92
24 /01/2011 SER METERIAL / EQUIPMENT DESCRIPTION MANUFACTURER FACTORY LOCATION Pre-Qualified Manufacturers By SEC REMARKS 1 POWER TRANSFORMERS 33KV & 34.5 KV PRIMARY 1 1 . POWER TRANSFORMERS UP TO 30 MVA 1. 1. 1 53-TMSS-01 Applicable Standards: SWEDEN Yes ABB United States-N/A Yes ABB ( T& D) SPAIN-Bilbao Yes Based on TS&SD letter# 09-F01546/03-03032301 dated 19th. Aug 2009, it is pre-qualified for Power Transformer up to 132kV, 100MVA as confirming to SEC specification # 53-TMSS-01, rev.0 with the following conditions: · All type, design, special & routine tests (including short circuit test) as per SEC specifications/standards shall be carried out on the first unit to be supplied to SEC in securing an order in the presence of three (3) SEC engineers & one (1) approved independent inspection agency Inspector. · Seven (7) years warranty from the date of PAC of the turnkey project in case of contract award or date of delivery in case of direct material supply order. ABB Bilbao TURKEY-Istanbul Yes Pre-Qualification & Participation for current & future SEC's Projects subjected to the mutual agreement between SEC & ABB dated 09 March 2009 ABB Elektrik Sanayi A.S. [previously ABB ESAS] FINLAND Yes ABB TRANSIT OY GERMANY Yes AREVA TURKEY Yes AREVA TURKEY Yes Complete Type, Routine / Sample tests for first order & 10 Years Warranty from the date of PAC is required. BEST BELGIUM Yes CG POWER SYSTEMS INDIA Yes SUSPENDED FOR SEC 2005 PROJECTS AND ONWARD CROMPTON GREAVES JAPAN-OSAKA Yes DAIHEN CORPORATION United Kingdom Yes HAWKER SIDDELEY Page 1 of 92

List of Approverd Manufacturers

  • Upload
    amohid17

  • View
    1.549

  • Download
    33

Embed Size (px)

Citation preview

24 /01/2011

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

1 POWER TRANSFORMERS

33KV & 34.5 KV PRIMARY11 .

POWER TRANSFORMERS UP TO 30 MVA1. 1. 1 53-TMSS-01Applicable Standards:

SWEDEN YesABB

United States-N/A YesABB ( T& D)

SPAIN-Bilbao Yes Based on TS&SD letter# 09-F01546/03-03032301 dated 19th. Aug 2009, it is pre-qualified for Power Transformer up to 132kV, 100MVA as confirming to SEC specification # 53-TMSS-01, rev.0 with the following conditions:

· All type, design, special & routine tests (including short circuit test) as per SEC specifications/standards shall be carried out on the first unit to be supplied to SEC in securing an order in the presence of three (3) SEC engineers & one (1) approved independent inspection agency Inspector.

· Seven (7) years warranty from the date of PAC of the turnkey project in case of contract award or date of delivery in case of direct material supply order.

ABB Bilbao

TURKEY-Istanbul Yes Pre-Qualification & Participation for current & future SEC's Projects subjected to the mutual agreement between SEC & ABB dated 09 March 2009

ABB Elektrik Sanayi A.S. [previously ABB ESAS]

FINLAND YesABB TRANSIT OY

GERMANY YesAREVA

TURKEY YesAREVA

TURKEY Yes Complete Type, Routine / Sample tests for first order & 10 Years Warranty from the date of PAC is required.

BEST

BELGIUM YesCG POWER SYSTEMS

INDIA Yes SUSPENDED FOR SEC 2005 PROJECTS AND ONWARDCROMPTON GREAVES

JAPAN-OSAKA YesDAIHEN CORPORATION

United Kingdom YesHAWKER SIDDELEY

Page 1 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

KOREA, Republic of-Changwon YesHYOSUNG (HICO)

KOREA, Republic of-Ulsan YesHYUNDAI

JAPAN YesJAPAN AE POWER SYSTEMS CORP.

FRANCE YesJEUMONT SCHNEIDER

JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.MITSUBISHI

GERMANY YesSCHORCH

GERMANY-NURNBERG YesSIEMENS AG (NURNBERG)

AUSTRIA- WEIZ YesSIEMENS TRANSFORMERS AUSTRIA GMBH & CO KG

JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.TOSHIBA CORPORATION, T&D

AUSTRALIA-MELBOURNE YesWILSON TRANSF

22Total =

69 KV PRIMARY21 .

POWER TRANSFORMERS UP TO 67 MVA1. 2. 1 53-TMSS-01Applicable Standards:

SWITZERLAND YesABB

SWEDEN YesABB

United States-N/A YesABB ( T& D)

SPAIN-Bilbao Yes Based on TS&SD letter# 09-F01546/03-03032301 dated 19th. Aug 2009, it is pre-qualified for Power Transformer up to 132kV, 100MVA as confirming to SEC specification # 53-TMSS-01, rev.0 with the following conditions:

· All type, design, special & routine tests (including short circuit test) as per SEC specifications/standards shall be carried out on the first unit to be supplied to SEC in securing an order in the presence of three (3) SEC engineers & one (1) approved independent inspection agency Inspector.

· Seven (7) years warranty from the date of PAC of the turnkey project in case of contract award or date of delivery in case of direct material supply order.

ABB Bilbao

TURKEY-Istanbul Yes Pre-Qualification & Participation for current & future SEC's Projects subjected to the mutual agreement between SEC & ABB dated 09 March 2009

ABB Elektrik Sanayi A.S. [previously ABB ESAS]

FINLAND YesABB TRANSIT OY

GERMANY YesAREVA

Page 2 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

TURKEY YesAREVA

TURKEY Yes Complete Type, Routine / Sample tests for first order & 10 Years Warranty from the date of PAC is required.

BEST

BELGIUM YesCG POWER SYSTEMS

JAPAN-OSAKA YesDAIHEN CORPORATION

PORTUGAL YesEFACEC

KOREA, Republic of-Changwon YesHYOSUNG (HICO)

KOREA, Republic of-Ulsan YesHYUNDAI

JAPAN YesJAPAN AE POWER SYSTEMS CORP.

FRANCE YesJEUMONT SCHNEIDER

Croatia/Hrvatska Yes Limited to 40 MVA Only. Complete Type, Routine / Sample tests for first order & 10 Years Warranty from the date of PAC is required.

KONCAR D&ST

JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.MITSUBISHI

GERMANY-Dresden Yes based on TS&SD letter# 09-01501-03032301 dated 25th May 2009 , Siemens AG from Germany-Dresden for Power Transformer up to 230kV, 200MVA as confirming to SEC specification # 53-TMSS-01, rev.0 & 53-TMSS-02, rev.0 with the following conditions:• All type, special & routine tests for each voltage class as per SEC specifications/standards shall be carried out on the first batch to be supplied to SEC in securing an order in the presence of three (3) SEC engineers & one (1) approved independent inspection agency Inspector. • Ten (10) years warranty from the date of PAC of the turnkey project in case of contract award or date of delivery in case of direct material supply order.

Siemens AG (Dresden)

GERMANY-NURNBERG YesSIEMENS AG (NURNBERG)

AUSTRIA- WEIZ YesSIEMENS TRANSFORMERS AUSTRIA GMBH & CO KG

ITALY YesTAMINI

JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.TOSHIBA CORPORATION, T&D

AUSTRALIA-MELBOURNE YesWILSON TRANSF

24Total =

110 KV TO 132 KV PRIMARY31 .

POWER TRANSFORMERS UP TO 100 MVA1. 3. 1 53-TMSS-01Applicable Standards:

Page 3 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

SWITZERLAND YesABB

SWEDEN YesABB

United States-N/A YesABB ( T& D)

SPAIN-Bilbao Yes Based on TS&SD letter# 09-F01546/03-03032301 dated 19th. Aug 2009, it is pre-qualified for Power Transformer up to 132kV, 100MVA as confirming to SEC specification # 53-TMSS-01, rev.0 with the following conditions:

· All type, design, special & routine tests (including short circuit test) as per SEC specifications/standards shall be carried out on the first unit to be supplied to SEC in securing an order in the presence of three (3) SEC engineers & one (1) approved independent inspection agency Inspector.

· Seven (7) years warranty from the date of PAC of the turnkey project in case of contract award or date of delivery in case of direct material supply order.

ABB Bilbao

TURKEY-Istanbul Yes Pre-Qualification & Participation for current & future SEC's Projects subjected to the mutual agreement between SEC & ABB dated 09 March 2009

ABB Elektrik Sanayi A.S. [previously ABB ESAS]

FINLAND YesABB TRANSIT OY

GERMANY YesAREVA

TURKEY YesAREVA

TURKEY Yes Complete Type, Routine / Sample tests for first order & 10 Years Warranty from the date of PAC is required.

BEST

BELGIUM YesCG POWER SYSTEMS

INDIA Yes SUSPENDED FOR SEC 2005 PROJECTS AND ONWARD.CROMPTON GREAVES

JAPAN-OSAKA YesDAIHEN CORPORATION

PORTUGAL YesEFACEC

United Kingdom YesHAWKER SIDDELEY

KOREA, Republic of-Changwon YesHYOSUNG (HICO)

KOREA, Republic of-Ulsan YesHYUNDAI

JAPAN YesJAPAN AE POWER SYSTEMS CORP.

FRANCE YesJEUMONT SCHNEIDER

Croatia/Hrvatska Yes Limited to 40 MVA Only. Complete Type, Routine / Sample tests for first order & 10 Years Warranty from the date of PAC is required.

KONCAR D&ST

JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.MITSUBISHI

JAPAN YesNISSIN ELECTRIC

Page 4 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

GERMANY-Dresden Yes based on TS&SD letter# 09-01501-03032301 dated 25th May 2009 , Siemens AG from Germany-Dresden for Power Transformer up to 230kV, 200MVA as confirming to SEC specification # 53-TMSS-01, rev.0 & 53-TMSS-02, rev.0 with the following conditions:• All type, special & routine tests for each voltage class as per SEC specifications/standards shall be carried out on the first batch to be supplied to SEC in securing an order in the presence of three (3) SEC engineers & one (1) approved independent inspection agency Inspector. • Ten (10) years warranty from the date of PAC of the turnkey project in case of contract award or date of delivery in case of direct material supply order.

Siemens AG (Dresden)

GERMANY-NURNBERG YesSIEMENS AG (NURNBERG)

AUSTRIA- WEIZ YesSIEMENS TRANSFORMERS AUSTRIA GMBH & CO KG

JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.TOSHIBA CORPORATION, T&D

AUSTRALIA-MELBOURNE YesWILSON TRANSF

26Total =

230 KV PRIMARY41 .

POWER TRANSFORMERS UP TO 400 MVA1. 4. 1 53-TMSS-02Applicable Standards:

SWEDEN YesABB

United States-N/A YesABB ( T& D)

SPAIN-Cordoba Yes Based on TS&SD letter# 09-F011657/03-03032301 dated 16th. Aug 2009, it is pre-qualiafied for Power Transformer up to 380kV, 500MVA as confirming to SEC specification # 53-TMSS-02, rev.0 with the following conditions:• All type, design, special & routine tests (including short circuit test) as per SEC specifications/standards shall be carried out on the first unit to be supplied to SEC in securing an order in the presence of three (3) SEC engineers & one (1) approved independent inspection agency Inspector. • Seven (7) years warranty from the date of PAC of the turnkey project in case of contract award or date of delivery in case of direct material supply order.

ABB Cordoba

GERMANY YesAREVA

TURKEY YesAREVA

BELGIUM YesCG POWER SYSTEMS

JAPAN-OSAKA YesDAIHEN CORPORATION

Page 5 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

United Kingdom YesHAWKER SIDDELEY

KOREA, Republic of-Changwon Yes Based on TS&SD fax#09-F01255/02-03032301 dated 25th. July 2009, it is pre-qualified for Power Transformer up to 380kV, 500MVA as confirming to SEC specification # 53-TMSS-02, rev.0 with the following conditions:• All type, design, special & routine tests as per SEC specifications/standards shall be carried out on the first batch to be supplied to SEC in securing an order in the presence of three (3) SEC engineers & one (1) approved independent inspection agency Inspector. • Seven (7) years warranty from the date of PAC of the turnkey project in case of contract award or date of delivery in case of direct material supply order.

HYOSUNG (HICO)

KOREA, Republic of-Ulsan YesHYUNDAI

JAPAN YesJAPAN AE POWER SYSTEMS CORP.

JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.MITSUBISHI

GERMANY-Dresden Yes based on TS&SD letter# 09-01501-03032301 dated 25th May 2009 , Siemens AG from Germany-Dresden for Power Transformer up to 230kV, 200MVA as confirming to SEC specification # 53-TMSS-01, rev.0 & 53-TMSS-02, rev.0 with the following conditions:• All type, special & routine tests for each voltage class as per SEC specifications/standards shall be carried out on the first batch to be supplied to SEC in securing an order in the presence of three (3) SEC engineers & one (1) approved independent inspection agency Inspector. • Ten (10) years warranty from the date of PAC of the turnkey project in case of contract award or date of delivery in case of direct material supply order.

Siemens AG (Dresden)

GERMANY-NURNBERG YesSIEMENS AG (NURNBERG)

AUSTRIA- WEIZ YesSIEMENS TRANSFORMERS AUSTRIA GMBH & CO KG

JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.TOSHIBA CORPORATION, T&D

AUSTRALIA-MELBOURNE Yes UP TO 100 MVA ONLYWILSON TRANSF

17Total =

380KV PRIMARY51 .

POWER TRANSFORMERS UP TO 500 MVA1. 5. 1 53-TMSS-02Applicable Standards:

SWEDEN YesABB

United States-N/A YesABB ( T& D)

Page 6 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

SPAIN-Cordoba Yes Based on TS&SD letter# 09-F011657/03-03032301 dated 16th. Aug 2009, it is pre-qualiafied for Power Transformer up to 380kV, 500MVA as confirming to SEC specification # 53-TMSS-02, rev.0 with the following conditions:• All type, design, special & routine tests (including short circuit test) as per SEC specifications/standards shall be carried out on the first unit to be supplied to SEC in securing an order in the presence of three (3) SEC engineers & one (1) approved independent inspection agency Inspector. • Seven (7) years warranty from the date of PAC of the turnkey project in case of contract award or date of delivery in case of direct material supply order.

ABB Cordoba

GERMANY YesAREVA

TURKEY Yes First Unit to be Type Tested in the presence of 3 SEC Engineers & 1 SEC approved Independent Inspector; Extended Warranty of Six years.

AREVA

BELGIUM YesCG POWER SYSTEMS

United Kingdom YesHAWKER SIDDELEY

KOREA, Republic of-Changwon Yes Based on TS&SD fax#09-F01255/02-03032301 dated 25th. July 2009, it is pre-qualified for Power Transformer up to 380kV, 500MVA as confirming to SEC specification # 53-TMSS-02, rev.0 with the following conditions:• All type, design, special & routine tests as per SEC specifications/standards shall be carried out on the first batch to be supplied to SEC in securing an order in the presence of three (3) SEC engineers & one (1) approved independent inspection agency Inspector. • Seven (7) years warranty from the date of PAC of the turnkey project in case of contract award or date of delivery in case of direct material supply order.

HYOSUNG (HICO)

KOREA, Republic of-Ulsan YesHYUNDAI

JAPAN YesJAPAN AE POWER SYSTEMS CORP.

JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.MITSUBISHI

GERMANY-NURNBERG YesSIEMENS AG (NURNBERG)

AUSTRIA- WEIZ YesSIEMENS TRANSFORMERS AUSTRIA GMBH & CO KG

JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.TOSHIBA CORPORATION, T&D

14Total =

2 PAD MOUNTED DISTRIBUTION TRANSFORMERS

13.8 KV, 33KV & 34.5 KV PRIMARY12 .

Page 7 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

DIST. TRANSFORMERS UP TO 2 MVA2. 1. 1 51-TMSS-01Applicable Standards:

Saudi Arabia-RIYADH YesABB

United Arab Emirates-ABU DHABI Yes UP TO 1.5 MVAFEDERAL TRANSFORMERS CO.

Croatia/Hrvatska Yes UP TO 2.5 MVA. Complete Type, Routine / Sample tests for first order & 10 Years Warranty from the date of PAC is required.

KONCAR D&ST

Saudi Arabia-DAMMAM Yes UP TO 13.8 KV ONLYSAUDI TRANSFORMERS CO.

Saudi Arabia-Riyadh YesUnited Transformers Electric Co. (UTEC)

Saudi Arabia-DAMMAM Yes UP TO 13.8 KV ONLYWESCOSA

6Total =

3 PAD MOUNTED GROUNDING TRANSFORMERS UP TO 2 MVA

13.8 KV, 33KV & 34.5 KV PRIMARY13 .

GROUNDING TRANSFORMERS3. 1. 1 52-TMSS-01Applicable Standards:

--- Yes ALL APPROVED POWER TRANSFOREMER MANUFACTURERS, EXCEPT DISTRIBUTION TRANSFORMER MANUFACTURERS ARE ALSO ACCEPTABLE FOR GROUNDING TRANSFORMERS

*

United States YesABB

Saudi Arabia-RIYADH YesABB

ITALY YesABB ( T& D)

SWITZERLAND-GENEVA YesABB SECHERON

BELGIUM YesCG POWER SYSTEMS

INDIA Yes SUSPENDED FOR SEC 2005 PROJECTS AND ONWARDCROMPTON GREAVES

KOREA, Republic of-Changwon YesHYOSUNG (HICO)

KOREA, Republic of-Ulsan YesHYUNDAI

9Total =

4 DRY TYPE TRANSFORMERS

36 KV PRIMARY14 .

36 KV PRIMARY4. 1. 0 Applicable Standards:

Saudi Arabia YesABB/AEIL

Page 8 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

GERMANY YesSIEMENS

Saudi Arabia-DAMMAM YesWESCOSA

3Total =

5 COMPACT SUBSTATION

69KV PRIMARY, 13.8 KV OR 34.5 KV SECONDARY15 .

UNIT SUBSTATION, 69KV PRIMARY, 13.8 KV OR 34.5 KV SECONDARY5. 1. 1 Applicable Standards:

SWITZERLAND-GENEVA YesABB (BBC SECHERON)

BELGIUM YesCG POWER SYSTEMS

2Total =

110-132 KV PRIMARY, 13.8 KV OR 34.5 KV SECONDARY25 .

UNIT SUBSTATION, 110 - 132 KV PRIMARY, 13.8 KV OR 34.5 KV SECONDARY5. 2. 1 Applicable Standards:

United States-N/A YesABB ( T& D)

1Total =

6 REACTOR

OIL IMMERSED REACTORS16 .

33 KV TO 69 KV OIL IMMERSED REACTORS6. 1. 1 58-TMSS-01Applicable Standards:

SWEDEN YesABB

TURKEY YesAREVA

FRANCE-(ST. QUEN) YesAREVA_(ST. QUEN)

Page 9 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

KOREA, Republic of-Ulsan Yes Based on TS&SD Letter # 10-02438-02-03032301 dated 31/08/2010, it is pre-qualified for Shunt Reactor as confirming to SEC specification # 58-TMSS-01, Rev.0 with the following conditions:

• All type/special, routine& sample tests for Shunt Reactors on one unit of each rating supplied to SEC shall be conducted at Manufacturer's Testing Laboratory in the presence of three (3) SEC engineers & one (1) SEC approved independent inspection agency Inspector, all the related costs for witnessing the tests will be borne by the manufacturer. This was confirmed by HHI –Korea through letter # S370-1007-052 dated 05/07/2010.

• Ten (10) years extended warranty for the proposed Shunt Reactors from the date of PAC of the turnkey project in case of contract award or date of delivery in case of direct material supply order. This was confirmed by HHI –Korea through letter # S370-1008-0182 dated 18/08/2010.

HYUNDAI

JAPAN YesJAPAN AE POWER SYSTEMS CORP.

JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.MITSUBISHI

GERMANY-NURNBERG YesSIEMENS AG (NURNBERG)

AUSTRIA- WEIZ YesSIEMENS TRANSFORMERS AUSTRIA GMBH & CO KG

JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.TOSHIBA CORPORATION, T&D

9Total =

110 KV TO 132 KV REACTORS6. 1. 2 58-TMSS-01Applicable Standards:

SWEDEN YesABB

United States-N/A YesABB ( T& D)

TURKEY YesAREVA

FRANCE-(ST. QUEN) YesAREVA_(ST. QUEN)

Page 10 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

KOREA, Republic of-Ulsan Yes Based on TS&SD Letter # 10-02438-02-03032301 dated 31/08/2010, it is pre-qualified for Shunt Reactor as confirming to SEC specification # 58-TMSS-01, Rev.0 with the following conditions:

• All type/special, routine& sample tests for Shunt Reactors on one unit of each rating supplied to SEC shall be conducted at Manufacturer's Testing Laboratory in the presence of three (3) SEC engineers & one (1) SEC approved independent inspection agency Inspector, all the related costs for witnessing the tests will be borne by the manufacturer. This was confirmed by HHI –Korea through letter # S370-1007-052 dated 05/07/2010.

• Ten (10) years extended warranty for the proposed Shunt Reactors from the date of PAC of the turnkey project in case of contract award or date of delivery in case of direct material supply order. This was confirmed by HHI –Korea through letter # S370-1008-0182 dated 18/08/2010.

HYUNDAI

JAPAN YesJAPAN AE POWER SYSTEMS CORP.

JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.MITSUBISHI

GERMANY-NURNBERG YesSIEMENS AG (NURNBERG)

AUSTRIA- WEIZ YesSIEMENS TRANSFORMERS AUSTRIA GMBH & CO KG

JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.TOSHIBA CORPORATION, T&D

10Total =

230 KV OIL IMMERSED REACTORS6. 1. 3 58-TMSS-01Applicable Standards:

SWEDEN YesABB

United States-N/A YesABB ( T& D)

TURKEY YesAREVA

FRANCE-(ST. QUEN) YesAREVA_(ST. QUEN)

Page 11 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

KOREA, Republic of-Ulsan Yes Based on TS&SD Letter # 10-02438-02-03032301 dated 31/08/2010, it is pre-qualified for Shunt Reactor as confirming to SEC specification # 58-TMSS-01, Rev.0 with the following conditions:

• All type/special, routine& sample tests for Shunt Reactors on one unit of each rating supplied to SEC shall be conducted at Manufacturer's Testing Laboratory in the presence of three (3) SEC engineers & one (1) SEC approved independent inspection agency Inspector, all the related costs for witnessing the tests will be borne by the manufacturer. This was confirmed by HHI –Korea through letter # S370-1007-052 dated 05/07/2010.

