8 11,5 5,7 17,318 19,1 3,0 22,2 18,2 3,4 21,6 17,1 3,8 20,9 16,0 4,3 20,3 14,9 4,7 19,7 13,7 5,2 19,0 12,5 5,7 18,320 20,3 3,0 23,4 19,1 3,5 22,6 18,0 3,9 22,0 16,9 4,3 21,3 15,9 4,7 20,6 14,6 5,2 19,9 13,3 5,7 19,1
65HT
40% mpG
solution
-6 10,0 3,3 13,5 9,3 3,7 13,2 8,6 4,1 12,9 7,9 4,6 12,7 7,1 5,1 12,3-4 10,8 3,4 14,3 10,2 3,8 14,0 9,5 4,1 13,7 8,7 4,6 13,5 7,8 5,1 13,1-2 11,7 3,4 15,2 11,0 3,8 14,9 10,2 4,2 14,5 9,5 4,7 14,2 8,6 5,1 13,80 12,5 3,4 16,1 11,9 3,8 15,8 11,1 4,2 15,5 10,3 4,7 15,1 9,4 5,3 14,7 8,5 5,8 14,32 13,6 3,4 17,1 12,8 3,8 16,7 12,0 4,2 16,4 11,1 4,7 16,0 10,2 5,3 15,6 9,1 5,9 15,1
municipal water
5 15,9 3,4 19,3 14,8 3,9 18,8 13,9 4,3 18,3 12,9 4,8 17,8 11,9 5,3 17,3 11,0 5,8 16,8 10,0 6,3 16,46 16,3 3,5 19,8 15,3 3,9 19,2 14,4 4,3 18,8 13,4 4,8 18,3 12,4 5,3 17,8 11,3 5,8 17,2 10,3 6,3 16,67 16,7 3,5 20,3 15,9 3,9 19,8 15,0 4,3 19,3 13,9 4,8 18,8 12,9 5,3 18,3 11,7 5,9 17,7 10,5 6,5 17,18 17,3 3,5 20,9 16,4 3,9 20,4 15,5 4,3 19,8 14,4 4,8 19,2 13,4 5,3 18,8 12,2 5,9 18,2 11,0 6,5 17,6
10 18,6 3,5 22,1 17,6 3,9 21,6 16,6 4,3 21,0 15,5 4,8 20,4 14,4 5,3 19,7 13,2 5,9 19,2 12,0 6,5 18,612 19,8 3,5 23,4 18,8 3,9 22,7 17,7 4,4 22,1 16,6 4,8 21,5 15,3 5,4 20,8 14,1 5,9 20,1 13,0 6,4 19,415 21,8 3,6 25,4 20,7 4,0 24,7 19,5 4,4 24,0 18,2 4,9 23,2 17,0 5,4 22,4 15,7 6,0 21,8 14,4 6,6 21,118 24,1 3,6 27,7 22,8 4,0 26,9 21,5 4,4 26,0 20,2 4,9 25,1 18,8 5,4 24,3 17,3 6,0 23,4 15,8 6,6 22,520 25,4 3,6 29,1 24,1 4,0 28,1 22,9 4,4 27,3 21,3 4,9 26,3 19,8 5,5 25,4 18,5 6,0 24,6 17,1 6,5 23,7
80HT
40% mpG
solution
-6 12,3 4,0 16,5 11,5 4,6 16,2 10,7 5,1 15,9 9,9 5,6 15,6 8,9 6,3 15,3-4 13,3 4,1 17,6 12,5 4,6 17,2 11,7 5,1 16,9 10,7 5,7 16,5 9,8 6,3 16,2-2 14,5 4,1 18,7 13,7 4,6 18,4 12,8 5,1 18,0 11,8 5,7 17,6 10,8 6,3 17,20 15,6 4,1 19,9 14,6 4,7 19,4 13,7 5,2 19,0 12,8 5,7 18,6 11,7 6,3 18,2 10,6 7,0 17,82 16,9 4,1 21,2 15,9 4,7 20,7 14,9 5,2 20,2 13,8 5,8 19,7 12,7 6,4 19,2 11,5 7,1 18,7
municipal water
5 19,4 4,2 23,7 18,3 4,7 23,1 17,3 5,2 22,6 16,1 5,7 21,9 14,8 6,4 21,4 13,6 7,1 20,8 12,4 7,7 20,26 20,1 4,2 24,4 19,0 4,7 23,8 17,9 5,2 23,2 16,7 5,8 22,6 15,4 6,4 21,9 14,0 7,2 21,3 12,6 7,9 20,67 20,8 4,2 25,1 19,7 4,7 24,5 18,6 5,2 23,9 17,3 5,8 23,2 16,0 6,4 22,5 14,6 7,2 21,8 13,2 7,9 21,28 21,4 4,3 25,8 20,3 4,7 25,1 19,1 5,2 24,5 17,9 5,8 23,8 16,6 6,4 23,1 15,2 7,2 22,4 13,8 7,9 21,7
