Upload
tress
View
36
Download
0
Tags:
Embed Size (px)
DESCRIPTION
Low Energy Building Design Strategy. Low Carbon Design Aim. “ minimizing the impact on the wider environment through consuming the minimum resources possible in the building’s construction and operation. whilst providing a healthy comfortable building that meets the occupant’s requirements ” - PowerPoint PPT Presentation
Citation preview
Low Energy Building Design Strategy
Low Carbon Design Aim
• “minimizing the impact on the wider environment through consuming the minimum resources possible in the building’s construction and operation
• whilst providing a healthy comfortable building that meets the occupant’s requirements”
• we need a coherent design and evaluation strategy to help us achieve this!
Building & Systems Design
• meeting the needs of occupants (comfort, utility, etc.) whilst considering environmental impact and meeting a host of other sustainability and legal criteria means that building design is a complex process
• fundamentally a building a complex, integrated energy system
• it will not “work” unless properly designed and analysed
• the majority of buildings in the UK are poorly designed: poor occupant comfort, high energy consumption, reliant on systems to overcome basic design faults
• as a start we need to prioritise our design activities …
Design Hierarchy for Low Energy Performance
Form & Fabric
Efficient Systems & Operation
LZC Energy Supplies• Impact on final energy
performance
demand reduction
energy supplies
Design Hierarchy for Low Energy Performance• the point of the previous slide is that the 1st
priority in a low-energy building design should be:
- maximise the energy efficiency of the building by designing out the need for energy consuming systems (heating, cooling, lighting, etc.)
- maximise the energy efficiency of conventional energy consuming systems
- supply/offset energy demands using local zero-carbon sources
New Build Design Hierarchy for Low Energy
• without radically reducing the demand of a building (in comparison to the present-day standards) it would be almost impossible to achieve zero carbon operation
Demand Reduction Example
Demand Reduction Example
Demand Reduction Example
Demand Reduction
• All buildings have up to 4 basic energy needs:
Demand Reduction
• before deciding on what demand reduction measures it is worth looking at the demands themselves
• enables reduction measures to be prioritised
• as new build regulations change so energy efficiency priorities will change
• thermal electrical
Demand Reduction: Space Heating
• in northern Europe the predominant load in buildings is space heating
• … also the load that can be most effectively tackled
• there are a range of options available depending upon whether a design project is new build or retrofit
• however the basic aims are: – minimise heat loss rate to the
environment (fabric and infiltration)– maximise useful ‘free’ heat gains
Demand Reduction: Space Heating
Qf - fabric
Qi - infiltration
Qs - solar
Q g -
gain
s
ifhgsn
x xr QQQQQQ
dtdC 1
Qh - heat
Demand Reduction: Space Heating
• insulation (walls, windows, doors)
• reduction of infiltration– high quality construction, draft
stripping– MVHR
• maximise useful solar gain– positioning of glazing (south
facing)
Demand Reduction: Space Heating
• overall demand reduction measures are one of the most cost-effective ways to reduce carbon emissions – particularly in older buildings/retrofit projects
• Source: EST
Demand Reduction: Space Heating
1
10
100
1000
Insulation PV
Savings ratio £/tonne (over 30-year life)
Demand Reduction: Space Cooling
• in warmer weather or climates or buildings with high internal heat gains we need space cooling not heating
• note we may have a building that has one set of requirements in winter (minimise heating) and another in summer (minimise cooling) – continental climate
• this tends to be an electrical load, electricity is used for compressors and pumps in the cooling system
• basic aims are:– minimise heat gains from the environment (fabric,
infiltration, solar)– minimise internal heat gains– make use of thermal inertia and ‘free’ cooling
when available
Demand Reduction: Space Cooling
Qs - solar
Q g -
gain
s
ifcgsn
x xr QQQQQQ
dtdC 1
Qi - infiltration
Qf - fabric
Qc - cooling
Demand Reduction: Space Cooling
• shading (prevent solar radiation getting in)
• reflect solar (albedo)• bring in air from outside when T<Ti
• … otherwise prevent unwanted infiltration
• MVHR• insulation (prevent heat gains
through walls)• make use of thermal mass (plus
free cooling)• … or more exotic strategies
– ground cooling– evaporative cooling
Demand Reduction: Space Cooling
• the use of exposed thermal mass is typically employed in buildings (or spaces) likely to experience overheating:
– sunspaces
– areas of high occupancy
– areas with high equipment loads• thermal mass acts like a sponge –
absorbing surplus heat during the day and releasing the heat during the evening
• however to work effectively the release of heat in the evenings needs to be encouraged through flushing of the air inside the building
Demand Reduction: Space Cooling
insulation
exposed mass
daytime: Te > Tm
insulation
exposed mass
evening: Te < Tm
ventilation air
Qs - solar
Demand Reduction: Space Cooling
Thermal Mass Temps.
