Upload
doanthien
View
220
Download
3
Embed Size (px)
Citation preview
Liquid and Bulk Solids Level
T H E G L O B A L L E A D E R I N L E V E L D E T E C T I O N
K-TEK Corp. K-TEK Instruments (Pty) Ltd.
K-TEK Level Eng. Pvt. Ltd.
K-TEK (Tianjin) Level Co., Ltd.
K-TEK BV K-TEK Solids Level
MAGNETIC LEVEL GAUGES & ACCESSORIES
AccuTrak AT200 Compact
Magnetostrictive Level Transmitter
Magnetic Liquid Level GaugeBenefits:n Low cost of ownershipn Safe and simple installationn 5 year warrantyn High visibilityConfigurations:n High pressure (4500 psi)n High temperature (1000˚F) n Extruded outletsn Engineered floats
(>0.25 SG)
AT200 Magnetostrictive Level Transmitter
shown with KM26S
MW05 Dual Chamber Level System n Redundant level measurement
- Guided Wave Radar (GWR) - Magnetostrictive n Low cost of ownershipn 5 year warranty n Highly visible indication
Electric Switch n Hazardous area rating: FM approved
and CSA Certifiedn Enclosure: stainless steel/explosion
proof, NEMA 4x/Ip56, ¾” FNPTn Switching mechanism: cam driven,
snap-action; AC:10 amp DC: ½ amp; min process temp -60°F (-51°C) and max process temp 300°F (149°C), 600°F (316°C) with IP option; 13/16” deadband, DPDT
n For high-temperature, vibration and high-corrosive applications
Electric Switch n Hazardous area rating: FM approved and CSA
Certifiedn Enclosure: hermetically sealed/explosion proof,
NEMA 4x/IP56, ½” FNPTn Switching mechanism: reed, AC/DC 1 amp, max
process temp 600°F (316°C) with IP option, 1/8” deadband, SPDT
Electric Switch(Dual Compartment Housing) n Hazardous area rating: FM approved; CSA and ATEX Certifiedn Enclosure: stainless steel, dual compartment, hermetically sealed,
explosion proof; NEMA 4x/IP56; ½” FNPTn Switching mechanism: cam driven, snap-action; AC: 10 amp DC:
2.6 amp; min process temp -320°F (-195°C) with option and max process temp 300°F (149°C), 1000°F (538°C) with IP option; 15/16”, DPDT
n For high-temperature, vibration and high-corrosive applications
*SIL2 certification valid only at Prairieville manufacturing facility.
World’s FIRST *SIL2 CertifiedMagnetostrictive Level Transmitter
Magnetostrictive Level Transmitter n Designed to mount externally
to K-TEK’s KM26 or other magnetic level gauges
n High accuracy: .01% of full scalen Superior piezo ceramic sensor
(patent #5,473,245)n Never requires recalibration:
set it and forget it
MAGNETOSTRICTIVE LEVEL TRANSMITTERS
Compact Magnetostrictive Liquid Level Transmitter for Non-Contact n Designed to mount externally to K-TEK
KM26 or other magnetic level gaugesn High resolution 4-20 mA outputn Suitable for high temperature
applications n Calibrates without opening enclosure
AccuTrak AT600 Compact Magnetostrictive Level
Transmitter
AT200 Magnetostrictive Level Transmitter
shown with KM26S
Compact Magnetostrictive Liquid Level Transmitter for Direct Insertionn High accuracy - .02%n Loop powered to 16ft (5m)
probe lengthn High resolution 4-20 mA outputn High accuracy - .02%
Magnetic Level Gauge
Magnetostrictive Liquid Level Transmitter n Dual compartment housing with separate field terminal
compartmentn Pressure to 3000 psi (207 bar), Std. 1800 psi (124.1 bar)n Temperature range: -320˚F to 800˚F (-196˚C to 427˚C) with optionsn HART protocol or Honeywell DE communications available
World’s FIRST *SIL2 CertifiedMagnetostrictive Level Transmitter
*SIL2 certification valid only at Prairieville manufacturing facility.
