Lineas Ocupadas Elastix

Elastix Forums :: Open Source Unified Communications Server - Elastix :: The Open Source Unified Communications ServerGenerated: 9 April, 2012, 09:05

error "todas las lineas esta ocupadas"Posted by apachont - 2010/05/19 12:15_____________________________________

Hola,

tengo instalado elastix 1.6 configurado para una troncal SIP de EPM en Bogota, Colombia. la troncaltiene 1 CID y 20 DID se supone que en este momento tengo todo bien configurado para la entrada dellamadas pero al momento de sacar las llamadas esta reportado el error "lo sentimos todas las lineasestan ocupadas por favor intente mas tarde". Ayuda por favor

Andres

============================================================================

Re:error "todas las lineas esta ocupadas"Posted by jgutierrez - 2010/05/19 12:58_____________________________________

Hay algunos proveedor SIP que si pones un CID correcto, no te dejan hacer la llamada. Así mismo sepuede dar el caso de que estés enviando de formaincorrecta los dígitos, es decir, puede que tuoperador esté esperando un prefijo y no se lo estás enviando.

Te recomiendo que cuando hagas una llamada, tengas en otr ventana ejecutando lo siguiente: tail -f /var/log/asterisk/full | grep response Y así veas el mensaje SIP de error, y en conjunto con tu proveedor vean cuál es el problema.

============================================================================

Re:errorPosted by tbote - 2010/05/20 17:09_____________________________________

jgutierrez wrote: Hay algunos proveedor SIP que si pones un CID correcto, no te dejan hacer la llamada. Así mismo sepuede dar el caso de que estés enviando de formaincorrecta los dígitos, es decir, puede que tuoperador esté esperando un prefijo y no se lo estás enviando.

Te recomiendo que cuando hagas una llamada, tengas en otr ventana ejecutando lo siguiente: tail -f /var/log/asterisk/full | grep response Y así veas el mensaje SIP de error, y en conjunto con tu proveedor vean cuál es el problema.

Hola Jorge

Mi problema es similar a este y lo puse en otro hilo pero no obtuve solución, si yo marco un nº erróneo oque no existe, la centralita me dice que todas las líneas están ocupadas, cuando el error debería serque el número marcado no existe o es incorrecto. ¿Hay alguna manera de controlar esos errores paraque la locución sea la correcta? Es que causa confusión porque la gente intenta una y otra vez llamar aesos números pensando en que efectivamente las líneas están ocupadas, cuando no es así.

1 / 12


Saludos

============================================================================

Re: Re:errorPosted by afos0110 - 2011/03/26 10:39_____________________________________

Yo tambien tengo el mismo problema pero es con una troncal SIP de EMCALI en colombia.

Quedo en espera de una pronta solucion.

Saludos

JF

============================================================================

Re: error "todas las lineas esta ocupadas"Posted by jgutierrez - 2011/04/07 14:24_____________________________________

Deben pegar la salida del CLI cuando se marca a un número equivocado, y a un número ocupado

============================================================================

Re: error "todas las lineas esta ocupadas"Posted by afos0110 - 2011/04/20 00:35_____________________________________

http://www.elastix.org/images/fbfiles/files/Numero_equivocado_o_no_existente.txt http://www.elastix.org/images/fbfiles/files/Numero_equivocado_o_no_existente.txt http://www.elastix.org/images/fbfiles/files/Numero_equivocado_o_no_existente.txt Buenas Noche, acontinuacion estos son los CLI solicitados:

NUMERO EQUIVOCADO

sterisk 1.4.36, Copyright (C) 1999 - 2010 Digium, Inc. and others. Created by Mark Spencer Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for detail s. This is free software, with components licensed under the GNU General Public License version 2 and other licenses; you are welcome to redistribute it under certain conditions. Type 'core show license' for details. ========================================================================= Connected to Asterisk 1.4.36 currently running on elastix (pid = 2996) Verbosity is at least 3 elastix*CLI> elastix*CLI> clear No such command 'clear' (type 'help clear' for other possible commands)

