Upload
dinhhuong
View
219
Download
0
Embed Size (px)
Citation preview
Loctite® Concrete Solutions Physical Plant Repairs and ProtectionCatalog and Technical Guide
volume 1LT-4501
Focusing on Customer SupportOur highly experienced Application Engineers are committed to providing the highest level of technical support and assistance in the industry.
Working closely with local industrial suppliers and selectedEngineering Service Agents, our Application Engineers providefull process support, from maintenance assessment toimplementation of solutions.
Loctite® Fixmaster® and Loctite® Nordbak®concrete repair products REPAIR, REBUILD andRESURFACE concrete surfaces, improving safety and performance conditions, productivity, and functionality, all whileminimizing disruption to production.
In today’s harsh industrial environments, concrete floors and other concrete structuresendure constant abuse. With cure times ranging from 15 minutes to 24 hours, the family of Loctite® Fixmaster® and Loctite® Nordbak® concrete repair products offers a variety of mix and application temperatures for use in any environment. These two or three part,pre-measured epoxy and urethane systems are non-shrinking, 100% solids, and develop compressive strengths up to three to four times higher than concrete. They bond to concrete without the use of special bonding agents, and are appropriate for vertical, horizontal and overhead surfaces. The full line includes products in a wide variety of compression strengths, chemical and temperature resistance.
Creating PartnershipsLoctite® branded products are foremost in the business ofsolving and preventing customer’s problems. With Loctite®Fixmaster® and Nordbak® composite technology providing the foundation, customers get more than a product – they get a partner who will work side -by -side with them to create and implement innovative solutions.
Material Safety Data Sheets and Technical Data Sheets also available
by 24 -hour fax. 1.800.LOCTITE (562.8483)
1.800.263.5043 (within Canada)
For information on Manufacturing Reliability Training call: 1.800.LOCTITE (562.8483)
1.800.263.5043 (within Canada)
Visit the web forimmediate access to:
• Distributor Information
• Material Safety Data Sheets
• Technical Data Sheets
• Product Application Assistance
• Product Literature
• Bill of Lading Code Information
Table of Contents
1.0 Concrete Repair Selector Guide ................................................................................................... 2
2.0 Concrete Repair, Rebuild and Resurface
Rapid Setting .............................................................................................................................................. 3
High Compression Strength................................................................................................................... 4
Small Concrete Repair ............................................................................................................................. 4
Cracks ........................................................................................................................................................... 5
Expansion and Control Joints................................................................................................................ 5
Extreme Chemical Resistance................................................................................................................ 6
3.0 Grouting Selector Guide ................................................................................................................ 7
4.0 Grouting
General Industry Grouting ..................................................................................................................... 8
Marine Grouting........................................................................................................................................ 9
5.0 Technical Reference
Application Selector Guide .................................................................................................................. 10
Application Case Histories............................................................................................................. 11–12
Chemical Compatibility Chart ............................................................................................................ 13
2
Rebuilding and Resurfacing Damaged ConcreteRebuilding
andResurfacing
DamagedConcrete
GeneralConcreteCoating
(Horizontal orVertical Surfaces)
Does the application require extreme chemical resistance?
NO YES
High Compression Strength
Loctite®
Fixmaster® HighPerformance
QuartzPage 6
Loctite®
Nordbak®
ChemicalResistantCoatingPage 6
1.0 Concrete Repair Selector Guide
Concrete is everywhere in the industrial environment… floors, ramps, loading docks, stairs,pylons, buttresses, and more and chances are it needs to be fixed. Loctite® Fixmaster® and Loctite® Nordbak® high strength concrete repair products offer the solution to fill and restore concrete permanently, while minimizing disruption to production.
Small RepairsExpansion andControl Joints
Loctite®
Fixmaster®
Concrete RepairEpoxyPage 4
Loctite®
Fixmaster®
Flexible JointSealantPage 5
1.0
Loctite® Fixmaster®
Floor FillPage 4
Rapid Setting in any Environment
Loctite® Fixmaster®
Magna-CretePage 3
Cracks
Loctite®
Fixmaster®
Crack FillerPage 5
32.0
2.0 Concrete Repair, Rebuild and Resurface
Rapid Setting in any Environment• Two-component, magnesium phosphate-based kit• Fast setting with a working time of 5 to 20 minutes, depending on air
temperature – reducing repair time, labor costs, and down time• Bonds to old and new concrete as well as
most construction materials, including wood and steel• Compressive strength to 3,000 psi in two hours, 13,000 psi in 28 day cure• Can be applied in any temperature, as low as -15°F,
as it does not use a water additive• Cures to a non-porous, shrink- and crack-resistant finish• Freeze and thaw cycle resistant• Resists chemicals, including caustics, salt solutions, airport, and auto fluids• Resistant to bacteria and ultraviolet light• Can be applied over existing structural reinforcements
(rebar, screen mesh, etc.) even if rusted• Easy to mix and apply – mixes like concrete• Canadian Food Inspection Agency Approved
Typical Applications:• Repairing and restoring floors, ramps, loading docks, and concrete pillars• Filling potholes• Repairing parking structure joints• Repairing highways, roadways, bridge decks, and runways• Anchoring machinery• Grouting bedplates and soleplates• Anchoring bolts and handrails
LOCTITE® FIXMASTER® MAGNA-CRETE
1 gallon kit – 955515 gallon kit – 95555
2475 lb. Supersack kit – 4089810 lb. Activator – 36334
SEASONAL ADDITIVES:
1 lb. Winter Additive – 402701 lb. Summer Additive – 40271
RAPID SETTING
DID YOU KNOW?Concrete vs. Loctite® Fixmaster® Magna-Creteand Loctite® Fixmaster® High Performance QuartzConcrete is used for its compressive strength; however, itis not suitable for repair of other concrete surfaces.Concrete repairs are prone to delaminate and crack.This table highlights differences between concrete andLoctite® Fixmaster ® Magna-Crete or Loctite® Fixmaster ®
High Performance Quartz.
Property ConcreteLoctite® Fixmaster® Magna–Crete
or Loctite® Fixmaster®
High Performance Quartz
Requires chemical bondingagents to adhere to concrete
Yes No
Minimum thickness required toachieve compressive strength
100 mm 6 mm
Curing time 28 Days 1 to 24 hours
Chemical resistance Low High
Freeze/thaw resistant No Yes
42.0
LOCTITE® FIXMASTER® FLOOR FILL
10 lb. kit – 9936140 lb. kit – 99365
Small Concrete Repairs• Two-component, grey epoxy repair adhesive stick• Mixes in your hand, applies like putty• Waterproof, seals leaks, can be sanded,
drilled and painted• Fast! Cures in 5 to 10 minutes• Compressive strength to 12,000 psi• Shear strength to 700 psi• Tensile strength to 2,500 psi
Typical Applications:• Seals leaks in concrete walls and structures• Repairs and restores chipped/ broken concrete• Fills holes and cracks in floors,
walk and aisle ways, steps and curbs• Anchors railings, studs, and bolts• Repairs loading docks, warehouse floors, tile,
cracks, and seams
LOCTITE® FIXMASTER® CONCRETE REPAIR EPOXY STICK
4 oz. stick - 39366
SMALL CONCRETE REPAIR
HIGH COMPRESSION STRENGTH
High Compression Strength• Three -component, grey in color• 100% solids, self - leveling, will not shrink• Highest compressive strength to 15,000 psi• Corrosion and chemical resistance• Bonds to almost any clean substrate• 40 to 60 minute working time, full cure in 24 hours• Trowelable• Canadian Food Inspection Agency Approved
Typical Applications:• Repairing holes and spalled areas in floors,
ramps, stairs, loading docks, and more• Repairing pot holes, airport runways, and more• Anchoring and grouting machinery, bedplates,
soleplates, bolts, and handrails
52.0
Concrete Crack Filler• Two-component, epoxy repair adhesive• Natural in color (white/tan)• 100% solids, no solvents• Excellent workability and flow• 30 minute work time• Fills cracks in concrete, wood, masonry,
and previously coated surfaces
Typical Applications:• Cracks• Holes• Anchor bolt holes• Pinholes• Can be used as a skim coat for mildly spalled areas
LOCTITE® FIXMASTER® CRACK FILLER
1 gallon kit – 40346
CRACKS
Flexible Joint Sealant• Two-component, urethane-based sealant, grey in color• 100% solids – no solvents• Excellent adhesion• High chemical resistance• Excellent tensile strength, flexibility, and elongation• Linear ft./gallon usage chart available on Technical Data Sheet
Typical Applications:• Concrete expansion joints
LOCTITE® FIXMASTER® FLEXIBLE JOINT SEALANT
1 gallon kit – 40347
EXPANSION AND CONTROL JOINTS
62.0
Concrete Repair with Extreme Chemical Resistance• Two-component, grey in color• Designed for extreme chemical resistance to acids, alkalis, and solvents• Use over concrete in chemical containment areas• Easily trowelable and bonds to cement, 45 minute working life• Extended chemical resistance table available on Technical Data Sheet• Canadian Food Inspection Agency Approved
Typical Applications:• Chemical containment areas• Repairing spalled areas and holes and cracks in floors• Resurfacing ramps and stairs and chemical spill areas• Grouting
LOCTITE® FIXMASTER® HIGH PERFORMANCE QUARTZ
42 lb. kit – 96495
Concrete Coating with Extreme Chemical Resistance• Protects concrete and steel against extreme corrosion• Recommended for chemical containment areas• Apply by brush or squeegee
Typical Applications:• Lining of chemical containment areas• Chemical washdown areas
LOCTITE® NORDBAK® CHEMICAL RESISTANT COATING
11 lb. kit – 96092
EXTREME CHEMICAL RESISTANCE
Loctite® Nordbak® Chemical Resistant Coating is suitable forbrush, roller and pressure spray application.