External chamber used for side
tank mounting
Centering disc
Dual compartment
Modular electronics
Glass window cover
State-of-the-Art Loop Powered, 4-20mA Output GWR Level Transmitter for Level and Interface Applications n SIL2 Suitablen The MT5100 provides both lower and upper
level fluid indicationsn Flooded or non-flooded chambersn Transmission of interface and upper fluid
Signals with the use of the optional RI100 repeat indicator transmitter
n Detection of the presence of a rag layer (patent pending)
State-of-the-Art Loop Powered, 4-20mA Output GWR Transmitter for Liquid Level Applications n SIL2 Suitablen Reliable level measurement over
varied process conditionsn Distance 2 to 100 ft. (30 m)n Temperatures to 800˚F (427˚C)n Pressures to 5000 psi (344 bar)
GUIDED WAVE RADAR TRANSMITTERS
WaveForm display allows engineer/technician to view measurements in real-time
Coaxial probe with slotted groove design provides
maximum signal strength without the use of an
external chamber
High temperature extension
Explosion Proof, Smart Laser Level Transmitter n Long range - 240 ft (75 m)n Measure any surface at any angle with narrow beamn Explosion-proof dual compartment enclosuren HART protocoln Built-in aiming laser
The SureShot™ 140XP comes with an on-board graphic display
High Performance, Long Ranges Laser Level and Position Transmittern Long range up to 200 ft / 60 m (level applications) and
up to 1312 ft / 400 m (positioning applications)n Measures any surface at any angle with narrow beamn Rugged and robust enclosuren Accepts 110/220 VAC and +24VDC input voltagesn Built-in aiming laser
Versatile, Intermediate Range Laser Level and Positioning Transmitter n Long range to 500 ft. / 150 m (positioning applications)
and up to 100 ft. / 30 m (level applications)n Measures any surface at any angle with narrow beamn Easy installation and intuitive setupn Aiming laser optional
Two Dimensional Laser Scanner for Non-Contact Volumetric Measurement of Belt Conveyed Materials n Non-contact belt scalen Simple installation during conveyor operationn Non-contact conveyor volume and
speed measurementn No routine maintenance
or calibration
Three Dimensional Laser Scanner for Non-Contact Volumetric Measurement of Bulk Materials in Silos and Stock Piles n 3D Laser surface profilingn Integral laser pointer for alignmentn 100ft X 100ft (30m X 30m) scanning arean Volume & level measurement of any complex
shapen Inventory measured in less than 5 min
LASER TRANSMITTERS
LM80 with 4” Tri-Clover Quick disconnect –
food processing and beverage industry
LM80 with 4” Tri-Clover and Heated Optic – food processing/beverage and
pharmaceutical industryLM80 with Heated Optic
– water treatment and chemical industry
Hand-held programmer plugs into LM™80 and LM™200
laser transmitters
Dust tubes are available in stainless steel or aluminum for dust protection and long-term reliability
KSONIK™ I Short Range Ultrasonic Level Transmittern Range to 50 ft. / 15 mn Graphic LCD displayn Integrated KSCOPE softwaren Automatic variable GAP for difficult applicationsn Open channel flown Trend recorder
KSONIK™ III Long Range Ultrasonic Level Transmittern Long range up to 195 ft. / 60 m n Graphic LCD displayn Single or dual channel configuration n Integrated KSCOPE softwaren Automatic variable GAP for difficult applicationsn Trend recorder
Model | K10T3
Model | K20H
Model | K60
Model | K20Model | K10
Model | K10F
Ultrasonic Transducer Series
ULTRASONIC TRANSMITTERS & SWITCHES
KSONIK™ MICRO Loop Powered Ultrasonic Level Transmitter n Up to 16 ft. / 5 m measuring rangen Low cost, compact level transmitter
with integral transducern Four digit alpha-numeric displayn Auto variable power control for
difficult applicationsn PVDF wetted parts for corrosive applications
KSONIK™ MICRO COMPACT Ultrasonic Level Transmittern Up to 13 ft. / 4 m measuring rangen Low cost, compact level transmitter
with integral transducern Temperature compensationn PVDF wetted parts for corrosive applications
KSONIK™ MICRO Ultrasonic Level Transmitter and Switchn Up to 32 ft. / 10 m measuring rangen Low cost, compact level transmitter
with integral transducern 128 x 64 dot matrix displayn Open channel flow measurementn Auto variable power control for difficult applicationsn PVDF wetted parts for corrosive applicationsn Continuous level transmitter and level switchn Trend recorder
KSONIK™ III Long Range Ultrasonic Level Transmittern Long range up to 195 ft. / 60 m n Graphic LCD displayn Single or dual channel configuration n Integrated KSCOPE softwaren Automatic variable GAP for difficult applicationsn Trend recorder
