Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
Lumière LeDThe next generation of landscape and architectural accent lighting
2
Lumière’s LeD TechnologyMoving forward to meet the demands of sustainable lighting designAs our world adapts to new challenges so must our technology. Lumière is moving forward to meet the demands of
the ever-changing economical and environmental climate by embracing LED in many of our products. Over the past
five years, Lumière has been developing a viable LED solution for existing and future architectural lighting applications.
LED is ready to meet the challenges of today's lighting designers and Lumière is ready to provide the solutions.
At the heart of our LED technology is our miniature MR16
style LED lamp module. These replacements for regular
low voltage MR16 bi-pin lamps provide 12W output in spot,
narrow, or flood distributions in a variety of white and color
options. As a fully interchangeable system, if a new beam
pattern is desired after installation, simply change out the
module as if it were a normal MR16. With advanced onboard
drive circuitry, all that is needed to take advantage of our
LED system is a low voltage power source. The same rules
that apply to 12V halogen lamps apply here as well. We have
also gone above and beyond the call of duty with regards to
testing. Our LED module has passed all of the typical U.L.,
reliability and IP testing, as well as HALT tests, which involve
a series of vibrations in combination with thermal cycling
over time in a temperature controlled environment. This
extra investment has produced one of the most durable and
performance-driven LED light modules on the market.
3
wall / sign
page 14-17
step
page 12-13
pathway
page 10-11
accent / flood
page 6-9
inground
page 4-5
Lumière’s LeD SolutionsBreathing renewable life into architectural landscape lighting
Lumière's products are known for their quality, durability, performance, and sleek design. Soon they will also be known
for their energy efficiency and environmental friendliness with our new LED product offerings. In this brochure you
will find a selection of our most popular outdoor lighting fixtures that have been LED 'enabled'. Solutions for inground,
accent, flood, pathway, step, wall, and sign lighting applications are available. As we stay at the forefront of this
emerging technology, Lumière will continue to bring LED solutions into our family of architectural lighting products.
44
L E D • i ng round
BOCA 696 - Adjustable• 6.25” diameter adjustable inground
• Cool-to-the-touch lens is safer for pedestrian traffic
• 12V MR16 Style LED Module
• +/- 22.5º tilt x 360º horizontal rotation
• Rated for use in combustible surfaces
• Integral or remote transformer
L U M I È R E L E D
L U M I È R E L E D
5
Superior in-ground uplighting in small diameter recessed fixtures
BOCA 696-LeD The Boca 696 is a 6.25" diameter specification grade,
+/-22.5 degree tilt, 360 degree rotation adjustable
12W LED well light with lockable aiming. Three color
temperatures and three beam spreads are available.
Contemporary professional design. Housing is made
from corrosion resistant stainless steel. Lens bezel and
mounting ring are precision machined from corrosion
resistant brass. Tempered glass lens. Stainless steel
hardware. Sealed with high temperature silicone
o-ring. Two, 1/2-14 NPSM hubs.
LED modules are included and are available in three
color temperatures (warm, neutral and cool) and
three distributions (spot, narrow and flood). Both
color temperature and distribution must be specified
when ordering. Due to the onboard thermal feedback
control circuitry, LED modules are non-dimmable.
Lenses, louvers and color or dichroic filters can be
combined - up to three at once - to create multiple
lighting effects.
UL and cUL listed, standard wet label. IP67 rated.
Manufactured to ISO 9001-2000 Quality Systems
Standard. IBEW union made. Approved by New
York City Department of Buildings, Bureau of Electrical
Control for use in NYC, NY.
Recessed housing is available to ship in advance of
complete fixture for rough-in purposes. Specify option
–LBB and order housing as a separate line item. Finish
must be specified on recessed housing as trim collar
is permanently attached and sealed to the housing at
the factory.
PROJECT NAME: TYPE:
CATALOG #:
Specifications and dimensions subject to change without notice.