Pressure spraying Loctite® Nordbak® Chemical ResistantCoating can be achieved with standard pressure pot or airlesssystems with a tungsten tip orifice size of 0.19 to 0.21 and amaximum hose length of 10 to 15 ft. Depending on conditionsand technique, up to four of the 11 lb. kits can be sprayed
through the line before cleaning is required, which will coverapproximately 200 square feet.
A solvent such as industrial paint thinners or acetone should beused to clean equipment. Cleaning may be required morefrequently if the product and ambient temperatures are high, toprevent the line from being clogged by curing product.
TIPS AND TRICKS: Pressure Spraying
3.07
Loctite® Fixmaster®
Fast Set GroutPage 8
Pour Depth Required?
NO YES
18" Maximum Pour Depth6" Maximum Pour Depth1" Pour Depth
Loctite® Fixmaster®
Deep Pour GroutPage 8
Loctite® Fixmaster®
Super GroutPage 9
Loctite® Fixmaster®
Marine ChockingPage 9
3.0 Grouting Selector Guide
Every piece of machinery and equipment in the industrial environment requires a suitablefoundation and mounting system to reduce vibrations and misalignment. Pumps, generators,compressors, conveyors, pulverizers, mills, fluid drives, turbines and more must all maintain proper support and permanent alignment in order to provide optimum performance and lowoperating costs. Loctite® Fixmaster® grouts offer the “foundation” needed to achieve optimumequipment efficiency and performance.
Is this a Marine Application?
4.0 Grouting
84.0
Grouting for Bolts and 1" Pour Depths or Less• Self - leveling, non-shrinking grout• Cures quickly• Can be poured to 1" thick• Compression strength and chemical resistance
superior to concrete• Forms strong bonds with old concrete and itself• Canadian Food Inspection Agency Approved
Typical Applications:• Pumps, machinery, lathes, and compressors• Leveling machinery• Setting anchor bolts• Use from 25 mm to 3 mm clearance
LOCTITE® FIXMASTER® Fast Set Grout
Grouting up to 6" Pour Depths• Aggregate- filled, epoxy system• For pours up to 6" thick• Self - leveling, non-shrinking• High strength material bonds to steel, concrete, and itself• Withstands high torque loading• Canadian Food Inspection Agency Approved
Typical Applications:• Grouting for:
✓ Diesel or gas engines, generators ✓ Mine hoists✓ Compressors ✓ Gantry cranes✓ Outboard bearings ✓ Pumps✓ Cone crushers ✓ Machinery
LOCTITE® FIXMASTER® Deep Pour Grout
5 gallon kit – 99545
GENERAL INDUSTRY GROUTING
21.4 lb. kit – 39637
94.0
Grouting up to 18" Pour Depths• Aggregate - filled, epoxy system• For pours up to 18" thick• Self - leveling, non-shrinking• Typical dry service temperatures of
-20°F to 225°F ( -29°C to +107°C)
Typical Applications:• Grouting for:
✓ Diesel or gas engines, generators✓ Cone crushers✓ Compressors✓ Mine hoists✓ Outboard bearings✓ Gantry cranes
LOCTITE® FIXMASTER® Super Grout
5 gallon kit – 33510
Marine Grouting• Two-component epoxy chocking system, available
in orange or green• Self - leveling, non-shrinking grout• Fast - curing system with outstanding chemical and
vibration resistance• High compressive strength withstands maximum loads• Lloyds, ABS, CFIA, NAVSEA Approved
Typical Applications:• Marine installations to include:
✓ Main engines✓ Drive engines✓ Winches✓ Hoists✓ Deck mounted equipment
LOCTITE® FIXMASTER® Marine Chocking
2 gallon kit green – 975722 gallon kit orange – 961021 gallon kit orange – 37316
MARINE GROUTING
Working time and cure depend on temperature and mass.• The higher the temperature,
the faster the cure• The larger the mass of material mixed,
the faster the cure
To SPEED THE CURE of composites at low temperature:• Store composite at room temperature• Pre-heat repair surface until warm to touch
To SLOW THE CURE of composites at high temperature:• Mix composites in small masses
to prevent rapid curing• Cool resin and hardener components
Loctite® Fixmaster ® and Loctite® Nordbak ®
products’ Curing Times
TIPS AND TRICKS:
5.0 Technical Reference
105.0
GROU
TING
CONC
RETE
REP
AIR,
REBU
ILD
AND
RESU
RFAC
E
P R O D U C T
� Preferred Choice � Good Choice
HIGH PERFORMANCE
Loctite® Fixmaster® Magna-Crete – Rapid Setting � � � � � �Loctite® Fixmaster® Floor Fill – High Compression � � �SMALL REPAIRS
Loctite® Fixmaster® Concrete Repair Epoxy Stick � � � � �CRACKS
Loctite® Fixmaster® Crack Filler � �EXPANSION AND CONTROL JOINTS
Loctite® Fixmaster® Flexible Joint Sealant � �EXTREME CHEMICAL RESISTANCE
Loctite® Fixmaster® High Performance Quartz � �Loctite® Nordbak® Chemical Resistant Coating � �GENERAL INDUSTRY
Loctite® Fixmaster® Fast Set Grout � � � � �Loctite® Fixmaster® Deep Pour Grout � � � �
Loctite® Fixmaster® Super Grout � � � �MARINE
Loctite® Fixmaster® Marine Chocking � � � �
CHOC
KING
(SHI
PS)
ANCH
ORBO
LT F
ASTE
NING
HIGH
WAY
S AN
D RO
ADW
AYS
RAM
PS A
ND
LOAD
ING
DOCK
S
ENGI
NE IN
STAL
LATI
ON
CONC
RETE
FLO
OR R
EPAI
R
GROU
T LI
GHT
EQUI
PMEN
T1"
OR
LESS
LEVE
LING
EQU
IPM
ENT
ACID
/CHE
MIC
AL R
ESIS
TANT
FLOO
R RE
PAIR
GROU
T HE
AVY
EQUI
PMEN
T1"
TO
6"
GROU
T HE
AVY
EQUI
PMEN
TTO
18"
LEVE
LING
FLO
ORS
Application Selector Guide
115.0
Application Case HistoriesConcrete is prone to degradation caused by corrosion, erosion, and chemical attack.Loctite® branded concrete repair products provide long term and easy to use solutionsto prevent degradation and restore concrete with minimal disruption to production.
CORROSION – Spalling:A common cause of concrete degradation is spalling.Because concrete is permeable, it is prone to waterdamage which causes embedded steel re - enforcementbars to corrode. The corroded steel bars expand andexert a force on the surrounding concrete causing the concrete to bulge and crack.
Loctite® Fixmaster® Magna-Crete and Loctite®Fixmaster® High Performance Quartz can be used tocreate a non-porous barrier against water damage orto reclaim damaged surfaces. Before coating andrepairing the concrete, corroded steel bars should firstbe coated with Loctite® Extend® Rust Treatment thatconverts the existing rust to a stable base.
VERTICAL CONCRETE REPAIR THAT WILL LASTTHROUGH MANY WINTERS TO COME:This bridge overpass was successfully repaired withLoctite® Fixmaster® Magna-Crete in early February. The vertical repair was especially easy because of theproduct’s rapid cure formula that can be mixed to any desired consistency, making it ideal for difficultvertical and overhead applications. And becauseLoctite® Fixmaster® Magna-Crete does not shrink orcrack and is freeze/thaw resistant, this repair is sure to last for many winters to come.
CRACKS AND EXPANSION JOINTSAll concrete will contract andexpand during the curing process and when subjected to temperature change. Thismovement is the primary cause of surface cracks.
Cracks and expansion joints canbe easily sealed using Loctite® Fixmaster® Crack Filler or Loctite® Fixmaster® FlexibleJoint Sealant. These products offer excellent adhesionto concrete and resist deterioration from weather,stress, movement, water, and many chemicals.
CULVERT RESURFACED WITHIN 5 DAYS WITHOUT DISRUPTION TO TRAFFIC:A culvert is a concrete conduitthrough which water can flowunder a road. This culvert haddeteriorated to a point wheredemolishment and rebuilding was considered the most viableoption of repair.
Estimated cost to demolish the culvert and rebuild was almost $100K and wouldrequire traffic to be diverted for up to 8 weeks.
Using Loctite® Fixmaster® Magna-Crete, the culvert’sconcrete walls were resurfaced and re -opened within 5 days without disruption to traffic.
125.0
CONCRETE FLOOR REPAIRED TO ENSURE LONG LIFE UNDER TOUGH CONDITIONS:One of the world’s largest hot roll steel millsexperienced concrete floor wearing and crumblingalong the edge of the de -scale pit beneath the steelproduction line. The problem was caused by dime-sized,de -scale particles falling off and hitting the edge of thepit. If the problem persisted, it would threaten the areawhere the rolling steel production equipment was setand a full production shutdown could result, causinghundreds of thousands of dollars in downtime.
The floor was repaired using a steel plate bonded withLoctite® Fixmaster® Deep Pour Grout. After a 24 -hourcure time, Loctite® Nordbak® Wearing Compound wasapplied to form an additional buffer to protect theunderlying material. All repairs were completed withinthe scheduled production equipment downtime.
CONCRETE RAMP REPAIRED AND REOPENED IN LESS THAN THREE HOURS:The crumbling of a concrete ramp jeopardized thebusy production schedule at an investment-castedaircraft and turbine parts factory. The ramp, leadingto a supply warehouse, became a hazard to personneland to the loads of expensive metal alloy ingotstransported to the warehouse via forklift. This type ofrepair typically takes 2 to 3 days with concrete dryingtime, which would cost the company tens ofthousands of dollars.
