8/9/2019 Love Block Party

1/2

Love Block Party

Kati Weaks (katistamps@yahoo.com)http://www.virtualconvention.biz/Katib.html

Lay out all of your supplies.

Decide which Dimensional Elements letters you will use with each block. You do notneed the letter O because we will be using a round picture with cardstock behind it to

represent this letter.

L Block:

1. Trace L on the striped paper. We will use the backside of the striped

paper which is Hollyhock.2. Cut out the L and adhere it to the Dimensional Element using the Liquid

Glass.

3. I used the Olive marker on the edges of the L so you couldnt see the

chipboard.

4. Set this letter aside.5. Cut out a 4x4 block of the floral b/t paper. You can ink up with edges

with the Hollyhock stamp pad if you like the distressed look.6. Place the b/t paper under the 4x4 block and the letter L on top. Make

sure you have the block facing the way you would like. I make it so that

the top of the block says Close To My Heart whenever possible.7. Position your 3 x 2 picture on the floral b/t paper.

8. Adhere the picture to the b/t paper with the Tombow Mono Adhesive.

9. Embellish the letter L if you would like. (I used the green in the Ricrac

Collection and some Organdy Ribbon--pink and white.)10. Use the Mini Glue Dots to adhere the L to the front of the block.

11. Use small dots of Liquid Glass in each corner of the b/t paper to adhere itto the back of the block. (Please note: If you use the Liquid Glass on thepicture, it will make it look funny. Just use the Liquid Glass on the paper,

not the picture!)

O Block:

1. Cut a 3x3 block of striped b/t paper.

2. Ink the edges with the Olive stamp pad if you prefer.3. Cut a 2 circle (diameter) from the Sunny Yellow cardstock.

4. Ink the edges of the circle with the Hollyhock stamp pad if you prefer.

5. Adhere the round picture (1 7/8 diameter) to the Sunny Yellow

circlethis is your letter O!6. Adhere the O to the striped b/t paper.

7. Use small dots of Liquid Glass in each corner of the b/t paper to

adhere it to the back of the block.8. Tie the pink from the Ricrac collection around the block. (I used Mini

Glue Dots to hold it in place on each side.)

9. Add any other embellishments youd like. (I have a round clip onmine.)

mailto:katistamps@yahoo.commailto:katistamps@yahoo.com

8/9/2019 Love Block Party

2/2

V Block:

1. Cut a 2x2 block of Hollyhock from the back side of striped b/t paper.2. Ink edges with the Olive stamp pad if you prefer. Then set this b/t paper

aside.

3. Ink the Dimensional Element V with the VersaMark Embossing StampPad.

4. Emboss with Sunny Yellow Embossing Powder and the craft heater.

5. I embossed using several layers of embossing powder to get it to lookreally smooth.

6. After its dry, embellish the V as you would like. (I used the Olive

Waxy Flax and the little heart from the Friendship Dangles.)

7. Position the letter V on top of the block, the 1 x1 picture and thehollyhock square.

8. Use the Mini Glue Dots to adhere the V on the top of the block.

9. Adhere the picture to the proper spot on the Hollyhock b/t paper.

10. Use small dots of Liquid Glass in each corner of the b/t paper to adhere itto the back of the block.

E Block:

1. Trace E on the striped b/tpaper.

2. Cut out the E and adhere it to the Dimensional Element using the Liquid

Glass.3. I used the Olive marker on the edges of the E so you couldnt see the

chipboard.

4. Embellish the E if you would like. (I used White Organdy ribbon.)5. Set this letter aside.

6. Cut out a 2x 3 block of the floral b/t paper. We will use the back,

which is Sweet Leaf.7. Ink the edges with the Hollyhock stamp pad if you prefer.

8. Position the letter E on top of the block, the 1 x 2 picture and the

Sweet Leaf b/t square.9. Use the Mini Glue Dots to adhere the E on the top of the block.

10. Adhere the picture to the proper spot on the Sweet Leaf b/t paper.

11. Use small dots of Liquid Glass in each corner of the b/t paper to adhere it

to the back of the block.