Upload
leminh
View
255
Download
4
Embed Size (px)
Citation preview
lindab | we simplify construction
Lindab building solutionsfor gymnasiums and sports hallsFunctional and technical guide for builders, investors, designers
www.lindab.hu/csarnok
FUNCTION
Halls for sports activities and gymnasiums
Buildings or objects are always realized to serve some purpose or to satisfy certain functions. Therefore it is worth to sum up, in general, the most important factors that influence the final design of a building (without a claim for completeness):
builders’ needs: function, aesthetics, expected lifetime, construction and operating (maintenance) costs
requirements of competent authorities (on EU, national or local levels), eg: town planning or town development aspects
technical requirements (construction legislation, regulations, standards, etc.)
available construction material, construction products and processes local aspects relating to the work site and to the execution of the
construction works (eg. soil conditions, weather or environmental impacts, execution processes, and time- and machinery needs, etc.)
The numerous conditions listed above contain both mandatory and more flexible aspects – even contradictory ones in certain cases – therefore, the technical specifitactions should be specified individually that can meet all the requirements at some expected level (even if at the cost of comprosies) and which become finally interpreted as ensuring a match with this wide-ranging conditions system. It is therefore has high importance that the economic construction of each building at the required technical quality level must take place on the
basis of an individual de-sign.
Among the requirements set out for buildings serving the purpose of sports and physical exercise, the most important one is a compliance with the given function. In the de-sign of school gym halls
or sports halls, the primary aspect is to provide the required space or proper dimensions for the purpose of sports or physical excerise. The dimensions needed for physical education at school are set out by applicable standards; the official dimensions of sports-ground or play-fields are also regulated in function of the given branch of sport, which sets the basis for specifying the required hall dimensions. Due to these requirements, these buildings are typically hall structures with large span and clear height. A sports hall must or can be supplemented by various service spaces (eg. store rooms, changing rooms, bathrooms, offices, conference rooms, etc.) specified partly by mandatory normative specifications and partly by individual builder needs.
TECHNICAL POSSIBILITIES
Lindab lightweight construction solutions
For the construction of gym halls and sports halls with confined spaces, excellent solutions are offered by Lindab’s lightweight steel structure construction products and the systems, subsystems that can be created by using these products.
The following are the main subsystems of Lindab’s lightweight hall structures: Primary framing structure in steel Secondary framing structures Roof- and wall-cladding systems Supplementary systems, accessories
The primary framing structure of Lindab halls is a spatial framework made from linearly sequenced planar frames and bracing systems. Three main frame types are available: solid-section frames are hot rolled, welded I-profile frames of variable cross-sections, and main lattice girder structures. Numerous further variants of these main types are possible, depending on further installations such as side-aisles, intermediate storey(s), crane-runway(s), etc. A tailor-made solution in conformity with builders’ needs (functional, aesthetics) and the technical requirements is realized in each case through individual design, that produces the required large dimensions (span, clear height), as well as the relevant optimised material consumption and, through this, economy. The surface protection solutions for the structural elements of main frames must be specified with view to needs and available options, which might be multi-layer painting or hot-dip galvanizing.
Upon the primary framing structure of halls, the so-called secondary load-bearing system is installed, which directly supports the roof- and wall sheeting and which transfers loads to the primary framing. Most frequently the secondary load-bearing system is constructed by using the optimized lightweight profiles of the Lindab Construline product family (linearly distributed load-bearing roof purlin- and wall-stud systems), ensuring excellent load-bearing capacities through high strength, and a long-lasting corrosion-resistance through the hot-dip galvanisation surface protection. The secondary framing can be realized by using Lindab Coverline structural elements too, using high-profile trapezoidal sheeting on roofs and structural wall-cassette products on walls.
The Sweden-based Lindab Group operates in the field of developing, manufacturing and selling of products and system solutions in steel for simplified construction. Since its foundation in 1959, Lindab has become continuously developing, determinant market player with enormous experience. The Hungarian daughter company, Lindab Kft. has been present in Hungary already for 20 years, operating by its own significant production capacity and excellent results. In this market segment, Lindab has got the widest and most complex product range (roof- and wall cladding products and systems, supporter elements, complete building structures and supplementary systems: rainwater system, roof safety systems, etc.) representing optimum solutions for residential buildings or industrial halls, new projects or renovations as well.
Lindab building solutions for gymnasiums and sport halls
The Lindab Coverline profiled sheeting products available with several coating types and in numberless colours provide safe and watertight roofing, and durable and aesthetical wall cladding not only for the gym hall itself but also for the service building block. This group of products offers several architectural solutions for the design of the external cladding: simple, lined-looking trapezoidal profiles in a range
of dimensions, and also with “design” pat-terns available option-ally; elegant sinusoidal profiles; facade wall-cassettes providing a strongly marked rec-tangular pattern (ECO and Premium types); or even standing seam sheetings (SRP, PLX)
are available. The sandwich panels of various types (all with steel sheet-ing at both sides with a thermal-insulation core in between) allow for a quick, thermally insulated cladding of large surfaces.
It is of high importance that besides its main framing and sheeting components, Lindab offers a wide range of accessories system
as well: the Rainline roof drainage system, the Protectline system for roof safety (snow fences, roof walkways, roof- and wall-ladders), roof ventilation elements, roof foils, self-drilling screws, sealing profiles ensure a perfect design for the tiniest details.
It is important to note here, that the products and technical solutions enumerated above allow for a highly free and flexible design. In certain cases, the wall structures of complete hall buildings can be realized by using Lindab components and solutions (steel framework structure, roof- and wall-cladding, roof drainage products and the relevant accessories), while in other cases Lindab products can be flexibly combined with structures made from other materials (eg. prefabricated reinforced concrete framings combined with Lindab lightweight roof- and wall-claddings) in order to ensure the best and most economic realization of works.
Professional support
In addition to the developing and manufacturing of excellent quality products, from the very beginning Lindab has attached importance to being able to provide professional and technical support to companies and persons playing a role in the construction process, at the highest possible level and in the highest number of fields all through the design and installation of its products. The quickest way to have access to general information is to use our web site (www.lindab.hu), while deatiled professional information is available at the Lindab Designer Portal that can be accessed via the website. In the following sections, we provide a short summary of the services Lindab provides, broken down to target groups:
Builders, investors: a collection of references, professional consultation, putting up designer- and contractor-contacts, preparing preliminary quotations free of charge (in accordance with the level the technical specifications have been elaborated to)
Designers: design-er guides, technical guides for applica-tions, design soft-wares, professional consultation
Contractor: short lead times and flexibil-ity due to local produc-tion, excellent logistics, minimum amounts of construction wastes due to a manufacture with accurate dimen-sions, safe packaging, professional consulta-tion.
Lindab building solutions for gymnasiums and sport halls
Advantages offered by Lindab products and systems - for all participants high-strength steel raw material – high load-bearing capacity,
spanning over large spans hot-dip galvanization for surface protection – excellent corrosion
protection, hardwearing quality recyclable steel materials – environmentally friendly products a wide range of profiles and colours for cladding components -
aesthetical appearance, at a variety of levels light weight – small loads to foundations, low transporation
costs, fast realization
mounted, installed, dry technology – fast construction works, short realization times, faster return of investment
accurate manufacture dimensions – low amounts of wastes on site
complete system (framings, roof- and wall-cladding, roof drainage, roof safety, accessories)
variable system components – flexible, variable applications outstanding services (for designers, contractors and
builders)
SERVICES
Modell hall no. 1 presents an example for halls serving the function of school sports and leisure activities to the minimum level. This 15-m wide and 30-m long sports hall of 450 m2, with a high roof pitch suitable to hold gym lesson of elementary schools or secondary educational institutions operating with not more than eight classes (according to the provisions of former Hungarian standards, the MSZ 24203 series); further, it is suited to accommodate a volleyball- and tennis-court in official tournament dimensions. Of course, for the purpose of mass sports and leisure activities, the hall can accomodate handball-, basketball- and indoor footbal courts as well, whose dimensions are less than the official requirements.At the gable end of the hall building, a service block of minimum floor area (60 m2) is attached to the building, accomodating an entrance for persons, as well as few indispensable rooms (store room, locker room for a couple of people).