By using Loctite® Fixmaster® Magna-Crete, a two-component, rapid setting concrete repair andgrouting system, the work time was reduced to just 15 minutes, with a functional cure of 1 to 2 hours. The ramp was reopened to traffic the same day.
135.0
Loctite® Fixmaster® and Loctite® Nordbak®
Chemical Compatibility Chart
NOTE: 1. The above information does not constitute a recommendation of adhesive use. It is intended only as a guide for consideration by the purchaser with the expectation of favorable confirming test results. It is impossible to test adhesive’s reaction with the multitude of chemicals in existence, therefore, compatibility has been estimated based on a wide variety of customer experience.
2. With the stringent action of such chemicals as Freon, strong cold acids and caustics,thorough evaluation is suggested. Sealing of hot corrosive chemicals is not recommended.
3. Refer to Technical Data Sheet or contact Henkel Technical Services for use with chemicalsnot covered by this information.
★ Listing(s) may be Brand Name(s) or Trademarks for chemicals of Corporations other than Henkel.
(This is a list of chemical stability only. It does not constitute approval for use in the processing of foods,drugs, cosmetics, pharmaceuticals, and ingestible chemicals.)
Loctite® brand adhesives are not recommended for use in pure oxygen or chlorine environments or in conjunction with strong oxidizing agents, as explosive reaction can result.
RANGE SUMMARY ONLY.
For maximum chemical capability, use Loctite®
Fixmaster® High Performance Quartz or Loctite®
Nordbak® Chemical Resistant Coating.
Please consult your Henkel Application Engineer iffurther product specific information is required.
COMPATIBLE . . . . . . . . . . . . . . . . . . . . . . ✔
NOT COMPATIBLE . . . . . . . . . . . . . . . . . . . ✖
Acetic Acid . . . . . . . . . . . . . . . . . . . . . . . . . ✖
Acetic Acid . . . . . . . . . . . . . . . . . . . . . . . . . ✖
Acetone . . . . . . . . . . . . . . . . . . . . . . . . . . . . ✖
Alcohol, Amyl . . . . . . . . . . . . . . . . . . . . . . . . ✔
Alcohol, Benzyl . . . . . . . . . . . . . . . . . . . . . . ✔
Alcohol, Butyl . . . . . . . . . . . . . . . . . . . . . . . ✔
Alcohol, Ethyl . . . . . . . . . . . . . . . . . . . . . . . . ✖
Alcohol, Methyl . . . . . . . . . . . . . . . . . . . . . . ✖
Alcohol, Propyl . . . . . . . . . . . . . . . . . . . . . . ✔
Alum, Ammonium . . . . . . . . . . . . . . . . . . . . ✔
Alum, Chrome . . . . . . . . . . . . . . . . . . . . . . . ✔
Alum, Potassium . . . . . . . . . . . . . . . . . . . . . ✔
Alum, Sodium . . . . . . . . . . . . . . . . . . . . . . . ✔
Aluminum Chloride . . . . . . . . . . . . . . . . . . . ✔
Aluminum Sulphate . . . . . . . . . . . . . . . . . . . ✔
Ammonia Solutions . . . . . . . . . . . . . . . . . . . ✔
Ammonium Carbonate . . . . . . . . . . . . . . . . . ✔
Ammonium Chloride . . . . . . . . . . . . . . . . . . ✔
Ammonium Nitrate . . . . . . . . . . . . . . . . . . . ✔
Ammonium Phosphate . . . . . . . . . . . . . . . . ✔
Ammonium Sulphate . . . . . . . . . . . . . . . . . . ✔
Amyl Acetate . . . . . . . . . . . . . . . . . . . . . . . . ✖
Aniline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ✔
Aniline Dyes . . . . . . . . . . . . . . . . . . . . . . . . ✔
Asphalt, Emulsions . . . . . . . . . . . . . . . . . . . ✔
Asphalt, Molten . . . . . . . . . . . . . . . . . . . . . . ✔
Barium Carbonate . . . . . . . . . . . . . . . . . . . . ✔
Barium Chloride . . . . . . . . . . . . . . . . . . . . . ✔
Barium Hydroxide . . . . . . . . . . . . . . . . . . . . ✔
Barium Sulphate . . . . . . . . . . . . . . . . . . . . . ✔
Benzene . . . . . . . . . . . . . . . . . . . . . . . . . . . ✖
Brake Fluids . . . . . . . . . . . . . . . . . . . . . . . . ✔
Butyl Acetate . . . . . . . . . . . . . . . . . . . . . . . . ✖
Calcium Bisulphate . . . . . . . . . . . . . . . . . . . ✔
Calcium Carbonate . . . . . . . . . . . . . . . . . . . ✔
Calcium Chloride . . . . . . . . . . . . . . . . . . . . . ✔
Calcium Hydroxide . . . . . . . . . . . . . . . . . . . ✔
Calcium Sulphate . . . . . . . . . . . . . . . . . . . . ✔
Carbon Tetrachloride . . . . . . . . . . . . . . . . . . ✖
Carbonic Acid . . . . . . . . . . . . . . . . . . . . . . . ✔
Carnauba Wax . . . . . . . . . . . . . . . . . . . . . . . ✔
Chalk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ✔
China Clay . . . . . . . . . . . . . . . . . . . . . . . . . . ✔
Chloroacetic Acid . . . . . . . . . . . . . . . . . . . . . ✖
Chlorobenzene, Dry . . . . . . . . . . . . . . . . . . . ✖
Chloroform, Dry . . . . . . . . . . . . . . . . . . . . . . ✖
Chlorosulfonic Acid . . . . . . . . . . . . . . . . . . . ✖
Chromium Chloride . . . . . . . . . . . . . . . . . . . ✔
Chromium Sulphate . . . . . . . . . . . . . . . . . . . ✔
Clay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ✔
Creosote . . . . . . . . . . . . . . . . . . . . . . . . . . . ✖
Creosote, Cresylic Acid . . . . . . . . . . . . . . . . ✖
Cyclohexane . . . . . . . . . . . . . . . . . . . . . . . . ✔
Diacetone Alcohol . . . . . . . . . . . . . . . . . . . . ✖
Dibutyl Phthalate . . . . . . . . . . . . . . . . . . . . . ✔
Drying Oil . . . . . . . . . . . . . . . . . . . . . . . . . . ✔
Ethyl Acetate . . . . . . . . . . . . . . . . . . . . . . . . ✖
Ethylene Glycol . . . . . . . . . . . . . . . . . . . . . . ✔
Ferric Chloride . . . . . . . . . . . . . . . . . . . . . . . ✔
Ferric Nitrate . . . . . . . . . . . . . . . . . . . . . . . . ✔
Ferric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ✔
Ferrous Chloride . . . . . . . . . . . . . . . . . . . . . ✔
Ferrous Sulphate, 10% . . . . . . . . . . . . . . . . ✔
Ferrous Sulphate (Sat) . . . . . . . . . . . . . . . . . ✔
Fertilizer Sol . . . . . . . . . . . . . . . . . . . . . . . . ✔
Freon ★ . . . . . . . . . . . . . . . . . . . . . . . . . . . ✔
Fuel Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . ✔
Gasoline, Aviation . . . . . . . . . . . . . . . . . . . . ✔
Gasoline, Motor . . . . . . . . . . . . . . . . . . . . . . ✔
Glue, Animal Gelatine . . . . . . . . . . . . . . . . . ✔
Glue, Plywood . . . . . . . . . . . . . . . . . . . . . . . ✔
Glycerol . . . . . . . . . . . . . . . . . . . . . . . . . . . . ✔
Glycol Amine . . . . . . . . . . . . . . . . . . . . . . . . ✔
Grease, Lubricating . . . . . . . . . . . . . . . . . . . ✔
Heptane . . . . . . . . . . . . . . . . . . . . . . . . . . . ✔
Hexane . . . . . . . . . . . . . . . . . . . . . . . . . . . . ✔
Hydrogen Peroxide (dil) . . . . . . . . . . . . . . . . ✔
Hydrogen Peroxide (con) . . . . . . . . . . . . . . . ✔
Ink . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ✔
Isooctane . . . . . . . . . . . . . . . . . . . . . . . . . . ✔
Isopropyl Alcohol . . . . . . . . . . . . . . . . . . . . . ✔
Kerosene . . . . . . . . . . . . . . . . . . . . . . . . . . . ✔
Lactic Acid . . . . . . . . . . . . . . . . . . . . . . . . . ✔
Magnesium Bisulfite . . . . . . . . . . . . . . . . . . ✔
Magnesium Chloride . . . . . . . . . . . . . . . . . . ✔
Magnesium Hydroxide . . . . . . . . . . . . . . . . . ✔
Magnesium Sulphate . . . . . . . . . . . . . . . . . ✔
Maleic Acid . . . . . . . . . . . . . . . . . . . . . . . . . ✔
Manganese Chloride . . . . . . . . . . . . . . . . . . ✔
Mercuric Chloride . . . . . . . . . . . . . . . . . . . . ✔
Mercury . . . . . . . . . . . . . . . . . . . . . . . . . . . ✔
Mercury Dry . . . . . . . . . . . . . . . . . . . . . . . . ✔
Methyl Acetate . . . . . . . . . . . . . . . . . . . . . . . ✖
Methyl Cellosolve ★ . . . . . . . . . . . . . . . . . . ✖
Methyl Ethyl Ketone . . . . . . . . . . . . . . . . . . . ✖
Methylene Chloride . . . . . . . . . . . . . . . . . . . ✖
Mineral Spirits . . . . . . . . . . . . . . . . . . . . . . . ✔
Mud . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ✔
Naphtha . . . . . . . . . . . . . . . . . . . . . . . . . . . ✔
Naphthalene . . . . . . . . . . . . . . . . . . . . . . . . ✔
Nickel Ammonium Sulphate . . . . . . . . . . . . ✔