10 22,9 4,3 27,3 21,8 4,7 26,6 20,5 5,3 25,9 19,2 5,8 25,1 17,7 6,5 24,4 16,3 7,2 23,6 14,9 7,8 22,812 24,4 4,3 28,8 23,2 4,7 28,1 21,9 5,3 27,3 20,5 5,9 26,5 19,0 6,5 25,6 17,5 7,3 24,9 16,0 8,0 24,115 26,9 4,3 31,3 25,5 4,8 30,4 24,1 5,3 29,5 22,6 5,9 28,6 21,0 6,5 27,7 19,4 7,3 26,8 17,9 8,0 25,918 29,2 4,4 33,7 27,8 4,8 32,7 26,3 5,3 31,7 24,6 5,9 30,7 23,0 6,6 29,7 21,4 7,3 28,7 19,8 7,9 27,820 30,7 4,4 35,2 29,4 4,8 34,3 27,7 5,4 33,2 26,0 6,0 32,1 24,3 6,6 31,1 22,5 7,4 30,0 20,8 8,1 28,9
HEAT PUMPS - AIR CONDITIONING - REFRIGERATION - AIR HANDLING - HEAT EXCHANGE - NA 12.703 A
aGEO+
8
Glycol/water mix/water reversible heat pump
Cooling and heating CapaCities
5 cm
15 cm 30 cm mini
1 m
� � � �
dimensions and fRee spaCe (in mm)
1- Outdoor circuit inlet2- Outdoor circuit outlet3- Indoor circuit inlet4- Indoor circuit outlet
Min. necessary clearanceAdjustable feet
Ageo+ 20H 30H 40H(T) 50H(T) 65HT 80HT 100HT 120HTWeights in kg 134 146 150 160 165 169 190 202
Outlet diameter Male 1"G Male 1" 1/4G Male 1" 1/2G
AGEO+Cold water
outlet temp. (°C)
Hot water outlet temp. (°C)
underfloor heating system Fan coil units radiator
30 35 40 45 50 55 60
Cc kw
pi kw
Hc kw
Cc kw
pi kw
Hc kw
Cc kw
pi kw
Hc kw
Cc kw
pi kw
Hc kw
Cc kw
pi kw
Hc kw
Cc kw
pi kw
Hc kw
Cc kw
pi kw
Hc kw
100HT
40% mpG
solution
-6 15,3 4,9 20,6 14,4 5,5 20,3 13,5 6,1 19,9 12,5 6,8 19,6 11,1 7,7 19,1-4 16,7 4,9 21,9 15,7 5,5 21,6 14,8 6,1 21,3 13,6 6,8 20,8 12,3 7,7 20,4-2 18,1 5,0 23,4 17,2 5,5 23,0 16,1 6,1 22,5 15,0 6,8 22,1 13,7 7,6 21,70 19,5 5,0 24,9 18,6 5,5 24,5 17,5 6,1 24,0 16,3 6,8 23,5 14,9 7,7 22,9 13,4 8,6 22,32 21,2 5,0 26,5 20,0 5,6 25,9 18,8 6,2 25,3 17,6 6,9 24,9 16,2 7,7 24,3 14,7 8,6 23,7
municipal water
5 24,5 5,1 29,9 23,2 5,6 29,2 21,8 6,3 28,5 20,3 7,0 27,7 19,0 7,7 27,0 17,4 8,6 26,3 15,8 9,6 25,76 25,3 5,1 30,7 24,0 5,7 30,0 22,6 6,3 29,3 21,1 7,0 28,5 19,6 7,8 27,8 18,0 8,7 27,0 16,3 9,7 26,27 26,2 5,1 31,7 24,9 5,7 30,9 23,5 6,3 30,1 21,9 7,0 29,3 20,3 7,8 28,5 18,6 8,7 27,7 17,0 9,7 26,98 27,1 5,2 32,6 25,7 5,7 31,8 24,3 6,3 30,9 22,8 7,0 30,1 21,1 7,8 29,3 19,4 8,7 28,5 17,7 9,7 27,7
10 29,0 5,2 34,6 27,5 5,8 33,6 25,9 6,4 32,6 24,3 7,1 31,8 22,5 7,9 30,8 20,9 8,7 29,9 19,2 9,6 29,112 31,0 5,3 36,6 29,3 5,9 35,6 27,6 6,5 34,5 26,1 7,1 33,5 24,2 7,9 32,5 22,3 8,8 31,5 20,4 9,8 30,515 34,2 5,4 39,9 32,4 6,0 38,8 30,5 6,6 37,4 28,6 7,3 36,2 26,7 8,0 35,1 24,8 8,8 34,0 23,0 9,7 32,918 37,7 5,5 43,5 35,6 6,1 42,1 33,7 6,7 40,7 31,6 7,4 39,3 29,5 8,1 38,0 27,5 8,9 36,7 25,4 9,8 35,520 39,9 5,6 45,9 37,7 6,2 44,3 35,6 6,8 42,7 33,3 7,5 41,2 31,2 8,2 39,7 29,0 9,1 38,4 26,9 9,9 37,0
