Locksmith Education and 32nd Annual KDL Spring Trade …catalog.kdllink.com/PDF/2015 Trade Show Flyer PUBtoPDF.pdf · The objective of this class is to teach students how to make

Locksmith Education and 32nd Annual KDL Spring Trade Show

When Thursday May 7, 2015 Through Saturday May 16, 2015

Where Tukwila Community Center 12424 42nd Ave S Tukwila, WA 98168

KDL Hardware locksmith education classes begin Thursday 5/07 and continue through Saturday 5/16.

Visit www.kdlhardware.com and select the Education tab to view a complete list of available classes and class details.

KDL Hardware Supply 32nd Annual Spring Trade Show

Saturday May 16th 11 am - 3 pm

Please join us for all the fun, food and fabulous prizes!!

THREE FREE classes Saturday morning prior to the Trade Show.

Important Notice: All guests who register online for the

Trade Show will receive one additional entry into the 3 pm Grand Prize Drawing and one additional free spin on the

KDL Wheel of Prizes. To register for the Trade Show and to register for classes go to

www.kdlhardware.com and select the Sign Up for the Show and Classes

tab on the home page

Event Contact

Katie Woessner

800-926-7716 Ext 100

For more details regarding the

KDL 2015 32nd Annual Spring

Trade Show visit:

www.kdlhardware.com

Select the Trade Show Tab

HILTON GARDEN INN

1801 E Valley Road

Renton , WA 98057

Reservations 425-430-1414 BE CERTAIN TO MENTION THAT YOU ARE WITH THE KDL HARDWARE GROUP TO TAKE ADVANTAGE OF

THE $99/NIGHT SPECIAL GUEST ROOM RATE..

FOR EASY ACCESS TO THE CLASSES HELD NEARBY AT

THE TCC & THE CONVENIENCE OF FREE TRANSFERS

AND RESTAURANT ON SITE, WE SUGGEST THAT OUR

GUESTS STAY AT THE RENTON HILTON GARDEN INN

YOUR TERRIFIC NO CHARGE TRADE SHOW LUNCH IS CATERED

BY WARTHOG BBQ PIT & WILL BEGIN SERVING AT NOON

THE TRADE SHOW AND ALL OF THE TRADE SHOW CLASSES WILL

BE HELD AT THE

TUKWILA

COMMUNITY

CENTER

12424 42ND Ave S

TUKWILA, WA 98168

(** = One Full ALOA PRP point, * = One Half ALOA PRP point)

Sign up early! All classes are filled quickly on the first come, first served basis.

All classes are being held at

The Tukwila Community Center 12424 42nd Ave S, Seattle, WA 98168

Go to www.kdlhardware.com and select Sign Up for the Show and Classes from the main menu.

Complete the online registration form and Katie will bill you when necessary or call you for your

bank card information. The show is NO CHARGE to attend but one must register in advance.

For further show or classes information, Katie may be reached via email at

[email protected] or feel free to call her at 800-926-7716 extension 100.

Thurs & Fri 5/07 & 08 Safe Cracking 8 am - 5 pm ** Inc Lunch Arts Room “B” $200 25 Students Mon & Tues 05/11 & 12 Fundamental Locksmith Skills 8 am - 4 pm ** Inc Lunch Arts Room “A” $400 20 Students Monday 5/11/15 Bank Deposit Lock Servicing 8 am - 4 pm ** Inc Lunch Classroom “A” $75 15 Students Monday 5/11/15 Successful Site Survey 8 am - Noon * Inc Lunch Arts Room “B” $25 30 Students Monday 5/11/15 Smart Product Applications 1 pm - 3 pm ** Arts Room “B” $15 30 Students

Tuesday 5/12/15 Medeco Certification 8 am - 5 pm ** Inc Lunch Classroom “B” $75 20 Students Tuesday 5/12/15 Impression Keys for Locks 8 am - 4 pm ** Inc Lunch Classroom “A” $75 20 Students Tuesday 5/12/15 HES Basic Low Voltage Electricity 8 am - Noon * Inc Lunch Arts Room “B” $25 20 Students Tuesday 5/12/15 HES Advanced Electrical Systems 1 pm - 5 pm* Arts Room “B” $25 20 Students

Wednesday 5/13/15 Master Keying - Intermediate 8 am - 5 pm ** Inc Lunch Classroom “B” $75 15 Students Wednesday 5/13/15 Lock Picking 8 am - 4 pm ** Inc Lunch Classroom “A” $75 20 Students Wednesday 5/13/15 Best I/C Core Combinating Workshop 8 am - Noon * Inc Lunch Arts Room “A” $25 25 Students Wednesday 5/13/15 Adams Rite Storefront, Mechanical To Electrical Upgrade 8 am - Noon * Inc Lunch Arts Room “B” $25 16 Students Wednesday 5/13/15 HES Electric Strike Installation 1 pm - 3 pm * Arts Room “B” $15 15 Students Wednesday 5/13/15 Best Cylindrical & Mortise Locks 1 pm - 5 pm * Arts Room “A” $25 20 Students Wednesday 5/13/15 Alarm Lock Trilogy T2/T3 Manual 1 pm - 5 pm * Banquet “A” $25 15 Students Keypad Programming