• Ten (10) years extended warranty for the proposed Shunt Reactors from the date of PAC of the turnkey project in case of contract award or date of delivery in case of direct material supply order. This was confirmed by HHI –Korea through letter # S370-1008-0182 dated 18/08/2010.

HYUNDAI

JAPAN YesJAPAN AE POWER SYSTEMS CORP.

JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.MITSUBISHI

GERMANY-NURNBERG YesSIEMENS AG (NURNBERG)

AUSTRIA- WEIZ YesSIEMENS TRANSFORMERS AUSTRIA GMBH & CO KG

JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.TOSHIBA CORPORATION, T&D

10Total =

380 KV OIL IMMERSED REACTORS6. 1. 4 58-TMSS-01Applicable Standards:

SWEDEN YesABB

United States-N/A YesABB ( T& D)

FRANCE-(ST. QUEN) YesAREVA_(ST. QUEN)

Page 12 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

KOREA, Republic of-Ulsan Yes Based on TS&SD Letter # 10-02438-02-03032301 dated 31/08/2010, it is pre-qualified for Shunt Reactor as confirming to SEC specification # 58-TMSS-01, Rev.0 with the following conditions:

• All type/special, routine& sample tests for Shunt Reactors on one unit of each rating supplied to SEC shall be conducted at Manufacturer's Testing Laboratory in the presence of three (3) SEC engineers & one (1) SEC approved independent inspection agency Inspector, all the related costs for witnessing the tests will be borne by the manufacturer. This was confirmed by HHI –Korea through letter # S370-1007-052 dated 05/07/2010.

• Ten (10) years extended warranty for the proposed Shunt Reactors from the date of PAC of the turnkey project in case of contract award or date of delivery in case of direct material supply order. This was confirmed by HHI –Korea through letter # S370-1008-0182 dated 18/08/2010.

HYUNDAI

JAPAN YesJAPAN AE POWER SYSTEMS CORP.

JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.MITSUBISHI

GERMANY-NURNBERG YesSIEMENS AG (NURNBERG)

AUSTRIA- WEIZ YesSIEMENS TRANSFORMERS AUSTRIA GMBH & CO KG

JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.TOSHIBA CORPORATION, T&D

9Total =

AIR CORE SERIES REACTOR26 .

230 KV AIR CORE SERIES REACTORS6. 2. 1 58-TMSS-02Applicable Standards:

--- Yes ALL POWER TRANSFORMER AND OIL IMMERSED REACTOR MANUFACTURERS ARE ACCEPTABLE TO SUPPLY AIR CORE SERIES REACTORS FROM 13.8KV TO 230 KV

*

Page 13 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

AUSTRIA-Leonding, Linz Yes Based on TS&SD letter 10-01317-1-03032301 dated May 10, 2010. TRENCH AUSTRIA GMBH is pre-qualified for Air Core Series Reactors as confirming to SEC Specification 58-TMSS-02, Rev.0 with the following conditions:• Extended Warranty: Seven (7) years Extended Warranty shall be applicable for the Air Core Series Reactors to be supplied to SEC by TRENCH AUSTRIA GMBH as confirmed through their letter # NIL dated April 28, 2010. • Test Witnessing: Factory Tests on the first batch of Reactors to be supplied to Contract # 10931162/00 and Contract # 10931163/00 for Dynamic Reactive Power Compensation Projects in Central Operating Area shall be conducted in presence of three (3) SEC Engineers and one (1) IIA Inspector, under the sole expense of the Manufacturer as confirmed through their Letter Letter # NIL dated April 28, 2010.

TRENCH AUSTRIA GMBH

CANADA-Scarborough, Ontario Yes Based on TS&SD letter 10-01317-1-03032301 dated May 10, 2010. TRENCH CANADA is pre-qualified for Air Core Series Reactors as confirming to SEC Specification 58-TMSS-02, Rev.0 with the following conditions:• Extended Warranty: Seven (7) years Extended Warranty shall be applicable for the Air Core Series Reactors to be supplied to SEC by TRENCH CANADA as confirmed through their letter # NIL dated April 28, 2010. • Test Witnessing: Factory Tests on the first batch of Air Core Series Reactors to be supplied to Contract # 20931030/00 for Taif BSP & Kayber/Bawat S/S shall be conducted in presence of three (3) SEC Engineers and one (1) IIA Inspector, under the sole expense of the Manufacturer as confirmed through their Letter # NIL dated April 27, 2010. • Free Replacement: TRENCH CANADA shall supply one complete three phase set of Reactors (3 units) to SEC (Tabouk City) free of charge as already confirmed through their letter # NIL dated November 06, 2009.

TRENCH CANADA

3Total =

AIR CORE REACTORS36 .

230 KV AIR CORE REACTORS6. 3. 1 52-TMSS-02,58-TMSS-02Applicable Standards:

BELGIUM YesALSTOM (T & D) BALTEAU SA (NV)

United Arab Emirates-Abu Dhabi Yes Limited to 34.5kV Only; First unit of 34.5kV Air Core Reactor shall be type tested in an independent lab. in the presence of 3 SEC Engineers & 1 SEC Approved Independent Inspection Agency; 10 years of Extended Warranty.

Power Economy Middle East Co.

2Total =

Page 14 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

7 SWITCHGEARS

METAL CLAD SWITCHGEARS17 .

13.8 KV UP TO 34.5 KV7. 1. 1 32-TMSS-01Applicable Standards:

United States-N/A YesABB ( T& D)

Saudi Arabia Yes For 33kV AIS:classic ZS3 type with current rating up to 2500A@ 40oC; CB type VD43620-25(2000A), VD43612-25(1250A & 800A); ES type EK5, 3007N280.For 13.8kV AIS:New version: Unigear ZS1 type with current rating 3003A @ 40oC & 60Hz with CB type VD4 1731-25 (2500A), VD4 1706-20(400A), VD4 1712-20(800A), VD4 1716-20 (1250A) , EMBEDDED POLE, INTERUPTER TYPE VG4 FOR 630/1200A, VG4/S FOR 1600A/2500A AND VG6 FOR 3150A; ES type EK6, ABB EJF MAKE CZECH.Old version: Classic ZS1 with current rating

ABB/AEIL

GERMANY-CALOR EMAG YesABB-CALOR EMAG

Saudi Arabia-JEDDAH Yes For 13.8kV AIS:type 8BK20 with CB type 3AH.for 33kV AIS: type 8BT2 is not acceptable, as the VT is situated in a separate compartment and connected by cable.

AEL -SIEMENS

Saudi Arabia-RIYADH Yes Based on TS&SD letter# 09-02613-01-03032301 dated 13th September 2009, ALFANAR ELECTRICAL SYSTEMS from Saudi Arabia-Riyadh for 13.8kV Switchgear type NES-H with degree protection IP4X; vacuum CB (rating 3150A & 1250A) and ES from LSIS (South Korea) - details of types are mentioned in the TS&SD letter; as confirming to SEC specification # 32-TMSS-01, rev.0 with the following condition:• Ten (10) years warranty from the date of PAC of the turnkey project in case of contract award or date of delivery in case of direct material supply order.

ALFANAR ELECTRICAL SYSTEMS

FRANCE-(MACON CEDEX 9) YesAREVA (MACON CEDEX 9)

PORTUGAL YesEFACEC

Page 15 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

Poland-Konin Yes based on TS&SD letter# 09-01092-03032301 dated 18th. April 2009 it is prequalified for for 13.8kV Air Insulated Switchgear type D-17P with SCC of 25kA/3sec, degree of protection IP4X and rated current of 3000A @ 40oC, 60Hz; CB type VD4 which approved by SEC from ABB-Germany (3000A) & ABB-Italy (2500A); ES type UMR from ELECTROBUDOWA SA-Poland as confirming to SEC specification # 32-TMSS-01, rev.0 with Ten (10) years warranty from the date of PAC of the Turnkey project in case of contract award or date of delivery in case of direct material supply order.

ELEKTROBUDOWA SA

Saudi Arabia-RIYADH Yes For 13.8kV AIS:Pre-qualified since 24/02/1420H for 13.8kV SWG type MC-Set with CB type LF3-3150-(2500A), LF2- 2500 (2000A), LF2-1250 (800A), LF2-630 (400A) and warranty of (7)years from commissioning date of the first delivery for any onward project or order in the first two years and then shall be (3)years from PAC.for 33kV AIS:Based on TS&SD fax ref.#09-00073-2-03032301 dated 04/02/2009. Pre-Qualified for 34.5 kV SWG type (F400NL)1250/2500 A @40C &60Hz with IP4X,SF6 CB type SF2(France),ES type TFCM(France), & (10)years warranty.old version:33kV AIS type F400G with current rating up to 2500A @ 40oC with CB type SF & SF2

EPS LTD. (GROUPE SCHNEIDER)

JAPAN YesJAPAN AE POWER SYSTEMS CORP.

Croatia/Hrvatska Yes LIMITED TO DTA ONLY; FOR CTA PREQUALIFICATION UNDER PROGRESS

KONCAR

JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.MITSUBISHI

United States Yes SWITCHGEAR NOT YET TYPE TESTEDPOWER CON

United States YesS & C

United States YesSIEMENS

JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.TOSHIBA CORPORATION, T&D

FRANCE YesVA TECH

Saudi Arabia-DAMMAM YesWESCOSA

18Total =

110 KV TO 132 KV GIS7. 1. 2 32-TMSS-02Applicable Standards:

GERMANY Yes 145kV GIS type ELK-04 with CB type ELK-SW04Hydraulic spring mechanism; DS type ELK-TE0 (3 POS), MES type ELK-TE0 (3 POS)/ TE03-DR04; HES type ELK-EB03

ABB

SWITZERLAND YesABB

Page 16 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

FRANCE-(AIX-LES BAINS) Yes New version:145kV GIS type B65 with CB type B65-CBMotor spring mechanism; DS type B65-DS; ES type B65-ES.Old version:145kV GIS type B95 with CB type BHG 112, Motor spring mechanism; DS Bt212; ES type BE212

AREVA (AIX-LES BAINS)

SWITZERLAND-Oberentfelden Yes 145kV GIS type B65 with CB type B65-CBMotor spring mechanism; DS type B65-DS; ES type B65-ES; HES type B65-EF.

AREVA T&D AG

KOREA, Republic of-Changwon Yes New Model approved on 10-04-2007, Model Type HSG-144A 145KV GIS with CB type HCSP-144AMotor spring mechanism; DS type HDMO-144A; MES type HDMO-144A, HES type HEMS-144A.All Type and Design tests have been carried out completely & accepted as mentioned in TS&SD letter#08-F02926-03032301 dated 22/11/2008.Provide extended Guarantee/Warranty for Seven(7) Years from the date of PACOld version: 145kV GIS type 145HGS40 with CB type 145HCB,145PL40; DS type 145SDSV/SDSH; MES type 145SESM; HES type 145SESA

HYOSUNG (HICO)

KOREA, Republic of-Ulsan Yes New version: 145kV GIS type 145SP-1 with CB type 145SP-K1Motor spring mechanism; BDS type 145SP-3PS1; LDS type 145SP-3PS2; MES type 145-3PS2; HES type 145SP-LES2.Old version: 145kV GIS type 145SP with CB type 145SP-K Hydraulic mechanism; DS type 145SP-DS; MES type 145SP-ES; HES type 145SP-LES

HYUNDAI

JAPAN Yes New version: 145kV GIS type CFTA with CB type CFPT-120-40L, FAR3 Motor spring mechanism; DS type CFL-120; ES type CFL-120.Old version: 145kV GIS type CFT with CB type CFPT-140-40L, FAR3,C Pneumatic mechanism; DS type SFL-EA; HES type SFGM-FA.Old version:145kV GIS type SDA5 (SDA514) with CB type BAK5, Hydraulic mechanism.

JAPAN AE POWER SYSTEMS CORP.

Croatia/Hrvatska Yes GIS & ADAPTORS; LIMITED TO DTA ONLY; FOR CTA PREQUALIFICATION UNDER PROGRESS

KONCAR

JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.New version 145kV GIS type 100GMKD with CB type 120-SFMT-40CJ; DS type 120GRD/GLD; MES type 120GRED/GRE; HES type 120 GRED/GRE-A.Old version: 145kV GIS 120GMKM with CB type 120-SFMT-40,Pneumatic mechanism; DS type 120-GR-20, 120-GL-20; MES type 120-GRE, 120-GREC; HES type 120-GREA.Old version: 145kV GIS 100GMKD with CB type 120-SFMT-40CEMotor spring mechanism; DS type 120GLD; HES type 120-GREA.

MITSUBISHI

Page 17 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

FRANCE-GRENOBLE Yes New version:145kV GIS type TH7m with CB type TH7m AF8ER(Motor spring); BDS type CM002, CM003 (3-position); LDS type CM002, CM003 (2-position); MES type CM002,CM003; HES type CM002, CM003.Old version: 145kV GIS type HEXABOLIC-TH7 with CB type DTH7 Hydraulic mechanism; BDS type SITH7; LDS type ITH7, SI TH7; ES type ST TH7.

SIEMENS

GERMANY Yes New version: 145kV GIS type 8DN8-II with CB type 8DN8 Motor spring mechanism; DS type 8DN8; ES type 8DN8.Old version: 145kV GIS type 8DN8 with CB type 8DN6(P1) Motor spring mechanism; DS type 8DN8; ES type 8DN8.

SIEMENS

JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.145kV GIS type with CB type GSPK-145AP; BDS type KTM-120PW, DTM-120PW, DLM-120PW; LDS type KTM-120PW, DTM-120PW; MES type EBM-120W; HES type EAP-120W.

TOSHIBA CORPORATION, T&D

12Total =

230 KV -GIS7. 1. 3 32-TMSS-02Applicable Standards:

SWITZERLAND Yes 230kV GIS type ELK SP2-1 with CB type ELK SP2-1; BDS type ELK-TE/ ELK-TW/ELK-TV; MES type ELK EM/ELK-EA; HES type ELK EB.

ABB

FRANCE-(AIX-LES BAINS) Yes 230kV GIS type T105 with CB type B105-CB; DS type CLTAREVA (AIX-LES BAINS)

JAPAN Yes 230kV GIS type MFPT MFPTB-300-63L with CB type MFPTB-300-63LA, HAR/MFTB-300-563L; BDS type FL-EA, LDS type FMG-FA/FG.

JAPAN AE POWER SYSTEMS CORP.

JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.MITSUBISHI

FRANCE-GRENOBLE YesSIEMENS

GERMANY Yes 230kV GIS type 8DN40-8DN4 with CB 8DN401-8DN4; BDS type 8DN4-8DQ1; LDS type 8DP4; MES type 8DN4; HES type 8DP4

SIEMENS

JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.TOSHIBA CORPORATION, T&D

7Total =

380 KV - GIS7. 1. 4 32-TMSS-02Applicable Standards:

SWITZERLAND Yes 420kV GIS type ELK-03 with CB type ELKSP-3 DOUBLE BREAK, Spring Hydraulic Charged mechanism, BDS type ELKT, LDS type ELKT, MES type ELK EM3, MES type ELK EB3

ABB

FRANCE-(AIX-LES BAINS) Yes 420kV GIS type T155 with CB type FB2T (Hydrolic Mech.)AREVA (AIX-LES BAINS)

Page 18 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

KOREA, Republic of-Changwon Yes Based on TS&SD letter # 10-F-02299/02-03032301 dated 25/10/2010, it is pre-qualified for 420kV GIS type HSG 426A, 63kA, CB (Single Break) type HCHY 426A with Hydraulic Mechanism, Busbar DS type HDMO 426A, Line DS type HDMO 426B,ES type HEMO 426A&H-ES type HEMS 426A as confirming to SEC specification # 32-TMSS-02,Rev.01, with the following conditions:

• Supply one complete spare bay" free of charge" (for not repeating the short circuit test of circuit breaker type HCHY 426A) on the first supply of 420kV GIS type HSG 426A to SEC. This was confirmed in writing by Hyosung Corp (Korea) through letter #Nil dated 28th December 2009.

• Repeat/carry out the temperature rise test at 55?C (it was carried out before at 50?C) of the main circuit on the first supply of the 420kV GIS type HSG 426A to SEC. This was confirmed in writing by Hyosung Corp (Korea) through letter #HS-420GIS-100830-1 dated 30th August 2010.

• Back to back switching tests for the capacitor bank shall be conducted in an independent test laboratory whenever there is project requirement. This was confirmed in writing by Hyosung Corp (Korea) through letter #HS-420GIS-100830-1 dated 30th August 2010.

• Ten (10) years extended warranty for the proposed 420kV GIS type HSG 426A from the date of PAC of the turnkey project in case of contract award or date of delivery in case of direct material supply order. This was confirmed in writing by Hyosung Corp (Korea) through letter #HS-420GIS-100830-1 dated 30th August 2010.

HYOSUNG (HICO)

KOREA, Republic of-Ulsan Yes 420 kV; 63kA; TYPE-550 SR; CB-550 SR-K (Single Break); DS-550 DRM 1&2; ES-550 ERM; HES-550 LES; back to back capacitor switching test for C.B. shall be done in independent laboratory iin the presence of SEC Engineers whenever there is a requirment for this test iin th PTS of forthcoming SEC projects.- 10 Years extended warranty.

HYUNDAI

JAPAN Yes 420kV GIS type 1FTJAPAN AE POWER SYSTEMS CORP.

JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.MITSUBISHI

FRANCE-GRENOBLE Yes 420kV GIS type YGII with CB type SPD; DS ype YGIISIEMENS

United Kingdom-HEBBUM YesSIEMENS

Page 19 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

GERMANY Yes New version: 550kV GIS typ 8DQ1 with CB type 8dQ1-P2; DS type 8DQ1; ES type 8DQ1. with ten (10) years extended warranty from the date of Provisional Acceptance Certificate (PAC) of the Turnkey project (In case of contract award) and from the date of delivery for the direct material supply order. The guarantee/warranty shall cover all the cost of materials and labor as per warranty/guarantee of materials and workmanship and subsequently reduced yearly in case of future project award.old version: 420kV GIS type 8DQ1 with CB type 8DQ1-T2, DOUBLE BREAK, Hydraulic mechanism; DS type 8QD1

SIEMENS

JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.Old virsion: 420kV GIS type GID with CB type GSR 400R2B/GSRK, DOUBLE BREAK, Hydraulic mechanism.

TOSHIBA CORPORATION, T&D

10Total =

33 KV GIS7. 1. 5 Applicable Standards:

GERMANY Yes Based on TS&SD Letter # 10-02461-02-03032301 dated 31/08/2010, it is pre-qualified for 36kV GIS type 8DA10,rated current 2500A,short time current rating of 25kA(3sec) ,CB type 3AH with interrupter type VS 30040 (40kA) as confirming to SEC specification # 32-TMSS-03, Rev.0 with the following conditions:

• Capacitor bank back to back switching tests in case of non availability of test report shall be conducted in an independent testing laboratory in the presence of three (3) SEC engineers & one (1) SEC approved independent inspection agency Inspector, all the related costs for witnessing the tests will be borne by the manufacturer, in case there is a need of capacitor bank application. This was confirmed by Siemens through letter # 8DA10_PQR_R1 dated 25/08/2010.

• Seven (7) years extended warranty for the proposed 36kV GIS ,type 8DA10 from the date of PAC of the turnkey project in case of contract award or date of delivery in case of direct material supply order. This was confirmed by Siemens trough letter # 8DA10_PQR_R1 dated 25/08/2010.

SIEMENS

1Total =

8 BATTERY EQUIPMENT

BATTERY LEAD ACID18 .

BATTERY LEAD ACID8. 1. 0 46-TMSS-01Applicable Standards:

GERMANY YesBAE BERLINER BATTERIE FABRIK- G

Page 20 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

United States YesC & D

FRANCE YesCEAC

FRANCE-- Yes PREVIOUSLY KNOWN AS HAWKER S.A.R.L - FRANCE; FIVE YEARS OF EXTENDED WARRANTY

ENERSYS S.A.R.L.

United States YesEXIDE

ITALY YesFIAMM

United States YesGOULD (GNB)

GERMANY YesHOPPECKE

SLOVENIA YesTOVARNA AKUMULATORSKIH BATERIJ

United Kingdom YesTUNGSTONE (HAWKER TUNGSTONE)

GERMANY YesVARTA

JAPAN YesYUASA

12Total =

BATTERY LEAD ACID, VALVE REGULATED LEAD ACID (VRLA)28 .

BATTERY LEAD ACID, VALVE REGULATED LEAD ACID (VRLA)8. 2. 0 46-TMSS-04Applicable Standards:

FRANCE-- Yes originally was SAFT Power System SAS-FranceAEG Power Solutions SAS

United States YesC & D

United Kingdom YesCHLORIDE (HAWKER CHLORIDE)

ITALY YesFIAMM

United States YesGNB

United Kingdom YesHAWKER LTD.

GERMANY YesHOPPECKE

GERMANY YesSAB

United States YesSEC

GERMANY YesVARTA

United States YesYUASA EXIDE

11Total =

BATTERY NICKEL CADMIUM (NiCD)38 .

BATTERY NICKEL CADMIUM (NiCD)8. 3. 0 46-TMSS-06Applicable Standards:

Page 21 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

SWEDEN YesALCAD

FRANCE YesCHLORIDE

SPAIN YesEMISA

United States YesEXIDE

GERMANY Yes MERGED WITH SAFT NIFE -SWEDENFRIWO

GERMANY-Zwickau Yes Based on TS&SD fax ref.#08-F02675/03-03032301 dated 10/01/2009. Pre-Qualified for Nicd Battery with this conditions: -First batch shall be type tested in Independent Laboratory iin presence of (3) SEC engineers & (1) independent inspector. -(07) years warranty

GAZ Gerate- und Akkumulatorenwerk Zwickau GmbH

United States YesGNB

SWEDEN Yes 370 TO 1390AHSAFT-NIFE

GERMANY YesVARTA HAWKER

9Total =

BATTERY CHARGER48 .

