Liners, Covers and Accessories PCC Guards Catalog · 2018-09-16 · Fiberglass Buckets and Guards Liners, Covers and Accessories 8301 Clinton Park Dr • Fort Wayne, IN 46825 •

Fiberglass Buckets and GuardsLiners, Covers and Accessories

8301 Clinton Park Dr • Fort Wayne, IN 46825 • 260-484-3139 • Fax: 260-483-2532

BucketTruckParts.com • [email protected]

PCC Guards Catalog Last Revised: 9/2018 Please scroll down to find our Replacement Guards Catalog. We have been building fiberglass parts by hand for over 60 years and have many molds for parts that are no longer listed. If you do not see your guard, please call or email! Disclaimer: Plastic Composites Co (PCC) manufactures aftermarket replacement fiberglass parts, buckets, and guards for the Aerial Manlift (Bucket Truck) Industry. All brands listed below are trademarks of their respective owners and are only used for reference purposes. Our products are engineered and manufactured to meet or exceed all applicable OSHA and/or ANSI standards. Plastic Composites Co is not sponsored by or affiliated with any of the companies listed below. These manufacturers do not manufacture, sell, or distribute the goods advertised herein, and PCC makes no claim that the replacement fiberglass buckets manufactured for these companies’ vehicles comply with the OEM’s manufacturing standards.

• Altec, Aerial Lift of CT, Holan, Lift-All, MTI, Pitman, Reach All, TECO, and Telsta Electric Lift are registered trademarks of Altec, Inc.

• Asplundh is a registered trademark of Asplundh Tree Expert Company • Dur-A-Lift is a registered trademark of Diversified Technologies Inc. • ETI and Hidro-Grubert are registered trademarks of Palfinger • National Crane is a registered trademark of The Manitowoc Company • Posi-Plus is a registered trademark of Posi-Plus • Terex, Hi-Ranger, Telelect, Texoma are registered trademarks of Terex Corporation • Versalift is a registered trademark of Time Manufacturing Company

Fax 260-483-2532 • www.BucketTruckParts.com

CALL TO ORDER 260-484-3139

R E P L A C E M E N T F I B E R G L A S S G U A R D S ˙All parts are PCC manufactured replacements for specified brands.

1 • Section 2 Jan 2017

PCC Part # Description

41511000 Control Cover Altec 30” x 14” x 10” - Altec P/N 870230785 or 021-1121-01 (1 ring)

41511200 Control Cover 32-1/2” x 18-1/2” x 12-1/2” - Altec P/N 026-1183-02 (2 ring)

41530350 Left Hose Guide 1-1/2” P/N 871004515

41531100 Hose Cover (solid at bottom) Altec P/N 871003624±

PCC Replacement Guards that fit Altec LRIII (continued on next page)

insideside

insideside

side front inside

side top inside



R E P L A C E M E N T F I B E R G L A S S G U A R D SAll parts are PCC manufactured replacements for specified brands.

Call for additional bucket configurations.

Jan 2017 Section 2 • 2


41531300 Hose Shield Bucket End Altec P/N 025-0353-01 - Also LRV 871001359

41531400 Outer pivot end hose shieldAltec P/N 025-353-02 or 871001360w


insidefront side

side inside inside

41551100 Platform Mounting Shaft Cover Bottom Altec P/N 026-1206-01 or 871003596

41551000 Platform Mounting Shaft Cover Top (Same as 41563030) Altec P/N 870261317 or 070103030

top side bottom inside

top side bottom inside

3 • Section 2 Jan 2017Fax 260-483-2532 • www.BucketTruckParts.com





41551170 Bucket end, End Plate 8-3/4” diameter

41551200 Bucket end, End Plate 9-3/4” diameter- Altec P/N 025-0352-01

41551300 Outer Pivot end, End plate 10-3/4” diameter- Altec P/N 025-0328-21

41551500 Lower Boom Leveling Cover Lower Section O/S 81-3/4” x 14-1/2” x 4-5/8” - Altec P/N 023-0885-23

41551600 Lower Boom Leveling Cover Upper Section (has hump) O/S 82-1/4” x 15” x 4-5/8” - Altec P/N 023-466-23 or 870230466 - Also on LRV 871001359