2 / 12


elastix*CLI> cl No such command 'cl' (type 'help cl' for other possible commands) elastix*CLI> Disconnected from Asterisk server # clear # asterisk -r Asterisk 1.4.36, Copyright (C) 1999 - 2010 Digium, Inc. and others. Created by Mark Spencer Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details. This is free software, with components licensed under the GNU General Public License version 2 and other licenses; you are welcome to redistribute it under certain conditions. Type 'core show license' for details. ========================================================================= Connected to Asterisk 1.4.36 currently running on elastix (pid = 2996) Verbosity is at least 3 -- Executing Macro("SIP/599-00000f47", "user-callerid|SKIPTTL|") in new stack -- Executing Set("SIP/599-00000f47", "AMPUSER=599") in new stack -- Executing GotoIf("SIP/599-00000f47", "0?report") in new stack -- Executing ExecIf("SIP/599-00000f47", "1|Set|REALCALLERIDNUM=599") in new stack -- Executing Set("SIP/599-00000f47", "AMPUSER=599") in new stack -- Executing Set("SIP/599-00000f47", "AMPUSERCIDNAME=599") in new stack -- Executing GotoIf("SIP/599-00000f47", "0?report") in new stack -- Executing Set("SIP/599-00000f47", "AMPUSERCID=599") in new stack -- Executing Set("SIP/599-00000f47", "CALLERID(all)="599" ") in new stack -- Executing ExecIf("SIP/599-00000f47", "0|Set|CHANNEL(language)=") in new stack -- Executing GotoIf("SIP/599-00000f47", "1?continue") in new stack -- Goto (macro-user-callerid,s,19) -- Executing NoOp("SIP/599-00000f47", "Using CallerID "599" ") in new stack -- Executing NoOp("SIP/599-00000f47", "Calling Out Route: 6411000") in new stack -- Executing Set("SIP/599-00000f47", "MOHCLASS=default") in new stack -- Executing Set("SIP/599-00000f47", "_NODEST=") in new stack -- Executing Macro("SIP/599-00000f47", "record-enable|599|OUT|") in new stack -- Executing GotoIf("SIP/599-00000f47", "1?check") in new stack -- Goto (macro-record-enable,s,4) -- Executing AGI("SIP/599-00000f47", "recordingcheck|20110420-002558|1303277158.3936") in newstack -- Launched AGI Script /var/lib/asterisk/agi-bin/recordingcheck recordingcheck|20110420-002558|1303277158.3936: Outbound recording not enabled -- AGI Script recordingcheck completed, returning 0 -- Executing MacroExit("SIP/599-00000f47", "") in new stack -- Executing Macro("SIP/599-00000f47", "dialout-trunk|2|2356659|") in new stack -- Executing Set("SIP/599-00000f47", "DIAL_TRUNK=2") in new stack -- Executing GosubIf("SIP/599-00000f47", "0?sub-pincheck|s|1") in new stack -- Executing GotoIf("SIP/599-00000f47", "0?disabletrunk|1") in new stack -- Executing Set("SIP/599-00000f47", "DIAL_NUMBER=2356659") in new stack -- Executing Set("SIP/599-00000f47", "DIAL_TRUNK_OPTIONS=trWw") in new stack -- Executing Set("SIP/599-00000f47", "OUTBOUND_GROUP=OUT_2") in new stack -- Executing GotoIf("SIP/599-00000f47", "1?nomax") in new stack -- Goto (macro-dialout-trunk,s,9) -- Executing GotoIf("SIP/599-00000f47", "0?skipoutcid") in new stack -- Executing Set("SIP/599-00000f47", "DIAL_TRUNK_OPTIONS=") in new stack -- Executing Macro("SIP/599-00000f47", "outbound-callerid|2") in new stack