ORDERINGFIXTURE696 = 6-1/4" dia. Boca Inground LED Adjustable 22.5° Tilt x 360° Rotation
SOURCE12WLEDS = 12W Warm LED Spot12NLEDS = 12W Neutral LED Spot12CLEDS = 12W Cool LED Spot12WLEDN = 12W Warm LED Narrow12NLEDN = 12W Neutral LED Narrow12CLEDN = 12W Cool LED Narrow12WLEDW = 12W Warm LED Wide12NLEDW = 12W Neutral LED Wide12CLEDW = 12W Cool LED Wide
Note: Warm = 3000KNeutral = 4750KCool = 7500KSpot = 7 degreesNarrow = 20 degreesWide = 25 degrees
VOLTAGE (Magnetic Transformers Only)12 = 12 Volt Remote Transformer Required (not included)120/12 = 120 Volts Primary / 12V Secondary (integral transformer)208/12 = 208 Volts Primary / 12V Secondary (integral transformer)230/12 = 230 Volts Primary / 12V Secondary (integral transformer)240/12 = 240 Volts Primary / 12V Secondary (integral transformer)277/12 = 277 Volts Primary / 12V Secondary (integral transformer)347/12 = 347 Volts Primary / 12V Secondary (integral transformer)
FINISHMetalNBR = BrassNBZ = BronzeNCP = CopperNSS = Stainless Steel
PaintedBK = BlackBZ = BronzeCS = City SilverVE = VerdeWT = White
L E D • i ng round
ø4-3/4"[122mm]
ø6-1/4"[159mm]
8-7/8"[225mm]
Boca 696-LEDw/ Integral Transformer
Boca 696-LEDfor Remote Transformer
ø4-3/4"[122mm]
5-1/4"[133mm]
6
L E D • accen t / f l ood
SANIBEL 301• Round aluminum sealed housing
• 12V MR16 Style LED Module
• Adjustable hood provides glare control
• Ground spike mounting for directional uplighting
• Side mounted swivel stem with 340º x 360º adjustment
L U M I È R E L E D
L U M I È R E L E D
7
ORDERINGFIXTURE301 = MR16 Sanibel Accent Fixture w/Adjustable Shroud and
Integral Transformer
SOURCE12WLEDS = 12W Warm LED Spot12NLEDS = 12W Neutral LED Spot12CLEDS = 12W Cool LED Spot12WLEDN = 12W Warm LED Narrow12NLEDN = 12W Neutral LED Narrow12CLEDN = 12W Cool LED Narrow12WLEDW = 12W Warm LED Wide12NLEDW = 12W Neutral LED Wide12CLEDW = 12W Cool LED Wide
Note: Warm = 3000KNeutral = 4750KCool = 7500KSpot = 7 degreesNarrow = 20 degreesWide = 25 degrees
VOLTAGE (Magnetic Transformers Only)120/12 = 120-12 Volts Integral Transformer277/12 = 120-12 Volts Integral Transformer
FINISHPaintedBK = BlackBZ = BronzeCS = City SilverVE = VerdeWT = White
PROJECT NAME: TYPE:
CATALOG #:
Specifications and dimensions subject to change without notice.
L E D • accen t / f l ood
Lumière’s Sanibel Series fixtures with LeD technology
SANIBEL 301 Sanibel 301 is an ultra-compact MR16 style fixture
with integral 12V step-down transformer, for use with
Lumière’s MR16 style LED modules. It features a fully
adjustable side swivel stem and built-in adjustable
shroud to control glare. Various lenses, louvers and
color or dichroic filters can be combined – up to three
at once – to create multiple lighting effects. Lumière’s
exclusive Siphon Protection System (S.P.S.) prevents
water from siphoning into the fixture through its own
lead wires.
The adjustable hood can extend up to 2" to control
glare in a variety of applications without hindering the
light output. This feature is useful when the fixture will
be installed in applications where direct eye contact
is a factor.
