BIDITUP AUCTIONS & APPRAISALS WORLDWIDEWWW.BIDITUP.COM

AUCTIONTuesday, August 16, 2005Beginning at 10:30 AM CDT1200 West 7th StreetMt. Carmel, IL 62863, USA

Assets No Longer Required in the Continuing Operations of

World Famous Manufacturer of Hand and Power Tools,Diagnostics and Shop Equipment Featuring CNC Machine Tools,Polishing Equipment, Plating Line and Rolling Stock

LIVE ON-SITE

CNC Vertical Machining CentersCNC Horizontal Machining CentersCNC Tool GrinderBroachesMilling MachinesLatheScrew MachinesGrinders & tool cuttersEDM MachineBoringDrillingTapping MachinesPresses

CNC CNC

CINCINNATI MILACRON HORIZONTAL MACHINING CENTER CNC TOOL GRINDER

Honing MachinesAutomatic Drilling MachineDrill PressesVertical BandsawRadial Arm SawTable SawWeldersAbrasive & Blast EquipmentWashers & Cleaning SystemsVibratory Finishing LineBuffing & FinishingHeat Treating Equipment & FurnacesPlating Line

Black Oxide LinePackaging EquipmentTrash CompactorDust CollectorWaste Water Treatment EquipmentInspection EquipmentMaterial HandlingForkliftsRolling StockHydraulic shaperVertical TapperRadial Reveting MachineMiscellaneous & Much More!

CNC VERTICAL/HORIZONTAL MACHINING CENTERS, CNC TOOL GRINDER, BROACHES, MILLING MACHINES,LATHE, SCREW MACHINES, GRINDERS & TOOL CUTTERS, EDM MACHINE

TO SCHEDULE AN AUCTION OR APPRAISAL, CALL 818.508.7034

CNC VERTICAL MACHINING CENTERS (2) Cincinnati Milacron Vertical Machine Center, MDL. 15VC-1000, X Axis Travel: 40”,Y Axis Travel: 20”, Z Axis Travel: 25”, Throat Depth: 22-1/4”, Spindle Diameter: 8”,Spindle Gauge Line to Work Surface: 30” Maximum, 5” Minimum, Table: 44”x 20’,26 Tool Auto Tool Changer, #50 Series “V” Flange Taper, Acramatic 850 MC Control,3 Axis Contouring S/N 7015-A01-88-0010, 7015-A01-88-0009

CNC HORIZONTAL MACHINING CENTERS (3) Cincinnati Milacron M-1 High Performance Horizontal Machining Center, WithAcrimatic CNC 850 MC Control, Twin Pallet , MDL. AD, X Axis Traverse: 20”, Y AxisTraverse: 20”, Z Axis Traverse: 15”, Distance From Spindle Center to Top of Table:4”-25”, Distance From Spindle Nose to Center of Table: 10”-25”, Pallet Size: 19.7 inchsquare, Table Load Capacity Each Pallet: 1600 lbs, # of Index Table Positions: 360.000,Spindle Nose: #50 ANSI, Spindle Speed: 500-10,000 RPM, 15 HP, Tool ChangeCapacity: 24 Tools, Chip Conveyor, S/N 3175A0188-0003, 3175A0187-0002,3175A0187005

CNC TOOL GRINDER Walter Helitronic 50 NC Tool Grinder, Type: 50NC-RS4, Polycon Filter System,With Tooling, Mist Extractor, Coolant, Magnet Table, Full CNC Control, S/N 974

BROACHES Rebuilt 1995 Oil Gear 10 Ton Dual Ram Broach, MDL. XD20-54, Shadow V Light Curtains,Chip Conveyor, Tooling, Coolant

General Vertical Broach, MDL. G.B.V.S, Stroke: 42”, 15 Ton Capacity, With Chip Conveyor,S/N 45284

General Broach Dual Ram, MDL. G.B.V.D, Chip Conveyor, Shadow V Light Curtains,54” Stroke, 10 Ton Capacity, Tooling. S/N 90061