Nickel Chloride . . . . . . . . . . . . . . . . . . . . . . ✔
Nickel Sulphate . . . . . . . . . . . . . . . . . . . . . . ✔
Nitric Acid, 20% . . . . . . . . . . . . . . . . . . . . . . ✖
Oil, Creosote . . . . . . . . . . . . . . . . . . . . . . . . ✔
Oil, Emulsified . . . . . . . . . . . . . . . . . . . . . . . ✔
Oil, Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . ✔
Oil, Lubricating . . . . . . . . . . . . . . . . . . . . . . ✔
Ozone, Wet . . . . . . . . . . . . . . . . . . . . . . . . . ✔
Paint Remover, Sol. Type . . . . . . . . . . . . . . . ✔
Paraffin, Molten . . . . . . . . . . . . . . . . . . . . . . ✔
Paraffin, Oil . . . . . . . . . . . . . . . . . . . . . . . . . ✔
Perchlorethylene (Dry) . . . . . . . . . . . . . . . . .✖Petroleum Ether . . . . . . . . . . . . . . . . . . . . . .✔Petroleum Jelly . . . . . . . . . . . . . . . . . . . . . . .✔Phosphoric Acid (10% cold) . . . . . . . . . . . . .✔Phosphoric Acid (10% hot) . . . . . . . . . . . . . .✔Phthalic Acid . . . . . . . . . . . . . . . . . . . . . . . .✔Potash . . . . . . . . . . . . . . . . . . . . . . . . . . . . .✔Potassium Bromide . . . . . . . . . . . . . . . . . . .✔Potassium Carbonate . . . . . . . . . . . . . . . . . .✔Potassium Chlorate . . . . . . . . . . . . . . . . . . .✔Potassium Chloride Sol. . . . . . . . . . . . . . . . .✔Potassium Chromate . . . . . . . . . . . . . . . . . .✔Potassium Dichromate . . . . . . . . . . . . . . . . .✔Potassium Ferricyanide . . . . . . . . . . . . . . . . .✔Potassium Hydroxide . . . . . . . . . . . . . . . . . .✔Potassium Iodide . . . . . . . . . . . . . . . . . . . . .✔Potassium Nitrate . . . . . . . . . . . . . . . . . . . . .✔Potassium Permanganate . . . . . . . . . . . . . . .✔Potassium Sulphate . . . . . . . . . . . . . . . . . . .✔Propyl Alcohol . . . . . . . . . . . . . . . . . . . . . . . .✔Propylene Glycol . . . . . . . . . . . . . . . . . . . . . .✔
Rosin, Wood . . . . . . . . . . . . . . . . . . . . . . . . .✔Rosin, in Alcohol . . . . . . . . . . . . . . . . . . . . . .✔Rosin, Size . . . . . . . . . . . . . . . . . . . . . . . . . .✔Rubber, Latex . . . . . . . . . . . . . . . . . . . . . . . .✔
Sewage . . . . . . . . . . . . . . . . . . . . . . . . . . . .✔Silicone Fluids . . . . . . . . . . . . . . . . . . . . . . .✔Silver Nitrate . . . . . . . . . . . . . . . . . . . . . . . .✔Soap Solutions (Stearates) . . . . . . . . . . . . . .✔Sodium Acetate . . . . . . . . . . . . . . . . . . . . . .✔Sodium Aluminate . . . . . . . . . . . . . . . . . . . .✔Sodium Bisulfite . . . . . . . . . . . . . . . . . . . . . .✔Sodium Bromide . . . . . . . . . . . . . . . . . . . . . .✔Sodium Carbonate . . . . . . . . . . . . . . . . . . . .✔Sodium Chlorate . . . . . . . . . . . . . . . . . . . . . .✔Sodium Cyanide . . . . . . . . . . . . . . . . . . . . . .✔Sodium Hydroxide . . . . . . . . . . . . . . . . . . . .✔Sodium Hydroxide (20% Cold) . . . . . . . . . . .✔Sodium Hydroxide (20% Hot) . . . . . . . . . . . .✔Sodium Hydroxide (50% Cold) . . . . . . . . . . .✔Sodium Hydroxide (50% Hot) . . . . . . . . . . . .✔Sodium Hydroxide (70% Cold) . . . . . . . . . . .✔Sodium Hydroxide (70% Hot) . . . . . . . . . . . .✔Sodium Metasilicate . . . . . . . . . . . . . . . . . . .✔Sodium, Nitrate . . . . . . . . . . . . . . . . . . . . . .✔Sodium, Nitrite – Nitrate . . . . . . . . . . . . . . . .✔Sodium Phosphate, Mono . . . . . . . . . . . . . . .✔Sodium Phosphate, Tri . . . . . . . . . . . . . . . . .✔Sodium Silicate . . . . . . . . . . . . . . . . . . . . . .✔Sodium Sulphide . . . . . . . . . . . . . . . . . . . . .✔Stannic Chloride . . . . . . . . . . . . . . . . . . . . . .✔Starch . . . . . . . . . . . . . . . . . . . . . . . . . . . . .✔Starch Base . . . . . . . . . . . . . . . . . . . . . . . . .✔Stearic Acid . . . . . . . . . . . . . . . . . . . . . . . . .✔Steep Water . . . . . . . . . . . . . . . . . . . . . . . . .✔Sterilization Steam . . . . . . . . . . . . . . . . . . . .✔Styrene . . . . . . . . . . . . . . . . . . . . . . . . . . . . .✔Sulphuric Acid (7 to 40%) . . . . . . . . . . . . . . .✖Sulphuric Acid (40 to 75%) . . . . . . . . . . . . . .✖
Sulphuric Acid (75 to 95%) . . . . . . . . . . . . . .✖Sulphuric Acid (95 to 100%) . . . . . . . . . . . . .✖
Tannic Acid (cold) . . . . . . . . . . . . . . . . . . . . .✔Tamin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .✔Tar and Tar Oil . . . . . . . . . . . . . . . . . . . . . . .✔Tartaric Acid . . . . . . . . . . . . . . . . . . . . . . . . .✔Tetraethyl Lead . . . . . . . . . . . . . . . . . . . . . . .✔Toluene . . . . . . . . . . . . . . . . . . . . . . . . . . . . .✖Trichlorethylene . . . . . . . . . . . . . . . . . . . . . .✖Trichlorethylene, Dry . . . . . . . . . . . . . . . . . . .✖Turpentine . . . . . . . . . . . . . . . . . . . . . . . . . .✔
Water, Acid, Below pH 7 . . . . . . . . . . . . . . . .✔Water, pH 7 to 8 . . . . . . . . . . . . . . . . . . . . . .✔Water, Alkaline, Over pH 8 . . . . . . . . . . . . . .✔Water, De-Ionized . . . . . . . . . . . . . . . . . . . . .✔Water, De-Ionized, Low Conductivity . . . . . . .✔Water, Gritty . . . . . . . . . . . . . . . . . . . . . . . . .✔Water, Mine Water . . . . . . . . . . . . . . . . . . . .✔Water, Potable . . . . . . . . . . . . . . . . . . . . . . .✔Water, River . . . . . . . . . . . . . . . . . . . . . . . . .✔Water, Sandy . . . . . . . . . . . . . . . . . . . . . . .+✔
Water, “White”, low pH . . . . . . . . . . . . . . . . .✔Water, “White”, high pH . . . . . . . . . . . . . . . .✔Wax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .✔Wax, Emulsions . . . . . . . . . . . . . . . . . . . . . .✔
Xylene . . . . . . . . . . . . . . . . . . . . . . . . . . . . .✖Zinc Chloride . . . . . . . . . . . . . . . . . . . . . . . .✔Zinc Galvanizing . . . . . . . . . . . . . . . . . . . . . .✔Zinc Hydrosulphite . . . . . . . . . . . . . . . . . . . .✔Zinc Sulphate . . . . . . . . . . . . . . . . . . . . . . . .✔
GASES
Acetylene . . . . . . . . . . . . . . . . . . . . . . . . ✔
Air . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ✔
Butane . . . . . . . . . . . . . . . . . . . . . . . . . . ✔
Carbon Dioxide . . . . . . . . . . . . . . . . . . . . ✔
Carbon Monoxide . . . . . . . . . . . . . . . . . . ✔
Chlorine Dry . . . . . . . . . . . . . . . . . . . . . . ✔
Chlorine Wet . . . . . . . . . . . . . . . . . . . . . . ✔
Coke, Oven Gas (Cold) . . . . . . . . . . . . . . . ✔
Coke, Oven Gas (Hot) . . . . . . . . . . . . . . . ✔
Ethane . . . . . . . . . . . . . . . . . . . . . . . . . . ✔
Gas, Manufacturing . . . . . . . . . . . . . . . . . ✔
Gas, Natural . . . . . . . . . . . . . . . . . . . . . . ✔
Hydrogen Gas (Cold) . . . . . . . . . . . . . . . . ✔
Methane . . . . . . . . . . . . . . . . . . . . . . . . . ✔
Natural Gas, Dry . . . . . . . . . . . . . . . . . . . ✔
Nitrogen Gas . . . . . . . . . . . . . . . . . . . . . . ✔
Nitrous Oxide . . . . . . . . . . . . . . . . . . . . . ✔
Ozone . . . . . . . . . . . . . . . . . . . . . . . . . . . ✔
Producer Gas, 50 PSI . . . . . . . . . . . . . . . ✔
Propane . . . . . . . . . . . . . . . . . . . . . . . . . ✔
Sulphur Dioxide . . . . . . . . . . . . . . . . . . . . ✔
Sulphur Dioxide (Dry) . . . . . . . . . . . . . . . ✔
Sulphur Trioxide Gas . . . . . . . . . . . . . . . . ✔
Loctite® Flooring SolutionsPhysical Plant Repairs and ProtectionCatalog and Technical Guide
volume 1LT-4501
In today’s harsh industrial environments, facility floors endure constant abuse and therepair and maintenance of these areas present an on-going challenge to facility engineers.Loctite® Fixmaster® and Loctite® Big Foot™ floor coating systems provide the solutionsneeded to keep facilities looking good and performing great. The systems include concrete repair products, primers and sealants, topcoats, and sealants for expansion andcontrol joints. These two - or three-part, pre-measured epoxy and urethane systems are non-shrinking and will bond to concrete without the use of special bonding agents.