BATTERY CHARGER8. 4. 1 46-TMSS-02Applicable Standards:

FRANCE YesAEES

FRANCE-- Yes Originally was SAFT Power System SAS-FranceAEG Power Solutions SAS

FRANCE YesBENNING

United States YesC & D

ITALY-BIBIENA Yes Based on TS&SD letter# 09-F001363/02-03032301 dated 2nd. May 2009 as confirming to SEC specifications # 46-TMSS-02, rev.0 ; with the following conditions: • All tests shall be carried out on the first batch of Battery Charger or UPS to be supplied to SEC in securing an order in the manufacturer's testing laboratory in the presence of three (3) SEC engineers & one (1) approved independent inspection agency Inspector. • Ten (10) years warranty from the date of PAC of the turnkey project in case of contract award or date of delivery in case of direct material supply order.

CEG

FRANCE YesCHLORIDE

SPAIN YesEMISA (ELECTRO MERCANTIL INDUSTRIAL S.A. SPAIN)

United Kingdom YesERSKINE

United States YesEXIDE

Page 22 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

SWITZERLAND YesGUTOR ELECTRONIC LTD.

GERMANY YesTHEO-BENNING

11Total =

UPS, 5 THROUGH 100KVA8. 4. 2 46-TMSS-03Applicable Standards:

ITALY-BIBIENA Yes Based on TS&SD letter# 09-F001363/02-03032301 dated 2nd. May 2009 as confirming to SEC specifications # 46-TMSS-03, rev.0 ; with the following conditions: • All tests shall be carried out on the first batch of Battery Charger or UPS to be supplied to SEC in securing an order in the manufacturer's testing laboratory in the presence of three (3) SEC engineers & one (1) approved independent inspection agency Inspector. • Ten (10) years warranty from the date of PAC of the turnkey project in case of contract award or date of delivery in case of direct material supply order.

CEG

SWITZERLAND YesGUTOR ELECTRONIC LTD.

2Total =

BATTERY CHARGER, 48 VDC8. 4. 3 46-TMSS-02,46-TMSS-05Applicable Standards:

FRANCE Yes ACCEPTABLE FOR APPLICATIONS OTHER THAN TELECOMAEES

FRANCE-- Yes originally was SAFT Power System SAS-FranceAEG Power Solutions SAS

FRANCE YesBENNING

ITALY Yes FOR TELECOM APPLICATIONSBRAGA MORO

FRANCE YesCHLORIDE

AUSTRALIA-ALPHA Yes SWITCH MODE RECTIFIERS / BATTERY CHARGERS ONLY FOR TELECOM APPLICATION.

COM 10 INTERNATIONAL PTY. LTD.

SPAIN YesEMISA (ELECTRO MERCANTIL INDUSTRIAL S.A. SPAIN)

Page 23 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

United Kingdom Yes Based on TS&SD letter# 09-F02210/03-03032301 dated 1st . September 2009, ERSKIN System Ltd. (a division of Dale Power Solution plc) from United Kingdom-Scarborough for 48V DC battery Charger as confirming to SEC specification # 46-TMSS-05, rev.0 with the following conditions:• All type, design, special & routine tests as per SEC specifications/standards shall be carried out on the first batch to be supplied to SEC in securing an order in the manufacturer's laboratory in the presence of three (3) SEC engineers & one (1) approved independent inspection agency Inspector. • Ten (10) years warranty from the date of PAC of the turnkey project in case of contract award or date of delivery in case of direct material supply order.

ERSKINE

United States Yes SCR TYPE ONLYEXIDE

United Kingdom Yes .HAMMER & SIMMONS

United States Yes SWITCH MODE RECTIFIERS ONLY FOR TELECOM APPLICATIONS

T.D.I

11Total =

9 LV DISTRIBUTION PANELS

AC & DC DIST. PANELS19 .

AC & DC DIST. PANELS9. 1. 0 31-TMSS-02Applicable Standards:

Saudi Arabia YesABB/AEIL

Saudi Arabia-RIYADH YesALFANAR ELECTRICAL SYSTEMS

Saudi Arabia-DAMMAM YesEAST & WEST FACTORY

Saudi Arabia-DAMMAM YesELECTRICAL PANEL BOARD FACTORY/HAWA TRADING

Saudi Arabia-RIYADH YesEPS LTD. (GROUPE SCHNEIDER)

United Arab Emirates-DUBAI Yes Type/design, special, routine tests shall be performed for first project at an independent laboratory in the presence of 3rd party & 3 SEC Engineers. Extended warranty for 10 years.

ETA-PCS

Saudi Arabia-RIYADH YesMOHAMMAD AL –OJAIMI FACTORY

Saudi Arabia-RIYADH YesMUSAID SWITCHGEAR

Saudi Arabia-DAMMAM YesREMAL

Saudi Arabia-JEDDAH YesSIEMENS

10Total =

10 LOAD BREAK SWITCHES UPTO 34.5 KV & RING MAIN UNITS, 15 KV

Page 24 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

LOAD BREAK SWITCHES UPTO 34.5 KV110 .

LOAD BREAK SWITCHES UPTO 34.5 KV10. 1. 0 Applicable Standards:

Saudi Arabia YesABB/AEIL

FRANCE YesAREVA

Saudi Arabia-RIYADH YesEPS LTD. (GROUPE SCHNEIDER)

GERMANY YesFRITZ DRIESCHER

JAPAN YesHITACHI

Croatia/Hrvatska YesKONCAR

GERMANY YesSIEMENS

7Total =

RMU, 15 KV210 .

RMU, 15 KV10. 2. 0 32-TMSS-07Applicable Standards:

Saudi Arabia-RIYADH YesABB

FRANCE YesAREVA

Saudi Arabia-RIYADH YesEPS LTD. (GROUPE SCHNEIDER)

GERMANY YesFRITZ DRIESHER KG

Saudi Arabia-DAMMAM YesGULF REYROLLE LTD

FRANCE YesMERLIN GERIN

Saudi Arabia-AL KHOBAR YesSAUDI LUCY

GERMANY-FRANKFURT YesSIEMENS AG EVM

Saudi Arabia-DAMMAM YesTHE INTERNATIONAL ELECTRICAL PRODUCTS CO.

United Kingdom YesW. LUCY

10Total =

SPARE PARTS FOR RMU & EOS310 .

SPARE PARTS FOR RMU & EOS10. 3. 0 Applicable Standards:

BAHRAIN YesCELLMEC

Page 25 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

1Total =

11 NEUTRAL EARTHING RESISTORS UP TO 33 KV

NER, UP TO 33 KV111 .

NER, UP TO 33 KV11. 1. 0 57-TMSS-01Applicable Standards:

United Kingdom YesCRESSAL RESISTOR

United Kingdom YesFURSE

FRANCE-- Yes EXTENDED GUARANTEE / WARRANTY FOR 10 YEARSM.S.Resistances

FRANCE YesMETAL DEPLOYE

INDIA YesNATIONAL

5Total =

12 BARE CONDUCTORS

TYPE ACAR / ACSR / AAAC112 .

BARE CONDUCTOR, ACAR / ACSR / AAAC12. 1. 1 10-TMSS-01Applicable Standards:

United States YesALCOA

INDIA-NALAGARH Yes Based on TS&SD Letter # 10-01566-2-03032300 dated 14/06/2010, it is pre-qualified for Bar Conductors as confirming to SEC specification # 10-TMSS-01, Rev.01 with the following conditions:

• The first batch of each type of conductors to be supplied to SEC shall be type tested in an independent accredited test laboratory in the presence of three (3) SEC engineers & one (1) SEC approved independent inspection agency Inspector and all cost pertaining to the tests shall be borne by the manufacturer. This has been confirmed in writing by the manufacturer, through letter # AIL/BRD/PQ/SEC/19 dated 22nd May 2010.

• Ten (10) years warranty from the date of PAC of the turnkey project in case of contract award or date of delivery in case of direct material supply order. This has been confirmed in writing by the manufacturer; through letter # AIL/BRD/ SEC/PQ/19 dated 22nd May 2010.

APAR Industries Ltd-NALAGARH

Page 26 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

INDIA-SILVASSA Yes Based on TS&SD Letter # 10-01566-2-03032300 dated 14/06/2010, it is pre-qualified for Bar Conductors as confirming to SEC specification # 10-TMSS-01, Rev.01with the following conditions:

• The first batch of each type of conductors to be supplied to SEC shall be type tested in an independent accredited test laboratory in the presence of three (3) SEC engineers & one (1) SEC approved independent inspection agency Inspector and all cost pertaining to the tests shall be borne by the manufacturer. This has been confirmed in writing by the manufacturer, through letter # AIL/BRD/PQ/SEC/19 dated 22nd May 2010.

• Ten (10) years warranty from the date of PAC of the turnkey project in case of contract award or date of delivery in case of direct material supply order. This has been confirmed in writing by the manufacturer; through letter # AIL/BRD/ SEC/PQ/19 dated 22nd May 2010.

APAR Industries Ltd-SILVASSA

BAHRAIN-MANAMA YesMIDAL CABLE LTD.

MUSCAT-- Yes FIRST LOT OF EACH TYPE SHALL BE TYPE TESTED IN AN INDEPENDENT LABORATORY PER 10-TMSS-01 & OTHER INTL. STANDARDS, IN PRESENCE OF SEC ENGINEERS AND ALL COST SHALL BE BORNE BY THE MANUFACTURER.10 YEARS EXTENDED WARRANTY.

OMAN CABLE INDUSTRIES

Saudi Arabia-RIYADH YesRIYADH CABLES

Saudi Arabia-JEDDAH YesSAUDI CABLE

United States YesSOUTHWIRE

INDIA-- Yes Based on TS&SD Letter # 10-F001691/01-03032301 dated 19/06/2010, it is pre-qualified for Bare Conductors types (ACAR, ACSR & AAAC) as confirming to SEC specification # 10-TMSS-01 Rev.01 with the following conditions:

• ACAR and ACSR conductors are successfully type tested in accredited laboratory in presence of SEC Engineers with acceptable results.

• For AAAC conductors, type, special, routine and sample tests shall be conducted on the first batch in an independent accredited test laboratory in the presence of three (3) SEC engineers & one (1) SEC approved independent inspection agency Inspector and all cost pertaining to the tests shall be borne by the manufacturer.

• Ten (10) years warranty from the date of PAC of the turnkey project in case of contract award or date of delivery in case of direct material supply order.

STERLITE (INDIA)

Page 27 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

9Total =

TYPE ACSR/AW212 .

BARE CONDUCTOR, ACSR/AW12. 2. 1 10-TMSS-01Applicable Standards:

United States YesALCOA

INDIA-NALAGARH Yes Based on TS&SD Letter # 10-01566-2-03032300 dated 14/06/2010, it is pre-qualified for Bar Conductors as confirming to SEC specification # 10-TMSS-01, Rev.01 with the following conditions:

• The first batch of each type of conductors to be supplied to SEC shall be type tested in an independent accredited test laboratory in the presence of three (3) SEC engineers & one (1) SEC approved independent inspection agency Inspector and all cost pertaining to the tests shall be borne by the manufacturer. This has been confirmed in writing by the manufacturer, through letter # AIL/BRD/PQ/SEC/19 dated 22nd May 2010.

• Ten (10) years warranty from the date of PAC of the turnkey project in case of contract award or date of delivery in case of direct material supply order. This has been confirmed in writing by the manufacturer; through letter # AIL/BRD/ SEC/PQ/19 dated 22nd May 2010.

APAR Industries Ltd-NALAGARH

INDIA-SILVASSA Yes Based on TS&SD Letter # 10-01566-2-03032300 dated 14/06/2010, it is pre-qualified for Bar Conductors as confirming to SEC specification # 10-TMSS-01, Rev.01 with the following conditions:

• The first batch of each type of conductors to be supplied to SEC shall be type tested in an independent accredited test laboratory in the presence of three (3) SEC engineers & one (1) SEC approved independent inspection agency Inspector and all cost pertaining to the tests shall be borne by the manufacturer. This has been confirmed in writing by the manufacturer, through letter # AIL/BRD/PQ/SEC/19 dated 22nd May 2010.

• Ten (10) years warranty from the date of PAC of the turnkey project in case of contract award or date of delivery in case of direct material supply order. This has been confirmed in writing by the manufacturer; through letter # AIL/BRD/ SEC/PQ/19 dated 22nd May 2010.

APAR Industries Ltd-SILVASSA

Saudi Arabia-JEDDAH YesJEDDAH CABLE CO.

BAHRAIN-MANAMA YesMIDAL CABLE LTD.

Page 28 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

MUSCAT-- Yes FIRST LOT OF EACH TYPE SHALL BE TYPE TESTED IN AN INDEPENDENT LABORATORY PER 10-TMSS-01 & OTHER INTL. STANDARDS, IN PRESENCE OF SEC ENGINEERS AND ALL COST SHALL BE BORNE BY THE MANUFACTURER.10 YEARS EXTENDED WARRANTY.

OMAN CABLE INDUSTRIES

Saudi Arabia-RIYADH YesRIYADH CABLES

Saudi Arabia-JEDDAH YesSAUDI CABLE

United States YesSOUTHWIRE

INDIA-- Yes Based on TS&SD Letter # 10-F001691/01-03032301 dated 19/06/2010, it is pre-qualified for Bare Conductors type (ACSR/AW) as confirming to SEC specification # 10-TMSS-01 Rev.01 with the following condition:

• Ten (10) years warranty from the date of PAC of the turnkey project in case of contract award or date of delivery in case of direct material supply order.

STERLITE (INDIA)

10Total =

GROUND WIRE312 .

GROUND WIRE12. 3. 1 10-TMSS-03Applicable Standards:

United States YesALCOA

INDIA-NALAGARH Yes Based on TS&SD Letter # 10-01566-2-03032300 dated 14/06/2010, it is pre-qualified for Overhead Ground Wire (OGW) of Aluminum Clad Steel (ACS) Type only as confirming to SEC specification # 10-TMSS-03, Rev.0 with the following conditions:

• The first batch of Aluminum Clad Steel (ACS) type to be supplied to SEC shall be type tested in an independent accredited test laboratory in the presence of three (3) SEC engineers & one (1) SEC approved independent inspection agency Inspector and all cost pertaining to the tests shall be borne by the manufacturer. This has been confirmed in writing by the manufacturer through letter # AIL/BRD/PQ/SEC/19 dated 22nd May 2010.

• Ten (10) years warranty from the date of PAC of the turnkey project in case of contract award or date of delivery in case of direct material supply order. This has been confirmed in writing by the manufacturer through letter # AIL/BRD/ SEC/PQ/19 dated 22nd May 2010.

APAR Industries Ltd-NALAGARH

Page 29 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

INDIA-SILVASSA Yes Based on TS&SD Letter # 10-01566-2-03032300 dated 14/06/2010, it is pre-qualified for Overhead Ground Wire (OGW) of Aluminum Clad Steel (ACS) Type only as confirming to SEC specification # 10-TMSS-03, Rev.0 with the following conditions:

• The first batch of Aluminum Clad Steel (ACS) type to be supplied to SEC shall be type tested in an independent accredited test laboratory in the presence of three (3) SEC engineers & one (1) SEC approved independent inspection agency Inspector and all cost pertaining to the tests shall be borne by the manufacturer. This has been confirmed in writing by the manufacturer through letter # AIL/BRD/PQ/SEC/19 dated 22nd May 2010.

• Ten (10) years warranty from the date of PAC of the turnkey project in case of contract award or date of delivery in case of direct material supply order. This has been confirmed in writing by the manufacturer through letter # AIL/BRD/ SEC/PQ/19 dated 22nd May 2010.

APAR Industries Ltd-SILVASSA

SPAIN YesECN CG SA

JAPAN YesJ-POWER SYSTEM CORP.

BAHRAIN-MANAMA YesMIDAL CABLE LTD.

Saudi Arabia-RIYADH YesRIYADH CABLES

Saudi Arabia-JEDDAH YesSAUDI CABLE

United States YesSOUTHWIRE

FRANCE YesTREFILEUROPE

10Total =

COPPER CLAD, STEEL GROUNDING CONDUCTOR & GROUNDING ROD412 .

COPPER CLAD STEEL GROUNDING CONDUCTOR AND GROUNDING ROD12. 4. 1 10-TMSS-05Applicable Standards:

United States-Statesville, NC YesComScope Bimetals USA

United Kingdom-Nottingham Yes Including Exothermic Welding and Grounding connectors.FM Sudafix

Saudi Arabia YesFURSE

CHINA YesGANSEC SHENGYUEAN WIRE & CABLE CO. LTD.

SOUTH KOREA YesILJIN CORP./JIWOONG ELECTRIC CO.

United States YesLTV COPPERWELD

Saudi Arabia-JEDDAH YesSAUDI ELECTRIC INDUSTRIES CO. LTD.

Page 30 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

7Total =

COMPOSITE OPTICAL OH GROUND WIRE (OPGW)512 .

OPGW12. 5. 1 10-TMSS-04Applicable Standards:

United Kingdom-- Yes PREVIOUSLY ALCOA FUJIKURA LTD (AFL).AFL TELECOMMUNICATIONS EUROPE LTD

GERMANY-Monchengladbach Yes EXTENDED GUARANTEE/WARRANTY FOR A PERIOD OF 10 YEARS.

Previously Draka Comteq Germany GmbH & KG.

AFL Telecommunications GmbH

SWITZERLAND YesBRUGG TELECOM AG

United Kingdom-PRESCOT YesCORNING CABLES (BICC)

FINLAND YesDRAKA NK

JAPAN YesFUJIKURA

JAPAN YesFURUKAWA ELECTRIC CO. LTD.

CHINA-Nantong Yes Based on TS&SD Letter # 10-01654-03032301 dated 05/06/2010, it is pre-qualified for OPGW as confirming to SEC specification # 10-TMSS-04, Rev.0 with the following conditions:

• The first batch of each types of OPGW to be supplied to SEC shall be type tests in an independent testing laboratory in the presence of three (3) SEC engineers & one (1) SEC approved independent inspection agency Inspector and all cost pertaining to the tests shall be borne by manufacturer .All type/design, routine/sample and special tests per SEC material specification number 10-TMSS-04, Rev.0 shall be conducted. This was confirmed in writing by the manufacturer through letter# Nil dated 18th June 2009.

• Ten (10) years warranty from the date of PAC of the turnkey project in case of contract award or date of delivery in case of direct material supply order. This was confirmed in writing by the manufacturer through letter # Nil dated 18th June 2009.

Jiangsu Zhongtian Technology Co.Ltd (ZTT)-China

Page 31 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

KOREA, Republic of Yes Based on TS&SD letter # 10-02583-03032301 dated 19/09/2010, it is pre-qualified for OPGW as confirming to SEC specification # 10-TMSS-04,Rev.0, with the following conditions:

• All type/design; routine/sample and special tests per SEC material specification # 10-TMSS-04, Rev.0 of first batch of each types of OPGW to be supplied to SEC shall be conducted in an independent testing laboratory in the presence of three (3) SEC engineers & one (1) SEC approved independent inspection agency Inspector and all cost pertaining to the tests shall be borne by Manufacturer. This was confirmed in writing by the manufacturer through letter #Nil dated 24th December 2009.

• Ten (10) years extended warranty for each types of OPGW from the date of PAC of the turnkey project in case of contract award or date of delivery in case of direct material supply order. This was confirmed in writing by the manufacturer through letter #Nil dated 24th December 2009.

LS CABLES

CANADA YesPHILLIPS FITEL

ITALY YesPIRELLI

SPAIN Yes PREVIOUSLY "PIRELLI"PRYSMIAN TELECOM

KOREA, Republic of Yes Based on TS&SD letter# 09-F00730/03-03032301 dated 24th August 2009, Taihan Electric Wire Co. Ltd. from South Korea-Anyang for OPGW as confirming to SEC specification # 10-TMSS-04, rev.0 with the following conditions:• All type, design, special & routine tests as per SEC specifications/standards shall be carried out on the first batch to be supplied to SEC in securing an order in the manufacturer's laboratory in the presence of three (3) SEC engineers & one (1) approved independent inspection agency Inspector. • Ten (10) years warranty from the date of PAC of the turnkey project in case of contract award or date of delivery in case of direct material supply order.

TAIHAN ELECTRIC WIRE COMPANY

13Total =

HEAT RESISTANT ALUMINUM ALLOY CONDUCTOR612 .

HEAT RESISTANT ALUMINUM ALLOY CONDUCTOR12. 6. 1 10-TMSS-06Applicable Standards:

JAPAN Yes IT IS A CONSORTIUM OF FUJIKURA & FURUKAWA. ONLY INVAR CONDUCTORS PER CLAUSE 1.3 & 1.4 OF 10-TMSS-06. FIRST LOT TO BE TYPE TESTED IN THE PRESENCE OF 3 SEC ENGRS AND IIA INSPECTOR; EXTENDED WARRANTY FOR 10 YEARS.

FUJIKURA VISCAS CORP

JAPAN Yes Based on TS&SD letter# 09-00649-1-03032301 dated 28 March 2009 it is pre-qualified for GTACSR & GZTACSR.

J-POWER SYSTEM CORP.

Page 32 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

KOREA, Republic of Yes Based on TS&SD letter # 10-02584-03032301 dated 19/09/2010, it is pre-qualified for Heat Resistance Aluminum Alloy Conductors, Gap& Non Gap type as confirming to SEC specification # 10-TMSS-06,Rev.0, with the following conditions:

• All type/design; routine/sample and special tests per SEC material specification # 10-TMSS-06, Rev.0 of first batch of each types of Heat Resistance Aluminum Alloy Conductors to be supplied to SEC shall be conducted in an independent testing laboratory in the presence of three (3) SEC engineers & one (1) SEC approved independent inspection agency Inspector and all cost pertaining to the tests shall be borne by Manufacturer. This was confirmed in writing by the manufacturer through letter #Nil dated 08th January 2010.

• Ten (10) years extended warranty for each types of Heat Resistance Aluminum Alloy Conductors from the date of PAC of the turnkey project in case of contract award or date of delivery in case of direct material supply order. This was confirmed in writing by the manufacturer through letter #Nil dated 08th January 2010.

• Full time presence of LS-Korea expert during execution of first order with Gap type conductor for guidance and training of SEC/Contractor staff about installation of this type of conductor as confirmed through LS letter # LS/LHJ-100526/00 dated 26th May 2010.

• Full technical support will be provided to SEC during operation of Gap Conductors for minimum five (5) years period from first project as confirmed through LS letter # LS/LHJ-100526/00 dated 26th May 2010.

LS CABLES

3Total =

13 INSULATED CONDUCTOR CABLE (XLPE)

13.8 KV113 .

XLPE CABLE –13.8 KV13. 1. 1 Applicable Standards:

United Arab Emirates-DUBAI Yes Including Joints & TerminationsDUBAI CABLE CO.

