Upload
others
View
2
Download
1
Embed Size (px)
Citation preview
www.signetlocks.co.uk LOCKS & HARDWARE FOR METAL GATES 2015/16
[email protected] 552066
‘Lock’ head
ing‘Lo
ck’ heading
1
www.signetlocks.co.uk LOCKS & HARDWARE FOR METAL GATES 2015/16
[email protected] 552066
3
Contents
Locks1. Bolt-on Locks 04
2. Weld-in Locks 06
3. Digital Locks 08
4. ScrewfixedLocks 11
5. Handles 13
6. Mortise Locks 14
7. Sliding gate Locks 15
8. Fire Brigade Locks 15
9. Eurocylinders 16
10. Padlocks 16
Gate Closers
11. Buffers 17
12. Gate Closers 18
13. Closing Hinges 20
Hinges
14. Hinges 21
Panic Hardware
15. Panic Hardware 27
Electric Gate Hardware
16. Electric Gate Hardware 28
Gate Hardware
17. Gate Hardware 31
Sliding Gate Hardware18. Cantilever Gate Kits 35
19. Gate Wheels & Track 35
20. Overhead Track System 37
www.signetlocks.co.uk
01243 552066
www.signetlocks.co.uk
01243 552066
‘Lock’ head
ing
‘Lock’ head
ingLOCKS & HARDWARE FOR METAL GATES 2015/16 www.signetlocks.co.uk [email protected] 01243 552066
4
Locks
www.signetlocks.co.uk LOCKS & HARDWARE FOR METAL GATES 2015/16
[email protected] 552066
Locks
5
1. Bolt-on Locks Bolt-on Locks .1
GATEMASTER Select Pro bolt-on gatelocksA quality range of gatelocks designed and built in the UK. Available in two sizes, code 01 to fit 10mm to 30mm gate frames and code 02 to fit 40mm to 60mm gate frames
• Can be used on left or right hand gates
• Adjustable deadbolt (up to 27mm adjustment) for precise fitting on site
• 1 piece machined stainless steel locking bolt
• Only requires 3 holes to be drilled in the gate frame
• Brushed finish stainless steel bolt support plate with brass bearing. Reduces friction, wear and increases product life
One lockA robust, easy to fit lock for use on metal or wooden gates. The lock couples easy access with deadlocking for security. Pull bolt across to hold gate closed and use key to deadlock for security, more convenient than using a padlock
5 lever locking mechanism supplied with keep plate, fixing bolts and security nuts
Lock size 154 x 130 x 36mm
77mm throw deadbolt OL1000
New Product
Bolt on latch deadlockStainless steel latchbolt springs 13mm into the gate post and is retracted using the handles. Turning the key shoots the bolt 30mm and deadlocks it for added security. The latchbolt is adjustable in length for precise fitting on site. This lock is supplied with a bolt guide plate and gate post strike plate
10 – 30mm SBLD1601
40 – 60mm SBLD1602
New Product
Bolt on deadlockA very convenient, easy to use long throw deadlock for every application. Gone is the hassle of removing a padlock, gone is the hassle of fabricating a slide bolt. Simply turning the key, throws the stainless steel deadbolt 30mm
10 – 30mm SBD1601
40 – 60mm SBD1602
New Product
Digital gatelockDigital gatelocks have been developed to meet the demand for keyless entry through gates. This marine grade Digital Gatelock has many unique features
See page 8 for details
LocinoxlockThis popular lock is available in 2 designs – Industrial design and Ornamental design
• Supplied with handles • Supplied with 4 pin double sided eurocylinder• Available in sizes to fit 10mm flat bar to 60mm box section• 25mm deadbolt movement • Adjustable latchbolt and deadbolt – 18mm of adjustment
Locinox lock – industrial design, 10mm – 30mm LOC 1030
Locinox lock – industrial design, 30mm – 50mm LOC 3050
Locinox lock – industrial design, 40mm – 60mm LOC 4060
Locinox lock – ornamental design, 10mm – 30mm LOCO 1030
Locinox lock – ornamental design, 30mm – 50mm LOCO 3050
Locinox lock – ornamental design, 40mm – 60mm LOCO 4060
Slotted backplateFor use when securing double gates OL1001
Angle bracketfor use when fixing lock to gates made from flat bar OL1002
Collar toolLocinox Collar Tool
LOCT
LocinoxkeepUsed with the Locinox lock, also acts as a gate stop LOC K
LocinoxgatelockLocinox Gatelock 2 collar fixing 10mm LOC 2C 10
Locinox Gatelock 2 collar fixing 30 – 50mm LOC 2C 3050
QuickexitlockThis quick exit gate lock is designed to allow rapid exit through gates. Designed specifically for metal gates, the unit is simple to install yet robust. The unit will automatically latch shut when the gate is closed. There are two options available on this lock, with either a digital keypad access or keyed access on the outside. These locks come in left hand and right hand. Right hand lock shown
Digital keypad on one side
10mm – 30mm Left hand SQED1601LH
10mm – 30mm Right hand SQED1601RH
40mm – 60mm Left hand SQED1602LH
40mm – 60mm Right hand SQED1602RH
Key access on one side
10mm – 30mm Left hand SQEL1601LH
10mm – 30mm Right hand SQEL1601RH
40mm – 60mm Left hand SQEL1602LH
40mm – 60mm Right hand SQEL1602RH
New Product
Bolt on keylatchThe Select Pro keylatch is perfect for securing the gate every time it is closed. When the gate is closed the lock latches shut and can only be opened with a key. This has proven very popular for use on communal, school and alley gates.
10 – 30mm SBKLLT1601
40 – 60mm SBKLLT1602
New Product
Bolt on latchA very simple bolt on latch, compatible with the Select Pro range. Holds the gate shut and is released using the handles. With no locking facility this latch is perfect for just holding a gate shut, and is commonly used on housing developments and playgrounds
10 – 30mm SBL1601
40 – 60mm SBL1602
New Product
• Designed for heavy use gates
• Deadbolt has 30mm bolt throw for added security
• Square case, easily incorporated into gate design • 1000 hours salt spray tested
• 5 pin eurocylinder for added security
• 3 handle types available, AH, OK
and TDH. See page 13 for details
LOCKS & HARDWARE FOR METAL GATES 2015/16 www.signetlocks.co.uk [email protected] 01243 552066
6
Locks
www.signetlocks.co.uk LOCKS & HARDWARE FOR METAL GATES 2015/16
[email protected] 552066
Locks
7
2. Weld-in Locks Weld-in Locks .2
GATEMASTER Select Pro weld-in gatelocks
A quality range of gatelocks designed and built in the UK
• Stainless steel deadbolt which moves 30mm with one turn of the key• Bolt is adjustable in length for precise fitting on site• Lock case is made from 2.5mm steel• Available in 4 widths to suit different box section sizes New Product
Weld-in deadlockA very convenient, easy to use, long throw deadlock for every application. Simply turning the key, throws the stainless steel deadbolt 30mm
Lockcase width
30mm SWD1630
40mm SWD1640
50mm SWD1650
60mm SWD1660
Weld-in latch deadlockStainless steel latchbolt springs 13mm into the gate post and is retracted using the handles. Turning the key shoots the bolt 30mm and deadlocks it for added security
Lockcase width
30mm SWLD1630
40mm SWLD1640
50mm SWLD1650
60mm SWLD1660
Weld-in latchHolds the gate shut and is released using the handles. With no locking facility this latch is perfect for just holding a gate shut
Lockcase width
30mm SWL1630
40mm SWL1640
50mm SWL1650
60mm SWL1660
GATEMASTER high security deadlock Kit Lock size 140 x 115 x 31mm