The full line includes water-based and 100% solids products in a wide variety of compressionstrengths, chemical and temperature resistance. No matter what the application, whetherthere are widespread areas or a few deteriorated worn out damaged areas that require spotrepair, these high performance systems will provide the performance demanded for eachtype of floor condition and environment.
Focusing on Customer SupportOur highly experienced Application Engineers are committedto providing the highest level of technical support andassistance in the industry.
Working closely with local industrial suppliers and selectedEngineering Service Agents, our Application Engineers providefull process support, from maintenance assessment toimplementation of solutions.
Creating PartnershipsLoctite® branded products are foremost in the business ofsolving and preventing customer’s problems. With Loctite®Fixmaster® and Nordbak® composite technology providing the foundation, customers get more than a product – they get a partner who will work side -by -side with them to create and implement innovative solutions.
Material Safety Data Sheets and Technical Data Sheets also available
by 24 -hour fax. 1.800.LOCTITE (562.8483)
1.800.263.5043 (within Canada)
For information on Manufacturing Reliability Training call: 1.800.LOCTITE (562.8483)
1.800.263.5043 (within Canada)
Visit the web forimmediate access to:
• Distributor Information
• Material Safety Data Sheets
• Technical Data Sheets
• Product Application Assistance
• Product Literature
• Bill of Lading Code Information
Loctite® flooring systems REPAIR, REBUILDand RESURFACE industrial floors. Theseflooring systems protect your floors, extendservice life, and improve safety.
Table of Contents
1.0 Surface Preparation......................................................................................................................... 2
2.0 Concrete Repair ................................................................................................................................ 3
3.0 Floor Sealants and Topcoats
Selector Guides .......................................................................................................................................... 4
Topcoats .................................................................................................................................................. 5–7
Primers and Sealants................................................................................................................................ 8
4.0 Anti-Slip Floor Coatings
Anti-Slip Floor Coatings................................................................................................................... 9–11
Primers and Sealants ...................................................................................................................... 12–13
Accessories................................................................................................................................................. 14
5.0 Expansion and Control Joints .................................................................................................... 15
6.0 Technical Reference
Topcoats Color Comparison Chart ..................................................................................................... 16
Anti -Slip Coating Physical Test Data ................................................................................................. 16
Anti -Slip Coating Chemical Compatibility Chart.......................................................................... 17
Topcoats Chemical Compatibility Chart........................................................................................... 18
2
1.0 SurfacePreparation
Surface ProfileAcid etching, sandblasting, scarifying and shot blasting are four common surface preparation methods. These methods are used to remove surface contamination, old coatings and loose substrate, creating a rugged miniature mountain and valley finish. This surface roughness is known as surface profile.
Surface profile is critical to coating performance as it improves adhesion by increasing surface area andproviding a keyed anchor pattern. Surface profiles will vary depending on the type of abrasive particles,equipment and technique utilized. Each technique has benefits and drawbacks so choosing the right methodcomes down to time, manpower, and available equipment. The diagram below illustrates these four techniques,the steps involved, and preparation time required.
Surface CleaningChemical contaminants are not readily visible and can penetrate deep into the surface of the floor. Thesecontaminants, including grease, oils, acids, etc., can interfere with the adhesion of the coating despite anymechanical preparation that has been done. It is important to chemically clean all substrates with an industrial strength cleaner and degreaser such as Loctite® Natural Blue® Biodegradable Cleaner and Degreaser if there is any chance of contamination issues.
1.0
SURFACE PREPARATION PERFORMANCE COMPARISON
ACID ETCHING
600 sq. ft. /hr.(150 sq. ft./gal.)
• Clean floor with detergent
• Profile with acid
• Flush and clean up
• Dispose of acid
• Wait for floor to dry
SANDBLASTING
750 sq. ft./hr.(one nozzle)
• Protect equipmentand workers
• Clean and profile floor
• Extensive dust andcontaminant clean up
SCARIFYING
500 sq. ft./hr.(16" cleaning path)
• Protect equipmentand workers
• Clean and profile floor
• Wait for floor to dry
BLASTRACSHOT BLASTING
1000 sq. ft./hr.(10" cleaning path)
• Clean and profile floor
H O W M A N Y S T E P S I T T A K E S
32.0
2.0 Concrete Repair
In addition to the surface preparation of removing contaminants,old coatings and any adverse moisture conditions, any cracks or unlevel surfaces should be repaired. Loctite® Fixmaster® concreterepair products offer the solution to fill and restore concrete andare designed to improve the effectiveness and durability of the highperformance Loctite® floor coating systems.
Concrete Crack Filler• Two-component, natural in color (white/tan), epoxy repair adhesive• 100% solids, no solvents• Excellent workability and flow• 30 minute working time, 6 hour recoat, 24 hour functional cure• Fills cracks in concrete, wood, masonry, and previously coated surfaces• Coverage: 230 cubic inches per gallon
Typical Applications:• Cracks• Holes
LOCTITE® FIXMASTER® CRACK FILLER
1 gallon kit – 40346
CRACK FILLER
Epoxy Floor Resurfacer• Trowel applied surfacing and leveling system• Much higher physical properties than concrete• High build finish• Durable, hygienic, food grade, non-slip finish• Fast cure allows for minimal downtime
(12 hour foot traffic, 18 hour full service)• Pre-packaged in convenient kits
Typical Applications:• Spalled concrete• Large holes and cracks
LOCTITE® FIXMASTER® EPOXY FLOOR RESURFACER
KIT (must add aggregate color) :
40326 – 20 sq. ft. kit40327 – 480 sq. ft. kit
40328 – 1440 sq. ft. kit
AGGREGATE COLOR (must add to kit components) :
40325 – 40 lb. bag cement40737 – 40 lb. bag deck grey40738 – 40 lb. bag haze grey
40739 – 40 lb. bag tile red
FLOOR RESURFACER
43.0
3.0 Floor Sealants and Topcoats
Easy to mix and use, Loctite® Fixmaster® floor coating systems offer the solutions needed tokeep facilities looking good and performing great. These two- or three -part, pre -measuredepoxy and urethane systems are non-shrinking and will bond to concrete without the use ofspecial bonding agents. Available in multiple colors, these coatings offer high chemicalresistance and provide a hard wearing and durable surface.
What type of exposure will the floor system see?
Extreme Chemical Attack
Loctite® Fixmaster®
High Solids Novolac Epoxy
Page 6
UV Exposure/Abrasion
Loctite® Fixmaster®
Superior PerformanceUrethane Floor Coating
Page 7
Industrial Wear
Loctite® Fixmaster®
Self Leveling Flooring Epoxy
Page 5
Are there moisture issues?