SPECTACULAR DRAWINGSGYM HALL DIMENSIONS
Width (m) 15.0
Length (m) 30.0
Height of the eaves (m) 8.0
Roof pitch (°/%) 20°
Floor area 450.0
OFFICIAL COURT DIMENSIONS THE HALL CAN ACCOMMODATE
volleyball (9x18m) – 1 court
tennis (10,97x23,77m) – 1 court
HALL BUILDING STRUCTURE
Primary framingSteel framing structure, made from profiles produced by hot roll forming
Secondary framingLindab Construline steel purlin- and wall-stud system
Roof cladding
Thermal-insulated mounted sandwhich structure (Lindab tile-effect roofing, roof foil, thermal insulation, vapour-barrier, trapezoidal sheets)
Wall cladding
Thermal-insulated mounted sandwich structure (Lindab trapezoidal profiles, thermal insulation, vapour-barrier, trapezoidal sheets)
Roof drainageLindab Rainline rainwater system
SERVICE BUILDING BLOCK ATTACHED TO THE HALL (OPTIONAL)
Place of attachment at gable end
Width (m) 10.0
Length (m) 6.0
Height of the eaves (m) 3.0
Roof pitch (°/%) 20°
Floor area 60.0
FUNCTIONALITY OPTIONS FOR THE SERVICE SPACES
Windbreak room, entrance space
Store room, storage space
Changing rooms, lockers
Model hall no. 1
Please note: The model halls, buildings we present here are intended for inspiration, which can be used as starting point for the builders’ own designs, as an aid
-0,20
+0,80+1,30
+2,20
6 000 500 30 00015 000
6 00050030 000 15 000
+2,80
-0,20
+2,20
+1,30
+2,20
-0,20
+0,80
-0,20
+0,80
±0,00
+4,00
+5,80
+1,30
+2,20
+4,00
+5,80
-0,20
+3,00+4,00
+5,80
15 000
+0,80
+3,00 +3,00
+0,80 +0,80
20,00°
20,00°
Projekt neve: Rajz neve:
Készítette:
Ellenőrizte:
Méretarány:
Dátum:
2051 Biatorbágy, Állomás u. 1/aTel.: 06-23/531-100Fax.: 06-23/310-703Adószám: 10539260-2-13
Rajzszáma:
Referenciaszám:
Megrendelő:
–
2012. november
LINDAB TORNACSARNOKMINTAÉPÜLET 1.
Homlokzatok
FRONT FACADE
BACKSIDE FACADE
RIGHTSIDE FACADE
LEFTSIDE FACADE
1
4
23
5
1
4
23
5 5
4
2
2
4
3LVP 20 tarpezoid sheet, .................(...) szín, Classic bevonat
Lindab Rainline 150/100 ereszcsatorna, .................(...) szín, Elite bevonat
Vakolt lábazati fal, .................(...) szín
21
45
LPA Maxi tile effect sheet, .................(...) colour, Classic coated
Ablak szegélyezés, Lindab síklemez, .................(...) szín, Classic bevonat T-1/IV.
GROUND PLAN
SECTIONS
ELEVATION
450 m22
200
1501
500
1 50
01
500
1 50
085
0
anchoring level
floor level
eaves height
ridge height
8 00
0
15 000
7 981
500
1508811 070
1 0701 070
1 0701 070
1 070
1 030
±0,00
-1,40-0,20
±0,00
+0,80
+7,80
+10,53
20,00°
"LS" Euro section primary framing(according to static specifications)
brick footing foundations (according to static specifications)
Projekt neve: T-1/II.
2
1
1
2
Rajz neve:
Készítette:
Ellenőrizte:
Méretarány:
Dátum:
2051 Biatorbágy, Állomás u. 1/aTel.: 06-23/531-100Fax.: 06-23/310-703Adószám: 10539260-2-13
Rajzszáma:
Referenciaszám:
Megrendelő:
–
2012. november
LINDAB TORNACSARNOKMINTAÉPÜLET 1.
LVP 20 tarpezoid sheet"Z" purlin (Z120)12 cm heat insulation between*LPZ 110 vapour barrierLVP 20 tarpezoid sheetsteel frame structure
3 3
A-A metszet
2-3 cm sport flloring8-10 cm floor slabPE technological membrane8-10 cm step-proof heat insulationdamp-proof membrane15-20 reinforced concrete flooring25-30 cm gravel filloriginal soil
*according to therno-technical specificationsexternal dimensions of primary frame
exte
rnal
eav
es h
eigh
t of f
ram
e st
ruct
ure
LPA Maxi tile effect sheetLTF 180 breathable construction foil"Z" purlin (Z200)15 cm heat insulation between*LPZ 110 vapour barrierLVP 20 tarpezoid sheetsteel frame structure
2 20
015
01 50
01
500
1 50
01
500
850
anchoring level
floor level
eaves height
ridge height
8 00
0
15 000
7 981
500
1508811 070
1 0701 070
1 0701 070
1 070
1 030
±0,00
-1,40-0,20
±0,00
+0,80
+7,80
+10,53
20,00°
"LS" Euro section primary framing(according to static specifications)
brick footing foundations (according to static specifications)
Projekt neve: T-1/II.
2
1
1
2
Rajz neve:
Készítette:
Ellenőrizte:
Méretarány:
Dátum:
2051 Biatorbágy, Állomás u. 1/aTel.: 06-23/531-100Fax.: 06-23/310-703Adószám: 10539260-2-13
Rajzszáma:
Referenciaszám:
Megrendelő:
–
2012. november
LINDAB TORNACSARNOKMINTAÉPÜLET 1.
LVP 20 tarpezoid sheet"Z" purlin (Z120)12 cm heat insulation between*LPZ 110 vapour barrierLVP 20 tarpezoid sheetsteel frame structure
3 3
A-A metszet
2-3 cm sport flloring8-10 cm floor slabPE technological membrane8-10 cm step-proof heat insulationdamp-proof membrane15-20 reinforced concrete flooring25-30 cm gravel filloriginal soil
*according to therno-technical specificationsexternal dimensions of primary frame
exte
rnal
eav
es h
eigh
t of f
ram
e st
ruct
ure
LPA Maxi tile effect sheetLTF 180 breathable construction foil"Z" purlin (Z200)15 cm heat insulation between*LPZ 110 vapour barrierLVP 20 tarpezoid sheetsteel frame structure
2 20
015
01 50
01
500
1 50
01
500
850
anchoring level
floor level
eaves height
ridge height
8 00
0
15 000
7 981
500
1508811 070
1 0701 070
1 0701 070
1 070
1 030
±0,00
-1,40-0,20
±0,00
+0,80
+7,80
+10,53
20,00°
"LS" Euro section primary framing(according to static specifications)
brick footing foundations (according to static specifications)
Projekt neve: T-1/II.
2
1
1
2
Rajz neve:
Készítette:
Ellenőrizte:
Méretarány:
Dátum:
2051 Biatorbágy, Állomás u. 1/aTel.: 06-23/531-100Fax.: 06-23/310-703Adószám: 10539260-2-13
Rajzszáma:
Referenciaszám:
Megrendelő:
–
2012. november
LINDAB TORNACSARNOKMINTAÉPÜLET 1.