EGYPT-- Yes Including Joints & TerminationsELSEWEDY EGYTECH CABLE CO.

Saudi Arabia-JEDDAH Yes Including Joints & TerminationsJEDDAH CABLE CO.

KOREA, Republic of Yes PREVIOUSLY LG; Including Joints & TerminationsLS

Page 33 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

MUSCAT-- Yes Ref# is 08-02531/01-0303230 dated 08/11/2008no accessories are pre-qualified

OMAN CABLE INDUSTRIES

Saudi Arabia-RIYADH Yes Including Joints & TerminationsRIYADH CABLES

Saudi Arabia-JEDDAH Yes Including Joints & TerminationsSAUDI CABLE

KOREA, Republic of Yes Including Joints & TerminationsTAIHAN ELECTRIC WIRE COMPANY

8Total =

33 & 34.5 KV213 .

XLPE CABLE –33 & 34.5 KV13. 2. 1 Applicable Standards:

JAPAN Yes Including Joints & TerminationsDAINICHI-NIPPON CABLES (MITSUBISHI)

TURKEY-- Yes Including Joints & TerminationsDEMIRER KABLO/SAUDI CABLE CO.

United Arab Emirates-DUBAI Yes Including Joints & TerminationsDUBAI CABLE CO.

EGYPT-- Yes Including Joints & TerminationsELSEWEDY EGYTECH CABLE CO.

JAPAN Yes Including Joints & TerminationsFUJIKURA CABLES

Saudi Arabia-JEDDAH Yes Including Joints & TerminationsJEDDAH CABLE CO.

JAPAN Yes Including Joints & TerminationsJ-POWER SYSTEM CORP.

KOREA, Republic of Yes PREVIOUSLY LG; Including Joints & TerminationsLS

HUNGARY Yes Including Joints & TerminationsMKM

MUSCAT-- Yes Ref# is 08-02531/01-0303230 dated 08/11/2008no accessories are pre-qualified

OMAN CABLE INDUSTRIES

Saudi Arabia-RIYADH Yes Including Joints & TerminationsRIYADH CABLES

Saudi Arabia-JEDDAH Yes Including Joints & TerminationsSAUDI CABLE

JAPAN Yes Including Joints & TerminationsSHOWA CABLE

KOREA, Republic of Yes Including Joints & TerminationsTAIHAN ELECTRIC WIRE COMPANY

14Total =

XLPE CABLES – 69 KV313 .

XLPE CABLES – 69 KV13. 3. 1 11-TMSS-01Applicable Standards:

FRANCE Yes Including Joints & TerminationsALCATEL

JAPAN Yes Including Joints & TerminationsDAINICHI-NIPPON CABLES (MITSUBISHI)

TURKEY-- Yes Including Joints & TerminationsDEMIRER KABLO/SAUDI CABLE CO.

Page 34 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

FINLAND Yes Including Joints & TerminationsDRAKA NK

EGYPT-- Yes TO CARRY OUT ALL TYPE/DESIGN AND ROUTINE/SAMPLE TESTS AT SEC APPROVED INDEPENDENT LABORATORY IN PRESENCE OF A REPRESENTATIVE OF 3RD PARTY INSPECTION AGENCY & THREE ENGINEERS OF SEC FOR FIRST CONTRACT; 10 YEARS OF EXTENDED GUARANTEE/WARRANTY; FOR JOINTS & TERMINATIONS ALSO;

ELSEWEDY EGYTECH CABLE CO.

JAPAN Yes Including Joints & TerminationsFUJIKURA CABLES

JAPAN Yes Including Joints & TerminationsFURUKAWA ELECTRIC CO. LTD.

Saudi Arabia-JEDDAH Yes Based on TS&SD letter # 10-02784-01-03032301 dated 24/10/2010, it is pre-qualified for 69kV, 1x630mm² XLPE Power Cable as confirming to SEC specification # 11-TMSS-01, Rev.0, with the following condition:

• Ten (10) years extended warranty for the proposed 69kV, 1x630mm² XLPE Power Cable from the date of PAC of the turnkey project in case of contract award or date of delivery in case of direct material supply order. This was confirmed in writing by Jeddah Cable Co. through letter #Nil dated 26th June 2006.

JEDDAH CABLE CO.

JAPAN Yes Including Joints & TerminationsJ-POWER SYSTEM CORP.

HUNGARY Yes Including Joints & TerminationsMKM

NORWAY Yes Including Joints & TerminationsNEXANS NORWAY AS

GERMANY-BERLIN Yes Including Joints & TerminationsPIRELLI KABEL AND SYSTEM GMBH

Saudi Arabia-RIYADH Yes Including Joints & TerminationsRIYADH CABLES

Saudi Arabia-JEDDAH Yes Including Joints & TerminationsSAUDI CABLE

GERMANY-GERMANY Yes PREVIOUSLY ABB. Including Joints & TerminationsSUDKABEL

15Total =

110KV TO 132 KV413 .

XLPE CABLES – 110 TO 132 KV13. 4. 1 11-TMSS-02Applicable Standards:

SWITZERLAND Yes Including Joints & TerminationsBRUGG

JAPAN Yes Including Joints & TerminationsDAINICHI-NIPPON CABLES (MITSUBISHI)

TURKEY-- Yes Including Joints & TerminationsDEMIRER KABLO/SAUDI CABLE CO.

FINLAND Yes Including Joints & TerminationsDRAKA NK

Page 35 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

EGYPT-- Yes TO CARRY OUT ALL TYPE/DESIGN AND ROUTINE/SAMPLE TESTS AT SEC APPROVED INDEPENDENT LABORATORY IN PRESENCE OF A REPRESENTATIVE OF 3RD PARTY INSPECTION AGENCY & THREE ENGINEERS OF SEC FOR FIRST CONTRACT; 10 YEARS OF EXTENDED GUARANTEE/WARRANTY; FOR JOINTS & TERMINATIONS ALSO;

ELSEWEDY EGYTECH CABLE CO.

JAPAN Yes Including Joints & TerminationsFUJIKURA

JAPAN Yes Including Joints & TerminationsFURUKAWA ELECTRIC CO. LTD.

Saudi Arabia-JEDDAH Yes Based on TS&SD letter # 10-02784-01-03032301 dated 24/10/2010, it is pre-qualified for 132kV, 1x1200mm² XLPE Power Cable as confirming to SEC specification # 11-TMSS-02, Rev.0, with the following condition:

• Ten (10) years extended warranty for the proposed 132kV, 1x1200mm² XLPE Power Cable from the date of PAC of the turnkey project in case of contract award or date of delivery in case of direct material supply order. This was confirmed in writing by Jeddah Cable Co. through letter #Nil dated 26th June 2006.

JEDDAH CABLE CO.

JAPAN Yes Including Joints & TerminationsJ-POWER SYSTEM CORP.

KOREA, Republic of Yes PREVIOUSLY LG; Including Joints & TerminationsLS

NORWAY Yes Including Joints & TerminationsNEXANS NORWAY AS

GERMANY-BERLIN Yes Including Joints & TerminationsPIRELLI KABEL AND SYSTEM GMBH

Saudi Arabia-RIYADH Yes Including Joints & TerminationsRIYADH CABLES

Saudi Arabia-JEDDAH Yes Including Joints & TerminationsSAUDI CABLE

GERMANY-GERMANY Yes PREVIOUSLY ABB. Including Joints & TerminationsSUDKABEL

KOREA, Republic of Yes Including Joints & TerminationsTAIHAN ELECTRIC WIRE COMPANY

16Total =

230 K V513 .

XLPE CABLE – 230 K V13. 5. 1 11-TMSS-02Applicable Standards:

SWITZERLAND Yes Including Joints & Terminations; COMPLETE TYPE, SPECIAL & ROUTINE TESTS FOR THE FIRST ORDER , ALSO 10 YEARS WARRANTY FROM THE DATE OF PAC ARE REQUIRED

BRUGG

JAPAN Yes Including Joints & TerminationsDAINICHI-NIPPON CABLES (MITSUBISHI)

TURKEY-- Yes Including Joints & TerminationsDEMIRER KABLO/SAUDI CABLE CO.

JAPAN Yes Including Joints & TerminationsFUJIKURA

JAPAN Yes Including Joints & TerminationsFURUKAWA ELECTRIC CO. LTD.

Page 36 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

JAPAN Yes Including Joints & TerminationsJ-POWER SYSTEM CORP.

KOREA, Republic of Yes PREVIOUSLY LG; Including Joints & TerminationsLS

NORWAY Yes Including Joints & TerminationsNEXANS NORWAY AS

GERMANY-BERLIN Yes Including Joints & TerminationsPIRELLI KABEL AND SYSTEM GMBH

Saudi Arabia-JEDDAH Yes based on TS&SD letter# 09-01366-03032301 dated 10th. May 2009, it is pre-qualified as conforming to SEC specifications # 11-TMSS-02, rev.0 with the following conditions:• All type/design and routine/sample tests shall be carried out on the first batch of 230kV XLPE power cable to be supplied to SEC in securing an order in an independent testing laboratory as per IEC/AEIC and SEC standards in the presence of three (3) SEC engineers & one (1) approved independent inspection agency Inspector. • Ten (10) years warranty from the date of PAC of the turnkey project in case of contract award or date of delivery in case of direct material supply order.

SAUDI CABLE

GERMANY-GERMANY Yes PREVIOUSLY ABB. Including Joints & TerminationsSUDKABEL

KOREA, Republic of Yes Including Joints & TerminationsTAIHAN ELECTRIC WIRE COMPANY

12Total =

380 KV613 .

XLPE CABLE -380 KV13. 6. 1 11-TMSS-02Applicable Standards:

SWITZERLAND Yes Including Joints & Terminations; COMPLETE TYPE, SPECIAL & ROUTINE TESTS FOR THE FIRST ORDER , ALSO 10 YEARS WARRANTY FROM THE DATE OF PAC ARE REQUIRED

BRUGG

JAPAN Yes Including Joints & TerminationsDAINICHI-NIPPON CABLES (MITSUBISHI)

TURKEY-- Yes Based on TS&SD letter# 09-02681-2-03032301 dated 19th October 2009, it is pre-qualified for XLPE Cable 380kV as confirming to SEC specification # 11-TMSS-02, rev.0 with the following conditions:• Ten (10) years warranty from the date of PAC of the turnkey project in case of contract award or date of delivery in case of direct material supply order. • Repeat any test type test in addition to routine tests including partial discharge test shall be conducted on the first project.

DEMIRER KABLO/SAUDI CABLE CO.

JAPAN Yes Including Joints & TerminationsJ-POWER SYSTEM CORP.

KOREA, Republic of Yes PREVIOUSLY LG; Including Joints & TerminationsLS

NORWAY Yes Including Joints & TerminationsNEXANS

Page 37 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

FRANCE Yes Including Joints & TerminationsNEXANS

GERMANY Yes Including Joints & TerminationsNKT

GERMANY-BERLIN Yes Including Joints & TerminationsPIRELLI

GERMANY-GERMANY Yes PREVIOUSLY ABB. Including Joints & TerminationsSUDKABEL

KOREA, Republic of Yes Including Joints & Terminations; Ten Years Warranty from the date of PAC

TAIHAN ELECTRIC WIRE COMPANY

JAPAN Yes Including Joints & TerminationsVISCAS FUJIKURA

12Total =

14 LOW-PRESSURE OIL FILLED (LPOF) CABLE

110 TO 132 KV114 .

LPOF CABLE –110 KV TO 132 KV14. 1. 1 11-TMSS-03Applicable Standards:

FRANCE Yes Including Joints & TerminationsALCATEL CABLE

CANADA Yes Including Joints & TerminationsCANADA WIRE

JAPAN Yes Including Joints & TerminationsDAINICHI-NIPPON CABLES (MITSUBISHI)

United Kingdom Yes Including Joints & TerminationsDATWYLER

JAPAN Yes Including Joints & TerminationsFUJIKURA

JAPAN Yes Including Joints & TerminationsFURUKAWA ELECTRIC CO. LTD.

JAPAN Yes Including Joints & TerminationsJ-POWER SYSTEM CORP.

GERMANY Yes Including Joints & TerminationsKABEL RHEYDT (AEG)

SWITZERLAND Yes Including Joints & TerminationsKABEL WERK BRUGG AG

KOREA, Republic of Yes PREVIOUSLY LG; Including Joints & TerminationsLS CABLES

SWITZERLAND Yes Including Joints & TerminationsNEXAN(CORTALLIOD)

NORWAY Yes Including Joints & TerminationsNEXANS NORWAY AS

ITALY Yes Including Joints & TerminationsPIRELLI

GERMANY-BERLIN Yes Including Joints & TerminationsPIRELLI KABEL AND SYSTEM GMBH

JAPAN Yes Including Joints & TerminationsSHOWA CABLE

GERMANY-GERMANY Yes PREVIOUSLY ABB. Including Joints & TerminationsSUDKABEL

KOREA, Republic of Yes Including Joints & TerminationsTAIHAN ELECTRIC WIRE COMPANY

17Total =

Page 38 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

230 KV214 .

LPOF CABLE –230 KV14. 2. 1 11-TMSS-03Applicable Standards:

FRANCE Yes Including Joints & TerminationsALCATEL

CANADA Yes Including Joints & TerminationsCANADA WIRE

JAPAN Yes Including Joints & TerminationsDAINICHI-NIPPON CABLES (MITSUBISHI)

JAPAN Yes Including Joints & TerminationsFUJIKURA

JAPAN Yes Including Joints & TerminationsFURUKAWA ELECTRIC CO. LTD.

JAPAN Yes Including Joints & TerminationsJ-POWER SYSTEM CORP.

GERMANY Yes Including Joints & TerminationsKABEL RHEYDT (AEG)

NORWAY Yes Including Joints & TerminationsNEXANS NORWAY AS

GERMANY-BERLIN Yes Including Joints & TerminationsPIRELLI KABEL AND SYSTEM GMBH

GERMANY-GERMANY Yes PREVIOUSLY ABB. Including Joints & TerminationsSUDKABEL

KOREA, Republic of Yes Including Joints & TerminationsTAIHAN ELECTRIC WIRE COMPANY

11Total =

380 KV314 .

LPOF CABLE –380 KV14. 3. 1 11-TMSS-03Applicable Standards:

FRANCE Yes Including Joints & TerminationsALCATEL

CANADA Yes Including Joints & TerminationsCANADA WIRE

JAPAN Yes Including Joints & TerminationsDAINICHI-NIPPON CABLES (MITSUBISHI)

JAPAN Yes Including Joints & TerminationsFUJIKURA

JAPAN Yes Including Joints & TerminationsFURUKAWA ELECTRIC CO. LTD.

JAPAN Yes Including Joints & TerminationsHITACHI CABLE LTD.

JAPAN Yes Including Joints & TerminationsJ-POWER SYSTEM CORP.

GERMANY Yes Including Joints & TerminationsKABEL RHEYDT (AEG)

KOREA, Republic of Yes PREVIOUSLY LG; Including Joints & TerminationsLS CABLES

JAPAN Yes Including Joints & TerminationsMITSUBISHI CABLE INDUSTRIES LTD

ITALY Yes Including Joints & TerminationsPIRELLI

United Kingdom Yes Including Joints & TerminationsPIRELLI GENERAL

Page 39 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

GERMANY-BERLIN Yes Including Joints & TerminationsPIRELLI KABEL AND SYSTEM GMBH

JAPAN Yes Including Joints & TerminationsSHOWA CABLE

GERMANY Yes Including Joints & TerminationsSIEMENS

NORWAY Yes Including Joints & TerminationsSTANDARD TELEFON OG KABELFABRIK A/S

KOREA, Republic of Yes Including Joints & Terminations; Complete Type, Routine / Sample tests for first order & Ten Years Warranty from the date of PAC

TAIHAN ELECTRIC WIRE COMPANY

17Total =

LINK BOX FOR U/G POWER414 .

LINK BOX FOR U/G POWER14. 4. 1 12-TMSS-11Applicable Standards:

--- Yes LINK BOX SUPPLIED / MANUFACTURED BY APPROVED POWER CABLE MANUFACTURERS ARE ACCEPTABLE

*

Saudi Arabia-Al-Khobar Yes UP TO 230KV.AARTCO

SWEDEN YesABB

Saudi Arabia-RIYADH YesAL SHAHRANI EST.

TURKEY-- YesDEMIRER KABLO/SAUDI CABLE CO.

JAPAN YesFUJIKURA VISCAS CORP

AUSTRALIA-NSW YesHAYCOLEC SWITCHGEAR PTY

JAPAN YesJ-POWER SYSTEM CORP.

KOREA, Republic of Yes PREVIOUSLY LGLS CABLES

Saudi Arabia-RIYADH Yes PAD MOUNTED STAINLESS STEEL BOXES AND UNDER GROUND FIBER GLASS BOXES UP TO 132KV ACCEPTABLE. EXTENDED GUARANTEE FOR 10 YEARS FOR THE FIRST SUPPLY AND IT WILL BE REDUCED YEARLY IN CASE OF FUTURE PROJECT AWARDS.

MOHAMMAD AL –OJAIMI FACTORY

FRANCE YesNEXANS

GERMANY-BERLIN YesPIRELLI

Saudi Arabia-Jeddah Yes Based on TS&SD fax ref# 09-00396-1-03032301 dated 17/02/2009 P.T.E is prequalified for Link Boxes rated up to 380kV.* (10) years extended warranty.

Power and Telecommunication Equipments Factory (P.T.E. Co.) (CEPCO)

GERMANY YesSTEINER

14Total =

Page 40 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

SHEATH VOLTAGE LIMITERS (SVL)514 .

SHEATH VOLTAGE LIMITERS (SVL)14. 5. 0 Applicable Standards:

SWEDEN YesABB

AUSTRALIA-NSW YesHAYCOLEC SWITCHGEAR PTY

2Total =

EARTHING BONDING CABLE614 .

EARTHING BONDING CABLE14. 6. 0 Applicable Standards:

JAPAN YesFUJIKURA VISCAS CORP

JAPAN YesJ-POWER SYSTEM CORP.

KOREA, Republic of Yes PREVIOUSLY LGLS CABLES

GERMANY-BERLIN YesPIRELLI

Saudi Arabia-JEDDAH YesSAUDI CABLE

Saudi Arabia- RIYADH YesSAUDI MODERN CO. (RIYADH CABLES)

6Total =

15 FIBER OPTIC CABLE

NON-METALLIC FIBER OPTIC (F/O) CABLE & ACCESSORIES115 .

NON-METALLIC FIBER OPTIC (F/O) CABLE & ACCESSORIES15. 1. 0 48-TMSS-02Applicable Standards:

United States YesADC

United Kingdom-- Yes PREVIOUSLY ALCOA FUJIKURA LTD. (AFL)AFL TELECOMMUNICATIONS EUROPE LTD

SWEDEN YesALCATEL

NETHERLANDS- NAAKSBERGEN YesB.V.TWENTSCHE KABELFABRIEK

United Kingdom YesBICC

SWITZERLAND YesBRUGG TELECOM AG

United Kingdom-PRESCOT YesCORNING CABLES

FINLAND YesDRAKA NK

SWEDEN Yes ACCESSORIES ONLYERICSON

Page 41 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

JAPAN YesFUJIKURA LTD.

JAPAN YesFURUKAWA

JAPAN YesHITACHI

SPAIN Yes ONLY ACCESSORIESINDUSTRIAS ARRUTI

KOREA, Republic of Yes PREVIOUSLY LGLS

Saudi Arabia-RIYADH YesMIDDLE EAST OPTIC FIBER & CABLE MANUFACTURING CO. (MEFC)

Saudi Arabia-Riyadh YesMIDDLE EAST SPECIALIZED CABLE (MESC)

NETHERLANDS YesNKF KABEL B.V.

FINLAND Yes ACCESSORIES ONLYNOKIA

Oman-Rusayl Yes Based on TS&SD letter# 10-00909-2-03032300 dated April 06, 2010. It is pre-qualified for Non Metallic Fiber Optic Cable per SEC Specification 48-TMSS-02, Rev.0 with the following conditions:

• Type Test: The first batch of each type of Non Metallic Fiber Optic Cable to be supplied to SEC shall be type tested per relevant International and SEC Specifications in presence of three (3) SEC Engineers and one (1) SEC approved IIA Inspector and all cost pertaining to the test shall be borne by the Manufacturer as confirmed through Letter# Nil dated September 12, 2009.

• Extended Warranty: Ten (10) year Extended Warranty shall be applicable for all supplies made by Oman Fiber Optic Cable Company to SEC as confirmed through Letter# EU.SEC.PQ.01 dated June17, 2009.

Oman Fiber Optic Cable Company

CZECH REPUBLIC-Jihlava Yes ONLY FOR THE FOLLOWING ACCESSORIES1 Standard 19” rack (ROV Series) and 23" rack2 Standard 19" rack Mount Fiber Optic Patch Panel type MCNP & MFDC consisting of 12/24/36/48 Ports3 Fiber Optic Wall Mount Box type MPIC consisting of 12/24/36/48 Ports4 Fiber Storage Shelf type MFSS5 Optical Pig Tails/Patch Chords equipped with FC/PC & E2000 Connectors

OPTOKON

ITALY YesPIRELLI

SPAIN Yes PREVIOUSLY "PIRELLI"PRYSMIAN TELECOM

Saudi Arabia-RIYADH YesRIYADH CABLES

Saudi Arabia-RIYADH YesRIYADH TELEPHONE CABLES CO.

Saudi Arabia-JEDDAH YesSAUDI CABLE

Page 42 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

GERMANY YesSIEMENS

JAPAN-YOKOHAMA YesSUMITOMO

Poland-Wroclaw Yes based on TS&SD letter# 09-01095-03032301 dated 18th. April 2009 for the following accessories:- Management Rack E-9000 series- Distribution & Termination Unit LCX.- Wall mounted unit LanLinxs.

TELECT

28Total =

16 PILOT WIRE CABLES & ACCESSORIES

016 .

PILOT WIRE CABLES & ACCESSORIES16. 0. 0 48-TMSS-01,48-TMSS-03,48-TMSS-04,48-TMSS-05Applicable Standards:

TURKEY Yes CABLE & ACCESSORIESDEMIRER KABLO

KOREA, Republic of Yes UP TO 100 PAIRSGOLDSTAR CABLE

Saudi Arabia-JEDDAH YesJEDDAH CABLE CO.