Thursday 5/14/15 Master Key Training - Advanced 8 am - 5 pm ** Inc Lunch Classroom “B” $75 15 Students Thursday 5/14/15 Alarm Lock, Advanced Networx, Gateway, & Sequel Software 8 am - 5 pm ** Inc Lunch Classroom “A” $75 15 Students Thursday 5/14/15 Code Compliance, National & Local 8 am - Noon * Inc Lunch Arts Room “A” $25 20 Students Thursday 5/14/15 Basic Automotive Locks 8 am - Noon * Arts Room “B” $50 15 Students Thursday 5/14/15 Strattec 2015 Automotive Update 1 pm - 5 pm* Arts Room “B” $25 15 Students Thursday 5/14/15 ADA, The Fundamentals 1 pm - 5 pm* Arts Room “A” $25 25 Students

Friday 5/15/15 NWLA Locksmith Certification 8 am - 5 pm ** Inc Lunch Banquet “A” $75 15 Students

Friday 5/15/15 Cam/Cabinet Lock Servicing 8 am - 5 pm ** Inc Lunch Classroom “B” $75 15 Students Friday 5/15/15 Chasing the Spark 8 am - 5 pm ** Inc Lunch Classroom “A” $75 20 Students Friday 5/15/15 Installing Cylindrical Locks 8 am - 4 pm ** Inc Lunch Arts Room “B” $75 15 Students Friday 5/15/15 Advanced Diagnostics Automotive 9 am - 5 pm ** Inc Lunch Arts Room “A” $50 25 Students Key Programming with Tony Presidio and Kaba Ilco Transponder Training with Joy Skowron

Friday 5/15/15 Allegion NDE Wireless w/Engage Tech. 8 am - Noon * Inc Lunch Banquet “C” $25 15 Students Friday 5/15/15 LCN Closers & Von Duprin Exit Devices 1 pm - 4pm * Banquet “C” $25 15 Students

Saturday 5/16/15 Master Lock Door Hardware 8 am - 10 am Arts Room “A” No Charge Training Saturday 5/16/15 Olympus Cabinet Locks 8 am - 10 am Arts Room “B” No Charge Training Saturday 5/16/15 Inventory Control 8 am - 10 am Classroom “A” No Charge Training

Saturday 5/16/15 KDL Hardware Supply Tradeshow 11 am - 3 pm Main Exhibit Hall Admission is No Charge when registered in advance. All PREREGISTERED attendees are

treated to a wonderful lunch buffet catered by Warthog BBQ Pit. The buffet will begin serving at noon and will

continue through 2:00 pm. Grand Prize Drawing 3 pm Door Prizes & “Passport to Prizes” Drawings 3:15 - 4 pm

Supplying Peace of Mind Since 1919

FUNDAMENTAL LOCKSMITH SKILLS THIS IS A COMPREHENSIVE, TWO DAY COURSE

MONDAY MAY 11, 2015 8 AM - 4:00 PM TUESDAY MAY 12, 2015 8 AM - 4:00PM TUKWILA CONFERENCE CENTER 12424 42ND AVE S TUKWILA WA 98168

This course is a comprehensive introduction to the basics of locksmith skills, the use of locksmith tools and industry terminology. Students will develop the ability to: identify key blanks, work with key machines, disassemble, service and rekey common cylinders. Other subjects covered are: cylinder bypass methods including picking, shimming and impressioning, lockset types, functions, finishes, servicing and troubleshooting. Your instructor will also present an introduction to master keying, door hardware & installation basics, and customer service.. Students should bring small hand tools.

(This class fills quickly. Sign up early)

Instructor: GABE DE GAALON, CPL, OWNER GABES LOCK & KEY, CERTIFIED INSTRUCTOR

BANK DEPOSIT LOCK SERVICING

MONDAY MAY 11, 2015 8 AM - 4:00 PM TUKWILA CONFERENCE CENTER

12424 42ND AVE S TUKWILA , WA 98168

INSTRUCTOR: MATT MESSERER, CPL - Matt is widely known in the Seattle locksmith community

as being the local locksmith that is most well versed in the area of bank deposit lock servicing. Assisting Matt will be Gary Topp (CML, CMS, CSP, ALOA ACE Instructor). For many years, Gary has taught hundreds of classes for KDL, the NWLA and the PLA covering many areas of locksmith

Safe deposit lock service can be a very profitable part of your locksmith business. This type of lock is commonly found in hotel security boxes, assorted safes, safety deposit boxes and inner safe doors.

Overview of lever type locks ID locks commonly found in the field Methods of opening/servicing

Key making techniques Tools necessary for this type of service/repair Door repair methods

Students should bring small hand tools.

HANDS-ON

HANDS-ON

CLASS FEE $75 CLASSROOM “A” Includes Boxed Lunch

CLASS FEE $400 ARTS ROOM “A” Includes Boxed Lunch

3

SAFE CRACKING W/ DAVE McOMIE THIS IS A COMPREHENSIVE, TWO DAY COURSE

THURSDAY MAY 7, 2015 8 AM - 5:00 PM FRIDAY MAY 8, 2015 8 AM - 5:00PM TUKWILA COMMUNITY CENTER

INSTRUCTOR: DAVE McOMIE, CRL, CML, CST, ALOA ACE INSTRUCTOR

Morning lecture each day that is followed by afternoon hands-on drilling of safes. Topics: Troubleshooting, dial removal, drilling at the fence,

drilling a scope hole, scoping the change key hole, punching the lock bolt, punching the door bolts, drilling the lever screw, punching the handle

cam, bouncing electronic safes open and much, much more! BYOT (Bring your own tools). Dave will bring an assortment of scopes for sale but

no loaners. Feel free to bring any locked safes & get them opened for FREE !