Large Amount of Broaches & Broach Holders

MILLING MACHINES (2) Lagun Twin Spindle Vertical Milling Machine, With Dynapath Delta Autocon CNCControl, Power Draw Bar, S/N 17927

Lagun Twin Spindle Vertical Milling Machine, With Dynapath Delta 10 CNC Control,Power Draw Bar

Kerney & Trecker #2 Vertical Head Rotart Mill, MDL. D, S/N 16-8303

Lagun Vertical Mill, S/N: SE-17116, 3 HP Variable Speed, Digital Readouts,Slotting Head

Kent-Owens Horizontal Production Milling Machine, MDL. 2/20, Fully Automatic with#4000 Parker Motion Controller, S/N1M5585

Kent-Owens Auto Milling Machine, MDL. 1-V, S/N1V-112

(2) Kent Owens 1-M Horizontal Production Mill

LATHE 1996 NITTO Polygon Lathe, MDL. PC165, With 8” Hydraulic Chuck, S/N 1131

SCREW MACHINES Acme-Gridley, MDL. RBN8, Capacity: 1-5/8”, Complete with Auto Bar Feed, Chip Conveyor,Machine Guards, S/N AM-40361

Traub MDL. A25 Screw Machine, With Lipe, MDL. 62-AML, Bar Feed, S/N 13054

GRINDERS & TOOL CUTTERS Blanchard Rotary Grinder, MDL. 22, 40 HP, 42" Diameter Table, Magnetic Chuck,S/N 12522

LaPointe Broach Grinder, 8-1/4” x 24” Magnetic Chuck, Allen Bradley AdjustableFrequency AC Motor Drive, 9” x 100” Table, 72” C.C., S/N 40004

LaPointe Broach Grinder, 8”x 24” Magnetic Chuck With Rectofier, 13”x 72” Table,Allen Bradley Adjustable AC Frequency Drive

Hybco Tool Grinder, MDL. 1900, S/N TG472, With Hybo, MDL. 210053, US Relief GrindingHead, S/N RF-2050

No 2 Cincinnati Tool and Cutter Grinder, 5-1/2”x 36” Table, S/N 1D2T5H-279

KO Lee Hydraulic Surface Grinder, MDL. S714H, 6 x 12 Chuck S/N 25729 XC

KO Lee Tool and Cutter Grinder, MDL. BA900, U.S. Work Head, 5C Collets

Robert Habib Grinder, MDL. F4, HA RO, Round Broach Grinder

1986 Kmbi-Schiff Tool Grinder, S/N D175-673-DB

Alexander Tool Grinder, MDL. 2CGC, With Coolant and Cabinet, S/N 2914N

EDM MACHINE Cincinnati Milacron Ram Type EDM (Cintrojet), MDL. 2240-S, Tank Size: 30"x 48"x 16-1/2"Deep, With Belmont Vacuum Filter System, S/N 4109J2075-0004

Cincinnati Milacron Horizontal Machining Center, Mdl. M1

CNC

Cincinnati Milacron Vertical Machining Center, MDL. 15VC-1000

CNC

2 available

3 available

Walter Helitronic 50 NC Tool Grinder

CNC

BORING, DRILLING, TAPPING MACHINES, PRESSES, HONING MACHINES, AUTOMATIC DRILLING MACHINE,DRILL PRESSES, VERTICAL BANDSAW, RADIAL ARM SAW, TABLE SAW, WELDERS,

ABRASIVE & BLAST EQUIPMENT, WASHERS & CLEANING SYSTEMS

BIDITUP AUCTIONS & APPRAISALS WORLDWIDEWWW.BIDITUP.COM

BORING, DRILLING, TAPPING MACHINES Kaufman 7 Head Twin Spindle Boring, Drilling & Tapping Machine, 60” Diameter Index,Chip Conveyor, 7-1/2 HP Heads, With Tooling, Complete Hydraulic, Shadow II LightCurtains, Allen Bradley PLC2/20 Controls, Allen Bradley Adjustable AC Motor Drive,S/N JN8517

