LongboardsMark H.

Drop Decks

• Most Expensive • Fast• Easy curving• Easy to balance• Good for downhill riding

Cruiser

• Cheapest• Harder to turn• Harder to balance• Good for street riding• Good for sharp turns

Pin Tail

Similar to the CruiserCheapestHard to balanceGood for flat paths

Process

1. Cut wood to size2. Cut out design3. Steam the wood for an hour so the wood can bend4. After steaming put in mold instantly5. Leave in mold for 8 hours6. Glue the 4 layers together and place back in the mold

for 8 hours7. Sand the whole board8. Paint, grip tape, install trucks and wheel