GERMANY Yes CABLE & ACCESSORIESKERPENWORK

KOREA, Republic of Yes PREVIOUSLY LGLS CABLES

Saudi Arabia-Riyadh YesMIDDLE EAST SPECIALIZED CABLE (MESC)

Saudi Arabia-RIYADH YesRIYADH CABLES

Saudi Arabia-JEDDAH YesSAUDI CABLE

GERMANY Yes CABLE & ACCESSORIESSIEMENS

GERMANY YesSTEINER

KOREA, Republic of YesTAIHAN ELECTRIC WIRE COMPANY

11Total =

17 SHIELDED CABLE FOR INSTRUMENTATION

017 .

SHIELDED CABLE FOR INSTRUMENTATION17. 0. 0 Applicable Standards:

United States YesALPHA

United States-NEW YORK YesAT & T

United States YesBELDEN

Page 43 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

Saudi Arabia-Riyadh YesMIDDLE EAST SPECIALIZED CABLE (MESC)

Saudi Arabia-JEDDAH Yes Based on TS&SD fax ref.#08-02969-3-03032301 dated 07/01/2009. Pre-Qualified for Shielded Instrumentation & Thermocouple Cables with this conditions: -First batch shall be type, designe, special, acceptance & routine tests in the factory test laboratory in presence of (3) SEC engineers & (1) independent inspector. -(10) years warranty

SAUDI CABLE

United Arab Emirates-Sharjah Yes APPROVED FOR CABLES WITHOUT METALLIC SHEATH; TYPE TEST CERTIFICATE FROM INDEPENDENT LAB TO BE SUBMITTED FOR 1ST ORDER; EXTENDED QUARANTEE FOR 10 YEARS.

TEKAB Co. Ltd.

6Total =

18 POWER /OR CONTROL CABLE (0.6/1KV)

018 .

POWER /OR CONTROL CABLE (0.6/1KV)18. 0. 0 11-TMSS-10Applicable Standards:

Saudi Arabia-RIYADH Yes Based on TS&SD letter# 09-01432-03032301 dated 16th. May 2009 is pre-qualified for Low Voltage Power & Control Cables 0.6/1kV as conforming to SEC specifications # 11-TMSS-10, rev.0 with the following conditions:• Ten (10) years warranty from the date of PAC of the turnkey project in case of contract award or date of delivery in case of direct material supply order.

ALFANAR ELECTRICAL SYSTEMS

United States YesBELDEN

EGYPT-- Yes based on TS&SD fax ref# 09-00303/01-03032301 dated 18/02/2009.

ELSEWEDY EGYTECH CABLE CO.

Saudi Arabia-JEDDAH YesJEDDAH CABLE CO.

JORDAN-AMMAN YesJORDAN NEW CABLE COMPANY

Saudi Arabia-Riyadh YesMIDDLE EAST SPECIALIZED CABLE (MESC)

MUSCAT-- Yes Based on TS&SD letters # 10-02435-03032301 dated 06/09/2010 & 10-02611-03032301 dated 02/10/2010, it is pre-qualified for LV Power& Control Cables (0.6/1kV) rating as confirming to SEC specification # 11-TMSS-10,Rev.0, with the following condition:

• Ten (10) years extended warranty for the proposed LV Power& Control Cables from the date of PAC of the turnkey project in case of contract award or date of delivery in case of direct material supply order. This was confirmed by Oman Cables Industry through letter # Nil dated 21/08/2010.

OMAN CABLE INDUSTRIES

Page 44 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

Saudi Arabia-RIYADH YesRIYADH CABLES

Saudi Arabia-JEDDAH YesSAUDI CABLE

KOREA, Republic of YesTAIHAN ELECTRIC WIRE COMPANY

United Arab Emirates-Sharjah Yes FOR CABLES WITH COPPER CONDUCTOR WITH ARMOR PER CLAUSE 4.3.5.b, 4.3.5.c and 4.3.5.d ONLY;TYPE TEST CERTIFICATE FROM INDEPENDENT LAB TO BE SUBMITTED FOR 1ST ORDER; EXTENDED QUARANTEE FOR 10 YEARS.

TEKAB Co. Ltd.

11Total =

19 CONDUCTOR FITTINGS/CABLE ACCESSORIES

CABLE SPLICE & TERMINATION KITS UP TO 132 KV119 .

CABLE SPLICE & TERMINATION KITS UP TO 132 KV19. 1. 1 12-TMSS-10Applicable Standards:

--- Yes APPROVED POWER CABLE MANUFACTURERS UP TO 132KV ARE ACCEPTABLE SUPPLIERS FOR SPLICE AND TERMINATION KITS OF THE SAME RATING

*

SWITZERLAND YesABB

SWITZERLAND YesBRUGG CABLE

United Kingdom YesDAITWEILER

United States YesELASTIMOLD

JAPAN YesFUJIKURA VISCAS CORP

United States Yes SUSPENDED FOR ALL ONGOING & FUTURE PROJECTS DUE TO FREQUENT FAILURE & VERY POOR FOLLOWUP RESPONSE FROM THE MANUFACTURER.

G & W

JAPAN YesJ-POWER SYSTEM CORP.

KOREA, Republic of Yes PREVIOUSLY LGLS CABLES

SWITZERLAND YesNEXAN

SWITZERLAND Yes PREVIOUSLY SEFAG IXOSILPFISTERER IXOSIL

GERMANY-BERLIN YesPIRELLI

GERMANY YesRAYCHEM

Saudi Arabia-DAMMAM Yes LIMITED TO 69KV ONLY. UNDER THE GROUP OF TYCORAYCHEM

KOREA, Republic of YesTAIHAN ELECTRIC WIRE COMPANY

15Total =

CABLE SPLICE & TERMINATION KITS UP TO 230 KV219 .

Page 45 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

CABLE SPLICE & TERMINATION KITS UP TO 230 KV19. 2. 1 12-TMSS-10Applicable Standards:

--- Yes APPROVED 230 KV POWER CABLE MANUFACTURERS ARE ALSO ACCEPTABLE SUPPLIERS FOR SPLICE AND TERMINATION KITS OF THE SAME RATING

*

GERMANY YesABB

2Total =

CABLE SPLICE & TERMINATION KITS UP TO 380 KV319 .

CABLE SPLICE & TERMINATION KITS UP TO 380 KV19. 3. 0 12-TMSS-10Applicable Standards:

--- Yes APPROVED 380 KV POWER CABLE MANUFACTURERS ARE ALSO ACCEPTABLE SUPPLIERS FOR SPLICE AND TERMINATION KITS OF THE SAME RATING

*

JAPAN YesJ-POWER SYSTEM CORP.

KOREA, Republic of Yes PREVIOUSLY LGLS

3Total =

20 CONNECTORS, OVERHEAD LINE COMPRESSION TYPE

020 .

CONNECTORS, OVERHEAD LINE COMPRESSION TYPE20. 0. 0 12-TMSS-02Applicable Standards:

ITALY-MILANO YesA SALVI & C SPA

United States YesALCOA

United States YesBURNDY

ITALY YesCAROBENI

Croatia/Hrvatska Yes Based on TS&SD fax # 10-01179-03032301 dated April 20, 2010, this manufacturer is pre-qualified for Compression Type Connectors for O/H T/L per 12-TMSS-02, Rev.0 with the following conditions:• Each new design of Compression Type Connectors for O/H T/L which has NOT been type tested/supplied to SEC before, shall be type tested as per 12-TMSS-02. • Extended warranty of 10 years.

DALEKOVOD

United States YesELASTIMOLD

United States YesHOMAC

SPAIN YesINDUSTRIAS ARRUTI

Page 46 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

ITALY YesISELFA

AUSTRIA YesMOSDORFER

SWITZERLAND Yes PREVIOUSLY SEFAG AGPFISTERER

SWEDEN Yes PREVIOUSLY SEFAGPFISTERER

TURKEY-Ankara (Polatli Plant) & Yes Based on TS&SD fax ref.#09-00087-03032301 dated 11/01/2009. Pre-Qualified for TL & S/S Lattice Steel Structure, Line Hardware and Compression Type Connector for T/L O/H upto 380kV except Space Damper upto 230kV with the following conditions: -All tests shall be carried out in presence of (3) SEC engineers. -(10) years warranty

SA_RA Energy, Construction, Trade and Industry Co. Inc.

FRANCE-FEUGEROLLE & YesSICAMEX

FRANCE-- Yes PREVIOUSLY AS FCI(SAAE), FRANCE.SM-CI

15Total =

21 INSULATORS

PORCELAIN INSULATORS121 .

STATION POST INSULATOR PORCELAIN, UP TO 132 KV, 230 KV and 380 KV21. 1. 1 15-TMSS-01Applicable Standards:

ITALY Yes Approved Only Up To 132 KV OnlyDIELVE

GERMANY-ROSENTHAL YesLAPP

United States Yes .LAPP

JAPAN Yes .NGK

Page 47 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

AUSTRIA Yes Based on TS&SD/ESD e-mail dated 07/07/2010 and PPC Insulators (Austria) Letter # Nil dated 4th July 2010, it is pre-qualified for Station Post Insulator Porcelain, up to 132kV, 230kV&380kV as confirming to SEC specification # 15-TMSS-01, Rev.0 with the following conditions:

A) Type tests conducted in presence of SEC Engineers on 132kV-10.9KN (Drawing # 124-11740-132-101), 230kV-10.3KN (Drawing # 124-11850-132-101) and 380kV-12KN (Drawing # 124-11860-132-101 & 124-11870-132-801) Insulators.

B) Any new type of Insulators (other than the types which are mentioned in A) offered by PPC shall Type Tested in presence of three (3) SEC Engineers and one (1) Approved Independent Agency Inspector.

C) Ten (10) years warranty from the date of PAC of the turnkey project in case of contract award or date of delivery in case of direct material supply order.

PPC INSULATORS

GERMANY Yes .SIEMENS

INDIA Yes Approved Only Up To 132 KV OnlyW.S.I

7Total =

OHL PORCELAIN INSULATOR UP TO 380 KV21. 1. 2 15-TMSS-02,15-TMSS-03Applicable Standards:

GERMANY-N/A YesCERAMTEC

ITALY YesDIELVE

GERMANY-ROSENTHAL YesLAPP

JAPAN YesNGK

GERMANY YesSIEMENS

5Total =

LONG ROD PORCELAIN INSULATORS UP TO 380 KV21. 1. 3 15-TMSS-04Applicable Standards:

GERMANY-ROSENTHAL YesLAPP

JAPAN YesNGK

Page 48 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

GERMANY Yes Based on TS&SD/ESD e-mail dated 07/07/2010 and PPC Insulators (Germany) Letter # Nil dated 4th July 2010, it is pre-qualified for Long Rod Porcelain Insulators up to 380kV as confirming to SEC specification # 15-TMSS-04, Rev.01 with the following conditions:

A) Type tests conducted in presence of SEC Engineers on 160KN:LG75/18+17/1450 (Drawing # 11134-339900-B) and 330KN: LG105/18+17/1545 (Drawing # 11134-621400-A) Insulators.

B) Any new type of Insulators (other than the types which are mentioned in A) offered by PPC shall Type Tested in presence of three (3) SEC Engineers and one (1) Approved Independent Agency Inspector.

C) Ten (10) years warranty from the date of PAC of the turnkey project in case of contract award or date of delivery in case of direct material supply order.

PPC INSULATORS

GERMANY YesSIEMENS

4Total =

OHL GLASS INSULATOR UP TO 380KV221 .

OHL GLASS INSULATOR UP TO 380KV21. 2. 0 15-TMSS-02Applicable Standards:

BRAZIL Yes COMPLETE SAMPLE, TYPE & ROUTINE TESTS FOR THE FIRST ORDER IS REQUIRED.

SEDIVER

ITALY Yes Complete Sample, Type & Routine Tests for the first order is required.

SEDIVER

2Total =

OHL COMPOSITE INSULATORS321 .

OHL COMPOSITE INSULATORS UP TO 230KV21. 3. 1 15-TMSS-05Applicable Standards:

ITALY Yes Up To 132 kV only. Complete Type, Routine / Sample tests for first order & 10 Years Warranty from the date of PAC is required.

E.B.REBOSIO S.r.L

HUNGARY-BUDAPEST YesFCI (FURUKAWA COMPOSITE INSULATORS LTD)

GERMANY-ROSENTHAL YesLAPP

United States-ILLINOIS YesMACLEAN POWER SYSTEM

United States YesNGK LOCKE INC.

Page 49 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

SWITZERLAND Yes It is pre-qualified for Composite Suspension & Tension insulators up to 380 kV, Composite Line Post insulators up to 132 kV per SEC Specification 15-TMSS-05, Rev.0 with the following conditions based on TS&SD letter# 10-02374-03032301 dated August 18, 2010:

A) Type Tests have been conducted in presence of SEC Engineers on:• 110KV, 120KN (Drawing # 138 206 -393A) and 160KN (Drawing # 138 206 -667A) at 40 kA.• 380KV, 160KN (Drawing # 138 206 -588BC) at 50kA. However, the manufacturer shall perform the Power Arc Test only at 63kA.

B) Any new type of Insulators (other than the types which are mentioned in A) offered by PFISTERRER SEFAG AG – Switzerland shall be Type Tested in presence of three (3) SEC Engineers and one (1) Approved Independent Agency Inspector.

C) Ten (10) years warranty from the date of PAC.

PFISTERER SEFAG AG

BRAZIL Yes COMPLETE SAMPLE, TYPE & ROUTINE TESTS FOR THE FIRST ORDER IS REQUIRED

SEDIVER

CHINA-- Yes MOLDED DESIGN ONLY; UPTO 132KV ONLY; ALL THE TYPE/SPECIAL / ROUTINE TESTS TO BE CARRIED OUT FOR FIRST CONTRACT/PROJECT AT SEC APPROVED INDEPENDENT LAB IN PRESENCE OF 3 SEC ENGRS & A THIRD PARTY INSPECTOR APPROVED BY SEC; 10 YEARS EXTENDED WARRANTY

XIANGFAN GUOWANG

8Total =

OHL COMPOSITE INSULATORS UP TO 380KV21. 3. 2 15-TMSS-05Applicable Standards:

GERMANY-ROSENTHAL Yes FIRST BATCH OF EVERY NEW TYPE OF 380KV INSULATOR TO BE TYPE TESTED IN PRESENCE OF 3 SEC ENGINEERS AND ONE SEC APPROVED INDEPENDENT INSPECTOR; EXTENDED WARRANTY OF 10 YEARS

LAPP

United States-ILLINOIS Yes *All type/design & special tests were performed for first batch at Independent lab. in presence of SEC/IIA Inspectorbased on TS&SD fax#09-F00306-030323001 dated 17/02/2009.-Extended 10(ten) year guarantee/warranty is required.

MACLEAN POWER SYSTEM

Page 50 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

United States Yes Based on TS&SD letter # 10-F02356/02-03032301 dated 22/11/2010, it is pre-qualified for 380kV Composite Insulators with the following conditions:

• Manufacturer shall conduct/repeat the following tests on the 380kV Composite Insulators 160kN, Cat.# 402-SL1370-SK-95 using test series X (Note: Type tests using test series Y on the 380kV Composite Insulators,160kN , Cat.# 402-SL1370-SK-95 have already been conducted satisfactory by the manufacturer in the presence of SEC engineers).1. Power Arc Test (by using test series X) as per IEC 61467.2. High Pressure Water Withstand Test followed by Electrical Test and Verification of the Specified Mechanical Load (SML) as per IEC 61109

• Any new type of composite insulator (other than type Cat. # 402-SL1370-SK-95) offered by NGK Locke Polymer Insulators Inc.(USA) shall be subjected to all type, special ,sample and routine tests as per SEC standards specifications in the presence of three (03) SEC engineers & one (01) SEC approved independent inspection agency(IIA) Inspector.

• Ten (10) years extended warranty from the date of PAC of the turnkey project in case of contract award or date of delivery in case of direct material supply order.

NGK LOCKE

SWITZERLAND Yes It is pre-qualified for Composite Suspension & Tension insulators up to 380 kV, Composite Line Post insulators up to 132 kV per SEC Specification 15-TMSS-05, Rev.0 with the following conditions based on TS&SD letter# 10-02374-03032301 dated August 18, 2010:

A) Type Tests have been conducted in presence of SEC Engineers on:• 110KV, 120KN (Drawing # 138 206 -393A) and 160KN (Drawing # 138 206 -667A) at 40 kA.• 380KV, 160KN (Drawing # 138 206 -588BC) at 50kA. However, the manufacturer shall perform the Power Arc Test only at 63kA.

B) Any new type of Insulators (other than the types which are mentioned in A) offered by PFISTERRER SEFAG AG – Switzerland shall be Type Tested in presence of three (3) SEC Engineers and one (1) Approved Independent Agency Inspector.

C) Ten (10) years warranty from the date of PAC.

PFISTERER SEFAG AG

BRAZIL Yes COMPLETE SAMPLE, TYPE & ROUTINE TESTS FOR THE FIRST ORDER IS REQUIRED

SEDIVER

5Total =

Page 51 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

22 LINE INSULATOR HARDWARE FITTINGS

HARDWARE FITTINGS122 .

HARDWARE FITTINGS22. 1. 0 12-TMSS-01Applicable Standards:

United States-Centralia, MO YesA B CHANCE

ITALY-MILANO YesA SALVI & C SPA

United States YesALCOA

ITALY YesCAROBENI

Croatia/Hrvatska Yes Based on TS&SD fax # 10-01179-03032301 dated April 20, 2010, this manufacturer is pre-qualified for Line Hardware except Spacer Dampers per 12-TMSS-01, Rev.0 with the following conditions:• Each new design of hardware which has NOT been type tested/supplied to SEC before, shall be type tested as per 12-TMSS-01. • Extended warranty of 10 years.

DALEKOVOD

ITALY YesDAMP

FRANCE Yes Previously "SM-CI-France", the name has been change to DERVAUX-France based on DERVAUX-France letter # Nil dated 13/10/2009.

DERVAUX

SPAIN YesINDUSTRIAS ARRUTI

ITALY YesISELFA

United States YesJOSLYN

AUSTRIA-WEIZ YesMOSDORFER GMBH

SWEDEN Yes PREVIOUSLY SEFAGPFISTERER

SWITZERLAND Yes PREVIOUSLY SEFAG AGPFISTERER

United States YesPREFORMED LINE PRODUCTS (PLP)

TURKEY-Ankara (Polatli Plant) & Yes Based on TS&SD fax ref.#09-00087-03032301 dated 11/01/2009. Pre-Qualified for TL & S/S Lattice Steel Structure, Line Hardware and Compression Type Connector for T/L O/H upto 380kV except Space Damper upto 230kV with the following conditions: -All tests shall be carried out in presence of (3) SEC engineers. -(10) years warranty

SA_RA Energy, Construction, Trade and Industry Co. Inc.

FRANCE-FEUGEROLLE & YesSICAMEX

16Total =

OBSTRUCTION MARKERS AND CONDUCTOR LIGHTING222 .

Page 52 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

OBSTRUCTION MARKERS AND CONDUCTOR LIGHTING22. 2. 0 12-TMSS-03Applicable Standards:

Saudi Arabia YesBP SOLAR ARABIA LTD

FRANCE YesDERVAUX

FRANCE YesOBSTA

United States YesP&R TECHNOLOGIES

SWITZERLAND Yes PREVIOUSLY SEFAG AGPFISTERER SEFAG

KOREA, Republic of YesSHIN SEONG IND CORP.

FRANCE-- Yes PREVIOUSLY AS FCI(SAAE), FRANCE.SM-CI

United States YesTANA WIRE MARKER

8Total =

23 LINE SUPPORT STRUCTURE

SUBSTATION STEEL STRUCTURE (LATTICED)123 .

SUBSTATION STEEL STRUCTURE (LATTICED)23. 1. 0 20-TMSS-01Applicable Standards:

Saudi Arabia-RIYADH YesAL BABTAIN

Saudi Arabia-Jeddah Yes Based on TS&SD letter # 11-03472-03032301 dated 09/01/2011, it is pre-qualified for Substation Steel Structure (Latticed) up to 132kV as confirming to SEC specification # 20-TMSS-01, Rev.0 with the following conditions:

• Any Substation Steel Structure (Latticed) of new design proposed by Al-Yamamah Electric Power Towers Factory, Jeddah (except for the pervious approved design and drawings provided by SEC to the manufacturer) shall be subjected to full-scale loading tests and other type, routine and special tests as per SEC standards specifications and relevant International Standards in the presence of three (03) SEC engineers & one (01) SEC approved independent inspection agency (IIA) Inspector and all cost pertaining to the tests shall be borne by the manufacturer.

• Ten (10) years extended warranty from the date of PAC of the turnkey project in case of contract award or date of delivery in case of direct material supply order. This was confirmed in writing by Al-Yamamah Electric Power Towers Factory, Jeddah through letter # Nil dated 21st October 2009.

Al Yamamah Electric Powers Factory

Saudi Arabia-DAMMAM YesAL ZAMIL STEEL

Page 53 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

EGYPT-N/A Yes FIRST LOT OF EACH TYPE OF STRUCTURE SHALL BE TYPE TESTED IN AN INDEPENDENT LAB IN PRESENCE OF SEC ENGINEERS; 10 YEARS EXTENDED WARRANTY.

AL-BABTAIN POWER&TELECOM CO.

Saudi Arabia-Riyadh Yes Based on TS&SD letter# 08-1058/1-03032301 dated 25th May 2009 it is pre-qualified for Transmission Towers for projects up to 132kV, Substation & Gantry Steel Structures up to 380kV and Communications Tower for transmission sector as confirming to SEC specification # 20-TMSS-01, rev.0 with the following conditions:• All type, routine & special tests including the load test shall be carried out on the first batch to be supplied to SEC in securing an order in the manufacturer's testing laboratory in the presence of three (3) SEC engineers & one (1) approved independent inspection agency Inspector. • Ten (10) years warranty from the date of PAC of the turnkey project in case of contract award or date of delivery in case of direct material supply order.

Alfanar Steel

Saudi Arabia-JEDDAH YesARABIAN INTERNATIONAL CO.