Kaufman 6 Head Twin Spindle Drilling & Tapping Machine, 40” Diameter Index Table,With HyPneumat Automatic Drilling & Tapping, Allen Bradley PLD 2/20 ProgrammableControls, Chip Conveyor, 1 HP Heads, Complete Hydraulics, Shadow II Light Curtains,S/N S24E16-425

Kaufman Multi Head Boring, Drilling & Tapping Machine, (5) 5HP Twin Spindle Heads,60” Indexing Table, Chip Conveyors, Complete Hydraulic, Allen Bradley ConstantTorque 3HP AC Drive Controls, With Tooling

Kaufman Multi Head Boring, Drilling & Tapping Machine, 5 Twin Spindle Heads,60” Diameter Indexing Table, Chip Conveyors, 3 HP Heads, Complete Hydraulics, AllenBradley PLC2/20 Controls, With Tooling, S/N JN7922

PRESSES Steelweld Straight Side Double Crank Mechanical Press, MDL. JKP87254, 340 TonCapacity, 8” Stroke, 30 SPM, 57”x39” Bed Area, 8” Slide Adjustment, 21” Shut Height,8” Slide Adjustment, Equipped with Automatic Oiling System, Air Clutch, Brake,Counter-Balance, Surge Tank, Motorized Ram Adjustment, Electrics, Controls, S/N M09855(To be sold by photo, located in Davenport, IA)

(2) Imperial Stamping Machine, MDL. PR320, S/N 16131

HONING MACHINES Sunnen Precision Hone, MDL. MBB-1690, Power Stroking, S/N 90514

AUTOMATIC DRILLING MACHINE Accurate 16 Spindle Automatic Drilling Machine, With US Drill Head, 30 HP, ChipConveyor, With Built in Indexing Trunion, Tooling, S/N 113473

DRILL PRESSES Baker Multi Spindle Drill, MDL. 36HO, 9 Spindle with Built in Indexing Trunion, Tooling

Clausing Vertical Spindle Drill Press, MDL. 1788, S/N 533006

1989 MSL Single Spindle Vertical Drill, MDL. 951248, With Power Feed to Spindle,Coolant, S/N 189819C

Leland-Gifford Drill Press, Single Spindle, S/N LMS-1S-26-2126

Rockwell Single Spindle Drill, Catalog #17-600, S/N 1443843

VERTICAL BANDSAW DoAll Vertical Bandsaw, MDL. 1612-3, Variable Speed, Coolant, Air, Power Feed onTable, Blade Welder, 16” Throat Depth, S/N 152-69987

RADIAL ARM SAW DeWalt Radial Arm Saw, MDL. GAM/L No. 529, S/N 314969

TABLE SAW Delta 12” Table Saw

WELDERS Toho Friction Auto Welder, MDL. TH-FU35HW, Welding Capacity Round Bar 35mm,S/N 388071

Miller CP-750E, Constant Potentiol DC Power Source, 230-460 Volt, With Miller WireFeeder, S/N JC 612939

Miller MP65E, Constant Potential DC Arc, Welding Power Source, S/N JC 591663

ABRASIVE & BLAST EQUIPMENT Empire Abrasive Machine, MDL. IL-4860-CP, S/N E970-20, SP 500 Reliance AC VariableDrive, Allen Bradley PLC, Complete Reclamation System, With Torit Downflow DustCollector, MDL. DF2DF4, S/N IG346540-003, With Frohlich Vibritory Hopper & FeedSystem, Machine #86072, Size/MDL. 1850, Type: WSI, Year 1986, With Ultra Air DryingUnit, MDL. ED1, Twin Tank Design

1980 Wheelabrator Super Tumblast Unit, S/N A133300, With Wheelabrator Dust TubeCollector, S/N A133301, Complete With Charging Dump Hopper, Size: 7 cu. Ft.