3 / 12


-- Executing ExecIf("SIP/599-00000f47", "0|SetCallerPres|") in new stack -- Executing ExecIf("SIP/599-00000f47", "0|Set|REALCALLERIDNUM=599") in new stack -- Executing GotoIf("SIP/599-00000f47", "1?normcid") in new stack -- Goto (macro-outbound-callerid,s,6) -- Executing Set("SIP/599-00000f47", "USEROUTCID=") in new stack -- Executing Set("SIP/599-00000f47", "EMERGENCYCID=") in new stack -- Executing Set("SIP/599-00000f47", "TRUNKOUTCID=") in new stack -- Executing GotoIf("SIP/599-00000f47", "1?trunkcid") in new stack -- Goto (macro-outbound-callerid,s,12) -- Executing ExecIf("SIP/599-00000f47", "0|Set|CALLERID(all)=") in new stack -- Executing ExecIf("SIP/599-00000f47", "0|Set|CALLERID(all)=") in new stack -- Executing ExecIf("SIP/599-00000f47", "0|Set|CALLERID(all)=") in new stack -- Executing ExecIf("SIP/599-00000f47", "0|SetCallerPres|prohib_passed_screen") in new stack -- Executing GosubIf("SIP/599-00000f47", "0?sub-flp-2|s|1") in new stack -- Executing Set("SIP/599-00000f47", "OUTNUM=2356659") in new stack -- Executing Set("SIP/599-00000f47", "custom=SIP/6411000") in new stack -- Executing ExecIf("SIP/599-00000f47", "0|Set|DIAL_TRUNK_OPTIONS=M(setmusic^default)") innew stack -- Executing Macro("SIP/599-00000f47", "dialout-trunk-predial-hook|") in new stack -- Executing MacroExit("SIP/599-00000f47", "") in new stack -- Executing GotoIf("SIP/599-00000f47", "0?bypass|1") in new stack -- Executing GotoIf("SIP/599-00000f47", "0?customtrunk") in new stack -- Executing Dial("SIP/599-00000f47", "SIP/6411000/2356659|300|") in new stack -- Called 6411000/2356659 -- SIP/6411000-00000f48 is circuit-busy == Everyone is busy/congested at this time (1:0/1/0) -- Executing NoOp("SIP/599-00000f47", "Dial failed for some reason with DIALSTATUS =CONGESTION and HANGUPCAUSE = 1") in new stack -- Executing Goto("SIP/599-00000f47", "s-CONGESTION|1") in new stack -- Goto (macro-dialout-trunk,s-CONGESTION,1) -- Executing Set("SIP/599-00000f47", "RC=1") in new stack -- Executing Goto("SIP/599-00000f47", "1|1") in new stack -- Goto (macro-dialout-trunk,1,1) -- Executing Goto("SIP/599-00000f47", "continue|1") in new stack -- Goto (macro-dialout-trunk,continue,1) -- Executing GotoIf("SIP/599-00000f47", "1?noreport") in new stack -- Goto (macro-dialout-trunk,continue,3) -- Executing NoOp("SIP/599-00000f47", "TRUNK Dial failed due to CONGESTION HANGUPCAUSE:1 - failing through to other trunks") in new stack -- Executing Set("SIP/599-00000f47", "CALLERID(number)=599") in new stack -- Executing Macro("SIP/599-00000f47", "outisbusy|") in new stack -- Executing Progress("SIP/599-00000f47", "") in new stack -- Executing GotoIf("SIP/599-00000f47", "0?emergency|1") in new stack -- Executing GotoIf("SIP/599-00000f47", "0?intracompany|1") in new stack -- Executing Playback("SIP/599-00000f47", "all-circuits-busy-now&pls-try-call-later| noanswer") innew stack -- Playing 'all-circuits-busy-now' (language 'es') -- Playing 'pls-try-call-later' (language 'es') -- Executing Congestion("SIP/599-00000f47", "20") in new stack == Spawn extension (macro-outisbusy, s, 5) exited non-zero on 'SIP/599-00000f47' in macro'outisbusy' == Spawn extension (from-internal, 2356659, 7) exited non-zero on 'SIP/599-00000f47'

4 / 12


-- Executing Macro("SIP/599-00000f47", "hangupcall") in new stack -- Executing GotoIf("SIP/599-00000f47", "1?noautomon") in new stack -- Goto (macro-hangupcall,s,3) -- Executing NoOp("SIP/599-00000f47", "TOUCH_MONITOR_OUTPUT=") in new stack -- Executing GotoIf("SIP/599-00000f47", "1?skipblkvm") in new stack -- Goto (macro-hangupcall,s,7) -- Executing GotoIf("SIP/599-00000f47", "1?theend") in new stack -- Goto (macro-hangupcall,s,9) -- Executing Hangup("SIP/599-00000f47", "") in new stack == Spawn extension (macro-hangupcall, s, 9) exited non-zero on 'SIP/599-00000f47' in macro'hangupcall' == Spawn extension (from-internal, h, 1) exited non-zero on 'SIP/599-00000f47' elastix*CLI>