This deadlock kit is ideal for use on double gates or for extra security on single gates. The lockplate, keepset and deadlock are fitted to one gate and the keep plate welded to the other. In use, the keep plate is captured in the slot by the deadlock and prevents the gates being forced apart
5GK
GATEMASTER10Kextraheavy duty gate lockThis heavy gate lock is designed to provide maximum protection and security. The base plate is welded on to the gate and the lock is assembled onto it after galvanising using an ingenious fixing system which is inaccessible when the gate is locked. Ideal for securing single and double gates
Lock size – 250 x 160 x 55mm
10K
Bullet lock & housingThe removable locking pin secures itself within the weldable housing
BLAlso available Keyed Alike
Weldable Strike Plate For use with GLD locks
GLD P
MildsteelboxWeldable mild steel box for stainless steel gatelock—60 x 40 x 219mm
HYBB
GATEMASTER double throw latch deadlockA traditional latch deadlock, for use when handles are required. Perfect for use in traditional wrought iron gate designs, the case is welded into the gate frame. After the gate has been galvanised and painted the lock mechanism is easily installed into the case
• Suitable for left or right hand gates• Deadbolt throws 24mm with two turns of the key• 4 different case widths available• Also available keyed alike or in Fire Brigade version to accept FB1 & FB2 key.• 5 pin eurocylinder included• Accepts standard handle designs Available in 4 widths
GATEMASTER double throw latch deadlock, 30mm GLD 30
GATEMASTER double throw latch deadlock, 40mm GLD 40
GATEMASTER double throw latch deadlock, 50mm GLD 50
GATEMASTER double throw latch deadlock, 60mm GLD 60
Order handles separately, see page 13
Stainless steel lockcaseGATEMASTER double throw latch deadlock with stainless steel case, 30mm case width GLDS 30
GATEMASTER double throw latch deadlock with stainless steel case, 40mm case width GLDS 40
Order handles separately, see page 13
Weld in lock with vertical boltsWeld in lock with 2 vertical bolts for increased security, 40mm width lockcase
GLD 40 2XVB
Vertical bolts are assembled using standard M10 studding – order separately
Stainless steel gatelock All stainless steel construction with a deadlocking hook bolt which throws 33mm
HYB
Stainless steel handleStainless steel Handle set to suit stainless steel gatelock
HYBH
GATEMASTER double throw deadlockThis Gatemaster deadlock is simply welded into the gate, and has proved to be extremely reliable. Available in 5 different widths to suit your application, the deadlock will blend into any gate design
• 24mm double throw movement• 5 pin eurocylinder included• Cost effective method of introducing a reliable locking system • Also available keyed alike or in Fire Brigade version to accept FB1 & FB2 keys• Case designed to be galvanised/painted Available in 5 widths
GATEMASTER double throw deadlock, 25mm GD 25
GATEMASTER double throw deadlock, 30mm GD 30
GATEMASTER double throw deadlock, 40mm GD 40
GATEMASTER double throw deadlock, 50mm GD 50
GATEMASTER double throw deadlock, 60mm GD 60
Weld-in deadlocking latchThis latch provides convenient security on communal or high usage gates. The latchbolt automatically deadlocks when the gate is shut, preventing the latch being pushed back
Left hand version shown
Available in 4 widths
Deadlocking latch – 30mm LH GDL30L
Deadlocking latch – 30mm RH GDL30R
Deadlocking latch – 40mm LH GDL40L
Deadlocking latch – 40mm RH GDL40R
Deadlocking latch – 50mm LH GDL50L
Deadlocking latch – 50mm RH GDL50R
Deadlocking latch – 60mm LH GDL60L
Deadlocking latch – 60mm RH GDL60R
Weld-in keylatchThe Select Pro keylatch is perfect for securing the gate every time you shut it behind you. When the gate is closed the lock latches shut and can only be opened with a key
Lockcase width
30mm SWKLLT1630
40mm SWKLLT1640
50mm SWKLLT1650
60mm SWKLLT1660
LOCKS & HARDWARE FOR METAL GATES 2015/16 www.signetlocks.co.uk [email protected] 01243 552066
8
Locks
www.signetlocks.co.uk LOCKS & HARDWARE FOR METAL GATES 2015/16
[email protected] 552066
Locks
9
3. Digital Locks Digital Locks .3
GATEMASTER Digital GatelockDigital gatelocks have been developed to meet the demandfor keyless entry through gates. This marine grade Digital Gatelock has many unique features.
Deadlocking – punch in the code, turn the handle and the stainless steel latch bolt moves forward 30mm anddeadlocks, especially useful on double gates.
Auto-latching – close the gate and the latchbolt latches into the gate frame. To open the gate, enter the code and turn the handle.
No power needed – High quality digital keypads ensure long lasting durability. Perfect for single and double gates.
• Marine grade keypads ensure long lasting durability• Latchbolt moves 13mm and can be deadlocked another 30mm• Brushed finish stainless steel bolt support plate with brass bearing. Reduces friction, wear and increases product life.
Marine grade bolt on digital gatelockThis digital gatelock is straightforward to use, and designed to function fitted to a metal gate in a marine environment. The auto-latching design means that you can be assured your gate will latch shut behind you.
• To suit 40 – 60mm gate frames• 14 digit keypads• Marine grade – salt water tested• 1 year guarantee• 20mm latching movement
All locks also available with lever handles – easier to operate.
Gatemaster single keypad lockLeft hand lock shown
To suit 10 - 30mm, Left hand DGLS01L
To suit 10 - 30mm, Right hand DGLS01R
To suit 40 - 60mm, Left hand DGLS02L
To suit 40 - 60mm, Right hand DGLS02R
Marine grade single keypad lock and handleLeft hand lock shown
Left hand MGS-L
Right hand MGS-R
Gatemaster double keypadlock
To suit 10 - 30mm DGL01
To suit 40 - 60mm DGL02
Marine grade doublekeypad lockRight hand lock shown
Left hand MGD-L
Right hand MGD-R
Keypad on both sides
Marine grade keypad lockwith key overrideLeft hand lock shown
Double keypad
Left hand MGDK-L
Right hand MGDK-R
Single keypad and handle
Left hand MGSK-L
Right hand MGSK-R
LOCKS & HARDWARE FOR METAL GATES 2015/16 www.signetlocks.co.uk [email protected] 01243 552066
10
Locks
www.signetlocks.co.uk LOCKS & HARDWARE FOR METAL GATES 2015/16
[email protected] 552066
Locks
11
3. Digital Locks Screwfixedlocks.4
GATEMASTER weldable steel lock cases for digital locksConvenient and cost effective, these lock cases are fully prepared for receiving 14 button keypads – simply weld the lock case into the gate and fit the digital lock after painting/galvanising. 2 types of lock case are available, digital lock case and digital lock case with security keep, each type available in a choice of 3 widths
Order digital keypads separately
Digital lock case, 30mm width DLC 30
Digital lock case, 40mm width DLC 40
Digital lock case, 50mm width DLC 50
GATEMASTER Digital lock case with security keepDesigned for extra security on single gates andfor use on double gates. The keep plate is captured between the lockcase and the security keep and prevents the gates being forced apart.