41551700 Lower Boom Leveling Cover Center Section 64” long Altec P/N 023-0574-03

41551800 Lower Boom Leveling Cover Center Section 39” long Altec P/N 023-0574-05

41551900 Set Lower Boom Leveling Covers 41551500, 41551600, 41551700, 41551800

top

front top

top

inside

front



R E P L A C E M E N T F I B E R G L A S S G U A R D S


PCC Replacement Guards that fit Altec LRIII and LRIV Series






42051996 Circular Boom Cover - 96”


41560410 Hose Cover Lower Boom Elbow Altec P/N 7044410 or 070600410

41561012 Upper boom end cover 9-7/8” - Altec P/N 070101012

41561418 Platform shaft weldment cover - large half - bottom Altec P/N for set 870261418 (PCC sells separately with 41561419)

41561419 Platform shaft weldment cover - small half - top Altec P/N for set 870261418 (PCC sells separately with 41561418)

41561011 Upper boom cover Altec P/N 070101011

42052100 Tape for plastic boom covers - 3” x 108’

PCC Replacement Guards that fit Altec LRIII

PCC Replacement Guards that fit Altec LRV (continued on next page)

41561418 with 41561419

front

front

41561418 front 41561419 side

outside



R E P L A C E M E N T F I B E R G L A S S G U A R D S All parts are PCC manufactured replacements for specified brands.


41564002 Platform Cover Right Side (AEGIS) - 2007 and earlier Altec P/N 7044002 or 070114002

41564003 Platform Cover Left Side (AEGIS) - 2007 and earlier Altec P/N 7044003 or 070114003

41564000 Boom Tip Cover Top (AEGIS) Altec P/N 7044000 or 070114000

41564001 Boom Tip Cover Bottom (AEGIS) Altec P/N 7044001 or 070114001


41563012 Boom Tip Hose Cover (Large) 41563013 Boom Tip Hose Cover (Small)

41563030 Platform cover top (same as 41551000) Altec P/N for set 0706103030

41563031 Platform cover bottom (same as 41551000 without cutouts on bottom) Altec P/N for set 0706103030

PCC Replacement Guards that fit Altec LRV

41564003 side41564003 bottom41564002 bottom41564002 side 41564002 with 41564003

bottom

41563012 with 41563013

front˙ side inside

41564000 41564000 with 41564001





PCC Replacement Guards that fit Altec LRV Platform Mounting Assembly, Shaft Mounted Controls





PCC Replacement Guards that fit Altec LRV Shaft Mounted Controls with Dashboard, Front Mount Unit

’07

& e

arli

er

’07

& e

arli

er





PCC Replacement Guards that fit Altec LRV Platform Mounting Assembly, Platform Mounted Controls





PCC Replacement Guards that fit Altec LRVBoom Assembly - Front Mounted, Platform Mounted Controls






41510200 Control Guard for end hung bucket 27” x 17” x 10” - Altec P/N 70680241 (cut out right side)

PCC Replacement Guards that fit Altec LB Series

insidefront front showing right cut-out

41510205 Control Guard for end hung bucket 27” x 17” x 10” - Altec P/N 70680241 (cut out left side)

insidetop showing left cut-out

41550500 Altec Boom Tip Cover Top - Altec P/N 4-706-00068 or 706-00193 (No large holes) 41550600 Altec Boom Tip Cover Bottom - Altec P/N 4-706-00069 or 706-00194 (No large holes)

41550500 side

When looking at the end of the boom, if the bucket is mounted on the right side of the boom, then the parts are Top & Bottom. If the bucket is mounted on the left side, then the parts are reversed, Bottom & Top.

41550600 side 41550600 insideboth side by side

41550500 side 41550500 inside

Jan 2017 Section 2 • 12Fax 260-483-2532 • www.BucketTruckParts.com



PCC Replacement Guards that fit Altec LB Series




41510150 Control Guard 22-1/4” x 17” x 11”AA Series

41520400 Side Plate Guard - end hung bucket (bucket requires 2) Altec P/N 4-706-80008, 706-80109, 706-80095, 706-80146, 706-80690 or 706-80691