CLASS FEE $200 ARTS ROOM “B” Includes Boxed Lunch HANDS-ON

CLASS ID - MT220GT

CLASS ID - TF225GT

CLASS ID - M115GT

This course covers the application of Securitron electrified locking products & accessories. Participants will cover applications and features of magnetic locks, touch sense devices, digital keypads, power supplies, delayed egress & more.

Medeco Certification Class

TUESDAY MAY 12, 2015 8 AM - 5 PM TUKWILA CONFERENCE CENTER 12424 42ND AVE S TUKWILA , WA 98168

This Medeco certification class is an eight hour technical training class on Medeco High Security Locks. The course covers the operation of high security door hardware cylinders, cam locks, Medeco style interchangeable core, and M3 BiLevel. Hands on exercises are used to disassemble &

assemble a Medeco mortise cylinder, decode a Medeco key, pin a cylinder to a decoded key and master key. Matrix master key reading, usable code rules, levels of key control, as well as M3 Logic as a component to a complete system are also included over the course of this session.

INSTRUCTOR: Factory Trained Instructor

CLASS FEE $75 CLASSROOM “B” Includes Boxed Lunch

4

MONDAY MAY 11, 2015 8AM - NOON TUKWILA CONFERENCE CENTER 12424 42ND AVE S TUKWILA , WA 98168

CONDUCTING A SUCCESSFUL SITE SURVEY

HANDS-ON

CLASS ID - MA30AR

CLASS FEE $25 ARTS ROOM “B” Includes Boxed Lunch

Conducting a successful site survey details how to define the best products for an opening. Including power supply, lock, entry device & exit device. Instructional & hands-on exercises covering the purpose of electric locking systems, walk through techniques, types of electric locking systems, electronic locking system component selection, brackets & accessories, system layout and hardware schedule forms. Common errors, tips & troubleshooting techniques will be examined.

MONDAY MAY 11, 2015 1 PM - 3 PM TUKWILA CONFERENCE CENTER 12424 42ND AVE S TUKWILA , WA 98168

SMART PRODUCT APPLICATIONS

HANDS-ON

CLASS ID - MP30ST


NEW CLASS

NEW CLASS

CLASS ID - T120ME

INSTRUCTOR: RODGER SCHMIDT, TECHNICAL PRODUCTS TRAINER


HANDS-ON

The objective of this class is to teach students how to make a key for almost any common pin or wafer lock. Wafer lock reading is included because it is integral to the task of making keys. Students need to bring:

HOW TO IMPRESSION KEYS FOR LOCKS

INSTRUCTOR: DEAN NICKEL, CJIL, CPL , ALOA ACE INSTRUCTOR Dean was a long-time locksmith for the State of Washington and is currently a Watson Security field technician. He has been teaching classes for KDL since 2002 and is an accomplished instructor.

TUESDAY MAY 12, 2015 8 AM - 4:00 PM TUKWILA CONFERENCE CENTER 12424 42ND AVE S TUKWILA , WA 98168

HANDS-ON


6” round & warding files 6” Pippin file Flat Bastard file Vision aid such as a magnifying visor

BASIC LOW VOLTAGE ELECTRICITY

TUESDAY MAY 12, 2015 8 AM - NOON TUKWILA CONFERENCE CENTER 12424 42ND AVE S TUKWILA , WA 98168

This entry level course is designed to educate students in the basic electronic knowledge needed to wire an electronic locking system. The class includes a balance of instructional and hands-on exercises. The following subjects are highlighted:

Key figures in electricity Voltage, current, resistance Electronic circuits Switches and relays


HANDS-ON

AC & DC electricity Fail safe/fail secure lock wiring Electronic components Use of multimeters


FACTORY REPORTS NEW & IMPROVED CLASS CONTENT & EXERCISES

Mag lock & electric strike troubleshooting Digital keypad troubleshooting Touch-sense bar troubleshooting Basic access control systems troubleshooting

This course is designed to educate students with basic electronic knowledge and use of a multimeter. This course covers advanced access control and system wiring, installations and product troubleshooting. Instructional and hands-on exercises cover these subjects:

Creating wiring diagrams Fire alarm interface Fail safe/secure lock system wiring Power supply troubleshooting

ADVANCED ELECTRICAL SYSTEMS

TUESDAY MAY 12, 2015 1 PM - 5 PM TUKWILA CONFERENCE CENTER 12424 42ND AVE S TUKWILA , WA 98168

RODGER SCHMIDT, TECHNICAL PRODUCTS TRAINER

CLASS FEE $25 ARTS ROOM “B” HANDS-ON


CLASS ID - T120GT

5

CLASS ID - TP20HE

CLASS ID - TA20HE

BEST I/C CORE COMBINATING WORKSHOP

WEDNESDAY MAY 13, 2015 8 AM - NOON TUKWILA CONFERENCE CENTER

12424 42ND AVE S TUKWILA , WA 98168

At the end of this course, participants will be able to cut Best keys & combinate i/c

cores. They will know how to use the Best Key Combinator and they will be familiar

with preventive maintenance. Students will also have a basic understanding of

Stanley Best master key systems, key control and record keeping.