Wheelabrator Super Tumblast Unit, S/N A125505, With Wheelabrator Dust Tube Collector,S/N A125506, With Charging Dump Hopper

WASHERS & CLEANING SYSTEMS 1996 Hurricane Parts Cleaning System, MDL. 5018W-R-B0, Stainless Steel, Opening12-1/2” x 17”; 18-1/2” long, Wash/Rinse/B-O (gas heat), S/N 43719

1976 Ipsen Washer, WRD-4-G, S/N 57010

Sweco Washer, Opening: 29”x 12”, 18’ long, S/N 2133

George Koch & Sons Multi Stage Washer, Opening: 40” x 8” x 23-1/2”, S/N 910-5500

Robert Habib Grinder, MDL. F4 LaPointe Broach Grinder

Kaufman Multi-Head Boring Machine KO Lee Hydr. SurfaceGrinder, MDL. S714H

KO Lee Tool and CutterGrinder, MDL. BA900

General Broach Dual Ram Lagun Twin Spindle Milling Machine

Steelweld Straight Side Double Crank MechanicalPress, MDL. JKP87254

Blanchard Rotary Grinder, MDL. 22

3 available

Acme-Gridley, MDL. RBN8 Kaufman 6 Head Twin SpindleDrilling & Tapping Machine

To be sold by photo, located in Davenport, IA

VIBRATORY FINISHING LINE, BUFFING & FINISHING, HEAT TREATING EQUIPMENT & FURNACES,PLATING LINE, BLACK OXIDE LINE, PACKAGING EQUIPMENT, TRASH COMPACTOR

TO SCHEDULE AN AUCTION OR APPRAISAL, CALL 818.508.7034

VIBRATORY FINISHING LINE (5) Sweco, MDL. FMD20HA, 10 HP, S/N 20FM1171-1, 20FM-1171-2, 20 FM-371-28,20FM973-17Automated Finishing Inc Vibratory Finishing Line

Sweco Roto-Finish Vibratory Finisher, MDL. FMD-20HA, 10 HP, S/N 20FM-872-38

Sweco Roto-Finish Vibratory Finisher, MDL. FMD20HA, 10 HP, S/N 20FM671-7

Automated Finishing Inc. Vibratory Finishing Line

Sweco Roto-Finish Vibratory Finisher

BUFFING & FINISHING Acme Polish & Finish, 66” Rotary Index, S/N 23643, 5 G4 left hand Heads: S/N 23649,23648, 23647, 23646, 23645, With Complete Room Type Enclosure by Acme, Built inExhaust Hood

Acme Twin Spindle Automatic Finishing Machine, With Trunion Type 52 Index RotaryType, S/N 22445, Belt Head: ABA74, S/N 22450, Belt Head: M-12, S/N 22448

Hammond Variable Speed Twin Spindle Buffing Machine (SEVERAL)

HEAT TREATING EQUIPMENT & FURNACES Ipsen Automatic Heat Treating Unit, MDL. T-2-4-ECMR, Chamber Size: 24"x 36"x 18"(2 Chambers), Maximum Input: 160 KW, Maximum Operating Temperature: 1850 °F,S/N 57910

Ipsen Automatic Heat Treating Unit, MDL. T-2-4-EMR, Chamber Size: 24"x 36"x 18"(2 Chambers), Maximum Input: 124 KW, Quench Tank Capacity: 1000 Gallons, MaximumTemperature: 1850 °F, S/N 57028

1976 Abar Ipsen Automatic Heat Treating Furnace, MDL. T-2-4-EMR, Chamber Size:24"x 36"x 18" (2 Chambers), Maximum Input: 124 KW, Quench Tank Capacity: 1000 Gallons,Maximum Input: 124 KW, Maximum Temperature: 1850 °F, S/N 57028