Order digital keypads separately
Digital lock case with security keep30mm width DLCK 30
Digital lock case with security keep40mm width DLCK 40
Digital lock case with security keep50mm width DLCK 50
Standard duty double throw deadlock and strike plateA compact lock which can be screw fixed into a steel fabrication. 95mm x 82mm x 17mmAvailable in electro galvanised finish or in stainless steel
Standard duty double throw deadlock, Electro galvanised SDL
Standard duty double throw deadlock, Stainless steel SDLS
Gatemaster locking boltA robust locking bolt for surface fitting to metal or wooden gates. This lock is unique as it has a strong steel deadbolt that throws 53mm with one turn of the key
• Key both sides• 53mm throw• Electro-galvanised finish • Suitable for left or right hand gates• A rang of fixing plates available – see list below
GATEMASTER locking bolt80mm x 80mm x 17mm GLB
Heavy duty double throw deadlockThis lock has an exceptionally large deadbolt measuring 48mm x 10mm which throws 25mm. 105mm x 105mm x 23mm
Right hand lock shown
Heavy duty double throw deadlock, Left hand DTL
Heavy duty double throw deadlock, Right hand DTR
GATEMASTER locking bolt withextendedeurocylinderThis version has a eurocylinder which projects 56mm from the back of the lock. Used for fixing to timber gates or through metal box section gate frames
GLB02
Heavy duty digital keypadDesigned for high volume use. This digital keypad has an integral handle for ease of operation. Supplied with tubular dead locking latch
Heavy duty single keypad and rear handle HDSK
Heavy duty double keypad HDDK
Marine grade version of above keypads.Ideal for exposed locations
Heavy duty single keypad and rear handle Marine grade HDSK MG
Heavy duty double keypad Marine grade HDDK MG
Latch lock – Latch version of above deadlockSlam the gate to secure shut and use the key to open. Keyed both sides
Right hand lock shown
Bolt on latch LH GLBL LH
Bolt on latch RH GLBL RH
14 button double keypadAccess through the gate from either side using code. Supplied with tubular dead locking latch
Available in two finishes
14 button double keypad, Satin Chrome DK
14 button double keypad, Black DKB
Mechanical Digital LockThis popular lock is opened by keying a 5 digit code on the 14 button keypad. Code can be reset by owner. Supplied with tubular deadlocking latch
Available in two finishes
14 button Single keypad and rear handle – with hold back facility, Satin Chrome SK
14 button Single keypad and rear handle, Black SKB
Single Keypad with rim deadlock
SKR
Marine grade mechanical digital lockThese 14 button keypads are produced using materials suitable for use in exposed and marine locations. Supplied with tubular deadlocking latch
Available in two versions
Marine grade single keypad – with rear handle SKM
Marine grade double keypad DKM
GATEMASTER Rear handle shroudRestricts access to the handle from outside
Right hand version shown
Rear handle shroud, left hand SKHSL
Rear handle shroud, right hand SKHSR
Electrogalvanised plates to suit the GATEMASTER locking bolt
Slotted screw fixed lock plate
GLB ST
Screw fixed keep plate
GLB KT
Screw fixed escutcheon
GLB ET
Weld-in lock plates to suit the GATEMASTER locking boltStandard lock plate – used for single gates, supplied with lock fixing screws
GLB P
Used for securing double gates. A keep plate is welded to the second gate so that it passes through the slot in the lockplate and is secured with the deadbolt. This ensures the gates can not be ‘sprung’ open
Also used for extra security on single gates
GLB S
4mm thick steel keep plate
GLB K
LOCKS & HARDWARE FOR METAL GATES 2015/16 www.signetlocks.co.uk [email protected] 01243 552066
12
Locks
www.signetlocks.co.uk LOCKS & HARDWARE FOR METAL GATES 2015/16
[email protected] 552066
Locks
Locks
13
4.Screwfixedlocks Handles .5
Heavy duty deadlockA very useful deadlock, brass deadbolt moves 20mm with one turn of the key. 17 x 75 x 85mm. Electrogalvanised
HDD
Camlock for triangular keyCamlock for triangular key
CLT
Magnet action catchIdeal for securing gates, the permanent magnet draws the latch across as the gate closes ensuring the gate is secured every time
MAC
Budget lockscrew fix or weld, electrogalvanised
BL
Budget lock keyBudget lock key
BLK
Magnet action safety lockThis magnet action latch is opened by pulling the knob on the top. This is out of reach of small children. Its special design means that no latching force is required, ensuring that the gate latches shut reliably every time. The knob can be locked using the key
MSL
Rod LocksThis lock uses a Tee key to operate 2 rods which extend up and down into the frame of the gate or door
2 way Rod Lock RL
Tee key for above Rod lock TKRL
Triangular keyTriangular key for camlock
CLT KEY
Camlock A useful lock for fitting to small fabricated doors. Also availalable keyed alike
CL
Push pin lock Also available keyed alike
PPL
Mini camlock 8mm long thread & 30mm cam. Also available keyed alike
CMINI
Pull handle230mm long. Black paint finish
Other sizes availablePH2
Weldable handle boss setEnables the metalworker to produce unique handles to suit the design of the gate
SB
Single sided 8mm square barFor use when fitting a handle to one side of a lock only
SS8Stainless steel pull handle300mm x 19mm Back to Back
PH 300 BB SS
Tubular steel handleTubular steel handle, 180mm
TSH 180
Traditional handle set Lock handle
TDH
Alloy handle setLock handle
AH
Child safety handleLock handle
CPH
Stainless steel handle set Stainless steel handle set
SSH
Octagon knob setLock handle
OK
Twisted handle set Lock handle
TH
LOCKS & HARDWARE FOR METAL GATES 2015/16 www.signetlocks.co.uk [email protected] 01243 552066
14
Locks
www.signetlocks.co.uk LOCKS & HARDWARE FOR METAL GATES 2015/16
[email protected] 552066
Locks
Locks
15
6. Mortise locks Sliding gate locks .7
Fire brigade locks .8
GATEMASTER Hook lock and digital lock kitThis kit comprises a hook lock, a pair of digital keypads and a weldable steel case. Used on sliding gates which need to be latched shut for security. Also keyed both sides for deadlocking the hook
Available in 3 widths
Hook lock and digital lock kit, 30mm width HLDK 30
Hook lock and digital lock kit, 40mm width HLDK 40
Hook lock and digital lock kit, 50mm width HLDK 50
Single sided version—keypad one side, handle the other side
Hook lock and single digital lock kit, 30mm width HLSK 30
Hook lock and single digital lock kit, 40mm width HLSK 40
Hook lock and single digital lock kit, 50mm width HLSK 50
Narrow hook lock Heavy hookbolt projects 24mm when locked, can be used on hinged gates where the hook can be used to locate into the gate post to prevent the gate being forced open
Also used for sliding gates NHL
Narrow auto deadlocking latchThe latch deadlocks automatically on shutting the gate. This prevents access by pushing back the latch. Used with a gate closer, this deadlocking latch is ideal for communal gates which need to be automatically locked whenever the gate is closed
NAL
Narrow latch deadlock Narrow latch deadlock NLD
Order handles seperatly
Narrow deadlock Heavy deadbolt projects 34mm when locked
ND
Quality 5 lever sashlock with brass forend
Conforms to BS3621 – deadboltmoves 20mm 5SL
Also available Keyed Alike 5SL KA
GATEMASTER steel case for 5 lever sashlock 30mm – 165 x 85 x 31mm 5SLC
High security insurance deadlock
5 lever, conforms to BS3621, deadbolt moves 20 mm 5CD
Also available Keyed Alike 5CD KA
GATEMASTER steel case for high security deadlock – 140 x 85 x 31mm 5CDC
Double throw deadlockDeadbolt projects 35mm unlocked and 60mm double locked. Galvanised case and unplated steel deadbolt. Supplied with double sided eurocylinder
CD
Double throw latch deadlockSimilar to the above deadlock this gate latch deadlock has a spring loaded unplated latch bolt which moves forward and deadlocks when the key is turned. Supplied with a double sided eurocylinder