120HT
40% mpG
solution
-6 18,2 6,0 24,5 17,0 6,7 24,0 15,9 7,4 23,6 14,5 8,3 23,1 13,0 9,4 22,7-4 19,8 6,0 26,1 18,6 6,7 25,6 17,3 7,5 25,1 15,8 8,3 24,5 14,3 9,4 24,0-2 21,4 6,1 27,8 20,2 6,7 27,2 18,7 7,5 26,6 17,2 8,4 26,0 15,7 9,4 25,40 23,1 6,1 29,5 21,7 6,8 28,9 20,3 7,6 28,3 18,8 8,4 27,6 17,1 9,5 26,9 15,3 10,6 26,32 25,1 6,0 31,4 23,5 6,8 30,6 22,0 7,6 30,0 20,3 8,6 29,2 18,6 9,5 28,5 16,7 10,6 27,7
municipal water
5 28,6 6,3 35,2 27,1 7,1 34,4 25,4 7,9 33,5 23,7 8,7 32,6 21,6 9,8 31,6 19,5 10,9 30,6 17,4 12,0 29,66 29,7 6,3 36,2 28,1 7,1 35,4 26,4 7,9 34,5 24,4 8,8 33,5 22,5 9,8 32,5 20,4 10,9 31,5 18,3 12,0 30,57 30,6 6,4 37,2 29,1 7,1 36,3 27,3 7,9 35,4 25,3 8,8 34,4 23,4 9,8 33,4 21,2 10,9 32,3 19,0 12,0 31,28 31,7 6,4 38,3 30,1 7,2 37,4 28,3 7,9 36,4 26,2 8,8 35,3 24,2 9,9 34,3 22,1 10,9 33,2 19,9 11,9 32,1
10 33,8 6,4 40,5 32,2 7,2 39,6 30,2 8,0 38,4 28,2 8,8 37,2 26,0 9,9 36,0 23,8 10,9 34,9 21,5 11,9 33,712 36,1 6,5 42,9 34,3 7,3 41,8 32,4 8,0 40,6 30,2 8,9 39,3 28,0 9,9 38,0 25,6 10,9 36,7 23,3 11,9 35,515 39,7 6,6 46,5 37,8 7,4 45,3 35,7 8,1 44,0 33,4 8,9 42,6 30,9 10,0 41,1 28,5 11,0 39,7 26,1 12,0 38,318 43,7 6,7 50,7 41,7 7,4 49,3 39,6 8,1 47,9 37,0 9,0 46,2 34,4 10,0 44,5 31,7 11,0 42,9 28,9 12,0 41,220 46,3 6,9 53,3 44,1 7,5 51,8 41,8 8,2 50,2 39,3 9,0 48,5 36,5 10,0 46,7 33,9 11,0 45,1 31,3 12,0 43,6
aG
EO+
Glycol/water mix/water reversible heat pump
9HEAT PUMPS - AIR CONDITIONING - REFRIGERATION - AIR HANDLING - HEAT EXCHANGE - NA 12.703 A
teChniCal ChaRaCteRistiCs
eleCtRiCal ChaRaCteRistiCs
(1) Current corresponding to the maximum compressor operating current (for a condensation temperature of 60°C). (2) Cable with 2 or 3 charged PVC conductors for temperatures below 50°C and for a maximum length of 30m. Note: for other conditions, refer to current standards A 3G4 cable with PVC/V2K (high temperature) conductors may be used for the 50H model
soUnd levels Ageo+ 20H 30H 40H(T) 50H(T) 65HT 80HT 100HT 120HT
Sound pressure dB(A) 30 31 34 35 36 38 41
NFPAC-certified sound power dB(A) 53 54 57 58 59 61 63
Sound pressure level in HEATING mode at 5 metres, 1.5 metres from ground, in a free field, directivity 2.
Ageo+ 20H 30H 40H 50H 40HT 50HT 65HT 80HT 100HT 120HT
Compressor
Quantity 1
Type SCROLLCapacity control % 0 - 100Rotation speed rpm 2900R410A refrigerant fluid kg 0.85 1.1 1.05 1.45 1.05 1.45 1.55 1.85 2.95 2.95
