matically between salt fog, high hu- midity, low humidity with dry off, and ambient conditions in any combination for various lengths of time. CCT Chambers feature translucent covers on all four sides; temperature and humidity display; built-in solution res- ervoir; computer interface RS232/422; automated fill on bubble tower; and support bars and racks.

Circle 428 on reader information card

Bright Acid Copper Process MacDermid Inc. Waterbury, Corm.

MacDermid introduces a new bright acid copper process for plating metal or plastic substrates. Isobrite 660 is an ultrahigh performance, dye-free addi- tion agent that offers unparalleled leveling. The deposits are ductile, low-stressed, and readily accept subse- quent coatings. The Isobrite 660 proc- ess provides excellent throwing power, and brightness and leveling are excel-

lent across all normal current density ranges.

Circle 429 on reader information card

Liquid Buffing Compound Stan Sax Corp. Detroit

Stan Sax Corp. has developed a new liquid buffing compound for all non- ferrous metals. PT-454 provides cut and color for aluminum, brass, and zinc. PT-454 leaves an even, bright finish and cleans very easily. PT-454 is also very environmentally friendly.

Circle 430 on reader information card

Electrostatic Powder Bell Binks Mfg. Co. Franklin Park, 111.

Binks Mfg. Co. introduces their EPB-2000 Electrostatic Powder Bell, which electrostatically charges powder via a flat-shaped rotating bell head. Because of its high powder delivery capability, the EPB-2000 is able to work at high line speeds. Additional

All Plastic

??All CPVUAII kynar / All polypropylene Construction. ??Vertical Immersion designs range from ‘18 hp to

7.5 hp - Flow rates from 5 to 360 Gpm at pressures up to 110 feet.

??Special Duty/voltage motors available. ??Horizontal design equipped with internal all

non-metallic bellows-type seal double, mechanical water cooled seals or magnetic drive.

18 Commerce Road, Fairfield, N.J. 07006 (201) 5751531 FAX No. (201) 575-9512

features of the EPB-2000 include a large-diameter spray pattern in excess of 24 in.; high first-pass transfer effi- ciency up to 85%; and coating thick- ness consistency of HO%. These at- tributes allow the electrostatic powder bell to replace up to three standard or tribo applicators. Able to apply a broad spectrum of organic powders including primers and clear coats, the EPB-2000 is ideal for coating wide, flat surfaces as well as tubular and wire parts.

circle 431 on reader information card

Constant operating temperature to 450’ F - GoodStafl

It’s the LFP 2100 Series liner fabricated of Perfluoroplastic Resins. Great for electroless NI, them milling of titanium, zero contami- nant containment and much more. Custom fabricated for your tank.

F.C. Witt Associates Ltd. also fabricates lin- ers of flexible PVC and PU.

Circle 069 on reader information card Circle 026 on reader information card

98 METAL FINISHING . FEBRUARY 1995