CLD
Order handles separately
Quality 5 lever deadlock with brass forend
Conforms to BS3621 deadbolt moves 20mm 5DL
Also available Keyed Alike 5DL KA
GATEMASTER steel case for 5 lever deadlock – 130 x 85 x 31mm 5DLC
Hook lock for sliding gatesThis substantial hook lock is excellent value. The locating pin prevents the gate being released by lifting
Supplied with eurocylinder and keep plate
HL
HooklockboxWeldable box in zinc finish steel. Available in 2 sizes for fitting to 40mm and 50mm box section. The hook lock is fitted in a slot in the 40mm or 50mm box gate frame and the lock box is welded onto the back of the gate frame
Hook lock box for 40mm gate frames HLB40
Hook lock box for 50mm gate frames HLB50
Narrow LocksNarrow locks for fitting into box section gate frames – minimum size box 40 x 40mm
Slam locks
FB4 Slam lock LH open in SL FB4 LH OI
FB4 Slam lock RH open in SL FB4 RH OI
FB4 Slam lock LH open out SL FB4 LH OO
FB4 Slam lock RH open out SL FB4 RH OO
Rim deadlock
FB1 Rim deadlock LH RD FB1 LH
FB1 Rim deadlock RH RD FB1 RH
FB2 Rim deadlock LH RD FB2 LH
FB2 Rim deadlock RH RD FB2 RH
Mortise deadlock
FB1 Mortise deadlock MD FB1
FB2 Mortise deadlock MD FB2
Galvanised padlockFB11 padlock, galvanised PAD FB11
Yellow padlockFB14 padlock, yellow
PAD FB14
Fire brigade key
FB1 Key KEY FB1
FB2 Key KEY FB2
FB4 Key KEY FB4
FB11 Key KEY FB11
FB14 Key KEY FB14
Fire brigade LocksA range of locks which can be operated by special keys carried bythe Fire Brigade
LOCKS & HARDWARE FOR METAL GATES 2015/16 www.signetlocks.co.uk [email protected] 01243 552066
16
Locks
Locks
www.signetlocks.co.uk LOCKS & HARDWARE FOR METAL GATES 2015/16
[email protected] 552066
Locks
Gate clo
sers
17
9. Eurocylinders
Quality brass padlock• Solid brass body• Hardened, nickel and chrome plated steel shackle• Double locking
50mm B50
60mm B60
EurocylindersAll cylinders available as keyed alike – just add KA to the end of the code
Also available
• Other cylinder lengths• Offset eurocylinders• Restricted section eurocylinders – keys can only be cut by specified dealers
Rectangular steel armoured padlock
• Solid brass body armoured with a chrome plated and hardened steel case• Armoured padlocks are tested to the European EN Standards (BS EN 12320 - CEN GRADE) and meet grade 4 (80mm) and grade 3 (60 mm)
60mm S60
80mm S80
10. Padlocks
Padlocks .10
Traditional steel padlock Traditional steel padlock keyed to PES12
PES12
Rectangular solid steel padlock 84mm High security solid steel padlock, 84mm wide
S84
Disc padlock70mm diameter, stainless steel
D70
Marine grade padlock
• Stainless steel shackle and inside workings• Comes with a lifetime guarantee
50mm MG50
60mm MG60
Buffers .11
Eurocylinder double sided
Double sided 60mm, 30mm + 30mm EC 60
Double sided 70mm, 35mm + 35mm EC 70
Double sided 90mm, 45mm + 45mm EC 90
Eurocylinder with thumbturn
60mm, 30mm + 30mm TEC 60
70mm, 35mm + 35mm TEC 70
90mm, 45mm + 45mm TEC 90
Eurocylinder single sided30mm + 10mm overall length
SC 40
Bump stop 18 diameter18 diameter x 7mm buffer, M6 x 16 thread
BS 18
Bump stop 50 diameter50 diameter x 30mm buffer, M10 x 25 thread
BS 50
Bump stop 64 diameter64 diameter x 25mm buffer
BS 64
Adjustable gate damperThis top quality stainless steel unit will arrest a gate as it closes and ensure slow, quiet closing. Ideal for use with maglocks
AGD
Gatemaster Gate Silencer KitSimple but effective – gate stop fitted with rubber bump stops
GSK
Bump stop 25 diameter25 diameter x 12mm buffer
BS 25
LOCKS & HARDWARE FOR METAL GATES 2015/16 www.signetlocks.co.uk [email protected] 01243 552066
18
Gate clo
sers
www.signetlocks.co.uk LOCKS & HARDWARE FOR METAL GATES 2015/16
[email protected] 552066
Gate clo
sers
19
12. Gate closers Gate closers .12
GATEMASTER gate closerweld-onStainless steel gate closer with weld-on brackets
GSS
Gas release toolGas release tool for GSS
GSTS
Gas release toolGas release tool for GSB
GSTB
GATEMASTER gate closerscrewfixedStainless steel gate closer with screw fixed brackets
GSSW
Adjustable speed gate closerThis gate closer has a unique adjusting system which enables the closing speed to be controlled simply by turning the cover tube
GSA
Surface mounted gate closerThis popular gate closer has two variable closing speeds for closing and latching. Can also be used to hold open a gate at 90 degrees
For gates up to 50kg
SMC
GATEMASTER gate closerThe robust and reliable GSB gas strut is a top seller due to its suitability for a wide range of applications from commercial gates to ornate wrought iron gates
The gas strut is mounted on the inside of the gate and with its dampened action will not ‘slam’ the gate closed. Exceptionally easy to install due to the innovative design of the adjustable brackets included
• Weld on or screw fixed adjustable brackets available• Unique oil dampened design to control closing speed• Black or stainless steel finish designed for exterior use• No need to reduce gas simply move the strut along the slots in the brackets to adjust closing force• Suitable for gates up to 80kg
Weld on gate closing strut GSB
Screw fix gate closing strut GSBW
Surface mounted gate closer with slide railThe same closer as above but with an additional slide rail to enable easy fitting in most situations
SMR
Stainless steel gate closing spring
Gate closing spring – 250mm. Stainless steel
SSS
Spring gate closerCloses gates up to 80 kg, adjustable force, includes roller bracket to guide spring arm
SGC
Black gate closing springGate closing spring – 250mm. Black finish
SBL
Zinc gate closing spring
Gate closing spring – 250mm. Zinc finish
SZ
Door closer
80kg capacity DC3
120kg capacity DC4-6
140kg capacity DC6-7
Industrial Gas SpringsAvailable in a range of sizes, these Gas Springs have a wide range of uses including supporting the weight of steel hatches and for holding doors and hatches open safely. Any size can be manufactured to order. Not suitable for closing gates
Finished with a hard chromed rod and black powder coated body. Supplied at maximum force with a release valve for reducing the force as required. Supplied with ball joint end fittings
Sizes given are the distance between the centre of the fittings at maximum extension x lengthof stroke
Gas spring 300 x 100mm GS300
Gas spring 428 x 150mm GS428
Gas spring 528 x 200mm GS528
Gas spring 628 x 250mm GS628
GATEMASTER hydraulic gate closer and hinge kitThe hydraulically dampened APS closer, closes gates up to 120kg. Mounted underneath the gate, the closer unit is unobtrusive and hidden inside its own steel case
This unit is highly vandal resistant
The closing speed is easily adjusted using the special key provided and due to the two separate speed adjustment valves the latching speed can be set separately to the closing speed. A fully adjustable top hinge is included
• Very robust unit which has been tried and tested• Meets ROSPA recommendations for gate closing speed• Vandal resistant• Speed adjustable• For welding into a gate• No power required and maintenance free• Will allow a gate to be opened both ways if required and close to the centre• Hold back option available, please ask
APS
LOCKS & HARDWARE FOR METAL GATES 2015/16 www.signetlocks.co.uk [email protected] 01243 552066
20
Gate clo
sers
www.signetlocks.co.uk LOCKS & HARDWARE FOR METAL GATES 2015/16
[email protected] 552066
Hing
es
21
13. Closing hinges Hinges .14
Built-in hingeAdjustable hinge for building into masonry
Built-in hinge M18 BH18
Built-in hinge M22 BH22
Single C hinge withthrust bearingA very strong hinge with horizontal adjustment and a thrust bearing to support the gate weight
SCH
180˚hingeAn adjustable hinge with a slotted plate which gives 2-way adjustment and can be used to allow gates to open 180° 180˚ hinge M18 1818
180˚ hinge M22 1822