No
Loctite® Fixmaster®
High SolidsFloor Coating Primer
Page 8
Yes
Loctite® Fixmaster®
Water Based EpoxyPrimer/Sealer
Page 8
TOPCOATS
PRIMERS AND SEALANTS
3.05
TOPCOATS
Self Leveling Flooring Epoxy• Two-component, 100% solids, high performance
self - leveling floor coating• Provides a high gloss, seamless, hygienic surface
that is extremely hard wearing and durable• Zero V.O.C., extremely low odor• Film thickness can be varied (10 mil minimum)• Recoat in 8 hours (minimum), 24 hour foot traffic cure,
72 hour full service cure• Offers high chemical resistance• Available in clear, haze and deck grey, sandstone, and tile red• Coverage: 260 sq. ft. per gallon• Recommended System:
FIRST COAT – Loctite® Fixmaster® High Solids Floor Coating Primer or Loctite® Water Based Epoxy Primer/Sealer
SECOND COAT – Loctite® Fixmaster® Self Leveling Flooring Epoxy
High Build Self Leveling Flooring Epoxy• Three-component, 100% solids system for floors
requiring films of 30 mils or greater• Full system includes 1x 25 lb. bag high build additive + 5 gallons
of self leveling epoxy (3.5 gallons resin and 1.5 gallons hardener)• Coverage: 50 sq. ft. per 6 gallon mix• Recommended System:
FIRST COAT – Loctite® Fixmaster® High Solids Clear Floor Coating Primeror Loctite® Fixmaster® Water Based Epoxy Primer/Sealer
SECOND COAT – Loctite® Fixmaster® Self Leveling Flooring Epoxy
Typical Applications:• New or old concrete• Masonry• Wood
LOCTITE® FIXMASTER® SELF LEVELING FLOORING EPOXY
1 GALLON KITS (complete) :
clear – 40329deck grey – 40332haze grey – 40334sandstone – 40336
tile red – 40338
5 GALLON KITS:
1.5 gallon clear hardener – 40331 1.5 gallon standard hardener – 40342 1.5 gallon fast set hardener – 40341
(a clear or color resin must be added)
3.5 gallon clear resin – 40330 3.5 gallon deck grey resin – 40333 3.5 gallon haze grey resin – 40335 3.5 gallon sandstone resin – 40337
3.5 gallon tile red resin – 40339 (a hardener must be added)
HIGH BUILD25 lb. bag high build additive – 40343
(add to any complete 5 gallon kit)
63.0
Novolac Epoxy Coating• Two-component, high build, novolac epoxy coating• High solids (80%)• High chemical resistance ideal for chemical containment areas• Low V.O.C., low odor• Easily applied by brush, roll, or spray (11 to 13 mils)• Can be used with fabric/fiberglass laminate systems• 8 hour cure, 7 day full service cure• Coverage: 100 sq. ft. per gallon• Recommended System:
FIRST COAT – Loctite® Fixmaster® Water Based Epoxy Primer/SealerSECOND COAT – Loctite® Fixmaster® High Solids Novolac EpoxyTHIRD COAT – Loctite® Fixmaster® High Solids Novolac Epoxy
Typical Applications:• New or old concrete• Masonry• Wood
LOCTITE® FIXMASTER® HIGH SOLIDS NOVOLAC EPOXY
5 GALLON KIT:
3.5 gallon grey resin – 40344 (must add hardener)
1.5 gallon hardener – 40345(must add resin)
Working time and cure depend on temperature and mass.• The higher the temperature,
the faster the cure• The larger the mass of material mixed,
the faster the cure
To SPEED THE CURE of composites at low temperature:• Store composite at room temperature• Pre-heat repair surface until warm to touch
To SLOW THE CURE of composites at high temperature:• Mix composites in small masses
to prevent rapid curing• Cool resin and hardener components
Loctite® Fixmaster ® and Loctite® Nordbak ®
products’ Curing Times
TIPS AND TRICKS:
73.0
Superior Performance Urethane• Interior/exterior, high solids, polyester aliphatic floor coating• High gloss finish provides abrasion and stain resistance• Recoat in 8 hours (minimum), 24 hour foot traffic cure,
72 hour full service cure• Offers high chemical resistance• Superior color retention and chalk resistance• Anti - slip finish available (2 oz. and 10 oz. bottles)• Line striping in white and safety yellow available• Easily applied by brush, roll, or spray (3 to 4 mils)• Coverage: 250 sq. ft. per gallon• Two Recommended Systems:
FIRST COAT – Loctite® Fixmaster® High Solids Floor Coating PrimerSECOND COAT – Loctite® Fixmaster® Self Leveling Flooring EpoxyTHIRD COAT – Loctite® Fixmaster® Superior Performance UrethaneOR… FIRST COAT – Loctite® Fixmaster® High Solids Floor Coating PrimerSECOND COAT – Loctite® Fixmaster® Superior Performance
Urethane Floor CoatingTHIRD COAT – Loctite® Fixmaster® Superior Performance
Urethane Floor Coating
Typical Applications:• New or old concrete• Masonry• Wood
LOCTITE® FIXMASTER® SUPERIOR PERFORMANCE URETHANE FLOOR COATING
1 GALLON KITS (complete) :
clear – 40316deck grey – 40311haze grey – 40309sandstone – 40305
tile red – 40307
5 GALLON KITS:
1.6 gallon clear hardener – 40318 1.6 gallon hardener – 40313
(a clear or color resin must be added)
3.3 gallon clear resin – 40317 3.3 gallon deck grey resin – 40312 3.3 gallon haze grey resin – 40310 3.3 gallon sandstone resin – 40306
3.3 gallon tile red resin – 40308 (a hardener must be added)
ANTI-SLIP2 oz. anti-slip additive – 40315
10 oz. anti-slip additive – 40314
LINE STRIPING:1 gallon kit white – 40353
1 gallon kit safety yellow – 40354
83.0
Water Based Primer• Clear, two-component water based primer• Thin mil film (2 to 3 mils)• Low viscosity for maximum penetration• Effective barrier coat over many existing finishes• Easy to apply (brush, roll, or spray application)• Convenient recoat properties (6 to 48 hours recoat)• Excellent for use over acid- etched concrete• Coverage: 250 sq. ft. per gallon
Typical Applications:• New or old concrete• Masonry• Wood
LOCTITE® FIXMASTER® WATER BASED EPOXY PRIMER/SEALER
2 GALLON KIT (complete) :
40348
10 GALLON KIT:
10 gallon resin – 40349 (must add hardener)
10 gallon hardener – 40351 (must add resin)
High Solids Primer• Clear, high solids primer• Fast curing, penetrating primer
(Dry to touch 8 hours, recoat in 8 to 36 hours)• Low odor, V.O.C. compliant• High build, low viscosity for use over mechanically
prepared substrates (shot blast)• Reduces bubbling and pinholes that occur
when coating porous substrates• Coverage: 200 sq. ft. per gallon
Typical Applications:• New or old concrete• Masonry• Wood
LOCTITE® FIXMASTER® HIGH SOLIDS FLOOR COATING PRIMER
1 GALLON KIT (complete) :
clear – 40319
5 GALLON KIT:
3.5 gallon clear resin – 40320 (must add hardener)
1.5 gallon clear hardener – 40321 (must add resin)
PRIMERS AND SEALANTS
94.0
4.0 Anti-Slip Floor Coatings
According to OSHA, there are over 2,000,000 injuries due to slips and falls every year. 80% ofthese falls result in lost time and 12% require hospitalization. On top of lost time, there is anaverage direct cost of $28K for a disability slip or fall. Prevention is a necessity! Loctite® Big Foot™products provide tough, long- lasting anti-skid surfaces for added safety. Loctite® Big Foot™coatings are easy to apply and stand up to heavy traffic and harsh environments.
Choosing an Anti-Slip CoatingWhen choosing an anti -slip coating there are several factors to consider, the most important of which is profile size. All of the Loctite® Big Foot™ anti-slip coatings are filled with aluminum oxide to provide superior wear properties,so the important decision to make is on the profile size. A more aggressive profile will provide better traction and ahigher coefficient of friction, while a lower profile would provide a better walking surface and would be easier to cleanin addition to the anti -slip properties. It is also important to consider the substrate that is being coated and the type ofexposure the coating will endure. The following chart will help guide you through your choices on anti -slip coatings:
Heavy RollingEquipment Traffic
Most AggressiveProfile and OdorSensitive Areas
Do you have pedestrian or vehicular traffic?
Pedestrian Vehicular
Loctite® Big Foot ™
Vehicular GradePage 11
Loctite® Big Foot ™
Zero V.O.C.Page 11
Heavy Pedestrian or Light Rolling
Traffic
Light PedestrianTraffic and Enhanced
Cleanability
Loctite® Big Foot™ HeavyDuty Pedestrian Grade
Page 10
Loctite® Big Foot ™ LowProfile Pedestrian Grade
Page 9
Asphalt Outdoor or Flexible
Applications
Loctite® Big Foot™
Acrylic Pedestrian GradePage 10
Anti-Slip Coating for Light Pedestrian Traffic• Two-component, epoxy anti-slip floor and deck coating• Reduces slips and falls in the workplace• Low profile is ideal for light traffic and offers enhanced cleanability • Low odor• Maintains an attractive appearance• Resists gasoline, oil, acids, alkalis, and aliphatic solvents• Fire retardant when cured• 24 hour light pedestrian traffic cure, 72 hour heavy pedestrian traffic cure• Coverage: 90 sq. ft. per gallon with roller, 120 sq. ft. per gallon when sprayed
Typical Applications:• Any concrete, wood, tile or metal surface with light pedestrian traffic
LOCTITE® BIG FOOT™ LOW PROFILE PEDESTRIAN GRADE
1 gallon kit safety yellow – 40352
ANTI-SLIP FLOOR COATINGS
104.0
1 gallon kit black – 360451 gallon kit grey – 95591
1 GALLON KITS:
1 gallon kit black – 962111 gallon kit grey – 96261
1 gallon kit safety yellow – 40302
5 GALLON KITS:
5 gallon kit grey – 962655 gallon kit safety yellow – 40303
Anti-Slip Coating for Heavy Pedestrian or Light Rolling traffic• Single -component, epoxy anti- slip floor and deck coating• Reduces slips and falls in the workplace• Resists gasoline, oil, acids, alkalis, and aliphatic solvents• Fire retardant when cured• 12 hour light pedestrian traffic cure, 72 hour heavy pedestrian traffic cure• Coverage: 50 sq. ft. per gallon with roller, 40 sq. ft. per gallon
with trowel, 60 sq. ft. per gallon when sprayed
Typical Applications:• Any concrete, wood, tile or metal surface with
heavy pedestrian or light rolling traffic
LOCTITE® BIG FOOT™ HEAVY DUTY PEDESTRIAN GRADE
Anti-Slip Coating for Asphalt, Outdoor or Flexible Applications• Single -component, elastomeric anti - slip coating• Reduces slips and falls in the workplace• Offers optimum adhesion to asphalt and flexible applications• Resistant to weathering• 4 hour light pedestrian traffic cure, 24 hour heavy pedestrian traffic cure• Coverage: 70 sq. ft. per gallon with roller,
125 sq. ft. per gallon when sprayed
Typical Applications:• Any concrete, wood, tile or metal surface
where a f lexible anti -slip coating is required
LOCTITE® BIG FOOT™ ACRYLIC PEDESTRIAN GRADE
114.0
Anti-Slip Coating for Heavy Rolling Equipment Traffic Applications• Two-component, anti - slip coating• Reduces slips and falls in the workplace• Resists gasoline, oil, acids, alkalis, and aliphatic solvents• Fire retardant when cured• 12 hour light traffic cure, 72 hour heavy traffic cure• Coverage: 40 sq. ft. per gallon with roller, 50 sq. ft. per gallon with trowel,
60 sq. ft. per gallon when sprayed
Typical Applications:• Any concrete, wood, tile or metal surface where an
extremely durable anti -slip coating is required
LOCTITE® BIG FOOT™ VEHICULAR GRADE
1 gallon kit black – 962211 gallon kit grey – 96251
Anti-Slip Coating for Heavy Vehicular Traffic in Odor-Sensitive Areas• 100% reactive, solvent - free, two-component, anti - slip epoxy coating• Creates an extremely durable anti - slip coating that
withstands heavy vehicular traffic• No solvents formulation allows for use in odor sensitive areas• Reduces slips and falls in the workplace• Superior resistance to chemicals and wear• Provides safer traction for heavy vehicular traffic• Resists most acids, alkalis, solvents, gasoline, oil, grease,
alcohol, jet fuels, hydraulic fluids, salt water, and detergents• Fire retardant when cured• Good impact resistance• 24 hour light traffic cure, 72 hour heavy traffic cure• Coverage: 20 to 35 sq. ft. per gallon with roller, 40 sq. ft. per gallon with
trowel, 60 sq. ft. per gallon when sprayed
Typical Applications:• Any concrete, wood, tile or metal surface where a solvent - free,
heavy -duty anti-slip finish is required
LOCTITE® BIG FOOT™ ZERO V.O.C.