LVP 20 tarpezoid sheet"Z" purlin (Z120)12 cm heat insulation between*LPZ 110 vapour barrierLVP 20 tarpezoid sheetsteel frame structure
3 3
A-A metszet
2-3 cm sport flloring8-10 cm floor slabPE technological membrane8-10 cm step-proof heat insulationdamp-proof membrane15-20 reinforced concrete flooring25-30 cm gravel filloriginal soil
*according to therno-technical specificationsexternal dimensions of primary frame
exte
rnal
eav
es h
eigh
t of f
ram
e st
ruct
ure
LPA Maxi tile effect sheetLTF 180 breathable construction foil"Z" purlin (Z200)15 cm heat insulation between*LPZ 110 vapour barrierLVP 20 tarpezoid sheetsteel frame structure
Pm: 1 300
900
900
Pm: 1 30090
090
0
Pm
: 1 3
00
900900
Pm
: 1 3
00
900900
2 4002 400
2 4001 000
2 4001 000
Pm: 1 300
900
900
Pm: 1 300
900
900 Pm
: 4 0
00
4 0001 800
Pm: 4
000
4 0001 800
Pm: 4
000
4 0001 800 3 000
3 000
Pm: 4 000
4 00
01
800
Pm: 4 000
4 00
01
800
Pm: 4 000
4 00
01
800
Pm: 4 000
4 00
01
800
Pm: 4 000
4 00
01
800
Pm: 4 000
1 80
04
000
Pm: 4 000
1 80
04
000
Pm: 4 000
1 80
04
000
Pm: 4 000
1 80
04
000
Pm: 4 000
1 80
04
000
6 000 500 6 000 6 000 6 000 6 000 6 000
6 500 30 000
2 50
010
000
2 50
0
15 0
005
000
5 00
05
000
6 000 500 1 000 4 000 1 000 1 000 4 000 1 000 1 000 4 000 1 000 1 0004 000 1 000 1 000
4 000 1 000
longitudinal bracinglongitudinal bracing
longitudinal bracinglongitudinal bracing
I. IV. VI. VII.V. VIII.II. III.
AA
Projekt neve: Rajz neve:
Készítette:
Ellenőrizte:
Méretarány:
Dátum:
2051 Biatorbágy, Állomás u. 1/aTel.: 06-23/531-100Fax.: 06-23/310-703Adószám: 10539260-2-13
Rajzszáma:
Referenciaszám:
Megrendelő:
–
2012. november
T-1/I.AlaprajzLINDAB TORNACSARNOK
MINTAÉPÜLET 1.
B
A
SPORTS HALL450 m2
sports flooring
VOLLEYBALL
TENNIS
SERVICE BLOCK60 m2
ceramic
-0,20
±0,00
+0,80
+3,00
-0,20
±0,00
+0,80
+7,80
+10,53
±0,00
6 000 500 6 000 6 000 6 000 6 000 6 000
brick footing foundations (according to static specifications)
Projekt neve:B-B metszet
3
1
2
Rajz neve:
Készítette:
Ellenőrizte:
Méretarány:
Dátum:
2051 Biatorbágy, Állomás u. 1/aTel.: 06-23/531-100Fax.: 06-23/310-703Adószám: 10539260-2-13
Rajzszáma:
Referenciaszám:
Megrendelő:
–
2012. november
LINDAB TORNACSARNOKMINTAÉPÜLET 1.
T-1/III.
1
ORDER OF LAYERS:
2 3LVP 20 tarpezoid sheet"Z" purlin (Z120)12 cm heat insulation between*LPZ 110 vapour barrierLVP 20 tarpezoid sheetsteel frame structure
2-3 cm sport flloring8-10 cm floor slabPE technological membrane8-10 cm step-proof heat insulationdamp-proof membrane15-20 reinforced concrete flooring25-30 cm gravel filloriginal soil
*according to therno-technical specifications
LPA Maxi tile effect sheetLTF 180 breathable construction foil"Z" purlin (Z200)15 cm heat insulation between*LPZ 110 vapour barrierLVP 20 tarpezoid sheetsteel frame structure
2 20
015
01 50
01
500
1 50
01
500
850
anchoring level
floor level
eaves height
ridge height
8 00
0
15 000
7 981
500
1508811 070
1 0701 070
1 0701 070
1 070
1 030
±0,00
-1,40-0,20
±0,00
+0,80
+7,80
+10,53
20,00°
"LS" Euro section primary framing(according to static specifications)
brick footing foundations (according to static specifications)
Projekt neve: T-1/II.
2
1
1
2
Rajz neve:
Készítette:
Ellenőrizte:
Méretarány:
Dátum:
2051 Biatorbágy, Állomás u. 1/aTel.: 06-23/531-100Fax.: 06-23/310-703Adószám: 10539260-2-13
Rajzszáma:
Referenciaszám:
Megrendelő:
–
2012. november
LINDAB TORNACSARNOKMINTAÉPÜLET 1.
LVP 20 tarpezoid sheet"Z" purlin (Z120)12 cm heat insulation between*LPZ 110 vapour barrierLVP 20 tarpezoid sheetsteel frame structure
3 3
A-A metszet
2-3 cm sport flloring8-10 cm floor slabPE technological membrane8-10 cm step-proof heat insulationdamp-proof membrane15-20 reinforced concrete flooring25-30 cm gravel filloriginal soil
*according to therno-technical specificationsexternal dimensions of primary frame
exte
rnal
eav
es h
eigh
t of f
ram
e st
ruct
ure
LPA Maxi tile effect sheetLTF 180 breathable construction foil"Z" purlin (Z200)15 cm heat insulation between*LPZ 110 vapour barrierLVP 20 tarpezoid sheetsteel frame structure
Possible application: sports hall of elementary school with maximum eight classes, or secondary educational institution
-0,20
+0,80+1,30
+2,20
6 000 500 30 00015 000
6 00050030 000 15 000
+2,80
-0,20
+2,20
+1,30
+2,20
-0,20
+0,80
-0,20
+0,80
±0,00
+4,00
+5,80
+1,30
+2,20
+4,00
+5,80
-0,20
+3,00+4,00
+5,80
15 000
+0,80
+3,00 +3,00
+0,80 +0,80
20,00°
20,00°
Projekt neve: Rajz neve:
Készítette:
Ellenőrizte:
Méretarány:
Dátum:
2051 Biatorbágy, Állomás u. 1/aTel.: 06-23/531-100Fax.: 06-23/310-703Adószám: 10539260-2-13
Rajzszáma:
Referenciaszám:
Megrendelő:
–
2012. november
LINDAB TORNACSARNOKMINTAÉPÜLET 1.
Homlokzatok
FRONT FACADE
BACKSIDE FACADE
RIGHTSIDE FACADE
LEFTSIDE FACADE
1
4
23
5
1
4
23
5 5
4
2
2
4
3LVP 20 tarpezoid sheet, .................(...) szín, Classic bevonat
Lindab Rainline 150/100 ereszcsatorna, .................(...) szín, Elite bevonat
Vakolt lábazati fal, .................(...) szín
21
45
LPA Maxi tile effect sheet, .................(...) colour, Classic coated
Ablak szegélyezés, Lindab síklemez, .................(...) szín, Classic bevonat T-1/IV.