The objective of this class is to teach students to pick almost any common pin or wafer lock. Wafer lock reading is part of the class because it is advantageous to the task of lock picking. Students need to bring :


One hook pick One ball pick One rake pick Three sizes of tension wrenches

CLASS FEE $75 CLASSROOM “A” Includes Boxed Lunch HANDS-ON

6

WEDNESDAY MAY 13, 2015 8 AM - 4:00 PM TUKWILA CONFERENCE CENTER 12424 42ND AVE S TUKWILA , WA 98168

LOCK PICKING

MASTER KEY TRAINING - INTERMEDIATE LEVEL

Students will review the mechanics of split-pin master keying and learn how to create their own systems while avoiding mistakes and keeping out of trouble. Topics include methods of master keying, progressing a KBA, designing a system, key symbols, using incidental master keys, avoiding key interchange and how to keep proper records of master key systems. This class is activity based with an emphasis on indus-try standards. Students should bring pens and pencils.

WEDNESDAY MAY 13, 2015 8 AM - 5:00 PM TUKWILA CONFERENCE CENTER 12424 42ND AVE S TUKWILA , WA 98168

INSTRUCTOR: RALPH FORREST-BALL, CML, CAL , ALOA ACE INSTRUCTOR Ralph is the owner of Emerald City Locksmith, a successful lock shop in Eugene, Or. He is a past vice-president of the Pacific Locksmith Association and is a very popular instructor of NW locksmith classes.

CLASS FEE $75 CLASSROOM “B” Includes Boxed Lunch HANDS-ON

CLASS ID - W115GT

CLASS ID - W120GT

CLASS ID - WA25BE

HANDS-ON

INSTRUCTOR: BOB KARRER, STANLEY BEST FACTORY TRAINED TRAINING SPECIALIST

7

This course covers the selection & upgrade of Adams Rite storefront mechanical &

electrified locking products. Participants will cover the variety of locking solutions for

aluminum doors, along with hands-on installation of mechanical and electrified locking

and exit hardware. With instructional and hands-on exercises covering these subjects:

WEDNESDAY MAY 13, 2015 8 AM - NOON TUKWILA CONFERENCE CENTER 12424 42ND AVE S TUKWILA , WA 98168

ADAMS RITE STOREFRONT PRODUCTS: MECHANICAL TO ELECTRICAL UPGRADE

HANDS-ON

Electric strikes 1850 deadbolt installation 4900 deadlatch & 4591 paddle installation 4300 E-latch & 4591 installation

The Adams Rite MS door prep What will fit into the Adams Rite MS Deadbolts and deadlatches Exit devices

CLASS FEE $25 ARTS ROOM “B” INCLUDES BOXED LUNCH


CLASS ID - WA16AR


Participants will be shown the easiest techniques for cutting and installing an electric strike into a hollow metal door frame. Cutting tool selection and use of the HES metal template kit is demonstrated. Students will be allowed to individually measure and cut in a strike. With instructional and hands-on exercises covering the following subjects:

Electric strike application and selection Fail safe to fail secure conversion of strikes Hands-on installation of electric strikes 12 to 24 volt strike conversion

Frame and door types Installation techniques Safety Using the HES catalog


HANDS-ON TRAINING STUDENTS SHOULD BRING SMALL HAND-TOOLS

CLASS ID - WP15HE

ELECTRIC STRIKE INSTALLATION

HANDS-ON

CLASS FEE $15 ARTS ROOM “B”


WEDNESDAY MAY 13, 2015 1 PM - 3 PM TUKWILA CONFERENCE CENTER 12424 42ND AVE S TUKWILA , WA 98168

ALARM LOCK TRILOGY T2/T3 MANUAL KEYPAD PROGRAMING

WEDNESDAY MAY 13, 2015 1 PM - 5 PM TUKWILA CONFERENCE CENTER 12424 42ND AVE S TUKWILA , WA 981A68

INSTRUCTOR: ANDY PHELPS, ALARM LOCK NATIONAL TRAINING MANAGER

CLASS FEE $25 BANQUET “A” HANDS-ON

HANDS-ON

BEST CYLINDRICAL AND MORTISE LOCKS WEDNESDAY MAY 13, 2015 1 PM - 5 PM TUKWILA CONFERENCE CENTER 12424 42ND AVE S TUKWILA , WA 98168

CLASS FEE $25 ARTS ROOM “A”

This class is for those students who already know how to create a simple master key system and want to learn more advance techniques. We begin with a review of master key methods & the mechanics of master keying. Advanced topics include advanced key symbols, cross keying, selective master keys, positional master keying, decoding an existing system, expanding exhausted systems, & special problems that arrive from specific hardware such as Medeco & other high security locking hardware manufacturers .

INSTRUCTOR: RALPH FORREST-BALL, CML, CAL , ALOA ACE INSTRUCTOR Ralph is the owner of Emerald City Locksmith, a successful lock shop in Eugene, Or. He is a past vice-president of the Pacific Locksmith Association and is a very popular instructor of NW locksmith classes.