Up to 2”MAXExtension[26mm]
Integral Transformer
ø3”[76mm]
7-1/2”MIN[191mm]
9-1/2”MAX[241mm]
2 1/4”[57mm]
3-1/4”[83mm]
Sanibel 301Side Swivel Stem
8
CAMBRIA 203 | 213 | 230• 12V MR16 Style LED Module
• Variety of mounting accessories
• Ground spike mounting for directional uplighting
• Ring mount for suspended downlighting
L E D • accen t / f l ood
L U M I È R E L E D
L U M I È R E L E D
9
ORDERINGFIXTURE203 = Cambria adjustable accent fixture213 = Cambria hanging fixture230 = Cambria uplight fixture
CONSTRUCTION (203 only)__ = Standard Side Swivel Stem, 1/2” NPSCRS = Center Rear Swivel Stem, 1/2” NPSFM = Rear Flush Mount, 1/2” NPSFL = Flush Lens, Side Swivel Stem, 1/2” NPS
SOURCE12WLEDS = 12W Warm LED Spot12NLEDS = 12W Neutral LED Spot12CLEDS = 12W Cool LED Spot12WLEDN = 12W Warm LED Narrow12NLEDN = 12W Neutral LED Narrow12CLEDN = 12W Cool LED Narrow12WLEDW = 12W Warm LED Wide12NLEDW = 12W Neutral LED Wide12CLEDW = 12W Cool LED Wide
Note: Warm = 3000KNeutral = 4750KCool = 7500KSpot = 7 degreesNarrow = 20 degreesWide = 25 degrees
VOLTAGE (Magnetic Transformers Only)12 = 12 Volt Remote Transformer Required (not included)
FINISHPaintedBK = BlackBZ = BronzeCS = City SilverVE = VerdeWT = White
MetalNBR = BrassNBZ = BronzeNCP = CopperNSS = Stainless Steel
PROJECT NAME: TYPE:
CATALOG #:
Specifications and dimensions subject to change without notice.
L E D • accen t / f l ood
ø2-1/4”[57mm] 4-1/2”
[114mm]
1-3/4”[44mm]
Cambria 203Side Swivel Stem
ø2-1/4”[57mm]
4-1/2”[114mm]
11-1/4”[286mm]
ø2-1/4”[57mm]
5-3/8”[137mm]
1-7/8”[48mm]
Cambria 203-CRSCenter Rear Swivel
Cambria 230
ø2-1/4”[57mm] 4-1/2”
[114mm]
Cambria 203-FMFlush Mount
ø2-1/4”[57mm] 3-5/8”
[92mm]
1-3/4”[44mm]
Cambria 203-FLFlush Lens / Side Swivel Mount
Cambria 213
5-7/8"[149mm]
ø2-1/4"[57mm]
Lumière’s Cambria Series fixtures with LED technology
Lumière’s next generation offering in the LED field
builds upon the latest available device and driver
technology and is fully upgradable as the technology
continues to evolve.
CAMBRIA 203Available with fully adjustable side swivel stem (203-
LED, 203-FL), center rear swivel (203-CRS) or rear
flush mount (203-FM). Lenses, louvers and color or
dichroic filters can be combined - up to three at once
- to create multiple lighting effects. Lumière’s exclusive
Siphon Protection System (S.P.S.) prevents water from
siphoning into the fixture through its own lead wires.
CAMBRIA 213 Cambria 213 features a unique hanging design that
allows placement where standard mounting methods
are not possible. Various lenses, louvers and color or
dichroic filters can be combined - up to three at once
- to create multiple lighting effects.
CAMBRIA 230 Cambria 230 features an integral mounting spike for
easy installation of simple directional uplight. Various
lenses, louvers and color or dichroic filters can be
combined - up to three at once - to create multiple
lighting effects.