1. Lindab LPA Maxi tile effect sheet black (015) colour, Classic coating
2. Lindab LVP 20 trapezoidal sheet dark grey (087) colour, Classic coating
3. Lindab Rainline 150/100 rain gutter, white (001) colour, Elite coating
4. Plastered plinth wall, grey
5. Window flashing, Lindab sheet, white (001) colour, Classic coating
GYM HALL DIMENSIONS
Width (m) 30.0
Length (m) 30.0
Height of the eaves (m) 10.0
Roof pitch (°/%) 10%
Floor area 900.0
OFFICIAL COURT DIMENSIONS THE HALL CAN ACCOMMODATE
volleyball (9x18m) – 2 db
tennis (10,97x23,77m)– 2 db
basketball (15x28m)– 1 db
HALL BUILDING STRUCTURES
Primary framingSteel farming structure, variable cross section welded sections
Secondary framingLindab Construline steel purlin- and wall-stud system
Roof cladding Lindab sandwichpanel
Wall claddingLindab sandwichpanel (laid horizontally); 4m tall plinth wall beneath
Roof drainageLindab Rainline rainwater system
SERVICE BUILDING BLOCK ATTACHED TO THE HALL (OPTIONAL)
Place of attachment to hall at gable end
Width (m) 10.0
Length (m) 30.0
Height of eaves (m) 3.5
Roof pitch (°/%) 10%
Floor area 300.0
FUNCTIONALITY OPTIONS FOR THE SERVICE SPACE
Windbreak room, entrance space
Changing rooms, lockers
Store room, storage space
Toilet, shower
Model hall no. 2
Model hall no. 2 presents an example for halls serving the function of school sports and leisure adctivities in an average, comfortable way. This 30-m wide and 30-m long sports hall of 900 m2, with a gentle roof pitch and an eaves height of ~10m is suitable to hold gym lessons of elementary schools or secondary educational institutions operating with not more than sixteen classes, or even special needs education with up to eight classes (according to the provisions of former Hungarian standards, the MSZ 24203 series); further it is suited to accommodate volleyball-, tennis- and basketball-court. Of course, for the purpose of mass sports and leisure activities, the hall can accommodate handball- and indoor footbal-courts as well, whose dimensions are less than the official requirements. At the gable end of the hall building a single-storey, lean-to roofed social block with a floor area of ~300 m2 is attached to the building, that serves the social functions adequatelly. It is accommodating rooms for storage of sport equipment and also spaces for personal needs (locker room, bathroom, toilet).
SPECTACULAR DRAWINGS
Please note: The model halls, buildings we present here are intended for inspiration, which can be used as a starting point for the builders’ own designs, as an aid.
Pm: 4 000
3 00
01
500
Pm: 4 000
3 00
01
500
Pm: 4 000
3 00
01
500
Pm: 4 000
3 00
01
500
Pm: 4 000
3 00
01
500
Pm: 4 000
3 00
01
500
Pm: 4 000
3 00
01
500
Pm: 4 000
3 00
01
500
Pm: 4 000
3 00
01
500
Pm: 4 000
3 00
01
500
Pm: 4 000
3 00
01
500
Pm: 4 000
3 00
01
500
Pm: 4 000
3 00
01
500
Pm: 4 000
3 00
01
500
Pm: 4 0003
000
1 50
0Pm: 4 000
3 00
01
500
Pm: 4 000
3 00
01
500
Pm: 4 000
3 00
01
500
Pm: 4
00 0
1 5003 000
Pm: 4
00 0
1 5003 000
Pm: 4
00 0
1 5003 000
Pm: 4
00 0
1 5003 000
Pm: 4
00 0
1 5003 000
Pm: 4
00 0
1 5003 000
Pm: 4
00 0
1 5003 000
Pm: 4
00 0
1 5003 000
Pm: 4
00 0
1 5003 000
Pm: 4
00 0
1 5003 000
Pm: 4
00 0
1 5003 000
Pm: 4
00 0
1 5003 000
Pm: 4
00 0
1 5003 000
Pm: 4
00 0
1 5003 000
Pm: 4
00 0
1 5003 000 3 000
3 000
Pm: 4 000
1 50
03
000
Pm: 4 000
1 50
03
000
Pm: 4 000
1 50
03
000
Pm: 4 000
1 50
03
000
Pm: 4 000
1 50
03
000
Pm: 4 000
1 50
03
000
Pm: 4 000
1 50
03
000
Pm: 4 000
1 50
03
000
Pm: 4 000
1 50
03
000
Pm: 4 000
1 50
03
000
Pm: 4 000
1 50
03
000
Pm: 4 000
1 50
03
000
Pm: 4 000
1 50
03
000
Pm: 4 000
1 50
03
000
Pm: 4 000
1 50
03
000
Pm: 900
1 50
01
200
Pm: 900
1 50
01
200
Pm: 900
1 50
01
200
1 00
02
400
Pm: 900
1 20
01
500
Pm: 900
1 20
01
500
Pm: 900
1 20
01
500
Pm: 900
1 20
01
500
Pm: 9
00
1 5001 200
Pm: 9
00
1 5001 200
Pm: 9
00
1 5001 200
Pm: 9
00
1 5001 200
Pm: 9
00
1 5001 200
Pm: 9
00
1 5001 200
Pm: 9
00
1 5001 200
Pm: 9
00
1 5001 200
Pm: 9
00
1 5001 200
Pm: 9
001 5001 200
Pm: 9
00
1 5001 200
Pm: 9
00
1 5001 200
2 4002 400
2 4001 000
2 4001 000
10 000 500 30 000
30 0
00
6 00
06
000
6 00
06
000
6 00
0
5 000 5 000 500 6 000 6 000 6 000 6 000 6 000
30 0
00
6 00
06
000
6 00
06
000
6 00
0
5 000 5 000 500 750 1 500 1 500 1 500750 750
1 500 1 500 1 500750 750
1 500 1 500 1 500750 750
1 500 1 500 1 500750 750
1 500 1 500 1 500 750
longitudinal bracing
longitudinal bracing
longitudinal bracing
longitudinal bracing
Projekt neve:
LINDAB TORNACSARNOKMINTAÉPÜLET 2.
T-2/I.Alaprajz
BASKETBALL
Rajz neve:
Készítette:
Ellenőrizte:
Méretarány:
Dátum:
2051 Biatorbágy, Állomás u. 1/aTel.: 06-23/531-100Fax.: 06-23/310-703Adószám: 10539260-2-13
Rajzszáma:
Referenciaszám:
Megrendelő:
–
2012. november
SPORTS HALL900 m2
sports flooring
VI. VII.V. VIII.
AA
I. II.
SERVICE BLOCK300 m2ceramic
IV.III. IX.
B
A
VOLLEYBALL
TENNIS
VOLLEYBALL
TENNIS
B B
6 0006 0006 0006 0006 000
+0,90
+2,40
-0,20
+9,80
+11,30
+12,64
+0,90
+2,40
+0,90
+2,40
6 0006 0006 0006 0006 000
-0,20
+9,80
+11,30
+12,64
6 0006 0006 0006 0006 0005005 0005 000
+12,64
+2,80
+4,00
+7,00
+4,00
+7,00
+4,00
+7,00
6 000 6 000 6 000 6 000 6 000 500 5 000 5 000
-0,20
+3,30
+4,33
+11,30
+12,64
LEFTSIDE FACADE
RIGHTSIDE FACADE
3Vakolt lábazati fal, .................(...) szín
21
45
Lindab tetőpanel .................(...) szín
BACKSIDE FACADE
FRONT FACADE
Projekt neve: Rajz neve:
Készítette:
Ellenőrizte:
Méretarány:
Dátum:
2051 Biatorbágy, Állomás u. 1/aTel.: 06-23/531-100Fax.: 06-23/310-703Adószám: 10539260-2-13
Rajzszáma:
Referenciaszám:
Megrendelő:
–
2012. november
HomlokzatokLINDAB TORNACSARNOK
MINTAÉPÜLET 2.
2
1
4
3
2
Lindab PLX korcolt lemezfedés, .................(...) szín, Elite bevonat
31
2
2
Lindab falpanel.................(...) szín
Lindab Rainline 190/120 ereszcsatorna, .................(...) szín, Elite bevonat
4
4
55
6
5
Ablak szegélyezés, Lindab síklemez, .................(...) szín, Classic bevonat
67
Vakolt téglafalazat, .................(...) szín
T-2/IV.
7 7
7
±0,00
3 000
30 000
anchoring level
floor level
eaves height
ridge height
10 0
00
500 1 417 1 500 1 500 1 500 1 500 1 500 1 500 1 500 1 500 1 657
500
15 075
1 20
04
000
6 00
0
-1,40-0,20
±0,00
+3,80
+9,80
+11,30
+12,64
5,71° = 10 %
brick footing
"LH" welded "I" section frame with variable cross section(according to static specifications)
foundations (according to static specifications)
5
1
2
(external dimensions of primary frame)
LINDAB TORNACSARNOKMINTAÉPÜLET 2.