Long thread hingeA long thread, fully adjustable hinge to suit all metal gates. These hinges are more aesthetically pleasing than using standard hooks and eyes and are a cost effective solution
Long thread hinge M16 x 135 x 100mm LT16
Long thread hinge M18 x 175 x 148mm LT18
Long thread hinge M22 x 204 x 160mm LT22
Weld-in nut hingeRemovable hinge pin is retained with a strong circlip, Electrogalvanised
thread dia x overall length x thread length
Weld-in nut hinge M18 x 75 x 38mm WN18
Weld-in nut hinge M22 x 85 x 46mm WN22
Weld-in nut hinge M24 x 97 x 50mm WN24
Hinge plate with captive nutFor bolting hinges to gate posts, electrogalvanised
Hinge plate with captive nut, M18, Plate size – 90 x 90 x 4mm P18
Hinge plate with captive nut, M22, Plate size – 110 x 110 x 5mm P22
Double C hingeA very strong hinge with horizontal adjustment
CCH
Rising hinge
100mm, steel, RH – drilled RH RH
100mm, steel, LH – drilled RH LH
Spring hinges – reinforced polymerThese top quality bolt on spring hinges are made from reinforced polymer and have an adjustable stainless steel spring within the hinge. Used in pairs, the 92mm hinge can close gates up to 25kg and the 125mm hinge, 50kg
Spring hinge. 92mm long SC 810
Spring hinge. 125mm long SC 830
Rising hinges setHeavy duty – A well proven product. This hinge set can close gates and doors up to 250 kg in weight. Used as a pair, one hinge lifts the gate as it opens
Maximum vertical movement – 25mm at 180 degrees opening. 38mm dia
Designed to be welded in place Rising hinge set, heavy duty – Right hand RHS RH
Rising hinge set, heavy duty – Left hand RHS LH
Spring hinges – steelA range of steel hinges that can be used to close gates. Available as single action and double action – where the gate will open both ways and return to the centre. Made from steel with a paint finish. Also available in stainless steel
Used in pairs these hinges can close gates up to the weights shown
Sold singly
Additional hinges can be used to increase gate weight capacity
Spring hinge single action steel 100mm – 15 kg gate SHS 100
Spring hinge single action steel 125mm – 25 kg gate SHS 125
Spring hinge single action steel 175mm – 45 kg gate SHS 175
Spring hinge single action stainless steel 100mm – 22 kg gate SHS SS 100
Spring hinge single action stainless steel 125mm – 27 kg gate SHS SS 125
Spring hinge single action stainless steel 150mm – 40 kg gate SHS SS 150
Captive nut hingeTo adjust, slacken off the 2 lock nuts and lock them together, rotate them to adjust the gate and then reclamp them against the heavy washerThread dia x overall length x thread length
Captive nut hinge M18 x 75 x 38mm CN18
Weld-in nut hinge M22 x 85 x 46mm CN22
Extraheavydutyhingewith sealed bearingsM30 thread and adjustable nut with weld in captive washer. Overall width 170mm x height 87mm. This hinge can support gates up to 750 kg (depending on the design of the gate)
EHDH
Adjustable hinge with bearingsIntegral roller and thrust bearing. M20 x 160mm thread, galvanised
AHB
Heavy duty hinge with plain bearingsA precision hinge with plain brass thrust and radial bearings and grease point. M30 x 200mm thread, galvanised
5KH
Spring hinge double action
Steel 125mm – 25 kg gate SHD 125
Steel 175mm – 45 kg gate SHD 175
Stainless steel 100mm – 22 kg gate SHD SS 100
Stainless steel 150mm – 40 kg gate SHD SS 150
Gate closing hinge kitSimple and robust weldable gate hinge with integral adjustable spring
Available in two choice of brackets
Square gate frame CHKS
Round gate frame CHKR
LOCKS & HARDWARE FOR METAL GATES 2015/16 www.signetlocks.co.uk [email protected] 01243 552066
22
Hing
es
www.signetlocks.co.uk LOCKS & HARDWARE FOR METAL GATES 2015/16
[email protected] 552066
Hing
es
23
14. Hinges Hinges .14
Connection pinFor welding into gate frames. For use with round clamp hinges. Dia x overall height x square size
Connection pin 30 dia x 60 x 30mm CP30
Connection pin 35 dia x 80 x 40mm CP35
Connection pin 40 dia x 65 x 50mm CP40
Top pivot with ball bearing Provides a low friction top pivot and has horizontal adjustment. The stub pivot is welded to the top of the gate and the plate and bearing assembly is welded to the post
Top pivot with ball bearing 50mm dia R50
Top pivot with ball bearing 65mm dia R65
Bottom pivot with taper roller bearing
50 dia x 40mm high – 500 kg capacity TRB50
65 dia x 46mm high – 1000kg capacity TRB65
Bottom pivot with ball bearing
50 dia x 40mm high – 300 kg capacity BB50
65 dia x 46mm high – 600kg capacity BB65
Base pivot pin
20 dia x 35 high P20
24 dia x 35 high P24
Offset pivot pin
20 dia OP20
24 dia OP24
Pivot pin base plate
20.5 dia hole B20
24.5 dia hole B24
Weldable base pivotWeldable base pivot with 20mm dia steel ball
WBP
Pivot set with barConsists of a bottom pivot with a steel ball and a top pivot with an adjustable pin
To adjust – remove protective cap, loosen lock nut and rotate pin
Pivot set with bar for 40mm box PSB40
Pivot set with bar for 50mm box PSB50
Pivot set Consists of a bottom pivot with a 25mm diameter steel ball and a top pivot with a pin
For fitting into box section
Pivot set for 40mm box PS40
Pivot set for 50mm box PS50
Round clamp hinge with adjustable nutTo adjust, slacken off the 2 lock nuts and lock them together, rotate them to adjust the gate and then re clamp them against the heavy washerThread dia x overall length x thread length x hole dia
Round clamp hinge with adjustable nut M18 x 103 x 46 x 30mm dia RC18
Round clamp hinge with adjustable nut M22 x 116 x 52 x 35mm dia RC22
Round clamp hinge with adjustable nut M27 x 136 x 65 x 40mm dia RC27
Round clamp hinge with weld-in nutOne piece nut and washer. To adjust, support gate, remove bolt from hinge, adjust as required and reassemble. Thread dia x overall length x thread length x hole dia
Round clamp hinge with weld-in nut M18 x 103 x 46 x 30mm dia RN18
Round clamp hinge with weld-in nut M22 x 116 x 52 x 35mm dia RN22
Round clamp hinge with weld-in nut M27 x 136 x 65 x 40mm dia RC27
Weld on gate eyes, self colourTo fit pin dia x distance from centre of hole to back edge
Weld on gate eyes, 12 x 27mm E12
Weld on gate eyes, 16 x 40mm E16
Weld on gate eyes, 19 x 40mm E19
Weld on gate eyes, 22 x 40mm E22
Weld on gate eyes, 25 x 44mm E25
Weld on gate eyes, 32 x 50mm E32
Thrust BearingsUse to reduce friction on universal weld on hinges and gate hooks and eyes Thrust bearing 12mm PTB 12
Thrust bearing 16mm PTB 16
Thrust bearing 20mm PTB 20
Weld on gate hooks, self colourPin dia x distance from centre of hole to back edge
Weld on gate hooks, 12 x 27mm H12
Weld on gate hooks, 16 x 40mm H16
Weld on gate hooks, 19 x 40mm H19
Weld on gate hooks, 22 x 40mm H22
Weld on gate hooks, 25 x 44mm H25
Weld on gate hooks, 32 x 50mm H32
Hinge pin security collarsThese electro galvanized steel security collars clamp to the hinge pin and prevent gates being lifted off
Available in five sizes
Hinge pin security collars for 12mm pin SC 12
Hinge pin security collars for 16mm pin SC 16
Hinge pin security collars for 19mm pin SC 19
Hinge pin security collars for 22mm pin SC 22
Hinge pin security collars for 25mm pin SC 25
Adjustable gate eyes with 2 nuts
To fit pin dia x length x thread dia
Adjustable gate eyes with 2 nuts, 12 x 100 x M12 AE 12 100
Adjustable gate eyes with 2 nuts, 12 x 150 x M12 AE 12 150
Adjustable gate eyes with 2 nuts, 16 x 150 x M16 AE 16 150
Adjustable gate eyes with 2 nuts, 19 x 100 x M20 AE 19 100
Adjustable gate eyes with 2 nuts, 19 x 150 x M20 AE 19 150
Adjustable gate eyes with 2 nuts, 19 x 200 x M20 AE 19 200
Adjustable gate eyes with 2 nuts, 22 x 150 x M20 Galv AE 22 150
Adjustable gate eyes with 2 nuts, 22 x 200 x M20 Galv AE 22 200
Adjustable gate eyes with 2 nuts, 25 x 150 x M20 Galv AE 25 150
Adjustable gate eyes with 2 nuts, 25 x 200 x M24 Galv AE 25 200
Adjustable gate eyes with 2 nuts, 32 x 200 x M30 Galv AE 32 200
GATEMASTER safety restraint systemThis simple safety device is used to restrain the top of a gate in the event of the top hinge failing