10
CAMBRIA 206• Stem mounted single adjustable fixture
• 12V MR16 Style LED Module
• Variety of mounting accessories
• Various mounting heights available
L E D • pathway
L U M I È R E L E D
L U M I È R E L E D
11
PROJECT NAME: TYPE:
CATALOG #:
Specifications and dimensions subject to change without notice.
L E D • pathway
Cambria 206-LED
13-3/8"[340mm]
ø2-1/4"[57mm]
4-5/8"[117mm]
Lumière’s Cambria Pathway fixtures with LED technology
CAMBRIA 206 Cambria 206 is an ultra-compact pathway fixture for
use with Lumière’s MR16 style LED modules. The
206 attaches to an extended length mounting stem
and delivers a full range of aiming from any mounting
position. Various lenses, louvers and color or dichroic
filters can be combined - up to three at once - to
create multiple lighting effects. Lumière’s exclusive
Siphon Protection System (S.P.S.) prevents water from
siphoning into the fixture through its own lead wires.
ORDERINGFIXTURE206 = Cambria adjustable pathway fixture – single head,
13-3/8” mounting stem
SOURCE12WLEDS = 12W Warm LED Spot12NLEDS = 12W Neutral LED Spot12CLEDS = 12W Cool LED Spot12WLEDN = 12W Warm LED Narrow12NLEDN = 12W Neutral LED Narrow12CLEDN = 12W Cool LED Narrow12WLEDW = 12W Warm LED Wide12NLEDW = 12W Neutral LED Wide12CLEDW = 12W Cool LED Wide
Note: Warm = 3000KNeutral = 4750KCool = 7500KSpot = 7 degreesNarrow = 20 degreesWide = 25 degrees
VOLTAGE (Magnetic Transformers Only)12 = 12 Volt Remote Transformer Required (not included)
FINISHPaintedBK = BlackBZ = BronzeCS = City SilverVE = VerdeWT = White
MetalNBR = BrassNBZ = BronzeNCP = CopperNSS = Stainless Steel
OPTIONS24 = 24" mounting stem in lieu of standard36 = 36" mounting stem in lieu of standard48 = 48" mounting stem in lieu of standardxx = any custom length up to 48"
12
L E D • s tep
Open Fascia Crossguard Fascia Eyelid Fascia Louvered Fascia
RIO 1235 - 5" fixture• Round or Square
• 120V 4W LED Module
• Less than 1" projection
• Four fascia styles
RIO 1237 - 7" fixture• Round or Square
• 120V 12W LED Module
• Less than 1" projection
• Four fascia styles
L U M I È R E L E D
L U M I È R E L E D
13
ORDERINGFIXTURE1235 = RIO 5", open fascia, clear diffused lens1235C = RIO 5", cross/guard fascia, clear diffused lens1235E = RIO 5", eyelid fascia, clear diffused lens1235L = RIO 5", louvered fascia, clear diffused lens
1237 = RIO 7", open fascia, clear diffused lens1237C = RIO 7", cross/guard fascia, clear diffused lens1237E = RIO 7", eyelid fascia, clear diffused lens1237L = RIO 7", louvered fascia, clear diffused lens
FASCIA SHAPERD = RoundSQ = Square
SOURCE4LED = 4W LED module (1235) 3300K White12LED = 12W LED module (1237) 3000K White
VOLTAGE120/12 = 120/12V electronic LED driver
FINISHPaintedBK = BlackBZ = BronzeCS = City SilverVE = VerdeWT = White
MetalNBR = BrassNBZ = BronzeNCP = CopperNSS = Stainless Steel
OPTIONSLBB = Black box and pour cover shipped in advance
(For black box and pour cover shipped in advance, select LBB option and order black box and pour cover sepa-rately from below)
1235-BB = Black box and pour cover for 1235 fixture1237-BB = Black box and pour cover for 1237 fixture
PROJECT NAME: TYPE:
CATALOG #:
Specifications and dimensions subject to change without notice.