1 gallon kit black – 962311 gallon kit grey – 39915
124.0
PRIMERS AND SEALANTS
When do I need to use a primer?It is always recommended that a primer is used before applying an anti-slip coating. Primers increase adhesion to the substrate and also seal porosity when applying on concrete. The decision on which primer to use is based on the product being used and the substrate. The following chart will assist you in choosing the correct product for your application:
Concrete/Porous Surface
Loctite® Big Foot™
Water Based Primer/Sealer(Non-Acrylic Loctite® Big Foot ™ products)
Page 12
Metal Surface
Is this a concrete/porous or metal surface?
Loctite® Big Foot™ Acrylic Primer(Loctite ® Big Foot ™ Acrylic
Pedestrian Grade only)Page 13
Loctite® Big Foot™ Metal Primer(For all Loctite® Big Foot ™ products)
Page 13
Water Based Primer/Sealer• Two-component sealing system• Increases adhesion and coverage of Loctite® Big Foot™ anti- slip coatings
on concrete, wood, tile, and other porous substrates• Low odor, low V.O.C. makes it ideal for kitchens,
hospitals, and beverage plants• Abrasion resistant• Resists most mild acids, alkalis, salts, gasoline, and oils• Quick 3 to 6 hour dry time ensures good intercoat
adhesion with Loctite® Big Foot™ topcoats• Coverage: 250 sq. ft. per gallon
Typical Applications:• To be used as a base coat for non-acrylic Loctite® Big Foot™
anti - slip coatings on porous surfaces, wood, and concrete
LOCTITE® BIG FOOT™ WATER BASED PRIMER/SEALER
1 gallon kit clear – 94142
134.0
Primer for Acrylic Anti-Slip Coatings• Single - component, clear epoxy-polyamide primer• Zero V.O.C. water based acrylic primer• Increases adhesion and coverage of Loctite®
Big Foot™ Acrylic Pedestrian Grade anti - slip coatings• Quick 1 to 2 hour dry time ensures good intercoat
adhesion with Loctite® Big Foot™ acrylic topcoat• Coverage: 250 sq. ft. per gallon
Typical Applications:• To be used as a base coat for Loctite® Big Foot™ Acrylic Pedestrian Grade
anti - slip coatings on porous surfaces, wood, and concrete
LOCTITE® BIG FOOT™ ACRYLIC PRIMER
1 gallon kit clear – 95581
Primer for Metal Surfaces• Two-component, grey epoxy -polyamide primer• Increases adhesion between all Loctite® Big Foot™
anti -slip coatings and metal surfaces• Provides excellent protection against aggressive and
corrosive environments• 4 hour working time, 12 hour functional cure time• Coverage: 270 sq. ft. per gallon
Typical Applications:• To be used in conjunction with all Loctite® Big Foot™ anti - slip
coatings on metal surfaces
LOCTITE® BIG FOOT™ METAL PRIMER
1 gallon kit grey – 96132
144.0
LOCTITE® BIG FOOT™ PHENOLIC ROLLER CORES (HEAVY DUTY, VEHICULAR, ZERO V.O.C.)
Typical Applications:• Use with Loctite® Big Foot™ Acrylic Pedestrian
Grade Coating, Acrylic Primer, Metal Primer, andWater Based Primer/Sealer
LOCTITE® BIG FOOT™ BRISTLE ROLLER CORES (ACRYLIC PEDESTRIAN AND PRIMERS)
1 per case – 96153
ANTI-SLIP FLOOR COATING ACCESSORIES
1 per case – 96121
Typical Applications:• Use with all Loctite® Big Foot™ coatings (1 gallon kits only)
LOCTITE® BIG FOOT™ MIXER BLADES
1 per case – 96131
Typical Applications:• Use with Loctite® Big Foot™ Heavy Duty,
Vehicular and Zero V.O.C. Grade Coatings
155.0
5.0 Expansion and Control Joints
The treatment of flexible joints will compensate for movement and prevent the newlycoated surface from cracking and having premature joint failures. Application of Loctite®Fixmaster® flexible sealants will ensure optimum performance and aesthetics for theLoctite® brand floor coating system.
Flexible Joint Sealant• Two-component, grey, glossy urethane-based sealant• Tough, pourable system• Excellent adhesion• High chemical resistance• Excellent tensile strength, flexibility, and elongation• 30 minute pot life, 5 days full service• Coverage: 230 cubic inches per gallon
Typical Applications:• Expansion joints
LOCTITE® FIXMASTER® FLEXIBLE JOINT SEALANT
Liquid Joint Sealant• Two-component, black urethane liquid• Tough, pourable system• Excellent adhesion• High chemical resistance• Excellent tensile strength,
flexibility, and elongation
Typical Applications:• Expansion joints
LOCTITE® FIXMASTER® FLEX 80™ LIQUID
1 lb. kit – 974136 lb. kit – 97412
1 gallon kit – 40347
6.0 Technical Reference
166.0
LOCTITE®
BIG FOOT™
FRICK-TABERABRASION
ASTM-F-510
IMPACTRESISTANCE
ASTM-D-2794
COEFFICIENTOF FRICTIONDRY RUBBERASTM-F-609
COEFFICIENTOF FRICTIONWET RUBBERASTM-F-609
COEFFICIENTOF FRICTIONOILY RUBBERASTM-F-609
CLEANABILITYUNSEALEDSURFACE
ASTM-D-3450
CLEANABILITYSEALED
SURFACEASTM-D-3450
Acrylic Pedestrian Grade 750 Pass 1.20 1.20 0.90 Poor Fair
Heavy Duty Pedestrian Grade 197 Pass 1.17 1.00 0.88 Poor Fair
Low Profile Pedestrian Grade 736 Pass 0.95 0.86 0.51 Average Good
VehicularGrade 234 Pass 1.05 1.05 0.86 Poor Very Good
Zero V.O.C. 265 Pass 1.05 0.85 0.75 Good Excellent
PHYSICAL TEST DATA: Loctite® Big Foot ™ Anti-Slip Coatings
COLOR COMPARISON CHART: Loctite® Fixmaster® Topcoats
• Results are based upon independent laboratory testing in a controlled environment. Actual field results may vary.
• Frick-Taber abrasion resistance is a wear test measurement reported in number of milligrams of coating removed after 10,000 revolutions on the test device.
• Impact resistance is passing if no cracking or delamination occurs at 30 foot pounds per square inch of impact.
Deck Grey Haze Grey Sandstone Tile Red White Safety Yellow
Self Leveling Flooring Epoxy Urethane Line Striping
Product Comparison Charts
176.0
Loctite® Big Foot™ Anti-Slip Coatings Chemical Compatibility Chart
TEST METHODASTM-D-543
ACRYLICPEDESTRIAN
HEAVY DUTYPEDESTRIAN
LOW PROFILEPEDESTRIAN
VEHICULAR ZERO V.O.C.
Acetone NR NR S NR S
Ammonium Hydroxide – 10% NR S S S S
Ammonium Hydroxide – 28% NR S S S S
Animal Blood S S S S S
Bleach Solution – 5% NR NR S S S
Citric Acid – 5% S S NR S S
Detergent Solution S S S S S
Ethyl Alcohol – 50% NR S S S S
Gasoline S S S S S
Hydrazine – 5% NR NR S NR NR
Hydrochloric Acid – 10% NR S S S S
Hydrochloric Acid – 35% NR S S NR S
Hydrogen Peroxide – 28% NR S S NR S
Hydrogen Peroxide – 3% NR S S S S
Methyl Ethyl Ketone NR S S S S
Milk S S S S S
Mineral Oil S S S S S
Mineral Spirits NR S S S S
Motor Oil S S S S S
Nitric Acid – 10% NR S S S S
Nitric Acid – 40% NR S S S S
Perchloroethylene NR S S NR S
Phenol – 5% NR S S NR NR
Sodium Borate – 5% S S S S S
Sodium Chloride – 10% S S S S S
Sodium Hydroxide – 1% NR S S S S
Sodium Hydroxide – 10% NR S S NR S
Sodium Hydroxide – 40% NR NR S NR S
Sodium Phosphate – 12% S S S S S
Sugar Syrup – 10% S S S S S
Sugar Syrup – 20% S S S S S
Sulfuric Acid – 10% NR S S S S
Sulfuric Acid 30% NR S NR NR NR
Tannic Acid – 5% NR S NR NR S
Tap Water S S S S S
Urine S S S S S
Vegetable Oil S S S S S
Xylene NR S S S S
S = Recommended for use in areas subject to intermittent splash and spillage.