NUMERO OCUPADO

# asterisk -r Asterisk 1.4.36, Copyright (C) 1999 - 2010 Digium, Inc. and others. Created by Mark Spencer Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details. This is free software, with components licensed under the GNU General Public License version 2 and other licenses; you are welcome to redistribute it under certain conditions. Type 'core show license' for details. ========================================================================= Connected to Asterisk 1.4.36 currently running on elastix (pid = 2996) Verbosity is at least 3 -- Executing Macro("SIP/599-00000f4b", "user-callerid|SKIPTTL|") in new stack -- Executing Set("SIP/599-00000f4b", "AMPUSER=599") in new stack -- Executing GotoIf("SIP/599-00000f4b", "0?report") in new stack -- Executing ExecIf("SIP/599-00000f4b", "1|Set|REALCALLERIDNUM=599") in new stack -- Executing Set("SIP/599-00000f4b", "AMPUSER=599") in new stack -- Executing Set("SIP/599-00000f4b", "AMPUSERCIDNAME=599") in new stack -- Executing GotoIf("SIP/599-00000f4b", "0?report") in new stack -- Executing Set("SIP/599-00000f4b", "AMPUSERCID=599") in new stack -- Executing Set("SIP/599-00000f4b", "CALLERID(all)="599" ") in new stack -- Executing ExecIf("SIP/599-00000f4b", "0|Set|CHANNEL(language)=") in new stack -- Executing GotoIf("SIP/599-00000f4b", "1?continue") in new stack -- Goto (macro-user-callerid,s,19) -- Executing NoOp("SIP/599-00000f4b", "Using CallerID "599" ") in new stack -- Executing NoOp("SIP/599-00000f4b", "Calling Out Route: 6411000") in new stack -- Executing Set("SIP/599-00000f4b", "MOHCLASS=default") in new stack -- Executing Set("SIP/599-00000f4b", "_NODEST=") in new stack -- Executing Macro("SIP/599-00000f4b", "record-enable|599|OUT|") in new stack -- Executing GotoIf("SIP/599-00000f4b", "1?check") in new stack -- Goto (macro-record-enable,s,4) -- Executing AGI("SIP/599-00000f4b", "recordingcheck|20110420-002905|1303277345.3940") in newstack -- Launched AGI Script /var/lib/asterisk/agi-bin/recordingcheck recordingcheck|20110420-002905|1303277345.3940: Outbound recording not enabled -- AGI Script recordingcheck completed, returning 0 -- Executing MacroExit("SIP/599-00000f4b", "") in new stack -- Executing Macro("SIP/599-00000f4b", "dialout-trunk|2|4335476|") in new stack

