Upload
jake-yates
View
68
Download
1
Tags:
Embed Size (px)
Citation preview
T h e H i g h - P e r f o r m a n c e L e a d e r I n B i o d e g r a d a b l e D r i l l i n g F l u i d A d d i t i v e s
ViChem LPR-50Oil-Based Mud Performance Enhancer
Cost Effective Performance Enhancer • BiodegradableViChem LPR-50ViChem LPR-50 is an ester-based additive that significantly improves rate of penetration (ROP), reduces pump pressures, and increases electrical stability for oil-based mud (OBM) operations, while providing a cost-effective solution for achieving higher lubricity. High-performance and low toxicity ratings make it ideally suited to drilling in environmentally sensitive areas.
Specially formulated for Emulsion-based mud systems (EBM), ViChem LPR-50 offers multiple advantages over other lubricants, including easy mixing, a stable viscosity index, improved rheology and filtration rates, and enhanced lubricity.
ViChem LPR-50 outperforms other additives in thermal, oxidative, and hydrolytic stability.
ViChem LPR-50 as 2-3% of total mix delivers significant advantages
Lowers friction coefficients by up to 40% Increases weight on the bit
Reduces torque by up to 50% Increases energy efficiency
Improves ROP up to 49% Lowers HTHP filtrate
Stabilizes and lowers rheology Eases casing runs
Reduces pump pressures Increases hole stability
Increases annular velocity Lowers mud maintenance costs
Improves electrical stability Reduces environmental impact
ViChem LPR-50 reduces coefficient of friction in field OBMViChem LPR-50 Properties
0.0
OIL BASE MUD
4 PPB GILSONITE
4 PPB GRAPHITE
3% A LUBE
3% B LUBE
3% VICHEM LPR-50
16.0
Lower CoF improves ROP, decreases torque and drag, and reduces wear and tear on rig components. ViChem LPR-50 is well suited to drilling high-angle and horizontal wells.
► Specific Gravity: 1.03 - 1.05► Appearance/Color: Dark brown viscous liquid,
pine odor► Temperature Stability: Up to 16 hrs @ 300˚ F ► Flash Point: 500˚ F / 260˚ C ► MSDS compliant
ViChem LPR-50 is recommended for use in EBMs to help reduce pump pressures by controlling rheologies or whenever increased ROP is desired. Recommended uses include running 20-50 bbl sweeps or by adding 2-3% ViChem LPR-50 by volume.
ViChem LPR-50
Well profilesCasing shoe: +\- 10,500 ftCurve: (+\- 90˚) obtained by +\- 12,500 ftLateral section TD: 15,500 ft - 17,300 ftMud WT: 15.5 ppg - 16.5 ppgBit size: 6.75 inBHT: 275˚ F - 325˚ F
ViChem LPR-50s added lubricity increases ROP, reduces the need for OBM support products
ViChem LPR-50 case studies demonstrate time and cost savings*
ROP
(FEE
T/H
OU
R)
DEPTH (FEET)
010,000 11,000 12,000 13,000 14,000 15,000 17,000
7 with
12 withouth
16,000
10
20
30
40
50
60
70
80ROP
Comparison
Rigs Running with
ViChem LPR-50
Rigs Running without ViChem LPR-50
Wetting Agent 7.5 10.9
Emulsifier 2’ 4.75 5.4
Emulsifier 1’ 3.25 3.8
TOTAL 15.5 20.1
ViChem LPR-50’s proven ability to increase ROP not only helps drillers save tens-of-thousands-of-dollars daily in rig-related costs, but also reduces the need for OBM support products. In this example, rigs using ViChem LPR-50 achieved significant cost savings through faster ROP and a significant reduction in emulsifier use.
Pump Pressures ROPInitial Final % Drop Initial Final % Increase
Well #1 3219 3072 4.6% 70 82 14.6%
Well #2 3222 3032 5.9% 95 112 18.3%
Well #3 3301 3055 7.5% 98 125 27.6%
Torque Coefficient of LubricityInitial Final % Drop Initial Final % Increase
Well #1 12,166 11,580 4.8% 0.074 0.063 14.9%
Well #2 13,021 12,174 6.5% 0.094 0.079 16.0%
Well #3 12,556 11,902 5.2% 0.112 0.087 22.3%
Field and laboratory data were collected during three field trials of ViChem LPR-50. Fifty bbl sweeps were run containing 3.0% by volume ViChem LPR-50. Data were collected before and after treatment. Slugging pit samples were collected before and after addition of LPR-50.
Overall, the use of ViChem LPR-50 resulted in increased ROP, stable rheology, and lower mud costs.
The rheology-stabilizing effects of ViChem LPR-50 also reduced the volume of support products needed to control elevated HTHP filtrate typically associated with higher temperatures as OBM ages.
ViChem Specialty Products LLC • 936.441.1770 • vichemecofluids.com© 2014 ViChem Specialty Products LLC. All rights reserved. Printed in USA.
ViChem LPR-50 offers significant speed and cost advantages
ViChem LPR-50 additive as 2-3% of total volume improves ROP by up to 49%, lowers friction coefficients by up to 40%, and reduces torque by up to 50% for OBM operations. Specially formulated for EBMs, ViChem LPR-50 also offers easy mixing, a stable viscosity index, improved rheology and HTHP filtrate, and a cost-effective solution for achieving higher lubricity.
High-performance and low toxicity ratings make it ideally suited to drilling in environmentally sensitive areas.
With ViChem LPR-50
Without ViChem LPR-50
Learn more about the high-performance leader in biodegradable lubricant additives. Call your ViChem representative today, or call ViChem direct at 936-441-1770. Look for ViChem on the web at www.vichemecofluids.com.
“ We first introduced LPR-50 in the Haynesville Shale. Running it in 50 bbl sweeps at 3% by volume, we saw an immediate reduction in torque and a significant improvement in ROP. Over time, we saw a 2-3 point reduction in yield point and gels, a 20% drop in HTHP filtrate, and a 50-100 volt increase in electrical stability. Emulsifier/wetting agent usage dropped 25% as well. The idea of adding lubricants to oil-based mud is still new so we always emphasize the upside of conditioning the mud. Directional drillers just love it.”
– Regional Drilling Fluids Manager