Used on gates up to 150kg it is an essential addition to increase safety in today’s increasingly safety conscious world. Can be welded or boltedin place
Safety restraint system SRS
Permanentfast-fixsecurity collarsStainless steel
These push-on security collars will prevent gates being lifted off. Adds a pleasing aesthetic touch to gate hinges
Available in 4 sizes Security collar for 12mm pin SCP 12
Security collar for 16mm pin SCP 16
Security collar for 19mm pin SCP 19
Security collar for 22mm pin SCP 22
LOCKS & HARDWARE FOR METAL GATES 2015/16 www.signetlocks.co.uk [email protected] 01243 552066
24
Hing
es
www.signetlocks.co.uk LOCKS & HARDWARE FOR METAL GATES 2015/16
[email protected] 552066
Hing
es
25
14. Hinges Hinges .14
2 part pressed hinge stainless steel2 part lift off hinge with removable pin and brass washer. Length x overall width x pin dia x material thickness
2 part pressed hinge stainless steel, 100 x 25.5 x 10 x 2mm 2PHS 100
2 part pressed hinge stainless steel, 140 x 29 x 11 x 2.5mm 2PHS 140
3 part pressed hinge mild steel3 part lift off hinge with removable pin and steel washer. Length x overall width x pin dia x material thickness
3 part pressed hinge mild steel, 100 x 46 x 10 x 2mm 3PH 100
3 part pressed hinge mild steel, 140 x 26 x 11 x 2.5mm 3PH 140
3 part pressed hinge mild steel, 170 x 30 x 12 x 3mm 3PH 170
3 part pressed hinge mild steel, 200 x 36 x 14 x 3mm 3PH 200
3 part pressed hinge stainless steel3 part lift off hinge with removable pin and brass washer. Length x overall width x pin dia x material thickness
3 part pressed hinge stainless steel, 100 x 46 x 10 x 2mm 3PHS 100
3 part pressed hinge stainless, steel, 140 x 26 x 11 x 2.5mm 3PHS 140
4 part pressed hinge mild steelLarge 4 part hinge with 19.8 dia steel pin and brass washers
4 part pressed hinge mild steel, 210 high x 19.8 dia pin 4 PH
Universal weld on hinge, steel, brass pin, self colourLength x body dia x pin dia
Universal weld on hinge, steel, brass pin 60 x 10 x 6mm UNI 60B
Universal weld on hinge, steel, brass pin 80 x 12 x 7mm UNI 80B
Universal weld on hinge, steel, brass pin 100 x 14 x 8mm UNI 100B
Universal weld on hinge, steel, brass pin 120 x 16 x 10mm UNI 120B
Universal weld on hinge, steel, brass pin 140 x 16 x 10mm UNI 140B
Universal weld on hinge, steel, brass pin 160 x 22 x 14mm UNI 160B
Universal weld on hinge, steel, brass pin 200 x 22 x 14mm UNI 200B
Universal weld on hinge with grease point, self colourLength x body dia x pin dia
Universal weld on hinge with grease point, 100 x 14 x 8mm UNI 100SG
Universal weld on hinge with grease point, 120 x 14 x 8mm UNI 120SG
Universal weld on hinge with grease point, 140 x 14 x 8mm UNI 140SG
Universal weld on hinge with grease point, 160 x 14 x 8mm UNI 160SG
Universal weld on hinge with grease point, 200 x 14 x 8mm UNI 200SG
Universal weld on hinge, steel, steel pin, self colourLength x body dia x pin dia
Universal weld on hinge, steel, steel pin 60 x 10 x 6mm UNI 60S
Universal weld on hinge, steel, steel pin 80 x 12 x 7mm UNI 80S
Universal weld on hinge, steel, steel pin 100 x 14 x 8mm UNI 100S
Universal weld on hinge, steel, steel pin 120 x 16 x 10mm UNI 120S
Universal weld on hinge, steel, steel pin 140 x 16 x 10mm UNI 140S
Universal weld on hinge, steel, steel pin 160 x 22 x 14mm UNI 160S
Universal weld on hinge, steel, steel pin 200 x 22 x 14mm UNI 200S
Universal weld on hinge stainless steelLength x body dia x pin dia
Universal weld on hinge, steel, steel 60 x 10 x 6mm UNI 60SS
Universal weld on hinge, steel, steel 80 x 12 x 7mm UNI 80SS
Universal weld on hinge, steel, steel 100 x 14 x 8mm UNI 100SS
Universal weld on hinge, steel, steel 120 x 16 x 10mm UNI 120SS
Universal weld on hinge, steel, steel 140 x 16 x 10mm UNI 140SS
New Product
2 part pressed hinge mild steel 2 part lift off hinge with removable steel pin and steel washers
Length x overall width x pin dia x material thickness
2 part pressed hinge mild steel, 60 x 18 x 5.8 x 2mm 2PH 60
2 part pressed hinge mild steel, 80 x 22 x 8 x 2mm 2PH 80
2 part pressed hinge mild steel, 100 x 25.5 x 8.8 x 2mm 2PH 100
2 part pressed hinge mild steel, 140 x 30 x 11 x 2.5mm 2PH 140
2 part pressed hinge mild steel, 170 x 32 x 12 x 3mm 2PH 170
2 part pressed hinge mild steel, 200 x 36 x 14 x 3mm 2PH 200
Heavy duty weldable hingeWeldable hinge 190 x 38mm dia with 25mm dia pin and grease point
RHS D
Flag hinges2 part pressed flag hinge with fixed pin. Available in left hand and right hand versions. Left hand hinge shown
Length x overall width x pin dia x material thickness
2 part pressed flag hinge, 70 x 54 x 8 x 2.6mm LH FH60L
2 part pressed flag hinge, 70 x 54 x 8 x 2.6mm RH FH60R
2 part pressed flag hinge, 114 x 80 x 10 x 3mm LH FH100L
2 part pressed flag hinge, 114 x 80 x 10 x 3mm RH FH100R
2 part pressed flag hinge, 155 x 92 x 12 x 3.5mm LH FH140L
2 part pressed flag hinge, 155 x 92 x 12 x 3.5mm RH FH140R
2 part pressed flag hinge, 175 x 92 x 12 x 3.5mm LH FH160L
2 part pressed flag hinge, 175 x 92 x 12 x 3.5mm RH FH160R
3partpressedflaghingewith removable pinLength x overall width x pin dia x material thickness
3 part pressed flag hinge, 130 x 105 x 9.8 x 2.5mm 3FH110
3 part pressed flag hinge, 160 x 94 x 11.8 x 3mm 3FH140
3 part pressed flag hinge, 190 x 110 x 11.8 x 3.5mm 3FH170
3 part pressed flag hinge, 220 x 116 x 12.8 x 4mm 3FH200
2partpressedflaghingewith removable pin2 part pressed flag hinge, Length x overall width x pin dia x material thickness150 x 150 x 11.8 x 3.5mm LH/RH
FH150
HeavydutyflaghingeCan be used as LH or RH. Produced from solid steel this flag hinge has a 14mm pin and thrust bearing. Maximum capacity per hinge 125kg Overall height 140mm, overall width 92mm, pin dia 14mm
HDFH
LOCKS & HARDWARE FOR METAL GATES 2015/16 www.signetlocks.co.uk [email protected] 01243 552066
26
Hing
es
www.signetlocks.co.uk LOCKS & HARDWARE FOR METAL GATES 2015/16
[email protected] 552066
Panic hard
ware
27
14. Hinges Panic hardware .15
Panicexitbar
Panic exit push bar – For use where the general public use the gate, 1200mm Long PBE
Panic exit push bar for double doors PBED
Extra length push bar 1650mm PB1650
Extra length push bar 2150mm PB2150
GATEMASTER Panic pad, digital lock and weldable lockcase kitPanic exit from the inside and access from outside via the keypad. Weld the lock case into the gate and fit the panic pad and digital lock after painting or galvanising
Available in 3 lock case widths.
Panic pad, digital lock and lockcase kit 30mm width PPDL 30
Panic pad, digital lock and lockcase kit 40mm width PPDL 40
Panic pad, digital lock and lockcase kit 50mm width PPDL 50
Panicexitbarwithvertical boltsPanic exit bar with vertical bolts
PBEV
Panicexitpadwithvertical boltsPanic exit pad with vertical bolts
PPEV
Panic padbolt
Panic padbolt – Break tube to operate RPB
Spare tube RPS
Outside access deviceFitted in conjunction with a panic bar or pad, this device allows access from outside via the lockable knob
OADE
PanicexitpadFor use where trained personnel use the gate
Panic exit pad PPE
GATEMASTER Panic pad security shieldHelps prevent panic pad being operated from outside
Left hand version shown
Panic pad security shield, left hand PPSSL
Panic pad security shield, right hand PPSSR
HeavydutyboltonflaghingeOne leaf is welded and the other is bolted in place. Used where the fabrication needs to be disassembled
Overall height 140mm, overall width 130.5mm, pin dia 14mm
HDFHB
Heavy duty 2 part hingeMade from solid steel, this hinge has a 12mm dia pin and a thrust bearing. Slotted fixing holes allow horizontal and vertical adjustment. Hinges can be fitted after fabrication is painted/galvanised.
Supplied with fixing bolt covers
Overall height 99.5mm, overall width 84mm, pin dia 12mm
HDH 2P
Heavy duty 3 part hingeAs the above hinge but 3 part to increase the load bearing capacity.