5 / 12


-- Executing Set("SIP/599-00000f4b", "DIAL_TRUNK=2") in new stack -- Executing GosubIf("SIP/599-00000f4b", "0?sub-pincheck|s|1") in new stack -- Executing GotoIf("SIP/599-00000f4b", "0?disabletrunk|1") in new stack -- Executing Set("SIP/599-00000f4b", "DIAL_NUMBER=4335476") in new stack -- Executing Set("SIP/599-00000f4b", "DIAL_TRUNK_OPTIONS=trWw") in new stack -- Executing Set("SIP/599-00000f4b", "OUTBOUND_GROUP=OUT_2") in new stack -- Executing GotoIf("SIP/599-00000f4b", "1?nomax") in new stack -- Goto (macro-dialout-trunk,s,9) -- Executing GotoIf("SIP/599-00000f4b", "0?skipoutcid") in new stack -- Executing Set("SIP/599-00000f4b", "DIAL_TRUNK_OPTIONS=") in new stack -- Executing Macro("SIP/599-00000f4b", "outbound-callerid|2") in new stack -- Executing ExecIf("SIP/599-00000f4b", "0|SetCallerPres|") in new stack -- Executing ExecIf("SIP/599-00000f4b", "0|Set|REALCALLERIDNUM=599") in new stack -- Executing GotoIf("SIP/599-00000f4b", "1?normcid") in new stack -- Goto (macro-outbound-callerid,s,6) -- Executing Set("SIP/599-00000f4b", "USEROUTCID=") in new stack -- Executing Set("SIP/599-00000f4b", "EMERGENCYCID=") in new stack -- Executing Set("SIP/599-00000f4b", "TRUNKOUTCID=") in new stack -- Executing GotoIf("SIP/599-00000f4b", "1?trunkcid") in new stack -- Goto (macro-outbound-callerid,s,12) -- Executing ExecIf("SIP/599-00000f4b", "0|Set|CALLERID(all)=") in new stack -- Executing ExecIf("SIP/599-00000f4b", "0|Set|CALLERID(all)=") in new stack -- Executing ExecIf("SIP/599-00000f4b", "0|Set|CALLERID(all)=") in new stack -- Executing ExecIf("SIP/599-00000f4b", "0|SetCallerPres|prohib_passed_screen") in new stack -- Executing GosubIf("SIP/599-00000f4b", "0?sub-flp-2|s|1") in new stack -- Executing Set("SIP/599-00000f4b", "OUTNUM=4335476") in new stack -- Executing Set("SIP/599-00000f4b", "custom=SIP/6411000") in new stack -- Executing ExecIf("SIP/599-00000f4b", "0|Set|DIAL_TRUNK_OPTIONS=M(setmusic^default)") innew stack -- Executing Macro("SIP/599-00000f4b", "dialout-trunk-predial-hook|") in new stack -- Executing MacroExit("SIP/599-00000f4b", "") in new stack -- Executing GotoIf("SIP/599-00000f4b", "0?bypass|1") in new stack -- Executing GotoIf("SIP/599-00000f4b", "0?customtrunk") in new stack -- Executing Dial("SIP/599-00000f4b", "SIP/6411000/4335476|300|") in new stack -- Called 6411000/4335476 -- Got SIP response 486 "Busy Here" back from 10.0.1.129 -- SIP/6411000-00000f4c is busy == Everyone is busy/congested at this time (1:1/0/0) -- Executing NoOp("SIP/599-00000f4b", "Dial failed for some reason with DIALSTATUS = BUSY andHANGUPCAUSE = 17") in new stack -- Executing Goto("SIP/599-00000f4b", "s-BUSY|1") in new stack -- Goto (macro-dialout-trunk,s-BUSY,1) -- Executing NoOp("SIP/599-00000f4b", "Dial failed due to trunk reporting BUSY - giving up") in newstack -- Executing PlayTones("SIP/599-00000f4b", "busy") in new stack -- Executing Busy("SIP/599-00000f4b", "20") in new stack == Spawn extension (macro-dialout-trunk, s-BUSY, 3) exited non-zero on 'SIP/599-00000f4b' in macro'dialout-trunk' == Spawn extension (from-internal, 4335476, 6) exited non-zero on 'SIP/599-00000f4b' -- Executing Macro("SIP/599-00000f4b", "hangupcall|") in new stack -- Executing GotoIf("SIP/599-00000f4b", "1?noautomon") in new stack -- Goto (macro-hangupcall,s,3)

6 / 12


-- Executing NoOp("SIP/599-00000f4b", "TOUCH_MONITOR_OUTPUT=") in new stack -- Executing GotoIf("SIP/599-00000f4b", "1?skipblkvm") in new stack -- Goto (macro-hangupcall,s,7) -- Executing GotoIf("SIP/599-00000f4b", "1?theend") in new stack -- Goto (macro-hangupcall,s,9) -- Executing Hangup("SIP/599-00000f4b", "") in new stack == Spawn extension (macro-hangupcall, s, 9) exited non-zero on 'SIP/599-00000f4b' in macro'hangupcall' == Spawn extension (macro-dialout-trunk, h, 1) exited non-zero on 'SIP/599-00000f4b' elastix*CLI>

Por favor espero me puedan ayudar a solucionar este problema.

Saludos

JF

============================================================================


Según veo, sí hay forma de cambiar el mensaje, ahora has una llamada cuando la troncal no estédisponible, para vre si el hangupcause es diferente al que se setea cuadno el número es equivocado.

============================================================================


Este es el CLI cuando la troncal no esta disponible tal cual como me solicitasta que hiciera.

LLAMADA CUANDO LA TRONCAL NO ES DISPONIBLE

# asterisk -r Asterisk 1.4.36, Copyright (C) 1999 - 2010 Digium, Inc. and others. Created by Mark Spencer Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details. This is free software, with components licensed under the GNU General Public License version 2 and other licenses; you are welcome to redistribute it under certain conditions. Type 'core show license' for details. ========================================================================= Connected to Asterisk 1.4.36 currently running on elastix (pid = 2996) Verbosity is at least 3 -- Executing Macro("SIP/599-00001499", "user-callerid|SKIPTTL|") in new stack -- Executing Set("SIP/599-00001499", "AMPUSER=599") in new stack -- Executing GotoIf("SIP/599-00001499", "0?report") in new stack -- Executing ExecIf("SIP/599-00001499", "1|Set|REALCALLERIDNUM=599") in new stack -- Executing Set("SIP/599-00001499", "AMPUSER=599") in new stack