Vibrating Liquid Level Switches Series
Model | RS80
VIBRATING FORK LEVEL SWITCHES
Model | VF30
Model | RS85
Vibrating Liquid Level Switch (Loop Powered Only) n Any mounting 3/4 inches NPT or largern Adjustable time delay (0.1 - 30 seconds)n Optional special alloy sensors: Hasetalloy
C-276 or Monel
RS85 Multi-Option Vibrating Liquid Level Switch n Continuous self-test diagnosticsn Extended probe lengths to 120”
(3048mm)n Exotic metal optionsn Variety of process connections
Resonator
RS80 Vibrating Liquid Level Switch n Direct replacement for ultrasonic GAP switches, RF capaci-
tance switches, float switches and other technologiesn Immune to low to medium coating or build-up on sensorn Standard 3/4” MNPT process connectionn Field selectable parameters with external magnet or
internal pushbuttons (fail safe, density)
Resonator
Vibrating Level Switch Interface Measurement for Solids in Liquids n Detects solids in water / liquidsn Accepts universal input voltagen Modular and simple designn No calibration required
Vibrating Level Switch for Powders in Granular Solids n Accepts universal input voltagen Acceptable for most powders and
granulated materials down to 1.3 PCFn Modular and simple designn Self cleaning
Liquid Level Switch Solutions
RF/CAPACITANCE CONTROLS
Multi Purpose & High Sensitivity RF Level Switch n Remote mounting up to 50 ft / 15 mn Explosion-proof enclosuren 0 to 30 second time delayn Temperature compensation
Loop Powered RF Level Transmitter n Low cost loop powered, 4-20 mA outputn Integral transmitter with dual compartment housingn External magnet calibration - no need to open casen Explosion-proof enclosure, intrinsically safe probes
eliminate explosion-proof conduit seal requirement
Compact All Star II RF Level Switch n Totally potted electronicsn Vibration resistantn NEMA 4 enclosuren 5, 10 or 15 second time delay
Robust All Star II RF Level Switch n DPDT relayn Rugged probe designsn Explosion-proof enclosuren 5, 10 or 15 second time delay
RF Capacitance Switch with KSHIELD™ Sensing Probes & Single Setpoint Electronics n Liquids and bulk solidsn KSHIELD™ sensing probes and single setpointn Electronics that provide immunity to buildupn Element sensitivity down to 0.5 pF
RF Capacitance Switch with Dual Setpoint & Pump Control n Liquids and bulk solidsn Easy setup via external magnet or push buttonsn Wide variety of 2-element sensing probes available up
to 450°F (232°C) / 3000 psin Field selectable modes of operations that include:
single setpoint, dual setpoint and pump control
SOLIDS LEVEL MEASUREMENT
THERMAL DISPERSION LEVEL / FLOW SWITCHES
Thermal Dispersion Flow / Temperature Switch (In-Line Unit) n No moving parts n Operating temperature of
-50°F to 350°F (-46°C to 177°C)n Pressure to 2000 psi(138 bar)n Extremely low flow applications
Thermal Dispersion Flow / Temperature Switch (In-Line Unit) n One switch for either flow or temperature applicationsn No moving partsn 316L stainless steel wetted partsn Ideal for low flow applications
Thermal Dispersion Flow/Level/ Temperature Switch (Sanitary) n One switch for gas or liquid flow, liquid level,
interface level or temperaturen Designed to 3A standardsn Temperature range of -50°F to 350°F
(-46°C to 177°C) standardn Optional electropolished wetted parts
Thermal Dispersion Flow / Level / Temperature Switch (Standard Response Time)n For liquids, gases and small granular solidsn One switch for gas or liquid flow, liquid level, interface
level or temperaturen Explosion proof, no moving partsn Temperature range of -320°F to 900°F (-195°C to 482°C)n Pressure to 10,000 psi (689 bar)
Electro-Mechanical Continuous Measurement System n Plumb bob devicen Insensitive to changes in product density, dust
in the silo, changes in moisture of the material and products that are inclided to stick
n Available in rope or tapen Variety of sensor weightsn Robust die cast housing
Rotating Paddle Switch n Drop-in replacement for existing rotary paddle switchesn Two 20 amp, SPDT switchn 120 or 240 operating voltagen Non-contact, double shielded bearings
Thermal Dispersion Flow / Level / Temperature Switch (Fast Response)n For liquids or small granular solidsn One switch for gas or liquid flow, liquid level,
interface level or temperaturen 316L stainless steel all welded construction
standardn Temperature range of -50°F to 350°F (-46°C
to 177°C) standard
