Upload
ezze45
View
231
Download
5
Embed Size (px)
Citation preview
7/30/2019 LTE Site Acceptance_Site1.docx
1/18
NSN NPO/Ihab Amaireh / 2011
LTE Site Acceptance
Acceptance Site: SITE1Date: 09-10-2011
Table of Contents
1 Summary ____________________________________________________ 4
2 Acceptance Methodology ______________________________________ 5
7/30/2019 LTE Site Acceptance_Site1.docx
2/18
2
3 Drive Testing ________________________________________________ 6
4 Testing Details _______________________________________________ 7
5 Site Drive test result ___________________________________________ 9
5.1 Performance Results ___________________________________________ 95.2 Drive Test Results ____________________________________________ 115.2.1 RSRP Plots _________________________________________________ 11
5.2.2 PCI Plot ____________________________________________________ 135.2.3 RSRQ Plots _________________________________________________ 145.2.4 RSSI Plots__________________________________________________ 16
6 Acceptance _________________________________________________ 18
7/30/2019 LTE Site Acceptance_Site1.docx
3/18
3
7/30/2019 LTE Site Acceptance_Site1.docx
4/18
4
1 Summary
This document is to describe the concept of the site performance acceptance for the
integrated site to check the functionality and site ability.
The objective of this report is to evaluate the performance of the Flexi eNodeB in the LTE
environment with a set of defined Test Cases to be evaluated and achieved.
Prior to the commencement of field testing, there will be an initial period during which all
setups shall be validated. This includes a validation of proper functioning of the field
test elements such as the UEs, Drive Testing Tool and applications. In addition, the
network will be analyzed via measurements to ensure that any radio conditions that
Have been specified as essential for testing are actually being realized.
Following are the system and software versions used while performing the tests:
SW used: RL15, Altair UE 7210, 20 MHz bandwidth UE tracer XCAL/XCAP ,Agilent
Filezilla FTP client.
Performance will be evaluated as follows:
Drive Testing
Data Throughput Testing
Handover
Latency
7/30/2019 LTE Site Acceptance_Site1.docx
5/18
5
2 Acceptance Methodology
The Acceptance will be done using the following inputs:
1. Analysis of site performance drive test results as carried out by NSN.
2. Data Throughput Analysis testing FTP from test laptops using XCAL/Agilent.
Site Performance Drive Test results will be used as Final Site Acceptance Criteria.
The Site Performance Drive Test will be performed taking into consideration this site does
not have any alarms.
Proposed Solution
Proposed Solution
Frequency Band 40 (2.3 GHZ )
Carrier Bandwidth 20 MHz
Frame configuration 2
Special sub frame configuration 7
Maximum Tx power DL (Pout @ eNodeB) 20 Watts (10 Watts per antenna )
Downlink Modulation Scheme OFDMA (QPSK, 16QAM, 64QAM)
Uplink Modulation Scheme SC-FDMA (QPSK, 16QAM)
DL MIMO Configuration 2 x 2 MIMO 2 x 2 MIMO (transmission mode 3) => OL MIMO
2 x 2 MIMO (transmission mode 2) =>TxDiv
Test UE Mobility Stationary, Mobile (~3050 km/h)
7/30/2019 LTE Site Acceptance_Site1.docx
6/18
6
3 Drive Testing
Drive Testing (DT) will be used for the following purposes:
1. To check the RF coverage and quality.
2. To ensure functionality testing (intra-eNBHandovers, call drops, etc)
3. To confirm Call processing4. To measure Throughput in DL & UL directions from Application server.
5. To measure latency.
6. To check the RF Configuration of the Site
7/30/2019 LTE Site Acceptance_Site1.docx
7/18
7
4 Testing Details
1. Data Throughput
Data Throughput tests will be executed at
Static points under the site.
Coverage Throughput (doing the tests while driving around the sites moving from the
Best Radio Conditions till the Cell Edge )
The following call pattern and cycle will be used:
Attach
Log into the Application Server
FTP,TCP and UDP Download
FTP,TCP and UDP Uplink
Connection release (network detach)
For the Testing duration, For Static Points 1 min continuously is accepted .For Coverage
throughput it is recommended to upload multiple big size files (5-10 GB) before testing
In addition to the aforementioned testing, it is recommended to do 2 multiple sessions
2. Latency
Latency Tests done for
Control Plane (the time required when call setup request start to get the attach
complete )
User Plane (it is the round-trip time when pinging the application server to be tested
with different word size (32,1000 and 1500 Bytes )
7/30/2019 LTE Site Acceptance_Site1.docx
8/18
7/30/2019 LTE Site Acceptance_Site1.docx
9/18
9
5 Site Drive test result
5.1 Performance Results
Test Case AchievedRadio Condition(For
throughput test cases
FTP/TCP (throughput ) DL
testing
NA NA
Latency (32 Bytes )NA NA
Inter Cell Handover (traffic
Mode)NA NA
Coverage ( showing the SINR
and RSRP values) NA
NA
ISP connection Test (speed Net) NA NA
Browsing NA NA
Antenna Orientation check for
all cellsNA NA
Down tilt of the siteNA NA
7/30/2019 LTE Site Acceptance_Site1.docx
10/18
10
1) Speed Test ResultsNA
2) Ping ResultsNA
3) Handover: Intra cell HandoverNA
4) Speed Net & Browsing Net Per Second Logs
RSCP RSRQ SINR
dbm db db DL Avr. DL Max UL Avr. UL Max DL UL ping Download Upload Ping (ms) HO
A -77 -5 29 23.9 35.2 3.1 6.2 Server Down Server Down Server Down 20.33 6.1 26 Done
B -87 -10.5 20 25.7 39.1 4.1 7.2 Server Down Server Down Server Down 33.88 6.14 39 Done
C -89 -12.5 22 40.7 55.5 6.8 9.6 Server Down Server Down Server Down 30.7 6.81 26 Done
te NameSpeedTest (Mbps)NetPerSec (Mbps) FTP (Mbps)
TNJ015
7/30/2019 LTE Site Acceptance_Site1.docx
11/18
11
5.2 Drive Test Results
5.2.1 RSRP Plots
Sector A
Legend:-
Figure1: TNJ015 Sec A RSRP Plot
7/30/2019 LTE Site Acceptance_Site1.docx
12/18
12
Sector B
Legend:-
Figure2:TNJ015 Sec B RSRP Plot
7/30/2019 LTE Site Acceptance_Site1.docx
13/18
13
5.2.2 PCI Plot
Legend:-
Figure4:TNJ015 PCI Plot
7/30/2019 LTE Site Acceptance_Site1.docx
14/18
14
5.2.3 RSRQ Plots
Sector A
Legend:-
Figure 5: TNJ015 Sec A RSRQ Plot
7/30/2019 LTE Site Acceptance_Site1.docx
15/18
15
Sector B
Legend:-
Figure 6: TNJ015 Sec B RSRQ Plot
7/30/2019 LTE Site Acceptance_Site1.docx
16/18
16
5.2.4 RSSI Plots
Sector A
Legend:-
Figure 8:TNJ015 Sec A RSSI Plot
7/30/2019 LTE Site Acceptance_Site1.docx
17/18
17
Sector B
Legend:-
Figure 9: TNJ015 Sec B RSSI Plot
7/30/2019 LTE Site Acceptance_Site1.docx
18/18
18
6 Acceptance
Following the successful system testing, Test Cases reviews and DT reports, LTE Site
functionality is hereby accepted.
Operator representative:
_____________ _______________ _______________
Signature Name Date
Vendor representative:
_____________ _______________ _______________
Signature Name Date