Saudi Arabia-Rabigh Yes Based on TS&SD letter# 09-2179/07-03032301 dated 11th. Nov 2009 & approval of Executive Directive for TS&SD letter# 09-02179/06-03032301 dated 11th Nov 2009, it is pre-qualified for Transmission Line, Substation Steel Structures and Communication Towers as confirming to SEC specification # 20-TMSS-01, rev.0 with the following conditions:• The approval will be initially restricted to the following items only:1. Transmission Towers for projects up to 132kV.2. Substation Steel Structures and Gantry Steel Structures for projects up to 380kV.3. Communication Towers for Transmission Sector.• All type, design, special & routine tests (including the load test) as per SEC specifications/standards and all relevant international standards shall be carried out on the first batch to be supplied to SEC in securing an order in the presence of three (3) SEC engineers & one (1) approved independent inspection agency Inspector. • Ten (10) years warranty from the date of PAC of the turnkey project in case of contract award or date of delivery in case of direct material supply order.

Energya Steel Solution (Hesham Helal El Sewedy & Partners for Steel Industries Co.)

Saudi Arabia-AL KHOBAR YesGEYARD FOR COMMERCE AND IMPORT CO.

Saudi Arabia-JEDDAH YesHIDADA

INDIA-- Yes NAGPUR-BUTIPORI, JABALPUR, JAIPUR PLANTS ARE ACCEPTABLE; ALL THE TESTS SHALL BE CARRIED OUT FOR FIRST CONTRACT/PROJECT IN PRESENCE OF THREE (3) SEC ENGINEERS; 10 YEARS OF EXTENDED WARRANTY.

KEC INTERNATIONAL LTD.

INDIA-CHENNAI YesLARSEN & TOUBRO LTD.

Page 54 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

Saudi Arabia YesNAJEM

TURKEY-Ankara (Polatli Plant) & Yes Based on TS&SD fax ref.#09-00087-03032301 dated 11/01/2009. Pre-Qualified for TL & S/S Lattice Steel Structure, Line Hardware and Compression Type Connector for T/L O/H upto 380kV except Space Damper upto 230kV with the following conditions: -All tests shall be carried out in presence of (3) SEC engineers. -(10) years warranty

SA_RA Energy, Construction, Trade and Industry Co. Inc.

13Total =

T/L STEEL STRUCTURE (LATTICED) UP TO 380 KV223 .

T/L STEEL STRUCTURE (LATTICED) UP TO 380 KV23. 2. 0 20-TMSS-01Applicable Standards:

Saudi Arabia-RIYADH YesAL BABTAIN

Saudi Arabia-Jeddah Yes Based on TS&SD letter # 11-03472-03032301 dated 09/01/2011, it is pre-qualified for Transmission Line Structure (Latticed) up to 132kV as confirming to SEC specification # 20-TMSS-01, Rev.0 with the following conditions:

• Any Transmission Line Structure (Latticed) of new design proposed by Al-Yamamah Electric Power Towers Factory, Jeddah (except for the pervious approved design and drawings provided by SEC to the manufacturer) shall be subjected to full-scale loading tests and other type, routine and special tests as per SEC standards specifications and relevant International Standards in the presence of three (03) SEC engineers & one (01) SEC approved independent inspection agency (IIA) Inspector and all cost pertaining to the tests shall be borne by the manufacturer.

• Ten (10) years extended warranty from the date of PAC of the turnkey project in case of contract award or date of delivery in case of direct material supply order. This was confirmed in writing by Al-Yamamah Electric Power Towers Factory, Jeddah through letter # Nil dated 21st October 2009.

Al Yamamah Electric Powers Factory

Saudi Arabia-DAMMAM YesAL ZAMIL STEEL

EGYPT-N/A Yes FIRST LOT OF EACH TYPE OF STRUCTURE SHALL BE TYPE TESTED IN AN INDEPENDENT LAB IN PRESENCE OF SEC ENGINEERS; 10 YEARS EXTENDED WARRANTY.

AL-BABTAIN POWER&TELECOM CO.

Page 55 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

Saudi Arabia-Riyadh Yes Based on TS&SD letter# 08-1058/1-03032301 dated 25th May 2009 it is pre-qualified for Transmission Towers for projects up to 132kV, Substation & Gantry Steel Structures up to 380kV and Communications Tower for transmission sector as confirming to SEC specification # 20-TMSS-01, rev.0 with the following conditions:• All type, routine & special tests including the load test shall be carried out on the first batch to be supplied to SEC in securing an order in the manufacturer's testing laboratory in the presence of three (3) SEC engineers & one (1) approved independent inspection agency Inspector. • Ten (10) years warranty from the date of PAC of the turnkey project in case of contract award or date of delivery in case of direct material supply order.

Alfanar Steel

Saudi Arabia-JEDDAH Yes ONE TRIAL PROJECT FOR 110/132 KV SHORT LINE.AL-SALAM INSDUTRIES AND TRADING EST./ADVANCE TECHNOLOGIES.

Saudi Arabia-JEDDAH YesARABIAN INTERNATIONAL CO.

Saudi Arabia-Rabigh Yes Based on TS&SD letter# 09-2179/07-03032301 dated 11th. Nov 2009 , it is pre-qualified for Transmission Line, Substation Steel Structures and Communication Towers as confirming to SEC specification # 20-TMSS-01, rev.0 with the following conditions:• The approval will be initially restricted to the following items only:1. Transmission Towers for projects up to 132kV.2. Substation Steel Structures and Gantry Steel Structures for projects up to 380kV.3. Communication Towers for Transmission Sector.• All type, design, special & routine tests (including the load test) as per SEC specifications/standards and all relevant international standards shall be carried out on the first batch to be supplied to SEC in securing an order in the presence of three (3) SEC engineers & one (1) approved independent inspection agency Inspector. • Ten (10) years warranty from the date of PAC of the turnkey project in case of contract award or date of delivery in case of direct material supply order.

Energya Steel Solution (Hesham Helal El Sewedy & Partners for Steel Industries Co.)

Saudi Arabia-JEDDAH YesHIDADA

INDIA-Gujarat Yes Based on TS&SD letter 09-00665/1-03032301 dated 16th. March 2009 for Galvanised Transmission line Lattice Steel Tower up to 380kV as conforming to SEC specifications # 20-TMSS-01, rev.0; with the following conditions:• Ten (10) years extended warranty.• Improvement needs indicated in the plant survey report.• All the tests shall be carried out for first contract/project in presence of three (3) sec engineers & independent Inspector.

KALPATARU Power Transmission Ltd.

Page 56 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

INDIA-- Yes NAGPUR-BUTIPORI, JABALPUR, JAIPUR PLANTS ARE ACCEPTABLE; ALL THE TESTS SHALL BE CARRIED OUT FOR FIRST CONTRACT/PROJECT IN PRESENCE OF THREE (3) SEC ENGINEERS; 10 YEARS OF EXTENDED WARRANTY.

KEC INTERNATIONAL LTD.

INDIA-CHENNAI YesLARSEN & TOUBRO LTD.

TURKEY-Ankara (Polatli Plant) & Yes Based on TS&SD fax ref.#09-00087-03032301 dated 11/01/2009. Pre-Qualified for TL & S/S Lattice Steel Structure, Line Hardware and Compression Type Connector for T/L O/H upto 380kV except Space Damper upto 230kV with the following conditions: -All tests shall be carried out in presence of (3) SEC engineers. -(10) years warranty

SA_RA Energy, Construction, Trade and Industry Co. Inc.

13Total =

STEEL POLES, TUBULAR UP TO 230 KV323 .

STEEL POLES, TUBULAR UP TO 230 KV23. 3. 0 20-TMSS-02Applicable Standards:

Saudi Arabia-RIYADH YesAL BABTAIN

Saudi Arabia-Rabigh Yes Based on TS&SD Letter # 10-0331/06-03032301 dated 28/06/2010, it is pre-qualified for Steel Poles, Tubular up to 230kV as confirming to SEC specification # 20-TMSS-02. Rev.0 with the following conditions:

• All Type, Routine and Special Tests including the load test per SEC specification # 20-TMSS-02 and all relevant International Standards shall be conducted on the first batch in presence of three (3) SEC Engineers and one (1) SEC approved independent inspection agency (IIA) Inspector and related cost pertaining to the test shall be borne by Hesham Helal EL Sewedy & Partners for Steel Industries Co.(Energya Steel Solutions) as confirmed by manufacturer through letter # SEC/WK/100524 dated 24th May 2010.

• Ten (10) years extended warranty from the date of PAC of the turnkey project in case of contract award or date of delivery in case of direct material supply order as confirmed by Hesham Helal EL Sewedy & Partners for Steel Industries Co.(Energya Steel Solutions) letter # SEC/WK/100524 dated 24th May 2010 .

Energya Steel Solution (Hesham Helal El Sewedy & Partners for Steel Industries Co.)

Saudi Arabia-JEDDAH YesHIDADA

FRANCE YesPETIT JEAN

United States-PA YesSUMMIT MANUFACTURING

ITALY YesTECHNOPALI

United States YesVALMONT

Page 57 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

7Total =

WOOD POLES523 .

WOOD POLES, ANSI CLASS HI – H 323. 5. 1 Applicable Standards:

United States-GEORGIA YesATLANTIC WOOD IND.

United States-ALABAMA YesCAHABA PRESSURE TREATED FOREST PRODUCT (NORTH PACIFIC GROUP)

United States-LOUISIANA YesCOLFAX CREOSOTING CO

United States-PA YesKOPPERS INDUSTRIES

United States-ALABAMA YesSTALLWORTH TIMBER

CANADA-NEW WESTMINSTER YesSTELLA JONES INC.

United States-OREGON YesTAYLOR LUMBER (NORTH PACIFIC GROUP)

7Total =

WOOD POLES, ANSI CLASS I - 423. 5. 2 Applicable Standards:

United States-GEORGIA YesATLANTIC WOOD IND.

United States-ALABAMA YesCAHABA PRESSURE TREATED FOREST PRODUCT (NORTH PACIFIC GROUP)

United States-LOUISIANA YesCOLFAX CREOSOTING CO

United States-PA YesKOPPERS INDUSTRIES

United States-ALABAMA YesSTALLWORTH TIMBER

CANADA-NEW WESTMINSTER YesSTELLA JONES INC.

United States-OREGON YesTAYLOR LUMBER (NORTH PACIFIC GROUP)

7Total =

24 GALVANIZED GUY WIRE (GROUNDING)

.024 .

GALVANIZED GUY WIRE (GROUNDING)24. 0. 0 10-TMSS-02Applicable Standards:

United States YesFLORIDA WIRE & CABLE

United States YesJOSLYN

United States YesSOUTHWIRE

Page 58 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

FRANCE YesTREFILEUROPE

4Total =

25 RACEWAYS

METAL ENCLOSED BUS DUCT, 4.16 – 13.8 KV OR 34.5 KV125 .

METAL ENCLOSED BUS DUCT, 4.16 – 13.8 KV OR 34.5 KV25. 1. 0 Applicable Standards:

United States-N/A YesABB ( T& D)

United States YesUNIBUS

Saudi Arabia-DAMMAM YesWESCOSA

3Total =

CABLE TRAY SYSTEMS225 .

CABLE TRAY SYSTEMS25. 2. 0 24-TMSS-01Applicable Standards:

United States-Minnesota Yes3M

SWEDEN-sweden YesAB WIRE

Saudi Arabia- DHAHRAN YesABAHSAIN-COPE

Saudi Arabia-RIYADH Yes FOR LADDERS & ACCESSORIES ALSO; 10 YEARS OF EXTENDED WARRANTY;

AL-AMAL CO.

Saudi Arabia-Riyadh Yes Based on TS&SD letter 09-00509/1-03032301 dated 16th. March 2009 for Metallic Cable Tray Systems as conforming to SEC specifications # 24-TMSS-01, rev.0; with the following conditions:• Ten (10) years extended warranty.• Improvement needs indicated in the plant survey report

AL-MISBAH House for Steel Works

Saudi Arabia-JEDDAH YesARABIAN INTERNATIONAL CO.

United States YesEFCOR

Saudi Arabia-Riyadh Yes based on TS&SD letter 09-00524/1-03032301 dated 16th. March 2009 for Metallic Cable Tray Systems as conforming to SEC specifications # 24-TMSS-01, rev.0; with the following conditions:• Eight (8) years extended warranty.• Improvement needs indicated in the plant survey report.

ELECTROLINK Co. Ltd.

Saudi Arabia-JEDDAH YesHIDADA

Saudi Arabia- AL-KHOBAR YesMECSS - MID EAST CABLE SUPPORT SOLUTIONS

Page 59 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

United States YesO-Z GEDNEY

Saudi Arabia-JEDDAH YesSAUDI ELECTRIC INDUSTRIES CO. LTD.

FRANCE YesTOLARTOIS

Saudi Arabia-DAMMAM YesWESCOSA

14Total =

26 CONDUIT FITTINGS

DUCT SEALING UNITS126 .

DUCT SEALING UNITS26. 1. 0 23-TMSS-02Applicable Standards:

Saudi Arabia-DAMMAM YesAMIANTIT RUBBER IND. (ARIL)

United Arab Emirates YesUM- AL QUWAIN RUBBER INDUSTRIES

2Total =

27 SWITCHES

DISCONNECT SWITCH, AIR BREAK, UP TO 380 KV127 .

DISCONNECT SWITCH, AIR BREAK, UP TO 380 KV27. 1. 0 30-TMSS-01Applicable Standards:

United States-N/A YesABB ( T& D)

SWITZERLAND YesALPHA NIDAU

FRANCE YesAREVA

PORTUGAL YesEFACEC

NETHERLANDS YesHAPAM

JAPAN YesJAPAN AE POWER SYSTEMS CORP.

FRANCE YesMG/EGIC

United States YesS & C

FRANCE YesSDCEM

GERMANY YesSIEMENS

United States Yes SOUTHERN STATES/ USA HAS ACQUIRED SIEMENS SWITCH FACTORY

SOUTHERN STATES

11Total =

Page 60 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

LV AUTO-TRANSFER SWITCH227 .

LV AUTO-TRANSFER SWITCH27. 2. 0 Applicable Standards:

FRANCE YesALSTOM

United Arab Emirates YesASCO

United States YesWESTINGHOUSE

3Total =

PAD MOUNTED SF6/OIL SWITCH, 34.5 KV327 .

PAD MOUNTED SF6/OIL SWITCH, 34.5 KV27. 3. 0 Applicable Standards:

GERMANY YesFRITZ DRIESHER KG

1Total =

28 LV PANELS & ENCLOSURES

RELAY & CONTROL PANEL128 .

RELAY & CONTROL PANEL28. 1. 0 31-TMSS-01Applicable Standards:

SWEDEN YesABB

Saudi Arabia YesABB/AEIL

United Kingdom YesACRASTYLE

Saudi Arabia-JEDDAH YesAEL -SIEMENS

Saudi Arabia-RIYADH Yes Based on TS&SD letter# 09-01251-03032301 dated 03rd. May 2009 UP TO 380KV as confirming to SEC specification # 31-TMSS-01, rev.0 with Ten (10) years warranty from the date of PAC of the Turnkey project in case of contract award or date of delivery in case of direct material supply order.

ALFANAR ELECTRICAL SYSTEMS

United Kingdom YesAREVA

United Kingdom YesCRUINKSHANK & PARTNERS LTD.

Saudi Arabia-RIYADH YesEPS LTD. (GROUPE SCHNEIDER)

United Arab Emirates-DUBAI Yes Type/design, special, routine tests shall be performed for first project at an independent laboratory in the presence of 3rd party & 3 SEC Engineers. Extended warranty for 10 years.

ETA-PCS

Page 61 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

Saudi Arabia-KHOBAR Yes UP TO 132kV ONLY; FIRST BATCH OF RELAY & CONTROL PANEL SHALL BE TYPE TESTED IN AN INDEPENDENT LAB. IN THE PRESENCE OF THREE SEC ENGRS & ONE IIA INSPECTOR; EXTENDED GUARANTEE FOR TEN(10) YEARS.

JAL INTERNATIONAL

KOREA, Republic of Yes PREVIOUSLY LGLS

Saudi Arabia-Riyadh Yes Extended warranty for 10 years.MOHD. AL-OJAIMI LTD.

FRANCE-- Yes 10 YEAR EXTENDED WARRANTYPROTEA/AREVA T&D

United Kingdom YesREYROLLE LTD.

FRANCE-GRENOBLE YesSCHNEIDER H.V FACTORY

GERMANY YesSIEMENS

Saudi Arabia-Riyadh Yes based on TS&SD letter# 09-01500-03032301 dated May 25, 2009 & 10-01055/02-03032301 dated May 03, 2010, System House Factory for Electric Panels (SEP) from Saudi Arabia-Riyadh for Relay & Control Panel up to 132kV as confirming to SEC specification # 31-TMSS-01, rev.0 with the following condition:• Ten (10) years warranty from the date of PAC of the turnkey project in case of contract award or date of delivery in case of direct material supply order.

System House Factory for Electric Panels (SEP)

Saudi Arabia-DAMMAM YesTIEPCO

Saudi Arabia-RIYADH Yes ASSEMBLING UP TO 132KV ONLY, ENCLOSURES SHALL BE PROCURED FROM MESCO (RIYADH)

VA TECH

Saudi Arabia-DAMMAM Yes UP TO 132KV ONLYWESCOSA

20Total =

ANNUNCIATOR SYSTEM228 .

ANNUNCIATOR SYSTEM28. 2. 0 38-TMSS-05Applicable Standards:

FINLAND Yes SACO 16D3ABB SUBSTATION AUTOMATION OY

United States YesAMETEK POWER INSTRUMENTS

JAPAN YesFUJIKURA VISCAS CORP

JAPAN YesJ-POWER SYSTEM CORP.

KOREA, Republic of Yes PREVIOUSLY LGLS

SWITZERLAND YesNEXANS

United States YesPAN ALARM

GERMANY-BERLIN YesPIRELLI

United Kingdom YesRONAN ENGINEERING

Page 62 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

United Kingdom YesRTK ENGINEERING LTD.

GERMANY YesSIEMENS

JAPAN YesSTEINER

12Total =

29 ARRESTER, SURGE OR LIGHTNING

SURGE ARRESTERS, STATION CLASS UP TO 380 KV129 .

SURGE ARRESTERS, STATION CLASS UP TO 380 KV29. 1. 0 35-TMSS-01Applicable Standards:

SWEDEN YesABB

SWITZERLAND YesABB HV TECHNOLOGIES

FRANCE YesAREVA

United Kingdom YesBOWTHORPE

United States YesCOOPER (MCGRAW-ED)

INDIA Yes Upto 132 kV Only - Complete Type, Routine / Acceptance tests for first order & 10 Years Warranty from the date of PAC is required.

ELPRO INTL. LTD

JAPAN YesJAPAN AE POWER SYSTEMS CORP.

JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.MITSUBISHI

United States YesOHIO BRASS

GERMANY YesSIEMENS

JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.TOSHIBA CORPORATION, T&D

GERMANY YesTRIDELTA

Ireland-Shannnon Yes PRODUCT SUPPORT & H.V. TESTING LABORATORY ARE STILL REMAINING IN BRIGHTON U.K.; TYCO TO GIVE EXTENDED GUARANTEE / WARRANTY FOR 5 YEARS FROM THE DATE OF P.A.C IN CASE OF THE TURNKEY PROJECT & FROM THE DATE OF DELIVERY IN CASE OF DIRECT SUPPLY ORDER.

TYCO (BOWTHORPE)

Page 63 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

CHINA Yes Based on TS&SD letter# 09-F01657/02-03032301 dated 14th. Nov 2009, it is pre-qualified for Surge Arrester up to 132kV as confirming to SEC specification # 35-TMSS-01, rev.0 with the following conditions:• All type, design, special & routine tests (including the load test) as per SEC specifications/standards and all relevant international standards shall be carried out on the first batch to be supplied to SEC in securing an order in an independent testing laboratory in the presence of three (3) SEC engineers & one (1) approved independent inspection agency Inspector. • Ten (10) years warranty from the date of PAC of the turnkey project in case of contract award or date of delivery in case of direct material supply order.

Tyco- Bowthorpe

14Total =

30 CIRCUIT BREAKER

DEADTANK SF6 BREAKER130 .

DEADTANK SF6 BREAKERS, 69 KV30. 1. 1 37-TMSS-01Applicable Standards:

United States-N/A YesABB ( T& D)

United States-CHARLEROI YesAREVA

United States-GEORGIA YesGE-HITACHI HVB

JAPAN YesJAPAN AE POWER SYSTEMS CORP.

JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.MITSUBISHI

JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.TOSHIBA CORPORATION, T&D

6Total =

DEADTANK SF6 BREAKERS,110 - 132 KV30. 1. 2 37-TMSS-01Applicable Standards:

SWITZERLAND YesABB

United States-N/A YesABB ( T& D)

Page 64 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

United States-Charleroi Yes Based on TS&SD letter # 10-02708-02-03032301 dated 25/10/2010, it is pre-qualified for 145kV Dead Tank Circuit Breaker type DT1-145FK, 40KA, 2000A as confirming to SEC specification # 37-TMSS-01, Rev.0, with the following condition:

• Ten (10) years extended warranty for the proposed 145kV Dead Tank Circuit Breaker type DT1-145FK from the date of PAC of the turnkey project in case of contract award or date of delivery in case of direct material supply order. This was confirmed in writing by AREVA T&D, Inc-USA through letter #Nil dated 6th March 2009.

AREVA T&D Inc.-USA

United States-GEORGIA YesGE-HITACHI HVB

JAPAN YesJAPAN AE POWER SYSTEMS CORP.

JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.MITSUBISHI

United States YesSIEMENS

JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.TOSHIBA CORPORATION, T&D

8Total =

DEADTANK SF6 BREAKERS, 230 KV30. 1. 3 37-TMSS-01Applicable Standards:

United States-N/A YesABB ( T& D)

United States-CHARLEROI Yes TYPE DT1-245 F3; 10 YEARS OF EXTENDED WARRANTY; DI-ELECTRIC TEST, RIV TEST, CONTINUOUS CURRENT TEMPERATURE RISE TEST @ 2500 A, 60HZ IS TO BE CARRIED OUT IN THE FIRST BATCH IN THE PRESENCE OF 3 SEC ENGINEERS AND 1 IIA INSPECTOR.

AREVA

United States-GEORGIA YesGE-HITACHI HVB

JAPAN YesJAPAN AE POWER SYSTEMS CORP.

JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.MITSUBISHI

JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.TOSHIBA CORPORATION, T&D

6Total =

SF6, LIVE TANK230 .