L E D • s tep
Lumiere’s RIO Series fixtures with LeD technology
RIO 1235-LED Rio architectural step lights provide beauty,
performance and durability. The 1235 is a 5" form that
houses a 4W LED module. The 1235 projects less
than 1" from the finished wall with no visible fasteners.
Logical, modular design elements facilitate fast and
foolproof installation in all types of wall surfaces
including drywall, concrete pour or brick/masonry. The
1235 includes IP68 rated outdoor protection, but is
also suitable for indoor wall-mounted applications. All
models are ADA compliant.
RIO 1237-LED The 1237 has all of the features of the 1235 but in a 7"
form with a 12W LED module.
SquareLouvered
SquareEyelid
SquareCrossguard
SquareOpen
RoundLouvered
RoundEyelid
RoundCrossguard
RoundOpen
.85” (max)[22mm]
3-1/2"[90mm]
2-3/4"[70mm]
4-1/2"[114mm]
5-3/4" Round 1235[146mm]7-3/4" Round 1237[197mm]
ø4"[102mm]
5-3/4" Square1235[146mm]7-3/4" Square1237[197mm]
ø5-1/2"[140mm]
Ø1.97”(50mm)
1.88”(48mm)
2.00”(51mm)
0.85”(26mm)
1.6”(41mm)
0.54”(14mm)
0.85”(26mm)
1237 LED Board
1235 LED Board
14
L E D • wal l
WESTWOOD 904• Fixed single up or downlight or dual up and downlight wall fixtures
• 12V MR16 Style LED Module
• Coverplate for direct electrical box mounting
• Optional metal shroud and square backplate
L U M I È R E L E D
L U M I È R E L E D
15
ORDERINGFIXTURE904 = Westwood straight uplight or downlight fixture904-UD = Westwood straight up & down light904-SQ = Westwood straight uplight or downlight fixture
with square shroud904-SQ-UD = Westwood straight up & down light with
square shroud
SOURCE12WLEDS = 12W Warm LED Spot12NLEDS = 12W Neutral LED Spot12CLEDS = 12W Cool LED Spot12WLEDN = 12W Warm LED Narrow12NLEDN = 12W Neutral LED Narrow12CLEDN = 12W Cool LED Narrow12WLEDW = 12W Warm LED Wide12NLEDW = 12W Neutral LED Wide12CLEDW = 12W Cool LED Wide
Note: Warm = 3000KNeutral = 4750KCool = 7500KSpot = 7 degreesNarrow = 20 degreesWide = 25 degrees
VOLTAGE (Magnetic Transformers Only)12 = 12 Volt Remote Transformer Required (not included)
FINISHPaintedBK = BlackBZ = BronzeCS = City SilverVE = VerdeWT = White
MetalNBR = BrassNBZ = BronzeNCP = CopperNSS = Stainless Steel
OPTIONS
When specifying an up/down fixture and different color temperatures or beam angles are required within the same fixture, add a second source call out (12WLEDS). The first source call out specifies the up light LED and the second source call out specifies the down light. If no second source is specified, it is assumed that both sources are the same.
As an example 904-UD-12WLEDS-12WLEDW-12-BK would be an up/down 904 with the uplight being a warm spot and the downlight being a warm wide.
PROJECT NAME: TYPE:
CATALOG #:
Specifications and dimensions subject to change without notice.
L E D • wal l
Lumiere’s Westwood Wall Series fixtures with LED technology
WESTWOOD 904Westwood 904 is ultra-compact low voltage fixture
for use with Lumière’s MR16 style LED module. The
904 provides downlight or uplight by way of the
180° rotational fixture head. The 904-UD provides
fixed up and down light simultaneously. Both fixtures
mount directly to any wall surface or over a standard
4" J-box and require a remote 12V step-down
transformer (not included).
