10

LINK LT ETA 2018The installed anchor is shown in Annex 1. The anchor is installed in a drilled hole; tightening the draws the cone into The anchors are made from zinc-plated and passivated

  • Upload
    others

  • View
    2

  • Download
    0

Embed Size (px)

Citation preview

Page 1: LINK LT ETA 2018The installed anchor is shown in Annex 1. The anchor is installed in a drilled hole; tightening the draws the cone into The anchors are made from zinc-plated and passivated
Page 2: LINK LT ETA 2018The installed anchor is shown in Annex 1. The anchor is installed in a drilled hole; tightening the draws the cone into The anchors are made from zinc-plated and passivated
Page 3: LINK LT ETA 2018The installed anchor is shown in Annex 1. The anchor is installed in a drilled hole; tightening the draws the cone into The anchors are made from zinc-plated and passivated
Page 4: LINK LT ETA 2018The installed anchor is shown in Annex 1. The anchor is installed in a drilled hole; tightening the draws the cone into The anchors are made from zinc-plated and passivated
Page 5: LINK LT ETA 2018The installed anchor is shown in Annex 1. The anchor is installed in a drilled hole; tightening the draws the cone into The anchors are made from zinc-plated and passivated
Page 6: LINK LT ETA 2018The installed anchor is shown in Annex 1. The anchor is installed in a drilled hole; tightening the draws the cone into The anchors are made from zinc-plated and passivated
Page 7: LINK LT ETA 2018The installed anchor is shown in Annex 1. The anchor is installed in a drilled hole; tightening the draws the cone into The anchors are made from zinc-plated and passivated
Page 8: LINK LT ETA 2018The installed anchor is shown in Annex 1. The anchor is installed in a drilled hole; tightening the draws the cone into The anchors are made from zinc-plated and passivated
Page 9: LINK LT ETA 2018The installed anchor is shown in Annex 1. The anchor is installed in a drilled hole; tightening the draws the cone into The anchors are made from zinc-plated and passivated
Page 10: LINK LT ETA 2018The installed anchor is shown in Annex 1. The anchor is installed in a drilled hole; tightening the draws the cone into The anchors are made from zinc-plated and passivated