Upload
others
View
15
Download
1
Embed Size (px)
Citation preview
Low Location Lighting
High performance photoluminescent material
Our specialized technicians follow the entire LLL system starting from the analysis and project which will be approved by the classification authorities to continue on installation of the complete LLL- PL system on board. We also an approval service supplier by classification authorities for LLL testing and measurement. For the on board inspections we assign qualified technicians equipped with high quality Digital Photometer calibrated for testing LLL system which must be compliant with ISO 15370:2010 and IMO A. 752(18) resolutions.
Photoluminescent signs shall have the same performance as any installedphotoluminescent Low Location Lighting, according to ISO 15370.C&C manufacture the signs using MED approved photoluminescent material, CC/Glowmarine.
006/2013 CC/Glowmarine
C&C - Signs Makers Low Location Lighting 4
LLL - Full Service• Survey & Certificate;• Production;• Installation;• Test & Measurement.
BV 23338/B0 EC
C&C - Signs Makers Low Location Lighting 5
CC - LLL Photoluminescent SystemIMO Res. A.752(18) requires the PL strips should be no less than 75 mm wide. PL strips having a width less then that stated herein should be used only if their luminance is increased proportionally to compensate their width. C&C Shipping Solutions LLL system complies with the IMO and ISO standard, it is available in silver-anodised aluminium wall profiles in different heights and forms (different colours it’s available on request). The extrusions are designed to firmly grip the CC-GLOWMARINE Photoluminescent PVC strips upon insertion into the channel. Profiles can be fixed either with screws, flooring adhesive or a recommended double side adhesive tape (item code 7047 at page 83 of C&C general catalogue).
LLL Wall Angled Profile
Width 35 mm
Aluminium anodised ProfileCode CCAP35 / Lenght 1.5 mt
Photoluminescent PVC StripCode CCPL35 / Lenght 1 mt
Plastic End CapCode CCAC35
Width 50 mm
Aluminium anodised ProfileCode CCAP50 / Lenght 1.5 mt
Photoluminescent PVC StripCode CCPL50 / Lenght 1 mt
Plastic End CapCode CCAC50
Width 75 mm
Aluminium anodised ProfileCode CCAP75 / Lenght 1.5 mt
Photoluminescent PVC StripCode CCPL75 / Lenght 1 mt
Plastic End CapCode CCAC75
LLL Wall Flat Profile
Width 50 mm
Aluminium anodised ProfileCode CCFP50 / Lenght 1.5 mt
Photoluminescent PVC StripCode CCPL50 / Lenght 1 mt
Plastic End CapCode CCFC50
Width 75 mm
Aluminium anodised ProfileCode CCFP75 / Lenght 1.5 mt
Photoluminescent PVC StripCode CCPL75 / Lenght 1 mt
Plastic End CapCode CCFC75
Deck profile and special profileare available in different anodize colours as per costumer needs
Luminance value (glow duration) DIN 67510
Quality after 10 min after 60 min
IMO A.752 15 mcd/m2 2 mcd/m2
DIN 67510 20 mcd/m2 2.8 mcd/m2
C/C Glowmarine 100 mcd/m2 14 mcd/m2
(light source: 1000 lux / 5 minutes)
C&C - Signs Makers Low Location Lighting 6
ExitCode 201Size BF / AD / XCMaterial VT
ExitCode 200Size BF / AD / XCMaterial VT
ExitCode 202Size BF / AD / XCMaterial VT
Emergency exitCode 203Size BF / AD / XCMaterial VT
Exit (left)Code 221Size DB / CA / XBMaterial VT
Exit (right)Code 220Size DB / CA / XBMaterial VT
Assembly station (left)Code 210Size DB / CA / XBMaterial VT
Assembly station (right)Code 211Size DB / CA / XBMaterial VT
Exit (left)Code 213Size DB / CA / XBMaterial VT
Exit (right)Code 212Size DB / CA / XBMaterial VT
ArrowCode 214Size BB / AA / XXMaterial VT
StairsCode 216Size BB / AA / XXMaterial VT
StairsCode 215Size BB / AA / XXMaterial VT
Assembly stationCode 217Size BB / AA / XXMaterial VT
LifeboatCode 218Size BB / AA / XXMaterial VT
Key man pointCode 219Size BB / AA / XXMaterial VT
ExtinguisherCode 204Size BB / AA / XXMaterial VT
Fire alarmCode 205Size BB / AA / XXMaterial VT
Fire hose reelCode 206Size BB / AA / XXMaterial VT
Hose box with jetCode 207Size BB / AA / XXMaterial VT
Portable extinguisherCode 208Size BB / AA / XXMaterial VT
Manually operated call pointCode 209Size BB / AA / XXMaterial VT
Turn to openCode 6019Size CDMaterial LA
Turn to openCode 6020Size CDMaterial LA
LLL Sign and Marking
C&C - Signs Makers Low Location Lighting 7
Survey, Production, Installation, Test & MeasurementWe supply complete LLL turnkey project world-wide. Our specialized technicians follow the entire LLL system starting from the analysis and project of the drawings which will be approved by the classification authorities to continue on installation of the complete LLL-PL system on board. C&C Shipping Solutions is also an approval service supplier by classification authorities for LLL testing and measurement. For the on board inspections we assign qualified technicians equipped with high quality Digital Photometer calibrated for testing LLL system which must be compliant with ISO 15370:2010 and IMO A.752(18) resolutions.
Some info about LLL installation in accordance with Resolution A.752(18) and ISO 15370:2010
1. In all corridors, the visual effect of the LLL system shall be continuous, except where interrupted by intersections with other corridors, cabin door or local enlargement , to provide a visible delineation along the escape routes.
2. The LLL shall be installed at the door frame or at the door leaf up to the exit door handle. To prevent confusion, only exit door shall be marked with the LLL.
3. In all stairways on the escape route, LLL installed on the bulkhead shall be at a height no more than 300 mm above the forward edge of each step. The top and the bottom of each set of stairs shall be identified to show that there are no further steps.
4.All escape route and fire equipment location should be marked with photoluminescent signs.
5.In dead-end corridors, the LLL system shall include arrows or equivalent direction indicators, at intervals of no more than 1 m, pointing away from the dead end.
C&C Shipping Solutions S.r.lVia Borzoli, 109 Q/r16153 Genova, Italy
t +39 010 6001830 (r.a.)f +39 010 6518941
[email protected] www.cc-marine.com
www.cc-signsmakers.com