NR = Not recommended for use.
Results are based upon independent laboratory testing in a controlled environment. Actual field results may vary.
186.0
C H E M I C A L Epoxy FloorResurfacer
Self LevelingFlooring Epoxy
SuperiorPerformance
Urethane
High SolidsNovolac Epoxy
Hydrobromic Acid S S NR SHydrochloric Acid – 20% R S S RHydrochloric, Concentrated S NR S NRHydrocyanic Acid S S S SHydrofluoric Acid S NR NR NRHydrogen Peroxide, Dilute S S S SHydrogen Sulfide S S S RHypo Solution R R S RHypochlorous Acid S NR NR SIodine S NR S SJet Fuel R R R RKerosene R R S RKetones R R S RKraft Cooking Oil, Acid R R S RKraft Cooking Oil – 250°F S NR S RLactic Acid – Dilute R S S RLinseed Oil R R S RMagnesium Chloride R R S RMagnesium Sulfate R R S RMaleic Anhydride S S S RMercuric Chloride S S S RMercurous Nitrate S S S SMethyl Alcohol (Methanol) S S S NRMethylene Dichloride NR NR NR NRMethyl Ethyl Ketone S NR S RMilk R R R RMineral Oil R R R RMolasses R R R RMotor Oil R R R RNaptha R R S RNickel Chloride R R S RNickel Sulfate R R S RNitric Acid – 10% R S S SNitric Acid – Concentrated NR NR NR NRNitrobenzene – 100% NR NR S SOleic Acid S S S ROxalic Acid S S S ROxygen R R R NRPhenol NR NR S NRPhosphoric Acid, Dilute R R R RPlating Solutions S S S SPotassium Carbonate R R R RPotassium Chloride R R S RPotassium Dicromate S S S RPotassium Hydroxide – 40% S S S RPotassium Nitrate S S R RSea Water R R R RSoap Solution R R R RSodium Bisulfate R R R RSodium Bichromate Solution – 66 g/100 R R R RSodium Carbonate R R R RSodium Chloride R R S RSodium Chlorite – 10 g/100 S S S RSodium Hydroxide – 50% R S R RSodium Hypochlorite S S S SSodium Methoxide S NR S SSodium Nitrate S S S NRSodium Phosphate, Tri- R S S NRSodium Sulfate R R R NRSodium Thiosulfate S S S NRStearic Acid R R S NRStannic Chloride R R S NRStyrene NR NR S RSugar R R R RSulfamic Acid R S S RSulfur Dioxide R R R RSulfuric Acid – 20% R S S RSulfuric Acid – 50% S NR S RSulfuric Acid – 95% NR NR NR RTannic Acid S S S RTartaric Acid R R S RTetrachloroethane NR NR S STetraethylene Pentamine R S S SToluene Sulfonic Acid S NR S RToluene NR NR S RTrichloroacetic Acid S NR S NRTrichloroethylene NR NR S STrisodium Phosphate R R S RTurpentine NR NR S RUrea R S S RUrine R R R RVinegar R S R RWater Acid, Hot, Steme S NR S SWater Boiling S S S SWax Emulsion R R R RWine R R R RXylene R R R RZinc Chloride S S S RZinc Sulfate S S S R
C H E M I C A L Epoxy FloorResurfacer
Self LevelingFlooring Epoxy
SuperiorPerformance
Urethane
High SolidsNovolac Epoxy
Acetaldehyde – Conc S S S SAcetic Acid – up to 12% R R S SAcetic Acid – 12 to 20% S S NR SAcetic Acid – over 20% S NR NR NRAcetone – 100% S NR S RAcids, Dilute Inorganic R R S RAcids, Concentrated S NR S SAcrylic Acid S NR S NRAir R R R RAlcohols R R R RAldehydes S S R SAllyl Chloride S S S SAlum, Ammonium R R S RAluminum Chloride R R S RAluminum Sulfate R R S RAluminum Potassium Sulfate R R S RAliphatic Hydrocarbons R R S RAmmonia – 10% R R R RAmmonia – 25% S NR R NRAmmonium Chloride S S S RAmmonium Bicarbonate R R S RAmmonium Bifluoride S S S RAmmonium Nitrate S S R RAmmonium Phosphate S S S RAmmonium Sulfate S S S RAmyl Acetate R S S RAmyl Alcohol R R S RAmyl Chloride S S S RAniline NR NR S NRAntimony Chloride, Tri- R R S RAromatic Hydrocarbons R NR S RBeer R S R RBenzeldehyde NR NR S RBenzene S NR S RBenzene Hexachloride R R S RBenzene Sulfonic Acid S NR S RBlack Liquor R R S RBleach Liquor R S S NRBoric Acid R R S RBromine Water S S S SButyl Acetate R S S RButyl Alcohol (Butanol) R R R RButyl Cellosolve R R S RButyric Acid R S S RCalcium Chlorate R S S SCalcium Chloride R R R RCalcium Hydroxide R S S RCalcium Hypochlorite R S S NRCarbon Bisulfide R S S SCarbon Tetrachloride S S S SCaustic Soda R R R RCaustic Potash R S R RChlorinated Solvents S S S SChlorine Solution S S S NRChlorine Gas R R S N/AChlorobenzene S NR S SChlorosulfonic Acid, Dilute R S NR RChromic Acid – up to 20% R R NR RChromic Acid – over 20% NR NR NR NRCitric Acid – 50% S S R RCitric Acid – Dilute 20% R R R RCopper Chloride R R S RCopper Sulfate R R S RCrude Oil, Sweet/Sour R R R RCyclohexanol – 100% R R S RCyclohexanone – 100% S NR S SDetergents R R R RDibutyl Phthalate S S R RDiethyl Ether R R S RDiethylene Triamine – 10% S NR S SDimethyl Phthalate S S S RDioxane NR NR NR SEther R S S REthyl Alcohol – 96% S S S REthyl Benzene R NR S REthylenediamine NR NR NR SEthylene Dichloride S NR NR SEthylene Glycol R R R RFatty Acids R R S RFerric Chloride R R R RFerric Nitrate S S S RFerric Sulfate R R R RFormaldehyde – 10% R R S RFormic Acid S NR S NRGasoline – Regular R R R RGasoline – Aviation R R R RGlycerin (Glycerol) R R R RHexane R R R RHexylene Glycol R R R R
Loctite® Fixmaster ® Flooring Topcoats Chemical Compatibility Charts
R = Recommended for use in areas subject to immersion or prolonged contactS = Recommended for use in areas subject to intermittent splash and spillage
Results are based upon independent laboratory testing in acontrolled environment. Actual field results may vary.
NR = Not recommended for use
XX
U.S.A.For your local Loctite® brand Adhesives and SealantsSpecialist, call: 1.800.323.5106For your nearest authorized Loctite® brand distributor, toplace an order, to arrange an in-plant seminar or fortechnical product assistance, call:1.800.LOCTITE (562.8483)
Henkel CorporationEngineering Adhesives1001 Trout Brook CrossingRocky Hill, Connecticut 06067Tel: 860.571.5100Fax: 860.571.5465
Henkel Corporationwww.henkel.us www.loctite.com
Henkel –Your partner worldwide
Except as otherwise noted, all trademarks in this catalogare trademarks of Henkel Corporation in the U.S. andelsewhere. ® denotes a trademark registered in the U.S.Patent and Trademark Office.© Henkel Corporation, 2006. All rights reserved. 3723 / LT-4501 (11/2006)
Henkel –Your partner worldwide
CanadaFor your local Loctite® brand Adhesives and Sealants Specialist, for your nearest authorized Loctite® brand distributor,to place an order, to arrange an in-plant seminar,or for technical product assistance, call:1.800.263.5043 (within Canada)
Henkel Canada CorporationEngineering Adhesives2225 Meadowpine Blvd.Mississauga, Ontario L5N 7P2Tel: 1.800.263.5043 (within Canada)Tel: 905.814.6511Fax: 905.814.5391
U.S.A.For your local Loctite
®brand Adhesives and Sealants
Specialist,call:1.800.323.5106For your nearest authorized Loctite
®brand distributor,to
place an order,to arrange an in-plant seminar or fortechnical product assistance,call:1.800.LOCTITE(562.8483)
Henkel CorporationEngineering Adhesives1001 Trout Brook CrossingRocky Hill, Connecticut 06067Tel: 860.571.5100Fax: 860.571.5465
Henkel Corporationwww.henkel.us www.loctite.com
Except as otherwise noted, all trademarks in this catalogare trademarks of Henkel Corporation in the U.S. andelsewhere. ® denotes a trademark registered in the U.S.Patent and Trademark Office.© Henkel Corporation, 2006. All rights reserved. 3723 / LT-4501 (11/2006)
CanadaFor your local Loctite
®brand Adhesives
and Sealants Specialist,for your nearest authorized Loctite
®brand distributor,
to place an order,to arrange an in-plant seminar,or for technical product assistance,call:1.800.263.5043(within Canada)
Henkel Canada CorporationEngineering Adhesives2225 Meadowpine Blvd.Mississauga, Ontario L5N 7P2Tel: 1.800.263.5043(within Canada)Tel: 905.814.6511Fax: 905.814.5391