Oil capacity (POE) L 0.7 0.7 1.2 1.95 1.2 1.95 1.66 1.77 3.25 3.25
Indoor heat exchanger
Number of circuits 1 / 1Type brazed platesWater content L 0.85 0.85 0.85 1.23 0.85 1.23 1.42 1.9 2.37 2.37
Indoor hydraulic module
Expansion vessel capacity L 8 12Expansion vessel precharge pressure
bar 1,5
Max. water capacity of the pure water/glycol/water mix system
L 250 / 176 376 / 265
Minimum water capacity of system L 40 40 52 66 52 66 83 102 127 148Number of accelerator pump speeds/Available pressure 30/35°C 10°C
kPa -/63 -/48 -/54 2 / 39 -/54 2 / 39 2 / 45 2 / 40 2 / 58 2 / 42
Outdoor heat exchanger
Number of circuits 1 / 1Type brazed platesWater content L 0.85 0.85 0.85 1.23 0.85 1.23 1.42 1.9 2.37 2.37
Outdoor hydraulic module
Expansion vessel capacity L 8 12Vessel precharge pressure bar 1,5Max. water capacity of the pure water/glycol/water mix system
L 214 321
Number of accelerator pump speeds/Available pressure 30/35°C 10°C
kPa -/52 -/39 -/92 3/38 -/92 3/38 3/57 3/58 3/44 3/19
Ageo+ 20H 30H 40H 50H 40HT 50HT 65HT 80HT 100HT 120HT
Electrical supply 230 V - 1-ph+N+Earth - 50 Hz 400V - 3ph - 50Hz + Neutral + Earth
Max. powerIndoor circuit pump W 50 190 50 190 210 410Outdoor circuit pump W 50 105 210 105 210 410
Current
Compressor (1) A 11.34 13.27 16.4 23.85 5.91 9.12 10.17 13.01 16.1 18.4
Indoor circuit pump (min./max) A 0.06/0.58 0.57/0.96 0.06/0.58 0.75/0.96 0.65/1 1.75/2.09
Outdoor circuit pump (min./max) A 0.06/0.58 0.06/1.2 0.65/1 0.06/1.2 0.65/1 1.75/2.09
Controls A 0.18Maximum unit current (In) A 12.68 14.61 18.36 25.99 7.87 11.26 13.44 16.28 20.46 23.1Compressor starting current A < 45 39 25 30 35 48 50
Zmax Ω NC 0.24 0.117 NC 0.207 0.14 0.112
Electrical cables 3G4 3G4 3G10 5G1.5 5G4 5G6
Thermostat, outdoor sensor connections, pool sensor, on/off inputs
mm² 0.2-1mm²
Summer/winter bypass valve connections, well pump contactor coil, kit control circuits
mm² 1.5mm²
Circuit breaker (not supplied) (curve C or D) Am 16 16 20 32 10 16 16 20 25 25
HEAT PUMPS - AIR CONDITIONING - REFRIGERATION - AIR HANDLING - HEAT EXCHANGE - NA 12.703 A
aGEO+
10
Glycol/water mix/water reversible heat pump
sChematiC installation diagRam
élec
trova
nne
Réseau d'eau extérieur(pompe avec surpresseurou eau de ville)
Echangeur intermédiaire
Soupape de sécurité 3bars
Soupape de sécurité 3bars
RECHAUFFEUR
Soupape de sécurité 3bars
(OPTION)
Vanne by passETE / HIVER
Disconnecteur+ manomètre