7 / 12


-- Executing Set("SIP/599-00001499", "AMPUSERCIDNAME=599") in new stack -- Executing GotoIf("SIP/599-00001499", "0?report") in new stack -- Executing Set("SIP/599-00001499", "AMPUSERCID=599") in new stack -- Executing Set("SIP/599-00001499", "CALLERID(all)="599" ") in new stack -- Executing ExecIf("SIP/599-00001499", "0|Set|CHANNEL(language)=") in new stack -- Executing GotoIf("SIP/599-00001499", "1?continue") in new stack -- Goto (macro-user-callerid,s,19) -- Executing NoOp("SIP/599-00001499", "Using CallerID "599" ") in new stack -- Executing NoOp("SIP/599-00001499", "Calling Out Route: 6411000") in new stack -- Executing Set("SIP/599-00001499", "MOHCLASS=default") in new stack -- Executing Set("SIP/599-00001499", "_NODEST=") in new stack -- Executing Macro("SIP/599-00001499", "record-enable|599|OUT|") in new stack -- Executing GotoIf("SIP/599-00001499", "1?check") in new stack -- Goto (macro-record-enable,s,4) -- Executing AGI("SIP/599-00001499", "recordingcheck|20110420-215406|1303354446.5300") innew stack -- Launched AGI Script /var/lib/asterisk/agi-bin/recordingcheck recordingcheck|20110420-215406|1303354446.5300: Outbound recording not enabled -- AGI Script recordingcheck completed, returning 0 -- Executing MacroExit("SIP/599-00001499", "") in new stack -- Executing Macro("SIP/599-00001499", "outisbusy|") in new stack -- Executing Progress("SIP/599-00001499", "") in new stack -- Executing GotoIf("SIP/599-00001499", "0?emergency|1") in new stack -- Executing GotoIf("SIP/599-00001499", "0?intracompany|1") in new stack -- Executing Playback("SIP/599-00001499", "all-circuits-busy-now&pls-try-call-later| noanswer") innew stack -- Playing 'all-circuits-busy-now' (language 'es') -- Playing 'pls-try-call-later' (language 'es') -- Executing Congestion("SIP/599-00001499", "20") in new stack == Spawn extension (macro-outisbusy, s, 5) exited non-zero on 'SIP/599-00001499' in macro'outisbusy' == Spawn extension (from-internal, 4335476, 6) exited non-zero on 'SIP/599-00001499' -- Executing Macro("SIP/599-00001499", "hangupcall") in new stack -- Executing GotoIf("SIP/599-00001499", "1?noautomon") in new stack -- Goto (macro-hangupcall,s,3) -- Executing NoOp("SIP/599-00001499", "TOUCH_MONITOR_OUTPUT=") in new stack -- Executing GotoIf("SIP/599-00001499", "1?skipblkvm") in new stack -- Goto (macro-hangupcall,s,7) -- Executing GotoIf("SIP/599-00001499", "1?theend") in new stack -- Goto (macro-hangupcall,s,9) -- Executing Hangup("SIP/599-00001499", "") in new stack == Spawn extension (macro-hangupcall, s, 9) exited non-zero on 'SIP/599-00001499' in macro'hangupcall' == Spawn extension (from-internal, h, 1) exited non-zero on 'SIP/599-00001499' De antemano gracias por su ayuda.

JF

============================================================================

8 / 12



Lo que yo haría es pegar el siguiente contexto en extensions_override_freepbx.conf:

include => macro-outisbusy-custom exten => s,1,Progress exten => s,n,GotoIf($?emergency,1) exten => s,n,GotoIf($?intracompany,1) exten => s,n,GotoIf($?invalid) exten => s,n,Playback(all-circuits-busy-now&pls-try-call-later, noanswer) exten => s,n,Congestion(20) exten => s,n,Hangup exten => s,n(invalid),Playback(invalid) exten => s,n,Congestion(20) exten => s,n,Hangup exten => intracompany,1,Playback(all-circuits-busy-now&pls-try-call-later, noanswer) exten => intracompany,n,Congestion(20) exten => intracompany,n,Hangup exten => emergency,1,Playback(all-circuits-busy-now&pls-try-call-later) exten => emergency,n,Congestion(20) exten => emergency,n,Hangup

Luego desde la consola ejecutas: asterisk -rx "module reload"

============================================================================


Ok, lo probare y te estare comentando. ¿otra cosa tu no sabes como cancelar el retorno de eco desangoma U100 FXO-USB? me puedes regalar tu msn?.