41530300 Control line cover duct for end hung bucket L shape 16” long

41530310 Control line cover duct for end hung bucket L shape 17-1/2” long (new larger)

PCC Replacement Guards that fit Altec: Miscellaneous

insidesidefront

side inside

side inside

front

top

bottom

inside


41510100 Control Guard 22” x 17-1/2” x 7-1/2” Altec 70680007 AA600 AM900 LB650





PCC Replacement Guards that fit Altec AA Series






PCC Replacement Guards that fit Lift-AllPCC Part # Description

44510100 Control Cover Liftall 18” x 20” x 9”

side

top

side

inside

inside inside


41510350 Altec Style Control Guard - AT37G Series 34” x 26-1/2” x 13”

PCC Replacement Guards that fit Altec AT Series

44510932 Liftall Hose Cover

44518632 Liftall Hose Cover

445510932 top

44518632 top 44518632 inside

445510932 inside




48030300 Line Duct Cover

48050500 Upper Elbow Cover - Small TECO P/N 70737006

48050600 Upper Elbow Cover - Saturn style TECO P/N 70737108 XT-52

top

top

top

inside


43510600 Control Guard 30” x 20” x 10” - HR P/N 447276

PCC Replacement Guards that fit Hi-Ranger XT (continued on next page)

front side inside

PCC Replacement Guards that fit TECOPCC Part # Description

48010100 Control Guard 16” x 16” x 7” TECO P/N 30306403

front inside





43541600 Corner Duct HR P/N 447278

insidefront

top side up side down


43510610 Control Guard 30” x 18” x 8-1/2” I/S XT-52


43510620-21 43510620-21 43510620-21

43510620-21 right

43510620-21 left

435610622-23 left 435610622-23 right

43510622 Control Guard Dump Style - fiberglass - HR small upper cover HR P/N 453817

43510623 Control Guard Dump Style - fiberglass - HR large lower cover HR P/N 454696 without extra cylinder on bottom of valve body

43510620 Control Guard Non-Dump - fiberglass - upper half HR P/N 453415 small

43510621 Control Guard Non-Dump - fiberglass - lower half HR P/N 454855 large

620

621

622

623






43510626 Control Guard Dump Style Extended - fiberglass - HR extended lower cover to accommodate extra cylinder on bottom of valve body

43541000 Upper Boom lower hose cover HR P/N 446851, may also correspond to 450267 or 475602

43541300 End Plate Bucket End Upper Boom (Clear Poly. Carb.) 10” x 10” x 1” radiuses HR P/N 444727

43541301 End Plate Elbow End Upper Boom (Clear Poly. Carb.) 8-1/2” x 8-1/2” x 1” radiuses

43541010 Upper Boom Tip Hose Cover HR P/N 447253

43541813 Double Tools Cover with Tilt

inside

top inside

front

insidetopside




PCC Replacement Guards that fit Hi-Ranger XT





Section 2 • 20Jan 2017

outside


43541302 End Plate Elbow End lower Boom (Clear Poly. Carb.) 10” x 8-1/2” x 1” radiuses


43510110 Control Guard fits 5TC 21” x 17-3/4” x 8”

43510200 Control Guard fits 5F/5G/5H 21” x 17-1/2” x 8”

43541303 End Plate Elbow End lower Boom (Clear Poly. Carb.) 9-3/4” x 8-1/2” x 1” radiuses

43542096 Rectangular boom protective cover (two halves) 10” x 6” x 96”

42052100 Tape for plastoc boom covers - 3” x 108’

PCC Replacement Guards that fit Hi-Ranger XT

PCC Replacement Guards that fit Hi-Ranger 4 & 5 series (continued on next page)

