411 Fountain Lakes Blvd

St. Charles, Missouri 63301 ph: 636.946.6525 fx: 636.949.1576

www.lmiaerospace.com

Dear Valued Supplier: Thank you for being a valued supplier-partner to LMI Aerospace. In the spirit of building on that partnership and growing together, I would like to remind you of the processing and painting capabilities we offer at our Cuba, MO, and Tulsa, OK, operations. We recently renovated our Cuba facility and expanded our Tulsa operations to better support our customers’ needs. I am confident you will be very satisfied with the services we offer at competitive pricing. Attached you will find information about LMI’s processing capabilities and capacity by location. If you have questions, please contact the LMI Aerospace processing contacts listed below. To help make it more enticing for you to give us an opportunity, we are offering no lot charges for the first 3 months for any new customers who do not currently do business with one of our processing facilities. I recognize that changing from your existing processor can be a bit burdensome, but I am confident if you give us an opportunity to win your work, you won’t be disappointed. Finally, as we grow at LMI and sourcing packages become available to the supply base, we will make every effort to support those that work more strategically with LMI. We look forward to working with you in the near future, and continuing to expand the partnership between our companies. Sincerely,

Brian McCarthy Executive Director, Supply Chain Enclosure

LMI Aerospace Processing Contacts

Justin Crumley General Manager – LMI Cuba & LMI Tulsa 316-617-0044 (mobile) 918-281-0103 (office)

Shea Tinker Business Development Manager 316-708-5271 (mobile)

LMI Aerospace Processing Capability

LMI Aerospace Cuba

LMI Aerospace - Cuba

-Located in Cuba, MO

-133,000 square feet of floor space

-136 team members working 3 shifts

Accreditation

NADCAP accredited for chemical processing and organic coatings, and Non-destructive Testing

AS9100C- Quality Management system for Aerospace Industry

Shipping & Receiving

Receiving Hours:• 7:00AM- 11:00PM• Monday –Friday

Shipping:• LMI Cuba delivers Monday-Friday

covering Wichita to St. Louis.

• Ability to ship UPS, Fed-Ex, and other common carriers upon request.

• All orders include packing slip and certification of conformance.

Chemical Processing

• LMI-Cuba has 4 chemical processing lines.

• Aluminum and Titanium Processing Capabilities

• Anodize (Boric-Sulfuric, Chromic, Sulfuric)

• Alodine (600, 1200, and 1500)

• Alkaline Cleaning

• Titanium Etch

• Hard Anodize

Pre-Penetrant Etch Capacity

Aluminum Pre-Penetrant Etch• 42’ x 5’ x 8’

Titanium Pre-Penetrant Etch• 42’ x 5’ x 8’

Anodize Types and Capacities

Anodize:• Boric-Sulfuric: 42’ x 5’ x 8’• Chromic: 12’ x 4’ x 4’• Sulfuric Ty II: 42’ x 5’ x 8’• Sulfuric Ty III: 12’ x 4’ x 4’

Dyes:• Black Dye HL3 Type III: 12’ x 4’ x 4’• Black Dye MLW Type II: 8’ x 4’ x 4’

Seals:• Dichromate• Dilute• Clear• Nickel Acetate

Non-Destructive Testing (NDT)

- Fluorescent Penetrant Inspection, Level 2

- Level 3 available upon request

- Full Service Hardness/Conductivity Testing

- Capacity up to 42’ using electrostatic technology

Conversion Coat / Chem Film

Brush and Immersion applications

• Alodine 600: 8’ x 4’ x 4’

• Alodine 1200: 42’ x 5’ x 8’

• Alodine 1500: 8’ x 4’ x 4’

Masking

Full Catia Capability• Ability to convert Catia, Adobe, and

other program models into internal masking aids.

• Liquid/Paper/Tape Masking

• 2 plotters that allow cutting of exact dimensions.