Lumiere’s new square shroud option is available
for both single and dual head fixtures. The square
shroud option comes standard with a square
backplate. The square shroud option must be
ordered at the same time as the fixture.
Westwood 904 w/ SQS
Westwood 904-UD
5-3/4"[146mm]
4-1/2"[114mm]
4-3/8"[111mm]
4-7/8"[124mm]
2-7/8"[73mm]
4-3/8"[111mm]
4-3/8"[111mm]
9-3/16"[233mm]
ø2-1/4"[57mm]
Westwood 904-UD w/ SQS
4-1/2"[114mm]
4-3/8"[111mm]
9-7/16"[240mm]
Westwood 904
5-5/8"[143mm]
4-3/8"[111mm]
4-3/8"[111mm]
4-5/8"[117mm]
ø2-1/4"[57mm]
2-7/8"[73mm]
16
L E D • s ign
CAMBRIA 920• 36" hook arm mounted sign light
• Custom arm lengths available
• 12V MR16 Style LED Module
• Center rear swivel
CAMBRIA 922• 14-3/8" straight arm mounted sign light
• Custom arm lengths available
• 12V MR16 Style LED Module
• Side mount swivel
CAMBRIA 922-CRS• 33-1/16" straight arm mounted sign light
• Custom arm lengths available
• 12V MR16 Style LED Module
• Center rear swivel
L U M I È R E L E D
L U M I È R E L E D
17
ORDERINGFIXTURE920 = Cambria Sign Light - 36" Hook Arm922 = Cambria Sign Light - 14-3/8" Arm w/ Side Swivel922-CRS = Cambria Sign Light - 33-1/16" Arm w/ Center Rear Swivel
SOURCE12WLEDS = 12W Warm LED Spot12NLEDS = 12W Neutral LED Spot12CLEDS = 12W Cool LED Spot12WLEDN = 12W Warm LED Narrow12NLEDN = 12W Neutral LED Narrow12CLEDN = 12W Cool LED Narrow12WLEDW = 12W Warm LED Wide12NLEDW = 12W Neutral LED Wide12CLEDW = 12W Cool LED Wide
Note: Warm = 3000KNeutral = 4750KCool = 7500KSpot = 7 degreesNarrow = 20 degreesWide = 25 degrees
VOLTAGE (Magnetic Transformers Only)12 = 12 Volt Remote Transformer Required (not included)
FINISHPaintedBK = BlackBZ = BronzeCS = City SilverVE = VerdeWT = White
OPTIONSfor 920HA24 = 24" Hook Arm in lieu of standard armHA30 = 30" Hook Arm in lieu of standard arm
for 922 / 922-CRSSA24 = 24" Straight Arm in lieu of standard armSA30 = 30" Straight Arm in lieu of standard armSA36 = 36" Straight Arm in lieu of standard arm
PROJECT NAME: TYPE:
CATALOG #:
Specifications and dimensions subject to change without notice.
L E D • s ign
Lumiere’s Cambria Series fixtures with LED technology
CAMBRIA 920Cambria 920 is an ultra-compact low voltage sign
lighting fixture for use with Lumière’s MR16 style
LED module. It attaches to a wall mounted 36" hook
arm and delivers 180° of vertical adjustment for easy
aiming. Optional 24" or 30" hook arms are available in
lieu of the standard 36" arm. Various lenses, louvers
and color or dichroic filters can be combined – up
to three at once – to create multiple lighting effects.
Lumière’s exclusive Siphon Protection System (S.P.S.)
prevents water from siphoning into the fixture through
its own lead wires.
CAMBRIA 922Cambria 922 is an ultra-compact low voltage sign
lighting fixture for use with Lumière’s MR16 style
LED module. The 922 shares all of the same specs
as the 920 except that it attaches to a wall mounted
straight arm and delivers full vertical adjustment for
easy aiming. Optional 24", 30" or 36" straight arms are
available in lieu of the standard arm.
