-
LUSAS forOffshore, Oil andGas Applications
-
Typical applicationsLUSAS engineering analysis software has
theability to model a wide variety of offshore,oil and gas
applications including:
Offshore wind farm bases in steel or concrete
Concrete gravity bases for wind farm or oil rig supportand oil
storage uses
Reinforced concrete caissons for submersibledockyard gates and
oil and and wind industry uses
Cast nodes for steel jackets including lifting lugs andleg
connection nodes and stress and fatigue analysis ofwelds
LNG tanks in steel or concrete, and LNG loading arms.
2
-
Typical projects undertaken
Design and analysis of above-groundfull containment LNG storage
tanks
Analysis of dynamic response andinteraction effects on LNG
tankinstallations
Nonlinear analysis of seismic hold-down straps for a major LNG
storagetank installation
Dynamic response and structuralassessment of seabed manifold due
toaccidental pile/stinger impact
Detailed analysis of a ship structurefollowing serious storm
damage
Development and implementation ofsemi-automatic numerical
analysis toolfor stress analysis of offshore pipeflanges
Dynamic response analysis of marineplatforms under current
loading
Dynamic response and structuralassessment of seabed manifold due
toaccidental pile/stinger impact
Detailed stress analysis of cast steelnodes and lifting points
for offshorejackets and topsides, including ultimateload nonlinear
analysis
Contact interaction analysis of aMudline Support System
Thermal design optimisation for aship to shore LNG loading
armpumping system
Offshore boat mooring buoy
3
Detailed analysis of reinforced concrete Gravity BaseStructure
(GBS), including nonlinear SSI effects atseabed interface
Assistance with offshore turbine modelling
Detailed stress analysis of cast steel nodes andlifting points
for offshore jackets and topsides,including ultimate load nonlinear
analysis
Nonlinear contact interaction and ultimate loadanalysis of
polymer hubs
Caissons, South Korea
Elasto-Plastic contact analysis of offshore drill
stemconnector
... and more.
Client confidentiality prevents projects from being identified
fully.
-
In brief
Issue 1.
LUSAS engineering analysis software is available for all typesof
structural engineering analysis, design and assessment.
Whether your analysis requirements are simple or advanced,LUSAS
software can be configured with various levels andoptions to meet
your needs, all of which are fully integratedand easily
upgradeable. The configuration can also providefor extra copies of
the Modeller independent of the Solverand can be made available as
fixed or network (floating)licences over both LAN and WAN for
flexible access.
Find out moreClients worldwide are benefiting from the
commercialadvantage that LUSAS gives them and testimonials on
theiruse of the software speak for themselves. This
brochureprovides only a limited overview of the uses of using
LUSASfor offshore, oil and gas work, detailed information sheetson
key features, analysis capabilities and real-life uses of
thesoftware are also available.
For more details, or to informally discuss your
particularrequirements please contact LUSAS or your local
distributor
LLLLLUSAS, USAS, USAS, USAS, USAS, Forge House, 66 High Street,
Kingston upon Thames, Surrey, KT1 1HN, UKTel: +44 (0)20 8541 1999 |
Fax: +44 (0)20 8549 9399 | Email: [email protected] |
www.lusas.com