LIVE TANK, 69 KV SF6 BREAKER30. 2. 1 37-TMSS-02Applicable Standards:

SWEDEN YesABB

SWITZERLAND YesABB

SWEDEN-LUDUVIKA YesABB SWITCHGEAR AB

Page 65 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

SWITZERLAND-OBERENTFELDEN YesAREVA

FRANCE-,VILLEUR BANNE YesAREVA_FRANCE,VILLEUR BANNE

GERMANY YesSIEMENS

6Total =

LIVE TANK, 110 - 132 KV SF6 BREAKER30. 2. 2 37-TMSS-02Applicable Standards:

SWEDEN YesABB

GERMANY YesAREVA

FRANCE-,VILLEUR BANNE YesAREVA_FRANCE,VILLEUR BANNE

GERMANY YesSIEMENS

4Total =

LIVE TANK, 230 KV SF6 BREAKER30. 2. 3 37-TMSS-02Applicable Standards:

SWEDEN YesABB

FRANCE-,VILLEUR BANNE YesAREVA_FRANCE,VILLEUR BANNE

GERMANY YesSIEMENS

3Total =

CIRCUIT SWITCHER, 69 –230 KV30. 2. 4 Applicable Standards:

CANADA YesS & C

United States YesS & C

GERMANY YesSIEMENS

3Total =

31 SUPERVISING EQUIPMENT, TELEMETERING EQUIPMENT

LINE TRAP131 .

LINE TRAP31. 1. 0 38-TMSS-01Applicable Standards:

CANADA YesHAEFELY-TRENCH ELECTRIC

SWITZERLAND YesHAEFELY-TRENCH ELECTRIC

2Total =

Page 66 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

LINE TUNER231 .

LINE TUNER31. 2. 0 38-TMSS-02Applicable Standards:

SWITZERLAND YesABB HV TECHNOLOGIES

1Total =

CCVT AND/OR COUPLING CAPACITOR CARRIER331 .

CCPD/CCVT, 69KV UP TO 380 KV31. 3. 1 38-TMSS-08,50-TMSS-02Applicable Standards:

SWEDEN YesABB

SWITZERLAND YesABB HV TECHNOLOGIES

United States YesGE

FRANCE YesHAEFELY-TRENCH ELECTRIC

CANADA YesHAEFELY-TRENCH ELECTRIC

SWITZERLAND YesHAEFELY-TRENCH ELECTRIC

Croatia/Hrvatska-- Yes Limited up to 132kV only. All Type, Special, Routine tests per SEC Standards and IEC to be performed at KONCAR-Electrical Institute Inc. as independent and accredited testing laboratory. Extended guarantee/warrenty for 10 years.

KONCAR INSTRUMENT TRANSFORMERS INC.

JAPAN YesNISSIN

ITALY YesPASSONI & VILLA

SWITZERLAND Yes Based on TS&SD letter# 09-01105-03032301 dated 24th June 2009, it is pre-qualified for CT & CVT rated up to 380kV as confirming to SEC specification # 50-TMSS-03, rev.0 & # 50-TMSS-02, rev.0 respectively with the following conditions:• All type, routine & special tests including the load test shall be carried out on the first batch to be supplied to SEC in securing an order in an independent testing laboratory in the presence of three (3) SEC engineers & one (1) approved independent inspection agency Inspector. • Ten (10) years warranty from the date of PAC of the turnkey project in case of contract award or date of delivery in case of direct material supply order.

PFIFFNER

United States Yes TYPE TEST REQUIRED IN FIRST SUPPLYRITZ

ITALY-N/A Yes PREVIOUSLY AS VA TECH (NOUVA MAGRINI GALILEO)TRENCH ITALIA

12Total =

Page 67 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

REMOTE TERMINAL UNIT (RTU)431 .

REMOTE TERMINAL UNIT (RTU)31. 4. 0 38-TMSS-03Applicable Standards:

GERMANY Yes RTU-560, SPIDER 200,232 & 233ABB

FRANCE YesAREVA

PORTUGAL-Maia Yes Based on TS&SD letter# 09-01819-03032301 dated 23rd June 2009, it is prequalified for for RTU type CLP500 as confirming to SEC specification # 38-TMSS-03, rev.0 with the following conditions:• Type tests shall be carried out on the first batch to be supplied to SEC in securing an order in an independent laboratory in th e presence of three (3) SEC engineers or in the manufacturer's testing laboratory with the additional presence of an engineer from independent testing laboratory. • Ten (10) years warranty from the date of PAC of the turnkey project in case of contract award or date of delivery in case of direct material supply order.

EFACEC Sistemas de Elctronica, S.A

AUSTRALIA YesFOXBORO

CANADA Yes HARRIS D20GE HARRIS

United Arab Emirates-Dubai Yes Ten (10) years extended warranty.Microsol XCell SCADA RTU System

Global Energy Technologies Ltd.

United States-MELBOURNE, Yes HARRIS MICROPLEX 5000HARRIS CORPORATION

Saudi Arabia-KHOBAR Yes ASSEMBLING ONLYJAL INTERNATIONAL

KOREA, Republic of-- Yes SEVEN (7) YEARS EXTENDED WARRANTY.LSIS

Ireland-DUBLIN Yes MICROSOLMICROSOL LTD.

AUSTRIA YesSAT

GERMANY YesSIEMENS

United States-SAN JOSE, CA Yes TELEGYR 5700SIEMENS (LANDYS) - TELEGYR

AUSTRIA YesVA TECH

14Total =

SEQUENCE OF EVENTS RECORDER531 .

SEQUENCE OF EVENTS RECORDER31. 5. 0 38-TMSS-04Applicable Standards:

GERMANY Yes RTU 560ABB

CANADA Yes HARRIS D20GE HARRIS

Page 68 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

United Arab Emirates-Dubai Yes Ten (10) years extended warranty.Microsol XCell SOE RTU System

Global Energy Technologies Ltd.

Saudi Arabia-KHOBAR Yes SOE RECORDING SYSTEM AND INTERFACE & CONTROL CABINET/MARSHALING PANELS

JAL INTERNATIONAL

KOREA, Republic of-- Yes SEVEN (7) YEARS EXTENDED WARRANTY.LSIS

Ireland-DUBLIN Yes MICROSOLMICROSOL LTD.

United States-LOS ANGELES, CA Yes X500E/1000RONAN ENGINEERING

7Total =

TRANSDUCERS631 .

FREQUENCY TRANSDUCERS31. 6. 1 Applicable Standards:

United States YesALSTOM

SLOVENIA-KRANJ Yes ACCEPTANCE SUBJECTED TO SUCCESSFUL PRODUCT EVALUATION / ACCEPTANCE BY SEC CONCERNED END USER DEPARTMENT FOR EACH PURCHASE ORDER / PROJECT DURING TENDER/BIDDING STAGE.

ISKRA MIS

2Total =

TAP POSITION TRANSDUCERS31. 6. 2 Applicable Standards:

United Kingdom YesAREVA

1Total =

TRANSDUCERS31. 6. 3 Applicable Standards:

SWEDEN YesCEWE INSTRUMENTS AB

FRANCE YesENERDIS

KOREA, Republic of-- Yes SEVEN (7) YEARS EXTENDED WARRANTY.LSIS

SWEDEN YesTILLQUIST

Page 69 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

United Kingdom-- Yes Based on TS&SD Letter # 10-F00230/01-03032301 dated 03/02/2010 and Tyco Electronics Letter # INT-SEC-12-01-10 dated 12/01/2010 for Integra 1560, this product was reclassified to this item from item # 32.1.0& item # 32.2.0 with the following conditions:

• All type, special & routine tests as per SEC specifications/standards shall be carried out on the first batch to be supplied to SEC in securing an order in the independent laboratory in the presence of three (3) SEC engineers & one (1) approved independent inspection agency Inspector.

• Five (5) years warranty from the date of PAC of the turnkey project in case of contract award or date of delivery in case of direct material supply order.

TYCO ELECTRONICS (UK) Ltd - CROMPTON INSTRUMENTS

5Total =

WATTHOURS/VARHOURS TRANSDUCERS31. 6. 4 Applicable Standards:

SLOVENIA-KRANJ Yes ACCEPTANCE SUBJECTED TO SUCCESSFUL PRODUCT EVALUATION / ACCEPTANCE BY SEC CONCERNED END USER DEPARTMENT FOR EACH PURCHASE ORDER / PROJECT DURING TENDER/BIDDING STAGE.

ISKRA MIS

JAPAN YesMITSUBISHI ELECTRIC

United States YesSCIENTIFIC COLUMBUS

3Total =

VOLTAGE TRANSDUCERS31. 6. 5 Applicable Standards:

CANADA-MONTREAL YesABB (ASEA INC.)

United Kingdom YesAREVA

SLOVENIA-KRANJ Yes ACCEPTANCE SUBJECTED TO SUCCESSFUL PRODUCT EVALUATION / ACCEPTANCE BY SEC CONCERNED END USER DEPARTMENT FOR EACH PURCHASE ORDER / PROJECT DURING TENDER/BIDDING STAGE.

ISKRA MIS

United States YesTRANSDATA

4Total =

WATTS/VARS TRANSDUCERS31. 6. 6 Applicable Standards:

CANADA-MONTREAL YesABB (ASEA INC.)

United Kingdom YesAREVA

Page 70 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

SLOVENIA-KRANJ Yes ACCEPTANCE SUBJECTED TO SUCCESSFUL PRODUCT EVALUATION / ACCEPTANCE BY SEC CONCERNED END USER DEPARTMENT FOR EACH PURCHASE ORDER / PROJECT DURING TENDER/BIDDING STAGE.

ISKRA MIS

United States YesTRANSDATA

4Total =

RELAYS731 .

PROTECTIVE RELAYS31. 7. 1 Applicable Standards:

SWEDEN Yes Type of Relay subject to review/approval by the concerned Protection Engineering Division

ABB

FRANCE-/ STAFFORD, ENGLAND YesAREVA FRANCE/ STAFFORD, ENGLAND

United States Yes Type of Relay subject to review/approval by the concerned Protection Engineering Division

ELECTRO-SWITCH

United Kingdom Yes Type of Relay subject to review/approval by the concerned Protection Engineering Division

GE

FRANCE-- Yes For Auxiliary Relays. Type of Relay subject to review/approval by the concerned Protection Engineering Division

MORS SMITT

GERMANY Yes Type of Relay subject to review/approval by the concerned Protection Engineering Division

MR

FRANCE-- Yes Up to 33 kV VOLTAGE LEVEL ONLY; Type of Relay subject to review/approval by the concerned Protection Engineering Division

SCHNEIDER ELECTRIC (Merlin Gerin)

FRANCE-- Yes Type of Relay subject to review/approval by the concerned Protection Engineering Division

SCHNEIDER ELECTRIC (Telemecanique)

United States Yes Type of Relay subject to review/approval by the concerned Protection Engineering Division

SEL

GERMANY Yes Type of Relay subject to review/approval by the concerned Protection Engineering Division

SIEMENS

United Kingdom Yes Type of Relay subject to review/approval by the concerned Protection Engineering Division

VA TECH

11Total =

PROTECTIVE RELAYS FOR MOTORS31. 7. 2 Applicable Standards:

CANADA-ONTARIO Yes Type of Relay subject to review/approval by the concerned Protection Engineering Division

MULTILIN

1Total =

TERMINAL BLOCK831 .

Page 71 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

TERMINAL BLOCK31. 8. 0 Applicable Standards:

FRANCE YesENTRELEC

GERMANY YesPHOENIX

GERMANY YesWEIDMULLER

3Total =

FAULT RECORDERS931 .

FAULT RECORDERS31. 9. 0 Applicable Standards:

United States YesAMETEK (ROCHESTER)

NORTHERN IRELAND YesQUALITROL HATHAWAY

2Total =

DYNAMIC SYSTEM MONITORING EQUIPMENTS1031 .

DYNAMIC SYSTEM MONITORING EQUIPMENTS31. 10. 0 38-TMSS-06Applicable Standards:

GERMANY YesDIgSILENT GmbH

United States YesPOWER TECHNOLOGY INC. (PTI)

2Total =

32 METERS

KILOWATT HOUR METER (ENERGY METER)132 .

KILOWATT HOUR METER (ENERGY METER)32. 1. 0 40-TMSS-02Applicable Standards:

United States Yes PREVIOUSLY ABB (T &D)ELSTER

United Kingdom YesGEC MEASUREMENT

SLOVENIA-KRANJ Yes ACCEPTANCE SUBJECTED TO SUCCESSFUL PRODUCT EVALUATION / ACCEPTANCE BY SEC CONCERNED END USER DEPARTMENT FOR EACH PURCHASE ORDER / PROJECT DURING TENDER/BIDDING STAGE.

ISKRA MIS

GERMANY YesSIEMENS

Page 72 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

United Kingdom-- Yes DIGITAL METERING SYSTEMS TYPE INTEGRA 1530, 1630 & 1540; NOT FOR BULK ENERGY METERS; FIRST BATCH SHALL BE TYPE TESTED IN A INDEPENDENT LAB IN THE PRESENCE OF THREE (3) SEC ENGINEERS & ONE(1) SEC APPROVED IIA INSPECTOR; EXTENDED GUARANTEE FOR FIVE YEARS.

TYCO ELECTRONICS (UK) Ltd - CROMPTON INSTRUMENTS

5Total =

AMMETER, VOLTMETER, MW, MVAR232 .

AMMETER, VOLTMETER, MW, MVAR32. 2. 0 40-TMSS-02Applicable Standards:

FRANCE YesAREVA

ITALY YesCELSA

SPAIN YesCEWE

SLOVENIA-KRANJ Yes ACCEPTANCE SUBJECTED TO SUCCESSFUL PRODUCT EVALUATION / ACCEPTANCE BY SEC CONCERNED END USER DEPARTMENT FOR EACH PURCHASE ORDER / PROJECT DURING TENDER/BIDDING STAGE.

ISKRA MIS

CANADA-- Yes DIGITAL POWER METERS TYPE ION 6200 (0.5% ACCURACY CLASS); 10 YEARS EXTENDED WARRANTY

SCHNEIDER ELECTRIC

United Kingdom-- Yes DIGITAL METERING SYSTEMS TYPE INTEGRA 1530, 1630 & 1540 ; FIRST BATCH SHALL BE TYPE TESTED IN A INDEPENDENT LAB IN THE PRESENCE OF THREE (3) SEC ENGINEERS & ONE(1) SEC APPROVED IIA INSPECTOR; EXTENDED GUARANTEE FOR FIVE YEARS.

TYCO ELECTRONICS (UK) Ltd - CROMPTON INSTRUMENTS

6Total =

AUTOMATIC METER READING (AMR) SYSTEM332 .

AUTOMATIC METER READING (AMR) SYSTEM32. 3 40-TMSS-03Applicable Standards:

Saudi Arabia-Riyadh Yes Based on approval of Executive Directive for TS&SD Letter # 08-1105-03032301 dated 20/10/2008, it is pre-qualified for Energy Meters Type (ADDAD-4) & Quality Meters Type (SEL-734).

ADVANCE ELECTRONICS CO., LTD.

FRANCE-ANNECY-LE-VIEUX Yes Based on TS&SD letter# 09-F00181/03-03032301 dated 06th. April 2009 with (5) years warranty from the date of PAC

ALps Technologies

2Total =

33 CAPACITOR

SHUNT CAPACITOR133 .

Page 73 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

SHUNT CAPACITOR33. 1. 0 43-TMSS-01Applicable Standards:

SWEDEN Yes Based on TS&SD Letter # 10-00269-03032301 dated 24/01/2010, it is pre-qualified for Shunt Capacitor Banks as confirming to SEC specification # 43-TMSS-01, rev.0 with the following conditions:

• All type, special & routine tests as per SEC specifications/standards shall be carried out on the first batch to be supplied to SEC in securing an order in the manufacturer's laboratory in the presence of three (3) SEC engineers & one (1) approved independent inspection agency Inspector.

• Seven (7) years warranty from the date of PAC of the turnkey project in case of contract award or date of delivery in case of direct material supply order.

ABB

FINLAND-Tampere Yes Previously " Nokian Capacitors Ltd. –Finland", the name has been changed to Areva T&D Ltd. –Finland as per TS&SD/ESD Letter # 10-00145-03032301 dated 16/01/2010 and Areva T&D Ltd.-Finland Letter # Nil dated 04/01/2010.

AREVA T&D Ltd.

United States YesCOOPER (MCGRAW-ED)

United States-New York Yes Based on TS&SD fax ref.#08-F0623/01-03032301 dated 02/12/2008.Pre-Qualified for Capacitor Bank (13.8kV through 380kV) with this conditions:-First batch shall be type test in an independent laboratory in presence of (3) SEC engineers & (1) independent inspector.-(10) years warranty

General Electric Energy-CPQP

Page 74 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

CZECH REPUBLIC-BLATNA Yes Based on TS&SD Letter # 10-F01787/03-03032301 dated 18/08/2010, it is pre-qualified for Shunt Capacitor Banks as confirming to SEC specification # 43-TMSS-01, Rev.0 with the following conditions:

• All type/design, special & routine tests for the first batch of proposed Power Capacitors up to 380kV, manufactured in Vishay, Blatna Czech Republic to be supplied to SEC shall be conducted in an independent testing laboratory in the presence of three (3) SEC engineers & one (1) SEC approved independent inspection agency Inspector, the relevant cost of which shall be borne by manufacturer. This was confirmed by the manufacturer as per submitted confirmation letter dated 28/05/2010G.

• Ten (10) years extended warranty from the date of PAC of the turnkey project in case of contract award or date of delivery in case of direct material supply order. This was confirmed by the manufacturer as per submitted guaranty/warranty certificated dated 28/05/2010G.

VISHAY ELECTRONICS

5Total =

34 ELECTRONIC COMPONENTS

MODULAR PHOTOVOLTAIC POWER SUPPLY SYSTEMS134 .

MODULAR PHOTOVOLTAIC POWER SUPPLY SYSTEMS34. 1. 0 Applicable Standards:

FINLAND YesNEST OY/NAPS

1Total =

35 INSTRUMENT TRANFORMERS

33 & 34.5 KV CTS135 .

33 & 34.5 KV CTS35. 1. 0 50-TMSS-01Applicable Standards:

United States-N/A YesABB ( T& D)

CZECH REPUBLIC YesABB EJF

United States YesGE

Croatia/Hrvatska-- Yes All Type, Special, Routine tests per SEC Standards and IEC to be performed at KONCAR-Electrical Institute Inc. as independent and accredited testing laboratory. Extended guarantee/warrenty for 10 years.

KONCAR INSTRUMENT TRANSFORMERS INC.

Page 75 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

United States Yes RING/SPLIT CORE TYPEKUHLMAN ELECTRIC CORPORATION

GERMANY Yes RING TYPEKWK MESWANDLER

Saudi Arabia-RIYADH Yes TS&SD letter# 09-00918-03032301 dated 29 March 2009 it is prequalified for CT up to 36kV with the following conditions: TYPE TEST SHALL BE DONE AT AN INTL. TESTING LAB IN PRESENCE OF 3RD PARTY INSPECTOR; EXTENDED GUARANTEE/ WARRANTY FOR 10 YEARS FROM PAC.

MEMF

SWITZERLAND Yes RING/SPLIT CORE TYPEPFIFFNER

FRANCE Yes RING/SPLIT CORE TYPE & BLOCK TYPE CTs UP TO 36kV.SADTEM

United States Yes .SIEMENS

ITALY Yes RING/SPLIT CORE TYPESTE

11Total =

69KV CTS235 .

69KV CTS35. 2. 0 50-TMSS-01Applicable Standards:

SWEDEN YesABB

United States-N/A YesABB ( T& D)

BELGIUM YesALSTOM (T & D) BALTEAU SA (NV)

United Kingdom YesAREVA

SWITZERLAND YesE. PFIFFNER

United States YesGE

SWITZERLAND YesHAEFELY-TRENCH ELECTRIC

FRANCE YesHAEFELY-TRENCH ELECTRIC

Croatia/Hrvatska-- Yes All Type, Special, Routine tests per SEC Standards and IEC to be performed at KONCAR-Electrical Institute Inc. as independent and accredited testing laboratory. Extended guarantee/warrenty for 10 years.

KONCAR INSTRUMENT TRANSFORMERS INC.

United States Yes RING/SPLIT CORE TYPEKUHLMAN ELECTRIC CORPORATION

GERMANY Yes RING TYPEKWK MESWANDLER

JAPAN Yes .NISSIN

SWITZERLAND Yes RING/SPLIT CORE TYPEPFIFFNER

United States Yes Type test required in first supply;10 Years Warranty from the date of PAC is required.

RITZ

FRANCE Yes RING/SPLIT CORE TYPESADTEM

Page 76 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

United States Yes .SIEMENS

ITALY Yes RING/SPLIT CORE TYPESTE

ITALY-N/A Yes PREVIOUSLY AS VA TECH (NOUVA MAGRINI GALILEO); OIL TYPE

TRENCH ITALIA

18Total =

110 - 132 KV CTS335 .

110 - 132 KV CTS35. 3. 0 50-TMSS-01Applicable Standards:

SWEDEN YesABB

United States-N/A YesABB ( T& D)

BELGIUM YesALSTOM (T & D) BALTEAU SA (NV)

United Kingdom YesAREVA

SWITZERLAND YesHAEFELY-TRENCH ELECTRIC

FRANCE YesHAEFELY-TRENCH ELECTRIC

Croatia/Hrvatska-- Yes All Type, Special, Routine tests per SEC Standards and IEC to be performed at KONCAR-Electrical Institute Inc. as independent and accredited testing laboratory. Extended guarantee/warrenty for 10 years.

KONCAR INSTRUMENT TRANSFORMERS INC.

United States Yes RING/SPLIT CORE TYPEKUHLMAN ELECTRIC CORPORATION

GERMANY Yes RING TYPEKWK MESWANDLER

JAPAN Yes .NISSIN

SWITZERLAND Yes RING/SPLIT CORE TYPEPFIFFNER

United States Yes Type test required in first supply;10 Years Warranty from the date of PAC is required.

RITZ

FRANCE Yes RING/SPLIT CORE TYPESADTEM

ITALY Yes RING/SPLIT CORE TYPESTE

ITALY-N/A Yes PREVIOUSLY AS VA TECH (NOUVA MAGRINI GALILEO); OIL TYPE

TRENCH ITALIA

15Total =

230KV CTS435 .