top inside





Jan 2017 21 • Section 2


43520800 Sheave Guard fits 5F/5FB 9-1/2” x 28” x 17” tall

43520900 Sheave Guard fits 5H - Fits Models 5FA/5G/5H/6H 20” x 28” x 19” - flat surface depth of 11”

435210XX Sheave Guard fits 5TD Prior to PCC 2003

43531618 Control Guard fits 5OC I/S Top 18” x 19” x 7” Bottom 17-1/2” x 19” x 6-1/2”

43550203 Cover Jib art. cyl. - on right side looking down at elbow fits 5TC HR P/N 460203


side inside

4352101X Sheave Guard fits 5TD PCC 2003 and later

sidefront back

top







43556792 Cover Jib art. cyl. - on left side looking down at elbow fits 5TC HR P/N 456792

43551802 Cover Jib winch - inside fits 5TC HR P/N 461802

43551801 Cover Jib winch - outside fits 5TC HR P/N 461801


side front side inside

43550205 Cover Rotater bracket fits 5TC HR P/N 460205

43550210 Cover Lanyard anchor fits 5TC HR P/N 460210

top side

front back

inside

side top inside





43556793 Cover Jib rotation arm fits 5TC HR P/N 456793

43556794 Cover Jib cyl. anchor fits 5TC HR P/N 456794

43556789 Cover Control - bottom fits 5TC HR P/N 456789

PCC Replacement Guards that fit Hi-Ranger 4 & 5 series

side 3/4 view side inside


43556786 Cover boot - top fits 5TC HR P/N 456786

43556787 Cover Boot-bottom fits 5TC HR P/N 456787

43556788 Cover Control - top fits 5TC HR P/N 456788

side side top inside

side top side

top side inside

inside






43531100 Duct Cover 24” Bucket


43531210 Duct Cover 30” Bucket PCC bucket

43531210 Duct Cover 30” Bucket - PCC bucket



43531401 Duct Cover 48” Bucket - wide other (does not fit PCC 48” buckets)

43510550 Plastic Conversion Guard fits 6T

43531415 Duct Cover fits 6TD HR P/N 101920

side inside

PCC Replacement Guards that fit Hi-Ranger: Miscellaneous (continued on next page)

insidetop

side inside


43510300 Control Guard fits 6T 19” x 18” x 7”

43510400 Control Guard fits 6H 19” x 18” x 7” (2-1/2” bottom hole)

43510500 Control Guard fits 6H 19” x 18” x 7” (3-1/2” bottom hole)

PCC Replacement Guards that fit Hi-Ranger 6 series






43510624 TPL Control Guard - Telelect/HR style 24” x 23” x 11- 1/4”

43510625 TPL Boom Guard - Telelect/HR style 17” x 7” x 5-1/2”

PCC Replacement Guards that fit Telelect


43531410 Duct Cover 48” Bucket - PCC bucket

43531411 Duct Cover 48” Bucket - wide current PCC bucket

43541700 Control Head Bracket - Upper

inside

PCC Replacement Guards that fit Hi-Ranger: Miscellaneous

insidetop

top

43548510 Tool Outlet Cover for HRX-55

43544724 Access Cover Upper or Lower Boom HR P/N 444724

41020410 Clamp Protection Cover - 2 pieces





side

PCC Replacement Guards that fit Asplundh (continued on next page)


42011000 Control Cover for Asplundh / Altec - old style 23” x 13-1/2” x 7-1/2” (w/o cutout at bottom)

front

top

top

bottom inside


41010101 Control Guard AL 6050 I/S Top 28-1/2” x 15” x 11-1/2” Bottom 28-1/8” x 15” x 7” (color - white)

41070200 Tool Block

41050100 Boom Tip Cover 19-3/4” x 10-3/4” - Center 13-1/2” x 10-3/4” (Polycarbonate)

PCC Replacement Guards that fit Aerial Lift of CT





PCC Replacement Guards that fit Asplundh

PCC Replacement Guards that fit Versalift

side side front inside


49510100 Control Guard 20-1/2” x 23” x 8”


42011100 Control Cover for Asplundh / Altec - current 22” x 14” x 7-1/2” (with cutout at bottom)

42052100 Tape for plastic boom covers - 3” x 108’

outside

42051500 Lower Boom Leveling Cover 30” Asplundh LR45 & LR50 Center section

42051600 Lower Boom Leveling Cover upper section (has hump)

42051300 Lower Boom Leveling Cover Asplundh LR45 & LR50 Lower section

42051400 Lower Boom Leveling Cover 60” Asplundh LR45 & LR50 Center section

front

front

42051800 Set LR 45-50 Lwr Boom Leveling Covers 420513, 42051400, 42051500, 42051600

42051996 Circular Boom Cover - 96”

bottom inside

Documents

Liners, Covers and Accessories PCC Guards Catalog · 2018-09-16 · Fiberglass Buckets and Guards Liners, Covers and Accessories 8301 Clinton Park Dr • Fort Wayne, IN 46825 •