(9) Lindberg Electronic Super Cyclone Pit Furnaces, MDL. 12-RO-2548-17A, 12-RO-2546-E17,1750 °F, (6) 36" Diameter x 55" Deep, (2) 44" Diameter x 55" Deep

Industronics Heat Treating Furnace, MDL. 7022-1, Maximum Temperature: 2000°F, 45 KW,Electric, S/N 7562

(3) 1985 Ipsen Draw Furnace, MDL. DL-1-4-E, S/N 59390, 59391, 59392

Ipsen Automatic Heat Treating Furnace, MDL. T-8-1200 GM, Chamber Size: 24"x 36"x 18"(2 Chambers), Maximum Input: 1,400,000 BTU/HR, S/N55223

(4) Ipsen Automatic Heat Treating Unit, MDL. DLR-4-E, Chamber Size: 24"x 36"x 18",Maximum Input: 30KWH, Maximum Temperature: 1250 °F, S/N 57930, 57031, 57030,57929

(2) Ipsen, MDL. DLR-400 D-E, Chamber Size: 24"x 36"x 18", Maximum Input: 30 KWH/HR,S/N 55224, 55225

Ipsen Carbon Sensor Control System, MDL. Normal Temperature Range: 1600°F to 1900°F,S/N 57630

Ipsen Heat Treating Furnace, MDL. DLR-400E, S/N 55915

Ipsen Heat Treating Furnace, MDL. T4600-BGM, S/N 29481

Abar Ipsen, MDL. DR-UNLDR, S/N 55228

Blue M Oven, MDL. POM-166GX, Temperature Range: 316 °C/600 °F, With Chart Recorder,S/N P6-2526

Ipsen Endothermic Generator, MDL. G-1500-GS, S/N A.O. 57023

PLATING LINE Napco Nickel-Chromium Plating Line, MDL. RTM68-1, Machine was completely rebuiltwith new controls in the late 1990’s. All needed equipment (hangers, etc.) for thefunctioning of this line is with the line. There is also a large amount of spare parts withthis line. All tanks have been emptied and cleaned. Snap-On spent $650,000.00 on therebuild and retrofit. You have seen the quality of chrome on Snap-On tools; this is oneof the lines that they used to accomplish that kind of craftsmanship.

BLACK OXIDE LINE Good Black Oxide Line with Complete Hoist System for Dipping, Line CompletelyRebuilt and All New Controls Added in 1995, Machine has been cleaned out andappears to be in very good condition, Large Amount of Hangers, Etc. with this Line,MABRION Hoist System Added in 1995, Allen Bradley Controls

PACKAGING EQUIPMENT Auto Packaging Machine, MDL. J4, 240V/1 Phase/60 Cycle, S/N 1952

Auto Bag Bagging Machine, MDL. P1-100, With Extra Tooling, S/N 90-11P1209

TRASH COMPACTOR SP Industries Inc Trash Compaction System, MDL. CP2102, Fully Hydraulic, With2 Large Dump Trailers, Large Amounts of OTTO Poleythelyne Trash Recepticals, 2000 LBCapacity Side Mounted Dumper Assembly, S/N 97105324Sunnen Precision Hone,

MDL. MBB-1690WheelabratorEmpire Blast System

Black Oxide Line

1996 Hurricane Parts Cleaning System

Leland-Gifford Drill Press

Accurate Auto Drilling Machine

1996

Napco Nickel-Chromium Plating Line, MDL. RTM68-1

DoAll Vertical Bandsaw

DUST COLLECTOR, WASTE WATER TREATMENT EQUIPMENT, INSPECTION EQUIPMENT,MATERIAL HANDLING, FORKLIFTS/ROLLING STOCK, HYDRAULIC SHAPER, VERTICAL TAPPER,

RADIAL REVETING MACHINE, MISCELLANEOUS

BIDITUP AUCTIONS & APPRAISALS WORLDWIDEWWW.BIDITUP.COM

DUST COLLECTOR Dust Collection System

Ipsen Fan Units

WASTE WATER TREATMENT EQUIPMENT (All Waste Water Equipment is Very Clean and in Good Condition.)