T-2/II.Projekt neve: Rajz neve:
Készítette:
Ellenőrizte:
Méretarány:
Dátum:
2051 Biatorbágy, Állomás u. 1/aTel.: 06-23/531-100Fax.: 06-23/310-703Adószám: 10539260-2-13
Rajzszáma:
Referenciaszám:
Megrendelő:
–
2012. november
A-A metszet
(ext
erna
l eav
es h
eigh
t of f
ram
e st
ruct
ure)
1 5Lindab wall panel 100 mm (horizontal)steel frame structure
ORDER OF LAYERS:
Lindab roof panel 100 mm"Z" purlin (Z200)steel frame structure
2 2-3 cm sport flloring8-10 cm floor slabPE technological membrane8-10 cm step-proof heat insulationdamp-proof membrane15-20 reinforced concrete flooring25-30 cm gravel filloriginal soil
6 0006 0006 0006 0006 0005005 0005 000
±0,00 -0,20
+3,80
+11,30
+12,64
5,71° = 10 %
brick footing
foundations (according to static specifications)
5
B-B metszet T-2/III.LINDAB TORNACSARNOK
MINTAÉPÜLET 2.
Projekt neve: Rajz neve:
Készítette:
Ellenőrizte:
Méretarány:
Dátum:
2051 Biatorbágy, Állomás u. 1/aTel.: 06-23/531-100Fax.: 06-23/310-703Adószám: 10539260-2-13
Rajzszáma:
Referenciaszám:
Megrendelő:
–
2012. november
1
2
4
3
1 Lindab wall panel 100 mm (horizontal)steel frame structure
ORDER OF LAYERS:
Lindab roof panel 100 mm"Z" purlin (Z200)steel frame structure
2 3 Lindab PLX standing seam roofingwooden boarding (2,4 cm)5x5 cm counter batten every 1 m with ventilated air spaceLindab LTP 20 trapezoid cladding (2 cm)LTF 180 breathable construction foilLindab Z 200 purlin system20 cm mineral wool heat insulation betweenLPZ 110 vapour barriergypsum plasterboard supporting frame (2 cm)2 ply gypsum plasterboard cladding (2,5 cm)
4 interior plaster (1 cm)hollow block brick wall (38 cm)facade heat insulation system (5 cm)exterior plaster (1,5 cm)
5 2-3 cm sport flloring8-10 cm floor slabPE technological membrane8-10 cm step-proof heat insulationdamp-proof membrane15-20 reinforced concrete flooring25-30 cm gravel filloriginal soil
GROUND PLAN
SECTIONS
ELEVATION
900 m2Possible application: elementary and secondary schools with eight to sixteen classes and special needs education
6 0006 0006 0006 0006 0005005 0005 000
±0,00 -0,20
+3,80
+11,30
+12,64
5,71° = 10 %
brick footing
foundations (according to static specifications)
5
B-B metszet T-2/III.LINDAB TORNACSARNOK
MINTAÉPÜLET 2.
Projekt neve: Rajz neve:
Készítette:
Ellenőrizte:
Méretarány:
Dátum:
2051 Biatorbágy, Állomás u. 1/aTel.: 06-23/531-100Fax.: 06-23/310-703Adószám: 10539260-2-13
Rajzszáma:
Referenciaszám:
Megrendelő:
–
2012. november
1
2
4
3
1 Lindab wall panel 100 mm (horizontal)steel frame structure
ORDER OF LAYERS:
Lindab roof panel 100 mm"Z" purlin (Z200)steel frame structure
2 3 Lindab PLX standing seam roofingwooden boarding (2,4 cm)5x5 cm counter batten every 1 m with ventilated air spaceLindab LTP 20 trapezoid cladding (2 cm)LTF 180 breathable construction foilLindab Z 200 purlin system20 cm mineral wool heat insulation betweenLPZ 110 vapour barriergypsum plasterboard supporting frame (2 cm)2 ply gypsum plasterboard cladding (2,5 cm)
4 interior plaster (1 cm)hollow block brick wall (38 cm)facade heat insulation system (5 cm)exterior plaster (1,5 cm)
5 2-3 cm sport flloring8-10 cm floor slabPE technological membrane8-10 cm step-proof heat insulationdamp-proof membrane15-20 reinforced concrete flooring25-30 cm gravel filloriginal soil
6 0006 0006 0006 0006 000
+0,90
+2,40
-0,20
+9,80
+11,30
+12,64
+0,90
+2,40
+0,90
+2,40
6 0006 0006 0006 0006 000
-0,20
+9,80
+11,30
+12,64
6 0006 0006 0006 0006 0005005 0005 000
+12,64
+2,80
+4,00
+7,00
+4,00
+7,00
+4,00
+7,00
6 000 6 000 6 000 6 000 6 000 500 5 000 5 000
-0,20
+3,30
+4,33
+11,30
+12,64
LEFTSIDE FACADE
RIGHTSIDE FACADE
3Vakolt lábazati fal, .................(...) szín
21
45
Lindab tetőpanel .................(...) szín
BACKSIDE FACADE
FRONT FACADE
Projekt neve: Rajz neve:
Készítette:
Ellenőrizte:
Méretarány:
Dátum:
2051 Biatorbágy, Állomás u. 1/aTel.: 06-23/531-100Fax.: 06-23/310-703Adószám: 10539260-2-13
Rajzszáma:
Referenciaszám:
Megrendelő:
–
2012. november
HomlokzatokLINDAB TORNACSARNOK
MINTAÉPÜLET 2.
2
1
4
3
2
Lindab PLX korcolt lemezfedés, .................(...) szín, Elite bevonat
31
2
2
Lindab falpanel.................(...) szín
Lindab Rainline 190/120 ereszcsatorna, .................(...) szín, Elite bevonat
4
4
55
6
5
Ablak szegélyezés, Lindab síklemez, .................(...) szín, Classic bevonat
67
Vakolt téglafalazat, .................(...) szín
T-2/IV.
7 7
7
1. Lindab roof panel signal blue (RAL 5010) colour
2. Lindab wall panel signal blue (RAL 5010) and white (RAL 9002) colour
3. Lindab Rainline 190/120 rain gutter, white (001) colour, Elite coating
4. Plastered plinth wall, grey
5. Plastered brick wall, grey
6. Lindab PLX standing seam sheet cladding, white (001) colour, Elite coating
7. Window flashing, Lindab steel sheets, interior white (078) Classic coating
Model hall no. 3 presents an example for hall equipped to a high level of standard in a spacious way. The 30-m wide and 48-m long sports hall of 1.440 m2, with flat roof and eaves height of ~12m is suitable to hold gym lessons of elementary schools or secondary educational institutions operating up to twentyfour classes. It is suited to accommodate more volleyball- and tennis-courts, two basketball-courts crossways and even handball- and indoor football-courts longways. The spacious interior allows temporary detachments, even 2 or 3 seperate practicable places. It is suitable for any kind of mass sports and leisure activities and also for organizing events.
At the longitudinal side a two-storey, lean-to roofed social block with a floor area of ~430 m2 is attached to the building, that serves the social functions at a perfect level. It is able to accommodate storage rooms, rooms for social needs (locker rooms, bathrooms, toilets, showers), medical rooms, offices, even negotiating and conference rooms. Thus the complete building is appropriate for mulitple, mulitfunctional purposes in an efficient and economical way.
