8/12/2019 LINCOLN. Mod 1292. Serie D..pdf

1/2

HIGH PRESSURE PUMP Model 12 OR 35 LB. ORIGINAL CONTAINER Series D

790606603110472 40117

6706940480

45744

3416612909

31074

5852 5070248051

45859 6613091694

91695

1354562217480525503510973550721046916521 16520 34602 4808351112 6142034166310741047240480

82125BARE PUMPASSEMBLY

457446603140117 ndic tes ch ng

A DIVISION LIN OLN ST LOUIS McNEIL SECTION - J244010 GOODFELLOWLVD ST LOUIS,MO 63120 314) 3835900 CORPORATION PAGE - 16C

L-DEC-80 Printed in United States of America FORM 43

8/12/2019 LINCOLN. Mod 1292. Serie D..pdf

2/2

12512 48313 56136 1624912514 34261 6601145241 5852 HYDRAULIC COUPLERWIPE FITTING CLEAN BEFORE LUBRICATINGPush COUPLERon to FITTING at a alight angle, then centerCOUPLER on FITTING. COUPLER JAWS grip FITTING HEADforming a tight seal when LUBRICANT pressure is developedby the LEVERGUN. To remove COUPLER turn at slight angleto release grip of COUPLERJAWS. For replacement JAWS orderNo. 82154 KIT which contains 6 No. 45241 JAWS.

The Model 1292 PUMP is manually operated to dispense grease from a 25 or 35 pound ORIGINALCONTAINER.The DRUM COVER is adjustable for various height CONTAINERS. A CLAMP, 45859, is provided tosecure PUMP to DRUM COVER by tightening the THUMB SCREW, 50702.Three THUMB SCREWS, 66130, hold the DRUM COVER to the CONTAINER.

OPERATING INSTRUCTIONSRaise PUMP HANDLE until a slight resistance to the up-

ward movement of the HANDLE can be felt. Position B). Toinsure maximum lubricant delivery, the full pumping rangefrom position B to the bottom stop, position C) shouldbe used.

AUTOMATIC PRESSURE RELEASEThe slight resistance felt when the

to position B indicates the ventingis between positions A and B.

Before removing COUPLER from

PUMP HANDLE is raisedrange. Venting range

FITTING, after lubrica-tion is completed, raise PUMP HANDLE to position A. Thisopens a CHECK VALVE which allows the lubricant to drainfrom HOSE, through the PUMP TUBE and back into the CON-TAINER

SERVICE PARTSPART QUAN

5852 110469 110472 310973 112512 112514 112909 113545 116249 116520 116521 131074 134166 1

DESCRIPTION PARTHydraulic coupler 34261Pump check 34802Toggle pin 40117Stop washer 40480Coupler cap 45241Nozzle body 45744Adapter 45859Connectinng rod 48051Coupler body 48052Piston washer upper) 48083Pump cylinder 48313Gasket 50702O-ring 51112

QUAN. DESCRIPTION1 Coupler packing1 Piston packing1 Handle1 Outlet body3 Coupler jaw1 Toggle1 clamp1 Washer1 Washer1 Piston washer lower)1 Packing washer1 Thumb screw1 Connecting rod nut

PART55035550725613661420622176601166031661306706979060821259169491695

QUAN1111113311111

DESCRIPTIONSpringCheck springspringCylinder tubePump tubeBallCotter pinThumb screwAdapterHoseBare pump assemblyDrum coverFollower

RETAIN THIS INFORMATION FOR FUTURE REFERENCEWhen ordering replacement parts, list: Part Number, Description, Model Number, and Series Letter.LINCOLN ST. LOUIS provides a Distributor Network that stocks equipment and replacement parts.

A list of Authorized Service Departments will be furnished upon request.