Saludos,

JF

============================================================================


Hola, coloque el codigo que me indicaste, y marque a un numero que se encuentra dañado y sigue

9 / 12


respondiendo igual, a continuación el CLI:

Extension Changed 146 new state InUse for Notify User 101 -- Executing Macro("SIP/146-00000275", "user-callerid|SKIPTTL|") in new stack -- Executing Set("SIP/146-00000275", "AMPUSER=146") in new stack -- Executing GotoIf("SIP/146-00000275", "0?report") in new stack -- Executing ExecIf("SIP/146-00000275", "1|Set|REALCALLERIDNUM=146") in new stack -- Executing Set("SIP/146-00000275", "AMPUSER=146") in new stack -- Executing Set("SIP/146-00000275", "AMPUSERCIDNAME=Sistemas") in new stack -- Executing GotoIf("SIP/146-00000275", "0?report") in new stack -- Executing Set("SIP/146-00000275", "AMPUSERCID=146") in new stack -- Executing Set("SIP/146-00000275", "CALLERID(all)="Sistemas" ") in new stack -- Executing ExecIf("SIP/146-00000275", "1|Set|CHANNEL(language)=es") in new stack -- Executing GotoIf("SIP/146-00000275", "1?continue") in new stack -- Goto (macro-user-callerid,s,19) -- Executing NoOp("SIP/146-00000275", "Using CallerID "Sistemas" ") in new stack -- Executing Set("SIP/146-00000275", "_NODEST=") in new stack -- Executing Macro("SIP/146-00000275", "record-enable|146|OUT|") in new stack -- Executing GotoIf("SIP/146-00000275", "1?check") in new stack -- Goto (macro-record-enable,s,4) -- Executing AGI("SIP/146-00000275", "recordingcheck|20110730-122609|1312046769.652") in newstack -- Launched AGI Script /var/lib/asterisk/agi-bin/recordingcheck recordingcheck|20110730-122609|1312046769.652: Outbound recording not enabled -- AGI Script recordingcheck completed, returning 0 -- Executing MacroExit("SIP/146-00000275", "") in new stack -- Executing Macro("SIP/146-00000275", "dialout-trunk|2|4335476||") in new stack -- Executing Set("SIP/146-00000275", "DIAL_TRUNK=2") in new stack -- Executing GosubIf("SIP/146-00000275", "0?sub-pincheck|s|1") in new stack -- Executing GotoIf("SIP/146-00000275", "0?disabletrunk|1") in new stack -- Executing Set("SIP/146-00000275", "DIAL_NUMBER=4335476") in new stack -- Executing Set("SIP/146-00000275", "DIAL_TRUNK_OPTIONS=TtrWw") in new stack -- Executing Set("SIP/146-00000275", "OUTBOUND_GROUP=OUT_2") in new stack -- Executing GotoIf("SIP/146-00000275", "1?nomax") in new stack -- Goto (macro-dialout-trunk,s,9) -- Executing GotoIf("SIP/146-00000275", "0?skipoutcid") in new stack -- Executing Set("SIP/146-00000275", "DIAL_TRUNK_OPTIONS=") in new stack -- Executing Macro("SIP/146-00000275", "outbound-callerid|2") in new stack -- Executing ExecIf("SIP/146-00000275", "0|SetCallerPres|") in new stack -- Executing ExecIf("SIP/146-00000275", "0|Set|REALCALLERIDNUM=146") in new stack -- Executing GotoIf("SIP/146-00000275", "1?normcid") in new stack -- Goto (macro-outbound-callerid,s,6) -- Executing Set("SIP/146-00000275", "USEROUTCID=") in new stack -- Executing Set("SIP/146-00000275", "EMERGENCYCID=") in new stack -- Executing Set("SIP/146-00000275", "TRUNKOUTCID=") in new stack -- Executing GotoIf("SIP/146-00000275", "1?trunkcid") in new stack -- Goto (macro-outbound-callerid,s,12) -- Executing ExecIf("SIP/146-00000275", "0|Set|CALLERID(all)=") in new stack -- Executing ExecIf("SIP/146-00000275", "0|Set|CALLERID(all)=") in new stack -- Executing ExecIf("SIP/146-00000275", "0|SetCallerPres|prohib_passed_screen") in new stack -- Executing ExecIf("SIP/146-00000275", "0|AGI|fixlocalprefix") in new stack -- Executing Set("SIP/146-00000275", "OUTNUM=4335476") in new stack