Model hall no. 3
GYM HALL DIMENSIONS
Width (m) 30.0
Length (m) 48.0
Height of the eaves (m) 11.5
Roof pitch (°/%) 2°
Floo area 1.440.0
OFFICIAL COURT DIMENSIONS THE HALL CAN ACCOMMODATE
volleyball (9x18m) – 4 db handball (20x40m) – 1 db
tennis (10,97x23,77m) – 3 db futsal (20x40m) – 1 db
basketball (15x28m) – 2 db
HALL BUILDING STRUCTURE
Primary framingAnchored steel columns + steel truss-girder
Secondary framingLoad-bearing floor deck from Lindab high profile trapezoid sheet (LTP150)
Roof claddingSoft, warm-deck roof (water insulation, heat insulation, vapour barrier)
Wall cladding Brick wallwork
Roof drainage Internal gutter system
SERVICE BUILDING BLOCK ATTACHED TO THE HALL (OPTIONAL)
Place of attachment to hall longitudinal end
Width (m) 9.0
Length (m) 24.0
Height of the eaves (m) 8.0
Roof pitch (°/%) 10%
Floor area 216.0
FUNCTIONALITY OPTIONS FOR THE SERVICE SPACE
Windbreak room, entrance space
Toilet, shower
Store room, storage space Medical room
Changing rooms, lockers Offices, conference room
SPECTACULAR DRAWINGS
Please note: The model halls, buildings we present here are intended for inspiration, which can be used as a starting point for the builders’ own designs, as an aid.
Pm: 900
1 50
01
200
Pm: 9001
500
1 20
0Pm: 900
1 50
01
200
Pm: 900
1 50
01
200
Pm: 900
1 50
01
200
Pm: 900
1 50
01
200
Pm: 900
1 50
01
200
Pm: 900
1 50
01
200
Pm: 900
1 50
01
200
2 40
02
400
2 40
01
000
2 40
01
000
Pm
: 900 1 200
1 500
Pm
: 900 1 200
1 500
Pm
: 900 1 200
1 500
Pm
: 900 1 200
1 500
Pm: 6
000
1 5003 000
Pm: 6
000
1 5003 000
Pm: 6
000
1 5003 000
Pm: 6
000
1 5003 000
Pm: 6
000
1 5003 000
Pm: 6
000
1 5003 000
Pm: 6
000
1 5003 000
Pm: 6
000
1 5003 000
Pm: 6
000
1 5003 000
Pm: 6
000
1 5003 000
Pm: 6
000
1 5003 000
Pm: 6
000
1 5003 000
Pm: 6
000
1 5003 000
Pm: 6
000
1 5003 000
Pm: 6
000
1 5003 000
3 0003 000
Pm: 6 000
1 50
03
000
Pm: 6 000
1 50
03
000
Pm: 6 000
1 50
03
000
Pm: 6 000
1 50
03
000
Pm: 6 000
1 50
03
000
Pm: 6 000
1 50
03
000
Pm: 6 000
1 50
03
000
Pm: 6 000
1 50
03
000
Pm: 6 000
1 50
03
000
Pm: 6 000
1 50
03
000
Pm: 6 000
1 50
03
000
Pm: 6 000
1 50
03
000
Pm: 6 000
1 50
03
000
Pm: 6 000
1 50
03
000
Pm: 6 000
1 50
03
000
Pm: 6 000
1 50
03
000
Pm: 6 000
1 50
03
000
Pm: 6 000
1 50
03
000
Pm: 6 000
1 50
03
000
Pm: 6 000
1 50
03
000
Pm: 6 000
1 50
03
000
Pm: 6 000
1 50
03
000
Pm: 6 000
1 50
03
000
Pm: 6 000
1 50
03
000
Pm: 6
000
3 0001 500
Pm: 6
000
3 0001 500
Pm: 6
000
3 0001 500
Pm: 6
000
3 0001 500
Pm: 6
000
3 0001 500
Pm: 6
000
3 0001 500
Pm: 6
000
3 0001 500
Pm: 6
000
3 0001 500
Pm: 6
000
3 0001 500
Pm: 6
000
3 0001 500
Pm: 6
000
3 0001 500
Pm: 6
000
3 0001 500
Pm: 6
000
3 0001 500
Pm: 6
000
3 0001 500
Pm: 6
000
3 0001 500
Pm: 6 000
3 00
01
500
Pm: 6 000
3 00
01
500
Pm: 6 000
3 00
01
500
Pm: 6 000
3 00
01
500
Pm: 6 0003 00
01
500
Pm: 6 000
3 00
01
500
Pm: 6 000
3 00
01
500
Pm: 6 000
3 00
01
500
Pm: 6 000
3 00
01
500
Pm: 6 000
3 00
01
500
Pm: 6 000
3 00
01
500
Pm: 6 000
3 00
01
500
3 00
03
000
Pm: 9
00
1 5001 200
Pm: 9
00
1 5001 200
Pm: 9
00
1 5001 200
2 4001 000
6 000 6 000 6 000 6 000 6 000 6 000 6 000 6 000
48 000
9 50
030
000
39 5
00
750 1 500 1 500 1 500750 750
1 500 1 500 1 500750
7351 200
6501 200
6501 200
365500
1 000300
2 400300
1 000500
7351 200
6501 200
6501 200
365365
1 200650
1 200650
1 200735
750
1 500 1 500 1 500750 750
1 500 1 500 1 500 750
4 50
04
500
500
750
1 50
01
500
1 50
075
075
01
500
1 50
01
500
750
750
1 50
01
500
1 50
075
075
01
500
1 50
01
500
750
750
1 50
01
500
1 50
075
0
840
1 20
084
01
20042
0 4201
200
2 88
050
06
000
6 00
06
000
6 00
06
000
longitudinal bracing
longitudinal bracing
longitudinal bracing
longitudinal bracing
I. II. III. IV.
SERVICE BLOCK216 m2ceramic
B
SPORTS HALL1440 m2
sports flooring
B
C
D
VI. VII.V. VIII. IX.
A
B
TENNIS TENNISTENNIS
A
VOLLEYBALLVOLLEYBALL VOLLEYBALLVOLLEYBALL
BASKETBALL BASKETBALL
HANDBALL
AProjekt neve:
AlaprajzRajz neve:
Készítette:
Ellenőrizte:
Méretarány:
Dátum:
2051 Biatorbágy, Állomás u. 1/aTel.: 06-23/531-100Fax.: 06-23/310-703Adószám: 10539260-2-13
Rajzszáma:
Referenciaszám:
Megrendelő:
–
2012. november
LINDAB TORNACSARNOKMINTAÉPÜLET 3.
T-3/I.
5009 000
+2,80
+6,00
+9,00
30 000
+0,90
+2,40
+4,90
+6,40
-0,20
+12,30
6 0006 0006 0006 0006 0006 0006 0006 000
6 0006 0006 0006 0006 0006 0006 0006 000
500 9 000
+2,80
+6,00
+9,00
30 000
+0,90
+2,40
+4,90
+6,40
+6,00
+9,00
+6,00
+9,00
-0,20
+12,30
+2,80
+6,00
+9,00
+0,90
+2,40
+4,90
+6,40
-0,20
+12,30
-0,20
+12,30
5,71° = 10 %
5,71° = 10 %
1
BACKSIDE FACADE
LINDAB TORNACSARNOKMINTAÉPÜLET 3.
3
3
21
T-3/IV.
1
Projekt neve: Rajz neve:
Készítette:
Ellenőrizte:
Méretarány:
Dátum:
2051 Biatorbágy, Állomás u. 1/aTel.: 06-23/531-100Fax.: 06-23/310-703Adószám: 10539260-2-13
Rajzszáma:
Referenciaszám:
Megrendelő:
–
2012. november
Homlokzatok
1
2
FRONT FACADE RIGHTSIDE FACADE
LEFTSIDE FACADE
Vakolt téglafalazat .................(...) szín
Lindab Rainline 190/120 ereszcsatorna, .................(...) szín, Elite bevonat
Lindab PLX korcolt lemezfedés, .................(...) szín, Elite bevonat
1
1 11
1 20
011
500
30 000
-1,40-0,20
±0,00
+8,00
500 9 000
-1,40-0,20
±0,00
+11,30
+12,30
±0,00
5,71° = 10 %
2,0°
foundations (according to static specifications)
"LR" truss girder structure(according to static specifications)
1
5
(external dimensions of primary frame)
3
(ext
erna
l eav
es h
eigh
t of f
ram
e st
ruct
ure)
4
2
Projekt neve: Rajz neve:
Készítette:
Ellenőrizte:
Méretarány:
Dátum:
2051 Biatorbágy, Állomás u. 1/aTel.: 06-23/531-100Fax.: 06-23/310-703Adószám: 10539260-2-13
Rajzszáma:
Referenciaszám:
Megrendelő:
–
2012. november
A-A metszet T-3/II.LINDAB TORNACSARNOK
MINTAÉPÜLET 3.