1999 JWI Filter Press, MDL. 630G32-24-7DYLW, S/N F06732

1997 JWI Filter Press, MDL. 470G32-19-3MVLW, Large Amount of Pumps and MixingTanks, S/N F06007

Poly Blend Polymer Feed System, All Controls, S/N 3122

Poly Blend Polymer Feed System, All Controls, S/N 6738

1989 Sandborn/Donaldson UF Membrane System, MDL. UF1500-S, S/N MD89-350

INSPECTION EQUIPMENT 2001 OGP, Inc Vidicon Qualifier 866, MDL. VQ866, Stage Throat Clearance: 10” Maximum,8” Minimum, Travels: X Axis: 8”, Y Axis: 4.6”, Z Axis: 2.3”, Position Resolution: X Axis:.0001”, Y Axis: .0001”, Z Axis: .0005”, Maximum Table Load: 65 LBS, Maximum TravelTime (All Axis: 8 Seconds - Standard Resolution, 10 Seconds – High Resolution,S/N VQ866-037

Numerex Coordinate Measuring Machine, MDL. 2440-18 10 um/10um, MeasuringRange, X: 24”, Y: 28”, Z: 18”, Work Piece Capacity, X: 31.0”, Y: 40.0”, Z: 20.5”,Resolution: .00008”, Repeatability: +/- .00016”, Maximum Work Piece Weight: 1,000 lbs,3 Axis Digital Readout, Printer, PHC9 Renishaw MK2 Probe Head Control Unit, 4 KineticVibration Units on Machine, S/N CMM001000687

Brown & Sharpe Reflex Coordinate Measuring Machine, MDL. 454, Repeatability B89:0.00016”, Volumetric Accuracy B89: 0.0004 inch, Resolution: 0.0000025 inch, DisplayRange: +/- 999.99999”, Measuring Speed Maximum: 30 in/sec, Measuring Range:18”x 20”x 16”, Length: 40”, Width: 34.8”, Height: 62”, Maximum Part Weight: 500 lbs,Renishaw TPS Head, Renishaw PH6 Head, Renishaw P17 Probe Interface, S/N 0297-1544

DoAll in Granite Inspection Center, MDL. GBC-624, Grade: A, 24” Centers,S/N 9-415

J & L Comparator, 14” Screen, S/N E-37604

MATERIAL HANDLING Hansford Die Handler, MDL. 1020, 4000 IN. LB. Maximum Torque, 24 x 42” T-SlottedTable, S/N 684

FORKLIFTS/ROLLING STOCK Barett Electric Walk Behind Lift, MDL. PG-40-18-636, 4000 LB Capacity, S/N 26 11459

Clark Power Worker Lift, MDL. ST30B, 3000 LB Capacity, S/N: ST245-1573PM6235

Roc-Lift Die Handler, 2000 LB Capacity, MDL. PSTFL 20120, S/N P5321

Big Joe Electric Lift, MDL. 1518-A7, 1500 LB Capacity, S/N 57506

Barett Type E Electric Walk Behind Lift, MDL. TTG-40-TL, S/N 27-76282

Large Assortment of Forklift Charges

HYDRAULIC SHAPER Rockford 24” Hydraulic Shaper, With Vise, S/N 121HC52

VERTICAL TAPPER Snow Vertical Tapper, MDL.: 5-RM, S/N 36465

RADIAL RIVETING MACHINE Bracker Baltec Radial Riveting Machine, MDL. RN 380, Capacity: 4 to 20 mm, Stroke:5 to 50 mm, S/N 35 339