230KV CTS35. 4. 0 50-TMSS-01Applicable Standards:

SWEDEN YesABB

Page 77 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

United States-N/A YesABB ( T& D)

BELGIUM YesALSTOM (T & D) BALTEAU SA (NV)

United Kingdom YesAREVA

SWITZERLAND YesHAEFELY-TRENCH ELECTRIC

FRANCE YesHAEFELY-TRENCH ELECTRIC

United States Yes RING/SPLIT CORE TYPEKUHLMAN ELECTRIC CORPORATION

GERMANY Yes RING TYPEKWK MESWANDLER

JAPAN Yes .NISSIN

SWITZERLAND Yes RING/SPLIT CORE TYPEPFIFFNER

United States Yes Type test required in first supply;10 Years Warranty from the date of PAC is required.

RITZ

FRANCE Yes RING/SPLIT CORE TYPESADTEM

ITALY Yes RING/SPLIT CORE TYPESTE

ITALY-N/A Yes PREVIOUSLY AS VA TECH (NOUVA MAGRINI GALILEO); OIL TYPE

TRENCH ITALIA

14Total =

380KV CTS535 .

380KV CTS35. 5. 0 50-TMSS-01Applicable Standards:

SWEDEN YesABB

United States-N/A YesABB ( T& D)

BELGIUM YesALSTOM (T & D) BALTEAU SA (NV)

United Kingdom YesAREVA

FRANCE YesHAEFELY-TRENCH ELECTRIC

SWITZERLAND YesHAEFELY-TRENCH ELECTRIC

United States Yes RING/SPLIT CORE TYPEKUHLMAN ELECTRIC CORPORATION

GERMANY Yes RING TYPEKWK MESWANDLER

JAPAN Yes .NISSIN

Page 78 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

SWITZERLAND Yes Based on TS&SD letter# 09-01105-03032301 dated 24th June 2009, it is pre-qualified for CT & CVT rated up to 380kV as confirming to SEC specification # 50-TMSS-03, rev.0 & # 50-TMSS-02, rev.0 respectively with the following conditions:• All type, routine & special tests including the load test shall be carried out on the first batch to be supplied to SEC in securing an order in an independent testing laboratory in the presence of three (3) SEC engineers & one (1) approved independent inspection agency Inspector. • Ten (10) years warranty from the date of PAC of the turnkey project in case of contract award or date of delivery in case of direct material supply order.

PFIFFNER

United States Yes Type test required in first supply;10 Years Warranty from the date of PAC is required.

RITZ

FRANCE Yes RING/SPLIT CORE TYPESADTEM

ITALY Yes RING/SPLIT CORE TYPESTE

ITALY-N/A Yes PREVIOUSLY AS VA TECH (NOUVA MAGRINI GALILEO); OIL TYPE

TRENCH ITALIA

14Total =

36 POTENTIAL TRANSFORMER

33 & 34.5 KV POTENTIAL TRANSFORMERS136 .

33 & 34.5 KV POTENTIAL TRANSFORMERS36. 1. 0 50-TMSS-03Applicable Standards:

United States-N/A YesABB ( T& D)

CZECH REPUBLIC YesABB EJF

BELGIUM YesALSTOM (T & D) BALTEAU SA (NV)

United Kingdom YesAREVA

SWITZERLAND YesE. PFIFFNER

United States YesGE

FRANCE YesHAEFELY-TRENCH ELECTRIC

SWITZERLAND YesHAEFELY-TRENCH ELECTRIC

Croatia/Hrvatska-- Yes All Type, Special, Routine tests per SEC Standards and IEC to be performed at KONCAR-Electrical Institute Inc. as independent and accredited testing laboratory. Extended guarantee/warrenty for 10 years.

KONCAR INSTRUMENT TRANSFORMERS INC.

JAPAN YesNISSIN

FRANCE Yes BLOCK TYPE PTs UP TO 36kV.SADTEM

Page 79 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

GERMANY YesSIEMENS

12Total =

69 KV POTENTIAL TRANSFORMERS236 .

69 KV POTENTIAL TRANSFORMERS36. 2. 0 50-TMSS-03Applicable Standards:

SWEDEN YesABB

United States-N/A YesABB ( T& D)

BELGIUM YesALSTOM (T & D) BALTEAU SA (NV)

United Kingdom YesAREVA

SWITZERLAND YesE. PFIFFNER

SWITZERLAND YesHAEFELY-TRENCH ELECTRIC

FRANCE YesHAEFELY-TRENCH ELECTRIC

Croatia/Hrvatska-- Yes All Type, Special, Routine tests per SEC Standards and IEC to be performed at KONCAR-Electrical Institute Inc. as independent and accredited testing laboratory. Extended guarantee/warrenty for 10 years.

KONCAR INSTRUMENT TRANSFORMERS INC.

JAPAN YesNISSIN

United States Yes Type test required in first supply;10 Years Warranty from the date of PAC is required.

RITZ

10Total =

110 - 132 KV POTENTIAL TRANSFORMERS336 .

110 - 132 KV POTENTIAL TRANSFORMERS36. 3. 0 50-TMSS-02,50-TMSS-03Applicable Standards:

SWEDEN YesABB

United States-N/A YesABB ( T& D)

BELGIUM YesALSTOM (T & D) BALTEAU SA (NV)

United Kingdom YesAREVA

SWITZERLAND YesHAEFELY-TRENCH ELECTRIC

FRANCE YesHAEFELY-TRENCH ELECTRIC

Croatia/Hrvatska-- Yes All Type, Special, Routine tests per SEC Standards and IEC to be performed at KONCAR-Electrical Institute Inc. as independent and accredited testing laboratory. Extended guarantee/warrenty for 10 years.

KONCAR INSTRUMENT TRANSFORMERS INC.

Page 80 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

JAPAN YesNISSIN

United States Yes Type test required in first supply;10 Years Warranty from the date of PAC is required.

RITZ

9Total =

230 KV POTENTIAL TRANSFORMERS436 .

230 KV POTENTIAL TRANSFORMERS36. 4. 0 50-TMSS-02,50-TMSS-03Applicable Standards:

SWEDEN YesABB

United States-N/A YesABB ( T& D)

BELGIUM YesALSTOM (T & D) BALTEAU SA (NV)

United Kingdom YesAREVA

SWITZERLAND YesHAEFELY-TRENCH ELECTRIC

FRANCE YesHAEFELY-TRENCH ELECTRIC

GERMANY YesMESWANDLER

JAPAN YesNISSIN

United States Yes Type test required in first supply;10 Years Warranty from the date of PAC is required.

RITZ

9Total =

380 KV POTENTIAL TRANSFORMERS536 .

380 KV POTENTIAL TRANSFORMERS36. 5. 0 50-TMSS-02,50-TMSS-03Applicable Standards:

SWEDEN YesABB

United States-N/A YesABB ( T& D)

BELGIUM YesALSTOM (T & D) BALTEAU SA (NV)

United Kingdom YesAREVA

SWITZERLAND YesHAEFELY-TRENCH ELECTRIC

FRANCE YesHAEFELY-TRENCH ELECTRIC

JAPAN YesNISSIN

United States Yes Type test required in first supply;10 Years Warranty from the date of PAC is required.

RITZ

8Total =

Page 81 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

37 INSULATING OIL

MINERAL OIL FOR ELECTRICAL APPARATUS137 .

MINERAL OIL FOR ELECTRICAL APPARATUS37. 1. 1 54-TMSS-01Applicable Standards:

--- Yes CT, PT, POWER TRANSFORMER MANUFACTURERS CAN PROCURE OIL MEETING ALL THE REQUIREMENTS OF APPLICABLE STANDARD FROM ANY REPUTED OIL MANUFACTURERS.

*

INDIA-RABLE-NEW MUMBAI Yes Based on TS&SD letter # 11-00152-1-03032301 dated 22/01/2011, it is pre-qualified for Uninhibited Naphthenic Mineral Insulating Oil type POWEROIL TO 1020 (60U) as conforming to SEC specification # 54-TMSS-01, Rev.01 with the following condition:• Five (5) years extended warranty from the date of PAC of the turnkey project in case of contract award or date of delivery in case of direct material supply order.

APAR INDUSTRIES LTD

Saudi Arabia-YANBU YesCHEMTRADE/MOBIL OIL CO. LTD.

SWEDEN YesNYNAS

Saudi Arabia-Jeddah Yes Previously "PETROLUBE", the name has been change to PETROMIN CORPORATION (Petrolube) - Saudi Arabia based on PETROMIN CORPORATION letter # Nil dated 30/06/2010.

PETROMIN CORPORATION (Petrolube)

INDIA YesSAVITA

FRANCE YesSHELL

7Total =

INSULATING OIL FOR LOW PRESSURE OIL FILLED (LPOF) CABLES237 .

INSULATING OIL FOR LOW PRESSURE OIL FILLED (LPOF) CABLES37. 2. 0 Applicable Standards:

United States YesATOFINA CHEMICALS

United States YesDIELECTRIC SYSTEM INC.

JAPAN-FUJIKURA YesFURAKAWA CABLES

FRANCE-LAVERA YesINDOPOL

GERMANY YesSIEMENS

5Total =

38 MOBILE SUBSTATION

Page 82 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

MOBILE S/S, 110 - 132 /13.8KV138 .

MOBILE S/S, 110 - 132 /13.8KV38. 1. 0 Applicable Standards:

SWEDEN YesABB

ITALY YesABB/ADDA

GERMANY YesSIEMENS

3Total =

39 TELECOMMUNICATION EQUIPMENT

FIBER OPTIC COMMUNICATION TERMINAL EQPT.139 .

FIBER OPTIC COMMUNICATION TERMINAL EQPT.39. 1. 0 48-TMSS-06Applicable Standards:

SWEDEN YesABB

SWITZERLAND Yes Based on TADD letter# 09-0576-030225, SCADA letter# SOCW/DIV/97 and Telecomunication Dep. letter# 09-136-03040001.

ABB

FRANCE YesALCATEL

United States YesAT & T (LUCENT TECHNOLOGIES)

JAPAN YesFUJITSU

CANADA-Ontario Yes Based on TADD letter# 09-0297-030225 dated 28th March 2009; (Note: GE Industrial System, Canada has bought only the Lentronics business from Nortel, Canada that manufactures TN1U SHD Fiber Optic Terminal Equipment and MUX)

GE Industrial System

Page 83 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

CHINA-Shenzhen Yes Based on TS&SD Letter # 10-F01736/02-03032301 dated 18/08/2010, it is pre-qualified for Communication Transmission Equipment (OSN Series:1500,2500,3500,7500,9500 and iManager T2000NMS) with the following conditions:

• All type/design, special & routine tests (for the first batch of proposed Communication Transmission Equipment (OSN Series and NMS) to be supplied to SEC shall be conducted in an independent testing laboratory in the presence of three (3) SEC engineers & one (1) SEC approved independent inspection agency Inspector, the relevant cost of which shall be borne by manufacturer. This was confirmed by the manufacturer as per Huawei letter # 70917174/MRK/SEC dated 26/04/2010G.

• Ten (10) years extended warranty for the proposed Communication Transmission Equipment (OSN Series and NMS) from the date of PAC of the turnkey project in case of contract award or date of delivery in case of direct material supply order. This was confirmed by the manufacturer as per Huawei letter # 70917174/MRK/SEC dated19/02/2008G.

HUAWEI TECHNOLOGIES CO.LTD.

JAPAN-TOKYO YesNIPPON ELECTRIC CO. LTD.

FINLAND YesNOKIA

CANADA YesNORTEL

HOLLAND YesPHILIPS

GERMANY YesSIEMENS

FRANCE YesTELETTRA

13Total =

FIBER OPTIC LOW DENSITY EQPT.239 .

FIBER OPTIC LOW DENSITY EQPT.39. 2. 0 Applicable Standards:

FRANCE-TURGI YesABB INFOCOM LTD.

United States YesLICOM

CANADA YesPRISM

GERMANY YesSIEMENS

4Total =

POWER LINE CARRIER EQPT.339 .

Page 84 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

POWER LINE CARRIER EQPT.39. 3. 0 Applicable Standards:

SWEDEN YesABB

FRANCE-TURGI YesABB INFOCOM LTD.

FRANCE YesAREVA

United States-LYNCHBURG, YesGENERAL ELECTRIC CO.

NORWAY YesNERA

GERMANY YesSIEMENS

6Total =

TELE PROTECTION SYSTEM (TPS)439 .

TELE PROTECTION SYSTEM (TPS)39. 4. 0 Applicable Standards:

SWEDEN YesABB

FRANCE YesAREVA

SPAIN-Barcelona Yes Based on TS&SD Letters# 09-01439-2-03032301 dated 7th July 2009 & 10-00845-1-03032301 dated April 04, 2010. It is pre- qualified for Tele-protection Equipment type TPU-1 with the following conditions:• Five (5) years Extended Warranty.

DIMAT

GERMANY YesSIEMENS

4Total =

CABLE ISOLATION EQPT.539 .

CABLE ISOLATION EQPT.39. 5. 0 Applicable Standards:

CANADA-MONTREAL YesPOSITRON INDUSTRIES

1Total =

PABX”S TELEPHONE SETS, COMMUNICATION CABLES AND ACCESSORIES639 .

CABLING ACCESSORIES39. 6. 1 Applicable Standards:

United States-CA YesRAYCHEM

1Total =

Page 85 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

PABX”S TELEPHONE SETS, COMMUNICATION CABLES AND ACCESSORIES39. 6. 2 Applicable Standards:

FRANCE-PARIS YesALCATEL NV

United States-NEW YORK YesAT & T

CANADA YesNORTHERN TELECOM

HOLLAND YesPHILIPS

GERMANY YesSIEMENS

5Total =

PABX”S TELEPHONE SETS, KEY SYSTEMS39. 6. 3 Applicable Standards:

CANADA YesMITEL CORP.

1Total =

TELEPHONE EQUIPMENT PABX”S AND ACCESSORIES39. 6. 4 Applicable Standards:

SWEDEN YesERICSON

1Total =

VF INTERFACE EQPT.739 .

VF INTERFACE EQPT.39. 7. 0 Applicable Standards:

SWITZERLAND-TURGI YesABB INFOCOM LTD.

United States-N/A YesTELLABS INC.

2Total =

DC POWER SYSTEMS839 .

DC POWER SYSTEMS39. 8. 0 Applicable Standards:

United States-PA YesEXIDE CORP.

United Kingdom-ESSEX YesHARMER & SIMMONS

United States-LOARIN YesLORAIN PRODUCTS INTERNATIONAL SALES

FRANCE Yes Previously SAFT-NIFESAFT POWER SYSTEMS SAS

4Total =

Page 86 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

TEST EQUIPMENT939 .

TEST EQUIPMENT39. 9. 0 Applicable Standards:

United States YesACTERNA

JAPAN-TOKYO YesANDO ELECTRIC CO. LTD

United States YesHEWLETT PACKARD CO.

United States-N/A YesIFR

United Kingdom-CAMBRIDGE YesPHILIPS

GERMANY-N/A YesROHDE & SCHWARZ

SPAIN YesTREND

WEST GERMANY YesWANDEL & GOLTERMAN GMBH CO.

8Total =

TEST EQUIPMENT (FIBER OPTIC RELATED)1039 .

TEST EQUIPMENT (FIBER OPTIC RELATED)39. 10. 0 Applicable Standards:

JAPAN-TOKYO YesANRITSU CORPORATION

1Total =

TEST EQUIPMENT (RADIO RELATED)1139 .

TEST EQUIPMENT (RADIO RELATED)39. 11. 0 Applicable Standards:

United States-SOLON YesBIRD

United Kingdom-N/A YesMARCONI

2Total =

TEST EQUIPMENT (RADIO/PAGING RELATED)1239 .

TEST EQUIPMENT (RADIO/PAGING RELATED)39. 12. 0 Applicable Standards:

United States YesNEC

1Total =

Page 87 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

RADIO/PAGING EQUIPMENT (MOBILE FIXED)1339 .

RADIO/PAGING EQUIPMENT (MOBILE FIXED)39. 13. 0 Applicable Standards:

Saudi Arabia-AL-KHOBAR YesELECTRONIA

United States-N/A YesGE/ERICSON

CANADA- BC YesGLENAYRE

United States-CALIFORNIA YesKENWOOD

United States-SCHAMBURG IL YesMOTOROLA

United States YesNEC

FINLAND YesNOKIA

United Kingdom-CAMBRIDGE YesPHILIPS

8Total =

RADIO/PAGING EQUIPMENT (ACCESSORIES)1439 .

RADIO/PAGING EQUIPMENT (ACCESSORIES)39. 14. 0 Applicable Standards:

United States-DALLAS TEXAS YesALLEN

United States- IL YesANDREW

United States- DALLAS TEXAS YesANTENNA SPECIALIST (AS)

United States YesCELWAVE

United States-DALLAS TEXAS YesDECIBEL

United States-N/A YesFLEXWELL

United Kingdom- NORTHAMPTON YesJAYBEAM

United Kingdom-NORTHANTS YesRADIO SPARES (RS)

8Total =

UHF RADIO1539 .

UHF RADIO39. 15. 0 Applicable Standards:

FRANCE YesALCATEL

United Kingdom YesASCOM

United Kingdom YesSIMOCO

Page 88 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

3Total =

HIGH DIGITAL SUBSCRIBER LINE (HDSL)1639 .

HIGH DIGITAL SUBSCRIBER LINE (HDSL)39. 16. 0 Applicable Standards:

SWEDEN YesABB

FINLAND Yes .NOKIA

CANADA Yes .NORTEL

3Total =

PAX (TELEPHONE EXCHANGE)1739 .

PAX (TELEPHONE EXCHANGE)39. 17. 0 Applicable Standards:

FRANCE YesALCATEL

CANADA YesNORTEL

GERMANY YesSIEMENS

3Total =

40 FIRE PROTECTION SYSTEM

FM 200 SYSTEM140 .

GAS CYLINDERS & ACCCESSORIES40. 1. 1 Applicable Standards:

United States YesDUEPOINT

United States YesGREAT LAKES

2Total =

EQUIPMENT40. 1. 2 Applicable Standards:

Yes Based on TS&SD Letter # 10-2425/02-03032301 dated 31/08/2010, it is pre-qualified for HFC227ea system (FM 200) as confirming to SEC specification # TES-B-106.05.

United States Yes LOCAL AGENT AL-BILADANSUL

United States Yes LOCAL AGENT HEBACHEMETRON

United States Yes LOCAL AGENT ENERGY HOUSEFENWAL

Page 89 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

United States YesFIGGIE

United States YesFIKE

United States YesFIREATER

United States YesHYGOOD

United States YesKIDDE

United States-Buffalo Grove Yes Based on TS&SD Letter # 10-2425/02-03032301 dated 31/08/2010, it is pre-qualified for HFC227ea system (FM 200) as confirming to SEC specification # TES-B-106.05, Rev.0

Siemens Building Technologies

10Total =

WATER SPRAY SYSTEM240 .

DELUGE VALVE, SPRAY NOZZLE, ALARM VALVE AND SPRINKLERS40. 2. 1 Applicable Standards:

United States YesGRINNEL

United States Yes LOCAL AGENT AL-BILADRELIABLE

United States YesSPRAYSAFE

United States Yes LOCAL AGENT AL-BILADVIKING

United States YesWATTS

5Total =

CARBON DIOXIDE (CO2) SYSTEM340 .

GAS CYLINDERS & ACCCESSORIES40. 3. 1 Applicable Standards:

United States Yes LOCAL AGENT HEBACARDOX

United States Yes LOCAL AGENT HEBACHEMETRON

United States Yes ...FIKE

United States YesHYGOOD

United States Yes LOCAL AGENT ENERGY HOUSEKIDDE

5Total =

FIRE FIGHTING WATER PUMPS440 .

FIRE WATER PUMPS & ACCESSORIES40. 4. 1 Applicable Standards:

Page 90 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

United States Yes LOCAL AGENT –SAUDI PUMP >= 500 GPMAURORA

United States Yes LOCAL AGENT –SAUDI PUMP >=500GPMFAIRBANK MORSE

United States YesFLOWAY

United States YesITT

United States Yes LOCAL AGENT –SAUDI PUMP >=500GPMPEERLESS

United States YesPETTERSON

United States YesREDDY BUFFALOU

United States Yes LOCAL AGENT –SAUDI PUMP >=500GPMWORTHINGTON

8Total =

FOAM SYSTEM540 .

FOAM SYSTEM & ACCESSORIES40. 5. 1 Applicable Standards:

United Kingdom YesANGUS

United States Yes LOCAL AGENT NAFISCOCHEMGUARD

United States Yes LOCAL AGENT HEBANATIONAL FOAM

3Total =

FIRE EXTINGUISHER640 .

PORTABLE / MOBILE40. 6. 1 Applicable Standards:

Saudi Arabia YesHEBA

Saudi Arabia YesSFFECO

2Total =

PORTABLE FIRE EXTINGUISHER, CO2 TYPE40. 6. 2 Applicable Standards:

United States Yes LOCAL AGENT AL-BILAD >=5 LBSANSUL

United States Yes >=5 LBSKIDDE

United States Yes LOCAL AGENT AL-BILAD >=5 LBSSENTRY

3Total =

PORTABLE FIRE EXTINGUISHER, DRY CHEMICAL TYPE40. 6. 3 Applicable Standards:

Page 91 of 92

SERMETERIAL / EQUIPMENT

DESCRIPTION MANUFACTURER FACTORY LOCATIONPre-Qualified

Manufacturers By SEC

REMARKS

United States Yes LOCAL AGENT AL-BILAD >=2 LBSANSUL

United States Yes LOCAL AGENT AL-BILAD >=2 LBSSENTRY

2Total =

PORTABLE FIRE EXTINGUISHER, WATER TYPE40. 6. 4 Applicable Standards:

United States Yes LOCAL AGENT AL-BILAD >=2.5 LBSSENTRY

1Total =

FIRE DETECTION AND ALARM SYSTEM740 .

EQUIPMENT & ACCESSORIES40. 7. 1 Applicable Standards:

United States YesAUTOCALL (GRINNEL)

CANADA Yes LOCAL AGENT AL-BILADEDWARDS

United States YesMIRETONE

United States Yes LOCAL AGENT -NAFISCONOTIFIRE

United States-New Jersey Yes Originaly was PYROTRONICS from USA.Local Agents are: Siemens Building Technologies (SBT) & SASEEQ

Siemens Building Technologies – Fire Safety

United States Yes LOCAL AGENT –NAFISCOSIMPLEX

United Kingdom YesTHORN

7Total =

Page 92 of 92