MASTER KEY TRAINING - ADVANCED

HANDS-ON

CLASS FEE $75 CLASS ROOM “B” Includes Boxed Lunch

8

THURSDAY MAY 14, 2015 8 AM - 5:00 PM TUKWILA CONFERENCE CENTER 12424 42ND AVE S TUKWILA , WA 98168

In this class one may increase their knowledge and have the opportunity to increase their hands-on experience with BEST 9K and 40H series locks. At the conclusion of this class, students will be fully familiar with Best lock characteristics, features and will recognize the appropriate applications for the product line. Students will learn hands-on techniques for changing handing and lock functions, other common service operations and service tools.

CLASS ID - WP15AL

CLASS ID - WP20BE

Applications, installation, keypad programming, software programming, time zone and holiday scheduling along with tips & tricks on the Trilogy T2 and T3 models. Students will perform hands-on programming using actual mounted units of T2 and T3 push button locks. Alarm Locks intuitive software, DL Windows, will be presented & mini access control systems will be designed using real application scenarios.

NEW CLASS

NEW CLASS

CLASS ID - TH115GT


FIRE AND LIFESAFETY CODE COMPLIANCE - COVERING BOTH

NATIONAL STANDARDS AND LOCAL CODES

THURSDAY MAY 14, 2015 8 AM - NOON TUKWILA CONFERENCE CENTER

12424 42ND AVE S TUKWILA , WA 98168 INSTRUCTOR: BOB KARRER, STANLEY BEST FACTORY TRAINED TRAINING SPECIALIST


9

NOTE: MANDATORY - Students must bring their laptops to class. We will load software and one will follow along for step by step programming instructions. Lap-tops MUST be fully updated with all of the current Microsoft Windows OS and security updates prior to coming to the class.

ALARM LOCK - ADVANCED NETWORX, GATEWAY CONNECTIVITY AND DL WINDOWS v5.2.3 SEQUEL SERVER SOFTWARE TRAINING

THURSDAY MAY 14, 2015 8 AM - 5 PM TUKWILA CONFERENCE CENTER 12424 42ND AVE S TUKWILA , WA 98168

This class is hands-on and will cover all aspects of DL Windows Software programming, including setting up a system with users, time zones, schedules, and running an audit trail for the Networx products. Participants will send/receive programming using our laptops to Networx products. Networx - Global Emergency Commands to issue a “Lockdown” all locks within the system from the PC and/or from any lock within the system as if there were an emergency situation. The Global emergency Commands can also be used to “Unlock” a locks within the system from the PC or any lock within the system.

HANDS-ON

INSTRUCTOR: ANDY PHELPS, ALARM LOCK NATIONAL TRAINING MANAGER

CLASS ID - TH115AL


CLASS ID - THA25BE

Fire, Life Safety & ADA Codes highlight this class that will teach students to understand the process that Architectural Hardware Consultants (AHC) utilize in creating a code compliant Door Hardware Specification 08.71.00. Learn to identify available industry resources, codes & standards that affect door hardware & rec-ognize which opening components are required to comply with these codes. Local hardware specialists will be available to consult on local codes in addition to national standards.

TASTY BOXED LUNCHES FROM THE ‘CURVE’ RESTAURANT ARE PROVIDED WITH EACH FULL DAY CLASS. THESE LUNCHES ARE

CONVENIENTLY SERVED AT THE TCC CLASS FACILITY. HOWEVER, IF YOU ARE REGISTERED FOR A MORNING CLASS AND YOU ARE

REGISTERED FOR AN AFTERNOON CLASS AND WISH TO HAVE ONE OF THE BOXED LUNCHES, PLEASE LET KATIE KNOW.

[email protected] OR CALL YOUR FAVORITE KDL CSR WITH THIS NOTIFICATION 1-800-926-7716. THERE ARE SEVERAL TAKE-

OUT RESTAURANTS NEARBY THAT YOU MAY PREFER OVER A BOXED LUNCH. AGAIN, PLEASE LET KATIE KNOW IF YOU DO NOT

WANT A BOXED LUNCH SO THAT WE MAY PROVIDE THE CURVE CATERING PEOPLE WITH AN ACCURATE HEAD-COUNT . THANK YOU

Class will begin with a brief history of automotive locks featuring early locks systems, security driven innovation, key and lock types, and regular vs higher security locks and keys. We will also take a brief look at the differences between mechanical keys, electronic security systems in keys and ignitions, cloning & programming. Students will learn: Three ways to make a new key from an old key or code tag. Duplicating and cutting to code. Five ways to generate a new key to replace a lost key. Code off lock, reading wafers or pins, impression a key, wafer readers, disassemble and read wafer numbers. Rekeying or replacing vehicle locks. Identifying equipment needed such as wafers, pins, caps and

locks from STRATTEC or ASP. Removing locks from doors, ignitions and trunks. Auto opening tools and techniques. Opening kits, selecting door to open and equipment concerns. Gabe will also provide an overview of working with and servicing motorcycle locks.