MISCELLANEOUS Radiac 10” Abrasive Cut-Off Saw

1988 Advance Hydro-Retriever, MDL. 260BHD, Walk Behind Floor Scrubber,S/N/302282

Rigid Pipe Threader, MDL. 400, With Tooling, S/N 040787

Kaeser, MDL. KRD 25, Compressed Air Dryer, S/N LR21776

(3) Toledo Scales, 1000 LBS

Toledo Scale, 2000 LBS

Frazier Storage Rack System with Trays, 108 Uprights Approximately 22’ Tall, All BoltedTogether for Easy Removal

Large Assortment of Powered & Unpowered Skate Conveyors

Large Assortment of Pallet Racking

Hansford Die Handler, MDL. 1020 Walk Behind Lifts

Blue M Oven, MDL. POM-166GX Abar Ipsen Brown & Sharpe ReflexCoordinate Measuring Machine

Auto Finish System Acme Twin Spindle Automatic Finishing Machine

Waste Water Treatment Numerex Coordinate Measuring Machine

BIDITUP AUCTIONS & APPRAISALS WORLDWIDEWWW.BIDITUP.COM

11426 Ventura BlvdSecond FloorStudio City, CA 91604Phone - 818.508.7034Fax - 818.508.3025info@biditup.comJames Stachurski, AuctioneerIL License #041000514

Hampton Inn(Approx. 11 Miles From Site)107 S. Richland Creek Dr.Princeton, IN812.385.2400

Days Inn(Approx. 11 Miles From Site) 2110 W. Broadway St.Princeton, IN812.386.1200

Best Western Windsor Oaks Inn(Approx. 18 Miles From Site)2200 S. Court St.Grayville, IL618.375.7930

TERMS & CONDITIONSSale Conducted by: biditup!, Subject to our customary terms of sale, (Available at the auction site on the day of the sale), and any and all amendments and modificationsannounced by the auctioneer at the time of the auction. The auctioneer and seller make no warranties or guarantees, expressed or implied, as to the defects in or the correct-ness or accuracy of the descriptions in any advertising of any item(s) being auctioned and will not be responsible for any advertising discrepancies or inaccuracies of any kind.All items sold will be on an “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”, basis “WITHOUT EXCEPTION” and “WITH REMOVAL AT BUYER’S RISK AND EXPENSE”. AUCTIONEERAND SELLER MAKE NO WARRANTIES OR GUARANTEES OF ANY KIND, EXPRESSED OR IMPLIED AS TO THE NATURE, QUALITY, VALUE OR CONDITION OF THE ITEM(S) BEING AUC-TIONED OR ITS (THEIR)SUITABILITY FOR ANY USE. AUCTIONEER AND SELLER EXPRESSLY AND SPECIFICALLY DISCLAIM WITHOUT LIMITATION ANY WARRANTY OF MER-CHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. AUCTIONEER SHALL NOT BE LIABLE FOR SPECIAL, CONSEQUENTIAL OR INCIDENTAL DAMAGES. It shall be the buyer’sobligation to verify information and descriptions of property prior to sale. biditup!, and its advertising agency assume no liability for errors or omissions in this brochure. Theauctioneer does not warrant the age,accuracy, genuineness, authenticity, description, weight, count or measure of any listings specified herein. Although it is not likely, auctionsales are subject to cancellation or postponement, and sometimes items are withdrawn from the sale, kindly contact biditup!, prior to travel as there will be no reimbursements.On the day of the sale, all successful bidders must immediately pay the full purchase price in cash, certified funds, cashiers check, wire transfer or company check with a let-ter from the buyer’s bank guaranteeing unqualified payments to biditup! This letter is valid until 30 working days after the auction sale.] Company checks without letter frombank guaranteeing unqualified payment will not be accepted. The failure to make payment promptly shall be considered default and each lot or lots so purchased will be placedfor resale. The buyer must pay the total invoice price for all the lots purchased before any removal can begin. All buyers must pay applicable sales tax (unless evidence ofexemption is provided to auctioneer’s satisfaction). Buyers are responsible for the transportation, associated costs and risks involved in the removal of purchased item(s).Certain items may contain residual chemicals and/or hazardous materials. The purchaser(s) hereby indemnify and hold harmless the auctioneer and seller from any and alldamages, claims or liability from any injuries to persons or property of any type whatsoever caused during the sale of, during the removal, or during use or operation of the pur-chased item(s). If you are unable to attend, please contact us regarding placing a proxy bid. PLEASE NOTE: ALL SALES ARE SUBJECT TO A BUYER'S PREMIUM.

