3
LQS03 Readiness Review, Feb 21, 2012 Introduction – G. Ambrosio 1 Introduction Giorgio Ambrosio LQS03 Readiness Review LBNL February 21, 2012 BNL - FNAL - LBNL - SLAC

LQS03 Readiness Review, Feb 21, 2012Introduction – G. Ambrosio 11 Introduction Giorgio Ambrosio LQS03 Readiness Review LBNL February 21, 2012 BNL - FNAL

Embed Size (px)

Citation preview

Page 1: LQS03 Readiness Review, Feb 21, 2012Introduction – G. Ambrosio 11 Introduction Giorgio Ambrosio LQS03 Readiness Review LBNL February 21, 2012 BNL - FNAL

LQS03 Readiness Review, Feb 21, 2012 Introduction – G. Ambrosio 11

IntroductionGiorgio Ambrosio

LQS03 Readiness Review LBNL

February 21, 2012

BNL - FNAL - LBNL - SLAC

Page 2: LQS03 Readiness Review, Feb 21, 2012Introduction – G. Ambrosio 11 Introduction Giorgio Ambrosio LQS03 Readiness Review LBNL February 21, 2012 BNL - FNAL

LQS03 Readiness Review, Feb 21, 2012 Introduction – G. Ambrosio 22

Charge

Goals:

Evaluate the readiness of coils, structure, assembly and test plan for LQS03

 Committee:

G. Ambrosio, H. Felice, A. Ghosh.

 

Location:

LBNL video-meeting room

BNL and FNAL through video-mtg link IP#: 8852771 (back-up#: 8552771)

 

Date and Time:

February 21, 2012 from 8:30am to 2:30pm (Pacific Time)

 

Link to talks:

https://plone.uslarp.org/MagnetRD/longquad/meetings/fy12/lqs03rr/

Format:

Internal review; everybody is invited to ask questions and make comments.

Page 3: LQS03 Readiness Review, Feb 21, 2012Introduction – G. Ambrosio 11 Introduction Giorgio Ambrosio LQS03 Readiness Review LBNL February 21, 2012 BNL - FNAL

LQS03 Readiness Review, Feb 21, 2012 Introduction – G. Ambrosio 33

Agenda (Pacific time)

Introduction and chargeo Time: 8:30-8:40 (Giorgio Ambrosio)

Conductor: strands, cabling, insulation, and witness sampleso Time: 8:40-9:00 (Dan Dietderich)o Time: 9:00-9:20 (Arup Ghosh)o Time: 9:20-9:40 (Vito Lombardo)

Coffee break: 9:40-10:00 Coils: fabrication data and tests – Coils #15, #17, and #19.

o Time: 10:00-10:30 (Fred Nobrega) Coils: fabrication data and tests – Coils #16 and #18.

o Time: 10:30-11:00 (Jesse Schmalzle) Coils: All coils qualification tests and heater connections

o Time: 11:00-11:30 (Ray Hafalia, Maxim Martchevskii) Discussion of conductor and coils data

o Time: 11:30-12:00 Lunch: 12:00-1:30 Structure and assembly plans

o Time: 1:30-2:00pm (Helene Felice) Test preparation and test plan

o Time: 2:00-2:30pm (Guram Chlachidze)