ORDER OF LAYERS:
waterproof PVC membranestep-proof mineral wool heat insulation 16-20 cmvapour barrierLindab LTP 150 load-bearing floor deck profilesteel frame structure
1
heat insulated facade system 10 cmbrick wall 30 cm2
3 Lindab PLX standing seam roofingwooden boarding (2,4 cm)5x5 cm counter batten every 1 m with ventilated air spaceLindab LTP 20 trapezoid cladding (2 cm)LTF 180 breathable construction foilLindab Z 200 purlin system20 cm mineral wool heat insulation betweenLPZ 110 vapour barriergypsum plasterboard supporting frame (2 cm)2 ply gypsum plasterboard cladding (2,5 cm)
4 interior plaster (1 cm)hollow block brick wall (38 cm)facade heat insulation system (5 cm)exterior plaster (1,5 cm)
5 2-3 cm sport flloring8-10 cm floor slabPE technological membrane8-10 cm step-proof heat insulationdamp-proof membrane15-20 reinforced concrete flooring25-30 cm gravel filloriginal soil
6 0006 0006 0006 0006 0006 0006 0006 000
±0,00
+9,80
+11,30
-0,20
±0,00
+12,30
foundations (according to static specifications)
1
5
2
Projekt neve: Rajz neve:
Készítette:
Ellenőrizte:
Méretarány:
Dátum:
2051 Biatorbágy, Állomás u. 1/aTel.: 06-23/531-100Fax.: 06-23/310-703Adószám: 10539260-2-13
Rajzszáma:
Referenciaszám:
Megrendelő:
–
2012. november
LINDAB TORNACSARNOKMINTAÉPÜLET 3.
waterproof PVC membranestep-proof mineral wool heat insulation 16-20 cmvapour barrierLindab LTP 150 load-bearing floor deck profilesteel frame structure
1 heat insulated facade system 10 cmbrick wall 30 cm2
ORDER OF LAYERS:
B-B metszet T-3/III.
5 2-3 cm sport flloring8-10 cm floor slabPE technological membrane8-10 cm step-proof heat insulationdamp-proof membrane15-20 reinforced concrete flooring25-30 cm gravel filloriginal soil
GROUND PLAN
SECTIONS
ELEVATION
1.440 m2Possible application: elementary and secondary schools with 8, 16 an 24 classes
1. Plastered brick wall in colours of the spectacle
2. Lindab Rainline 190/120 rain gutter, dark grey (087) colour, Elite coating
3. Lindab PLX standing seam profile, dark grey (087) colour, Elite coating
1 20
011
500
30 000
-1,40-0,20
±0,00
+8,00
500 9 000
-1,40-0,20
±0,00
+11,30
+12,30
±0,00
5,71° = 10 %
2,0°
foundations (according to static specifications)
"LR" rácsos keretszerkezet(according to static specifications)
1
5
(external dimensions of primary frame)
3
(ext
erna
l eav
es h
eigh
t of f
ram
e st
ruct
ure)
4
2
Projekt neve: Rajz neve:
Készítette:
Ellenőrizte:
Méretarány:
Dátum:
2051 Biatorbágy, Állomás u. 1/aTel.: 06-23/531-100Fax.: 06-23/310-703Adószám: 10539260-2-13
Rajzszáma:
Referenciaszám:
Megrendelő:
–
2012. november
A-A metszet T-3/II.LINDAB TORNACSARNOK
MINTAÉPÜLET 3.
ORDER OF LAYERS:
waterproof PVC membranestep-proof mineral wool heat insulation 16-20 cmvapour barrierLindab LTP 150 load-bearing floor deck profilesteel frame structure
1
heat insulated facade system 10 cmbrick wall 30 cm2
3 Lindab PLX standing seam roofingwooden boarding (2,4 cm)5x5 cm counter batten every 1 m with ventilated air spaceLindab LTP 20 trapezoid cladding (2 cm)LTF 180 breathable construction foilLindab Z 200 purlin system20 cm mineral wool heat insulation betweenLPZ 110 vapour barriergypsum plasterboard supporting frame (2 cm)2 ply gypsum plasterboard cladding (2,5 cm)
4 interior plaster (1 cm)hollow block brick wall (38 cm)facade heat insulation system (5 cm)exterior plaster (1,5 cm)
5 2-3 cm sport flloring8-10 cm floor slabPE technological membrane8-10 cm step-proof heat insulationdamp-proof membrane15-20 reinforced concrete flooring25-30 cm gravel filloriginal soil
6 0006 0006 0006 0006 0006 0006 0006 000
±0,00
+9,80
+11,30
-0,20
±0,00
+12,30
foundations (according to static specifications)
1
5
2
Projekt neve: Rajz neve:
Készítette:
Ellenőrizte:
Méretarány:
Dátum:
2051 Biatorbágy, Állomás u. 1/aTel.: 06-23/531-100Fax.: 06-23/310-703Adószám: 10539260-2-13
Rajzszáma:
Referenciaszám:
Megrendelő:
–
2012. november
LINDAB TORNACSARNOKMINTAÉPÜLET 3.
waterproof PVC membranestep-proof mineral wool heat insulation 16-20 cmvapour barrierLindab LTP 150 load-bearing floor deck profilesteel frame structure
1 heat insulated facade system 10 cmbrick wall 30 cm2
ORDER OF LAYERS:
B-B metszet T-3/III.
5 2-3 cm sport flloring8-10 cm floor slabPE technological membrane8-10 cm step-proof heat insulationdamp-proof membrane15-20 reinforced concrete flooring25-30 cm gravel filloriginal soil
6 0006 0006 0006 0006 0006 0006 0006 000
±0,00
+9,80
+11,30
-0,20
±0,00
+12,30
foundations (according to static specifications)
1
5
2
Projekt neve: Rajz neve:
Készítette:
Ellenőrizte:
Méretarány:
Dátum:
2051 Biatorbágy, Állomás u. 1/aTel.: 06-23/531-100Fax.: 06-23/310-703Adószám: 10539260-2-13
Rajzszáma:
Referenciaszám:
Megrendelő:
–
2012. november
LINDAB TORNACSARNOKMINTAÉPÜLET 3.
waterproof PVC membranestep-proof mineral wool heat insulation 16-20 cmvapour barrierLindab LTP 150 load-bearing floor deck profilesteel frame structure
1 heat insulated facade system 10 cmbrick wall 30 cm2
ORDER OF LAYERS:
B-B metszet T-3/III.
5 2-3 cm sport flloring8-10 cm floor slabPE technological membrane8-10 cm step-proof heat insulationdamp-proof membrane15-20 reinforced concrete flooring25-30 cm gravel filloriginal soil
References
Lindab building solutions for gymnasiums and sports halls from the smallest to the largest!
Take a look at some of the realized sport institutions, gym halls, where the idea of a school, district or city got into shape with the application of Lindab products. It can be about a sportspace with 400-500m2 floorspace or even a hall with a floorspace of 10.000m2.Every unique idea and plan can be put into practice by Lindab products and systems according to the respective needs of a school, local government, sport institution or an investor.
