2
www.beyma.com THIELE-SMALL PARAMETERS 3 Notes: 1 The power capaticty is determined according to AES2-1984 (r2003) standard. 2 Program power is defined as power capacity + 3 dB. 3 T-S parameters are measured after an exercise period using a preconditioning power test. The measurements are carried out with a velocity-current laser transducer and will reflect the long term parameters (once the loudspeaker has been working for a short period of time). 4 The X max is calculated as (L vc - H ag )/2 + (H ag /3,5), where L vc is the voice coil length and H ag is the air gap height. TECHNICAL SPECIFICATIONS Nominal diameter Rated impedance Minimum impedance Power capacity 1 Program power 2 Sensitivity Frequency range Recom. enclosure vol. Voice coil diameter Bl factor Moving mass Voice coil length Air gap height X damage (peak to peak) 300 mm 12 in 8 Ω 6,5 Ω 350 W AES 700 W 97 dB 1W / 1m @ Z N 45 - 4.000 Hz 30 / 100 l 1,1 / 3,5 ft 3 63,5 mm 2,5 in 14,4 N/A 0,057 kg 19,5 mm 7 mm 27 mm Resonant frequency, f s D.C. Voice coil resistance, R e Mechanical Quality Factor, Q ms Electrical Quality Factor, Q es Total Quality Factor, Q ts Equivalent Air Volume to C ms , V as Mechanical Compliance, C ms Mechanical Resistance, R ms Efficiency, η 0 Effective Surface Area, S d Maximum Displacement, X max 4 Displacement Volume, V d Voice Coil Inductance, L e 43 Hz 5,5 Ω 5,3 0,41 0,38 103 l 240 µm / N 2,9 kg / s 1,9 % 0,055 m 2 8,25 mm 453 cm 3 0,6 mH SM-212 LOW FREQUENCY TRANSDUCER High power handling 350 W AES High sensitivity: 97 dB (1W / 1m) 2,5” copper voice coil Lightweight curvilinear cone KEY FEATURES Acústica Beyma SL - P.I. Moncada II, C/ Pont Sec, 1C - 46113 Moncada, Valencia (Spain) - Tel. +34 96 130 13 75 - [email protected] Extended controlled displacement: X max ± 8,25 mm 27 mm peak-to-peak excursion before damage Designed for low and mid frequencies reproduction SM Series

LOW FREQUENCY TRANSDUCER - Beyma · 2020-03-04 · LOW FREQUENCY TRANSDUCER Overall diameter Bolt circle diameter Baffle cutout diameter: - Front mount Depth Volume displaced by driver

  • Upload
    others

  • View
    18

  • Download
    0

Embed Size (px)

Citation preview

Page 1: LOW FREQUENCY TRANSDUCER - Beyma · 2020-03-04 · LOW FREQUENCY TRANSDUCER Overall diameter Bolt circle diameter Baffle cutout diameter: - Front mount Depth Volume displaced by driver

www.beyma.com

THIELE-SMALL PARAMETERS 3

Notes:

1 The power capaticty is determined according to AES2-1984 (r2003) standard.

2 Program power is defined as power capacity + 3 dB.

3 T-S parameters are measured after an exercise period using a preconditioning power test. The measurements are carried out with a velocity-current laser transducer and will reflect the long term parameters (once the loudspeaker has been working for a short period of time).

4 The Xmax is calculated as (Lvc - Hag)/2 + (Hag/3,5), where Lvc is the voice coil length and Hag is the air gap height.

TECHNICAL SPECIFICATIONS

Nominal diameterRated impedanceMinimum impedancePower capacity 1

Program power 2

SensitivityFrequency rangeRecom. enclosure vol.Voice coil diameterBl factorMoving massVoice coil lengthAir gap heightXdamage (peak to peak)

300 mm 12 in8 Ω

6,5 Ω350 WAES

700 W97 dB 1W / 1m @ ZN

45 - 4.000 Hz30 / 100 l 1,1 / 3,5 ft3

63,5 mm 2,5 in14,4 N/A0,057 kg19,5 mm

7 mm27 mm

Resonant frequency, fsD.C. Voice coil resistance, ReMechanical Quality Factor, QmsElectrical Quality Factor, QesTotal Quality Factor, QtsEquivalent Air Volume to Cms, VasMechanical Compliance, CmsMechanical Resistance, RmsEfficiency, η0 Effective Surface Area, Sd Maximum Displacement, Xmax 4

Displacement Volume, VdVoice Coil Inductance, Le

43 Hz5,5 Ω

5,30,410,38103 l

240 µm / N2,9 kg / s

1,9 %0,055 m2

8,25 mm453 cm3

0,6 mH

SM-212LOW FREQUENCY TRANSDUCER

High power handling 350 WAES

High sensitivity: 97 dB (1W / 1m) 2,5” copper voice coil Lightweight curvilinear cone

KEY FEATURES

Acústica Beyma SL - P.I. Moncada II, C/ Pont Sec, 1C - 46113 Moncada, Valencia (Spain) - Tel. +34 96 130 13 75 - [email protected]

Extended controlled displacement: Xmax ± 8,25 mm 27 mm peak-to-peak excursion before damage Designed for low and mid frequencies reproduction

SM Series

Page 2: LOW FREQUENCY TRANSDUCER - Beyma · 2020-03-04 · LOW FREQUENCY TRANSDUCER Overall diameter Bolt circle diameter Baffle cutout diameter: - Front mount Depth Volume displaced by driver

www.beyma.com

SM-212LOW FREQUENCY TRANSDUCER

Overall diameter

Bolt circle diameter

Baffle cutout diameter:

- Front mount

Depth

Volume displaced by driver

Net weight

Shipping weight

312 mm 12,3 in

294,5 mm 11,6 in

278 mm 10,9 in

132 mm 5,2 in

4 l 0,14 ft3

4,6 kg 10,1 lb

5,3 kg 11,7 lb

12/1

4

DIMENSION DRAWING

Acústica Beyma SL - P.I. Moncada II, C/ Pont Sec, 1C - 46113 Moncada, Valencia (Spain) - Tel. +34 96 130 13 75 - [email protected]

[Ω]

[Hz]

[dB]

MOUNTING INFORMATION

Note: Frequency response measured with loudspeaker standing on infinite baffle in anechoic chamber, 1W @ 1m

SM Series