Non-Contact Microwave Indicator n Blocked chute detectionn Point level detector n Not affected by dust or particle build up n Configurable relay output with on/off delay
BUOYANCY LEVEL SWITCHES
FIELD INDICATORS & CONTROLLERS
IR10 & PP10 External Relays n Simplifies field relay implementationn Easy mounting and installationn Vibration resistantn 10 amp contact rating
MS50 Multi Point Liquid Level Sensorn Unique magnetic coupling conceptn Switch trip points adjustable without removing
vessel from servicen Up to six (6) SPDT switches per unitn Interface level capability
MS8F Extended Body Horizontal Electric Level Switchn Custom insertion length up to 24
inches (610mm)n Available with polypropylene
displacer (MS8D) or stainless steel float (MS8F)
n Electrical contacts are magnetically isolated from process
n Hermetically sealed SPDT switchMS10 Electric Level Switch n Hermetically sealed SPDT switchn Pressure to 5000 psi (345 bar)n Choice of international flangesn Precision fabricated floats
Loop Powered Digital Indicator n Two ranges of zero and span allows calibration
in engineering units n Operating power derived from current loopn 2.5 volt maximum voltage dropn NEMA 4X or explosion-proof versions
Digital Process Monitor n Accepts 0-5V, 0-10V, 1-5V, 4-20mA or 0-20mA
analog signal input n NEMA 4X and explosion-proof enclosure optionn +24V output available for loop powern Optional RS422 or RS323 serial communication
MS8D Electric Level Displacer Switchn Polypropylene displacer for high pressure applications n Electrical contacts are magnetically isolated from processn Hermetically sealed SPDT switch (NO / NC Contact)n Vibration resistant
Mechanical Cage Level Switchn Rugged and robust chamber design
for demanding applications n One step switch point adjust n precision fabricated floats and
displacers n Easily retrofitted to most
competitor models)
KVIEW100 Digital Controller n MODBUS RTU communications n Ability to read 8 ea. 4-20 mA inputs and 4 ea.
pulse inputs n Relay outputs with adjustable dead band n 2 ea. 4-20 mA programmable outputs n Large transflective display makes it easy to
read indoors or in direct sunlight
KVIEW10 Digital Controller n MODBUS RTU communications n Ability to read and power 4 ea. 4-20 mA input signals and 2 ea.
pulse inputs n Relays with adjustable DB and 4 ea. 4-20 mA outputs n Large transflective display makes it easy to read indoors or in
direct sunlight n Displays in feet and inches, psi, mA, gpm, or custom units
BETA PRESSURE/TEMPERATURE SWITCHES
SPECIALTY LEVEL INSTRUMENTS
Tank Car Gauging Device n Provides isolation from tank fluids
while gaugingn Temperature range of -50°F to 300°F
/ -45°C to 149°Cn Pressures to 600 psi / 41 barn Measures specific gravities from
0.44 with a single float
AccuTrak AT500MD Drilling Mud Pit Level Transmittern High resolution 4-20 mA output - no signal
conditioner requiredn Rugged design: 3/4 inch schedule 40n Zero and span setpoints adjust digitallyn Calibrates without opening enclosure
BETA Pressure/Temperature Switchn Worldwide agency approvalsn ”User Friendly” Modifications - Standard features incorporated
for your safetyn Wide rangeability with 100% accuracy over the full rangen Only 3 process wetted partsn Very high overrange pressures - No setpoint shift or damage
to sensorn No maintenance
Seal Fluid Supply Tank n High visibility, magnetically coupled
barrier fluid level indicationn Magnetically coupled high / low level
switches availablen Designed for barrier fluid specific gravity
requirementsn Used in applications where a 2 to 5
gallon vessel is needed
Valve Positioner n High accuracy .01 % of full scale with patented
magnetostrictive sensing technologyn Microprocessor-based n Never requires recalibrationn Field replaceable module
DX80 WirelessTransmitter & Receiver n Eliminate high cost of wiringn Weatherproofn DC power requiredn Line of sight ranges up to 3 miles
with included antenna
Providing Level Solutions: Anytime, Anywhere.
CBR-0003-1e (03-2010) DCN0434
Global Manufacturing Facilities
K-TEK Instruments (Pty) Ltd.Gauteng, South Africa+27 11 608 2777
K-TEK Level Eng. Pvt. Ltd.Mumbai, India+91 022 4156 6100
K-TEK (Tianjin) Level Co., Ltd.Tianjin, China+86 22 59813068
K-TEK BVRijswijk, The Netherlands+31 70 3199700
K-TEK Solids LevelHouston, TX USA+1(713) 462.7665
K-TEK Corp.Prairieville, LA USA+1(225) 673.6100
www.ktekcorp.comK-TEK 18321 Swamp Road | Prairieville, LA 70769tel: +1(225)673.6100 | fax: +1(225)673.2525toll free: +1(800)735.5835 [email protected] | www.ktekcorp.comThe Leader in Level Detection