Organic Coatings

• Primers

• Fuel tank coatings

• Topcoats

• Heat-resistant coatings

• Teflon (Anti-Chafe)

• Dry film Lube

• Sol Gel

Organic Coatings Capacity

Full Service Paint Shop• 3 Pass Through Side Draft Paint Booths:

• (2) 52’ x 14’ x 10’• (1) 26’ x 14’ x 9’

Part Mark• 2 Videojet machines utilized for

identification of parts

• Hand stamp or tag parts as required

• Overcoats for ID are also available upon request

• EC776: Fuel Resistant Overcoat

• Humiseal: protective coating for electronic application

• MIL-PRF-85285: Type I Class H clear gloss polyurethane overcoat

Customer Order Tracking

Work Order Tracking System

• Tracks orders with real time tracking from received date to completion date

• Allows real time order tracking in the production areas, with live updating dispatch reports

• Allows the inputting of special notes, requirements, and customer related information documented into work order.

LMI Aerospace Tulsa

Finishing and Distribution

Facility

Close proximity to Spirit Aerospace Tulsa

175,000 sq. ft. existing

60,000 sq. ft. potential expansion

145 Employees

Capability

Chemical Conversion Processes

Primer Application

Topcoat Application

Chemical Milling

NDT

Spray Dot Mapping

Polishing

Raw Material Services

Distribution Shipping Services

Chemical Milling

• We operate a type II chem milling line, which uses environmentally friendly water based maskant. Typical flow time, from receipt of parts and tools to shipment of chem milled parts, is measured in days as opposed to the weeks usually required by other chemical milling subcontractors.

Chemical Conversion Coating

• Both clear and colored chem-film (Alodine).

Anodize• We provide chromic acid Boric Sulfuric anodize processing that meets the required specifications of military and

non-military aircraft. Both high purity rinse and seal are utilized depending upon customer requirements.

Penetrant Inspection• We provide Penetrant inspection to customer specifications, and process and inspect parts up to 20 feet in

length.

Primer, Top Coat, and Spray Dot Application• We maintain a paint inventory that includes 150 different Top Coat and Prime paint types. This also includes a

wide variety of top coats and approximately 20 Prime types that meet OEM specifications.

Polishing• We have extensive experience polishing skin quality parts, and are capable of repairing clad defects.

Finishing Capabilities

Facility Overview

NADCAP CERTIFIED SINCE 2003AS9100 CERTIFIED SINCE 2004

D6-9002 POLISH

Certifications:

• Nadcap-AC7108, /1, /2, /5 NADCAP Audit Criteria for Chemical Processing, Painting, Pre-Penetrant Etch & Chemical Milling

•• Nadcap-AC7114, S, /1,/1S NADCAP Audit Criteria for Non-Destructive

Testing (NDT)•• Quality System to AS9100 Rev C by Register NQA

Chemical Processing

15’ Process Line• Alkaline Clean Tank• Mild Etch Tank• Deoxidize Tank• Chromic Acid Anodize

Tank• Boric Sulphuric Anodize• Dilute Seal Tank• 4 Rinse Tanks• Clear Chem – Film (1500)

30’ Process Line• Alkaline Clean Tank• Alodine 1200 Tank• 2 Desmut/Deoxide Tanks• 4 Rinse Tanks• Color Chem Film (1200)• Chemical Mill Tank

Chemical MillingEQUIPMENT

• 30’ Process and chem mill tank line• 15’ Process and chem mill tank line• 22’ Dip mask tank • 30’ drying oven

Organic Coatings

Equipment:

• 2- 38’ primer booths• 2- 34’ drying ovens • 1- 30’ Topcoat booth• 1- Spray dot booth

Polishing

• Customer feedback consistently illustrates LMI-Tulsa polishing processes continue to set the benchmark within the industry.

• Consistent 100% EAR and OTD

• Spray Maskant Booth & Robotics

• 5-axis Laser Scribe with UVF

• 5-axis Laser CNC Trim with UVF

• Additional chem mill line

Current Expansion