Overall height 153mm, overall width 84mm, pin dia 12mm
HDH 3P
Undrilled hingeMild steel hinge without holes. Self colour
Height x overall width x leaf thickness
Undrilled hinge, 76 x 63 x 2mm UD 76
Undrilled hinge, 102 x 73 x 2.6mm UD 100
Heavy duty undrilled hingeStrong double pressed hinge, self colour, used for security doors
Height x overall width x leaf thickness
Heavy duty undrilled hinge, 76 x 60 x 4.2mm UDH 76
Heavy duty undrilled hinge, 102 x 72 x 4.2mm UDH 102
Heavy duty undrilled hinge, 150 x 98x 6.0mm UDH 150
Heavy duty drilled hingeElectro galvanised
Height x overall width x leaf thickness
Heavy duty drilled hinge, 76 x 60 x 4.2mm DH 76
Heavy duty drilled hinge, 102 x 72 x 4.2mm DH 102
Heavy duty drilled hinge, 150 x 98 x 6.0mm DH 150
Heavy duty drilled hingeStainless steel with bearings
Height x overall width x leaf thickness
Heavy duty drilled hinge, 75 x 50 x 3mm 304 stainless steel DHS4 75
Heavy duty drilled hinge, 100 x 76 x 3mm 304 stainless steel DHS4 100
Heavy duty drilled hinge, 125 x 102 x 3mm 304 stainless steel DHS4 125
Heavy duty drilled hinge, 100 x 76 x 3mm 316 stainless steel DHS6 100
Continuous hinge undrilledOpen width x length x material
Continuous hinge undrilled, steel, 38 x 1829 x 1.2mm CH 38
Continuous hinge undrilled, steel, 51x 1829 x 2.0mm CH 51
Continuous hinge undrilled, stainless steel, 51 x 1829 x 2.0mm CHS 51
Continuous hinge undrilled, stainlesssteel, 51 x 1829 x 1.2mm CHS 51L
Continuous hinge undrilled, steel, 80 x 2000 x 3.0mm CH 80
Continuous hinge undrilled, Stainless steel, 80 x 2000 3.0mm CHS 80
LOCKS & HARDWARE FOR METAL GATES 2015/16 www.signetlocks.co.uk [email protected] 01243 552066
28
Electric g
ate hardw
are
www.signetlocks.co.uk LOCKS & HARDWARE FOR METAL GATES 2015/16
[email protected] 552066
Electric g
ate hardw
are
29
16. Electric gate hardware Electric gate hardware .16
Electric gate lockEasy to fit and reliable, this electric lock has a galvanised case and solid brass deadlocking latch. Keyed both sides this lock can also be remotely released using a 12V AC supply.
Electric gate lock right hand open in EKK 1
Electric gate lock left hand open in EKK 2
Electric gate lock right hand open out EKK 3
Electric gate lock left hand open out EKK 4
Electric gate lockKeyed both sides with electric release and mechanical release button
Electric gate lock with release button, right hand open in EKKP 1
Electric gate lock with release button, left hand open in EKKP 2
Electric gate lock with release button, right hand open out EKKP 3
Electric gate lock with release button, left hand open out EKKP 4
High security electric gate lockA high security electric gate lock that can be used for both left and right hand gates. Also ideal for use on double gates
Keyed both sides with electric release CE
Keyed both sides with electric release and mechanical release button CEP
Transformer for CE/CEP TCE
Electromagnet – mortise
Electromagnet Electrogalvanised, 250kg capacity, 38 x 186 x 28mm
EMM250
Gate Maglock SystemThis kit includes a stainless steel 545kg holding force external use maglock and attachment plates with integral pull handles. The simplest way to fit an electromagnet to a gate
EMGK
Electric release, mortise, heavy duty, monitoredHeavy duty electric release with an integral switchthat can be used to confirm that the gate is closed
ER HDM
Electromagnet Stainless Steel270kg capacity, surface fixed44 x 230 x 40mm
EMS270
Electromagnet Stainless Steel545kg capacity, surface fixed63 x 222 x 39mm
EMS545
Electric releasesA range of electric releases that are used to release gates remotely. Can be used with manyof the gate latches in this catalogue – please ask
Available as fail safe and fail secure
Fail safe – when the power is off the electric release unlocks
Fail secure – when the power is off the electric release remains locked
Electric release, mortise, fail safe ER FSF
Electric release, mortise, fail secure ER FSC
Heavy duty keypad, with integral electronicsStrong stainless steel housing and robust keys make this keypad an ideal choice for car parks and industrial areas
HDKS
Audio and Video entry systemsA high quality range of entry phone kits which are simple to fit and have excellent speech quality
We can create bespoke systems, contact us with your requirements
StainlesssteelproximityreaderSurface mounted reader with sealed electronics. High resistance to vandalism. 97 x 76 x 20mm.Tri-coloured LEDs indicate recognition of the card or fob
SSPR
Stainlesssteelproximityreader – Narrow styleAs above SSPR. Measuring 140 x 35 x 22mm this reader can be fitted to a gate post
SSPR NS
ControllerforproximityreadersUsed with the above proximity readers, this controller has integral electronics to control up to two doors and recognise up to 500 proximity cards or fobs
CPR
ProximityfobFits onto a key ring
PF
Brackets for EMS270
Brackets for EMS270 EMS270Z
Brackets for EMS545 EMS545Z
LOCKS & HARDWARE FOR METAL GATES 2015/16 www.signetlocks.co.uk [email protected] 01243 552066
t
30
Electric g
ate hardw
are
www.signetlocks.co.uk LOCKS & HARDWARE FOR METAL GATES 2015/16
[email protected] 552066
Gate hard
ware
31
16. Electric gate hardware Gate hardware .17
PushbuttonexitswitchStainless steel, surface mounted
PBS
Domed push button exitswitchStainless steel, surface mounted
DPBS
Pushbuttonexitswitchnarrow styleStainless steel, surface mounted
PBSN
Door loopFor protecting cables from the gate post to the gate. 600mm
DL
Armoured door loopWith vandal resistant ends. 600mm
ADL
Relay and timer module0 – 20 second delay timer with relay for operating locking devices
RTM
Key switchesSurface mounted, stainless steel key switches with a high resistance to vandalism
Available in 3 versions
Maintained switch from which the key can be removed in both the on or off position KSM
Momentary switch. Insert the keyand rotate it against a spring to switch a device on or off KSMO
3 position switch. KS3
7 day timer
Timer, 7 day 12V, Robust and easy to program T12
Timer, 7 day 24V T24
Timer, 7 day 240V T240
Dropboltgalvanisedfinish450mm overall length 16mm dia
GDB
Dropbolt socketGalvanised, to concrete in
DBS
Heavy padbolt, 210mm overall length10 x 25 steel bar, electrogalvanised
HPB
Padlockable dropbolt galvanisedfinish450mm overall length, 16mm dia
PDB
Padlockable dropbolt stainless steelPadlockable dropbolt stainless steel 450mm
PDBSS
Stainless steel spring dropboltFor double gates. Closing the second gate shoots the bolt into position
SDB
Concealed vertical dropboltA very neat drop bolt for double gates which is enclosed within the box section frame of the gate – minimum box section 30 x 30mm. When the second gate is closed, the dropbolt cannot be lifted
CDD
As above product, to suit single gates CDS
GATEMASTER Autolocking dropboltFor double gates, weld fixed
In use, the dropbolt is lowered and rotated so that the lifting plate folds across the edge of the first gate. The dropbolt is now locked in position. Closing the second gate prevents the dropbolt being unlocked. The second gate can now be locked to the first gate with a standard gate lock. The gates cannot be ‘spread apart’ because the dropbolt is locked in position
ADB
As above Dropbolt but fixed with bolts to the edge of wooden or metal gates. ADBS
New Product
Light padbolt
130mm overall length – 6 x 16 steel bar, electrogalvanised P130
180mm overall length – 6 x 16 steel bar, electrogalvanised P180
250mm overall length – 6 x 16 steel bar, electrogalvanised P250
Metal cased power supplies with battery charging circuit and space for batteryOrder battery separately
Metal cased power supply, 12V dc 1.0 amp, 215 x 215 x 80mm MCPS12 1
Metal cased power supply, 12V dc 2.0 amp, 215 x 215 x 80mm MCPS12 2
Power supply, 12V dc. 1.5 amp
142 x 92 x 60mm. DIN Rail mounting PS12 15