THURSDAY MAY 14, 2015 8AM - NOON TUKWILA CONFERENCE CENTER 12424 42ND AVE S TUKWILA , WA 98168

AUTOMOTIVE LOCKSMITH BASICS

HANDS-ON


10


CLASS ID - THA15GT

THIS CLASS IS FOR ENTRY LEVEL LOCKSMITHS

THURSDAY MAY 14, 2015 1 PM - 5 PM TUKWILA CONFERENCE CENTER 12424 42ND AVE S TUKWILA , WA 98168

2015 AUTOMOTIVE UPDATE

HANDS-ON

INSTRUCTOR: VERA LATUS, STRATTEC CUSTOMER SERVICE MANAGER


CLASS ID - THP15SS

The afternoon session of our automotive training will bring you up to date on vehicle platforms that STRATTEC services including GM, FORD, CHRYSLER LLC. The GM and FORD sections will Include hands on pinning of select new side mill ignitions and free wheeling door locks including the 2015 GM Pick-up ignition and door locks. Technology changes regarding locks and keys will be covered including trends and future applications from the “Big 3”. Students will also be updated specifically on what is serviced by STRATTEC for the 2015+ model year vehicles. STRATTEC on-line resources will be covered, as well.

THURSDAY MAY 14, 2015 1 PM - 5 PM TUKWILA CONFERENCE CENTER 12424 42ND AVE S TUKWILA , WA 98168

ADA, AMERICANS W/DISABILITIES ACT, THE FUNDAMENTALS


CLASS FEE $25 ARTS ROOM “A”

CLASS ID - THP25BE

Accessibility requirements as they relate to the total door opening as defined by the 2010 Americans

w/ Disabilities Act are examined in this class. At class conclusion, students will be fully versed in ADA

code compliance, ICC/ANSI, A117.1, ADAAG, ADA & locally adopted code requirements.

NWLA LOCKSMITH CERTIFICATION

FRIDAY MAY 15, 2015 8 AM - 5 PM TUKWILA CONFERENCE CENTER 12424 42ND AVE S TUKWILA, WA 98168

AM: Frank will work with the students to prepare for the afternoon testing. PM: Testing will take place. With this certification a locksmith earns the right to be a voting member of the NWLA and may also be allowed to be a participating member of the NWLA Board. The test is of basic locksmith skills: automotive, master keying, safes, deposit boxes, life safety and general locksmithing. The test is administered in two parts - one part is hands on and one part is given in written form.

Students who complete and pass the test will receive a certificate and NWLA certification plaque .

INSTRUCTOR: FRANK LONERGAN, CML, CMS, CSP ALOA ACE INSTRUCTOR

CLASS FEE $75 BANQUET “A” Includes Boxed Lunch

HANDS-ON

Go to www.kdlhardware.com select Sign Up For the Trade Show and Classes from the main menu, complete the registration form and click “Register”. For further information call

your favorite KDL CSR or Katie at 800-926-7716 extension 100

11

CLASS ID - F115NWLA

CAM/CABINET LOCK SERVICING

FRIDAY MAY 15, 2015 8 AM - 5:00 PM TUKWILA CONFERENCE CENTER 12424 42ND AVE S TUKWILA , WA 98168

Everything from tubular cam locks to wafer tumbler mailbox locks to pin tumbler cabinet locks will be cov-

ered. Students will learn how to fit keys, disassemble locks, rekey, & disable several types of cam locks.

Techniques for fitting keys will include keys by code & by using an otoscope.

STUDENTS SHOULD BRING SMALL HAND TOOLS.

INSTRUCTOR: RALPH FORREST-BALL, CML, CAL , ALOA ACE INSTRUCTOR - Ralph is the owner of Emerald City Locksmith, a successful lock shop in Eugene, Or. He is a past vice-president of the Pacific Locksmith Association & is a popular NW instructor .

HANDS-ON

CLASS FEE $75 CLASSROOM “B” Includes Boxed Lunch

CLASS ID - F115GT


CHASING THE SPARK - ELECTRONIC LOCK SERVICING

This class will cover basic troubleshooting and how to use the basic testing tools in troubleshooting

electronic systems of today. Access control and CCTV will be covered. This class will teach you how to

break down even the most complicated systems to the simplest forms for easy diagnosis.

FRIDAY MAY 15, 2014 8 AM - 5 PM

TUKWILA CONFERENCE CENTER 12424 42ND AVE S TUKWILA , WA 98168 HANDS-ON


CLASS ID - F120GT

KABA ILCO TRANSPONDER TRAINING

12

LOCK INSTALLATIONS FEATURING DON-JO DOOR PLATES, LATCHGUARDS & STRIKES


TUKWILA CONFERENCE CENTER 12424 42ND AVE S TUKWILA , WA 98168

This class features hands-on drilling of doors to install locks. Students will complete fresh installs, re-bore undersized holes and work with misaligned holes. Individuals will be taught how to correctly install a Don-Jo wrap-around plate . Gabe will demonstrate assorted other Don-Jo products utilized in troubleshooting poorly executed installations. BYOT (BRING YOUR OWN TOOLS) Students are encouraged to bring their own tools to class, including:

HANDS-ON

DRILL 2 1/8” HOLE SAW 1” HOLE SAW

HAMMER 3/4” CHISEL PHILLIPS AND FLAT BLADE SCEW-DRIVERS


CLASS ID - F116GT

CLASS ID - F125IL

NEW CLASS

HANDS-ON CLASS FEE $50 ARTS ROOM “A” Includes Boxed Lunch



Transponder Tools w/ Tony Presidio. Introduction to the features & benefits of TcodePro & MVP Pro w/ tips & tricks to use them effectively. Latest software & accessories will be presented. After lunch, Joy Skowron, will teach Ilco automotive transponder technology. Joy Skowron is a long-time friend of KDL and of NW area locksmiths. We are thrilled to have her back. Her classes are always fun and filled with information, tips and tricks. Joy will also discuss the attributes of the Sidewinder key duplicator. Due to Joy’s popularity & the interesting subject matter, this class will fill quickly. Be certain to get registered today.


