The aluminum liniLED® Aeris profile is a durable profile which can be finished with a diffuse or clear cover. Profiles come in 3/4" and 1-1/4" profiles. Illuminate the profile with liniLED® PCB or liniLED® Top LED strips. Aeris profiles can be fully encapsulated for IP67 outdoor applications. White, RGB color changing or mono colors are available. Diffused lenses are available as flush fitting or raised to provide horizontal illumination from the sides.

Cordless low voltage. These ultra lightweight extrusions can be suspended with adjustable, cordless low voltage cable suspension to create a free-floating appearance.

liniLED® Aeris Profile

Summer 2016 www.organiclighting.com

Available in four dimensions (3/4" Low, 3/4" High, 1-1/4" Low, 1-1/4" High) with an optional cable trayYour choice of three luminous intensities (Deco, Power and PSP)Profile designed to secure liniLED strips® in placeCan be used with liniLED® PCB or Top LED stripsColor temperatures: 2400K, 2700K, 3000K, 4000K and 6500KDeco and Power versions also available in Red, Green, Blue and AmberLife >50,000 hours (LM79)

ConstructionExtruded aluminum housing. Diecast endcaps. Wire through connections optional. Cast swivels.

Lens optionsSnap-in polycarbonate lens in your choice of clear or diffuse low cover or a diffused high cover.

End capsSeveral choices of end caps, see spec sheet.

MountingSurface or suspension mount. Adjustable low-voltage cable suspension kits available.

IP40It's possible to compose a 'plug & play' IP40 version of the liniLED® Aeris Profile. The Aeris Profile is complete with a liniLED® strip, cable (incl. cable entry on the desired position), end cap(s) and lens. In addition to the luminous intensity, light colour and effect, it's possible to finish this beautiful lighting fixture with features and accessories of your choice.

IP67In addition to the IP40 version, it's also possible to order a 'plug & play' IP67 encapsulated version. The liniLED® Aeris Profile consists of a liniLED® PCB LED strip, which is poured with PU resin (clear/diffuse). Just like the IP40 version, this lighting fixture comes with cables, end caps and your choice of accessories. IP67 must be manufactured at the factory.

Driver / ElectricalChoice of Universal Voltage (120-277V), electric driver or 347V electronic drivers – in either Non-Dim or 0-10v / 10% Dimming. Optional Emergency Battery Pack also available.

FinishAnodized aluminum

Summer 2016 www.orgatech.com

liniLED® Aeris Profile3/4" and 1-1/4"

Specifications are correct at the time of publishing, but may be modified or improved in accordance with current electrical, safety or manufacturing methods without notification.

.75"

(1

9 m

m)

0.8" (20.20 mm)

3/4" Low

1.48

" (3

7.5

mm)

0.8" (20.20 mm)

19

3/4" High

.75"

(1

9 m

m)

1.2" (30 mm)

1 1/4"Low

1.48

" (1

9 m

m)

1.2" (30 mm)

1-1/4" High