0
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
Hours
Tem
pera
ture
(C)
AmbientAir TempMass Temp
start of night flushend of night flushheat release from mass
heat gain by mass
Demand Reduction: Space Cooling
• useful in preventing overheating however:
– slow response to plant input
– more difficult to accurately control internal conditions (plant pre-heat required)
– risk of under-heating on colder mornings
– surface condensation risk
Demand Reduction: Space Cooling
• thermally massive buildings are highly dynamic thermal systems
• typically rely on thermal modelling to gauge the effects on performance
• … particularly when also dealing with night flush, etc.
Demand Reduction: Space Cooling
• testing thermal mass + night flush strategy with ESP-r
Demand Reduction: Hot Water
• hot water use is very building dependent– very little in offices/shops– medium sized load in dwellings– big load in hotels/hospitals
• there are a variety of measures to reduce the associate energy load
• ‘good housekeeping’:– reducing hot water temperature 60→45oC– Why do we need to supply hot water at 60oC?!
(scalding risk)– to eliminate legionella, just occasionally raise
tank temp to 60oC or use chemical or UV dosing
Demand Reduction: Hot Water
• technology “fixes”: – storage tank and pipe insulation – more efficient heating devices
(heat pumps, condensing gas boilers)
– aerating taps and nozzles (reduce flow of water)
– time limited taps/shower valves (prevent waste)
– ‘grey water’ heat recovery
Demand Reduction: Electricity• as with hot water there
are two main strategies for the reduction in use of electricity
• ‘good housekeeping’:– switching appliances off when
not used (better control– avoiding ‘standby’ mode– awareness of energy use ‘smart
meters’
Demand Reduction: Electricity
• Technology “fixes”:– low-energy appliances
(lighting, entertainment, heating, cooling ….)
– low energy fans and pumps (motors)
– daylight responsive lighting– occupancy sensors in
rooms– ‘active’ smart metering
(demand management)
Energy Supplies• there are two main needs –
heat and electricity (electricity could also supply heating/cooling needs)
• as with demands – available resources need to be analysed before deciding on appropriate supply measures
• … these should be appropriate for the demand of the building!
Energy Supplies
• available ‘renewable’ resources are entirely location dependent
Zero Carbon Electricity
• photovoltaics (PV) (solar resource)
• biomass CHP (biomass resource)
• SWECS (wind resource)
Low Carbon Electricity
• CHP (usually gas powered)– to achieve ‘zero carbon’ operation, resulting CO2 emissions
need to be offset by a zero carbon source
Zero Carbon Heat
• solar thermal (solar resource)
• biomass boiler (biomass resource)
Low Carbon Heat
• CHP (gas powered)• Heat pumps (electricity)• … energy consumption
needs to be offset by zero carbon sources
Evaluating Options...
• there is a wide range of options for demand reduction and energy supplies
• how to choose between them? • this requires performance
evaluation• this is an integral, iterative part
of the evolution of a building design
• this type of design model requires feedback (data) on the likely performance of a system ….
Selecting/designing a system
design team
design process
support environment
selection
implications
Performance Evaluation
• an appropriate support environment for the building design process is building environmental simulation
• simulation is the mathematical modelling of a building operating in realistic dynamic conditions
• allows the design team to assess environmental performance (human comfort, energy consumption, emissions, etc.)
Technical Assessment
• simulation enables a design team to make informed choices on a likely system’s performance accounting for the complex interactions between the fabric-occupants and systems
Technical Assessment
Mathematical model Performance assessment
Exercise – James Weir Building
Exercise – James Weir Building
• develop a “strategy” that would improve the James Weir Building
• this is one of the main teaching buildings in the University – yet is also one of the poorest energy performers, with exceptionally high electricity and space heating demand
• in addition – certain areas of the building (computer labs, lecture spaces in summer) over heat!!
Exercise – James Weir Building
• What could we do to improve this building?
• think about – • the characteristics of the building• uses of the building• constraints on improving energy
performance• feasible improvement measures• costs of improvement measures• ranking improvement measures
Group 1 ANDERSON CRAIG Group 5 BURNS NICHOLAS FARGE YANNICK CHARTON AURELIE CORALIE LOWE GRAEME KENNETH LAINE PIERRE SERRI GAUTHIER MCDAID MORNA
Group 2 ARMOUR CRAIG ALEXANDER Group 6 BERGE MAXIME BRESLIN MARC COCHRANE NEIL FLATMAN ROSS LAMBOT HELENE PASCALINE ANDREE LUNDBERG EBBA MENSAH CLAUDE TOSELLI ALESSANDRA
Group 7 WILSON TOM Group 3 ARTHUR SAMUEL DEMANGE SIMON
BELTAGUI HODA LAVIER BERTRAND GAUDISSART SIMON MICHEL MAURICE RAIHAN HASHIR MACDONALD MICHAEL BICEGO MATHIEU Group 8 BONEY ADAM
DENOMME CHARLOTTE MARIE STEPHANIE Group 4 BARTON ROSS LLAMBIAS SEGOLENE
CASSELS FRASER RUTNOWSKI BENOIT HANROT ASTRID MACGREGOR GRAEME ZAMBEAUX AMELIE