Building: City sportcenreLocation: Sátoraljaújhely (Borsod-
Abaúj-Zemplén megye / HUNGARY)
Construction year: 2002Hall size: ~28x55m (~1540m2)Lindab products: Construline purlin- and wall-stud system, Coverline roof- and wall-cladding tra-peziodal profiles (LTP45, LVP20), Rainline rainwater system, flashings
Building: Angyalföldi Láng sporthall extension
Location: Budapest XIII. ker. / HUNGARY
Construction year: 2010Hall size: 20,4x46,2m
(~950m2)Lindab products: LTP150 load-
bearing trapezoid profiles (Coverline productgroup)
Building: City sportcentreLocation: Alsózsolca (Borsod-Abaúj-Zemplén megye / HUNGARY)Hall size: ~ 1 500 m2
Lindab products: Construline purlin and wall-stud system, Coverline roof- and wall-cladding trapezoidal profiles (LTP45, LVP20), Rainline rainwater system, flashings
Building: Gym hall of elementary schoolLocation: Nagyharsány (Baranya megye / HUNGARY)Construction year: 1994Hall size: ~800m2
Lindab products: Construline purlin- and wall-stud system, Topline tile effect roof cladding, Coverline external and internal wall cladding trapezoid profiles (LVP20), Rainline rainwater system, flashings
Building: Gym hall of elementary schoolLocation: Leányfalu (Pest megye / HUNGARY)Construction year: 2010Hall size: ~550m2
Lindab products: Construline purlin system, Coverline roof cladding trapezoid profile (LTP45), Rainline rainwater system, Protectline roof safety system (pipe snow guard), flashing
Building: Gym hall of elementary school, flat roof reconstruction
Location: Nagykovácsi (Pest megye / HUNGARY)
Construction year: 2011Hall size: 15x30m (~450m2)Lindab products: Coverline roof cladding trapezoid profile (LTP45), Rainline rainwater system, Protectline roof safety system (pipe snow guard), flashings
References
Building: Friends Arena (the stadium of AIK Stockholm club and Swedish national football team)
Location: Stockholm (Sweden)Construction year: 2009-2011Hall size: 68x105m courtsize
(7140m2), 50.000 seating capacity
Lindab products: Lindab high profile load-bearing trapezoid sheets (~22.000m2), special stainless self-drilling screws (~400.000pcs), Lindab Ventilation system (~17.000m total length)
Sporthall Vara, Sweden Floor area: 2 500 m2
Lindab products: Lindab trapezoid sheets
Building: Lindab Arena (Ice-hall) Ängelholm, SwedenSize: 3.000 seating capacity sports hallLindab products used: Lindab trapezoid sheets
Building: Icerink hall, SwedenFloor area: 2 500 m2
Lindab products used: Lindab trapezoid sheets
References
Building: Cluj Arena (The stadium of the Romanian footbal club, FC Universitatea Cluj)Location: Cluj, RomaniaConstruction year: 2009-2011Hall size: 68x105m courtsize (7140m2), ~30.500 seating capacityLindab products: Special sheet metal roof and wall cladding. Special multicoloured, opaled coating; unique, dual curvature standing seam roof cladding (~20.000m2) and wall cladding (~2000m2); perforated facade wall cassettes (~5000m2)
Technical aspects and parametersThe directives of the European Union concerning the construction industry set out the basic requirements for buildings. According to these aspects, we sum up here the options offered by Lindab’s product groups.
“Mechanical resistance and stability” – the design and construction of framing structures of compliant load-bearing capacity on the long run are ensured by the use of high-strength steel materials and optimized dimensions, as well as our self-developed structural dimensioning tools (charts, softwares).
“Safety in case of fire” – There are a number of laboratory tests, standard calculations and qualifications available as regards the fire-protection classes and performance parameters (fire-resistance limit values) under applicable European standards (EN) of Lindab products and systems. By the help of these tools, the required framing solutions or sheeting systems can always be specified for the requested fire safety level.
“Hygiene, health and the environment” – The materials of Lindab light gauge steel products, throughout their entire life span, do not contain components, which are harmful to human health or the environment. A men-tion must be made here that the steel raw material is recyclable, and the minimum quantities of wastes produced in the manufacture and construction works phase does not impose a burden to the environment.
“Safety of use” – In connection with this aspect it is worth mentioning that the durability of Lindab steel prod-ucts is ensured by a multi-layer coating system applied over a hot-dip galvanized surface that ensures corrosion protection.
“Protection against noise” – Two major areas should be distinguished in terms of acoustics: sound inhibition and sound absorption. For “sound inhibition” (where the task of the surface structural element in question is to ensure that the lowest possible part of a sound effect generated at one side should be detected at the other side), various Lindab assembled roof- and wall-cladding systems and pre-fabricated sandwich panels are available, with various test results, on the basis of which the required solution can be selected. Where “sound absorption” is prescribed (where the impact of a noise source located at one – generally the inner – side of the surface structure must be reduced for such „receivers” who are located at the same side of the surface structure in question), the application of perforated wall cladding sheets (pierced densely by small-size holes) offers an excellent solution.
“Energy economy and heat retention” – For buildings, on of the most important points of view today is the amount of energy they require for the purpose of use (heating and/or cooling, ventilation or other technologies), as this factor has a significant impact on operation costs. From among all the building structures, the thermal insulation capabilities of roof- and wall-claddings are the decisive parameters. The roof- and wall-cladding systems offered by Lindab provide a very wide choice also in terms of thermal insulation levels; the lightweight, thermal-insulated solu-tions are capable of meeting needs from a slightly tempered one to even a passive-building-level performance, with small spacings between the various solutions. The thermal insulation capability of building elements must always be specified individually, in a circumspect manner, based on relevant needs and prescriptions.
“Sustainable use of natural resources” – From this point of view it is important to emphasize that Lindab’s roofing systems (producing especially large areas in case of halls for instance) allow for an excellent opportunity for the use of the various solar systems being on the market (solar collectors for hot water or heating, or electricity generating solar cells). In the case of each different Lindab roof-cladding system (trapezoidal profiles, tile-effect roof sheets, sandwich panels or standing seam roof sheets), pre-engineered accessory system components are available for accommodating and fastening solar components on the roof safely (through load-bearing and watertight connections).
Product identification and certificates of conformityAs the realization process in the construction industry involves a number of players in most cases (design, production, sales, installation/construction works, general contracting, and organisation), it is of major importance to ensure the identification of makes and products, and the control of their technical conformity in every phase of a project. Identification of products at the building site is not always easy. For this end, the products manufactured by Lindab are marked by a videojet marking (product type, profile, serial number, date of production, etc.); while certain components are stamped in a raised print by the „Lindab” brand name (e.g. the joining ends of gutters), promoting a clear identification of Lindab products. Product identification is important also to ensure the assignment of products to quality documentations whose release is mandatory by law (ÉME, TMI, CE-mark, Declaration of Conformity).
Contact, quotations, informationIn specific questions related to hall systems, framing or sheeting elements, Lindab Kft.’s people are pleased to be available to your valued inquiry throughout the design, preparation, tendering (consignation, quotation-preparation) and the construction works phases.Please ask for our free professional consultation, and please do not hesitate to contact us with your special inquiries!
Budapest, Pest megye
Polgár Dávid 06 30 248-2391 [email protected]
Csongrád, southern part of Pest megye and Bács-Kiskun megye
Kelemen Kornél 06 30 708-6463 [email protected]
Veszprém, Vas, Fejér and Győr-M-S and Komárom-Esztergom
Móricz Gábor 06 30 708-6462 [email protected]
Zala and Somogy, Tolna and Baranya megye
Devecz Tamás 06 30 433-1603 [email protected]
Jász-Nagykun-Szolnok, Hajdú-Bihar and Békés megye
Kulcsár Viktor 06 30 433-2064 [email protected] Nógrád, Heves, Borsod-A-Z and Szabolcs-Szatmár-Bereg megye
Fülep Attila 06 30 433-1795 [email protected]
Design consultantMolnár István06 30 [email protected]
Engineering, structural and fire-safety questionsKotormán István06 30 [email protected]
Sales, quotationErőss Zoltán06 30 [email protected]
On-site project coordination, professional consultation and plans, design issues
2051 Biatorbágy, Állomás u. 1/A.Tel.: +36-23-531-300, Fax: +36-23-531-141
www.lindab.hu/csarnokwww.lindab.hu
Lindab Profil
fehér alapra
fehér alapra
színes alapra