LODGING

Please check for the most convenient route from your location to the sale site.AIRPORTS CLOSEST TO THE SALE SITE:Louisville International Standiford Field Airport SDF, Louisville, KY - 136.9 milesIndianapolis International Airport IND, Indianapolis, IN - 156.0 milesLambert St Louis International Airport STL, St Louis, MO - 163.7 milesNashville International Airport BNA, Nashville, TN - 194.2 milesChicago O'Hare International Airport ORD, Chicago, IL - 303.7 miles

AUCTIONTuesday, August 16th, 2005Beginning at 10:30 AM CDT

PREVIEWMonday, August 15th, 20059:00 AM to 4:00 PM CDT

LOCATION1200 West 7th StreetMt. Carmel, IL 62863, USA

DIRECTIONS

Assets No Longer Required in theContinuing Operations of LIVE ON-SITE

AUCTION

FEATURED AUCTION

UPCOMING AUCTIONSFORMERLY THE ASSETS OF REMEC INC.MAJOR WIRELESS COMMUNICATIONTEST EQUIPMENT AUCTIONLate Model, State of the Art WirelessCommunication Test & Measurement Equipment.On-line Auction – WWW.BIDITUP.COM Starts: Wednesday, July 27, 2005Ends: Wednesday, August 3, 2005

Assets No Longer Required in the Continuing Operations ofKLIPSCH AUDIO TECHNOLOGIESLate Model CNC Woodworking Facility Including,Holzher CNC Machining Center, Timesaver,Groovers, Profile Wrappers, Vacuum Press,Tenonners, Edge Foilers and BandersOn-line Auction – WWW.BIDITUP.COM Starts: Wednesday, August 17, 2005Ends: Friday, August 19, 2005

Assets No Longer Required byDUALEX, INC.A DIVISION OF DEPCO INTL.An Integral Source for Extruded Products AndPlastic Injection Molded PartsOn-Site AuctionWednesday, August 17, 2005Port Huron, MI USA

REAL ESTATE AUCTIONPort Huron, Michigan Building – 105,000 Sq. Ft.On-Site AuctionWednesday, August 17, 2005Port Huron, MI USA

Assets No Longer Required byUSA STAINLESS COMPANY, L.L.C.USA Stainless A Coil Processing Service CenterSpecializing In Precision Light Gauge, NarrowWidth, Ferrous And Non Ferrous High QualitySteel Banding, and StrappingOn-Site AuctionThursday, August 18, 2005Warren, MI USA

GODDARD ROTARY TOOL COMPANY, INC.Manufacturer of Solid Carbide Cutting Tools,Complete CNC Tool Cutter & Grinder FacilityOn-Site AuctionTuesday, August 23Escondido, CA USA

Assets No Longer Required in the ContinuingOperations ofDYNAMIC DETAILS, INC.World Class Manufacturer of PrintedCircuit BoardsOn-Site AuctionTuesday, August 30, 2005Tempe, AZ USA

Assets No Longer Required in the ContinuingOperations of SCIENTIFIC DIMENSIONS, INC.Complete Late Model CNC AmadaFabrication FacilityOn-Site AuctionThursday, September 14, 2005Albuquerque, NM USA

Assets No Longer Required in the Continuing Operations ofSNAP-ONWorld Famous Manufacturer of Hand and PowerTools, Diagnostics and Shop Equipment FeaturingCNC Machining, Machine Tools, PolishingEquipment, Plating Line and Rolling StockOn-Site AuctionTuesday, August 16, 2005Mt. Carmel, IL USA