RemplissageModèles 80 - 120
uniquement
Nécessaire uniquement si le réchauffeur peut êtreisolé hydrauliquement
Terminalde commande
Liaison câblée
Flexible connections
Connection to an underfloor heating system
Itex Ageo*
A - Shut-off valves
B - Thermometer pockets
C - Control valves
Recommendations for making hydraulic connectionsA constant flow of water must be maintained in the exchangers.Flexible hydraulic connectors (supplied as an option) must be fitted between the heat pump exchangers and the hot and cold water pipes. Fasten the hot and cold water pipes to the walls with brackets lined with highly flexible rubber to prevent the transmission of vibrations.The system must be charged with a sufficient volume of water to avoid compressor short cycles. Install a buffer tank if the volume of water in the heating or cooling system is too low. See the minimum water capacities given in the technical specifications.
*CIAT declines all liability for clogging and malfunctions of the exchanger in the Ageo+ heat pump if this intermediate exchanger is not installed.
!
Control terminal
Floor
Check valve + pressure switch
Charging
Screen filter
Only required if the heater can be hydraulically isolated
HEATER(OPTION)
Buffer tank (option)
3 bar safety valve
Wired connection
Screen filter
3 bar safety valve
3 bar safety valve
Models 80 - 120 only
Intermediate exchanger
SUMMER/WINTER bypass valve
closed in the summer
WINTER Shut-off valves
Thermometer pockets
Control valves
Discharge
Place the screen filter upstream of the well pump if unfiltered water is used.Strainer valve
sole
noid
val
ve
Outside water system (pump with booster or municipal water)
Well or ground water
SUMMER
aG
EO+
Glycol/water mix/water reversible heat pump
11HEAT PUMPS - AIR CONDITIONING - REFRIGERATION - AIR HANDLING - HEAT EXCHANGE - NA 12.703 A
Soupape de sécurité 3bars
Soupape de sécurité 3bars
RECHAUFFEUR
Soupape de sécurité 3bars
(OPTION)
Disconnecteur+ manomètre
RemplissageTerminal
de commande
Liaison câblée
Modèles 80 - 120uniquement
Nécessaire uniquement si le réchauffeur peut être isolé hydrauliquement
MODULE HYDRAULIQUEPuissance maxi : 11 kW
MAJOR 2 MAJOR 2MAJOR LINE MAJOR LINE
sChematiC installation diagRam
Flexible sleeves
Connection to an underfloor heating system and fan coil unit
Note: the schematic diagrams herein are provided for information only. under no circumstances do they constitute actual installation diagrams.