with built-in timer adjustable from 0.5to 3.5 seconds. 142 x 92 x 60mm. DIN Rail mounting PS12T 15
LOCKS & HARDWARE FOR METAL GATES 2015/16 www.signetlocks.co.uk [email protected] 01243 552066
32
Gate hard
ware
www.signetlocks.co.uk LOCKS & HARDWARE FOR METAL GATES 2015/16
[email protected] 552066
Gate hard
ware
33
17. Gate hardware Gate hardware .17
Galvanised padbolt220mm overall length -16 dia bolt
GPB
Gate hookGalvanised, 150mm
GH150
Gate holdbackFor concreting in
GHC
Locking bar for padlocksHeavy galvanised locking bar – Horizontal
HB
Locking bar for padlocksHeavy galvanised locking bar – Vertical
VB
Stainless steel padboltStainlesss steel padbolt
SPB
Padlockable slide bolt – blackPadlockable slide bolt – black
PSB
Springbolt
9.5mm dia SB 9
12mm dia SB 12
16mm dia SB 16
Heavy hasp & staple
Heavy hasp & staple HS
Heavy hasp & staple stainless steel HSSS
High quality security chain,
1200mm long MDC12
2000mm long MDC20
Carbine hook316 Stainless steel 5 x 50mm
CHK 5
Round escutcheon45mm diameter
ROE
Security escutcheon to weldThis security escutcheon protects the eurocylinder from attack. 30 x 46mm
4mm WSE04
8mm WSE08
12mm WSE12
Staple on plate
316 Stainless steel 5mm SPSS5
316 Stainless steel 8mm SPSS8
Link
316 Stainless steel 4mm LSS4
316 Stainless steel 6mm LSS6
ChainsandfittingsA range of popular sizes of steel chain and fittings. Sizes indicate link material diameter x length
Sold in metres
Chain BZP 1 x 10mm x 1M CG1
Chain Black 2.5 x 30mm x 1M CB1
Chain Heavy duty Galv 2.5 x 24mm x 1M CG2
Chain Black 3.0 x 31mm x 1M CB2
Chain Heavy duty Galv 3.0 x 32mm x 1M CG3
Chain Heavy duty Galv 4.0 x 41mm x 1M CG4
Chain Black 5.0 x 44mm x 1M CB3
Chain Heavy duty Galv 6.0 x 52mm x 1M CG5
Chain 316 Stainless steel 3.0 x 22mm x 1M CSS1
Chain 316 Stainless steel 5.0 x 32mm x 1M P130
Stainless steel escutcheonStainless steel escutcheon
SSE
Black plastic escutcheon32 x 67mm
BPE
Brush stripMultiple applications. Fix to doors to prevent draughts
For more information visit our website at:www.signetlocks.co.uk
or phone us
Post capsA range of post caps are available
For more information visit our website at:www.signetlocks.co.uk
or phone us
LOCKS & HARDWARE FOR METAL GATES 2015/16 www.signetlocks.co.uk [email protected] 01243 552066
34
Gate hard
ware
www.signetlocks.co.uk LOCKS & HARDWARE FOR METAL GATES 2015/16
[email protected] 552066
Slid
ing g
ate hardw
areG
ate hardw
are
35
17. Gate hardware Cantilever track .18
Gate wheels and track .19
Cantilever Sliding Gate SystemThese cantilever gate kits are designed for applications where a sliding gate is required but the ground is uneven or the gateway is being used by heavy machinery that could damage standard track.
• Quieter than floor track systems• No need to excavate the roadway and the roadway can be used during installation• The solution for installing sliding gates on sloping ground• No track wear even in high usage applications• Track is delivered in 6m lengths and extra lengths are available• Free delivery to most of the UK on all cantilever gate kits• CGK250 and CGK550 track size - 66 high x 58 wide x 3mm thick x 6m long• CGK800 – 60 high x 60 wide x 3.5mm thick x 6m long
Cantilever gate kit, 3m opening, 250kg weight limit CGK 250
Cantilever gate kit, 5m opening, 550kg weight limit CGK 550
Cantilever gate kit, 8m opening, 800kg weight limit CGK 800
Gate latch strike8mm thick
GLS
Railing lug double hole73mm overall length – 25 x 5 material, 11mm holes
RL73
Railing lug adjustable60mm overall length, 25 x 8 material, 13mm slot
RLA
GrillfixingspacerThese decorative spacers are adjustable in length and are used when fixing grills into reveals in brickwork. Length – 32mm to 40mm, Dia – 35mm, hole dia – 14mm
GFS
Dropbolt eyeWeldable eye with 19.5mm dia hole
DBE
Dropbolt holderTo retain dropbolt when lifted
DBH
Dropbolt carrierDropbolt carrier
DBC
Gate latch160mm x 30mm x 6mm
GL
Gate latch strap
75mm overall length – 25 x 5mm material GLS75
90mm overall length – 25 x 5mm material GLS90
Railing lug single hole
33mm overall length – 25 x 5 material, 11mm hole RL33
52mm overall length – 25 x 5 material, 11mm hole RL52
Gate stop
Cast. Heavy cast stop for bolting to floor SC HD
Pressed. Pressed stop for screw fixing, electrogalvanised SP
Concreting. Electrogalvanised for concreting SC
Railing lug slotted
12mm slot – 52mm overall length, 25 x 8 material RLS 2512
16mm slot – 52mm overall length, 30 x 8 material RLS 3016
40 x 9 material – 60mm overall length, 12mm slot RLS 4012
50 x 9 material – 62mm overall length, 12mm slot RLS 5012
Drop catch to boltIdeal for securing doors and hatches
DCB
Drop catch to weldIdeal for securing doors and hatches
DCW
Gate top guide roller
M14 thread – 30mm dia x 35mm long nylon roller TR14
M16 thread – 40mm dia x 62mm long nylon roller TR16
Gate top guide roller assemblyAdjusts to guide gates made from 40mm to 60mm wide box
TG
Gate wheel with enclosed springGalvanised finish, 100mm dia wheel – for supporting the leading edge of a hinged gate
GWE
LOCKS & HARDWARE FOR METAL GATES 2015/16 www.signetlocks.co.uk [email protected] 01243 552066
36
Gate hard
ware
www.signetlocks.co.uk LOCKS & HARDWARE FOR METAL GATES 2015/16
[email protected] 552066
Gate hard
ware
37
19. Gate wheels and track Overhead track system .20
Tracksurfacefixed
For 16mm dia groove wheels, 3m length TS 16
For 20mm dia groove wheels, 3m length TS 20
Track concreted in
For 16mm dia groove wheels, 3m length TC 16
For 20mm dia groove wheels, 3m length TC 20
Track joining pin
For TS/TC16 TJP 16
For TS/TC20 TJP 20
Gate stop wall mountedGate stop wall mounted
SE
GatestopfloormountedGate stop floor mounted
SF
Gate stop for weldingGate stop for welding
SG
Heavy duty overhead track systemSteel track, 200 kg capacity, 3m length
OTH
Wall bracketFor use with heavy duty overhead track system
OTH WB
Medium duty overhead track systemSteel track, 85 kilo capacity, 3M length
OTS
Double wheel assemblyFor use with medium duty overhead track system both steel and aluminium
OTA WA
Wall bracketFor use with medium duty overhead track system
OTS WB
Rubber end stopFor use with medium duty overhead track system both steel and aluminium
OTA ES
Lower guide trackGuide system for sliding doors. Heavy duty
LGT
Single wheel assemblyFor use with heavy duty overhead track system
OTH SW
Single swivel wheel assemblyFor use with heavy duty overhead track system
OTH SWS
Double wheel assemblyFor use with heavy duty overhead track system
OTH DW
Rubber end stopFor use with heavy duty overhead track system
OTH ES
Lower guide wheelGuide system for sliding doors. Heavy duty
LGW
Weld on wheel
80mm dia – Fits 16mm dia track. 300kg capacity WB80
140mm dia – Fits 20mm dia track. 600kg capacity WB140
Bolt through wheel
80mm dia – Fits 16mm dia track. 300kg capacity WA80
120mm dia – Fits 16mm dia track. 300kg capacity WA120
140mm dia – Fits 20mm dia track. 600kg capacity WA140
Bolt on wheel
80mm dia – Fits 16mm dia track. 300kg capacity WC80
120mm dia – Fits 16mm dia track. 300kg capacity WC120
140mm dia – Fits 20mm dia track. 600kg capacity WC140
Flush gate trackFor sliding gates, this track fits flush with the surface leaving no bump in the road. The trip hazard associated with traditional surface track is removed, also producing a professional appearance to your sliding gate project
Perfect for use in entrances used by solid wheel vehicles such as forklifts
SFTS20
www.signetlocks.co.uk LOCKS & HARDWARE FOR METAL GATES 2015/16
[email protected] 552066
‘Lock’ head
ing‘Lo
ck’ heading
39
LOCKS & HARDWARE FOR METAL GATES 2015/16 www.signetlocks.co.uk [email protected] 01243 552066
38
Notes
www.signetlocks.co.uk
01243 552066
www.signetlocks.co.uk
01243 552066
LOCKS & HARDWARE FOR METAL GATES 2015/16 www.signetlocks.co.uk [email protected] 01243 552066
40
‘Lock’ head
ing‘Lo
ck’ heading