Instructors: Tony Presidio, Advanced Diagnostics, Joy Skowron Automotive Channel Specialist

CLASS ID - FA15SC

NEW CLASS


FRIDAY MAY 15, 2014 8 AM - NOON


INSTRUCTORS: JOHN DALRYMPLE, FACTORY TECHNICAL PRODUCTS INSTRUCTOR WITH CHRIS RINGER ALLEGION DISTRIBUTOR SALES CONSULTANT

NDE WIRELESS WITH ENGAGE TECHNOLOGY

Schlage's new wireless NDE lock features Engage technolog that simplifies transitioning from the mechanical key to electronic credentials and makes it more affordable than ever to integrate into interior commercial applications. Come learn how to install & manage this all new product from Schlage. Topics covered: Lock installation, Installation of Engage mobile application, connecting the NDE to a local wireless network, and managing the lock via the mobile application & web portal.

EACH STUDENT WILL

TAKE HOME A NEW

NDE LOCK AT

NO CHARGE !!!

RETAIL $729

HANDS-ON

HANDS-ON

CLASS ID - SA30GT INVENTORY MANAGEMENT

INSTRUCTOR: ADAM MUNSON, KDL CSR AND WAREHOUSE/INVENTORY CONTROL MANAGER

SATURDAY MAY 16, 2015 8 AM - 10 AM TUKWILA CONFERENCE CENTER 12424 42ND AVE S TUKWILA, WA 98168

Importance of Inventory Control What is Point of Sale Supervision of supply, storage and accessibility of items to insure adequate supply without excessive oversupply

Inventory orders Stock maintenance Minimize profit loss Count methods Importance of POS software

NO CHARGE CLASSROOM “A”

CLASS ID - SA30OL OLYMPUS CABINET LOCKS

At Olympus we manufacture our locks to be easily serviced in the field by the locksmith technician or facilities maintenance team. In addition to our small pin products on Ntl D4291/D4292 and CCL R1 key-ways, we also offer a selection of cabinet locks to key into common keyways such as Corbin Russwin, Best, Medeco, Yale and Schlage keyways. The focus of this class will be to get hands-on experience in the assembly, dis-assembly, and pinning of locks. Additional focus will include information on our prod-uct families, new locks, keyways offered, and the main features and benefits of our locks. Giveaways.

INSTRUCTOR: PAT MULCAHY, MASTER LOCK COMPANY, NATIONAL SALES MANAGER

13

SATURDAY MAY 16, 2015 8 AM - 10 AM


NO CHARGE ARTS ROOM “B”

CLASS ID - FP15SC

NEW CLASS

HANDS-ON CLASS FEE $25 ARTS ROOM “A”

FRIDAY MAY 15, 2014 8 AM - NOON


INSTRUCTORS: SCOTT JONES, FACTORY TECHNICAL PRODUCTS INSTRUCTOR. WITH CHRIS RINGER ALLEGION DISTRIBUTOR SALES CONSULTANT

LCN DOOR CLOSERS & VON DUPRIN EXITS

A wealth of information will be covered on exit devices and door closers including types, functions, ratings, options, installations, repairs and servicing.

CLASS ID - SA30ML MASTER LOCK DOOR HARDWARE

Introduction to Master Lock door hardware. Hands-on workshop trouble-

shooting hardware and installation applications. Learn designs, functions,

finishes and available keyways. Students will leave the classroom with lots

of free products and display materials.

INSTRUCTOR: ADAM NELSON, OLYMPUS CUSTOMER SERVICE MANAGER

SATURDAY MAY 16, 2015 8 AM - 10 AM


NO CHARGE ARTS ROOM “A”

Voice

800-926-7716

Fax

800-524-9305

850 Poplar Place South, Seattle, WA 98144 PO BOX 24746, Seattle, WA 98124


Trade Show Registration

Date ______________________________ Company Name ____________________________________________________________________________________ Business Mailing Address _______________________________________________________________________ Phone ___________________________________ eMail (for confirmation) _________________________________________________________________________ Full Names of those individuals attending the Trade Show Guest #1 ____________________________________________________________________________________ Guest #2 ____________________________________________________________________________________ Guest #3 ____________________________________________________________________________________ Guest #4 ____________________________________________________________________________________ Guest #5 ____________________________________________________________________________________ Guest #6 ____________________________________________________________________________________

KDL Hardware Supply Annual Spring Trade Show Tukwila Community Center

12424 42nd Ave S Tukwila, WA 98168

For further information email [email protected]

Or call 1-800-926-7716 Extension 100 FAX 1-800-524-9305

If you do not intend to enroll in any of the 2015 classes but you will be coming to the Saturday May 16, 2015 Trade Show, please be sure to register in advance. One

may easily register online at www.kdlhardware.com. However, completing the this simple form and faxing it to Katie at 1-800-524-9305 is also an option.