Outdoor sensorRoom sensor
Floor
CONTROLLER
HYDRAULIC MODULEMax. power: 11 kW
3 bar safety valve
Only required if the heater can be hydraulically isolated
HEATER(OPTION)
Control terminal
Check valve + pressure switch
Charging
Screen filter
Screen filter
Wired connection
Buffer tank (option)
3 bar safety valve
Models 80 - 120 only
3 bar safety valve
Return circuit Supply circuit
Buried glycol / water loop
Geothermal sensor
Filler material
Shut-off valves
Thermometer pockets
Control valves
HEAT PUMPS - AIR CONDITIONING - REFRIGERATION - AIR HANDLING - HEAT EXCHANGE - NA 12.703 A
aGEO+
12
Glycol/water mix/water reversible heat pump
This document is not legally binding. As part of its policy for continual product improvement, CIAT reserves the right to make any technical modification it considers necessary without prior notice.
Registered address Avenue Jean Falconnier - B.P. 1401350 - Culoz - FranceTel.: +33 (0)4 79 42 42 42Fax: +33 (0)4 79 42 42 [email protected] - www.ciat.com
Compagnie Industrielle d’Applications Thermiques - S.A. with a registered capital of 26,728,480 € - R.C.S. Bourg-en-Bresse B 545 620 114
CIAT Service ResidentialTel.: 08 26 96 31 05 (0.15 €/min)
installation ReCommendationsLocationAGEO+ heat pumps are installed indoors, ideally in a machine room, laundry room or garage protected from frost and adverse weather conditions. If possible, avoid installing the unit near a bedroom.
Sufficient clearance should be left around the AGEO+ as indicated in the Dimensions and Free space paragraph, to allow the unit's various compartments to be accessed easily.
Electrical connectionsAll the information needed to wire the system is provided on the wiring diagram supplied with the unit. The diagram should be followed to the letter. Wiring must be carried out in accordance with accepted engineering practice and conform to the regulations in force.
A switch and circuit breaker must be installed on the consumer unit by the fitter.
NOTE: to protect the indoor circuit from freezing, leave it on to allow the water to continue flowing through the hydraulic system and the accelerator pumps to automatically protect them from seizure. Add glycol to the system if the unit is inactive for a prolonged period.
The AGEO+ does not protect the outdoor circuit from freezing.
Add glycol to horizontal loops and geothermal loops
Well/ground water heat pumps: lay the pipes in an area protected from freezing temperatures. If necessary, install pipe heaters.
Hydraulic connectionsHydraulic connections are to be made in accordance with good engineering practice.
Flexible connections must be placed on the AGEO+ inlets and outlets for hydraulic connection. The system's pipes must also be held clear of the wall using anti-vibration mounts in order to prevent the transmission of noise and vibrations;
As heat pump exchangers are sensitive to clogging, flush the lines thoroughly before connecting them to the unit.
Install a screen filter (∅ < 600 µm) on the primary and secondary circuits to protect the plate heat exchangers from clogging.
The following accessories are essential to any hydraulic system and must also be installed:
System drain connection at low point,
Air vents at pipe high points,
Safety valves (3 bar tare),
Make sure the water capacity of the system is sufficient (see technical characteristics),
Fit a buffer tank or expansion vessel if necessary,
Follow the direction of flow of water in the exchangers. A constant flow of water must be maintained in the indoor and outdoor exchangers.
When using the AGEO+ with ground water, a sectional exchanger (ITEX AGEO or similar) must be installed to protect the heat pump from:
fine suspended solids (risk of clogging) or aggressive water.
iron, manganese or chlorine (risk of corrosion or deposits)
The exchanger also limits the number of times the frost protection is turned on when your system is turned on in cold weather or after a prolonged period of non-use.
NOTE: CIAT declines all liability for clogging and malfunctions of the exchanger in the AGEO+ heat pump if this intermediate exchanger is not installed.
CommissioningFollow the instructions in the installation manual.
CIAT can commission the unit if an order is received under the Serenity or Serenity+ warranty.
MaintenanceFollow the instructions in the installation manual
Take out a maintenance contract.