10 / 12


-- Executing Set("SIP/146-00000275", "custom=SIP/6410633") in new stack -- Executing ExecIf("SIP/146-00000275", "0|Set|DIAL_TRUNK_OPTIONS=M(setmusic^)") in newstack -- Executing Macro("SIP/146-00000275", "dialout-trunk-predial-hook|") in new stack -- Executing MacroExit("SIP/146-00000275", "") in new stack -- Executing GotoIf("SIP/146-00000275", "0?bypass|1") in new stack -- Executing GotoIf("SIP/146-00000275", "0?customtrunk") in new stack -- Executing Dial("SIP/146-00000275", "SIP/6410633/4335476|300|") in new stack -- Called 6410633/4335476 -- SIP/6410633-00000276 is circuit-busy == Everyone is busy/congested at this time (1:0/1/0) -- Executing Goto("SIP/146-00000275", "s-CONGESTION|1") in new stack -- Goto (macro-dialout-trunk,s-CONGESTION,1) -- Executing GotoIf("SIP/146-00000275", "1?noreport") in new stack -- Goto (macro-dialout-trunk,s-CONGESTION,3) -- Executing NoOp("SIP/146-00000275", "TRUNK Dial failed due to CONGESTION - failing throughto other trunks") in new stack -- Executing Macro("SIP/146-00000275", "outisbusy|") in new stack -- Executing Progress("SIP/146-00000275", "") in new stack -- Executing GotoIf("SIP/146-00000275", "0?emergency|1") in new stack -- Executing GotoIf("SIP/146-00000275", "0?intracompany|1") in new stack -- Executing GotoIf("SIP/146-00000275", "0?invalid") in new stack -- Executing Playback("SIP/146-00000275", "all-circuits-busy-now&pls-try-call-later| noanswer") innew stack -- Playing 'all-circuits-busy-now' (language 'es') -- Playing 'pls-try-call-later' (language 'es') Extension Changed 149 new state Idle for Notify User 101 == Spawn extension (macro-dial, s, 7) exited non-zero on 'SIP/149-00000273' in macro 'dial' == Spawn extension (ext, 131, 16) exited non-zero on 'SIP/149-00000273' Extension Changed 131 new state InUse for Notify User 101 -- Executing Macro("SIP/149-00000273", "hangupcall") in new stack -- Executing GotoIf("SIP/149-00000273", "1?noautomon") in new stack -- Goto (macro-hangupcall,s,3) -- Executing NoOp("SIP/149-00000273", "TOUCH_MONITOR_OUTPUT=") in new stack -- Executing GotoIf("SIP/149-00000273", "1?noautomon2") in new stack -- Goto (macro-hangupcall,s,6) -- Executing NoOp("SIP/149-00000273", "MONITOR_FILENAME=") in new stack -- Executing GotoIf("SIP/149-00000273", "1?theend") in new stack -- Goto (macro-hangupcall,s,9) -- Executing Hangup("SIP/149-00000273", "") in new stack == Spawn extension (macro-hangupcall, s, 9) exited non-zero on 'SIP/149-00000273' in macro'hangupcall' == Spawn extension (macro-dial, h, 1) exited non-zero on 'SIP/149-00000273'

Agradezco tu ayuda. JF

============================================================================


11 / 12


Ahora se me presenta otro problema adicional, instale la version del elastis 2.2.0.rc1.

A veces se me presenta el problema en la salida de llamadas ( situación que ya paso el lunes y el diade ayer en la tarde y nuevamente hoy) puesto que cuando se va a llamar o suena ocupado, o elmensaje de todas las líneas están ocupadas, se revisa las llamadas realizándolas de una línea análogao de un celular externo y funciona ok.

Esto se soluciona realizando el servidor y los ATA FXS Linksys.

Saludos,

JF

============================================================================

12 / 12

Documents

Lineas Ocupadas Elastix