14

Register For Classes Thursday May 7, 2015 and Friday May 8, 2015

(8am - 5pm) Safe Cracking ) This is a Two Day Course $200

Monday May 11, 2015 and Tuesday May 12, 2015

(8am - 4pm) Fundamental Locksmith Skills This is a Two Day Course $400

Monday May 11, 2015

(8am - 4pm) Bank Deposit Lock Servicing $75

(8am - Noon) How to Conduct a Successful Site Survey $25

(1pm - 3pm) State of the Art Smart Product Applications $15

Tuesday May 12, 2015

(8am - 5pm) Medeco Certification $75

(8am - 4pm) How to Impression Keys For Locks $75

(8am - Noon) HES Basic Low Voltage Electricity $25

(1pm - 5pm) HES Advanced Electrical Systems $25

Wednesday May 13, 2015

(8am - 5pm) Master Keying Intermediate $75

(8am - 4pm) Lock Picking $75

(8am - Noon) Best I/C Core Combinating Workshop $25

(8am - Noon) Adams Rite Storefront, Mechanical to Electrical Upgrade $25

(1pm - 3pm) Hands on Installations of HES Electric Strikes $15

(1pm - 5pm) Servicing Best Cylindrical and Mortise Locks $25

(1pm - 5pm) Alarm Lock Trilogy T2/T3 Manual Keypad Programming $25

Thursday May 14, 2015

(8am - 5pm) Master Keying Advanced $75

(8am - 5pm) Alarm Lock Advanced Networx, Gateway & Software $75

(8am - Noon) Code Compliance - National and Local Codes $25

(8am - Noon) Basic Automotive Locks (Beginners Level) $50

(1pm - 5pm) Strattec 2015 Automotive Update $25

(1pm - 5pm) ADA, Americans w/ Disabilities Act - The Fundamentals $25

Friday May 15, 2015

(8am - 5pm) NWLA Locksmith Certification $75

(8am - 5pm) Cam/Cabinet Lock Servicing $75

(8am - 5pm) Chasing the Spark $75

(8am - 4pm) Cylindrical Lock Installations $75

(9am - 5pm) Advanced Diagnostics Automotive Key Programming

And Kaba Ilco Transponder Training with Joy Skowron $50

(8am - Noon) Allegion NDE Wireless Lock w/ Engage Technology $25

(1pm - 4pm) LCN Closers & Von Duprin Exit Devices $25

Saturday May 16

(8am - 10am) Master Lock Door Hardware NO CHARGE TRAINING

(8am - 10am) Olympus Cabinet Locks NO CHARGE TRAINING

(8am - 10am) Inventory Management NO CHARGE TRAINING

WE LOOK FORWARD TO SEEING YOU AT THE TRADE SHOW. NO CHARGE TO ATTEND (WHEN PRE-REGISTERED) LOTS OF GREAT PRIZES FUN GAMES & CONTESTS OVER 50 FACTORIES TERRIFIC FREE BBQ LUNCH

COMPANY NAME: STUDENT’S FULL NAME:

(PRINT CLEARLY - THIS IS THE NAME THAT WILL BE SHOWN ON YOUR CLASS CERTIFICATE)

TRADE SHOW ACCOUNT NUMBER: STUDENT’S PHONE # COMPANY ADDRESS: CITY STATE ZIP EMAIL (FOR CONFIRMATION): METHOD OF PAYMENT:

BAC PO ACCOUNT

ATTENDING TRADE SHOW 5/16/15? Y N

TOTAL FEES FOR CLASSES:

$

FAX: 800-524-9305 eMail: [email protected]

Enroll at www.kdlhardware.com “Sign Up for the Trade Show & Classes”

AND RECEIVE ONE ADDITIONAL SPIN OF THE WHEEL AT THE TRADE SHOW AND

ONE ADDITIONAL ENTRY INTO THE GRAND PRIZE DRAWING 5/16!

022615


TREMENDOUS

SHOW SPECIALS

AND BARGAINS

FANTASTIC DOOR PRIZES

FREE LUNCH

WITH ADVANCE

REGISTRATION

OVER 50

FACTORIES

REPRESENTED

PASSPORT

TO

PRIZES

K-D-L Hardware Supply P.O. Box 24746

Seattle, WA 98124

PRSRT STD

U.S. POSTAGE PAID #5544

SEATTLE, WA

VOLUME 32, NUMBER 2015

Some merchandise may be limited to stock on hand. Within the

Continental U.S Freight is prepaid on $300.00 orders from west

of the Mississippi River and on $600.00 orders from east of

same. N o t r e s p o n s i b l e f o r t y p o g r a p h i c a l e r r o r s .

32nd Annual Spring Trade Show

Saturday May 16, 2015 11 am - 3 pm Email your show registration and classes registration form

To [email protected] today.

Or You May Fax 800-524-9305

Documents

Locksmith Education and 32nd Annual KDL Spring Trade …catalog.kdllink.com/PDF/2015 Trade Show Flyer PUBtoPDF.pdf · The objective of this class is to teach students how to make