Cambria 920-LED
Cambria 922-LED-CRS
Cambria 922-LED
ø2-1/4"[57mm]
4-5/8"[117mm]
33-1/16"[840mm]
4-1/4"[108mm]
7-7/16"[189mm]
4-1/4"[108mm]
ø2-1/4"[57mm]
36"[914mm]
5-3/4"[146mm] 5-3/8"
[137mm]
ø2-1/4"[57mm]
14-3/8"[365mm]
4-5/8"[117mm] 4-1/4"
[108mm]
18Photo by: Scott B Smith Photography
19
Lumiere LED Module
ø1-7/8”[48mm]
1-5/16”[33mm]15/16”
[24mm]
ORDERINGSOURCE12WLEDS ............. 12W Warm LED Spot12NLEDS .............. 12W Neutral LED Spot12CLEDS .............. 12W Cool LED Spot12WLEDN ............. 12W Warm LED Narrow12NLEDN .............. 12W Neutral LED Narrow12CLEDN .............. 12W Cool LED Narrow12WLEDW ............ 12W Warm LED Wide12NLEDW ............. 12W Neutral LED Wide12CLEDW ............. 12W Cool LED Wide
Note: Warm = 3000KNeutral = 4750KCool = 7500KSpot = 7 degreesNarrow = 20 degreesWide = 25 degrees
Seamlessly integrating nextgeneration sustainable technology Lumière’s next generation offering in the LED field
builds upon the latest available device and driver
technology and is fully upgradable as the technology
continues to evolve.
Specifically designed for low voltage systems,
Lumière’s LED module is compatible with most of
miniature cylinder type MR16 fixtures. The 12V LED
module enables the end user to selectively integrate
both halogen and LED devices on the same lighting
circuit (12V). As the LED fixtures can be installed in
the exact same way as any other low voltage system,
integration of LED technology into both new-build
and retrofit applications is simple and seamless.
This proprietary MR16 style LED module design also
incorporates a thermal feedback control circuit that
monitors on-board temperatures and modifies its own
operating parameters to optimize system performance
and maximize life.
PROJECT NAME: TYPE:
CATALOG #:
Specifications and dimensions subject to change without notice.
LeD mODuLe• 12 Watts
• On board driver
• Low voltage input
• 3 color temperatures (3000K, 4750K, & 7500K)
• 3 optics (7º, 20º, & 25º)
• Thermal feedback control
M R 1 6 L E D • modu le
Lumière4675 Holly StreetDenver, CO 80216
P: 303-393-1522F: 303-393-1477
Cooper Lighting, LLC.Customer First Center1121 Highway 74 SouthPeachtree City, GA 30269
P: 770-486-4800F: 770-486-4801
www.cooperlighting.com
Domestic FacilitiesCranbury, New JerseyElk Grove Village, IllinoisIrving, TexasOntario, CaliforniaPeachtree City, Georgia
Canadian FacilityCalgary, Alberta T2E 7V9Mississauga, Ontario L5R 1B8
International Sales, USACooper Lighting, LLC.1121 Highway 74 SouthPeachtree City, GA 30269
P: 770-486-4800F: 770-486-4801
CanadaCooper Lighting, LLC.5925 McLaughlin RoadMississauga, Ontario L5R 1B8
P: 905-507-4000F: 905-568-7049
The Cooper Lighting FamilyHaloMetaluxLumarkSure-LitesNeo-RayCorelitePortfolioIrisShaperioLumièreInvue McGraw-EdisonStreetworksFail-SafePDSMWSRSAAmetrix
Cooper Industries, Ltd.600 Travis, Ste. 5800Houston, TX 77002-1001P: 713-209-8400www.cooperindustries.com
Cooper Lighting and Lumière logos are valuable trademarks of Cooper Industries in the United States and other countries. You are not permitted to use the Cooper Trademarks without the prior written consent of Cooper Industries.
ADL100963 Printed in USA